MATERIALS JEWELLERY HANDBOOK DIGITAL MANUFACTURING SOLUTIONS
|
|
- Blaze Bennett
- 6 years ago
- Views:
Transcription
1 MATERIALS HANDBOOK JEWELLERY
2 SuperWAX The only DLP printing material that melts like wax. With a melting temperature of 50 C / 122 F SuperWAX is the ideal jewellery casting material to fit within your current jewellery casting process. Super smooth surfaces with no post-processing prior to treeing. Suitable for casting platinum. Layer thickness range from 25 microns. Direct casting in gypsum and phosphate investments. Platinum / gold / silver / non-precious Melts like real wax $355 p/l Investment casting guide BURNOUT GUIDE USING GYPSUM BONDED INVESTMENT 1382 F / 750 C Hold 4 hrs 900 F / 482 C TEMPERATURE 300 F / 149 C 700 F / 371 C Cast Temperature CAST Flask Orientation: Button side down (upside down) Recommended ramp time of approximately 9 F / 5 C per minute 73 F / 23 C Start from Ambient TIME Recommendations: Investment: Kerr Satin Cast 20 using a perforated flask
3 Materials Handbook - Jewellery SuperCAST HD The smoothest parts you ll ever see! Asiga has combined years of direct-casting knowledge and for SuperCAST HD has introduced a unique nano-technology to achieve stunning surface smoothness and detail definition. Direct casting in gypsum investments Durable resin for pre-cast finishing $355 p/l Investment casting guide BURNOUT GUIDE USING GYPSUM BONDED INVESTMENT 1382 F / 750 C Hold 4 hrs TEMPERATURE 900 F / 482 C Cast Temperature 700 F / 371 C CAST 300 F / 149 C Flask Orientation: Button side down (upside down) Recommended ramp time of approximately 9 F / 5 C per minute 73 F / 23 C Start from Ambient TIME Recommendations: Investment: Kerr Satin Cast 20 using a perforated flask
4 SuperCAST v3 SuperCAST v3 is Asiga s highest definition direct-casting material for direct casting in gypsum investments. Fast printing, durable and cast under normal burnout conditions. Direct casting in gypsum investments Fast print speeds $355 p/l Investment casting guide BURNOUT GUIDE USING GYPSUM BONDED INVESTMENT 1382 F / 750 C Hold 4 hrs 900 F / 482 C TEMPERATURE 300 F / 149 C 700 F / 371 C Cast Temperature CAST Flask Orientation: Button side down (upside down) Recommended ramp time of approximately 9 F / 5 C per minute 73 F / 23 C Start from Ambient TIME Recommendations: Investment: Kerr Satin Cast 20 using a perforated flask
5 PlasGRAY Looking for a low cost client validation model? PlasGRAY is the perfect design validation material. Super smooth matte surface finish which offers clear visibility of small details and texture. Also an excellent choice for printing miniature models. Jewellery design validation. RTV moulding Miniature model making $175 p/l Technical Data COLOR TENSILE STRENGTH ELONGATION AT BREAK ELONGATION AT YIELD FLEXURAL STRENGTH FLEXURAL MODULUS HARDNESS (SHORE D) VISCOSITY GLASS TRANSITION TEMPERATURE IZOD NOTCHED-IMPACT DENSITY GRAY 51.1 Mpa 6.58 % 8.40% 86.8 MPa 1910 MPa 82 Shore D 343 mpa s 84 C 4.97 kj/m² g/cm³
6 FusionGRAY A high temperature material for vulcanised rubber moulding. Resistant to temperatures to to 160 C / 320 F. FusionGRAY offers excellent surface detail making it perfect to use as a master model material for mould making. Vulcanised rubber moulds RTV moulds Jewellery design validation. $265 p/l Technical Data COLOR GLASS TRANSITION TEMPERATURE DARK GRAY 160 C / 320 F
7
TECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationFDM Material Properties
ABS (Acrylonitrile / butadiene / styrene) Tensile Strength MPa D638 22 Tensile Modulus MPa D638 1627 Flexural Strength MPa D790 41 Flexural Modulus MPa D790 1834 Notched Izod Impact J/m D256 107 Unnotched
More informationStep-By-Step Product Selection Guide
Step-By-Step Product Selection Guide Silicone Moldmaking Materials Europe and Asia Edition If you re looking for an easy-to-use moldmaking material that will deliver consistently superior results, look
More informationSTRUCTURE OF LED ENCAPSULATION SILICONES
STRUCTURE OF LED ENCPSULTION SILICONES Structure of LED Chip 400 886 872 LED lens (Silicone) 579 868 S 871 872 579 KLM 06005 (BLU) KLM 06006 (Light) Encapsulate material (Silicone) Gold wire Lead frame
More informationSTEREOLITHOGRAPHY (SL) 3D PRINTING & ADVANCED MANUFACTURING
STEREOLITHOGRAPHY (SL) 3D PRINTING & ADVANCED MANUFACTURING FASTER TO MARKET Iterate new designs and move through product development quickly to get to market before the competition. Not only was Stratasys
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationOVERKOTE E-100 Epoxy Floor Coating Technical Data
OVERKOTE E-100 Epoxy Floor Coating Technical Data PRODUCT DESCRIPTION OVERKOTE E-100 is a floor coating system applied at a thickness of 16 to 50 mils. It is designed for long term protection of concrete
More informationHigh Performance Plastics for the Chemical Processing Industry
High Performance Plastics for the Chemical Processing Industry 8/2017 Thermoplastics Areas of application Steel pickling Plants Over the last two decades, polypropylenes have become a more common solution
More informationNoryl* Resin SE1GFN1 Europe-Africa-Middle East: COMMERCIAL
Noryl* SE1GFN1 is a 10% glass reinforced, injection moldable modified polyphenylene ether resin. Designed for improved dimensional stability and good flow, this resin also uses non-chlorinated, non-brominated
More informationTECHNYL A 218 V35 BLACK 21N
TECHNICAL DATA SHEET TECHNYL A 218 V35 Black 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal
More informationAvery Dennison Supreme Wrapping Film ColorFlow Series Easy Apply RS Long Term Removable - StaFlat Revision: 0EU Dated: 05/07/16
Uses: Avery Dennison Supreme Wrapping is a premium quality cast film designed for use in vehicle and graphics markets where special film effects are required together with a high quality finish and cost
More informationDELO-DUOPOX AD840 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD840 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component, thixotropic Use - high-strength construction adhesive - multi-purpose
More informationERTALON Extruded Products
ERTALON Extruded Products Polyamides (PA) Main Characteristics: High mechanical strength, stiffness, hardness and toughness Excellent resilience High mechanical damping ability Good sliding properties
More informationHigh Pressure Laminate General Specifications
High Pressure Laminate General Specifications High Pressure Laminate General Specs Description Attributes High Pressure Laminate (HPL) is a combination of specially developed, digitally imaged paper which
More informationLUCITE DIAKON FROST. The textured surface to provides a matt, non-glossy effect giving a cool, soft look and feel with excellent scratch resistance.
key benefits Frost is an acrylic polymer primarily designed for sheet, profile and tube extrusion where a textured surface and unique diffusing properties are key requirements. This makes Lucite Diakon
More informationHalar ECTFE. Ethylene-Chlorotrifluoroethylene Typical properties
Halar ECTFE Ethylene-Chlorotrifluoroethylene Typical properties Halar ECTFE A unique combination of properties Halar ECTFE is a melt-processable fluoropolymer manufactured by Solvay Solexis in Orange,
More informationEurogel GCP / GCTC 500 Series Iso-modified
Eurogel GCP / GCTC 500 Series Iso-modified s : Industrial, Transportation, Building, General purpose. Standard quality gelcoat, with stable storage and application properties. Good protection for polyester
More informationProudly Made in the U.S.A.
5-Year Warranty Proudly Made in the U.S.A. Cast-In-Place (wet-set) 2 Cast-In-Place (wet-set) Tactile Proudly Made in the U.S.A. In stock colors White 37875 Brick Red 20109 Yellow 33538 Blue 15187 Safety
More informationMechanical Properties Data for Pt-5 wt.% Cu and Pt-5 wt.% Ru Alloys
DOI: 10.1595/147106705X93359 Mechanical Properties Data for Pt-5 wt.% Cu and Pt-5 wt.% Ru Alloys WORK PRESENTED AS A BASIS FOR FUTURE COMPARISONS Kamili M. Jackson and Candy Lang* Centre for Materials
More informationInnovative, Thermally Conductive Silicone Solutions for LED Lighting
Innovative, Silicone Solutions for LED Lighting Better Performance and Reliability for your Lighting Designs With Dow Corning, You Have a Powerful Ally for Thermal Management Heat remains the enemy of
More informationVECTRA A150 LCP Glass Reinforced
Description Improved creep resistance over A130. May reduce warpage in some parts compared to A130. 50% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant
More informationTORLON Polyamide-Imide Processing and Curing
TORLON Polyamide-Imide Processing and Curing TORLON Processing OVERVIEW Resin preparation Mold design Machine settings Processing temperatures Regrind Curing Machining Post machining curing General Processing
More informationMore. with 3M Glass Bubbles. High-strength additives for reduced part weight, improved dimensional stability, enhanced processing and much more.
3M Glass Bubbles For Resin Systems Injection molding image courtesy of AP Plasman. Do More with 3M Glass Bubbles High-strength additives for reduced part weight, improved dimensional stability, enhanced
More informationFORTRON 6165A6 PPS Mineral / Glass Reinforced
Description Fortron 6165A6 is an easier flow version of Fortron 6165A4. It offers similar characteristics to the 6165A4. Applications include electronic components (i.e. lamps housings and sockets) and
More informationValox* Resin 310SE0 Asia Pacific: COMMERCIAL
VALOX 310SE0 is an unreinforced, flame retardant PBT injection moulding resin. Applications: electrical industry, bobbins, keyboard, switches and switch components and appliance housings. MECHANICAL Tensile
More informationUse: pulleys 700 mm and below, for medium tension belts. For tension drums and idler rollers, see TRS A-120 rubber.
Lagging for pulleys and rollers LAGGING RUBBER MINI TRS MINI 60 profiled lagging for drive pulleys is used for improving the friction coefficient between the drive pulley and the conveyor belt. It prevents
More informationSolef & Hylar PVDF. Polyvinylidene fluoride Typical properties
Solef & Hylar PVDF Polyvinylidene fluoride Typical properties Solef and Hylar PVDF A remarkable combination of properties PVDF is a fluorinated semicrystalline thermoplastic which is obtained by polymerizing
More informationRILSAN POLYAMIDE FAMILY AN EXTREME WORLD NEEDS EXTREME MATERIALS
RILSAN POLYAMIDE FAMILY AN EXTREME WORLD NEEDS EXTREME MATERIALS POLYAMIDE PORTFOLIO 2 POLYAMIDE PORTFOLIO Ultra high performance PA 11 resins, alloys and ready-touse powder coatings. Tremendous toughness
More informationA typical joint sample is 140mm long and is held in specially designed clamps.
Vulc-O-rings One of our oldest and most popular products is the Hot Vulcanised Cord ring ( Vulc-O-ring ). Eriks has developed a very successful method of producing O-rings from extruded cord to a very
More informationCATALOG. Potting & Encapsulation Materials
CATALOG Potting & Encapsulation Materials Design Compromise Not An Option? Ask Us How. At, we have been developing custom potting and encapsulant solutions for more than 40 years. Whether utilizing epoxy,
More informationEPOXY FLOORING SYSTEMS
EPOXY FLOORING SYSTEMS DuroPoxy SLR 100 Epoxy Based Durable Top-Coat Coloured Floor Coating EPOXY FLOORING SYSTEMS Description: DuroPoxy SLR100 is a solvent free, durable floor coating based on a hard
More informationExolit Flame Retardants for Plastics
Pigments & Additives Division Specialties Business Exolit Flame Retardants for Plastics > The Business Unit Plastic Industries offers an extensive range of flame retardants for thermoplastic and thermoset
More informationFeatures Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity
Properties and Part Selection Overview Selection Table - Epoxy-Based Adhesive Properties Features Conductive Room Temperature Cure Product Ref 120 132 4461IP 42IP 438 700 Properties High electrical conductivity
More informationRTV 11. RTV 11, Silicone Rubber Compound
, Silicone Rubber Compound Product Description RTV11 silicone rubber compound is a general purpose two-part silicone elastomer. It is supplied in ready-to-use with a base compound and DBT (dibutyl tin
More informationSupport Systems for Rooftop Building Services. ecosupportproducts.com. protect the roof. protect the warranty. protect the environment.
Support Systems for Rooftop Building Services ecosupportproducts.com protect the roof. protect the warranty. protect the environment. Why EcoFoot? The design of the EcoFoot was derived from necessity.
More informationHigh Modulus Carbon Fibres in Super-Structural Compounds
High Modulus Carbon Fibres in Super-Structural Compounds As a matter of fact, even if composite properties guarantee the best answer to the most severe project requirements, many industrial products can
More informationLaminating resin MGS L 335
1.1-18 Laminating resin MGS L 335 Hardeners MGS 335, 340 page Characteristics 19 Application 20 Gel time 21 Processing details 21 Specifications 21 Temperature development 22 Mixing ratios 22 DMA 23 T
More informationRAKU-TOOL Boards USA. There is a solution for every challenge: RAKU-TOOL. Distributed By:
USA RAKU-TOOL Boards There is a solution for every challenge: RAKU-TOOL. Distributed By: ThyssenKrupp Materials NA w We find solutions for your applications Performance proven solutions with RAKU-TOOL.
More informationFiberLite FRP. Technical Data. Class C - Pages 1-2 Class A - Pages 3-4
FiberLite FRP Technical Data Class C - Pages 1-2 Class A - Pages 3-4 Technical Data NUDO FiberLite FRP 3004N.C Rev. 11 8/13 NUDO FiberLite FRP Class C Embossed and Smooth Wall & Ceiling Panels NUDO FiberLite
More informationProducing Metal Parts
Producing Metal Parts CNC vs. Additive Manufacturing www.3dhubs.com METAL KIT 2 Introduction This Kit discusses how to select the right manufacturing process for metal parts by comparing CNC and Additive
More informationLEAF PANEL LED PANEL. Last News
LEAF PANEL LED PANEL LEAF PANEL is the first end solution we offer from only 9 mm, the thinnest led panel with no frame in the market. Is the perfect lighting tile with smooth light no frame no dark shine.
More informationAdditive Manufacturing. Build on our experience
Additive Manufacturing Build on our experience What is Additive Manufacturing? Additive manufacturing or rapid prototyping is almost magical. In conventional machining processes, material is removed from
More informationTOGETHER WE ENTER THE DIGITAL WORLD
TOGETHER WE ENTER THE DIGITAL WORLD SCANNING PRINTING MILLING Discover your full Novux solution www.zahndental.com/novux Exclusively Available from ZAHN DENTAL Exclusively Available from ZAHN DENTAL SCAN
More informationTooling gelcoat MGS F 300
3-15 Tooling gelcoat MGS Hardener MGS page Characteristics 15 Application 16 Specifications 20 Processing details 20 Mixing ratios 20 DMA 21 Content Application tooling Characteristics Operational temperature
More informationPlastering. Holiday Inn - Sultanate of Oman
1 208 Holiday Inn - Sultanate of Oman Gyproc GypFine Plasters provide the ultimate skimming solutions for today s high-end finish. They are formulated to suit a wide variety of backgrounds including plasterboard,
More informationVapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring
advanced moisture control, inc. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring 250 polished concrete slabs! Made in Southern California,
More informationEPOXY.COM System 315 Polymeric Chip Flooring
EPOXY.COM System 315 Polymeric Chip Flooring Floors have a special role to play in interior design. The heavy technical demands made on floors often make the use of certain decorative products simply impossible.
More informationPolypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene):
Polypropylene (PP) Technical University of Gabrovo Milena Koleva General General Polypropylene or polypropene (PP) is a thermoplastic polymer, made from the monomer propylene (propene): Its molecular mass
More informationDELO MONOPOX AD286 heat curing, construction adhesive
DELO MONOPOX AD286 heat curing, construction adhesive Base - epoxy resin, construction adhesive - one-component, heat-curing, filled, thixotropic Use - for the bonding of all metal types, temperature-resistant
More informationCoatings - Linings - Fireproofing. Thermo-Lag E100. Epoxy Intumescent Fireproofing
Coatings - Linings - Fireproofing Thermo-Lag E100 Epoxy Intumescent Fireproofing Thermo-Lag E100 is an epoxy intumescent fireproofing system with an advanced formulation eliminating the need for a mesh
More informationCoatings - Linings - Fireproofing. Thermo-Lag E100. Epoxy Intumescent Fireproofing
Coatings - Linings - Fireproofing Thermo-Lag E100 Epoxy Intumescent Fireproofing Thermo-Lag E100 is an epoxy intumescent fireproofing system with an advanced formulation eliminating the need for a mesh
More informationThermo-Lag E100. Epoxy Intumescent Fireproofing
Thermo-Lag E100 Epoxy Intumescent Fireproofing Thermo-Lag E100 is an epoxy intumescent fireproofing system with an advanced formulation eliminating the need for a mesh reinforcement layer. It was specifically
More informationRTV31, RTV60 and RTV88 silicone rubber compounds differ primarily in viscosity in the uncured state.
Technical Data Sheet RTV31 Description RTV31, RTV60 and RTV88 silicone rubber compounds are high temperature two-part silicone elastomers. They are supplied ready-to-use with a base compound and DBT (dibutyl
More informationRTV31, RTV60 and RTV88 silicone rubber compounds differ primarily in viscosity in the uncured state.
Technical Data Sheet RTV88 Description RTV31, RTV60 and RTV88 silicone rubber compounds are high temperature two-part silicone elastomers. They are supplied ready-to-use with a base compound and dibutyl
More informationTECHNICAL DATA SHEET GRILON TS V0
TECHNICAL DATA SHEET GRILON TS V0 General product description Grilon TS V0 is an unreinforced, normal viscosity, self-extinguishing PA66 + PA6 injection moulding grade. Grilon TS V0 has the following important
More informationLOW VISCOSITY STRUCTURAL EPOXY. Table of Contents. Made in the U.S.A. AF35LVE TECHNICAL DATA SHEET
1 Table of Contents PRODUCT DESCRIPTION PRODUCT NUMBER GENERAL USES AND APPLICATIONS ADVANTAGES AND FEATURES STANDARDS AND APPROVALS AVAILABILITY COLOR AND RATIO INSTALLATION AND COVERAGE STORAGE/SHELF
More informationAKROMID T (PPA) AKROLOY PA (PA Blend) + PARA
COMPOUNDS FOR METAL REPLACEMENT AKROMID T (PPA) AKROLOY PA (PA Blend) + PARA AKRO-PLASTIC GmbH Member of the Feddersen Group Meeting Your Requirements For decades, polyamides have formed the leading group
More informationTEKTON Flashings and TEKTON Construction Tape
TEKTON Flashings and TEKTON Construction Tape Complete the system with TEKTON Flashings and Construction Tape. It is important to assure a tight building envelope when windows and siding are installed.
More informationTECHNYL C 50H2 NATURAL
TECHNYL C 50H2 NATURAL Description TECHNYL C 50H2 Natural is a unreinforced melamine cyanurate flame retarded polyamide 6. This product is heat stabilised and can be used for injection moulding and extrusion
More informationPB 250, PB 400 / SD 560x Resilient & ambient curing epoxy foam
PB 250, PB 400 / Resilient & ambient curing epoxy foam Page 1 / 5 PB products are 2 component epoxy foaming formulations developed for in situ low density epoxy foam production. Foam final density is depends
More informationS OZ. WOVEN POLYETHYLENE F. R. S-3 KLEAR SPAN FR S-6 18 OZ. VINYL COATED POLYESTER (VCP) INNOVATIVE SOLUTIONS PRECISION RELIABILITY
S-2 5.6 OZ. WOVEN POLYETHYLENE F. R. A 1000 denier tape woven into a fabric and coated 2.2 mil on both sides. An economic, light weight yet durable material for industrial applications for indoor use only.
More informationTECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS ITEM 00663 TRAFFIC BUTTONS & PAVEMENT MARKERS 663.1 Description. This item shall consist of furnishing and installing traffic buttons and reflectorized pavement markers and jiggle
More informationcoloured glass effect panels commercial applications
b r i l l i a n t coloured glass effect panels commercial applications www.akril.uk.com www.akril.uk.com b r i l l i a n t what is akril? Akril is an acrylic polymer glass which has been coated with a
More informationAutomotive: Applications, Processes and products -- Fiberglass for PA Reinforcement. Dr. Heinz Zhang. Product R&D Center
Automotive: Applications, Processes and products -- Fiberglass for PA Reinforcement Dr. Heinz Zhang Product R&D Center Overview 1 Fiberglass Reinforced Thermoplastic Composites 2 PA & Fiberglass Reinforced
More informationFab Flooring India India's No1 Rubber Flooring Manufacturer
Fab Flooring India India's No1 Rubber Flooring Manufacturer GYM FLOORING RUBBER FLOORING PLAY AREA FLOORING OUTDOOR FLOORING RUBBER MATS INTERLOCKING RUBBER FLOORING RECYCLED RUBBER FLOORING Toll Free
More informationSILICONE RUBBER GUM HTV (HCE) RTV FSR LSR. OH Polymer. SiSiB SILICONES. A part of PCC group.
SILICONE RUBBER GUM RTV HTV (HCE) LSR FSR OH Polymer SiSiB SILICONES A part of PCC group. Nanjing SiSiB Silicones Co., Ltd. FSR Silicates SiSiB SILICONES, a part of PCC group, is one of the leading manufacturers
More informationTECHNICAL DATA: Politura Micro Cement
TECHNICAL DATA: Politura Micro Cement Product Description: Politura is a Polymer Modified Micro Cement that was created after years of research, development and decades of experience having introduced
More informationDuPont Superstructural Web Seminar
DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT February 28, 2006 DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT The information and
More informationPlotter Materials. CAD/CAM Vinyls. Lead chromate free REACH & RoHS - compliant. Engineered to Perform Better
Plotter Materials CAD/CAM Vinyls Lead chromate free REACH & RoHS - compliant Engineered to Perform Better ORAFOL s Headquarters Located just outside of Berlin in the heart of Europe, the ORAFOL Europe
More informationSEMI-FINISHED PRODUCTS
SEMI-FINISHED PRODUCTS Sheets, Round Bars, Welding Rods For more information about Agru America and our products, visit agruamerica.com Worldwide Excellence in Plastics and Geosynthetics Agru America is
More informationLASER SINTERING (LS) 3D PRINTING & ADVANCED MANUFACTURING
LASER SINTERING (LS) 3D PRINTING & ADVANCED MANUFACTURING MANUFACTURING GAME CHANGER Go beyond conventional techniques to access a new level of production freedom using engineering thermoplastics. Additive
More informationPERSPECTIVES IN PLASTICS
PERSPECTIVES IN PLASTICS Welcome to the world of plastics of PiO Let s achieve things together! Our philosophy WE WOULD LIKE TO BE A RELIABLE PARTNER FOR OUR CUSTOMERS PiO is specialized in delivery and
More informationDiscover the NYCAST Advantage. Cast Nylon Stock Shapes & Custom Cast Products
Discover the NYCAST Advantage Cast Nylon Stock Shapes & Custom Cast Products Discover the NYCAST Advantage Cast Nylons Limited (CNL) is the premier producer of cast nylon in North America. Our people,
More informationCYCOM 2020 EPOXY PREPREG
DESCRIPTION CYCOM 2020 is a versatile curing, toughened epoxy resin that can be cured from 180 F to 350 F (80 C to 180 C), depending on service temperature requirements. This prepreg resin extracts the
More informationSPECIA LT Y SEA LANT S
SPECIA LT Y SEA LANT S Novagard Flowable Sealants - 200 Series Description: Ideal for general industrial sealing and bonding applications requiring a flowable product, but retains enough thixotropy to
More informationUltra High Molecular Weight Polyethylene (UHMWPE)
Ultra High Molecular Weight Polyethylene (UHMWPE) UTEC is the trade name of the Ultra High Molecular Weight Polyethylene (UHMWPE) developed and produced by Braskem with its own catalyst and production
More informationPALIGHT. Flat Foamed PVC Sheet. CREATING SOLUTIONS
PALIGHT Flat Foamed PVC Sheet CREATING SOLUTIONS www.palram.com PALIGHT Introduction PALIGHT is a lightweight, flexible and durable foamed PVC sheet that is ideal for advertising and construction. It brings
More informationXIAMETER RTV-4250-S Kit Green
XIAMETER RTV-4250-S Kit Green High strength silicone moldmaking rubber FEATURES Outstanding release properties If required the product cure can be heat accelerated Fast thick section cure at room temperature
More informationPart 1 - General. Spec Component Sikadur 32 Hi-Mod. DIVISION 3 -CONCRETE Section Cast-in-Place Concrete Bonding Agents for Concrete
Spec Component 042-0101 Sikadur 32 Hi-Mod DIVISION 3 -CONCRETE Section 03300 Cast-in-Place Concrete Bonding Agents for Concrete Part 1 - General 1.01 Summary A. This specification describes the bonding
More informationPRIREV. ZI Vagos, lote
2017 PRIREV We are the only Portuguese company that provides Decorative PVD services in several business areas. Our mission is make our partners more competitive in their markets with higher added value
More informationEpoxide equivalent weight ASTM D 1652 g/eq C (77 F), Brookfield ASTM D 2196 cp or mpa.s 650
Starting Formulation EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Epoxy Resin System for Infusion and RTM EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Introduction EPON FlameX
More informationALESSIO CARLOTTO PROGOLD S.p.a., TRISSINO (VI), ITALY.
ALESSIO CARLOTTO PROGOLD S.p.a., TRISSINO (VI), ITALY. Alessio Carlotto obtained his Bachelor Degree in Industrial Chemistry at Padua University. He has been a member of Progold S.p.A.'s Research and Development
More informationPARALOID EXL 2314 Impact Modifier
Technical Data Sheet PARALOID EXL 2314 Impact Modifier Weatherable Impact Modifier For Engineering Resins Regional Product Availability Introduction North America Japan/Korea Asia Europe PARALOID EXL 2314
More informationFORTRON 1140L4 PPS Glass Reinforced
Description Fortron 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently
More informationVectra. Product Information. Europe
Europe Vectra liquid crystal polymers (LCP) high melt flow, easily fills long, thin complicated flow paths with minimal warpage heat deflection up to 300 C high mechanical strength excellent dimensional
More informationTECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets
Pag. 1/6 TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets This category of items is in continuous evolution. The raw material from which it is made is the first component that must be analyzed
More informationEPOXY RESIN SYSTEMS FOR HIGH PERFORMANCE FRP
EPOXY RESIN SYSTEMS FOR HIGH PERFORMANCE FRP MOULDS Dr Mahesh Soni * GM Research & Development - Polymers / Atul Ltd mahesh_soni@atul.co.in Dr Utkarsh Shukla Manager Research & Development - Polymers /
More informationEPIKOTE Resin MGS BPR 435 EPIKURE Curing Agent MGS BPH
Product Bulletin Wind Energy Industrial bonding paste with outstanding fatigue performance EPIKOTE Resin MGS BPR 435 EPIKURE Curing Agent MGS BPH 434 439 The EPIKOTE Resin MGS BPR 435 system series was
More informationAraldite EP 300 A/B High Temperature Adhesive
Araldite EP 300 A/B High Temperature Adhesive Product Description Araldite EP 300 A/B Adhesive is an extrudable, two-component, room temperature curing epoxy adhesive designed for service temperatures
More informationAraldite MY pbw Hardener HY pbw
Vantico Ltd Electronic Polymers Heavy Electrical Araldite Impregnating Resin System Araldite MY 750 100 pbw Liquid, impregnating resin system with low glass transition temperature for coils with excellent
More informationEPOTUF Product Code: Aliphatic Amidoamine Curing Agent
January 2001 EPOTUF 37-620 Product Code: 37620-00 Aliphatic Amidoamine Curing Agent DESCRIPTION EPOTUF 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF epoxy
More informationDuPont Zytel HTN51G50HSL BK083 (Preliminary Data)
PRODUCT INFORMATION DuPont Zytel HTN51G50HSL K083 (Preliminary Product Information Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature,
More informationAdhesives silicones solutions
Bluesil Adhesives silicones solutions for electronic devices & electrical engineering www.bluestarsilicones.com Silicones solutions for on board electronics Silicones materials ensure that electrical and
More informationDATA SHEET A5000 RELEASE FILM
A5000 RELEASE FILM HAWKEYE A5000 RELEASE FILM is a high temperature release film which lends itself readily to overcome bridging in contour layups. With more elongation than the HK3760 or nylon films,
More informationTypical Properties Specification Writers: These values are not intended for use in preparing specifications.
Technical Data Sheet is a two-part, neutral-cure, RTV silicone sealant. Features & Benefits Approved for structural and weatherseal applications 1 Meets ASTM C719 Class 25 (G, A, O) Meets ASTM C1184 Structural
More informationFirst Class Building Products, Inc.
PART 1- GENERAL 1.01 SUMMARY First Class Building Products, Inc. A. Related sections: 1.02 REFERENCES GLASS-FIBER REINFORCED GYPSUM (GRG) 1. Division 5, Metal Stud Framing 2. Division 7, Sealants 3. Division
More informationDryflex TPV. Thermoplastic Vulcanisate Compounds
Dryflex TPV Thermoplastic Vulcanisate Compounds CONTENTS INTRODUCTION SERIES OVERVIEW PRODUCT TESTING & PERFORMANCE What is TPV? Compression Set Behaviour TPV or TPS? GRADE TABLES Influence of Oil Dryflex
More informationSpecialty Adhesives for Graphic Arts Applications SIGNS FRAMES GRAPHICS DISPLAYS
Specialty Adhesives for Graphic Arts Applications SIGNS FRAMES DISPLAYS GRAPHICS SIGNS GRAPHICS FRAMES DISPLAYS LABELS IMAGE PLAQUES NAMEPLATES S capa North America is a world-class manufacturing operation
More informationPC/ABS RECOVERED FROM SHREDDED WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT
PC/ABS RECOVERED FROM SHREDDED WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT Arthur Schwesig and Brian Riise MBA Polymers Austria Kunstoffverarbeitung GmbH., Kematen and der Ybbs, Austria Abstract Our industry
More informationDIRECT 3D PRINTING: NEW OPPORTUNITIES FOR JEWELRY PRODUCTION
DAMIANO ZITO DIRECT 3D PRINTING: NEW OPPORTUNITIES FOR JEWELRY PRODUCTION PRESENTATION STRUCTURE AT YOUR GLANCE Introduction History of production processes and 3D direct precious metal printing overview
More information