NEW BUILD m Deck Cargo Barge Listing ID: 3022
|
|
- Jared Glenn
- 6 years ago
- Views:
Transcription
1 Australia - Chile - Indonesia - Great Britain - New Zealand - Panama - Philippines - South Korea - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) NEW BUILD m Deck Cargo Barge Listing ID: 3022 DESCRIPTION: 82.3m Deck Cargo Barge DATE LAUNCHED: Built to Order LENGTH: 82.30m (270ft) BEAM: 21.40m (70ft) LOCATION: ex Shipyard, China BROKER: Geoff Fraser PRICE: 850,000 USD General Description 1. GENERAL DESCRIPTION The vessel is an unmanned dump barge suitably equipped for carrying deck cargo for unrestricted services. The barge is all welded steel construction. It has flush deck and twin skegs. The main hull is divided by eight (8) transverse W.T. bulkheads and two (2) longitudinal W.T. bulkheads into twenty-seven (27) compartments. 2. PRINCIPAL PARTICULARS Length: M (270 0 ) Beam: M (70 0 ) Depth: 4.90 M (16 0 ) Frame spacing: 1830 MM Draft moulded: 3.80 M (approx.) Deadweight: 5500T (approx.) Deck loading: 7 Tonnes/M2 3. CLASSIFICATION The vessel is designed suitable for registration as a cargo barge and constructed in accordance with the latest rules and regulations of ABS for unrestricted services and to their special Survey to hull for Class for Unmanned Deck Barge. Notation: ABS +A1 Deck Barge. 4. CERTIFICATES The following certificates will be supplied to the Owner at the time of delivery of the vessel: (a) Builder s Certificate (b) Temporary International (1969) Tonnage Certificate issued by ABS (c) Interim Class Certificate issued by ABS (d) Provisional Load Line Certificate by ABS (e) Cargo Ship Safety Construction Certificate issued by ABS (f) Anti fouling certificate by ABS 5. MATERIALS & WORKMANSHIP All materials and workmanship will be of the highest quality, with all steel plates, sections,hull forging and castings met with ABS Classification requirements and approval. 6. WELDING The vessel will be welded constructed. Welding is to be carried out in accordance with the Classification s requirements and to the attending Surveyor s Satisfaction. 7. TEST Prior to the delivery, the hull and other fittings etc. to be thoroughly tested to the satisfaction of the Classification s attending Surveyor. 8. STABILITY BOOKLET The stability booklet is to be prepared and supplied by the builder based on the estimated lightship weight or the results from lightship Survey if and when required by the Classification. 9. SCANTLINGS: Plating Deck: 12.0mm Bottom: 12.0mm Sides: 12.0mm Page 1 of 5
2 Longitudinal Bulkhead: 8.0mm Transverse Bulkhead: 8.0mm Longitudinal Deck Longitudinal: 125x80x7mm O.A./125x80x7mm O.A. (Deck beam) Bottom Longitudinal: 125x80x8mm O.A./ 140x90x8mm O.A. (Bottom beam) Side Longitudinal: 125x80x7 mm O.A./ 125x80x8 mm O.A.(FR.36~Fore) Longitudinal Bhd. STIFF. 100x80x6 mm O.A./100x63x6 mm O.A.(FR.36~Fore) Transv.Bhd.STIFF. 100x80x6mm O.A. /100x63x6 mm O.A Transv.Bhd.Stringers 250x8+75 flanged plate Transverse/ Webs (Approx. subject to changes) Deck transverse: 450x10+100mm flanged plate 350x8+75mm flanged plate Bottom Transverse: 400x10+100mm flanged plate 350x8+75mm flanged plate Side Transverse 400x8+75mm flanged plate 450x8+75mm flanged plate Deck.Girder 450x8+100mm flanged plate (Fr.0~36) 350x8+75mm flanged plate(fr.36~fore) Bottom Girder: 400x8+100mm flanged plate (Fr.0~36) 350x8+75mm flanged plate (Fr.36~fore) Long. Bhd. WEB.: 400x8+75mm flanged plate Transv.Bhd.WEB. 450x10+100mm flanged plate(fr.0~36) 400x8+75mm flanged plate(fr.36~fore) Stanchions Vertical: 250x FLG. (Fr.0~36) Vertical: 150X150X12mm O.A. (Fr.36~ fore) Diagonals: 140x140x10mm O.A. Bilges chine?50 R.B. 10. DECK FITTINGS (a) Sideboard L73.2m x B19.00m x H2.4m Plate 8mm Longitudinal L100x75x7 Vertical web 10mm flanged (b) One (1) 1290kg stockless bower anchor with 36m x 28mm diameter wire rope. (c) One (1) diesel operated winch of 10ton pull to be provided. (d) Flush type watertight manholes of 630x430 on main deck are to be provided for middle compartment and raise type watertight manholes of 600x400 are to be provided for side compartment. Studs, washer and nuts are to be stainless steel. (e) twenty-seven (27) vertical steel ladders for access to under deck voids. (f) Four (4) towing brackets to be fitted on bow and stern of main deck, two for main towing and two for emergency tow. (g) Four (4) sets of chaffing chain, two for main towing and two for emergency tow. (h) Four (4) 55t shackle (i) Ten (10) mooring bollards of 12'' NB sch 80 pipe are to be fitted on main deck. (j) Small lags for lashing of portable type fenders to be fitted on deck. 11. NAME AND DRAFT MARKS The name of the barge is to be welded and painted on the bow port and starboard, the name and port of registry of the barge are to be welded on and painted on the stern. All letters are to be not less than 300mm in height. Port of registry is to be not less than 12. PAINTING All steel plates/steel material is to be grit blasted to SA2.5 on both sides of the steel plates and all round on all other steel materials and cleaned to as high a standard as possible in order to remove all the dust and mill scale prior to painting with one (1) coat of marine primer. All steel surfaces are to be free from grease and free from moisture before priming coats are applied. All coats are to be thoroughly dry before further coats are applied on top. 13. CATHODIC PROTECTION Sixty (60) zinc anodes are to be fitted to protect the external hull below the waterline against corrosion. 14. Drawings On completion, three (3) sets of the following hard prints as approved by the Classification are to be supplied: - - Lines plan - General Arrangement - Structure construction Drawings - Welding Schedule - Skeg Detail - Sideboard detail Page 2 of 5
3 - Bulwark detail - Stability Booklet IMPORTANT: The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice. NEW BUILD m Deck Cargo Barge Images Page 3 of 5
4 Page 4 of 5
5 Page 5 of 5
FMB15678 Steel Deck Cargo Barge
FMB15678 Steel Deck Cargo Barge 2 Barges, originally built in 2012 to the specification below are now available for purchase. Section 1 General 1.1 Intent & Definition This specification together with
More informationNEW BUILD - 365ft Deck Barge Listing ID: 1822
Australia - Chile - Indonesia - Great Britain - New Zealand - Panama - Philippines - South Korea - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) NEW BUILD - 365ft Deck
More informationPortable 80 PAX Modular Ferry
Australia - Chile - Indonesia - Great Britain - New Zealand - Panama - Philippines - South Korea - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) NEW BUILD - Portable 80
More informationRules for the Classification of. Dredgers
017 Rules for the Classification of Dredgers KR 017 Rules for the Classification of Dredgers RB-04-E KR APPLICATION OF "RULES FOR THE CLASSIFICATION OF DREDGERS" 1. Unless expressly specified otherwise,
More informationRules for the Classification of. Steel Barges
2017 Rules for the Classification of Steel Barges KR 2017 Rules for the Classification of Steel Barges Rules 2017 Guidance Relating to the Rules for the Classification of Steel Barges Guidance 2017 Rules
More informationSTEEL BARGES 1991 RULES FOR BUILDING AND CLASSING. NOTICE NO. 8 September The following Rule Changes are EFFECTIVE AS OF 1 JANUARY 2003.
RULES FOR BUILDING AND CLASSING STEEL BARGES 1991 NOTICE NO. 8 September 2002 The following Rule Changes are EFFECTIVE AS OF 1 JANUARY 2003. SECTION 7 PART B MAIN FRAMING TANK BARGES 7B.3 Double Skin Tank
More information1.15 Chemical Tanker Longitudinal corrugated bulkhead (vertical type).
Table A.1 corrugated bulkhead s Case Ship Type Damage Location 1.1 Chemical Tanker Longitudinal corrugated bulkheads (horizontal type) in way of mid cargo area. 1.2 Product Tanker Transverse corrugated
More informationShipRight Notice for. Linked Supporting Services Anti-Corrosion System Notation, July Issue date: September 2014
ShipRight Notice for Linked Supporting Services Anti-Corrosion System Notation, July 2012 The status of this Rule set is amended as shown and is now to be read in conjunction with this and prior Notices.
More informationPART 4 STEEL CONSTRUCTION
PART 4 STEEL CONSTRUCTION SECTION SUBJECT 4.1 Materials 4.2 Steel hull construction 4.3 Keel, centre and side girders 4.4 Bottom construction floors and longitudinals 4.5 Integral tanks 4.6 Stem 4.7 Bulbous
More informationSTEEL BARGES 2016 RULES FOR BUILDING AND CLASSING. American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862
Rules for Building and Classing Steel Barges RULES FOR BUILDING AND CLASSING STEEL BARGES 2016 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2015
More informationTechnical Information
Subject Format Revision of Condition Evaluation Report (CER) To whom it may concern Technical Information No. TEC-1092 Date 17 November 2016 When Special is carried out for ships applying Enhanced Program(ESP),
More informationOre Carriers Part 4, Chapter 11
Section 1 Section 1 General 2 Materials and protection 3 Longitudinal strength 1.2 Structural configuration and ship arrangement 1.2.1 The requirements contained in the Chapter apply to single deck ships
More informationHull Surveys for General Dry Cargo Ships
(June 2002) Hull Surveys for General Dry Cargo Ships CONTENTS 1. General 1.1 Application 1.2 Definitions 1.3 Repairs 2. Special Survey 2.1 Schedule 2.2 Scope 2.2.1 General 2.2.2 Dry Dock Survey 2.2.3 Tank
More informationPart 3 Hull Chapter 11 Hull equipment, supporting structure and appendages
RULES FOR CLASSIFICATION Ships Edition January 017 Part 3 Hull Chapter 11 Hull equipment, supporting structure and appendages The content of this service document is the subject of intellectual property
More informationCorrigenda 1. Rule Editorials
COMMON STRUCTURAL RULES FOR BULK CARRIERS JULY 2012 Corrigenda 1 Rule Editorials Notes: (1) These Rule Corrigenda enter into force on 1st July 2012. (2) These Rule Corrigenda should be read in conjunction
More informationContents. The Range The Finishes Application...09
MARINE HARDWARE Contents The Range...03 The Finishes...08 Application...09 The Range HINGES The prime application of the hinge is for in cabin use; however, they can also be used for some alternative applications
More informationINSPECTION GRADING CRITERIA FOR THE ABS HULL INSPECTION AND MAINTENANCE PROGRAM (HIMP)
INSPECTION GRADING CRITERIA FOR THE ABS HULL INSPECTION AND MAINTENANCE PROGRAM (HIMP) OUR MISSION The mission of ABS is to serve the public interest as well as the needs of our members and clients by
More informationNational Maritime Center
National Maritime Center Providing Credentials to Mariners (Sample Examination) Page 1 of 12 Choose the best answer to the following Multiple Choice Questions. 1. To have the ultimate authority for a mobile
More informationLecture 3-1: Hull production - Product hierarchy and block division
Kul-24.4130 Shipyard engineering Lecture 3-1: Hull production - Product hierarchy and block division Applied Mechanics Marine Technology Lecture in course contents Production planning Introduction Shipbuilding
More informationPART 4 STEEL AND ALUMINIUM CONSTRUCTION
PART 4 STEEL AND ALUMINIUM CONSTRUCTION PART 4 STEEL AND ALUMINIUM CONSTRUCTION SECTION SUBJECT 4.1 Materials 4.2 Steel and aluminium hull construction 4.3 Keel, centre and side girders 4.4 Bottom construction
More informationRULES FOR CLASSIFICATION Inland navigation vessels. Part 5 Ship types Chapter 1 Cargo vessels. Edition December 2015 DNV GL AS
RULES FOR CLASSIFICATION Inland navigation vessels Edition December 2015 Part 5 Ship types Chapter 1 The content of this service document is the subject of intellectual property rights reserved by ("DNV
More informationPart 10 Hull Structure and Equipment of Small Steel Ships
2015 Rules for the Classification of Steel Ships Part 10 Hull Structure and Equipment of Small Steel Ships 2015 Guidance Relating to the Rules for the Classification of Steel ships Part 10 Hull Structure
More informationMSC Guidelines for Review of Structural Plans for Wooden Vessels
K. B. Ferrie, CDR, Chief, Hull Division References: a. Lloyd s Register Rules and Regulations for the Classification of Yachts and Small Craft (Amended to 1983) b. 1943 ABS Rules for Building and Classing
More informationShip Structure Committee Case Study
Member Agencies: American Bureau of Shipping Defence Research and Development Canada Maritime Administration Military Sealift Command Naval Sea Systems Command Society of Naval Architects & Marine Engineers
More informationHULL - INTERNAL MEMBERS & SUBDIVISIONS
VOLUME II Copyright 2013 Overseas Marine Certification Services OMCS CLASS INDEX VOLUME II: PART A: HULL CHAPTER 1: TERMS 1.1. LENGTH 1 1.2. BREADTH 1 1.3. DEPTH 1 1.4. DRAUGHT 1 1.5. FREEBOARD DECK. 1
More informationREBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH
Guide for Rebuilding Vessels Less Than 90 Meters (295 Feet) in Length and Barges of Any Length GUIDE FOR REBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH NOVEMBER 2014
More informationCOMMON STRUCTURAL RULES FOR BULK CARRIERS AND OIL TANKERS RULE CHANGE PROPOSAL 1 This proposal contains amendments within the following Parts and chap
Common Structural Rules for Bulk Carriers and Oil Tankers Draft Rule Change Proposal 1 to 01 JAN 2018 version Notes: (1) These Rule Changes enter into force on 1 st July 2019. Copyright in these Common
More informationName of ship. MNZ number. Nationality. Owners. Surveyor. Classification Society. Date of build/conversion. Freeboard length.
Form of the record of particulars relating to the conditions of assignment (MSF037) INTERNATIONAL CONVENTION ON LOAD LINES, 1966 RECORD OF CONDITIONS OF ASSIGNMENT Name of ship MNZ number Nationality Owners
More informationPart 7 Ships of Special Service
2017 Rules for the Classification of Steel Ships Part 7 Ships of Special Service 2017 Guidance Relating to the Rules for the Classification of Steel ships Part 7 Ships of Special Service Rules Guidance
More informationTECHNICAL SPECIFICATION DANTECO HERMANNS. CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device
TECHNICAL SPECIFICATION DANTECO HERMANNS CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device 6058(20') x 2438(8') x 2591(8'6") MODEL NO. : CX09-20SNX1 SPEC. NO : CX09-20SNX1-S3
More informationNot Repeating the Past - A Case Study of Fatigue Fracture in Midship Cargo Tanks
Not Repeating the Past - A Case Study of Fatigue Fracture in Midship Cargo Tanks Ryan Salamati ABS, Hamburg Germany Dr. Michael B. Kennedy Hellespont Ship Management GmbH & Co. KG, Hamburg Germany Abstract
More informationSEMI-SUBMERSIBLE HEAVY LIFT VESSELS
Guide for Building and Classing Semi- submersible Heavy Lift Vessels GUIDE FOR BUILDING AND CLASSING SEMI-SUBMERSIBLE HEAVY LIFT VESSELS APRIL 2017 American Bureau of Shipping Incorporated by Act of Legislature
More informationISO Ships and marine technology Protective coatings and inspection method Part 3: Cargo oil tanks of crude oil tankers
INTERNATIONAL STANDARD ISO 16145-3 First edition 2012-10-01 Ships and marine technology Protective coatings and inspection method Part 3: Cargo oil tanks of crude oil tankers Navires et technologie maritime
More informationHull Survey for New Construction
(July 2006) (Rev.1 Mar 2007) (Corr.1 Oct 2007) (Rev.2 Apr 2009) (Corr.1 August 2012) Hull Survey for New Construction 1. Scope The scope of this UR includes the following main activities: 1.1 Examination
More informationSEMI-SUBMERSIBLE HEAVY LIFT VESSELS
Guide for Building and Classing Semi- submersible Heavy Lift Vessels GUIDE FOR BUILDING AND CLASSING SEMI-SUBMERSIBLE HEAVY LIFT VESSELS APRIL 2017 (Updated May 2017 see next page) American Bureau of Shipping
More informationOTC Abstract. Introduction
OTC 15315 An Innovative "No Hot Work" Approach to Hull Repair on In-Service FPSOs Using Sandwich Plate System Overlay Stephen J. Kennedy, James Bond, and Dale Braun, Intelligent Engineering Limited; Peter
More informationHull Surveys for Liquefied Gas Carriers
(May 2007) (Rev.1 Nov 2007) (Rev.2 Mar 2009) (Rev.3 July 2011) Hull Surveys for Liquefied Gas Carriers CONTENTS 1. General 1.1 Application 1.2 Definitions 1.3 Repairs 1.4 Thickness measurements and close-up
More informationSurvey performance requirements. Periodic surveys of hull, decks and superstructure of fibre-reinforced plastic (FRP) ships
Survey performance requirements Periodic surveys of hull, decks and superstructure of fibre-reinforced plastic (FRP) ships Pursuant to Maritime Rule 44.25(3), and having met the relevant obligations of
More informationTHE COMMON STRUCTURAL RULES INITIAL DESIGNS AND FUTURE DEVELOPMENTS
THE COMMON STRUCTURAL RULES INITIAL DESIGNS AND FUTURE DEVELOPMENTS Gary Horn, ABS, USA Dan Cronin, ABS, Singapore Abstract This paper will discuss the design of oil tankers built to the IACS Common Structural
More informationGUIDELINES FOR THE INFORMATION TO BE INCLUDED IN A SHIP CONSTRUCTION FILE
E 4 ALBERT EMBANKMENT LONDON SE1 7SR Telephone: +44 (0)20 7735 7611 Fax: +44 (0)20 7587 3210 Ref. T4/3.01 MSC.1/Circ.1343 2 June 2010 GUIDELINES FOR THE INFORMATION TO BE INCLUDED IN A SHIP CONSTRUCTION
More information1.0 INTRODUCTION GENERAL SUPPLIER S RESPONSIBILITY CODES AND STANDARDS... 4
TABLE OF CONTENTS 1.0 INTRODUCTION... 3 1.1 GENERAL... 3 1.2 SUPPLIER S RESPONSIBILITY... 3 2.0 CODES AND STANDARDS... 4 2.1 CODES, STANDARDS AND REGULATIONS... 4 2.2 NEPTUNE ENERGY NETHERLANDS B.V. SPECIFICATIONS...
More informationIntroduction to the Classification Technical Rules
2017 Introduction to the Classification Technical Rules KR CONTENTS 1. LIST OF CLASSIFICATION TECHNICAL RULES 1 2. USER'S GUIDE TO CLASSIFICATION TECHNICAL RULES 3 2.1 General 3 2.2 User's Guide 3 2.3
More informationDesign Development of Corrugated Bulkheads
Design Development of Corrugated Bulkheads TSCF 2010 Shipbuilders Meeting 27 October 2010 Nippon Kaiji Kyokai 1 Topics Purpose of corrugated bulkheads Structural types of corrugated bulkheads Types of
More informationProject cargo Pre-Planning for Heavy Lift Transport
TechC@RE project cargo RISK FOCUS Project cargo Pre-Planning for Heavy Lift Transport No Heavy Lift transportation goes entirely according to plan! Deviations are normal as it is about a project and not
More informationHull damage experience in CSR tankers
MARITIME Hull damage experience in CSR tankers TSCF SBM, Busan October 2016 Ivar Håberg Senior Principle Surveyor, DNV GL SAFER, SMARTER, GREENER Using data to identify improvement opportunities for the
More informationRULES FOR CLASSIFICATION. High speed and light craft. Part 5 Ship types Chapter 4 Crew boats. Edition July 2017 DNV GL AS
RULES FOR CLASSIFICATION High speed and light craft Edition July 2017 Part 5 Ship types Chapter 4 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL").
More informationMOBILE OFFSHORE UNITS JULY 2008
GUIDE FOR BUILDING AND CLASSING MOBILE OFFSHORE UNITS JULY 2008 NOTICE NO. 4 August 2012 The following Rule Changes become EFFECTIVE AS OF 1 AUGUST 2012. (See http://www.eagle.org for the consolidated
More informationEnhanced Survey Programme (ESP) For CHEMICAL TANKERS. Preparation for Special Survey (Planning Document)
Enhanced Survey Programme (ESP) For CHEMICAL TANKERS Preparation for Special Survey (Planning Document) Revision 9.1 (July 2005) Lloyd s Register EMEA is a part of Lloyd s Register. Lloyd s Register EMEA
More informationEnhanced Survey Programme (ESP) For CHEMICAL TANKERS. Preparation for Special Survey (Planning Document)
Enhanced Survey Programme (ESP) For CHEMICAL TANKERS Preparation for Special Survey (Planning Document) Revision 9.2 (July 2006) Lloyd s Register EMEA is a part of Lloyd s Register. Lloyd s Register EMEA
More informationCOMMON STRUCTURAL RULES FOR DOUBLE HULL OIL TANKERS WITH LENGTH 150 METRES AND ABOVE
RULES FOR CLASSIFICATION OF SHIPS IACS COMMON STRUCTURAL RULES PART 8 CHAPTER 1 COMMON STRUCTURAL RULES FOR DOUBLE HULL OIL TANKERS WITH LENGTH 150 METRES AND ABOVE JANUARY 008 This booklet includes the
More informationDesign of Catamaran Ship Main Deck and Bulkhead to Withstand the Crane Load
International Journal of Engineering Research and Development e-issn: 78-067X, p-issn: 78-800X, www.ijerd.com Volume 8, Issue 3 (August 013), PP. 31-41 Design of Catamaran Ship Main Deck and Bulkhead to
More informationPart 3 Hull Structures
2014 Rules for the Classification of Steel Ships Part 3 Hull Structures 2014 Guidance Relating to the Rules for the Classification of Steel ships Part 3 Hull Structures Rules Guidance 2014 Rules for the
More informationStrength analysis of hull structure in container ships
CLASS GUIDELINE DNVGL-CG-0131 Edition October 2015 Amended February 2015 Strength analysis of hull structure in container ships The electronic pdf version of this document, available free of charge from
More informationMOBILE OFFSHORE DRILLING UNITS 2018
Part : Conditions of Classification RULES FOR BUILDING AND CLASSING MOBILE OFFSHORE DRILLING UNITS 208 PART CONDITIONS OF CLASSIFICATION (Supplement to the ABS Rules for Conditions of Classification Offshore
More informationPANAMA MARITIME AUTHORITY Directorate General of Merchant Marine International Representative Office, N.Y.
PANAMA MARITIME AUTHORITY Directorate General of Merchant Marine International Representative Office, N.Y. Merchant Marine Circular No.143 Panama Maritime Authority To: Shipowners/Operators, Recognized
More informationSTRUCTURAL STEEL FRAMING
SECTION 05 12 00 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 SUMMARY A. Section includes 1. Structural steel framing 2. Structural steel framing required for support and framing of rooftop mechanical
More informationRESOLUTION MSC.158(78) (adopted on 20 May 2004) AMENDMENTS TO THE TECHNICAL PROVISIONS FOR MEANS OF ACCESS FOR INSPECTIONS
RESOLUTION MSC.158(78) MSC.lS8(78) (adopted on 20 May 2004) AMENDMENTS TO THE TECHNICAL PROVISIONS FOR MEANS OF ACCESS FOR INSPECTIONS THE MARITIME SAFETY COMMITTEE, RECALLING Article 28(b) of the Convention
More informationSHIP DONATION INSPECTION PROGRAM CHECKLIST. Fair or Better Material Condition corrosion in the worst areas does not have pitting exceeding 25 percent
SHIP DONATION INSPECTION PROGRAM CHECKLIST SHIP/SUB: LOCATION: DATE INSPECTED: MUSEUM POC:. INSPECTING ACTIVITY: TASK LEAD: EMAIL: PHONE:. MAN-DAYS: # OF PERSONNEL: ALT TASK LEAD: EMAIL:. DEFINITIONS Source
More informationSECTION METAL FABRICATIONS FOR STEAM UTILITY DISTRIBUTION
PAGE 055015-1 SECTION 055015 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationRULES PUBLICATION NO. 62/P HULL SURVEYS OF GENERAL DRY CARGO SHIPS July
RULES PUBLICATION NO. 62/P HULL SURVEYS OF GENERAL DRY CARGO SHIPS 2017 July Publications P (Additional Rule Requirements) issued by Polski Rejestr Statków complete or extend the Rules and are mandatory
More informationThe TSCF/InterTanko Manual for Best Practice in the Inspection and Maintenance of Tankers
TSCF 2007 Shipbuilders Meeting The TSCF/InterTanko Manual for Best Practice in the Inspection and Maintenance of Tankers Michael G. Osborne Former Chief Naval Architect, UK, Michael.Osborne15@btopenworld.com
More informationHull Structural Design, Steel
RULES FOR CLASSIFICATION OF High Speed, Light Craft and Naval Surface Craft PART 3 CHAPTER 2 STRUCTURES, EQUIPMENT Hull Structural Design, Steel JULY 2012 The electronic pdf version of this document found
More informationPART 5 WELDING. 5.1 General 5.2 Preparation 5.3 Dimensions of welds 5.4 Materials 5.5 Aluminium alloys 5.6 Welding details 5.
PART 5 WELDING PART 5 WELDING SECTION SUBJECT 5.1 General 5.2 Preparation 5.3 Dimensions of welds 5.4 Materials 5.5 Aluminium alloys 5.6 details 5.7 Symbols WELDING Section 5.1 General 5.1.1 of structures
More informationStructural Design of 38m Special Purpose Vessel in Aluminium Alloy By Murat Tosun
Structural Design of 38m Special Purpose Vessel in Aluminium Alloy By Murat Tosun Supervisor: Prof. Dario Boote, University of Genoa Reviewer: Prof. André Hage, University of Liege Intermarine & Rodriquez
More informationThe Assessment of CSR Regulations Implementation on the Midship Strength and Structural Weight of DWT Bulk Carrier
The Assessment of CSR Regulations Implementation on the Midship Strength and Structural Weight of 77.500 DWT Bulk Carrier Ahmad Fauzan Zakki Abstract Since April 1 st 2006, all of the ships that built
More informationFLOATING CRANE TECHNICAL SPECIFICATIONS (PRELIMINARY)
FLOATING CRANE TECHNICAL SPECIFICATIONS (PRELIMINARY) 1. SCOPE: This specification covers the design, construction, test, and delivery of one nonself propelled, electrically driven floating crane for the
More informationHULL STRUCTURAL DESIGN, STEEL
RULES FOR CLASSIFICATION OF HIGH SPEED, LIGHT CRAFT AND NAVAL SURFACE CRAFT STRUCTURES, EQUIPMENT PART 3 CHAPTER 2 HULL STRUCTURAL DESIGN, STEEL JANUARY 2011 CONTENTS PAGE Sec. 1 Structural Principles...
More informationTerminal Particulars Questionnaire
Terminal Particulars Questionnaire Terminal Port Port authority Last updated Terminal General Date this TPQ document was completed/updated Specify units used Port Details Port Name UN LOCODE 3. Country
More informationSECTION STRUCTURAL STEEL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 05 12 00 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // ---// if not applicable to project. Also delete any other item or paragraph
More informationEnhanced Survey Programme (ESP) For OIL TANKERS. Preparation for Special Survey (Planning Document) Including the Survey Planning Questionnaire
Enhanced Survey Programme (ESP) For OIL TANKERS Preparation for Special Survey (Planning Document) Including the Survey Planning Questionnaire Revision 12.1 (June 2010) Lloyd s Register EMEA is a part
More informationGL has received the attached question from SAMSUNG. Will pipes of wall thickness less than 6mm be accepted?
IACS Common Structural Rules Knowledge Centre Tanker Q&As and CIs on the IACS CSR Knowledge Centre KCID No. Ref. Type Topic Date completed Question/CI Answer Attachm ent 102 11/2.1.2.1 0 Question Plate
More informationRULES FOR CLASSIFICATION. Ships. Part 5 Ship types Chapter 12 Fishing vessels. Edition July 2017 Amended July 2018 DNV GL AS
RULES FOR CLASSIFICATION Ships Edition July 2017 Amended July 2018 Part 5 Ship types Chapter 12 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL").
More informationMR. Tanker with Harmonized CSR
MR. Tanker with Harmonized CSR Ha-Young So hyso@hmd.co.kr Min-Kwon Bae bmk@hmd.co.kr Dug-Ki Min mdkjey@hmd.co.kr Hyundai Mipo Dockyard Co., Ltd, Korea Abstract HCSR(Harmonized CSR) which came into force
More informationInspection and Verification Requirements. Test Procedures for Qualification of Corrosion Resistant Steel for Cargo Tanks in Crude Oil Tankers
(Jan 2013) For Application of Regulation 3-11, Part A-1, Chapter II-1 of the SOLAS Convention (Corrosion Protection of Cargo Oil Tanks of Crude Oil Tankers), adopted by Resolution M.289 (87) The Performance
More informationSURVEY PROGRAMME for Bulk Carriers other than Double Skin Bulk Carriers
Survey Programme for BC (SH) (ver. 2016.07) SURVEY PROGRAMME for Bulk Carriers other than Double Skin Bulk Carriers Basic Information and Particulars Name of Ship : IMO Number : Flag State : Port of Registry
More informationClassNK Business Planning Department ACADEMY ClassNK Academy Center, South Asia and Oceania
ACADEMY ClassNK Academy s Mission ClassNK Academy was established in 2009 to provide people employed in the maritime industry with a working knowledge of shipping and shipbuilding, focusing specifically
More informationEstablished DOC. NO : SSI / PROFILE Rev-03
Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming
More informationLNG Carriers Ship Life Extension. Ed Waryas. Lloyd s Register North America, Inc.
LNG Carriers Ship Life Extension Ed Waryas Lloyd s Register North America, Inc. Longevity Study - Outline Owners Records Classification Records Ship inspection RAM Study Structural Integrity Analysis Owner
More informationIntroduction Introduction
Introduction Maritime International is a leading manufacturer of marine bollards and cleats worldwide. Our range of bollards and cleats is unsurpassed by any other manufacturer or supplier. Maritime can
More informationSURVEY PROGRAMME for Bulk Carriers other than Double Skin Bulk Carriers
Survey Programme for BC (SH) (ver. 2019.01) SURVEY PROGRAMME for Bulk Carriers other than Double Skin Bulk Carriers Basic Information and Particulars Name of Ship : IMO Number : Flag State : Port of Registry
More information53.3m LCT/Fuel Tanker For Sale or Charter Listing ID:
Australia - Chile - Indonesia - Great Britain - New Zealand - Panama - Philippines - South Korea - Thailand - USA E: sales@seaboats.net (sales) - E: admin@seaboats.net (accounts) 53.3m LCT/Fuel Tanker
More informationHEGER DRY DOCK, INC Structural/Marine Engineers 531 Concord Street Holliston, MA Tel Fax
HEGER DRY DOCK, INC Structural/Marine Engineers 531 Concord Street Holliston, MA 01746 Tel 508-429-1800 Fax 508-429-1811 16 87L December 7, 2016 Attention: Eddie Goldman, Senior Dockmaster (eddie.goldman@baesystems.com)
More informationTechnical Information
Subject Information of "VESSEL REQUIREMENTS FOR NEW PANAMAX" from Panama Canal Authority To whom it may concern Technical Information No. TEC-0964 Date 3 September 2013 The Panama Canal Authority (ACP)
More informationSafety of bulk carriers - prime concern of the maritime community
Safety of bulk carriers - prime concern of the maritime community D. Beghin Bureau Veritas, Paris, France ABSTRACT Further to the severe damages which occurred in the recent years on bulk carriers, the
More informationPART II. HULL 1. DESIGN PRINCIPLES
1.1 GENERAL 1.1.1 Application. 1.1.1.1 Unless provided otherwise, requirements of the present Part of the Rules apply to steel ships of welded construction, from 12 to 350 m in length whose proportions
More informationELECTRONIC INSPECTION DATA MANAGEMENT FOR SALT WATER BALLAST TANKS
ELECTRONIC INSPECTION DATA MANAGEMENT FOR SALT WATER BALLAST TANKS Marine Coatings Conference 2008 Hamburg, Germany 24 th & 25 th September 2008 Author: JF Fletcher Technical Support Manager Elcometer
More information... TEL: FAX:
PIONEER SMITH GROUP... TEL: +607-596 4070 FAX: +607-596 4071 TABLE OF CONTENT 01 INTRODUCTION OF COMPANY 02 MONITORING & MANAGEMENT COMMITTEE 03 NATURE OF BUSINESS 04 YARD LAYOUT 05 YARD FACILITIES 06
More informationZ10.2 Z10.2. Hull Surveys of Bulk Carriers
1992 (Rev.1 1994) (Rev.2 1994) (Rev.3 1995) (Rev.4 1996) (Rev.5 1996) (Rev.6 1996) (Rev.7 1997) (Rev.8 April 1998) (Rev.9 July 1999) (Rev.10 Sept. 2000) (Rev.10.1 Sept. 2000) (Rev.11 Nov. 2000) (Rev.11.1
More informationReference table of the clarification of the applicability of SOLAS regulations
(Nov 2008) (Rev.1 Dec 2012) IACS Unified s (UI) for on the application of SOLAS regulations to conversions of Single-Hull Oil Tankers to Double-Hull Oil Tankers or Bulk Carriers Single Hull Tanker to Double
More informationRULES FOR CLASSIFICATION OF FLOATING DOCKS
CHINA CLASSIFICATION SOCIETY RULES FOR CLASSIFICATION OF FLOATING DOCKS 2009 Effective from July 1 2009 Beijing CONTENTS CHAPTER 1 GENERAL...1 Section 1 GENERAL PROVISIONS...1 Section 2 SCOPE AND CONDITIONS
More informationIP 66 TECHNICAL DATA SHEET ART. S FOCUS
HIT-CRI 70W CLEAR G12 6600lm Rated luminaire luminous flux: 3696lm Rated input power: 84W Luminaire efficacy: 44lm/W (LOR: 56%) Magnetic trasformer 230 240V 50Hz EEI=A3, LOSSES=12.2W IP 66 PRODUCT TYPE
More informationWalco Equipment has grown into a successful Canadian manufacturing & distribution Company.
WALCO CARGO CONTROL COMPONENTS WINCHES H.D. Small Frame ------Page 1 Portable-----------------Page 1 Loose Frame -----------Page 1 Weld-on ----------------Page 1 Low Profile -------------Page 2 Three Bar
More informationSECTION MISCELLANEOUS METALS
PART 1 GENERAL 1.1 WORK OF THIS SECTION A. Contractor shall provide all labor, materials, equipment and incidentals as shown, specified and required to furnish and install all miscellaneous metal fabrications
More information.2 Section Waste Management and Disposal.
Issued 2006/08/01 Section 05121 Structural Steel for Buildings Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal..3 Section
More informationKodathoor Gangadharan Midhun
Kodathoor Gangadharan Midhun 7 th EMship cycle: September 2016 February 2018 Master Thesis Structural Design and Stability of a 6,000 ton Capacity Floating Dock as per DNVGL Rules Supervisor: Dr. Zbigniew
More informationPort of San Francisco. Dry Dock #2 Structural Assessment Report
Port of San Francisco Dry Dock #2 Structural Assessment Report August 2017 Table of Contents 1. Executive Summary... 4 2. Introduction... 4 2.1 Scope of Work... 4 2.2 Description... 5 2.3 Basis of Condition
More information'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
More informationConsequence Assessment of Harmonized CSR
7 th ASEF in KOBE November 7 th -8 th, 2013 Consequence Assessment of Harmonized CSR FUJII, Toshihiro OSHIMA SHIPBUILDING CO., LTD. JAPAN 1 Contents 1 Summary of Consequence Assessment 2 3 4 Weight Impact
More informationSECTION B PLAN SUBMITTAL
SECTION B PLAN SUBMITTAL Structural Design Requirements B-1 Submitting Plans... B-4 General Requirements for Plans... B-7 Midship Section Plans... B-8 Outboard Profile Plans... B-11 Inboard Profile Plans...
More informationDIVISION 05 METALS Commissioning of Metals STRUCTURAL METAL FRAMING Structural Steel Framing
DIVISION 05 METALS 05 00 00 METALS 05 01 00 Maintenance of Metals 05 01 10 Maintenance of Structural Metal Framing 05 10 20 Maintenance of Metal Joists 05 10 30 Maintenance of Metal Decking 05 10 40 Maintenance
More information