Simulate the elegance of granite or terrazzo. floors. Liquid Granite and Liquid Terrazzo. combine epoxy and color chips to create

Size: px
Start display at page:

Download "Simulate the elegance of granite or terrazzo. floors. Liquid Granite and Liquid Terrazzo. combine epoxy and color chips to create"

Transcription

1 Liquid Granite TM and Liquid Terrazzo TM Simulate the elegance of granite or terrazzo floors. Liquid Granite and Liquid Terrazzo combine epoxy and color chips to create seamless, decorative floor coatings. Designed for use in showrooms, restaurants, garages, recreation rooms, washrooms, and kitchens, Liquid Granite and Liquid Terrazzo coatings are chemical resistant and seamless, perfect for both residential and commercial applications. Ultra-tough. Protective. Our water-based and 100% solids epoxies are specially formulated for seamless and high build applications. Perfect for industrial floors in factories, restaurant kitchens, schools, hospitals, garage floors, and warehouses, the Epoxy Coat product line delivers strong, long-lasting protection and easy to clean epoxy finishes. 770 Gateway Center Drive San Diego, CA Fax westcoat.com F O P O F E S S I O N A L U S E O N L Y

2 F O P O F E S S I O N A L U S E O N L Y Extremely long wearing Liquid Granite and Liquid Terrazzo promise durability in both residential and commercial applications. This protective surface will withstand foot and light vehicle traffic. Easy clean-up Spend less time on messes. These systems ensure quick and easy clean-up using many common household cleaners. Low odor available 100% solids or water-based materials offer low odor applications for sensitive areas. Be sure to specify low odor for all occupied areas. Low build or high build At approximately 1/16, these systems will not be a trip hazard. If required, higher build systems can be specified to help eliminate substrate imperfections from telegraphing through. Versatile Can be installed over plywood when used in conjunction with Westcoat s ALX system. Available in 16 Color Chip blends, allowing for hundreds of variations when color base is varied. One day process available A fast drying three coat system can be installed when one day is all you have. For most installations allow 2-3 days. Advantages Durable USDA compliant Seamless Easy to clean Chemical resistant 100% solids and water-based systems One day systems Low odor Decorative High build Wide range of pre-blended colors Cost-effective Liquid Granite Concrete Primer Broadcast Topcoat Liquid Terrazzo Concrete Primer Broadcast Topcoat 770 Gateway Center Drive San Diego, CA Fax westcoat.com F O P O F E S S I O N A L U S E O N L Y

3 SPECIALTY COATING SYSTEMS SYSTEM SPECIFICATION Liquid Granite and Liquid Terrazzo Description Liquid Granite and Liquid Terrazzo are 100% solids epoxy, floor-coating systems with color chips broadcasted into the pigmented epoxy and sealed with a clear topcoat. The Liquid Granite is a full broadcast color system, and the Liquid Terrazzo is a light broadcast color system. Uses Liquid Granite and Liquid Terrazzo are designed for use in showrooms, restaurants, garages, recreation rooms, washrooms, and kitchens. Liquid Granite or Liquid Terrazzo is a decorative, durable chemical resistant coating which makes it perfect for residential and commercial applications. Liquid Granite and Liquid Terrazzo are designed to be used as a light duty coating. Advantages Chemical esistant Durable Decorative High Build Seamless Easy Clean-up USDA Compliant Choice of Colors Can be Installed Solvent Free Packaging EC-72 Epoxy Patch Gel (½ and 2 gallon kits) EC-12 Epoxy Primer (1½ and 15 gallon kits) EC-34 Epoxy Topcoat (1½ and 15 gallon kits) EC-32 Epoxy Clear Topcoat (1½ and 15 gallon kits) TC-60 Color Chips (55 lb boxes sold per lb) Inspection Concrete must be clean, dry, and free of grease, paint, oil, dust, curing agents, or any foreign material that will prevent proper adhesion. The concrete should be at least 2500 psi and feel like 50 to 80 grit sandpaper. The concrete should be porous and able to absorb water. A minimum of 28 days cured is required on all concrete. Before starting flooring work, test existing concrete slab for efflorescence, moisture, and hydrostatic pressure. Moisture All concrete should be tested for moisture before applying a seamless coating. Water vapor transmission upwards through on-grade concrete slabs may result in loosening of epoxy floors or improper curing of epoxy Crack Filler Mix 1 part A with 1 part B (by volume) of EC-72 Epoxy Patch Gel for 3-4 minutes and apply to the crack using a trowel or putty knife. Patch all spalls and cracks with EC-72. The material may be slightly overfilled in the crack and sanded or ground smooth. This remedial approach to patch cracks is not guaranteed and it should be noted that when the substrate moves, it could likely crack the Liquid Granite or Liquid Terrazzo System. Primer Mix 2 parts A with 1 part B (by volume) EC-12 Epoxy Primer together for 3-4 minutes. Immediately apply at a rate of (5-8 mils) square feet per gallon using a trowel or squeegee and then back roll to ensure complete coverage. Be sure to apply up cove to termination point. INSPECTION / PEPAATION APPLICATION 1 of 3 materials. If moisture emissions exceed 5 lbs./1000 sq ft. contact the manufacturer before application. Preparation Pre-cut and clean all cracks and joints with a concrete diamond blade to at least ¼ x ¼ inch. Prepare concrete to a profile equal to 50 to 80, grit sandpaper. You may mechanically profile by grinding, shot blasting, scarifying, or water blasting. Methods may vary according to the thickness of the coating to be applied and the condition and hardness of the concrete. Other factors include the forecasted use of the surface and the environment in which it is to be installed. When preparing the surface use caution when shot blasting around pools, scarifying too aggressively, leaving grinding marks or grinding too smooth. For maximum penetration into the concrete, thin by adding 1-2 quarts of acetone to each 1½ gallon kit. Thinned material must be applied at no more than 5 mils (and not allowed to puddle) to cure properly. Broadcast Coat Mix 2 parts A and 1 part B (by volume) of EC-34 Epoxy Topcoat, for color consistency, box all part A s. Apply at the rate of square feet per gallon. Granite Look: Broadcast premixed color chips into the EC-34 to refusal, until no shiny spots are evident, approximately 10 square feet per pound. After the EC- 34 has cured, sweep excess chips and sand or scrape aggressively with drywall scraper. Sweep again and Granite/Terrazzo 4/14

4 vacuum loose chips. Terrazzo Look: Sprinkle premixed color chips into the wet base coat evenly, approximately 100 square feet per pound. After the base coat has cured you may scrape or lightly sand the surface to smooth the chips. Sweep, blow or vacuum any loose chips. Topcoat Mix 2 parts A and 1 part B (by volume) of EC-32 Epoxy Clear Topcoat. Mix completely for 4-5 minutes and immediately get the mix onto the floor. Apply EC-32 Epoxy Clear Topcoat at approximately square feet per gallon. Do not allow material to sit in the mixing bucket. After the topcoat has dried you may sand or scrape rough spots and apply a second coat of EC-32 at approximately square feet per gallon. Optional Materials Water-Based System For a completely water-based, faster installation system, EC- 11 Water-Based Epoxy may be used for the primer, broadcast coat and topcoat. UV esistance For greater UV protection, especially for Terrazzo, use EC-95 Pigmented Polyurethane for the Broadcast Coat. Skid esistance Interior Floors can be dust mopped daily or mopped using a low ph cleaner. For more information on floor care & maintenance, please refer to the General Maintenance sheet. This system is designed for professional use only. ead individual Product Specification sheets for each product you will be using before beginning the project. For interior use only. Be sure to do adequate surface preparation. Test for moisture in concrete and vapor drive. Be sure to measure and mix properly. Be aware of the pot life of mixed epoxy. Inhalation of vapor or mist can cause headache, nausea irritation of nose, throat, and lungs. Avoid breathing vapors, it is strongly recommended that respirators are worn. Prolonged or repeated skin contact can cause slight skin irritation. All epoxies have the potential of causing skin irritations or allergic reactions. Be careful not to get on MAINTENANCE LIMITATIONS HEALTH PECAUTIONS CA-30 or CA-31 Safe Grip maybe added to the EC-34 for skid resistance. TC-70 Silica Sand at mesh can be broadcasted into the primer or topcoat and backrolled for skid resistance. Additional Topcoat For an additional topcoat, apply a second coat of EC- 32 at approximately square feet per gallon (4-5 mils). For greater chemical, UV and mar resistance apply EC- 95 Clear Polyurethane Topcoat at approximately square feet per gallon (5-8 mils). See Product Specification sheets for detailed instructions ecoating If additional coats are desired, they must be applied with in 24 hours, or the cured material must be sanded and wiped with acetone before application. Protection of Finished Work Prohibit traffic on floor for 48 hours after installation. Avoid heavy abrasion and chemical exposure for 5 days. Allow 72 hours minimum for vehicular traffic. Clean Up Uncured material can be removed with solvent. If cured, material can only be removed mechanically or with an environmentally-safe solvent. The Liquid Granite/Terrazzo System should be inspected for wear every 2 to 4 years. The system should be resealed with the appropriate Westcoat topcoat every 3 to 5 years depending upon traffic and UV exposure. Contact the original Installer of Westcoat for complete recoating instructions. Do not apply in temperatures below 50 F or above 90 F. Cooler temperatures will cause slower dry times. Do not allow Westcoat product to freeze. Thinly applied coatings may not hide epoxy patches, rough concrete or shotblast tracks. Heavier topcoat may become slippery. Approval and verification of proposed colors, textures, and slip resistance is recommended. skin, clothes or in eyes. Gloves are strongly recommended. If splashed in the eye, flush with warm weather and contact a physician if blurring persists. Solvent based products are extremely flammable, extinguish all pilot lights and sources of ignition such as electrical motors. Be sure to have adequate cross ventilation prior to installing. 2 of 3 Granite/Terrazzo 4/14

5 DISCLAIME PUCHASE S SOLE AND EXCLUSIVE EMEDY AGAINST THE MANUFACTUE OF WESTCOAT, SHALL BE LIMITED SOLELY TO THE EPLACEMENT OF ANY DEFECTIVE MATEIAL O A PAYMENT BY THE MANUFACTUE IN AN AMOUNT EQUAL TO THE COST OF THE OIGINAL MATEIAL. SUGGESTED BASE COLOS Color Chip Blend Liquid Granite Suggested Base Colors Liquid Terrazzo Suggested Base Colors Taupe Tweed Travatan or Deep Tan Travatan, Omaha Tan or Deep Tan Sandstone Travatan or Deep Tan Shadow Cape Cod Gray or Pewter Gray Pewter Gray, Cape Cod Gray or Black Forest Cape Cod Gray or Lawn Green Travatan, Cape Cod Gray or Black Atascadero Travatan or Deep Tan Travatan, Omaha Tan or Deep Tan Dove Gray Cape Cod Gray or Pewter Gray Pewter Gray or Cape Cod Gray Granite Cape Cod Gray or Pewter Gray Pewter Gray, Cape Cod Gray or Black Storm Cloud Concrete Gray or Cape Cod Gray Pewter Gray, Cape Cod Gray or Black Autumn Deep Tan or Travatan Travatan, Deep Tan or Tile ed Niagara Cape Cod Gray or Slate Blue Pewter Gray, Cape Cod Gray or Slate Blue Mocha Tweed Deep Tan or Travatan Travatan, Deep Tan or Tile ed Desert Storm Travatan, Arizona Tan, Deep Tan or Black ose Mission ed or Tile ed Travatan, Mission ed or Tile ed Cappuccino Deep Tan or Arizona Tan Travatan, Omaha Tan or Deep Tan Pecan Pistachio Concrete Gray or Cape Cod Gray Arizona Tan, Cape Cod Gray or Black 770 Gateway Center Drive San Diego, CA Fax westcoat.com 3 of 3 Granite/Terrazzo 4/14

6 Color Chip Blends TC-60 This chart is for reference only. Viewing any color chart is less accurate than a cured sample. Please apply sample on site before beginning any project. A p p l i e d a t Fu l l B r o a d c a s t Ta u p e Tw e e d 111 S a n d s t o n e 10 9 S h a d o w 107 Forest 103 A t a s c a d e r o 10 0 D o v e G r a y 10 2 G r a n i t e 10 4 S t o r m C l o u d 110 A u t u m n 10 1 N i a g a r a 10 6 M o ch a Tw e e d 10 5 D e s e r t S t o r m 11 2 o s e 116 C a p p u c c i n o 11 4 Pe c a n 115 P i s t a ch i o G a t e w a y C e n t e r D r i v e S a n D i e g o, C A These colors are approximate and will vary F a x w e s t c o a t. c o m F O P O F E S S I O N A L U S E O N L Y

7 Color Chip Blends TC-60 S U G G E S T E D B A S E C O L O S Color Chip Blend Taupe Tweed 111 Sandstone 10 9 Shadow 107 Forest 103 Atascadero 100 Dove Gray 102 Granite 104 Storm Cloud 110 Autumn 101 Niagara 10 6 Mocha Tweed 10 5 Deser t Storm 112 ose 116 Cappuccino 114 Pecan 115 Pistachio 113 Liquid Granite Suggested Base Colors Travatan or Deep Tan Cape Cod Gray or Pewter Gray Cape Cod Gray or Lawn Green Travatan or Deep Tan Cape Cod Gray or Pewter Gray Cape Cod Gray or Pewter Gray Concrete Gray or Cape Cod Gray Deep Tan or Travatan Cape Cod Gray or Slate Blue Deep Tan or Travatan Mission ed or Tile ed Deep Tan or Arizona Tan Concrete Gray or Cape Cod Gray L i q u i d Te r r a z z o S u g g e s t e d B a s e C o l o r s Travatan, Omaha Tan, or Deep Tan Travatan or Deep Tan Pewter Gray, Cape Cod Gray, or Black Travatan, Cape Cod Gray, or Black Travatan, Omaha Tan, or Deep Tan Pewter Gray or Cape Cod Gray Pewter Gray, Cape Cod Gray, or Black Pewter Gray, Cape Cod Gray, or Black Travatan, Deep Tan, or Tile ed Pewter Gray, Cape Cod Gray, or Slate Blue Travatan, Deep Tan, or Tile ed Travatan, Arizona Tan, Deep Tan, or Black Travatan, Mission ed, or Tile ed Travatan, Omaha Tan, or Deep Tan Arizona Tan, Cape Cod Gray, or Black L i q u i d G r a n i t e i s a f u l l b r o a d c a s t o f C o l o r C h i p s a n d w i l l r e s e m b l e t h e f r o n t o f t h i s c h a r t. L i q u i d Te r r a z z o i s a l i g h t b r o a d c a s t o f C o l o r C h i p s a n d i s n o t s h o w n. B a s e C o l o r s a r e t a k e n f r o m t h e To p C o a t C o l o r C h a r t. P l e a s e c o n t a c t y o u r d i s t r i b u t o r o r a W e s t c o a t r e p r e s e n t a t i v e f o r d e t a i l e d L i q u i d G r a n i t e a n d L i q u i d Te r r a z z o a p p l i c a t i o n i n s t r u c t i o n s. C o l o r w i l l v a r y. T h i s c h a r t i s f o r r e f e r e n c e o n l y. P l e a s e r e q u e s t a n a c t u a l c o l o r s a m p l e a n d a p p l y s a m p l e o n s i t e b e f o r e b e g i n n i n g a n y p r o j e c t G a t e w a y C e n t e r D r i v e S a n D i e g o, C A Fa x w e s t c o a t. c o m T h e s e c o l o r s a r e a p p r o x i m a t e a n d w i l l v a r y. F O P O F E S S I O N A L U S E O N L Y 3/11

Advantages USDA Compliant Chemical Resistant 100% Solids High Build Seamless Easy Clean Up Durable Decorative Variety of Colors Unique Effects

Advantages USDA Compliant Chemical Resistant 100% Solids High Build Seamless Easy Clean Up Durable Decorative Variety of Colors Unique Effects Description Liquid Dazzle is a 100% solids epoxy floor coating system. There are proprietary metallic additives in EC-38 Liquid Dazzle Epoxy that create an evolving drift dynamic in this extraordinary

More information

Liquid Dazzle. Create brilliant metallic effects with Liquid. Dazzle, Westcoat s premier decorative. epoxy floor coating system.

Liquid Dazzle. Create brilliant metallic effects with Liquid. Dazzle, Westcoat s premier decorative. epoxy floor coating system. Liquid Dazzle Create brilliant metallic effects with Liquid Dazzle, Westcoat s premier decorative epoxy floor coating system. Engineered with proprietary metallic additives that uniquely flow when applied,

More information

Thin Film SYSTEM SPECIFICATION. Water-Based

Thin Film SYSTEM SPECIFICATION. Water-Based SYSTEM SPECIFICATION Thin Film Description Westcoat s Thin Film System is an epoxy floor coating which provides a thin build system that is tough, chemical resistant and durable. The WB Thin Film system

More information

Fast Stain. Enhance the color of concrete floors quickly. and easily with Westcoat Fast Stain - an. environmentally friendly, solvent soluble,

Fast Stain. Enhance the color of concrete floors quickly. and easily with Westcoat Fast Stain - an. environmentally friendly, solvent soluble, Fast Stain Enhance the color of concrete floors quickly and easily with Westcoat Fast Stain - an environmentally friendly, solvent soluble, deep-penetrating powdered dye. For use on interior concrete,

More information

Slurry Coat. Texture Coat ft2 per batch. Slurry Coat ft2 per batch

Slurry Coat. Texture Coat ft2 per batch. Slurry Coat ft2 per batch Description The System is a fiberlath reinforced deck system installed with a series of four or five separate waterproof acrylic applications and sealed with one of Westcoat s clear sealers. The gives

More information

TC Interior. Beautify your interior floor with TC Interior, a. line of systems specifically designed for the

TC Interior. Beautify your interior floor with TC Interior, a. line of systems specifically designed for the R R R TC Interior Beautify your interior floor with TC Interior, a line of systems specifically designed for the interior environment. Add style to any decor; choose either a smooth or slightly textured

More information

1 year 3 years N/A N/A

1 year 3 years N/A N/A Description Westcoat s system is a trowel applied, urethane cement mortar, that is commonly installed at a 1/4 inch thickness and can be installed with limited downtime. The Temper- Crete system features

More information

Fast Stain. Enhance the color of concrete floors quickly. and easily with Westcoat Fast Stain - an. environmentally friendly, solvent soluble,

Fast Stain. Enhance the color of concrete floors quickly. and easily with Westcoat Fast Stain - an. environmentally friendly, solvent soluble, Enhance the color of concrete floors quickly and easily with Westcoat - an environmentally friendly, solvent soluble, deep-penetrating powdered dye. For use on interior concrete, dries to the touch in

More information

Acid Stain. Create amazing rich finishes with Westcoat. Acid Stain. Made from an acid solution, wetting agents, and metallic ions, Acid

Acid Stain. Create amazing rich finishes with Westcoat. Acid Stain. Made from an acid solution, wetting agents, and metallic ions, Acid R R Acid Stain Create amazing rich finishes with Westcoat Acid Stain. Made from an acid solution, wetting agents, and metallic ions, Acid Stain penetrates and reacts with concrete and Westcoat s cement

More information

ALX. Experience unmatched strength, durability, and. design with ALX, Westcoat s waterproof deck. coating system. Formulated for plywood surfaces,

ALX. Experience unmatched strength, durability, and. design with ALX, Westcoat s waterproof deck. coating system. Formulated for plywood surfaces, ALX Experience unmatched strength, durability, and design with ALX, Westcoat s waterproof deck coating system. Formulated for plywood surfaces, the ALX system integrates the finest acrylic resins and cement

More information

STERI-FLAKE 470 HYBRID ESTER POLYMER, LIGHT-MEDIUM TRAFFIC, FLAKE FILLED FLOOR SYSTEM LOW ODOR MMA ALTERNATIVE FEATURES

STERI-FLAKE 470 HYBRID ESTER POLYMER, LIGHT-MEDIUM TRAFFIC, FLAKE FILLED FLOOR SYSTEM LOW ODOR MMA ALTERNATIVE FEATURES FEATURES Low Odor & VOC Very Fast Cure Unique Multi Colored Patterns Tough, Durable & Seamless Floor Good UV Stability Protects Substrate from Chemical or Physical Attack Integral Cove, Base and Curb (optional)

More information

Installation Instructions

Installation Instructions Installation Instructions I. GENERAL INFORMATION KEY CHIP-100 FLOORING is a decorative resin flooring system consisting of clear, 100% solids epoxy resin and colored vinyl chips. KEY CHIP-100 FLOORING

More information

HTG Concrete Seal. Technical Specifications. Safety. HMIS (Concentrate/RTU) Availability. Directions

HTG Concrete Seal. Technical Specifications. Safety. HMIS (Concentrate/RTU) Availability. Directions HTG Concrete Seal HTG(gray) Concrete Seal is a 2-part, high-solid epoxy resin formulation for extreme durability that dries gray. Use HTG to transform bare concrete or previously coated concrete floors

More information

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET Dy-Mark EPOXY COAT DIRECTIONS FOR USE Dy-Mark All-In-One Epoxy Coat is a durable floor coating that gives a professional finish to interior bare concrete floors. Epoxy Coat resists hot tyre pick-up and

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy Metallic System GUIDE SPECIFICATION SECTION 09725 PART 1 GENERAL

More information

Installation Instructions

Installation Instructions Installation Instructions KEY LASTIC CHIP 100 FLOORING I. GENERAL INFORMATION KEY LASTIC CHIP-100 FLOORING is a resilient decorative resin flooring system consisting of 100% solids resilient epoxy resins

More information

Installation Instructions

Installation Instructions Installation Instructions KEY MMA SLT QUARTZ I. GENERAL INFORMATION KEY MMA SLT QUARTZ is a rapid curing, 100% reactive, decorative methyl methacrylate (MMA) resin flooring system. Thickness ranges from

More information

Sanitile 945 SL PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. 100% solids epoxy

Sanitile 945 SL PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. 100% solids epoxy SELECTION & SPECIFICATION DATA Generic Type Description Features 100% solids epoxy Sanitile 945 SL is a 100% solids, high performance, epoxy coating designed for concrete. Sanitile 945 SL is a selfleveling

More information

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET Dy-Mark EPOXY COAT WATER-BASED DIRECTIONS FOR USE Dy-Mark All-In-One Epoxy Coat Water-Based is a fast dry floor coating that gives a professional finish to interior bare concrete floors. Epoxy Coat resists

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy-Shell 1000 Color System GUIDE SPECIFICATION SECTION 09725 PART 1

More information

A-9,250 Parking Structure Resurfacing Cement Look

A-9,250 Parking Structure Resurfacing Cement Look A-9,250 Page 1 A-9,250 Parking Structure Resurfacing Cement Look Description This specification includes the repair and resurfacing methods used when applying Americrete products over cracked, spalled,

More information

CARLISLE DECK COATING INSTALLATION OVER EXISTING POLYURETHANE COATINGS

CARLISLE DECK COATING INSTALLATION OVER EXISTING POLYURETHANE COATINGS CARLISLE DECK COATING INSTALLATION OVER EXISTING POLYURETHANE COATINGS 1. GENERAL A. When coating over existing coatings, Carlisle can not assume responsibility for the adhesion of the existing coating,

More information

Vapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring

Vapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring advanced moisture control, inc. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring 250 polished concrete slabs! Made in Southern California,

More information

POLYMER ALLOY 1000/1000SF HIGH SOLIDS, MULTI-FUNCTIONAL, SEMI-SELF LEVELING OR SEEDED EPOXY FLOOR TOPPING

POLYMER ALLOY 1000/1000SF HIGH SOLIDS, MULTI-FUNCTIONAL, SEMI-SELF LEVELING OR SEEDED EPOXY FLOOR TOPPING FEATURES Meets all VOC requirements Low Odor/Solvent Free Semi-self leveling to a high-gloss or satin finish at 20 mils USDA Compliant Stain resistant with good clean ability. Can be aggregate filled and

More information

ALX. Experience unmatched strength, durability, and. design with ALX, Westcoat s waterproof deck. coating system. Formulated for plywood surfaces,

ALX. Experience unmatched strength, durability, and. design with ALX, Westcoat s waterproof deck. coating system. Formulated for plywood surfaces, ALX Experience unmatched strength, durability, and design with ALX, Westcoat s waterproof deck coating system. Formulated for plywood surfaces, the ALX system integrates the finest acrylic resins and cement

More information

Industrial and Decorative Epoxy Coating Systems

Industrial and Decorative Epoxy Coating Systems The Euclid Chemical Company Industrial and Decorative State-of-the-Art Polymer Solutions Modern work environments demand durability, appearance and cost effective value in concrete floor coating systems.

More information

APPLICATION INSTRUCTIONS ECO-FAST 100% SOLIDS DECK COATING SYSTEMS

APPLICATION INSTRUCTIONS ECO-FAST 100% SOLIDS DECK COATING SYSTEMS APPLICATION INSTRUCTIONS ECO-FAST 100% SOLIDS DECK COATING SYSTEMS Carlisle Coatings & Waterproofing Incorporated (CCW) has prepared this application guide to assist applicators in the use of ECO-FAST

More information

1. CMP SPECIALTY PRODUCTS 210 calcium aluminate/portland cement based self-leveling underlayment and topping

1. CMP SPECIALTY PRODUCTS 210 calcium aluminate/portland cement based self-leveling underlayment and topping SECTION 09699 RECOMMENDED SPECIFICATION FOR CMP SPECIALTY PRODUCTS LOCKDOWN 100% SOLIDS, TWO COMPONENT, RESIN BASED, MEMBRANE FORMING, MOISTURE MITIGATION SYSTEM PART 1- GENERAL 1.01 RELATED DOCUMENTS

More information

Section SECTION RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS

Section SECTION RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 096723 - RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Colored Epoxies. Application Instructions. Typical Uses: Overview:

Colored Epoxies. Application Instructions. Typical Uses: Overview: Colored Epoxies Application Instructions Colored Epoxies manufactures high performance Architectural coatings in two part, clear and colored epoxies, that are a cost-effective solution for substrate protection.

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 863.967.1535 800.323.7357 fax: 863-965.2326 Seal-Krete High Performance Poly-Shell 7000 Color System GUIDE SPECIFICATION SECTION 09725 PART 1

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete Vapor-Shell GUIDE SPECIFICATION SECTION 09725 PART 1 GENERAL 1.01 SECTION INCLUDES A. Provisions

More information

Broadcast Parking Garage System

Broadcast Parking Garage System AIA Specification Part 1 General Broadcast Parking Garage System 1.01 Work Included A. All work to be provided in this section shall include material, labor, and equipment necessary to furnish the complete

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 863.967.1535 800.323.7357 fax: 863-965.2326 Seal-Krete High Performance Poly-Shell 7000 Single Quartz Broadcast System GUIDE SPECIFICATION SECTION

More information

1/16 Single Broadcast Polymer Flooring System

1/16 Single Broadcast Polymer Flooring System specification 1/16 Single Broadcast Polymer Flooring System Part 1 - GENERAL General Provisions A. Work to be covered by this section, under written specification or by drawing, shall comply with all provisions

More information

Installation Instructions

Installation Instructions Installation Instructions I. GENERAL INFORMATION KEY URECON SLT-HP Quartz URECON SLT-HP Quartz is a three component, self-leveling, urethane-modified cementitious topping broadcast with quartz aggregate

More information

>>> RESIDENTIAL AND COMMERCIAL ONE DAY FLOORS REPAIR > RESTORE > RENEW

>>> RESIDENTIAL AND COMMERCIAL ONE DAY FLOORS REPAIR > RESTORE > RENEW >>> RESIDENTIAL AND COMMERCIAL ONE DAY FLOORS REPAIR > RESTORE > RENEW WWW.APOLLOCONCRETECOATINGS.COM WWW.APOLLOCONCRETECOATINGS.COM ABOUT US Apollo Concrete Coatings, is a Division of Apollo Drywall &

More information

HIGH PERFORMANCE INDUSTRIAL FLOORING SYSTEMS. hp.seal-krete.com

HIGH PERFORMANCE INDUSTRIAL FLOORING SYSTEMS. hp.seal-krete.com HIGH PERFORMANCE INDUSTRIAL FLOORING SYSTEMS hp.seal-krete.com 800-323-7357 2 High Performance Industrial Flooring Systems Designed to Exceed your Expectations High performance flooring... helps provide

More information

OVERKOTE E-100 Epoxy Floor Coating Technical Data

OVERKOTE E-100 Epoxy Floor Coating Technical Data OVERKOTE E-100 Epoxy Floor Coating Technical Data PRODUCT DESCRIPTION OVERKOTE E-100 is a floor coating system applied at a thickness of 16 to 50 mils. It is designed for long term protection of concrete

More information

Finish Texture: A rough, anti-slip, or smooth finish can be created by varying the number and thickness of finish coats that are applied.

Finish Texture: A rough, anti-slip, or smooth finish can be created by varying the number and thickness of finish coats that are applied. The unique decorative pattern created by vinyl flakes provides a look reminiscent of granite/terrazzo at a fraction of the cost. Mr. Floor's Full Flake flooring system is a multi-step process consisting

More information

Product Guide: Primers

Product Guide: Primers Product Guide: Primers Product AM15 Water Based Epoxy Primer AM13 Fast Set Water Based Epoxy Primer AM144/154 High Performance Epoxy Coating AM77LVP High Build Epoxy Primer AM1LVP High Build Epoxy Primer

More information

1/4 Industrial Trowel System

1/4 Industrial Trowel System System Specification 1/4 Industrial Trowel System Revision Date: 6/2015 Printed Date: 6/2015 PART 1 GENERAL 1.01 RELATED DOCUMENTS Drawings and general provisions of contract including General and Special

More information

DESCRIPTION FEATURES AND BENEFITS AREAS OF USE. DiamondCoat Polyurethane Concrete Floor Finish is suitable for use in the following areas:

DESCRIPTION FEATURES AND BENEFITS AREAS OF USE. DiamondCoat Polyurethane Concrete Floor Finish is suitable for use in the following areas: Product Information Technical Data Sheet - August 2017 DiamondCoat Polyurethane Concrete Floor Finish Clear, highly durable and abrasion resistant, concrete floor coating. DESCRIPTION Crommelin DiamondCoat

More information

Signature Seal 100 Medium-to-High Sheen Sealer VOC Characteristics and Applications

Signature Seal 100 Medium-to-High Sheen Sealer VOC Characteristics and Applications Signature Seal 100 Medium-to-High Sheen Sealer - 100 VOC DESCRIPTION Legacy Signature Seal is a high-gloss, UV-resistant, lacquer-based, crystal-clear sealer. A light coating of Legacy Signature Seal will

More information

Seal- Krete High Performance System

Seal- Krete High Performance System hp.seal-krete.com Rust-Oleum - 11 Hawthorn Parkway, Vernon Hills, IL 800.323.7357 PART 1 GENERAL 1.01 SECTION INCLUDES Seal- Krete High Performance Poly- Shell 70007 System GUIDE SPECIFICATION SECTION

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 863.967.1535 800.323.7357 fax: 863-965.2326 Seal-Krete High Performance Poly-Shell 7000 Sparse Flake System GUIDE SPECIFICATION SECTION 09725

More information

FLOORING INSTALLATION SYSTEMS. Product Catalog

FLOORING INSTALLATION SYSTEMS. Product Catalog FLOORING INSTALLATION SYSTEMS Product Catalog Custom Building Products is North America s leader in flooring preparation systems. It s easy to say you re an industry leader, but we prove it every day with

More information

Flowfast Terrosso (2mm)

Flowfast Terrosso (2mm) Technical Profile Flowfast Terrosso (2mm) A seamless, rapid curing, decorative, durable MMA floor finish that transforms commercial and industrial environments. Typically used in public areas including

More information

Traffic Bearing Membrane

Traffic Bearing Membrane 7 07 18 11 Traffic Coatings Qualideck Traffic Bearing Membrane High-solids, 2-component polyurethane waterproofing, traffic bearing systems for vehicular and pedestrian areas PACKAGING Q152 Primer: 3 gal

More information

Low cost because floor renovation can be completed the same day

Low cost because floor renovation can be completed the same day ARDEX SD-L ARDEX SD-L Technical Information & Installation Instructions Product Info Formatted Specifications MSDS Find in this page: Technical Information Installation Instructions Technical Information

More information

MEMBRANE 510/510R Low VOC Flexibilized, Urethane Membrane mils

MEMBRANE 510/510R Low VOC Flexibilized, Urethane Membrane mils GREEN BUILDING FEATURES Contributes towards satisfying Credit 4.2 under LEED Contains recycled post industrial crushed glass Contains rapidly renewable materials Meets California South Coast Air Quality

More information

POLYMER ALLOY 2000/2000SF 100% SOLIDS, MULTI-FUNCTIONAL SEMI-SELF LEVELING OR SEEDED EPOXY FLOOR TOPPING

POLYMER ALLOY 2000/2000SF 100% SOLIDS, MULTI-FUNCTIONAL SEMI-SELF LEVELING OR SEEDED EPOXY FLOOR TOPPING FEATURES Meets all VOC Requirements Low Odor/Solvent Free Compliant USDA Compliant Semi-Self Leveling to a Hi-Gloss or Satin Finish at 20 Mils Stain Resistant with Good Cleanability. Can be Aggregate Filled

More information

Make your floor a unique artwork!

Make your floor a unique artwork! Make your floor a unique artwork! Content: Floor Expert EP 101... 08 Floor Expert EP 1013... 09 Floor Expert EP 310W... 10 Floor Expert EP 311...11 Floor Expert EP 211... 12 Floor Expert EP Combines design

More information

TECHNICAL DATA SHEET HYDROPOX #2 4:1 EPOXY (MPI #115)

TECHNICAL DATA SHEET HYDROPOX #2 4:1 EPOXY (MPI #115) TECHNICAL DATA SHEET HYDROPOX #2 4:1 EPOXY (MPI #115) DESCRIPTION: A two component water base epoxy amine coating that provides excellent adhesion, solvent resistance and abrasion resistance with water

More information

KOSTER AMERICAN CORPORATION

KOSTER AMERICAN CORPORATION Section 09699 PART 1 GENERAL Water Vapor Emission Control Systems 1.1 RELATED DOCUMENTS A. Drawings, documents, and general provisions of the Contract, including, but not necessarily limited to, General

More information

Florock Seamless Flooring Systems

Florock Seamless Flooring Systems Part 1: General Florock Seamless Flooring Systems Architectural Specification FloroQuartz BC Epoxy - Colored Quartz 1/8 (0.125 mm) Double Broadcast Flooring System 1.01 System Description A. Roller-applied

More information

The beautiful and durable solution great for a wide variety of applications.

The beautiful and durable solution great for a wide variety of applications. WWW.PENNTEKCOATINGS.COM >>> EVOLUTION SYSTEM AESTHETIC AND VERSATILE The beautiful and durable solution great for a wide variety of applications. Penntek s Evolution System provides a granite look with

More information

Florock Seamless Flooring Systems

Florock Seamless Flooring Systems Architectural Specification -- FloroCryl Shop MMA (Methyl Methacrylate) - Silica Sand Single Broadcast 1/16 (1.59 mm) Flooring System Part 1: General 1.01 System Description A. Roller-applied penetrating

More information

Advantages: Advantages include:

Advantages: Advantages include: Elgin, Illinois Hi-Tek Polymers Floor Description: Hi-Tek Polymers Floor is a decorative thin-set epoxy system of 1/4" (6,3mm) to 3/8 (MM) which meets all the standards set by the NTMA (National Terrazzo

More information

High Gloss Wet Look Lacquer

High Gloss Wet Look Lacquer PERFORMANCE Benefits is a solvent base, crystal clear, deep penetrating barrier coating that seals and protects against damage caused by water, salt, oil, grease, acid and food stains on concrete, block,

More information

EPOXY.COM System 315 Polymeric Chip Flooring

EPOXY.COM System 315 Polymeric Chip Flooring EPOXY.COM System 315 Polymeric Chip Flooring Floors have a special role to play in interior design. The heavy technical demands made on floors often make the use of certain decorative products simply impossible.

More information

GUIDE SPECIFICATION SECTION 07576

GUIDE SPECIFICATION SECTION 07576 GUIDE SPECIFICATION SECTION 07576 TRAFFIC DECK MEMBRANE SYSTEM NOTE TO ARCHITECTS & ENGINEERS: The Oak Ridge traffic membrane system provides for applied high build, durable and waterproof membrane consisting

More information

DIVISION 7 THERMAL AND MOISTURE PROTECTION Section Traffic Coatings

DIVISION 7 THERMAL AND MOISTURE PROTECTION Section Traffic Coatings Spec Component: SC-720-03/10 Sikalastic 720/745 Traffic System DIVISION 7 THERMAL AND MOISTURE PROTECTION Section 071800 Traffic Coatings Part 1 - General 1.01 Summary A. This specification describes the

More information

SECTION RESINOUS FLOORING PLEXIQUARTZ BROADCAST SKID-RESISTANT QUARTZ SYSTEM

SECTION RESINOUS FLOORING PLEXIQUARTZ BROADCAST SKID-RESISTANT QUARTZ SYSTEM SECTION 096723 RESINOUS FLOORING PLEXIQUARTZ BROADCAST SKID-RESISTANT QUARTZ SYSTEM PART 1 - GENERAL 1.1 SUMMARY A. This section includes the following: 1. Seamless epoxy flooring system, 1/16 th, 3/32

More information

Colors Available See Color Chart.

Colors Available See Color Chart. Purpose and Scope Instructions for the application of Dex-O-Tex Posi- Tred CR slip-retardant finish over various types of surfaces including concrete, metal, ceramic tile as well as certain Dex-O-Tex floors.

More information

STERI-QUARTZ B SOLVENT FREE, UV RESISTANT, LIGHT-MEDIUM TRAFFIC, DECORATIVE QUARTZ FLOOR SYSTEM, 1/16-3/16 GREEN BUILDING FEATURES

STERI-QUARTZ B SOLVENT FREE, UV RESISTANT, LIGHT-MEDIUM TRAFFIC, DECORATIVE QUARTZ FLOOR SYSTEM, 1/16-3/16 GREEN BUILDING FEATURES GREEN BUILDING FEATURES Dilute Inorganic Acids Oils * Steri-Quartz B contributes toward satisfying credit MR 5 and EQ 4.2 under LEED. Low emitting material Low VOC Low installation odor Processed and manufactured

More information

SECTION HYDRAULIC CEMENT UNDERLAYMENT

SECTION HYDRAULIC CEMENT UNDERLAYMENT ARDEX GUIDE SPECIFICATION ARDEX Underlayment HC 100 High-Capacity Self-Leveling and V1200 Self-Leveling Flooring Underlayment Cement-based Self-Leveling Underlayment for use with ARDEX ARDIFLO System SECTION

More information

Pacific Polymers Elasto-Deck 5000MR Guide Specification

Pacific Polymers Elasto-Deck 5000MR Guide Specification 1 071813-1 July 2018 Pacific Polymers Elasto-Deck 5000MR Guide Specification SECTION 071813 TRAFFIC COATINGS ELASTO-DECK 5000MR OVER CONCRETE 2 071813-2 July 2018 Pacific Polymers Elasto-Deck 5000MR Guide

More information

STERI-QUARTZ GP GENERAL PURPOSE BROADCAST, UV RESISTANT, LIGHT-MEDIUM DECORATIVE QUARTZ FLOOR SYSTEM, 1/16 3/16

STERI-QUARTZ GP GENERAL PURPOSE BROADCAST, UV RESISTANT, LIGHT-MEDIUM DECORATIVE QUARTZ FLOOR SYSTEM, 1/16 3/16 GREEN BUILDING FEATURES * Steri-Quartz GP contributes toward satisfying credit MR 5 and EQ 4.2 under LEED. Low emitting material Very Low VOC Low installation odor Processed and manufactured in Ohio APPLICATION

More information

TECHNICAL DATA SHEET HYDROPOX #4 QD 1:1 EPOXY WATERWHITE CLEAR

TECHNICAL DATA SHEET HYDROPOX #4 QD 1:1 EPOXY WATERWHITE CLEAR TECHNICAL DATA SHEET HYDROPOX #4 QD 1:1 EPOXY WATERWHITE CLEAR DESCRIPTION: A two component water base epoxy amine coating that provides excellent adhesion, solvent resistance and abrasion resistance with

More information

SECTION EPOXY TERRAZZO

SECTION EPOXY TERRAZZO SECTION 09402 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to

More information

Product Information. DiamondCoat Polyurethane Concrete Floor Finish Clear, high build, high abrasion resistant, decorative concrete floor coating

Product Information. DiamondCoat Polyurethane Concrete Floor Finish Clear, high build, high abrasion resistant, decorative concrete floor coating Product Information DiamondCoat Polyurethane Concrete Floor Finish Clear, high build, high abrasion resistant, decorative concrete floor coating Description Crommelin DiamondCoat Polyurethane Concrete

More information

Pacific Polymers Elasto-Deck 5000X2 Guide Specification

Pacific Polymers Elasto-Deck 5000X2 Guide Specification 1 071813-1 July 2018 Pacific Polymers Elasto-Deck 5000X2 Guide Specification SECTION 071813 TRAFFIC COATINGS ELASTO-DECK 5000X2 OVER CONCRETE 2 071813-2 July 2018 Pacific Polymers Elasto-Deck 5000X2 Guide

More information

What are Polyaspartics?

What are Polyaspartics? What are Polyaspartics? To begin with, a polyaspartic is a type of polyurea (actually a polyaspartic aliphatic polyurea). Polyurea as a commercially viable material was developed in the 1980s by Texaco

More information

FLEXMAR 3-Coat High-Build Colored Quartz System

FLEXMAR 3-Coat High-Build Colored Quartz System Guide Specification SECTION 09 67 23: HIGH-PERFORMANCE RESINOUS FLOORING FLEXMAR 3-Coat High-Build Colored Quartz System 20-27 mils DFT This guide specification is intended to assist the specifier in developing

More information

SECTION A. American Society for Testing and Materials (ASTM):

SECTION A. American Society for Testing and Materials (ASTM): hp.seal-krete.com 306 Gandy Rd., Auburndale, FL 33823-2723 800.323.7357 863.967.1535 fax:863-965.2326 Seal-Krete High Performance Epoxy-Shell WB 50 Product Specification GUIDE SPECIFICATION SECTION 09725

More information

Instruction Guide APPLICATION OF CIM TO CONCRETE

Instruction Guide APPLICATION OF CIM TO CONCRETE 23 Elm St., Peterborough, NH 03458 Tel: (800) 543-3458 (603) 924-9481 Fax: (603) 924-9482 Web site: Instruction Guide APPLICATION OF CIM TO CONCRETE 1.0 DESCRIPTION This guide covers the installation of

More information

ROLL ON ROCK INSTALLATION GUIDE SYSTEM 2 with 1/4 to 1 Flakes (See Roll on Rock System 2 Mini Flake Install Guide when using smaller size Flakes)

ROLL ON ROCK INSTALLATION GUIDE SYSTEM 2 with 1/4 to 1 Flakes (See Roll on Rock System 2 Mini Flake Install Guide when using smaller size Flakes) PRODUCT DESCRIPTION ROLL ON ROCK INSTALLATION GUIDE SYSTEM 2 with 1/4 to 1 Flakes (See Roll on Rock System 2 Mini Flake Install Guide when using smaller size Flakes) Roll On Rock System 2 IG Page 1 of

More information

PROTECTO-CRETE 800/800SF

PROTECTO-CRETE 800/800SF FEATURES Excellent Bond Strength to Concrete Excellent Wear Resistance RECOMMENDED APPLICATIONS Plating Room Floors Pickling Room Floors Truck Loading Platforms Chemical Storage CHEMICAL RESISTANCE Organic

More information

Florock Seamless Flooring Systems

Florock Seamless Flooring Systems Architectural Specification FloroCrete RT Rake/Trowel Urethane Mortar 3/16-1/4 (4.5-6.0 mm) Floor Resurfacing System Part 1: General 1.01 System Description A. System I Skid-Resistant Finish Resurfacing

More information

INSTALLATION MANUAL FULLY ADHERED INSTALLATIONS

INSTALLATION MANUAL FULLY ADHERED INSTALLATIONS SHOCKPAD BL41 MANUAL FULLY ADHERED S Manufactured in the U.S.A. by: Revised 07/08/2015 Supersedes all previous versions. Check website for updates. 866-795-2732 www.ecoreathletic.com 1 TABLE OF CONTENTS

More information

>>> RESIDENTIAL AND COMMERCIAL ONE DAY FLOORS REPAIR > RESTORE > RENEW

>>> RESIDENTIAL AND COMMERCIAL ONE DAY FLOORS REPAIR > RESTORE > RENEW >>> RESIDENTIAL AND COMMERCIAL ONE DAY FLOORS REPAIR > RESTORE > RENEW ABOUT US Our goal is to provide you with great service to match your protective coatings needs at a competitive price. With many years

More information

Flowfast Terrosso (3mm)

Flowfast Terrosso (3mm) Technical Profile Flowfast Terrosso (3mm) A seamless, hard-wearing, rapid curing, decorative, MMA floor finish that transforms commercial and industrial environments. Typically used in public areas including

More information

Thickness (dry film)... nominal 1/8 (3.2mm) to 1/4 (6.4mm) Colors Available See Standard Dex-O-Tex Color Chart with Chips (Standard White)

Thickness (dry film)... nominal 1/8 (3.2mm) to 1/4 (6.4mm) Colors Available See Standard Dex-O-Tex Color Chart with Chips (Standard White) Purpose and Scope To outline instructions for application of Dex-O-Tex Colorflake VP, a seamless, cosmetic polymeric deck covering system with random decorative chips for interior deck covering. This material

More information

Elastocoat Protective Coatings APPLICATION GUIDE

Elastocoat Protective Coatings APPLICATION GUIDE Elastocoat Protective Coatings DESCRIPTION Elastocoat polyurea and polyurethane coatings are two-component, 100% solids elastomer systems. The coatings systems are designed for processing through plural

More information

PROTECTO-CRETE 140T/140TSF

PROTECTO-CRETE 140T/140TSF FEATURES Low Odor VOC Compliant Can be used for Coving, Pitch and Curb Construction 100% Solids RECOMMENDED APPLICATIONS Pulp and Paper Mills Dike Areas Chemical Storage Pickling Room Floors Truck Unloading

More information

1. Rapid Set Cement. 2. Methods of preparation. 3. How to stage a job site. 4. Installation Mix, place, finish. 5. Coloring the TRU.

1. Rapid Set Cement. 2. Methods of preparation. 3. How to stage a job site. 4. Installation Mix, place, finish. 5. Coloring the TRU. 1. Rapid Set Cement 2. Methods of preparation 3. How to stage a job site 4. Installation Mix, place, finish 5. Coloring the TRU natural TRU Rapid Set is NOT Portland Cement Rapid Set is a Calcium Sulfoaluminate

More information

100% Solids, Multi Functional, Pigmented High Build Epoxy Novolac Coating, For Wall & Ceiling Applications mils

100% Solids, Multi Functional, Pigmented High Build Epoxy Novolac Coating, For Wall & Ceiling Applications mils GREEN BUILDING FEATURES * Steri-Coat P contributes toward satisfying credit MR 5 and EQ 4.2 under LEED. Low emitting material No volatile organic compounds Low installation odor Processed and manufactured

More information

STERI-SOFT HIGH FOOT TRAFFIC, ULTRAVIOLET RESISTANT, URETHANE RESILIENT FLOORING SYSTEM, 1/8 GREEN BUILDING FEATURES TYPICAL APPLICATIONS

STERI-SOFT HIGH FOOT TRAFFIC, ULTRAVIOLET RESISTANT, URETHANE RESILIENT FLOORING SYSTEM, 1/8 GREEN BUILDING FEATURES TYPICAL APPLICATIONS GREEN BUILDING FEATURES * Steri-Soft contributes toward satisfying credit EQ 4.2 under LEED. 100% Resilient Flooring Low emitting material Contains 27% post consumer recycled product Processed and manufactured

More information

Property Test Method Typical Value

Property Test Method Typical Value Application is a high gloss 100% solid, UV curing, permanent industrial floor coating intended for use on concrete floors. The Kemiko product range is cured using proprietary Quaker UV curing units. is

More information

Vulkem EWS with PUMA Technology (Heavy Duty) APPLICATION INSTRUCTIONS

Vulkem EWS with PUMA Technology (Heavy Duty) APPLICATION INSTRUCTIONS Vulkem EWS with PUMA Technology (Heavy Duty) APPLICATION INSTRUCTIONS 1. Purpose 1.1 The purpose of this document is to establish uniform procedures for applying the Vulkem Extreme Wearing System (EWS).

More information

A. This Section includes resinous flooring systems with epoxy body coat(s).

A. This Section includes resinous flooring systems with epoxy body coat(s). SECTION 096723 - RESINOUS FLOORING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes resinous flooring systems with epoxy body coat(s). 1. Application Method: Troweled (Slurry, Seeded or Broadcast

More information

SECTION HYDRAULIC CEMENT UNDERLAYMENT

SECTION HYDRAULIC CEMENT UNDERLAYMENT ARDEX GUIDE SPECIFICATION ARDEX V 1200 Self-Leveling Underlayment A Self-Leveling Underlayment that Consists of a Blend of Portland Cements, Other Hydraulic Cements and Polymers for Interior Applications

More information

RESINOUS FLOORING

RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS Bid #2017-17 A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this

More information

Purpose and Scope Instructions for the installation of Dex-O-Tex Cheminert CFS epoxy flooring over previously prepared surfaces.

Purpose and Scope Instructions for the installation of Dex-O-Tex Cheminert CFS epoxy flooring over previously prepared surfaces. Purpose and Scope Instructions for the installation of Dex-O-Tex Cheminert CFS epoxy flooring over previously prepared surfaces. Thickness... 3/16 (4.76 mm) minimum Colors Available Available in combinations

More information

ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish

ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish ARDEX GUIDE SPECIFICATION ARDEX SD-M Designer Floor Finish SECTION 03 01 30 MAINTENANCE OF CAST-IN-PLACE CONCRETE PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings, general provisions of the Contract,

More information

CERAM-KOTE COATINGS, INCORPORATED CERAM-KOTE and CERAM-FLOOR PRODUCTS APPLICATION TO CONCRETE SURFACES SPECIFICATION

CERAM-KOTE COATINGS, INCORPORATED CERAM-KOTE and CERAM-FLOOR PRODUCTS APPLICATION TO CONCRETE SURFACES SPECIFICATION Table of Contents: CERAM-KOTE COATINGS, INCORPORATED CERAM-KOTE and CERAM-FLOOR PRODUCTS APPLICATION TO CONCRETE SURFACES SPECIFICATION 1.0 Scope 2.0 General 3.0 Inspection 4.0 Surface Preparation 5.0

More information