Contents. The Range The Finishes Application...09
|
|
- Peter Higgins
- 6 years ago
- Views:
Transcription
1 MARINE HARDWARE
2 Contents The Range...03 The Finishes...08 Application...09
3 The Range HINGES The prime application of the hinge is for in cabin use; however, they can also be used for some alternative applications such as storage boxes. Hinges made from 316 grade stainless steel offer ultimate corrosion resistance, while Acetal hinges offer a light and long lasting alternative for high use and exposure at economical cost. MRN0150 CABIN HINGE SS 52x50x3.5MM CD2 Anti corrosion Low profile unobstructive design MRN0138 CABIN HINGE SS 38x38x3.5MM CD2 Anti corrosion Low profile unobstructive design MRN0086 CABIN HINGE SS 86x41x2MM CD2 Anti corrosion Low profile unobstructive design MRN0060 CABIN HINGE SS 56x41x2MM CD2 Anti corrosion MRN0040 CABIN HINGE SS 40x41x2MM CD2 Anti corrosion MRN0190 LIFT OFF HINGE 90X52X5MM RIGHT CD1 Anti corrosion Suitable for engine covers, e.g. boxes MRN0176 CABIN HINGE SS 76X38X3.5MM CD2 Anti corrosion Low profile unobstructive design MRN6480 CABIN HINGE WHITE 80X37MM CD2 UV stabilised Frosted finish Stainless steel 316 pin Suitable for interior or exterior use MRN6380 CABIN HINGE BLACK 80X37MM CD2 UV stabilised Frosted finish Stainless steel 316 pin Suitable for interior or exterior use MRN6260 CABIN HINGE WHITE 60X37MM CD2 UV stabilised Frosted finish Stainless steel 316 pin Suitable for interior or exterior use MRN6160 CABIN HINGE BLACK 60X37MM CD2 UV stabilised Frosted finish Stainless steel 316 pin Suitable for interior or exterior use MRN6040 CABIN HINGE WHITE 40X37MM CD2 UV stabilised Frosted finish Stainless steel 316 pin Suitable for interior or exterior use 03
4 DECK HARDWARE Deck hardware offers a concise range primarily focused on the fixing of boats and equipment to either another boat directly, or use on decks or jettys. The range includes cleat horns and cross bollards. MRN2152 CLEATHORN SLIMLINE SS 152MM CD1 Anti corrosion Slimline rounded design to reduce rope chaffing MRN2130 CLEATHORN SLIMLINE SS 203MM CD1 Anti corrosion Slimline rounded design to reduce rope chaffing MRN2150 CLEATHORN SOLID ALLOY 150MM CD1 Anti corrosion Slimline rounded design to reduce rope chaffing MRN5800 CROSS BOLLARD ALLOY LARGE Suitable to be welded onto aluminium boats Aluminium ALLOY GENERAL MARINE HARDWARE This range includes a variety of hardware used in specific marine application such as drain plugs, bungs, ski hook etc. MRN5100 SKI HOOK SS CD1 Anti corrosion Keeper retains ski rope when slack Stainless Steel 304 MRN5900 OUTBOARD MOTOR LOCK STEEL CD1 Secures outboard motors to transom Brass shackle Powder coat MRN7113 SKIN FITTING 13MM CD1 White acetal through hull fittings Suitable for most above waterline outlets MRN7119 SKIN FITTING 19MM CD1 White acetal through hull fittings Suitable for most above waterline outlets MRN7125 SKIN FITTING 25MM CD1 White acetal through hull fittings Suitable for most above waterline outlets MRN7206 RUBBER BUNG TAPERED SIZE 6 CD2 Tapered design Used in dingies and tinnies MRN7208 RUBBER BUNG TAPERED SIZE 8 CD2 Tapered design Used in dingies and tinnies MRN7216 DRAIN PLUG BLACK 16MM FINE CD2 Nylon construction for corrosion resistance MRN0116 DRAIN PLUG BLACK 16MM COARSE CD2 Nylon construction for corrosion resistance MRN7230 DRAIN PLUG BLACK 30MM CD1 Nylon construction for corrosion resistance MRN0130 DRAIN PLUG COMP BLACK 30MM CD1 Flat flanged base for low mounting in hull Corrosion resistant 04
5 CANOPY FITTINGS Covers and biminis offering protection to your boat when not in use. Canopy fittings are a range of hardware that offers suitable replacements for aged or broken fittings such as stayputs, stretch loops, and nylon buttons. MRN5000 LASHING EYE SS 8MM CD2 Anti corrosion MRN7400 STAYPUT VERITCAL DOUBLE WHITE CD4 UV stabilised Used for fastening canopies MRN7410 STAYPUT CANVAS DOUBLE WHITE CD4 UV stabilised Used for connecting fabric to fabric, such as vinyl bimini to clears MRN7420 STAYPUT CANVAS SINGLE WHITE CD4 UV stabilised Used for connecting fabric to fabric, such as vinyl bimini to clears MRN7500 BOW END WHITE 25MM CD2 Corrosion resistant MRN7510 BOW END BLACK 20MM CD2 Corrosion resistant 05 MRN7645 TUBE HOLDER WHITE 45MM CD2 Corrosion resistant Suitable for holding various of accessories such as boat hooks, paddles and oars MRN7638 TUBE HOLDER WHITE 38MM CD2 Corrosion resistant Suitable for holding various of accessories such as boat hooks, paddles and oars MRN7632 TUBE HOLDER WHITE 32MM CD2 Corrosion resistant Suitable for holding various of accessories such as boat hooks, paddles and oars MRN7625 TUBE HOLDER WHITE 25MM CD2 Corrosion resistant Suitable for holding various of accessories such as boat hooks, paddles and oars MRN7520 TUBE END CLAMP BLACK 20MMCD2 Corrosion resistant One end snaps around a tube and the other end inserts into a tube MRN7700 STRETCH LOOP BLACK 90MM CD2 Head fitting with shock cord loop Used for tensioning canopies & covers and securing ice box lids, etc MRN7710 STRETCH LOOP WHITE 90MM CD2 Head fitting with shock cord loop Used for tensioning canopies & covers and securing ice box lids, etc MRN7720 STRETCH LOOP BLACK 140MM CD2 Head fitting with shock cord loop Used for tensioning canopies & covers and securing ice box lids, etc MRN7708 SHOCK CORD BUTTON BLACK 8MM CD8 UV Stabilised For use with stretch loops and shock cords MRN7705 SHOCK CORD BUTTON WHITE 5MM CD8 UV Stabilised For use with stretch loops and shock cords MRN7800 DECK EYE WHITE CD2 UV Stabilised Corrosion resistant MRN7810 DECK HOOK WHITE CD2 UV Stabilised Corrosion resistant
6 LATCHES, CATCHES & LOCKS This range offers a selection of latches and catches that you can use to fasten or secure your valuables and equipments when out on the water. The application of the range is versatile and you can use the products to fasten cabin doors, storage boxes, cupboards or other applications in or around your home. MRN1000 ADJUSTABLE TOGGLE SS MM CD1 Anti corrosion Locking Eye for Padlock MRN1100 TOGGLE CATCH FLAT CHROME PLATED BRASS 97MM CD1 Solid brass for superior corrosion protection Chrome Plated MRN1200 HATCH FLAT CHROME PLATED BRASS 95MM CD1 Solid brass for superior corrosion protection Chrome Plated MRN3000 LIFT RING SS 44x38MM CD1 Anti corrosion Single finger lifting Spring loaded ring to prevent rattling MRN3100 FLOOR LIFT RING SS 76x58MM CD1 Anti corrosion Two finger lifting Suitable for floorboards, hatches etc MRN4000 BARREL BOLT SS 92MM CD1 Anti corrosion Rounded non catch style Including a rattle eliminating friction pad MRN4100 FINGER LATCH BRASS CD1 Solid brass for superior corrosion protection Used for cupboard doors etc Catch plate included MRN7300 CUPBOARD CATCH WHITE CD4 Snap catch with post mount Suitable for cupboards and small cabin doors MRN7310 CUPBOARD CATCH STRAIGHT CD4 Snap catch with post mount Suitable for cupboards and small cabin doors Solid Brass Solid Brass Solid Brass 06
7 ANCHORING & MOORING Anchoring and mooring offers products that can be used in conjunction with chain and silver rope to ensure an effective anchoring position. The range includes shackles, swivels and anchors. The sole offering of the sand and gravel anchor is a reflection of the more common water ways within which boating occurs in Australia. MRN5206 SHACKLE BOW GALV 6MM CD2 Galvanised for high corrosion resistance Screw collared pin with hole for security tie wire MRN5210 SHACKLE BOW GALV 10MM CD1 Galvanised for high corrosion resistance Screw collared pin with hole for security tie wire MRN5306 SHACKLE BOW SS 6MM CD2 Anti corrosion Screw collared pin with hole for security tie wire MRN5310 SHACKLE BOW SS 10MM CD1 Anti corrosion Screw collared pin with hole for security tie wire MRN5406 SWIVEL CHAIN GALV 6MM CD1 Galvanised for high corrosion resistance MRN5408 SWIVEL CHAIN GALV 8MM CD1 Galvanised for high corrosion resistance MRN5410 SWIVEL CHAIN GALV 10MM CD1 Galvanised for high corrosion resistance MRN5506 SWIVEL CHAIN SS 6MM CD1 Anti corrosion MRN5508 SWIVEL CHAIN SS 8MM CD1 Anti corrosion MRN5510 SWIVEL CHAIN SS 10MM CD1 Anti corrosion MRN0036 SAND ANCHOR GALV 3.6KG Galvanised for high corrosion resistance Suitable for use in sand or mud Retrival eye for ease of removal if snagged Stows flat 07
8 The Finishes Zenith 316 series Stainless Steel Hardware is a superior Austenitic, Marine Grade Stainless range of hardware. Products are recommended for use in areas where salt water or high exposure to water is anticipated. Products in this range offer outstanding resistance to corrosion due to their chromium (Cr) content together with additives which include Molybdenum (Mo) and Nickel (Ni). Stainless Steel is a soft metal. Pilot holes must be drilled prior to fastening Stainless Steel screws with a screwdriver or drill set to low speed. Zenith 304 series Stainless Steel Hardware is made of specified Austenitic Stainless steel and withstands ordinary corrosion. Products are recommended for use in areas where salt water or high exposure to water is anticipated. Products in this range offer outstanding resistance to corrosion due to their chromium (Cr) content together with additives which include Nickel (Ni). Stainless Steel is a soft metal. Pilot holes must be drilled prior to fastening Stainless Steel screws with a screwdriver or drill set to low speed. Aluminium Alloys are alloys in which aluminium (Al) is the predominant metal. This type of material is light weight while still maintaining strength. It also has good corrosion resistance due to a protective layer of aluminium oxide. It s an economical alternate to stainless steel in marine applications. Brass is an alloy of copper and zinc. It offers low friction and high resistance to corrosion. This makes brass an ideal material for hatches, catches and latches in the marine environment for a durable and smooth operation. Nylon is a type of synthetic polymer that offers many benefits such as light weight, high tensile strength, durability, and resistance to damage. It is suitable to many marine applications. Acetal resins, also known as Polyoxymethylene (POM) is an engineering thermoplastic. It offers high hardness and stiffness, excellent dimensional stability, good moisture, heat and solvent resistance and low friction. It is a popular material for precision parts for many marine applications. Galvanisation is a process of coating metal with a thin zinc layer, by passing the metal through a molten bath of zinc at a temperature of approximate C. Galvanised steel offers enhanced corrosion resistance as well as strength. 08
9 Application HINGES Storage bins Cupboards Fuse boxes Windscreens Glove box DECK HARDWARE tying water bags tying off to a jetty Attach to mooring buoys GENERAL MARINE HARDWARE Ski Hook, to be used for water sports Motor lock, to secure outboard motors Skin fittings, to allow for water bilging and ballast Bungs & drain plugs, to stop water entering the hull of the boat. LATCHES, CATCHES & LOCKS Cupboards Draws On deck compartments tool boxes CANOPY FITTINGS Bimini fixing points Bow ends Spare oars ANCHORING & MOORING 09 Join chain to anchor Attach trailer chain to vehicle Sand & Gravel anchor Join sails to eye loops
10
Established DOC. NO : SSI / PROFILE Rev-03
Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationPost Style with ABS Real Tuff
Post Style with ABS Real Tuff Mantova s patented Post Shelving with ABS Real Tuff removable shelves have been making life easier for thousands of Australian businesses for more then a decade. Removable
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informatione. Cutouts and Holes for Toilet Accessories: Made to template and edge-reinforced.
TOILET COMPARTMENTS GENERAL INFORMATION 1.1 Unless otherwise directed by CU Facilities toilet compartments shall be floor-supported, and urinal screens shall be wall hung, with anchoring devices and accessories
More informationModular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
More information.1 Underwriters' Laboratories of Canada (ULC)..1 CAN/ULC-S102-M88(R2000), Surface Burning Characteristics of Building Materials and Assemblies.
Place D Orléans Transitway Section 10 11 35 1231 Place D Orléans Dr, Ottawa, ON. SLIDING DISPLAY BACKDROPS City of Ottawa Project No. CR008042 Page 1 of 2 1 GENERAL 1.01 REFERENCES.1 Underwriters' Laboratories
More information! WARNING: Chain and Accessories shown are not to be used for overhead lifting or hoisting applications. Do NOT exceed working load limits.
PRODUCT CATALOG Catalog weights are approximate. Minimum Order Quantity: $200 www.perfectionchain.com 1 Over 165 Years of Manufacturing Excellence Perfection Chain Products (PCP) has been manufacturing
More informationHIGH MAST CAMERA POLE ASSEMBLY GENERAL
10-3.24 HIGH MAST CAMERA POLE ASSEMBLY GENERAL The Contractor must furnish and install the following equipment for high mast camera pole assembly as described herein and as shown on the plans: 1. Camera
More informationAttachment A-Flagpole(s) Specifications
Attachment A-Flagpole(s) Specifications PART 1-GENERAL 1.1 SCOPE A. The scope of work includes the removal of existing flagpole(s) and associated concrete bases, and installation of a new flagpole(s) and
More informationNEW BUILD m Deck Cargo Barge Listing ID: 3022
Australia - Chile - Indonesia - Great Britain - New Zealand - Panama - Philippines - South Korea - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) NEW BUILD - 82.3m Deck
More informationUTILUX CABLE MANAGEMENT
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/ documentaty style or portrait of engineer. UTILUX CABLE
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationPH6000. Key Features
Phenolic Locker Series PH6000 Key Features ½ inch doors and end panels Durable, backed by a 20 year warranty. Ideal choice for wet-use areas including pools and recreation centers Graffiti resistant, permanent
More informationSECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSECTION Summit Phenolic Lockers (Solid Phenolic Lockers)
SECTION 10 51 00 Summit Phenolic Lockers (Solid Phenolic Lockers) Part 1-General 1.01 Summary A. Section includes: solid phenolic lockers solid phenolic benches 1.02 Submittals A. Submittals: Comply with
More informationB. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.
SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationB. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
More informationPATENTS ARE PENDING. Building Dimensions. Exterior Dimensions Roof Edge to Roof Edge
Assembly Manual 8x9 PATENTS ARE PENDING Approximate Size 7640303 Storage Area Building Dimensions Exterior Dimensions Roof Edge to Roof Edge Interior Dimensions Wall to Wall Sq. Ft. Cu. Ft. Width Depth
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION [ ] COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 [08 33 13] COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Metal Counter
More informationRoof Accessories. Division Roof Hatches Roof Safety Rails Safety Posts. Division Smoke Vents
Roof Accessories Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 www.bestmaterials.com Email: Sales@BestMaterials.com Division 07 72 33 Roof Hatches Roof Safety Rails Safety Posts Division
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More informationSERVICES. About Us. EDS Company Ethos. Services. Categories
About Us EDS don t just make stuff. We use our engineering and product development experience to design and develop innovative, practical and cost effective solutions. We work closely with our customers
More informationSECTION PERSONNEL DUTY LOCKERS. 1. FPPL Series Police Personnel Duty Lockers, including the following:
SECTION 10501 PERSONNEL DUTY LOCKERS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 specifications
More informationSECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM
Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING
More informationwhere high efficiency is the standard
Access Doors 2016 where high efficiency is the standard Experience Milcor offers years of experience in the manufacture of a broad range of products and services for residential, commercial, institutional
More informationBulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
More informationREGENCY NSF BLACK EPOXY WIRE SHELVING
REGENCY NSF BLACK EPOXY WIRE SHELVING Regency Space Solutions is your source for quality, affordable wire shelving. Offering a large selection of NSF Listed wire shelves and posts, Regency Space Solutions
More informationSECTION VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this Section. 1.2 SUMMARY A. This Section includes the
More informationCable Ties. Body Width (in./mm) Length (in./mm)
Cable Ties TY523M Tie body width 0.091 in. TY525M Tie body width 0.184 in. TY524 Tie body width 0.140 in. TY5272M Actual size body width 0.270 in. Type DSG Plenum Rating ANSI UL94 Flame Rating Military
More informationA. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
More informationWALL MOUNTED ARTICULATING JIB CRANE
SECTION 14656 WALL MOUNTED ARTICULATING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and
More informationDRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).
SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit
More informationFLOOR AND AREA DRAINS
Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA
More informationArchitectural Specifications, Section Phenolic Lockers
Architectural Specifications, Section 10500 Phenolic Lockers Hollman, Inc., 1825 W. Walnut Hill Lane, Irving, TX 75038, (972) 815-4000, www.hollman.com 1.0 GENERAL 1.1 SECTION INCLUDES A. Phenolic Lockers.
More informationShackles. Applications. Range. Design. CAD drawings. Finish
Applications Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications.
More informationPACIFIC BRAKE WINCHES
PACIFIC BRAKE WINCHES The Pacific Brake Winches are compact, lightweight and a cost-effective solution for a variety of applications. They can be used for both pulling and lifting purposes and comply to
More informationGUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
More informationMining & Heavy Industry Tools
Mining & Heavy Industry Tools The Mumme Products range of forged hand tools are produced to the highest possible standards for use in the mining and heavy construction industries. With top quality materials
More informationMERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing
MERCHANTS METALS SECTION 32 31 13 COLORBOND CHAIN LINK FENCE AND GATES 2014 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements,
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationSECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
More informationIndustrial Shelving. Q Line, Z-Line/Steel Shelves, Bulk Storage and Heavy-Duty Reinforced Shelving SYSTEMS FOR SUCCESS
Industrial Shelving Q Line, Z-Line/Steel Shelves, Bulk Storage and Heavy-Duty Reinforced Shelving Q Line & Z-Line/Steel Shelving Heavy Duty Reinforced Shelving & Bulk Storage Shelving 2 Industrial Shelving
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More informationInsulated Fire-Rated Access Door Model(s): BIT/BIW/BIP
Insulated Fire-Rated Access Door INSTALLATION, OPERATION & MAINTENANCE MANUAL Table of Contents Insulated Fire-Rated Access Door Table of Contents General Description...3 Installation...4-7 Operation...8
More informationINDUSTRIAL GUARDRAIL SYSTEMS
INDUSTRIAL GUARDRAIL SYSTEMS STRONGEST GUARDRAIL ON THE MARKET MANUFACTURED IN THE U.S.A. BEST PRICES MOST VARIETIES HEAVY DUTY ONE-LINE OR TWO-LINE Posts: 4 Sched 80 pipe Rail: 6 Sched 40 pipe Sleeved
More informationProjector mounts. CMA115 6 (152 mm) CEILING PLATES. concrete. vaulted. CMA330 8 (203 mm) CMA700 6 (152 mm)
CEILING PLATES CMA105 4 (102 mm) Flat Ceiling Plate General purpose ceiling plate with small mounting footprint Use with short columns or when mounting space is limited concrete CMA330 & CMA345 CMA100
More informationWWW.SAMSUNGPJS.CO.KR SAMSUNG Pipe Joint System, is a manufacturing company, specialized in metal stamping, form rolling and pipe extrusion. With more than 20 years of manufactring experience, we are able
More informationB. Provide fire-rated access doors where indicated or scheduled.
SECTION 08305 ACCESS DOORS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationSTORM UTILITY WATER DRAINS
1. Product Name ACO Drainª K100S General-Purpose Trench Drain ACO Drainª S100K Heavy Duty Trench Drain ACO Drainª S300K Heavy Duty Trench Drain ACO Drainª FG100 High Capacity Trench Drain ACO Drainª FG200
More informationThis guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
SECTION 14651 FREE STANDING JIB CRANE ***** Gorbel, Inc. manufacturers a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station and industrial
More informationOriginal Scandinavian rainwater system
Original Scandinavian rainwater system Siba Siba Square Contents Siba rainwater systems 3 Measuring 15-16 Siba 4-9 Gutter brackets 18-19 Siba Square 10-11 Gutters 20-23 Materials 12 Angles 24 Technical
More informationSECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSOLAR SHADING SYSTEMS - Manual Solar Shade SECTION ROLLER WINDOW SHADES
PART 1 - GENERAL SECTION 122413 - ROLLER WINDOW SHADES 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationQuentor Ltd. Q-Shacks CASES. Clearly a case of excellence
Quentor Ltd Q-Shacks CASES Clearly a case of excellence Introduction Q-Shacks were developed by Quentor as lightweight freight solutions for world-wide air travel. The Q-Shack is a lightweight module that
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationBID # ELLIS MIDDLE LOCKERS
BID # 20140729 ELLIS MIDDLE LOCKERS The Sumner County Board of Education, herein known as School System, is soliciting bids for the purchase and installation of new lockers. The vendor must include cost
More informationVAN RACKING SYSTEMS.
VAN RACKING SYSTEMS www.baggioedesordi.com VAN RACKING SYSTEMS We organize the space of each van and improving its capacity. Our objective? Making the interior equipment rational and safe. Upright > Material:
More informationROLLING RACK. Simple Security
Simple Security The graceful design and high security of the Rolling Rack has made this type of bike rack a standard for many schools and communities. The Rolling Rack can be used as a single-sided or
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationRivet nut fully installed
Environment Rules Joint Design, by Adam Pratt Over seven decades ago rivet nuts were invented for airplane wing attachment points. Since then, the need for reliable threads in thin materials has dramatically
More informationLOW HEAT INPUT WELDING ALLOYS
ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,
More informationKaba Padlock Range BEYOND SECURITY
Kaba Padlock Range BEYOND SECURITY Kaba Padlock systems: > pextra Kaba Padlock Range Kaba offers a range of padlocks to suit a wide variety of applications, providing high levels of physical security combined
More informationOperating Instructions
Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper
More informationFASTENERS FOR WINDOW FABRICATION
1.0 INTRODUCTION FASTENERS FOR WINDOW FABRICATION A SPECIFIER'S GUIDE TO FASTENERS A window's performance is only as good as its weakest link. Fasteners represent the smallest unit percentage in total
More informationKelley HULK Dock Lifts and Ergonomic Lift Tables
Kelley HULK Dock Lifts and Ergonomic Lift Tables Kelley HULK Lift Products help increase productivity and employee safety with innovative, cost effective solutions to the unique challenges associated with
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More informationFielders Steel Door Frames. Architectural and Commercial
Fielders Steel Door Frames The Fielders Steel Door Frame is a strong and durable solution, made from 100% Australian steel by BlueScope. We offer an extensive range of standard sizes and a complete custom
More informationWANZL NORTH AMERICA CATALOG. Logistics + Industry. We keep your Logistics rolling!
WANZL NORTH AMERICA CATALOG Logistics + Industry We keep your Logistics rolling! 2 LOGISTICS + INDUSTRY CONTENTS Contents MISSION STATEMENT 4 QUALITY_MADE BY WANZL 6 HIGHLIGHTS_MADE BY WANZL 7 01 ORDER
More informationWeep Valves Stucco Wire Mesh Reinforcement Weather Resistive Barrier Sheathing Insulation Framing
INSTALLATION INSTRUCTION FOR SINGLE-HUNG AND FIXED WINDOW REPLACEMENT using FLUSH FLANGE Installation Instructions for replacing windows in a Typical Stucco Application. These instructions were developed
More informationLifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
More informationThis guide can be used to prepare a specification for incorporating free standing jib cranes into a competitively bid construction project.
GORBEL PRODUCT SPECIFICATIONS 2010 Gorbel, Inc., P.O., Box 593, Fisher, New York 14453-0593 PHONE: 800-821-0086, FAX: 585-924-6273; WEBSITE: www.gorbel.com November SECTION 41 22 31PRIVATE FREE STANDING
More informationSpecification Drainage Engineering Guide. Hydrants.
Specification Drainage Engineering Guide Hydrants www.zurn.com APPLICATION INDEX WALL HYDRANTS NON-FREEZE/SELF-DRAINING MODERATE CLIMATE Retail Outlets Z1300, Z1305, Z1310, Z1320 Z1330, Z1335 Office Buildings
More informationRoof Hatches Smoke Vents. Complementary B u i l d i n g Products
Roof Hatches Smoke Vents Complementary B u i l d i n g Products Roof Hatches Nystrom Roof Hatches and Scuttles are manufactured to solve all of your roof access needs. Custom sizing, materials, and color
More informationELLISON BRONZE SECTION EXTRUDED ALUMINUM BALANCED DOOR ENTRANCES
ELLISON BRONZE SECTION 08 42 36 Section C EXTRUDED ALUMINUM BALANCED DOOR ENTRANCES Display hidden notes to specifier by using Tools / Options / View / Hidden Text PART 1 GENERAL 1.01 DESCRIPTION A. Work
More informationLittlies. Willplay s Littlies range offers floor. Cool activities for little kids!
Littlies Cool activities for little kids! Willplay s Littlies range offers floor based activities that promote safe play while challenging the little ones imaginations. From cubby houses to interactive
More informationKnot Wheel Brushes WHEEL BRUSHES
W HE E L B RU S H E S 4 5 Knot Wheel Brushes Knot Wheel Brushes Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds.
More informationLINATEX Screen Media. Excellent Minerals Solutions
LINATEX Screen Media Excellent Minerals Solutions Linatex screen media Built to deliver outstanding wear performance in the most demanding applications, Linatex screen media have rightly won a reputation
More informationKUBIC GLASS SHELF SUPPORTS
KUBIC GLASS SHELF SYMBOLS AND FINISHES LEGEND SYMBOLS = SHELF SAFELY LOCKED DURING TRANSPORTATION AND AT HOME. LOCK = ANTI-TURNOVER LOCKING SYSTEM = NORMS / PATENTS = PHILLIPS / POZIDRIV N = NEWTON = PART.NO
More informationeccles The new COVER-ALL recessed range Keeping above from below
eccles The new COVER-ALL recessed range Keeping above from below Manufactured to European Standards All models in the new advanced composite range are manufactured to BS EN 124 : 1994, an exacting industry
More informationLight Duty Ramps. Loadingdocksupply.com PHONE:
Light Duty Ramps Light Duty Aluminum Dockplates Designed for use by pallet trucks, carts, and foot traffic the A & B model Aluminum Dockplate is lightweight and portable. Accomodates differentials up to
More informationSECTION MASONRY ACCESSORIES
PART 1 GENERAL 1.01 SCOPE OF WORK A. Contractor shall furnish all labor, materials, equipment and incidentals required to provide masonry accessories as shown on the Contract Drawings and specified herein.
More informationWHAT TO DO? ELECTROPLATING OR METAL SPRAYING?
WHAT TO DO? ELECTROPLATING OR METAL SPRAYING? S. de Vries, J.W. Rauhorst, B. Plasse & F. Kemeling The first step to improve and control the quality of a metal product starts at the desk of the designer.
More informationBerliss Companies 644 Route 10 P.O. Box 45 Livingston, NJ Phone: (973) Fax: (973)
Berliss Companies 644 Route 10 P.O. Box 45 Livingston, NJ 07039 Phone: (973) 992-4242 Fax: (973) 992-6669 www.berliss.com Capabilities Catalog 2008-2009 Thinking Custom? Think Berliss. Berliss is an industry
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More information200 Series In-Slab Pool Fittings
230 Series nti-vortex Plate 2-2 231 Series Sump 2-3 234 Series Sump 2-4 236 Series Sump 2-5 253 Series Overflow 2-6 255 Series Overflow/Drain 2-7 261 Series Vacuum Fitting 2-8 263 Series Eyeball Fitting
More informationPlanning and installation instructions
Planning and installation instructions Stofix Oy Ahlmaninkatu 2 E 40100 Jyväskylä Finland stofixgroup@stofix.com www.stofix.com 2 PLANNING AND INSTALLATION INSTRUCTIONS... 1 1 General... 3 2 Project Design...
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationB R OA DWAY RAC K. High Security
B R OA DWAY RAC K High Security The Broadway Rack is a great fit on Broadway or in areas where maximum security is a top priority. Made of thick, two-inch square steel, the Broadway Rack renders pipe-cutters
More informationTri Custom Manufacturing
Catalog 108 Tri Custom Manufacturing Balusters / Spindles Porch & Newel Posts Caps / Post Skirts Railing Brackets Post Mount Towers Gate Hardware Faux Rock Pillars Post Wraps Quality Products for the Fence,
More informationSection BUILDINGS, SHELTERS, ENCLOSURES
Section 13121 BUILDINGS, SHELTERS, ENCLOSURES Part 1 GENERAL 1.1 SECTION INCLUDES 1.2 A. Pre-engineered buildings. B. Pre-engineered shelters. C. Pre-engineered enclosures. D. Electrical wiring and devices
More informationBox Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
More informationSection SECTIONAL INSULATED STEEL DOORS
1 GENERAL 1.1 GENERAL REQUIREMENTS General Conditions and Division 01 apply to this section. 1.2 RELATED WORK Section 05500: Miscellaneous Metal Fabrication Section 07900: Joint Sealers Section 09900:
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationStainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
More information