PVC-C metric Fittings
|
|
|
- Claribel Russell
- 6 years ago
- Views:
Transcription
1 Fittings Ben 90, PVC-C Raius = 2 Raius = 2 PN Coe SP kg z Ben 90, short pattern, PVC-C Raius = 0,75 Raius = 0,75 PN Coe SP kg z
2 Elbow 90, PVC-C PN Coe SP kg z Elbow 45, PVC-C PN Coe SP kg z
3 Tee 90, PVC-C PN Coe SP kg z Tee 45, PVC-C PN Coe SP kg z z
4 Crosses, PVC-C PN Coe SP kg z Tees 90 reucing, PVC-C *Tee 90 elivere with the require reucing bushes 1 PN Coe SP kg z z * * * * *
5 Socket, PVC-C PN Coe SP kg z Reucing Bush (Short pattern), PVC-C 1 PN Coe SP kg z
6 Reucing Bushes ong, PVC-C Moel: With spigot an solvent cement socket 1 PN Coe SP kg z Cap, PVC-C PN Coe SP kg Hose Nozzle, PVC-C PN Coe SP kg
7 Aaptor Fittings Elbows 90, PVC-C Moel: With BSP parallel female threa (Rp) reinforce (A2) Reinforcing ring stainless (A2) Connection to plastic or metal o not use threa sealing pastes that are harmful to PVC-C Install with low mechanical stress an avoi large cyclic temperature changes Rp PN Coe SP kg z1 z / / / / Socket, PVC-C Moel: With solvent cement socket metric an parallel female threa Rp Reinforcing ring stainless (A2) Connection to plastic or metal o not use threa sealing pastes that are harmful to PVC-C Install with low mechanical stress an avoi large cyclic temperature changes Rp PN Coe SP kg z s 20 1 / / / / Reucing Bushes metric-rp, PVC-C Moel: With solvent cement spigot metric an parallel female threa Rp Reinforcing ring stainless (A2) Connection to plastic or metal Install with low mechanical stress an avoi large cyclic temperature changes Rp PN Coe SP kg Z s 20 3 / / / / /
8 Aaptor Nipples, PVC-C Moel: With solvent cement spigot metric an taper male threa R Connection to plastic threa only o not use threa sealing pastes that are harmful to PVC-C Install with low mechanical stress an avoi large cyclic temperature changes R PN Coe SP kg z s 16 3 / Aaptor Socket-Nipple, PVC-C Moel: With solvent cement spigot/socket metric an taper male threa R Connection to plastic threa only o not use threa sealing pastes that are harmful to PVC-C Install with low mechanical stress an avoi large cyclic temperature changes R 1 PN Coe SP kg z z1 s 16 1 / / / /
9 Unions Solvent Cement Unions, PVC-C Moel: Union en: Solvent cement socket metric Union bush: Solvent cement socket metric Gasket: O-Ring EPM No , FPM No PN EPM Coe FPM Coe SP kg z1 z2 1 2 G/Tr / / / / / Tr108x Tr128x Tr154x6 20
10 Aaptor Unions, PVC-C metric-rp Moel: Union en: Solvent cement socket metric Union Bush: Parallel female threa Rp Gasket: O-Ring EPM No , FPM No Connection to plastic threa only o not use threa sealing pastes that are harmful to PVC-C Rp PN EPM Coe FPM Coe SP kg z1 z2 1 2 G 16 3 / / / / / / / / / / Aaptor Unions, PVC-C metric-astm Moel: Union en: solvent cement socket inch ASTM Union bush: Solvent cement socket metric Gasket: O-Ring EPM No , FPM No Inch PN EPM Coe FPM Coe SP kg z1 z2 1 2 G 16 3/ /4 20 1/ / / / / / / /4 21
11 Aaptor Unions, Stainless Steel / PVC-C metric - Rp Moel: Union En: stainless steel WN (316), parallel female threa Rp Union Bush: Solvent cement socket PVC-C metric Union nut: PVC-C Gasket: O-Ring EPM No , FPM No Rp PN EPM Coe FPM Coe SP kg 16 3 / / / / / z1 z2 1 2 G s / / / / / Aaptor Unions, Stainless Steel / PVC-C metric - R Moel: Union En: stainless steel WN (316), taper male threa R Union Bush: Solvent cement socket PVC-C metric Union nut: PVC-C Gasket: O-Ring EPM No , FPM No R PN EPM Coe FPM Coe SP kg 16 3 / / / / / z 1 2 G s / / / / /
12 Aaptor Unions, Stainless Steel / PVC-C metric - Weling En Moel: Union En: Stainless steel (316) with weling en Union Bush: Solvent cement socket PVC-C metric Union Nut: stainless steel WN (316) Gasket: O-Ring EPM No , FPM No PN EPM Coe FPM Coe SP kg z 1 2 e G s / / / / / Aaptor Union Malleable Iron/ PVC-C Rp-metric Moel: Union En: PVC-C, solvent cement Union Bush: Malleable iron galvanize parallel female threa (Rp) Union Nut: malleable iron galvanize Gasket: Flat gasket No EPM Rp PN Coe kg z G 1 2 S1 S / / / / / / / /
13 Aaptor Unions Malleable Iron / PVC-C R-metric Moel: Union En: PVC-C, solvent cement Union Bush: Malleable iron galvanize, taper male threa (R) Union Nut: malleable iron galvanize Gasket: Flat gasket No EPM R PN Coe kg z G 1 2 S1 S / / / / / / / / Aapter Union Brass / PVC-C Rp-metric Moel: Union En: PVC-C, solvent cement Union Bush: Brass BSP parallel female threa (Rp) Union Nut: brass Gasket: Flat gasket No EPM Rp PN Coe kg z G 1 2 S1 S / / / / / / / / / /
14 Aaptor Unions Brass / PVC-C R-metric Moel: Union En: PVC-C, solvent cement Union Bush: Brass, BSP, taper male threa R Union Nut: brass Gasket: Flat gasket No EPM R PN Coe kg z G 1 2 S1 S / / / / / / / / / /
15 Union En, PVC-C Moel: For union PN Coe SP kg z Union Ens, PVC-C ASTM Moel: Solvent cement socket ASTM Inch PN Coe SP kg z 1 3/ / / / /
16 Union Bush, PVC-C Moel: Solvent cement socket metric For union Jointing face: with O-Ring groove Gasket: O-Ring EPM No , FPM No PN Coe SP kg z G/Tr / / / / / Tr108x Tr128x Tr154x Union Bushes Rp, PVC-C Moel: With parallel female threa Rp Jointing Face: with O-Ring groove Gasket: O-Ring EPM No , FPM No Connection to plastic threa only o not use threa sealing pastes that are harmful to PVC-C Rp PN Coe SP kg z G 3 / /4 1 / / / /2 1 1 / / / /4 27
17 Union Nut, PVC-C Moel: For union PN Coe SP kg G/Tr / / / / / Tr108x Tr128x Tr154x6 28
18 Flange Aaptors Flange Aaptor (Serrate face), PVC-C Moel: Jointing faces serrate Counterpart: Flange Aaptor No Gasket: Flat gasket No EPM or No FPM Flange: No , , an 225 can be use as serrate or flat flange aaptor PN Coe SP kg z Flange Aaptor, with O-ring groove, PVC-C Moel: Jointing Face: with O-Ring groove Counterpart: Flange Aaptor No Gasket: O-ring EPM No , FPM No Flange: No , , PN Coe SP kg z
19 Flanges PVC-C Backing Flange for Socket Systems metric Moel: Connecting imension: ISO 2501 PN 10 Maximum temperature +60 C Material: PVC-C N PN Coe SP kg H r A SC M M M M Backing Flanges, PP-V for Socket Systems metric Moel: Moern full-plastic flange PP-GF (30 % glass-fibre reinforce) With V-groove which applies force evenly on collar With integrate bolt retainers as an assembly ai Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10 ¹) Suitable for socket- an butt fusion systems (no pictograph on flange) N PN Coe H A SC ¹ M12 ¹ M12 ¹ M12 ¹ M16 ¹ M16 ¹ M16 ¹ M M M M M M M M M M20 30
20 Backing Flanges, PP-V for Butt Fusion Systems metric Moel: Moern full-plastic flange PP-GF (30 % glass-fibre reinforce) With V-groove which applies force evenly on collar With integrate bolt retainers as an assembly ai Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10 ¹) Suitable for socket- an butt fusion systems (no pictograph on flange) N PN Coe H A SC ¹ M12 ¹ M12 ¹ M12 ¹ M16 ¹ M16 ¹ M16 ¹ M M M M M M M M M M M M Backing Flanges, PP/Steel for Socket Systems metric Moel: Material: PP (30 % glass-fibre reinforce) with steel ring Connecting imensions: ISO 7005 / EN 1092 / IN 2501 PN10 ¹) Attention: bolt circle accoring ISO 2536 N PN Coe SP kg H A SC M M M M M M M M M M M M M M M20 * M M M M M24 31
21 Backing Flanges, PP/Steel for Butt Fusion Systems metric Moel: Material: PP (30 % glass-fibre reinforce) with steel ring Connecting imensions: ISO 7005 / EN 1092 / IN 2501 PN10 N PN Coe H A SC M M M M M M M M M M M M M M M M M M M M Backing Flanges, PP-V for Socket Systems Inch/ANSI Moel: Moern full-plastic flange PP-GF (30 % glass-fibre reinforce) With V-groove which applies force evenly on collar With integrate bolt-fixing as an assembly ai Connection imensions accoring to ANSI B 16.5, ASTM 4024; bolt circle class 150 ¹) Suitable for socket- an butt fusion systems (no pictograph on flange) N Inch PN Coe kg H A SC 15 1/ M / M M / M / M M / M M M M M M M20 32
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
CHAPTER 4 PIPES. Prof. Dr. Uğur Atikol
CHAPTER 4 PIPES Prof. Dr. Uğur Atikol History Materials: Lead used to be very popular material due to its availability, durability and ease of working. It had environmental problems Industrial developments
Bid Opportunity PLUMBING SYSTEMS Section Installation of Boiler Heating Systems Page 1 of 7 Centennial Pool, 90 Sinclair
Installation of Boiler Heating Systems Page 1 of 7 SECTION PAGE PART 1 GENERAL 2 1.1 General 2 1.2 Reference 2 1.3 Work Included 2 1.4 Related Work Specified Elsewhere 2 PART 2 PRODUCTS 3 2.1 Pipe and
TAPPING SADDLES DN 40 - DN 450
TAPPING SADDLES 0-0 FAST, PERMANENT TAPPING SOLUTION FOR BOTH RIGID AND FLEXIBLE PIPE TYPES FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated (depending
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
WANG TAPPING SADDLES. fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES DESCRIPTION APPLICATION TECHNICAL DATA
WANG TAPPING SADDLES 0-0 fast, permanent tapping SOLUTION FOR BOTH rigid and flexible pipe types FEATURES bodies are manufactured from either stainless steel or Ductile Iron Fusion Bonded Epoxy coated
Read Only Document Not For Distribution
Chapter 4 4.1 GENERAL REQUIREMENTS Joints and Connections 4.1.1 Tightness Joints and connections in the plumbing system shall be gas tight and watertight for the pressure required by test, with the exceptions
Code. 1) Code. Standard or Specification. Bolting
Code 1. Code 1) Code (1) ASME B 31.1 : Power Piping (2) ASME B 31.3 : Process Piping (3) ASME B 31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 2) Material Code Bolting
CAST STEEL VALVES GATE, GLOBE & CHECK CAST STEEL VALVES 3
CAST STEEL VALVES GATE, GLOBE & CHECK CAST STEEL VALVES 3 KVC (UK) LTD SUPPLY RANGE Gate, globe an check valves are supplie in sizes ranging from 2 thru 48 ; pressure ranges 150lb thru 2500lb incluing
AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017
AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017 Technical introduction AVK is a new patented range of composite push fittings combining the safety and strength of a traditional mechanical fitting
Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More
Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products
SAINT PETERSBURG CITY COUNCIL. Consent Agenda. Meeting of April 3, The Honorable James Bennett, Chair and Members of City Council
SAINT PETERSBURG CITY COUNCIL Consent Agenda Meeting of April 3, 2008 To : The Honorable James Bennett, Chair and Members of City Council Subject : Renewing a strategic partnership agreement with HD Supply
PP-n... the Natural Polypropylene
PP-n... the Natural Polypropylene PP-n Natural PP-BCF /IR The Summary of Safety and Performance Complete Fusion Joined Plastic Piping Systems for Industrial and Institutional Applications www.us.piping.georgefischer.com.
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
Standard Tube & Pipe Adapters
Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10,
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 2017/0/12 1/ This specification describes the minimum requirements for piping systems for the following service: Process Water or Underground Dewatering Service piping systems at pressures
Section B: Fittings and Accessories Effective Date: Revision #: 1
B 1 PVC Fittings - Schedule 40 B 2 PVC Fittings - Schedule 80 B 3 HDPE Flange & Mechanical Joint Adapters (AWWA C 906) B 4 B 5 HDPE Pipe Wall Stiffeners Plastic Fittings (SDR-21) B 6 PVC Fittings - Gasketed
Request for Bids Water Department. City of Portsmouth, New Hampshire Water Inventory Bid #33-08
Request for Bids Water Department City of Portsmouth, New Hampshire Water Inventory Bid #33-08 1 Bid #33-08 Portsmouth, New Hampshire Public Works Department Water Inventory INVITATION TO BID Sealed bid
Flexible metal hoses
Flexible metal hoses General information Use of hoses of hoses of braiding Bending radius Thermal resistance Pressure resistance Protection of hoses Metal hoses are flexible corrugated metal pipes manufacture
Table of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
VIKING JOHNSON EASIRANGE. Repair and Tapping Solutions
VIKING JOHNSON EASIRANGE Repair and Tapping Solutions EasiRange Repair and Tapping Solutions A C The Viking Johnson EasiRange has been developed to provide a comprehensive range of pipe repair and tapping
Pipe OD. KT1-075T0?? in the typical specifying. offtake size as shown
Tapping s - PN OPERATING PRESSURE rigid and flexible pressure pipe RIGI-TAP FLEXI-TAP VARI-TAP Pipe 0 0 0 00 0 00 0 00 0 00 0 RIGID PIPE FLEXIBLE PIPE DICL Steel CICL AC ABS* GRP* RC PVC HDPE MSCL GWI
THOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
SECTION PLUMBING PIPING
SECTION 22 1000 PLUMBING PIPING PART 1 GENERAL 1.1 QUALITY ASSURANCE A. Perform Work in accordance with authority having jurisdiction standards. Utilize products as indicated in drawings and as allowed
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 2017/0/12 1/ This specification describes the minimum requirements for piping systems for the following service: Process Water or Underground Dewatering Service piping systems at pressures
This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,
SECTION FACILITY STORM DRAINAGE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 22 14 00 Storm drainage systems, including piping and all necessary accessories as designated in this section. 1.2 RELATED WORK A. Penetrations in rated enclosures:
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC PIPES AND TUBES
SECTION 23 20 00 - HVAC PIPES AND TUBES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes pipe and pipe fittings for: heating water, chilled water, steam and steam condensate, condenser water, glycol,
Meter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
HAWLE-range of products
HAWLE-pRODucTS All OvER ThE world since 1948 HAWLE-range of products HAWLE subsidiaries HAWLE partners Illustrations, technical data, dimensions and weights are subject to alteration without notice. Edition
is Central. Gas Water & Waste Water Energy Industrial Your One-Stop Source State-of-the art manufacturing
Experience is Central. Backed by more than 50 years of experience, Georg Fischer Central Plastics is the largest single source supplier for meter connections including products and technologies that prevent
CHAPTER 3 GENERAL REQUIREMENTS
CHAPTER 3 GENERAL REQUIREMENTS 301.0 General. 301.1 Scope Applicability. This chapter shall govern general and piping material requirements for swimming pools, spas, and hot tubs. 301.2 Swimming Pools
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following storm drainage piping inside the building.
SECTION 221413 - FACILITY STORM DRAINAGE PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following storm drainage piping inside the building. 1. Pipe, tube, and fittings. 2. Special pipe
NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
Iron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
Plastic Pressure Systems
Uniclass L71161:P71 CI/SfB TPL12-IND In6 February 2018 Plastic Pressure Systems Trade Price List Price List Polypipe, with its large UK based manufacturing capabilities, has developed Effast s comprehensive
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
AN INFORMED COMPLIANCE PUBLICATION JULY 2008
1 What Every Member of the Trade Community Should Know About: Classification and Marking of Pipe Fittings under Heading 7307 Edited for scope by M.E.Dey & Co Inc AN INFORMED COMPLIANCE PUBLICATION JULY
TDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
THOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
Terrain HDPE. Product Guide
TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other
Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
Design Standard HVAC Piping
Design Standard Revisions Log: Version Date Description of changes/updates 2 April 30, 2015 Expansion of direction pertaining to rooftop installations of copper piping Purpose: The heating, ventilating
Gas Station & C Store SECTION CWM Job No
SECTION 211010 - PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide labor, materials, equipment and services to perform operations required for the complete installation and related Work as required in Contract
This specification, applies at any Vale locations indicated with approval on the cover page, with the following exceptions:
1/5 1.0 PURPOSE This specification describes the minimum requirements for cold potable water plumbing systems within buildings. 2.0 APPLICATION This specification, applies at any Vale locations indicated
PART 2 SECTION 9 WATERLINES
PART 2 SECTION 9 WATERLINES 9-1 General - All pipe, pipeline installations and facilities related thereto, shall be as specified herein. All pipe installation shall be in accordance with the manufacturers
Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe
F 1 F 1.1 F 1.2 F 2 F 2.1 F 3 Service Saddles/ Hinged Type for 2 PVC Service Saddles/ Brass Alloy/ Stainless Steel Straps for Cast, Ductile & PVC Pipe Service Saddles/ Ductile Iron/ Stainless Steel Straps
PHOENIX TUBES & FITTINGS. Corrosion resistant. Exotic materials. International Quality. Effecient supply chain management. Fast track delivery
Effecient supply chain management Corrosion resistant International Quality Exotic materials Fast track delivery AN ISO 9001:2008 CO. Company Profile In the lifeline of industries, our fittings make sure
1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
September 6, 2016 Page 1 of 5
September 6, 2016 Page 1 of 5 1. SECTION 16100 Drawing E4.3, Note #39: Reference to the radio fire alarm panel and the fire station alerting master panel does not relate to the building fire alarm system.
Meter Connection Products: Overview
: Overview Georg Fischer Central Plastics entered the meter connection business in 1955 with the design and introduction of the insulated meter swivel and insulated union. We understand the critical nature
Trading LLC. QUALITY IS OUR BASIC STRATEGY FOR SURVIVAL AND FUTURE GROWTH
Trading LLC. QUALITY IS OUR BASIC STRATEGY FOR SURVIVAL AND FUTURE GROWTH ABOUT US In the Middle East as well as in any major economy, Oil and Gas, Power and Water are among the core sectors. In the Emirates,
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
Catalog of Pipes for Building Applications. Water Supply Hot Water Supply Drain & Vent
Catalog of Pipes for Building Applications Water Supply Hot Water Supply Drain & Vent Kubota ChemiX Products for Building Applications VP and VU Pipes For drain and vent applications Transparent DV Fittings
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 23 HVAC
SECTION 230500 - COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Piping materials and installation instructions common to most piping systems. 2. Dielectric
PLASTIC FITTINGS Avenue Edmonton, AB Canada T6E 5Z7. Toll Free: Phone: (780) Fax: (780)
9333 45 Avenue Edmonton, AB Toll Free: 1-800-272-9693 Phone: (780) 436-1930 Fax: (780) 435-4849 info@can-con.com TABLE OF CONTENTS PLASTIC FITTINGS POLYETHYLENE PIPE...- 1 - SERVICE RISERS... - 3 - TRANSITION
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE
AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as
Conduit and Accessories. The Ultimate in Corrosion Protection! Nominal Wall Thickness. Nominal Wall Thickness. in. (mm)
The Ultimate in Corrosion Protection! OCAL-BLUE TM Conduit Hot-dip galvanized steel or aluminum conduit Nominal 0.00 in. ( mils) blue urethane coating on interior Hot-dipped galvanized threads (steel)
PRODUCT GUIDE. C.A. Baldwin & Co Ltd. Quality is our strength
PRODUCT GUIDE C.A. Baldwin & Co Ltd Quality is our strength INDEX Expansion / Anti-vibration Couplings Pages 1 7 Repair Bandage Page 8 Fixing and Repair Clamps Pages 9 19 Compression Fittings for Steel
Water & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
ABOUT US. Our philosophy is to supply quality products at best possible price in a timely manner for utmost customer satisfaction.
India s Leading Manufacturer & Exporter of, and An ISO 9001 : 2008 Certified Company ABOUT US Ace Alloys LLP is one the most prominent manufacturer, supplier and exporter of,, Alloy Steel, Nickel Alloy,
STATE UNIVERPROGRAM DIRECTIVES
DIRECTIVE 15H-10 PIPING TYPES AND MATERIALS Issue date: September 2017 Steam & Condensate Piping Service & Location Pipe Size Pipe Material & Weight Joint Type Fitting Material Insulation Material Low
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
WELCOME TO TRUS GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY
WELCOME TO GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY 1. Index 1. Index 2. Introduction 3. Pipe Supply 4. Fitting Supply 5. Flange Supply 6. Hammer Wing Union Supply 7. Bolt / Nut Supply 8. Gasket
Drain Taps, Gland Cocks, De-Aerators and Air Vents
SETION 11a Drain Taps, Gland ocks, De-erators and ir Vents Tel: + ()195 71 Fax: + ()195 71 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents Drain Taps, Gland ocks, De-erators
Datasheet Rev.1 Feb 2016 Orifice plate multi-holes
Datasheet Rev.1 Feb 2016 rifice plate multi-holes Suitable if little space available Accuracy, repeatability and reliability of the flow element Non-standardized flow element but designed and manufactured
Polypipe Terrain. New Hythe Business Park. College Road. Aylesford. Kent ME20 7PJ. Tel: Fax:
Uniclass L71161:P71 CI/SfB TPL11-IND In6 February 2017 Plastic Pressure Systems Plastic Pressure Systems Plastic Pressure Systems TPL11-IND Trade Price List Polypipe Terrain New Hythe Business Park Trade
Cepex Corporate Presentation 2014
Cepex Corporate Presentation 2014 Index Who is Cepex Cepex as a part of Fluidra Distribution network Logistics History Actuation Fields Product Range R & D Cepex Quality Cepex Certification Worldwide Aplications
INDUSTRIAL VALVES PIPING PACKAGES VARIOUS EQUIPMENT
INDUSTRIAL VALVES PIPING PACKAGES VARIOUS EQUIPMENT UNIVERSAL S.R.L. HEAD OFFICE FACTORY: 29010 TREVOZZO DI NIBBIANO V.T.(PC) ITALY- VIA MOLINO FRANZINI 13 TEL.+39/0523997677 TELEFAX +39/0523997354 VAT:
G-FIRE GROOVED COUPLINGS
G-FIRE GROOVED COUPLINGS Figure 5 G-FIRE Rigid Page 5 Figure 5 Flexible Page GRINNELL are designed for grooved end pipe and are available in nominal sizes of 25mm (") to 3mm (2") including BS, and ISO
Arms Group Drainage System. 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve
Arms Group Drainage System 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve Swivel Joint Type Model No. 1010 Sizes 3in through 8in Heavy
SEWER FORCE MAIN HDPE PIPE
SECTION 15150 SEWER FORCE MAIN HDPE PIPE PART 1: GENERAL 1-1 DESCRIPTION: This specification governs the material, pipe, fittings, joining methods and general construction practice for High Density Polyethylene
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
SECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of work
CROMONIMET STEEL LIMITED
+91-8048076501 CROMONIMET STEEL LIMITED https://www.indiamart.com/cromonimetsteel/pdf1.html We are a well- known Manufacturer, Exporter, Supplier and Importer of Stainless Steel Round Bar / Pipes and Tubes,
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
º to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
Eos Common Steel Piping Database for Sage Timberline Office Estimating
for Sage Timberline Office Estimating Introduction The Common Steel Piping Database for Sage Timberline Office Estimating is designed to support piping estimating for buildings, process facilities, power
Reliability. Simple as that.
Reliability. Simple as that. Why choose Ward Fittings? The right fit for your gas distribution and fire protection needs. For 85 years, Ward malleable and cast fi ttings have formed, hardened and tumbled
EDMUND A. GRAY COMPANY, Inc. 1
EDMUND A. GRAY COMPANY, Inc. 2277 East Fifteenth Street PRODUCT LINE CARD Los Angeles, CA 9002-284 PLC-048 Phone: (2)625-272 Fax: (2)625-574 web: eagray.com email: sales@eagray.com All our pipe nipples
Technical Handbook On Rubber Expansion Joints And Flexible Pipe Connections
Technical Handbook On Rubber Expansion Joints And Flexible Pipe Connections Rubber union connector packless expansion joints. F 1123 and FSA's "Technical Handbook: Non-Metallic Expansion Joints and Flexible
AMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
Flashing and Sheet Metal Laboratory Equipment Plumbing Fixtures, Trim and Supports.
SECTION 15410 PIPING (PLUMBING) PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07600 - Flashing and Sheet Metal. 2. 11600 - Laboratory Equipment. 3. 15440 - Plumbing Fixtures, Trim and Supports. 1.02
A. Product Data: For Piping, fittings, transition fittings and dielectric fittings.
SECTION 22 11 16 - DOMESTIC WATER PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SECTION BASIC FIRE SUPPRESSION MATERIALS AND METHODS. A. Section includes pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - BASIC FIRE SUPPRESSION MATERIALS AND METHODS PART 1 GENERAL 1.1 SUMMARY A. Section includes pipe, fittings, valves, and connections for sprinkler systems. B. Related Sections: 1. Section
REVISIONS App PC. App Sud. App Thom 2011/10/26 GS 2012/10/01 BL 2011/10/26. Pending GS 2012/10/01 BL 2012/10/23. Pending MDF 2011/10/26 GS 2013/04/22
1/14 Rev 1 2 3 Description Document format and number changed. Previous number 3503-02.01.621 Approved for use in Thompson Piping system Approval Requirements for MB updated Specification Reference Correction
+91-8048762934 Ratna Exports http://www.ratnaexports.com/ We are engaged in the business of manufacturing, exporting and retailing Industrial Pipes, Forged Fittings and Flanges. Characterized by dimensional
APPENDIX C TECHNICAL SPECIFICATIONS HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS
PART 1 GENERAL 1.01 DESCRIPTION: C TECHNICAL SPECIFICATIONS HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS Scope This section specifies high density polyethylene pipe (HDPE) and fittings for water
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
Flanged chemical seals series D
Flanged chemical seals series D80-8-85 hemical seals with built-in flange Flange facing and diaphragm of the same material (D8, D85) Fluid temperature from -60 to +00 D80 DN 5 mm D80 DN > 5 mm Designed
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO. Alan Andreani, Ed. D. Mayor of Alliance
SPECIFICATIONS FOR PIPE FITTINGS VALVES FIRE HYDRANTS CITY OF ALLIANCE, OHIO 2016 Alan Andreani, Ed. D. Mayor of Alliance Mike Dreger, Director Public Safety & Service GENERAL TERMS AND CONDITIONS 1. Special
CITY OF WARRENVILLE STANDARD SPECIFICATIONS WATER MAIN, SANITARY SEWER AND STORM SEWER
CITY OF WARRENVILLE STANDARD SPECIFICATIONS WATER MAIN, SANITARY SEWER AND STORM SEWER WATER MAIN 1. All open cut water main shall be polyvinyl chloride plastic (PVC) pressure pipe per AWWA specification
Fittings. Elbow Pipe. Specifications:
Elbow Pipe This type of fitting is widely used in piping systems to connect two straight sections of pipes of equal or different nominal diameter and with a curvature at a certain angle to change its direction;
Consolidated* Electromatic* Ball Valves
GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown