Heat Shrink Technology

Transcription

1 Heat Shrink Technology

2 SG-Canusa A Global Success SG-Canusa provides electrical and mechanical insulation solutions for the Automotive, /Utility, Electronics and Communications markets. Founded in 1972, SG-Canusa has emerged to become one of the largest heat shrink manufacturers in the orld. Manufacturing & istribution Germany Poland Canada United States United Kingdom Research & evelopment Germany Canada Quality Assurance / Environmental Protection SG are committed to quality so all products are manufactured in accordance ith IN EN ISO 9001_2000, ISO-TS 16949_2002, IN EN ISO Copies of our certification are available upon request. ieses Produkt erfüllt die RoHS RoHS RoHS This product complies ith RoHS Restriction of Hazardous Substances Unique Solutions for Customer Applications SG-Canusa is the complete source for heat shrink products and related technology. Our product offering includes polyolefin, fluoropolymer, elastomer and PVC heat shrink based materials in thin, medium and heavy all tubing as ell as heat shrink accessories and equipment. Ne products are continuously being developed to meet industry requirements. Moreover, a commitment to develop unique solutions for customer applications has earned SG-Canusa a reputation for excellence in customer satisfaction. There s no end to hat e cover 3

3 Heat Shrink Technology EMAR Catalogue Heat Shrink Tubing Products Table of contents Single Wall Products ual Wall Products Medium/Heavy Wall Products Non Polyolefin Products Market Specific Products WELCOME TO SG-CANUSA HEAT SHRINK PROUCTS CATALOGUE PAGE 2-3 TABLE OF CONTENTS PAGE 4-5 PROUCT SELECTION CHART PAGE 6-9 INEX PAGE 10 TUBING SELECTION, PROCESSING AN ORERING INFORMATION PAGE 11 INTROUCTION SINGLE WALL PAGE ERAY -HB THIN WALL CROSSLINKE POLYOLEFIN, FLEXIBLE HEAT SHRINK TUBING FOR USE WITH AUTOMATIC FEE AN VARIOUS OTHER APPLICATIONS PAGE ERAY -LSB THIN WALL CROSSLINKE POLYOLEFIN, VERY FLEXIBLE, LOW SHRINK TEMPERATURE TUBING, IEAL FOR COVERING SENSITIVE ELECTRONIC COMPONENTS PAGE ERAY -H THIN WALL CROSSLINKE POLYOLEFIN, FLAME RETARANT MULTI-PURPOSE TUBING PAGE ERAY -I THIN WALL CROSSLINKE POLYOLEFIN, QUICK SHRINKING TUBE FOR MULTI-PURPOSE USE PAGE ERAY -ITW THIN WALL CROSSLINKE POLYOLEFIN, EXTRA THIN FOR SPACE SAVING APPLICATIONS PAGE ERAY -I 3000 THIN WALL CROSSLINKE POLYOLEFIN, FOR APPLICATIONS WHERE HIGH SHRINK RATIOS ARE REQUIRE PAGE ERAY -IGY THIN WALL CROSSLINKE POLYOLEFIN, GREEN-YELLOW STRIPE TUBE FOR ELECTRICAL PURPOSES WHICH REQUIRE A HIGH SHRINK RATIO PAGE CZT 200 THIN WALL CROSSLINKE POLYOLEFIN, ZERO HALOGEN HEAT SHRINK TUBING FOR USE IN CONTAINE AREAS PAGE CPX 876 THIN WALL CROSSLINKE POLYOLEFIN, HIGHLY FLAME RETARANT TUBING, UL 224 VW 1 PAGE PAGE INTROUCTION UAL WALL PAGE ERAY -IAKT 3:1, 4:1 THIN WALL AHESIVE-LINE CROSSLINKE POLYOLEFIN, 3:1, 4:1 SHRINK RATIO FOR GENERAL SEALING PURPOSES PAGE CPA 300 THIN WALL AHESIVE-LINE CROSSLINKE POLYOLEFIN, HIGH SPEC THIN WALL FLEXIBLE TUBING FOR GENERAL SEALING PURPOSES PAGE ERAY -IHKT THIN WALL AHESIVE-LINE CROSSLINKE POLYOLEFIN, HIGH TEMPERATURE RESISTANT, EMINENT STICKING AHESIVE PAGE CBK THIN WALL AHESIVE-LINE CROSSLINKE POLYOLEFIN, TUBING WITH 5:1 SHRINK RATIO FOR OBJECTS IFFICULT TO COVER PAGE INTROUCTION MEIUM/HEAVY WALL PAGE CFM MEIUM WALL CROSSLINKE POLYOLEFIN, TUBING SUITABLE FOR A VARIETY OF LOW VOLTAGE ELECTRICAL AN MECHANICAL APPLICATIONS PAGE CFW HEAVY WALL CROSSLINKE POLYOLEFIN, TUBING FOR INSULATING AN PROTECTING CABLE JOINTS AN TERMINATIONS PAGE CFTV MEIUM WALL AHESIVE-LINE CROSSLINKE POLYOLEFIN, FOR CATV INUSTRY SPLICE AN CONNECTOR PROTECTION PAGE CFHR HEAVY WALL CROSSLINKE POLYOLEFIN, HIGH RATIO TUBE FOR EXTREME IFFERENCES BETWEEN CABLE CONNECTORS AN BACKSHELLS PAGE INTROUCTION NON POLYOLEFIN PAGE CVN7 THIN WALL PVC SOFT, FLAME RETARANT TUBING PAGE ERAY -KY 175 THIN WALL CROSSLINKE PVF, HIGHLY FLAME RETARANT PAGE ERAY -KYF 190 THIN WALL CROSSLINKE PVF, HIGHLY FLAME RETARANT PAGE ERAY -V 25 THIN WALL CROSSLINKE ELASTOMER, FLEXIBLE, HIGH TEMPERATURE AN CHEMICAL RESISTANT TUBE FOR MILITARY PURPOSES PAGE ERAY -V 25 TW THIN WALL CROSSLINKE ELASTOMER, VERY FLEXIBLE, LONG TERM RESISTANCE TO IESEL, OIL AN HYRAULIC FLUIS AN CHEMICALS PAGE ERAY -VT 220 THIN WALL CROSSLINKE VITON, HIGHLY ABRASION RESISTANT, HIGH WITHSTAN TO CORROSIVE FLUIS IN EXTREME TEMPERATURES PAGE ERAY -PTFE THIN WALL CROSSLINKE TEFLON SEMI-RIGI TUBING FOR VERY HIGH TEMPERATURE AN CHEMCIAL RESISTANCE REQUIRING PURPOSES PAGE INTROUCTION MARKET SPECIFIC PROUCTS PAGE CCAP-RL MEIUM WALL SHRINKABLE CAPS FOR SEALING CABLE ENS PAGE CCB CROSSLINKE POLYOLEFIN CABLE BREAKOUT BOOTS PAGE CCBA & CCB-CON CROSSLINKE POLYOLEFIN CABLE BREAKOUT BOOTS, CONUCTIVE & ANTI-TRACK PAGE CEC CROSSLINKE POLYOLEFIN EN CAP FOR SEALING CABLE ENS PAGE CFSP CROSSLINKE POLYOLEFIN, AHESIVE-LINE, FOR PROTECTING FIBRE OPTIC SPLICES PAGE CGEL 596/711 GEL FILLE CLOSURE FOR PROTECTION OF COAXIAL ROP SPLICES IN BURIAL AN AERIAL APPLICATIONS PAGE CBTM MEIUM WALL CROSSLINKE POLYOLEFIN, FOR INSULATING BUS BARS UP TO 25 KV PAGE CBTH HEAVY WALL CROSSLINKE POLYOLEFIN, FOR INSULATING BUS BARS UP TO 36 KV PAGE ERAY -KSF HEAVY WALL CROSSLINKE POLYOLEFIN, FOR INSULATING BUS BARS UP TO 36KV PAGE CNTT MEIUM WALL CROSSLINKE POLYOLEFIN, ANTI-TRACK TUBING PAGE CRW AHESIVE-LINE WRAPAROUN SLEEVE FOR CABLE REPAIRS PAGE CRLS AHESIVE-LINE WRAPAROUN SLEEVE FOR CABLE REPAIRS PAGE LV KITS PAGE SIGNAL KITS PAGE MV TERMINATIONS PAGE MV JOINT KITS PAGE ERAY -AUTOMOTIVE WIRE HARNESS SOLUTIONS PAGE ERAY -AUTOMOTIVE PIPE & HOSE SOLUTIONS PAGE ERAY -AUTOMOTIVE SHRINK APPLIANCES PAGE ERAY -SETS, KITS, BOXES PAGE SG-CANUSA SUMMARY PAGE PAGE 4 5

4 PROUCT SELECTION CHART PROUCT SELECTION CHART Single Wall Tubing PROUCT NAME SHRINK RATIO ESCRIPTION OPERATING TEMPERATURE C MAX MIN TYPICAL APPLICATIONS ERAY -HB 2:1 Economical, General Purpose, Flexible Polyolefin Abrasion protection, insualtion of electrical or mechanical components 125 Non Flame Retardant - 1,2-50,8 Flexible, Halogen Free alternative to PVC ERAY -LSB 2:1 Very Lo Shrink Temperature, Flexible Polyolefin Thermally sensitive electronic components, High volume production lines 70 Non Flame Retardant - 3,2-25,4 Lo 80 C shrink temperature ERAY -H 2:1 Multipurpose tubing, Flexible Polyolefin Cable insulating, marking and bundling, mechanical protection 110 Flame Retardant (except clear) UL, CSA 1,2-50,8 Flexible, suitable for various applications ERAY -I 2:1 Multipurpose tubing, Flexible Polyolefin Insulation, corrosion and mechanical protection, bundling, marking, bending protection, strain relief 90 Flame Retardant (except clear) UL, CSA, MIL, VG, EF STAN, VE 1,2-101,6 Flexible, Flame Retardant, multiple specifications, 135 C operating temp ERAY -ITW 2:1 Ultra Thin Wall, Very Flexible Polyolefin Insulation & protection of splices in very flexible cables, High volume production lines 90 Clear: Non Flame Retardant, Black: Flame Retardant - 2,5-8,1 Very flexible, Ultra Thin ERAY -I :1 High, Flexible Polyolefin Insulation & protection of objects ith large diameter variations 90 Flame Retardant (except clear) UL, MIL, VG, EF STAN, VE 1,6-39,0 Flexible, High shrink ratio ERAY -IGY 3:1 Striped Green & Yello, High, Flexible Polyolefin Insulation & marking of earthing conductors 90 Flame Retardant EF STAN 3,2-39,0 Flexible, High shrink ratio Lo smoke generation for use in confined areas such as underground transportation systems, CZT 2:1 Zero Halogen, Flexible Polyolefin military & aerospace applications 115 Flame Retardant EF STAN 1,6-101,6 Zero Halogen Industrial, military, aerospace & automotive applications requiring lo recovery temperature & high CPX876 2:1 High Performance, Flexible Polyolefin flame retardancy 110 Highly Flame Retardant UL-VW1, CSA, MIL, EF STAN 1,2-101,6 Highly Flame Retardant, Multiple Spec. Approvals SHRINK TEMPERATURE C FLAME RATING SPECIFICATIONS SIZES mm FEATURES PAGE ual Wall Tubing PROUCT NAME SHRINK RATIO ESCRIPTION OPERATING TEMPERATURE C MAX MIN TYPICAL APPLICATIONS Ideal for effective moisture-resistant insulation of electrical connections, splices and Black: Flame Retardant, Clear: Non Flame Retardant ERAY -IAKT 3:1 3:1 High, Flexible Polyolefin, adhesive-lined 110* -55 other components 95 Adhesive: Non Flame Retardant - 3,0-40,0 Adhesive bonds to plastics, rubber, neoprene, steel and polyethylene Ideal for effective moisture-resistant insulation of electrical connections, splices and other Black: Flame Retardant, Clear: Non Flame Retardant ERAY -IAKT 4:1 4:1 Very High, Flexible Polyolefin, adhesive-lined 110* -55 components, very suitable for objects ith large diameter variation 95 Adhesive: Non Flame Retardant - 4,0-52,0 Ideal for coverage of irregularly shaped connectors and components Ideal for applications here both exceptional flame retardancy and environmental sealing CPA 300 3:1 High Spec. Flexible Polyolefin, adhesive-lined capabilities are required 120 Flame Retardant UL, MIL, CSA 3,2-39,9 Superior sealing against ater, moisture or other contaminants Offers reliable protection against short-circuits or malfunctions in electrical assembly components Black: Flame Retardant Specially designed polyamide adhesive protects components at higher ERAY -IHKT 4:1 Very High, Flexible Polyolefin, adhesive-lined 125* -55 and connections 100 Adhesive: Non Flame Retardant VG, VE 4,0-52,0 temperatures Black: Flame Retardant Easy assembly over large or irregularly shaped connectors, special CBK 4:1 Very High, Semi-rigid Polyolefin, adhesive-lined esigned to insulate and environmentally protect electronic ire harness assemblies 120 Adhesive: Non Flame Retardant - 6,0-18,0 adhesive flos readily on installation to fill voids *Outer Jacket SHRINK TEMPERATURE C FLAME RATING SPECIFICATIONS SIZES mm FEATURES PAGE Medium/Heavy Wall Tubing PROUCT NAME SHRINK RATIO ESCRIPTION OPERATING TEMPERATURE C MAX MIN TYPICAL APPLICATIONS High resistance against abrasion, corrosion, optional adhesive lined or CFM 3:1 Medium Wall Polyolefin, optionally adhesive-lined Splice, Termination & Cable Insulation, Mechanical Protection, Environmental Sealing 120 Non Flame Retardant - 10,2-228,6 sealant Rated for 600 V/ 90 C service, excellent insulating & mechanical CFW 3:1 Heavy Wall Polyolefin, optionally adhesive-lined Splice, Termination & Cable Applications including irect Burial, UR and Submersible 120 Non Flame Retardant UL, CSA 8,9-119,9 durability Cable TV & Communication Industries, aterproof sealing & mechanical protection for cable Excellent sealing & mechanical protection, easy installation & easy CFTV 3:1 Flexible Polyolefin, adhesive-lined, ith heat indicating lines connections 120 Non Flame Retardant - 10,2-69,8 reutilisation of the connection High ratio to accomodate extreme dimensional differences in connector CFHR 6:1 Very High, Flexible Polyolefin Support & Insulation of Military, Electronic & Transportation Wiring Applications 120 Non Flame Retardant - 19,0-119,4 & ire assemblies SHRINK TEMPERATURE C FLAME RATING SPECIFICATIONS SIZES mm FEATURES PAGE 6 7

5 PROUCT SELECTION CHART PROUCT SELECTION CHART Non Polyolefin Tubing PROUCT NAME SHRINK RATIO ESCRIPTION OPERATING TEMPERATURE C MAX MIN TYPICAL APPLICATIONS CVN7 2:1 Thin Wall Flexible PVC Insulation of busbars, connectors, terminals, protection against mechanical stress and corrosion 100 Flame Retardant UL, CSA, MIL 2,4-101,6 Favourable relation of price and quality UL-VW1, CSA, MIL, ERAY -KY 175 2:1 Modified semi rigid PVF Excellently suitable for applications here very high chemical and abrasion resistance are needed 175 Flame Retardant VG, EF STAN, VE, PAN 1,2-25,4 Highly flame retardant, High ithstand to abrasion and cut-through High flexible and abrasion resistance requiring applications. Very ell applicable for chemical ERAY -KYF 190 2:1 Modified flexible PVF resistance or high operating temperature requirements 175 Flame Retardant UL-VW1 1,2-12,7 Mechanically resistant, high operating temperature, very flexible ERAY -V 25 2:1 Modified very flexible Elastomer eveloped for rugged demands ith vie to high fuel, chemical and insulation requirements 180 Flame Retardant MIL, VG, EF STAN, VE, PAN 3,2-76,0 iesel, oil, hydraulic fluid resistant Mechanical, chemical, temperature protection of sensitive components in combination ith ERAY -V 25 TW 2:1 Modified very flexible thin alled Elastomer extreme flexibilty 170 Flame Retardant VG, VE 2,4-38,0 iesel, oil, hydraulic fluid resistant, very thinalled Severe chemical & thermal environments, high resistance to ERAY -VT 220 2:1 Flexible Viton esigned for applications here highest temperature resistance is required 175 Flame Retardant MIL, VG, EF STAN, VE, PAN 3,2-50,8 impact & abrasion ERAY -PTFE 4:1 4:1 Semi rigid Teflon Extremely suitable for insulating and protecting objects from thermal load and chemical influence 350 Flame Retardant - 1,98-31,75 Resistant to extremes of heat, shock, chemicals, abrasion AWG30 (0,86mm) - ERAY -PTFE AWG 2:1 Semi rigid Teflon Fits to the same kinds applications as PTFE 4:1, but the diameters are related to the AWG 350 Flame Retardant - AWG0 (11,94mm) Resistant to extremes of heat, shock, chemicals, abrasion SHRINK TEMPERATURE C FLAME RATING SPECIFICATIONS SIZES mm FEATURES PAGE Market Specific Products PROUCT NAME SHRINK RATIO ESCRIPTION OPERATING TEMPERATURE C MAX MIN TYPICAL APPLICATIONS 10,2-119,4 Superior resistance to eathering, moisture contamination and adverse CCAP-RL 3:1 PE End Caps Sealing of cables against moisture 120 Non Flame Retardant - (iameter) environmental conditions ,0-125,0 Shrink ratio accomodates a ide range of cables, also available as CCB various Cable breakouts PE Sealing of cable & conduit breakouts 135 Non Flame Retardant - (iameter) anti-track breakouts and conductive breakouts ,0-125,0 CCBA & CCB-Con various Anti-track medium voltage breakouts & Conductive breakouts Sealing of cable & conduit breakouts 135 Non Flame Retardant - (iameter) Adhesive liner provides complete protection and insulation ,0-148,0 CEC various PE End Caps Sealing of cables against moisture 120 Non Flame Retardant - (iameter) Unaffected by ultra-violet light, good chemical and solvent resistance ,0-61,0 eburred stainless steel reinforcing member ends. Preventing contact CFSP 3:1 Fiber Optic Splice Protection + Support Sleeve Protection of optical fiber splices 90 Non Flame Retardant - (Length) beteen fibre and backbone ,4-30,48 Tough outer shell, fully re-enterable gel polymer for complete aterproof CGEL 596/711 - Gel filled PE rop Cable Splice Enclosure Waterproof coaxial cable joint (iameter) protection ,0-228,6 CBTM 3:1 Medium all anti-track tube Insulation of medium voltage busbars up to 36 kv 120 Flame Retardant UL (iameter) Specifically designed anti track tubing for medium voltage applications ,9-167,6 CBTH 3:1 Heavy all anti-track tube Insulation of medium voltage busbars up to 36 kv 120 Flame Retardant UL (iameter) Specifically designed anti track tubing for medium voltage applications ,0-100,0 KSF >2:1 Heavy all anti-track tube Insulation of medium voltage busbars up to 36 kv 125 Flame Retardant - (iameter) Specifically designed anti track tubing for medium voltage applications ,0-70,0 CNTT >2:1 Medium all anti-track tube Insulation of medium voltage joints & terminations up to 36kV, in- and outdoor 120 Flame Retardant - (iameter) Exceptional electrical and eathering properties ,0-200,0 CRW various Railed Wraparound Sleeve Cable jacket repair & splicing applications 120 Non Flame Retardant - (iameter) Sleeve is closed ith a flexible stainless steel locking channel ,0-171,0 CRLS 3:1 RAIL-LESS Repair Sleeve Cable repair & splicing applications here tubing cannot be used 120 Non Flame Retardant - (iameter) RAIL-LESS Wraparound design for fast installation LV Kits - Individually to combine - - Jointing multi-core, polymeric insulated energy cables in the lo voltage range Quick, simple installation, Exceptionally good electrical insulation Signal Kits - Individually to combine - - Particularly suitable for connecting screened signal cables in industry, rail and mass transit Good mechanical load-bearing ability, No maintenance time necessary MV Joints & Suitable for terminations and joints up to 36 kv for XLPE, PVC, PILC and PE medium Terminations - Individually to combine - - voltage cables Good stress control properties, Exceptional insulation characteristics SHRINK TEMPERATURE C FLAME RATING SPECIFICATIONS SIZES mm FEATURES PAGE 8 9

6 Tubing Selection and Processing Information: Index PROUCT CBK CBTH CBTM CCAP-RL CCB CCBA / CCB-CON CEC CFHR CFM CFSP CFTV CFW CGEL 596/ PAGE The heat shrinkable tubing should be capable of shrinking to a size 20% smaller than the object to be covered. Cut the shrink tubing. Be sure to have a smooth cut edge. Slide the tubing over the object to be sealed. Shrink the tubing onto the object, starting at one end. Use a heating appliance for this process, e.g. a heat gun or a shrink tunnel. Optimal shrink temperature of the material is vital to assure a short shrink period. You can find the shrink temperature in the corresponding tables. In case of tubing ith an adhesive inner lining the adhesive layer may have a slight discharge at the end. Ensure even heat distribution to prevent overheating. Overheating the material during the shrink process may cause bubbles, discolouration, or damage to the tube. CNTT CPA CPX If you have any further questions, our application engineers ill be happy to assist you. CRW CRLS CVN CZT Ordering Information: ERAY -Automotive hose & pipe solutions ERAY -Automotive ire harness solutions For each item, please specify the product name plus each of the folloing options: ERAY -Sets, Kits, Boxes ERAY -Shrink appliances ERAY -H ERAY -HB ERAY -I ERAY -I ERAY -IAKT 3: ERAY -IAKT 4: ERAY -IGY ERAY -IHKT ERAY -ITW Size: See imensions chart in individual datasheet Colour Options*: See Colour chart in individual datasheet Total Quantity & Length Options: See imensions chart in individual datasheet Printing Options: printed, unprinted Adhesive lining Options**: lined, unlined * Please note that not all standard colours are stock items. Non-stock items require a minimum order quantity. SG-Canusa also offers predefined special colours, for hich the usual lead time is longer and the minimum order quantity generally higher than for standard colours. ** For those products available in to versions ERAY -KSF ERAY -KY Example: eray -HB, 1/2, black, mtr, 100 m-spool, unprinted ERAY -KYF ERAY -LSB ERAY -PTFE 4: ERAY -PTFE AWG For information on custom sizes and length-options please contact your customer service representative. ERAY -V ERAY -V 25 TW ERAY -VT LV Kits MV Joints & Terminations Signal Kits All information contained in this catalogue is believed to be reliable. We advise hoever that customers should separately evaluate the suitability of our products for their particular application. SG-Canusa and ShaCor Ltd. give no guarantees in respect of the accuracy or sufficiency of the information presented and disclaim any liability regarding its use. Our responsibilities are only those listed in our standard terms and conditions of sale for these products. In no instance ill e be liable for any eventual, indirect or consequential damage or damages arising from the sale, resale, transfer, use or misuse of the product. 11

7 Single Wall Products Single Wall heat shrinkable tubing is used in the electronics, automotive, military & aerospace sectors in a variety of applications, including: Mechanical Protection Abrasion Protection Strain Relief Moisture Protection Cable Insulation Marking & Bundling of electronic components 12 13

8 ERAY -HB Thin Wall Crosslinked Polyolefin Single Wall Non Flame retardant 2:1 eray -HB imensions EXPANE RECOVERE ELIVERY UNITS ERAY -HB Economical, non self-extinguishing, halogen free heat shrink tubing INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black Black & Clear Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 1,2 3/64 0,6 0, o 150 o - 1,6 1/16 0,8 0, o 150 o - 2,4 3/32 1,2 0, o 150 o - 3,2 1/8 1,6 0, o 150 o - 4,8 3/16 2,4 0, o 75 o - 6,4 1/4 3,2 0, o 75 o - 9,5 3/8 4,8 0, o 75 o** - 12,7 1/2 6,4 0, o 50-19,0 3/4 9,5 0, ,4 1 12,7 0, ,1 1 1/2 19,0 1, ,8 2 25,4 1, * o = airfilled or oval ** black only, other colours flattened = flattened Flexible Continuous Operating Temperature: -55 C to 105 C Shrink Temperature: 125 C Halogen free alternative to PVC Technical ata Tensile Strength IEC ,0 MPa Elongation IEC % Longitudinal Change ASTM % max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 0,95 g/cm 3 Elongation after Heat Aging (168 hrs at 150 C) IEC % Aging (168 hrs at 150 C) IEC MPa Elongation after Heat Shock (4 hrs at 200 C) IEC % Shock (4 hrs at 200 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Flammability FMVSS302 passed ielectric Strength VE 0303 Part 2 20 kv/mm Volume Resistivity VE 0303 Part Ω x cm Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good Water Absorption VE ,30% Special Colours black clear On Request Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: eray -HB 1/2" black, mtr., 100m-spool, unprinted 14 15

9 ERAY -LSB Thin Wall Crosslinked Polyolefin Single Wall Non Flame retardant 2:1 ERAY -LSB imensions EXPANE RECOVERE ELIVERY UNITS ERAY -LSB Lo shrink temperature tubing, ideal for covering sensitive electronic components INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black Black & Special colours Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 3,2 1/8 1,6 0, o 150 o - 4,8 3/16 2,4 0, o 75 o - 6,4 1/4 3,2 0, o 75 o - 9,5 3/8 4,8 0, o 75 o** - 12,7 1/2 6,4 0, o 50-16,0 5/8 8,0 0, ,0 3/4 9,5 0, ,4 1 12,7 0, * o = airfilled or oval ** black only, other colours flattened = flattened Flexible Ideal for high volume production lines Continuous Operating Temperature: -45 C to 125 C Shrink Temperature: 70 C Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM % max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,2 g/cm 3 Elongation after Heat Aging (168 hrs at 158 C) UL % Aging (168 hrs at 158 C) UL MPa Elongation after Heat Shock (4 hrs at 200 C) IEC % Shock (4 hrs at 200 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -45 C Flammability FMVSS302 passed ielectric Strength VE 0303 Part 2 25 kv/mm Volume Resistivity VE 0303 Part Ω x cm Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good Water Absorption VE ,20% black Special Colours On Request Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -LSB 1/2" black, mtr., 100m-spool, unprinted 16 17

10 ERAY -H Thin Wall Crosslinked Polyolefin Single Wall Flame retardant* *except clear 2:1 ERAY -H imensions EXPANE RECOVERE ELIVERY UNITS ERAY -H Flame retardant, multi-purpose heat shrink tubing INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black Black & Coloured Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 1,2 3/64 0,6 0, o 150 o 25 1,6 1/16 0,8 0, o 150 o 25 2,4 3/32 1,2 0, o 150 o 25 3,2 1/8 1,6 0, o 150 o 25 4,8 3/16 2,4 0, o 75 o 25 6,4 1/4 3,2 0, o 75 o 10 9,5 3/8 4,8 0, o 75 o** 10 12,7 1/2 6,4 0, o ,0 5/8 8,0 0, ,0 3/4 9,5 0, ,4 1 12,7 0, ,8 1 1/4 15,9 0, ,0 1 1/2 19,0 1, ,8 2 25,4 1, * o = airfilled or oval ** black only, other colours flattened = flattened Flexible Continuous Operating Temperature: -55 C to 135 C Shrink Temperature: 110 C Suitable for various applications Technical ata Property Test Method clear Tensile Strength IEC MPa 19MPa Elongation IEC % 530% Longitudinal Change ASTM ± 10% max. ± 10% max. Secant Modulus ASTM MPa max. 175 MPa max. Specific Gravity ASTM- 792, A-I 1,25 g/cm 3 1,00 g/cm 3 Elongation after Heat Aging (168 hrs at 158 C) UL % 490% Aging (168 hrs at 158 C) UL Mpa 18 MPa Elongation after Heat Shock (4 hrs at 200 C) IEC % 500% Shock (4 hrs at 200 C) IEC MPa 18 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C does not break at -55 C UL 224 () flame retardant Flammability FMVSS 302 (clear) passed Property ielectric Strength VE 0303 Part 2 24 kv/mm 26 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Property Test Method Test Method clear clear Corrosive Action ASTM Meth. A non-corrosive non-corrosive Copper Compatibility ASTM Meth. B non-corrosive non-corrosive Resistance good good Water Absorption VE ,15% 0,30% Special Colours black clear* red yello blue hite green On Request Printability Hot stamp Ink jet Offset very good good good *clear not UL or CSA listed Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -H 1/4" black, mtr., 300m-spool, unprinted 18 19

11 ERAY -I Thin Wall Crosslinked Polyolefin Single Wall Flame retardant* *except clear 2:1 ERAY -I imensions EXPANE RECOVERE ELIVERY UNITS ERAY -I Universal heat shrink tubing ith excellent physical and mechanical properties Flexible Flame Retardant Meets MIL - TL /5 class 1+2 Continuous Operating Temperature: -55 C to 135 C Shrink Temperature: 90 C INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) Black Black & Coloured Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 1,2 3/64 0,6 0, o 150 o 25 1,6 1/16 0,8 0, o 150 o 25 2,4 3/32 1,2 0, o 150 o 25 3,2 1/8 1,6 0, o 150 o 25 4,8 3/16 2,4 0, o 75 o 25 6,4 1/4 3,2 0, o 75 o 10 9,5 3/8 4,8 0, o 75 o** 10 12,7 1/2 6,4 0, o ,0 5/8 8,0 0, ,0 3/4 9,5 0, ,4 1 12,7 0, ,8 1 1/4 15,9 0, ,0 1 1/2 19,0 1, ,0 2 25,4 1, ,0 3 38,0 1, ,6 4 50,8 1, * o = airfilled or oval ** black only, other colours flattened = flattened Technical ata Property Test Method clear Tensile Strength IEC MPa 20 MPa Elongation IEC % 550% Longitudinal Change ASTM ± 5% max. ± 5% max. Secant Modulus ASTM MPa max. 175 MPa max. Specific Gravity ASTM- 792, A-I 1,3 g/cm 3 1,0 g/cm 3 Elongation after Heat Aging (168 hrs at 175 C) ASTM % 500% Aging (168 hrs at 175 C) ASTM Mpa 18 MPa Heat Shock (4 hrs at 250 C) ASTM No cracking or floing No cracking or floing Shock (4 hrs at 200 C) IEC MPa 19 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C does not break at -55 C UL 224 () flame retardant Flammability FMVSS 302 (clear) passed Property ielectric Strength VE 0303 Part 2 24 kv/mm 24 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Property Test Method Test Method clear clear Corrosive Action ASTM Meth. A non-corrosive non-corrosive Copper Compatibility ASTM Meth. B non-corrosive non-corrosive Resistance good good Water Absorption VE ,20% 0,20% Special Colours - On request black clear* red yello blue hite green bron orange grey violet Printability Hot stamp Ink jet Offset very good good good *clear not UL or CSA listed Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -I 1/2" black, mtr., 100m-spool, unprinted 20 21

12 ERAY -ITW Thin Wall Crosslinked Polyolefin Single Wall Flame retardant* *except clear 2:1 ERAY -ITW imensions EXPANE RECOVERE ELIVERY UNITS ERAY -ITW Ultra thin all, very flexible heat shrink tubing INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black & Clear Spool Length Style* mm IN mm mm m pcs. 2,5-0,8 0, o - 4,0-1,6 0, o - 5,6-2,4 0, o - 8,1-3,2 0, o - 11,0-4,8 0, o - 15,0-6,4 0, ,0-9,5 0, ,0-12,7 0, * o = airfilled or oval = flattened Lengths 1.22 m Ultra thin all Very flexible Flame retardant Continuous Operating Temperature: -55 C to 135 C Shrink Temperature: 90 C Technical ata Property Test Method clear Tensile Strength IEC MPa 20 MPa Elongation IEC % 550% Longitudinal Change ASTM ± 10% max. ± 10% max. Secant Modulus ASTM MPa max. 175 MPa max. Specific Gravity ASTM- 792, A-I 1,3 g/cm 3 1,0 g/cm 3 Elongation after Heat Aging (168 hrs at 175 C) ASTM % 500% Aging (168 hrs at 175 C) ASTM MPa 18 MPa Elongation after Heat Shock (4 hrs at 200 C) IEC % 530% Shock (4 hrs at 200 C) IEC MPa 19 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C does not break at -55 C UL 224 () flame retardant Flammability FMVSS 302 (clear) passed Property ielectric Strength VE 0303 Part 2 24 kv/mm 24 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Property Test Method Test Method clear clear Corrosive Action ASTM Meth. A non-corrosive non-corrosive Copper Compatibility ASTM Meth. B non-corrosive non-corrosive Resistance good good Water Absorption VE ,20% 0,20% clear Special Colours - On Request black Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -ITW 8,1mm clear, mtr., 150m-spool, unprinted 22 23

13 ERAY -I 3000 Thin Wall Crosslinked Polyolefin Single Wall Flame retardant* *except clear 3:1 ERAY -I 3000 imensions EXPANE RECOVERE ELIVERY UNITS ERAY - I 3000 High shrink ratio, flexible heat shrink tubing INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black Black & Coloured Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 1,6 1/16 0,5 0, o 150 o 25 3,2 1/8 1,0 0, o 150 o 25 4,8 3/16 1,5 0, o 75 o 25 6,4 1/4 2,0 0, o 75 o 10 9,5 3/8 3,0 0, o 75 o 10 12,7 1/2 4,0 0, o ,0 3/4 6,0 0, ,4 1 8,0 1, ,0 1 1/2 13,0 1, * o = airfilled or oval = flattened Flexible High Flame retardant Resistant to common fluids and solvents Meets MIL-TL-23053/5 class 1+2 Continuous Operating Temperature: -55 C to 135 C Shrink Temperature: 90 C Technical ata Property Test Method clear Tensile Strength IEC MPa 20 MPa Elongation IEC % 550% Longitudinal Change ASTM ± 10% max. ± 10% max. Secant Modulus ASTM MPa max. 175 MPa max. Specific Gravity ASTM- 792, A-I 1,3 g/cm 3 1,0 g/cm 3 Elongation after Heat Aging (168 hrs at 175 C) ASTM % 500% Aging (168 hrs at 175 C) ASTM Mpa 18 Mpa Elongation after Heat Shock (4 hrs at 250 C) ASTM No cracking or floing No cracking or floing Shock (4 hrs at 200 C) IEC MPa 19 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C does not break at -55 C UL 224 () flame retardant Flammability FMVSS 302 (clear) passed Special Colours - On Request black clear* red yello blue hite bron orange green violet grey *clear not UL or CSA listed Property ielectric Strength VE 0303 Part 2 24 kv/mm 24 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Property Test Method Test Method clear clear Corrosive Action ASTM Meth. A non-corrosive non-corrosive Copper Compatibility ASTM Meth. B non-corrosive non-corrosive Resistance good good Water Absorption VE ,20% 0,20% Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -I /2 black, mtr., 300m-spool, unprinted 24 25

14 ERAY -IGY Thin Wall Crosslinked Polyolefin Single Wall Flame retardant 3:1 ERAY -IGY imensions EXPANE RECOVERE ELIVERY UNITS ERAY -IGY ual colour, flexible, non-meltable, quick shrinking heat shrink tubing ith a high shrink ratio INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Green-Yello Spool Length Style* mm IN mm mm m pcs. 3,2 1/8 1,0 0, o 25 4,8 3/16 1,5 0,60 75 o 25 6,4 1/4 2,0 0,65 75 o 10 9,5 3/8 3,0 0, ,7 1/2 4,0 0, ,0 3/4 6,0 0, ,4 1 8,0 1, ,0 1 1/2 13,0 1, * o = airfilled or oval = flattened Lengths 1.22 m Flexible High shrink ratio Flame retardant Resistant to common fluids and solvents Continuous Operating Temperature: -55 C to 135 C Shrink Temperature: 90 C Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM ± 10% max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,3 g/cm 3 Elongation after Heat Aging (168 hrs at 175 C) UL % Aging (168 hrs at 175 C) UL Mpa Elongation after Heat Shock (4 hrs at 200 C) IEC % Shock (4 hrs at 200 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Flammability UL 224 flame retardant ielectric Strength VE 0303 Part 2 24 kv/mm Volume Resistivity VE 0303 Part Ω x cm Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good Water Absorption VE ,20% green-yello Special Colours Not Available Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -IGY 19/6 green-yello, 300 mtr., 30m-spool, unprinted 26 27

15 CZT 200 Thin Wall Crosslinked Polyolefin Single Wall Flame retardant 2:1 CZT 200 imensions EXPANE RECOVERE ELIVERY UNITS CZT 200 Zero halogen, flexible heat shrink tubing Flexible Zero halogen Flame retardant Lo smoke generation if burning Recommended for use ith zero halogen ires & cables Meets EF STAN 59-97, issue 3, type 8 Continuous Operating Temperature: -40 C to 105 C Shrink Temperature: 115 C INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) Black Black & Coloured Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 1,6 1/16 0,8 0, o 150 o - 2,4 3/32 1,2 0, o 150 o - 3,2 1/8 1,6 0, o 150 o - 4,8 3/16 2,4 0, o 75 o - 6,4 1/4 3,2 0, o 75 o - 9,5 3/8 4,8 0, o 75 o** - 12,7 1/2 6,4 0, o 50-16,0 5/8 8,0 0, ,0 3/4 9,5 0, ,4 1 12,7 0, ,8 1 1/4 16,0 0, ,0 1 1/2 19,0 1, ,0 2 25,4 1, ,0 3 38,0 1, ,6 4 50,8 1, * o = airfilled or oval ** black only, other colours flattened = flattened Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM ± 10% max. Secant Modulus ASTM MPa max. Specific Gravity ISO/R ,45 g/cm 3 Elongation after Heat Aging (168 hrs at 158 C) ISO % Elongation after Heat Shock (4 hrs at 150 C) ASTM % min. Lo Temperature Flexibility ASTM Meth. C does not break at -40 C Flammability ASTM- 635 flame retardant ielectric Strength IEC kv/mm Volume Resistivity ASTM Ω x cm Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good to excellent Water Absorption ASTM ,20% Special Colours Printability Hot stamp Ink jet Offset black hite yello On Request good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: CZT 200 1/2" black, mtr., 100m-spool, unprinted 28 29

16 CPX 876 Thin Wall Crosslinked Polyolefin Single Wall Flame retardant 2:1 CPX 876 imensions EXPANE RECOVERE ELIVERY UNITS CPX 876 Flexible, highly flame retardant heat shrink tubing Highly flame retardant, UL-224 VW-1 & CSA OFT Flexible Resistant to common fluids and solvents Continuous Operating Temperature: -55 C to 135 C Shrink Temperature: 110 C Meets MIL-TL-23053/5, class 3 INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) Black Black & Coloured Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm m m pcs. 1,2 3/64 0,6 0, o 150 o - 1,6 1/16 0,8 0, o 150 o - 2,4 3/32 1,2 0, o 150 o - 3,2 1/8 1,6 0, o 150 o - 4,8 3/16 2,4 0, o 75 o - 6,4 1/4 3,2 0, o 75 o - 9,5 3/8 4,8 0, o 75-12,7 1/2 6,4 0, o 50-16,0 5/8 8,0 0, ,0 3/4 9,5 0, ,4 1 12,7 0, ,8 1 1/4 15,9 0, ,0 1 1/2 19,0 1, ,0 2 25,4 1, ,0 3 38,0 1, ,6 4 50,8 1, * o = airfilled or oval = flattened Technical ata Tensile Strength ISO MPa Elongation ISO % Longitudinal Change ASTM ± 5% max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,4 g/cm 3 Elongation after Heat Aging (168 hrs at 175 C) ISO % Elongation after Heat Shock no dripping, floing or (4 hrs at 250 C) ASTM ripping Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Flammability UL 224, VW-1 flame retardant ielectric Strength IEC kv/mm Volume Resistivity ASTM Ω x cm Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good to excellent Water Absorption ASTM ,50% Special Colours - On request black red blue hite yello bron green orange grey violet Printability Hot stamp Ink jet Offset good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: CPX876 3/8" black, mtr., 150m-spool, unprinted 30 31

17 ual Wall Products SG-Canusa offers a ide range of dual all products. The available combinations of jacket materials and adhesives allo the customer to choose just the right tubing for the application and environmental conditions

18 ERAY -IAKT 3:1 & 4:1 Thin Wall Adhesive-Lined Crosslinked Polyolefin ual Wall Flame retardant* (outer jacket) *except clear 3:1& 4:1 ERAY -IAKT 3:1& 4:1 imensions 3:1 EXPANE RECOVERE ELIVERY UNITS ERAY -IAKT Adhesive-lined heat shrink tubing ideal for effective moisture-resistant insulation Flexible High shrink ratio Adhesive bonds to plastics, rubber, neoprene, steel polyethylene and many other materials Continuous Operating Temperature: -55 C to 110 C* Shrink Temperature: 95 C *Outer Jacket INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS OVERALL (NOM) WALL THICKNESS AHESIVE (NOM) Black Black & Clear Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm mm m m pcs. 3,0-1,0 1,00 0, o 150 o 25 4,5-1,5 1,10 0, o 75 o 25 6,0-2,0 1,20 0, o 75 o 10 9,0-3,0 1,40 0, o 75 o 10 12,0-4,0 1,70 0, o 50 o 10 19,0-6,0 2,10 0,60 50 o 30 o 10 24,0-8,0 2,40 0,70 50 o 30 o 10 40,0-13,0 2,40 0,70 30 o Small coils on request imensions 4:1 EXPANE RECOVERE ELIVERY UNITS INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS OVERALL (NOM) WALL THICKNESS AHESIVE (NOM) Black Black & Clear Lengths Spool Length Style* Spool Length Style* 1.22 m mm IN mm mm mm m m pcs. 4,0-1,0 1,00 0, o 150 o 25 8,0-2,0 1,20 0, o 75 o 10 12,0-3,0 1,40 0, o 50 o 10 16,0-4,0 1,70 0,60 50 o ,0-6,0 2,10 0,60 50 o 30 o 10 32,0-8,0 2,40 0,70 50 o 30 o 10 52,0-13,0 2,40 0,70 30 o * o = airfilled or oval = flattened Small coils on request Technical ata Property Test Method clear Tensile Strength IEC ,0 MPa 17,0 MPa Elongation IEC % 450% Longitudinal Change 3:1 ASTM % max. -15% max. Longitudinal Change 4:1 ASTM % max. -18% max. Specific Gravity ASTM- 792, A-I 1,25 g/cm 3 1,00 g/cm 3 Elongation after Heat Aging (168 hrs at 150 C) IEC % 360% Aging (168 hrs at 150 C) IEC MPa 15 MPa Elongation after Heat Shock (4 hrs at 200 C) IEC % 380% Shock (4 hrs at 200 C) IEC MPa 16 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C does not break at -55 C ASTM- 876 () flame retardant jacket Flammability FMVSS 302 (clear) passed Property Test Method clear ielectric Strength VE 0303 Part 2 22 kv/mm 23 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Property Test Method clear Corrosive Action ASTM Meth. A non-corrosive non-corrosive Copper Compatibility ASTM Meth. B non-corrosive non-corrosive Resistance good good Water Absorption VE ,15% 0,17% Special Colours black clear On Request Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -IAKT 3:1 12,0 mm black, mtr., 100m-spool, unprinted 34 35

19 CPA 300 Thin Wall Adhesive-Lined Crosslinked Polyolefin ual Wall Flame retardant 3:1 CPA 300 imensions EXPANE RECOVERE ELIVERY UNITS CPA 300 Adhesive-lined heat shrink tubing ideal for applications here both exceptional flame retardancy and environmental sealing capabilities are required INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) WALL THICKNESS AHESIVE (NOM) mm IN mm mm m pcs. 3,2 1/8 1,0 1,00 0, ,8 3/16 1,5 1,00 0, ,4 1/4 2,0 1,00 0, ,9 5/16 2,5 1,30 0, ,5 3/8 3,2 1,50 0, ,7 1/2 4,1 1,80 0, ,1 3/4 7,5 1,80 0, ,4* 1 8,1 2,50 1, ,8* 1 1/4 10,6 2,50 1, ,9* 1 1/2 13,0 2,50 1,00 20 * These sizes are not UL listed, Rolled commodities on request Lengths 1.22 m Flame retardant Superior sealing against ater, moisture or other contaminants Meets MIL - TL /4 Class 3 Continuous Operating Temperature: -55 C to 125 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM ,4 MPa Elongation ASTM % Longitudinal Change ASTM % to -5% max. Specific Gravity MIL-TL-23053/4 1,22 g/cm 3 Heat Resistant Properties no cracking, floing or (168 hrs at 175 C) MIL-TL-23053/4 dripping of outer all Heat Shock no cracking, floing or (4 hrs at 250 C) MIL-TL-23053/4 dripping of outer all Flammability ASTM flame retardant ielectric Strength ASTM kv/mm Volume Resistivity ASTM Ω x cm Corrosive Action MIL-TL-23053/4 non-corrosive Copper Compatibility MIL-TL-23053/4 non-corrosive Resistance good to excellent Water Absorption ASTM ,20% Special Colours black hite** red** On Request ** hite and red products are not UL listed Printability Hot stamp Ink jet Offset good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: CPA 300, 1/4", black, 244 mtr, 1,22 mtr.-lengths, unprinted 36 37

20 ERAY -IHKT Thin Wall Adhesive-Lined Crosslinked Polyolefin ual Wall Flame retardant* (outer jacket) *except clear 4:1 ERAY -IHKT imensions EXPANE RECOVERE ELIVERY UNITS ERAY -IHKT Flexible heat shrink tubing ith a temperature resistant polyamide adhesive inner lining INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS OVERALL (NOM) WALL THICKNESS AHESIVE (NOM) Black Spool Length Style* Lengths 1.22 m mm IN mm mm mm m pcs. 4,0-1,0 1,00 0, o 25 8,0-2,0 1,20 0, o 10 12,0-3,0 1,40 0, o 10 16,0-4,0 1,70 0,60 50 o 10 24,0-6,0 2,10 0,60 50 o 10 32,0-8,0 2,40 0,70 50 o 10 52,0-13,0 2,40 0,70 30 o 10 * o = airfilled or oval = flattened Flexible Very high shrink ratio Specially designed polyamide adhesive protects components at higher temperatures Superior sealing against ater or other contaminants Continuous Operating Temperature: -55 C to 125 C* Shrink Temperature: 100 C *Outer Jacket Technical ata Property Test Method clear Tensile Strength IEC ,0 MPa 19,0 MPa Elongation IEC % 500% Longitudinal Change ASTM % max. -18% max. Specific Gravity ASTM- 792, A-I 1,25 g/cm 3 1,00 g/cm 3 Elongation after Heat Aging (168 hrs at 160 C) IEC % 450% Aging (168 hrs at 160 C) IEC MPa 16 MPa Elongation after Heat Shock (4 hrs at 210 C) IEC % 450% Shock (4 hrs at 210 C) IEC MPa 16 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C does not break at -55 C ASTM- 876 flame retardant jacket Flammability FMVSS 302 passed black Special Colours Clear Property Test Method clear ielectric Strength VE 0303 Part 2 16 kv/mm 18 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance very good Water Absorption VE ,10% Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -IHKT 24,0 mm black, 500 mtr., 50m-spool, unprinted 38 39

21 CBK Thin Wall Adhesive-Lined Crosslinked Polyolefin ual Wall Flame retardant* (outer jacket) *except clear 5:1 CBK imensions EXPANE RECOVERE ELIVERY UNITS CBK esigned to environmentally seal electronic ire harness assemblies INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS OVERALL (NOM) WALL THICKNESS AHESIVE (NOM) Black &Clear Spool Length Style* mm IN mm mm mm m pcs. 6,0-1,4 1,35 0, o - 8,0-1,6 1,75 0, o - 12,0-2,5 2,00 1, o - 18,0-3,7 2,60 1,50 50 o - * o = airfilled or oval = flattened Lengths 1.22 m Very high shrink ratio Special adhesive flos readily during installation to fill voids Resistant to acids, alkalis and gasoline Continuous Operating Temperature: -55 C to 125 C Shrink Temperature: 120 C Technical ata Property Test Method clear Tensile Strength IEC ,0 MPa 15,0 MPa Elongation IEC % 400% Longitudinal Change ASTM ± 10% max. ± 10% max. Specific Gravity ASTM- 792, A-I 1,25 g/cm 3 1,20 g/cm 3 Elongation after Heat Aging (168 hrs at 160 C) IEC % 400% Aging (168 hrs at 160 C) IEC MPa 14 MPa Elongation after Heat Shock (4 hrs at 210 C) IEC % 370% Shock (4 hrs at 210 C) IEC MPa 15 MPa Lo Temperature Flexibility ASTM Meth. C does not break at -30 C does not break at -30 C ASTM- 876 () flame retardant jacket Flammability FMVSS 302 (clear) passed Property ielectric Strength VE 0303 Part 2 18 kv/mm 20 kv/mm Volume Resistivity VE 0303 Part Ω x cm Ω x cm Property Test Method Test Method clear clear Corrosive Action ASTM Meth. A non-corrosive non-corrosive Copper Compatibility ASTM Meth. B non-corrosive non-corrosive Resistance very good very good Water Absorption VE ,50% 0,50% Special Colours black clear On Request Printability Hot stamp Ink jet Offset very good - good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: CBK 12,0mm black, mtr., 100m-spool 40 41

22 Medium & Heavy Wall Products Medium Wall and Heavy Wall heat shrinkable tubing possesses excellent insulating, environmental sealing, and impact and abrasion resistance. Medium Wall & Heavy Wall tubing is used in a variety of general purpose applications to seal and protect electrical connections and terminations and provide excellent mechanical protection. SG-Canusa s line of specially designed medium & heavy all products are used as the industry standard in several markets including /Utility and Mass Transportation

23 CFM Medium Wall Crosslinked Polyolefin Medium & Heavy Wall Non Flame retardant 3:1 CFM imensions ORER REF. NO. EXPANE RECOVERE ELIVERY UNITS CFM Medium all heat shrinkable tubing suitable for a variety of lo voltage electrical and mechanical applications, here lighter eight and greater flexibility are important INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) mm IN mm mm pcs ,2-3,8 2, ,1-5,6 2, ,0-8,0 2, ,9-10,2 2, ,0-10,2 2, ,1-12,7 2, ,2-12,7 2, ,1-19,1 2, ,9-25,4 2, ,9-30,0 2, ,4-39,9 2, ,0-48,0 2, ,2-58,4 2, ,6-77,0 3,00 5 Lengths 1.22 m Seals and protects cable splices and terminations High resistance to impact and abrasion Optional thermoplastic adhesive liner for complete environmental protection and insulation Continuous Operating Technical ata Tensile Strength ASTM- 412, ISO 37 14,5 MPa Elongation ASTM- 412, ISO % Longitudinal Change ASTM % to -10% max. Specific Gravity ASTM- 792, A-I 1,10 g/cm 3 max. Elongation after Heat Aging (168 hrs at 150 C) ASTM- 2671, ISO % Elongation after Heat Shock (4 hrs at 225 C) ASTM No cracking or floing Lo Temperature Flexibility ASTM Meth. C does not break at -55 C ielectric Strength ASTM- 149 / IEC kv/mm Volume Resistivity ASTM Ω x cm Copper Corrosion ASTM No Corrosion Resistance good to excellent Water Absorption ASTM ,10% Temperature: -55 C to 110 C Shrink Temperature: 120 C Adhesive Property Test Method Adhesive Sealant black Special Colours Not Available Water Absorption - <0,3% <0,1% Softening Point ASTM-E C to 105 C 80 C to 90 C This product is also available ith sealant. For further information please contact our customer service. Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Lining Options For example: CFM 1500 black, 200 pcs., 1,22 mtr lengths, lined 44 45

24 CFW Heavy Wall Crosslinked Polyolefin Medium & Heavy Wall Non Flame retardant 3:1 CFW imensions ORER REF. NO. EXPANE RECOVERE ELIVERY UNITS CFW Heavy all heat shrinkable tubing provides maximum reliability for insulating and protecting cable joints and terminations INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) mm IN mm mm pcs ,9-3 1, ,0-4,1 2, ,1-6,1 2, ,9-8,9 3, ,1-11,9 4, ,8-16 4, ,1-22,1 4, * 89,9-30,0 4, * 119,9-39,9 4,30 5 *CFW 3500 and CFW 4700 are not UL or CSA listed Lengths 1.22 m Technical ata Withstands severe mechanical requirements of U.R.., submersible and direct burial installations Rated for 600V, 90 C continuous use Optional thermoplastic adhesive liner for complete environmental protection and insulation Continuous Operating Temperature: -55 C to 110 C Shrink Temperature: 120 C Tensile Strength ASTM- 412, ISO 37 14,5 MPa Elongation ASTM- 412, ISO % Longitudinal Change ASTM % to -10% max. Specific Gravity ASTM- 792, A-I 1,10 g/cm 3 Elongation after Heat Aging (168 hrs at 150 C) ASTM- 2671, ISO % Elongation after Heat Shock (4 hrs at 225 C) ASTM No cracking or floing Lo Temperature Flexibility ASTM Meth. C does not break at -55 C black Special Colours Not Available ielectric Strength ASTM kv/mm Volume Resistivity ASTM Ω x cm Copper Corrosion ASTM No Corrosion Resistance good to excellent Water Absorption ASTM ,10% Adhesive Property Test Method Adhesive Sealant Water Absorption - <0,3% <0,1% Softening Point ASTM-E C to 105 C 80 C to 90 C This product is also available ith sealant. For further information please contact our customer service. Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Lining Options For example: CFW 0750 black, 350 pcs., 1,22 mtr lengths, unlined 46 47

25 CFTV Medium Wall Adhesive-Lined Crosslinked Polyolefin Medium & Heavy Wall Non Flame retardant 3:1 CFTV imensions ORER REF. NO. EXPANE RECOVERE ELIVERY UNITS CFTV Heat shrinkable tubing and adhesive liner combination that established the CATV industry standard for splice and connector protection INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) mm IN mm mm pcs ,2-3,8 2, ,0-5,6 2, ,9-10,2 2, ,0-10,2 2, ,1-12,7 2, ,2-12,7 2, ,1-19,0 2, ,8-25,4 2,00 15 Lengths 1.22 m CATV industry specifications Minimal heat required to An absolutely aterproof seal Selective strippability to meet produce error-free installation ithout splitting Thermochromatic paint ensures integrity of seal Continuous Operating Temperature: -55 C to 110 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM- 412, ISO 37 14,5 MPa Elongation ASTM- 412, ISO % Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Abrasion Resistance ASTM mg Adhesive Softening Point ASTM-E C Adhesive Peel Strength to PE ASTM N/25mm Adhesive Peel Strength to Aluminium ASTM N/25mm Adhesive Lap Sheer (1 in./min. at 23 C) ASTM ,1 MPa Adhesive Viscosity (132 C) ASTM CPS Water Penetration (on installed tubing: 50 C for 14 days) ASTM-706 No penetration ielectric Strength ASTM kv/mm Volume Resistivity ASTM Ω x cm Copper Corrosion ASTM No Corrosion Fungus Resistance no groth Water Absorption ASTM-G 21 0,10% black Special Colours Not Available Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: CFTV 0750 black, 480 pcs., 1,22 mtr.-lengths 48 49

26 CFHR Heavy Wall Crosslinked Polyolefin Medium & Heavy Wall Non Flame retardant 6:1 CFHR imensions ORER REF. NO. EXPANE RECOVERE ELIVERY UNITS CFHR High ratio heat shrinkable tubing accommodates extreme differences beteen cables, connectors and backshells INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) mm IN mm mm pcs ,0-3,2 3, ,0-5,5 3, ,4-7,4 3, ,8-8,3 4, ,8-11,7 4, ,9-17,1 4, ,4-22,9 4,80 5 Lengths 1.22 m 6:1 Shrink ratio Accommodates a ide variety of connector shapes and configurations Optional thermoplastic adhesive liner for complete environmental protection and insulation Continuous Operating Temperature: -55 C to 110 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM- 412, ISO 37 14,5 MPa Elongation ASTM- 412, ISO % Longitudinal Change ASTM % to -10% max. Specific Gravity ASTM ,10 g/cm 3 Elongation after Heat Aging (168 hrs at 150 C) ASTM % Elongation after Heat Shock (4 hrs at 225 C) ASTM No cracking or floing Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Hardness (Shore ) ASTM ielectric Strength ASTM- 149 / IEC kv/mm ielectric Voltage Withstand (2500 V, 60Hz, 1min) UL 486 no breakdon Volume Resistivity ASTM Ω x cm Property Test Method Copper Corrosion ASTM No Corrosion Resistance good to excellent Water Absorption ASTM ,10% Adhesive Adhesive Lap Sheer ASTM ,875 Mpa (1in./min at 23 C) Softening Point ASTM-E C/-5 C Adhesive Peel Strength (300mm/min at 23 C) > to steel, aluminium, P.E 110 N/25mm > to PVC ASTM N/25mm Adhesive Blocking (30 C) ASTM no blocking no penetration after 236 hrs.of continuous Water Penetration ASTM 706 immersion black Special Colours Not Available Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Lining Options For example: CFHR 0750 black, 140 pcs., 1,22 mtr lengths, lined 50 51

27 Non Polyolefin Products SG-Canusa provides special materials for demanding applications. These products, made of materials ranging from elastomers to fluoropolymers, offer increased protection against extreme temperatures and harsh operating environments

28 CVN 7 Thin Wall flexible PVC Non Polyolefin Flame retardant 2:1 CVN 7 imensions EXPANE RECOVERE ELIVERY UNITS CVN 7 Thin all flexible PVC heat shrink tubing INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black & Coloured Spoollength Style* mm IN mm mm m pcs. 2,4 3/32 1,2 0, o - 3,2 1/8 1,6 0, o - 4,8 3/16 2,4 0, o - 6,4 1/4 3,2 0, o - 9,5 3/8 4,8 0, o - 12,7 1/2 6,4 0, o - 16,0 5/8 8,0 0, ,0 3/4 9,5 0, ,4 1 12,7 0, ,8 1 1/4 15,9 0, ,0 1 1/2 19,0 1, ,8 2 25,4 1, ,0 2 1/2 32,0 1, ,0 3 38,1 1, ,6 4 50,8 1, * o = airfilled or oval = flattened Lengths 1.22 m Flexible Meets UL-224 VW-1 & CSA OFT Continuous Operating Temperature: -30 C to 105 C Shrink Temperature: 100 C Technical ata Tensile Strength ISO MPa Elongation ISO % Longitudinal Change ASTM % to -20% Specific Gravity ISO / R ,3 g/cm 3 max. Elongation after Heat Aging (168 hrs at 136 C) ASTM % no dripping, floing, Heat Shock (4hrs. at 180 ) UL 224 or cracking Lo Temperature Flexibility UL 224 does not break at -30 C passed Flammability UL 224 (VW-1 rated to UL 224) eformation UL % max. Restricted Recovery UL 224 passed ielectric Strength IEC kv/mm Resistance ISO 1817, ISO 37, good MIL Water Absorption ASTM ,50% Special Colours Printability Hot stamp Ink jet Offset black red yello blue hite - good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: CVN 7 black 1/2", mtr., 100m-spool, unprinted Storage: Please note that CVN 7 should be stored at temperatures belo 23 C and used ithin 6 months of delivery

29 ERAY -KY 175 Thin Wall Kynar Non Polyolefin Flame retardant 2:1 ERAY -KY 175 imensions EXPANE RECOVERE ELIVERY UNITS ERAY -KY 175 Semi-rigid thin all Kynar * heat shrink tubing, ideal for electronic, automotive and military applications requiring protection and seethrough inspection INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) Clear Spool Length Style* Clear Spool Length Style* Lengths 1.22 m mm IN mm mm m m 1,2 3/64 0,6 0, o 150 o 30,5 m 1,6 1/16 0,8 0, o 150 o 30,5 m 2,4 3/32 1,2 0, o 150 o 30,5 m 3,2 1/8 1,6 0, o 150 o 30,5 m 4,8 3/16 2,4 0, o 75 o 30,5 m 6,4 1/4 3,2 0, o 75 o 12,2 m 9,5 3/8 4,8 0, ,2 m 12,7 1/2 6,4 0, ,2 m 19,0 3/4 9,5 0, ,2 m 25,4 1 12,7 0, ,2 m * o = airfilled or oval = flattened Highly flame retardant, UL-224 VW-1 & CSA OFT High ithstand to abrasion and cut-through Excellent chemical and solvent resistance Meets MIL - TL /8 Continuous Operating Temperature: -55 C to 175 C Shrink Temperature: 175 C * Kynar is a registered trademark of ATOFINA Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM % max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,8 g/cm 3 Elongation after Heat Aging (168 hrs at 200 C) IEC % Aging (168 hrs at 200 C) IEC MPa Elongation after Heat Shock (4 hrs at 250 C) IEC % Shock (4 hrs at 250 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Flammability UL 224 VW-1 flame retardant Property Test Method ielectric Strength VE 0303 Part 2 31,5 kv/mm Volume Resistivity VE 0303 Part Ω x cm Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance very good Water Absorption VE ,07% Special Colours Printability Hot stamp Ink jet Offset clear black very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -KY 175 1/8" clear, mtr., 300m-spool, unprinted 56 57

30 ERAY -KYF 190 Thin Wall Modified Crosslinked Fluorpolymer Non Polyolefin Flame retardant 2:1 ERAY -KYF 190 imensions EXPANE RECOVERE ELIVERY UNITS ERAY -KYF 190 Flexible thin all Kynar * heat shrink tubing, ith extreme chemical resistance, ideal for protecting components in a ide range of harsh conditions INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Clear Spool Length Lengths 1.22 m Style* mm IN mm mm m 1,2 3/64 0,6 0, o 30,5 m 1,6 1/16 0,8 0, o 30,5 m 2,4 3/32 1,2 0, o 30,5 m 3,2 1/8 1,6 0, o 30,5 m 4,8 3/16 2,4 0, o 30,5 m 6,4 1/4 3,2 0, o 12,2 m 9,5 3/8 4,8 0, ,2 m 12,7 1/2 6,4 0, ,2 m * o = airfilled or oval = flattened Highly flame retardant, UL-224 VW-1 High temperature resistance Continuous Operating Temperature: -55 C to 190 C Shrink Temperature: 175 C * Kynar is a registered trademark of ATOFINA Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM % max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,8 g/cm 3 Elongation after Heat Aging (168 hrs at 215 C) IEC % Aging (168 hrs at 215 C) IEC MPa Elongation after Heat Shock (4 hrs at 275 C) IEC % Shock (4 hrs at 275 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Flammability UL 224 VW-1 flame retardant Property Test Method ielectric Strength VE 0303 Part 2 33 kv/mm Volume Resistivity VE 0303 Part Ω x cm Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance very good Water Absorption VE ,30% Special Colours Printability Hot stamp Ink jet Offset clear black (other colours on request) very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -KYF 190 1/8" clear, mtr., 300m-spool, unprinted 58 59

31 ERAY -V 25 Flame 2:1 Modified Crosslinked Elastomer retardant Non Polyolefin ERAY -V 25 imensions EXPANE RECOVERE ELIVERY UNITS ERAY -V 25 iesel resistant elastomeric heat shrink tubing, suited for protecting components in air and space travel as ell as for military applications INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) Black Spool Length Style* Black Spool Length Style* Lengths 1.22 m mm IN mm mm m m 3,2 1/8 1,6 0, o 50 o - 4,8 3/16 2,4 0, o 50 o - 6,4 1/4 3,2 1, o 50 o - 9,5 3/8 4,8 1, o 50 o - 12,7 1/2 6,4 1, o 30 o - 19,0 3/4 9,5 1, ,4 1 12,7 1, ,0 1 1/2 19,0 2, ,0 2 25,4 3, ,0 3 38,0 3, * o = airfilled or oval = flattened Flexible resistance Flame retardant High abrasion and cut Long-term resistance to diesel, hydraulic fluids and chemicals Meets MIL - TL /16 Continuous Operating Temperature: -75 C to 150 C Shrink Temperature: 180 C Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM ± 10% max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,5 g/cm 3 Elongation after Heat Aging (168 hrs at 160 C) IEC % Aging (168 hrs at 160 C) IEC MPa Heat Shock (4 hrs at 215 C) IEC passed Shock (4 hrs at 215 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -75 C Flammability UL 224 flame retardant Property Test Method ielectric Strength VE 0303 Part 2 22 kv/mm* Volume Resistivity VE 0303 Part Ω x cm *thickness dependent, min.12 kv/mm. Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good Water Absorption VE ,10% Special Colours Printability Hot stamp Ink jet Offset black On Request very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -V 25 1/2" black, 900 mtr., 30m-spool, printed 60 61

32 ERAY -V 25 TW Thin Wall Modified Crosslinked Elastomer Non Polyolefin Flame retardant 2:1 ERAY -V 25 TW imensions EXPANE RECOVERE ELIVERY UNITS ERAY -V 25 TW Very flexible, thin all, diesel resistant, elastomeric heat shrink tubing, especially suited for mechanical, thermal and chemical protection of sensitive components INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) Black Spool Length Style* Black Spool Length Style* Lengths 1.22 m mm IN mm mm m m 2,4 3/32 1,2 0, o 50 o - 3,2 1/8 1,6 0, o 50 o - 4,8 3/16 2,4 0, o 50 o - 6,4 1/4 3,2 0, o 50 o - 9,5 3/8 4,8 0, o 50 o - 12,7 1/2 6,4 0, o 30 o - 19,0 3/4 9,5 0, ,4 1 12,7 0, ,8 1 1/4 15,9 1, ,0 1 1/2 19,0 1, * o = airfilled or oval = flattened Very flexible Flame retardant Long-term resistance to diesel, hydraulic fluids and chemicals Continuous Operating Temperature: -75 C to 150 C Shrink Temperature: 170 C Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM % max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,5 g/cm 3 Elongation after Heat Aging (168 hrs at 160 C) IEC % Aging (168 hrs at 160 C) IEC MPa Heat Shock (4 hrs at 215 C) IEC passed Shock (4 hrs at 215 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -75 C Flammability UL 224 flame retardant Property Test Method ielectric Strength VE 0303 Part 2 22 kv/mm* Volume Resistivity VE 0303 Part Ω x cm *thickness dependent, min. 12 kv/mm. Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance good Water Absorption VE ,10% black Special Colours On Request Printability Hot stamp Ink jet Offset very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -V 25 TW 1/2" black, mtr., 30m-spool, printed 62 63

33 ERAY -VT 220 Thin Wall Crosslinked Viton Non Polyolefin Flame retardant 2:1 ERAY -VT 220 imensions EXPANE RECOVERE ELIVERY UNITS ERAY -VT 220 Thin all Viton * fluoroelastomer heat shrink tubing, ideal for protecting electronic components in high temperature systems INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) Black Spool Length Style* mm IN mm mm m 3,2 1/8 1,6 0,80 50 o - 4,8 3/16 2,4 0,90 50 o - 6,4 1/4 3,2 0,90 50 o - 9,5 3/8 4,8 1,00 50 o - 12,7 1/2 6,4 1,20 30 o - 19,0 3/4 9,5 1, ,4 1 12,7 1, ,0 1 1/2 19,0 2, ,8 2 25,4 2, * o = airfilled or oval = flattened Lengths 1.22 m Very flexible Flame retardant Highly abrasion resistant High ithstand to corrosive fluids in extreme temperatures Meets MIL - TL /13 Continuous Operating Temperature: -55 C to 220 C Shrink Temperature: 175 C Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM % max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,9 g/cm 3 Elongation after Heat Aging (168 hrs at 250 C) IEC % Aging (168 hrs at 250 C) IEC MPa Elongation after Heat Shock (4 hrs at 300 C) IEC % Shock (4 hrs at 300 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -55 C Flammability ASTM Proc. A passed Property Test Method ielectric Strength VE 0303 Part 2 16 kv/mm Volume Resistivity VE 0303 Part Ω x cm Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance very good Water Absorption VE ,20% * Viton is a registered trademark of du Pont de Nemours and Co. Inc. Special Colours Printability Hot stamp Ink jet Offset black On Request very good good good Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit 4) Printing Options For example: ERAY -VT 220 3/16" black, mtr., 50m-spool, printed 64 65

34 ERAY -PTFE Modified Crosslinked Fluorpolymer Non Polyolefin Flame retardant 4:1 & 2:1 ERAY -PTFE imensions PTFE 4:1 PTFE AWG 2:1 ERAY -PTFE PTFE Teflon * heat shrink tubing specially designed for protecting applications in extreme electrical, chemical and thermal environments Semi-rigid Highly flame retardant ly inert Continuous Operating Temperature: -65 C to 260 C Shrink Temperature: 350 C * Teflon is a registered trademark of du Pont de Nemours and Co. Inc. EXPANE INTERNAL IAMETER (MIN) Technical ata INTERNAL IAMETER (MAX) RECOVERE WALL THICKNNESS (NOM) Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM ± 15% max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 2,1 g/cm 3 Thermal Aging no dropping, floing or (168 hrs at 300 C) IEC cracking Thermal Shock no dropping, floing or (4 hrs at 400 C) IEC cracking Lo Temperature Flexibility ASTM Meth. C does not break at -65 C Flammability non combustible ELIVERY UNITS Lengths 1.22 m EXPANE RECOVERE ELIVERY UNITS INTERNAL IAMETER (MIN) Property Test Method ielectric Strength VE 0303 Part 2 26 kv/mm Volume Resistivity VE 0303 Part Ω x cm INTERNAL IAMETER (MAX) WALL THICKNNESS (NOM) mm IN mm mm AWG mm mm mm 1,98 5/64 0,64 0,23 30,50 m 30 0,86 0,38 0,23 30,50 m 2,36 3/32 0,80 0,25 30,50 m 28 0,97 0,46 0,23 30,50 m 3,18 1/8 0,94 0,25 30,50 m 26 1,17 0,56 0,23 30,50 m 4,76 3/16 1,27 0,30 30,50 m 24 1,27 0,64 0,25 30,50 m 6,35 1/4 1,60 0,30 12,20 m 22 1,4 0,80 0,25 30,50 m 9,52 3/8 2,44 0,30 12,20 m 20 1,52 0,97 0,30 30,50 m 12,70 1/2 3,66 0,38 12,20 m 18 1,93 1,17 0,30 30,50 m 15,88 5/8 4,52 0,38 12,20 m 16 2,36 1,45 0,30 30,50 m 19,05 3/4 5,70 0,38 12,20 m 14 3,05 1,82 0,30 30,50 m 25,40 1 7,06 0,38 12,20 m 12 3,81 2,26 0,30 30,50 m 31,75 1 1/4 8,82 0,38 12,20 m 10 4,85 2,80 0,30 30,50 m 8 6,1 3,55 0,38 12,20 m 6 7,67 4,40 0,38 12,20 m 4 9,4 5,45 0,38 12,20 m 2 10,92 6,90 0,38 12,20 m 0 11,94 8,56 0,38 12,20 m Property Test Method Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Resistance very good Water Absorption VE ,07% Lengths 1.22 m clear Special Colours black Printability Hot stamp Ink jet Offset Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: ERAY -PTFE 4:1 3/32" clear, 122,0 mtr., 1,22 m-length 66 67

35 Market Specific Products Specialty product lines have gron as SG- Canusa continues ith its commitment to be a full service and product supplier to key markets. Examples include: Solutions for the /Utility market including break-out boots, end caps and RAIL-LESS sleeves Automotive products including ire harness solutions, hose & pipe solutions and a ide variety of shrink appliances Products for Electronics applications ranging from high performance tubing for the industrial user to tube kits for the tradesman. Communications industry solutions including fiber optic splice protectors and splice closures 68 69

36 CCAP-RL Medium Wall Crosslinked Polyolefin End Cap Market Specific Products Non Flame retardant 3:1 CCAP-RL imensions ORER REF. NO. EXPANE RECOVERE CCAP-RL Heat shrinkable end caps provide a simple yet effective method for sealing cable ends, pipe conduit, or other similar objects INTERNAL IAMETER (MIN) LENGTH* INTERNAL IAMETER (MAX) LENGTH** WALL THICKNESS (NOM) GENERAL USE IAMETER W mm mm mm mm mm mm ,2 50,8 3,8 42,3 2,0 4,5-8, ,1 63,5 5,6 42,3 2,0 6,0-16, ,9 76,2 10,2 57,2 2,4 11,5-25, ,0 76,2 10,2 57,2 2,4 11,5-30, ,1 88,9 12,7 59,5 2,4 14,0-35, ,2 88,9 12,7 59,5 2,5 14,0-40, ,1 88,9 19,0 59,5 2,5 21,0-45, ,8 101,6 25,4 81,3 2,5 30,0-63, ,9 114,3 30,0 91,4 2,5 33,0-83, ,4 139,7 39,9 118,2 2,7 40,6-114,3 * Length is measured from shoulder to open end of cap ** Recovery dimensions ±6 mm Superior resistance to eathering, moisture contamination and adverse environmental conditions Resistant to fluids and solvents Optional adhesive liner provides complete environmental protection and insulation Heat indicating lines Continuous Operating Temperature: -55 C to 110 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM- 412, ISO 37 14,5 MPa Elongation ASTM- 412, ISO % Specific Gravity ASTM- 792, A-I 1,1 g/cm 3 max. Elongation after Heat Aging (168 hrs at 150 C) ASTM % Heat Shock (4 hrs at 225 C) ASTM no cracking or floing Lo Temperature Flexibility ASTM does not break at -55 C Hardness (Shore ) ASTM ielectric Strength ASTM kv/mm ielectric Voltage Withstand (2500 V, 60Hz, 1min) UL 486 no breakdon Volume Resistivity ASTM Ω x cm black Special Colours On Request Printability Hot stamp Ink jet Offset good good good Seal Integrity Room Temperature (23 C) 168 hrs/ 40psi no leaks Temp. Cycling (- 40 C to 60 C) 50 cycles maintains seal Burst Pressure 0,70 MPa Adhesive Lap Sheer (1in./min at 23 C) ASTM psi (0,91 MPa) Softening Point ASTM-E C/-5 C Adhesive Peel Strength (300mm/min at 23 C) ASTM > to steel, aluminium, P.E 35 pli > to PVC 20 pli Adhesive Blocking (30 C) ASTM no blocking no penetration after 236 hrs.of continuous Water Penetration ASTM 706 immersion Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Fluid Resistance MIL-TL good to excellent Water Absorption ASTM ,10% Fungus Resistance ASTM-G 21 no groth Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity 4) Printing Options 5) Lining Options 6) Valve Options For example: CCAP-RL 0400 black, pcs., unprinted, lined, unvalved 70 71

37 CCB Crosslinked Polyolefin Cable Breakout Boots Market Specific Products Non Flame retardant Various Shrink Ratios CCB CCB Heat shrinkable boots seal and protect multi-conductor cable and conduit breakouts Boots for 2, 3, 4, 5 and 6 ay cable breakouts Strain relief and mechanical protection Resistant to fluids and solvents Thermoplastic adhesive liner provides complete environmental protection and insulation Also available as anti-track medium voltage breakouts and as conductive breakouts Continuous Operating Temperature: -55 C to 100 C Shrink Temperature: 135 C imensions ORER REF. NO. EXPANE RECOVERE BREAKOUT MAIN IAMETER (MIN) elivery Units on request CCB Lo Voltage Breakouts FINGER IAMETER (MIN) BREAKOUT MAIN IAMETER (MAX) FINGER IAMETER (MAX) Ordering: Specify the product name and the number of cores plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity 4) Printing Options For example: CCB3 38/11 black, pcs., unprinted RECOVERE FULL LENGTH ± 10% RECOVERE FINGER LENGTH mm mm mm mm mm mm CCB2 - To Core Breakouts CCB2 33/14 33,0 14,0 10,0 3,0 90,0 20,0 CCB2 50/21 50,0 21,0 22,0 6,7 119,0 35,0 CCB2 77/37 77,0 37,0 38,0 12,7 141,0 42,0 CCB3 - Three Core Breakouts CCB3 38/11 38,0 11,0 14,0 4,0 110,0 20,0 CCB3 60/24 60,0 24,0 22,0 8,0 185,0 45,0 CCB3 80/36 80,0 36,0 33,0 16,0 210,0 50,0 CCB3 110/48 110,0 48,0 47,0 20,0 260,0 75,0 CCB3 125/55 125,0 55,0 47,0 20,0 260,0 75,0 CCB3 140/62 140,0 62,0 54,0 27,0 250,0 65,0 CCB4 - Four Core Breakouts CCB4 38/15 38,0 15,0 14,0 3,0 105,0 20,0 CCB4 55/20 55,0 20,0 25,0 6,0 180,0 45,0 CCB4 72/25 72,0 25,0 22,0 8,5 190,0 45,0 CCB4 100/35 100,0 35,0 33,0 14,0 215,0 50,0 CCB4 125/45 125,0 45,0 47,0 22,0 245,0 72,0 CCB5 - Five Core Breakouts CCB5 60/30 60,0 30,0 24,0 7,5 180,0 30,0 CCB6 - Six Core Breakouts CCB6 61/21 61,0 20,5 37,0 9,0 137,0 51,0 Technical ata Tensile Strength ASTM- 638 (M) 10,0 MPa min. Elongation ASTM- 638 (M) 300% min. Hardness Internal 40 Shore min. Tensile Strength after thermal aging (120 C, 168 hrs) ISO Mpa min. Elongation after thermal aging (120 C, 168 hrs) ISO % min. Water absorption ISO % max. ielectric Strength IEC kv/mm ielectric Constant IEC - 250/ASTM max. Resistance to tracking ASTM N/A Volume Resistivity IEC Ω x cm Flammability ESI Non flame retardant Special Colours CCB black On Request ± 10% Printability Hot stamp Ink jet Offset excellent excellent excellent 72 73

38 CCBA & CCB-Con Crosslinked Polyolefin Cable Breakout Boots Market Specific Products Non Flame retardant Various Shrink Ratios CCBA & CCB-CON imensions CCBA Anti-Track Medium Voltage Breakouts - Three Core Breakouts only ORER REF. NO. EXPANE RECOVERE RECOVERE FULL LENGTH RECOVERE FINGER LENGTH CCBA & CCB-Con Heat shrinkable boots seal and protect multi-conductor cable and conduit breakouts CCBA = Anti-track medium voltage breakouts CCB-Con = Conductive breakouts BREAKOUT MAIN IAMETER (MIN) FINGER IAMETER (MIN) BREAKOUT MAIN IAMETER (MAX) FINGER IAMETER (MAX) mm mm mm mm mm mm CCBA 60/24 60,0 24,0 22,0 8,0 185,0 45,0 CCBA 80/36 80,0 36,0 33,0 16,0 210,0 50,0 CCBA 110/48 110,0 48,0 47,0 20,0 260,0 75,0 CCBA 125/55 125,0 55,0 47,0 20,0 260,0 75,0 CCB-Con Conductive Breakouts - Three Core Breakouts only ORER REF. NO. EXPANE RECOVERE BREAKOUT MAIN IAMETER (MIN) FINGER IAMETER (MIN) BREAKOUT MAIN IAMETER (MAX) FINGER IAMETER (MAX) ± 10% RECOVERE FULL LENGTH ± 10% ± 10% RECOVERE FINGER LENGTH mm mm mm mm mm mm CCB-CON 60/24 60,0 24,0 22,0 8,0 185,0 45,0 CCB-CON 80/36 80,0 36,0 33,0 16,0 210,0 50,0 CCB-CON 110/48 110,0 48,0 47,0 20,0 260,0 75,0 CCB-CON 125/55 125,0 55,0 47,0 20,0 260,0 75,0 ± 10% Technical ata Strain relief and mechanical protection solvents Thermoplastic adhesive liner Resistant to common fluids and provides complete environmental protection and insulation Continuous Operating Temperature: -55 C to 100 C Shrink Temperature: 135 C Product Property Test Method CCBA CCB-Con Tensile Strength ASTM- 638 (M) 7,0 MPa min. 12,0 MPa min. Elongation ASTM- 638 (M) 300% min. 300% min. Hardness Internal 32 Shore min. 40 Shore min. Tensile Strength after thermal aging (120 C, 168 hrs) ISO Mpa min. 10 Mpa min. Elongation after thermal aging (120 C, 168 hrs) ISO % min. 250% min. Water absorption ISO % max. 1% max. ielectric Strength IEC kv/mm Conductive ielectric Constant IEC - 250/ASTM max. Conductive no failure by tracking after 1 hour at 2.5 kv, 1 hour at 2.75 kv, 1 hour at 3.0 kv, Resistance to tracking ASTM minutes at 3.25 kv N/A Volume Resistivity IEC Ω x cm 2*10 4 Ω x cm Flammability ESI non burning Non flame retardant Printability Hot stamp Ink jet Offset Excellent Excellent Excellent Special Colours CCBA reddish-bron CCB-Con black Not Available Ordering: Specify the product name and the number of cores plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity 4) Printing Options For example: CCBA 60/24, reddish-bron, pcs., unprinted 74 75

39 CEC Crosslinked Polyolefin End Cap Market Specific Products Non Flame retardant >2:1 CEC imensions ORER REF. NO. EXPANE RECOVERE CEC Adhesive-lined heat shrinkable end cap hich enables easy protection and sealing of unused cables from environmental effects INTERNAL IAMETER* (MIN) A INTERNAL IAMETER* (MAX) A LENGTH (MIN) B WALL THICKNESS (MIN) T GENERAL USE IAMETER mm mm mm mm mm CEC 15/4,5 15,0 4,5 45,0 1,0 5,0-12,0 CEC 25/9 25,0 9,0 70,0 2,7 10,0-22,0 CEC 36/15 36,0 15,0 95,0 2,8 17,0-30,0 CEC 63/24 63,0 24,0 110,0 3,6 28,0-55,0 CEC 80/40 80,0 40,0 130,0 3,6 45,0-70,0 CEC 102/60 102,0 60,0 152,0 3,6 68,0-90,0 CEC 124/60 124,0 60,0 152,0 3,6 75,0-110,0 CEC 148/57 148,0 57,0 152,0 4,5 80,0-135,0 * Internal diameter ithout adhesive coating Unaffected by ultraviolet light Good chemical and solvent resistance Thermoplastic liner provides complete environmental seal Continuous Operating Temperature: -55 C to 100 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM- 638 M 12,0 MPa min. Elongation ASTM- 638 M 300% min. Water Absorption ISO ,0% max. Shore Hardness ASTM Shore min. Aging (168 hrs at 120 C) ISO ,0 MPa min. Elongation after Heat Aging (168 hrs at 120 C) ISO % min. ielectric Strength IEC kv/mm min. Volume Resistivity IEC Ω x cm Printability Hot stamp Ink jet Offset good good good black Special Colours On request Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity 4) Printing Options For example: CEC 36/55 black, pcs., unprinted 76 77

40 CFSP Fibre Optic Splice Protector Market Specific Products Non Flame retardant 3:1 CFSP imensions CFSP Nominal Sleeve Length Inside iameter of Inner Liner (MIN) Nominal Steel iameter ELIVERY UNITS mm mm mm pcs. 61,0 1,5 1, ,0 1,5 1, ,0 1,5 1,2 100 A specially designed crosslinked polyolefin tubing system, ith meltable liner, providing strength and protection to optical fibre splices Single-holed (preshrunk) ends eliminate improper fibre threading Smooth, deburred stainless steel reinforcing member ends decrease the risk of fibre damage during installation Extended liner length prevents contact beteen the fibre and the backbone Clear sleeve design permits easy centering of splice before heating Continuous Operating Temperature: -20 C to 60 C Shrink Temperature: 90 C Technical ata Tensile Strength ASTM- 2671, ISO R MPa ensity ISO R1183 0,94 Vicat Softening Point ISO R C Ultimate Elongation ISO % Longitudinal Change ASTM ±5% ielectric Strength IEC kv/mm clear Special Colours On request Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity For example: CFSP 45,0 mm clear, pcs

41 CGEL 596 / CGEL 711 Gel rop Splice Enclosure Market Specific Products CGEL 596 / CGEL 711 CGEL 596 / CGEL 711 Gel filled closure provides complete environmental protection for coaxial drop splices in burial and aerial applications Single piece, clam shell design, requires no additional tools for installation Gel filled for complete aterproof protection Expansion chambers prevent gel overflo Accommodates a ide range of standard F type and environmentally sealed coaxial connectors Accommodates all coaxial cable types including quad shielded cable Fully re-enterable messenger cable testing to 5 ft-lbs force Channel provided for retaining Tough outer shell ithstands impact Meets SCTE IPS-TP-013 requirements for ater immersion and temperature cycling imensions CGEL NOMINAL IAME- TER (MIN) STANAR LENGTH mm mm pcs ,4 116, ,48 165,0 12 Technical ata Gel Properties Cone Penetration ASTM ,0 mm Surface Tack 3,0 sec Elongation > 1.200% Specific Gravity ASTM- 70 0,98 g/cm 3 max. Environmental Heat Aging 60 C for 30 days passed all tests properties retained for Long Term Life 20 years Hydrophobic Properties HLB<2 3.3 max at 1kHz ielectric Constant ASTM max at 100 khz 0.03 max at 1 khz Poer Factor ASTM max at 100 khz Ordering: Specify: CGEL 596 or CGEL Total Quantity ELIVERY UNITS Application Ranges Cables: 596: All 59 & 6 series coaxial cables including quad shield ith messengers 711: All RG 7 & RG 11 series coaxial cables including quad shield ith messengers CGEL & 6 series coaxial connectors RG 7 & RG 11 series coaxial connectors igicon: Type 2 series, S series, 6 splice series S series, RG 11 series F series, SNS series, environmentally Augat: sealed SNS F series, SNS series GF, GFW and GF 360 F type, Gilbert: ultraseal series GAF, GF 11S, GAF 360 type 7 & 11 Closure Properties Material Tensile Strength ASTM MPa Notched Izod Impact at 23 C ASTM- 256A 2.0 ft-lbs/in rop Weight Impact Strength at -29 C Montell 21 ft-lbs Specific Gravity ASTM ,90 g/cm 3 max. Moisture Migration SCTE IPS-TP-013 no moisture migration Canusa-AH-01 no cracking or opening Impact Strength 5 ft-lbs, -18 C, 38 C of closure black Special Colours Not Available 80 81

42 CBTM Medium Voltage Crosslinked Polyolefin Bus Bar Tubing Market Specific Products Flame retardant 3:1 CBTM imensions CBTM - for services to 36 kv on unbolted bus bar ORER REF. NO. EXPANE RECOVERE APPLICATION RANGES ELIVERY UNITS CBTM Medium all anti-track heat shrinkable tubing specifically designed for insulating medium voltage bus bars INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) RECTANGULAR BUS BARS (MIN) (MAX) ROUN BUS BARS (MIN) (MAX) mm mm mm mm mm mm mm m CBTM ,0 5,5 2,70 6,4 6,4 6,8 15,2 15 CBTM ,0 10,1 3,00 12,7 28,5 12,4 27,9 15 CBTM ,0 19,0 2,80 31,5 50,8 22,3 43,1 15 CBTM ,8 25,4 2,90 44,4 76,2 29,7 58,4 15 CBTM ,9 29,9 3,10 57,1 101,6 35,8 73,6 15 CBTM ,3 39,9 3, ,8 47,7 101,6 15 CBTM ,1 58,4 3,20 114,3 203,2 69,5 144,7 15 Rectangular bus bars have thickness of 1/4 to 5/8 inch. RE Application ranges noted above selected to obtain minimum insulation thickness required to meet ANSI C ithstands requirements at bus bar spacing noted belo. These spacings ere determined from a limited number of test configurations. ue to the ide variety of bus bar configurations, these spacings should not be employed ithout actual testing by the user. Clearances ith Insulation requirements Flame Retardant Reduces bus bar clearance Protects against accidental flashover Anti-track Halogen free Tested to ANSI C standards for medium voltage sitchgear applications to 36 kv UL recognised component Continuous Operating Temperature: -40 C to 125 C Shrink Temperature: 120 C SYSTEM VOLTAGE BIL kv CBTM Medium Wall Tubing p to p (mm) p to g (mm) 15 kv 95 86,0 106,0 25 kv ,0 152,0 36 kv ,0 203,0 Technical ata Tensile Strength ASTM- 412, ISO 37 8,3 MPa Elongation ASTM- 412, ISO % Heat Aging (7 days at 175 C) Tensile Strength ASTM Mpa Elongation ASTM % Heat Shock (4 hrs at 225 C) ASTM no cracking or floing Lo Temp. Flexibility (4 hrs at -40 C) ASTM no cracking ANSI C37.20, Flammability ASTM passed red Special Colours Not Available p to p: Phase to Phase orientation p to g: Phase to Ground orientation Spacing based on metal to metal dimension prior to insulation Spacing based on insulation all thickness per application range of above table ielectric Strength ASTM kv/mm Surface Resistivity ASTM x 10 9 Ω Volume Resistivity ASTM x Ω cm ielectric Constant ASTM Tracking Resistance ANSI C37.20, (2500 V, 300 min) ASTM non-tracking non-tracking after 6000 Weathering ASTM-G 53 hours Corrosive Action ASTM non-corrosive Fluid Resistance MIL-TL-23053/15 good to excellent Water Absorption ASTM ,25% Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: CBTM 52/19 red, mtr., 15m-spool 82 83

43 CBTH Medium Voltage Crosslinked Polyolefin Bus Bar Tubing Market Specific Products Flame retardant 3:1 CBTH imensions CBTH - for services to 36 kv on unbolted bus bar ORER REF. NO. EXPANE RECOVERE APPLICATION RANGES ELIVERY UNITS CBTH Heavy all anti-track heat shrinkable tubing specifically designed for insulating medium voltage bus bars INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) RECTANGULAR BUS BARS (MIN) (MAX) ROUN BUS BARS (MIN) (MAX) mm mm mm mm mm mm mm m CBTH ,9 8,9 3,90 9,5 12,7 10,6 17,7 15 CBTH ,8 16 4,10 25,4 34,9 19,3 33,0 15 CBTH ,0 22,1 4,10 34,9 50,8 26,1 43,1 15 CBTH ,9 29,9 4,10 50,8 76,2 35,8 58,4 15 CBTH ,9 39,9 4,20 69,8 111,1 47,7 81,2 15 CBTH ,6 58,4 4,20 107,9 177,8 69,5 124,4 15 Rectangular bus bars have thickness of 1/4 to 5/8 inch. RE Application ranges noted above selected to obtain minimum insulation thickness required to meet ANSI C ithstands requirements at bus bar spacing noted belo. These spacings ere determined from a limited number of test configurations. ue to the ide variety of bus bar configurations, these spacings should not be employed ithout actual testing by the user. Clearances ith Insulation requirements Flame Retardant Reduces bus bar clearance Protects against accidental flashover Anti-track Halogen free Tested to ANSI C standards for medium voltage sitchgear applications to 36 kv UL recognised component Continuous Operating Temperature: -40 C to 125 C Shrink Temperature: 120 C SYSTEM VOLTAGE BIL kv CBTM Medium Wall Tubing p to p (mm) p to g (mm) 15 kv 95 55,0 66,0 25 kv ,0 101,0 36 kv ,0 190,0 Technical ata Tensile Strength ASTM- 412, ISO 37 8,3 MPa Elongation ASTM- 412, ISO % Heat Aging (7 days at 175 C) Tensile Strength ASTM Mpa Elongation ASTM % Heat Shock (4 hrs at 225 C) ASTM no cracking or floing Lo Temp. Flexibility (4 hrs at -40 C) ASTM no cracking ANSI C37.20, Flammability ASTM passed red Special Colours Not Available p to p: Phase to Phase orientation p to g: Phase to Ground orientation Spacing based on metal to metal dimension prior to insulation Spacing based on insulation all thickness per application range of above table ielectric Strength ASTM kv/mm Surface Resistivity ASTM x 10 9 Ω Volume Resistivity ASTM x Ω cm ielectric Constant ASTM Tracking Resistance ANSI C37.20, (2500 V, 300 min) ASTM non-tracking non-tracking after 6000 Weathering ASTM-G 53 hours Corrosive Action ASTM non-corrosive Fluid Resistance MIL-TL-23053/15 good to excellent Water Absorption ASTM ,25% Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: CBTH 50/16 red, 300 mtr., 15m-spool 84 85

44 ERAY -KSF Heavy Wall Crosslinked Polyolefin Market Specific Products Flame retardant >2:1 ERAY -KSF imensions EXPANE RECOVERE ELIVERY UNITS ERAY -KSF Heavy all anti-track heat shrinkable tubing specifically designed for insulating medium voltage bus bars INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) mm mm mm m 19,0 6,0 2, ,0 10,0 4, ,0 12,0 2, ,0 12,0 2, ,0 19,0 3, ,0 16,0 4, ,0 19,0 3, ,0 19,0 3, ,0 25,0 3, ,0 32,0 3, ,0 40,0 4,10 10 RE Reduces bus bar clearance requirements Protects against accidental flash-over Anti-track Halogen free Continuous Operating Temperature: -40 C to 135 C Shrink Temperature: 125 C Technical ata Tensile Strength IEC MPa Elongation IEC % Longitudinal Change ASTM % ± 3% max. Secant Modulus ASTM MPa max. Specific Gravity ASTM- 792, A-I 1,2 g/cm 3 max. Elongation after Heat Shock (4 hrs at 200 C) IEC % Shock (4 hrs at 200 C) IEC MPa Lo Temperature Flexibility ASTM Meth. C does not break at -40 C Flammability FMVSS 302 passed red Special Colours Not Available ielectric Strength VE 0303 Part 2 20 kv/mm Volume Resistivity VE 0303 Part Ω x cm Comparative Tracking Index IEC 112 CTI 600<0,1 Corrosive Action ASTM Meth. A non-corrosive Copper Compatibility ASTM Meth. B non-corrosive Water Absorption VE ,20% Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: ERAY -KSF 19/6, red, 500 mtr., 50 m-spool, unprinted 86 87

45 CNTT Medium Voltage Crosslinked Polyolefin Market Specific Products Flame retardant 3:1 CNTT imensions EXPANE RECOVERE ELIVERY UNITS CNTT Medium all heat shrinkable nontracking tubing for use in MV joints & terminations up to 36kV INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) SPOOL LENGTH mm mm mm m 33,0 10,0 2, ,0 15,0 2, ,0 19,0 3, ,0 25,0 2,90 15 Non-tracking UV stabilised Flame retardant Exceptional electrical and eathering properties Suitable for outdoor & indoor terminations Continuous Operating Temperature: -55 C to 125 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM- 412, ISO 37 11,2 MPa Elongation ASTM- 412, ISO % Longitudinal Change ASTM % max. ISO/R 1183 Specific Gravity (A)/ASTM ,31 g/cm 3 Heat Shock (30 min at 200 C) ESI-0913 no cracking or floing Elongation after Heat Shock (500 hrs at 120 C) ASTM- 412, ISO % Shock (500 hrs at 120 C) ASTM- 412, ISO 37 8,56 MPa Lo Temperature Flexibility ASTM does not break at -40 C Flammability ASTM (B) passed red Special Colours Not Available ielectric Strength ASTM kv/mm Surface Resistance ASTM x10 9 Ω Volume Resistivity ASTM- 257/IEC *10 11 Ω cm ielectric Constant ASTM- 150/IEC-250 2,0 min. Tracking Resistance (2500 V, 300 min) ASTM no tracking after 12 hrs Corrosive Action ASTM non-corrosive no tracking after Environmental Salt fog test IEC hrs Resistance (Transformer Oil) ISO-175/ISO-37 passed 0,11% min., Water Absorption ASTM- 570/ ISO-62 0,28 max.% Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: CNTT 45/15, red, 150 mtr. 15 mtr.-reel 88 89

46 CRW Heat Shrinkable Cable Repair Sleeve Market Specific Products Non Flame retardant Various s CRW imensions EXPANE RECOVERE ELIVERY UNITS CRW Adhesive-lined, heat shrinkable raparound sleeve ith a flexible stainless steel locking channel. Used for general rejacketing and sealing applications, protection of damaged cable or as outer jacket on XLPE Copper Telecom cable joints from 10 pair to 2000 pair cable INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) BLACK LENGTHS mm mm mm m 43,0 8,0 2,30 1,0 75,0 15,0 2,30 1,0 93,0 25,0 2,30 1,0 137,0 34,0 2,30 1,0 160,0 48,0 2,30 1,0 200,0 48,0 2,30 1,0 and clean Provides ater tight seal upon recovery Excellent mechanical strength Application procedure is quick, simple Covered ith thermochromatic paint that changes colour upon achieving correct shrink temperature Sleeve can be cut to suit shorter application requirements Stainless steel channel provides permanent closure system Easy to install in situ over live cable ithout cutting the cable or shutting Technical ata Tensile Strength IN 53455/ISO R527 17,0 MPa min. Elongation IN 53455/ISO R % min. Aging (168 hrs at 150 C) IN 53455/ISO R MPa min. Elongation after Heat Aging (168 hrs at 150 C) IN 53455/ISO R % min. Carbon Black Content for UV Resistance VE % min. Lo Temperature Flexibility IN no cracking at -40 C Longitudinal Shrinkage 10% max. ielectric Strength IN 53481/IEC kv/mm don poer Installation temperature range: -30 C to +70 C Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Colour 3) Total Quantity + elivery Unit For example: CRW 93/25 black, pcs., 1,0 mtr.-length 90 91

47 CRLS Heat Shrinkable Cable Repair Sleeve Market Specific Products Non Flame retardant 3:1 CRLS imensions CRLS A superior raparound insulation product that easily installs in repair and splice applications and provides excellent insulation and protection for cable jackets CRLS-1 CRLS-2 CRLS-3 CRLS-4 CRLS-5 CRLS-6 EXPANE RECOVERE ELIVERY UNITS INTERNAL IAMETER (MIN) INTERNAL IAMETER (MAX) WALL THICKNESS (NOM) BLACK LENGTHS* mm mm mm 30,0 6,0 2, ,0 14,0 2, ,0 24,0 2, ,0 33,0 2, ,0 47,0 2, ,0 67,0 2,00 1 * Standard lengths are: 152 mm, 203 mm, 305 mm, 610 mm and 914 mm Shut don of system not required for repair High shrink ratio covers even irregular shapes Simple RAIL-LESS * installation ith clamshell design Thermoplastic adhesive liner provides complete environmental protection and insulation Meets ICEA and NEMA insulation thickness specifications Continuous Operating Temperature: -55 C to 110 C Shrink Temperature: 120 C Technical ata Tensile Strength ASTM MPa Elongation ASTM % Heat Shock (4hrs at 225 C) ASTM no cracking or floing Air Oven Aging (7 days at 150 C) Tensile Strength ASTM ,5 MPa Elongation ASTM % Specific Gravity ASTM ,94 g/cm 3 Hardness (Shore ) ASTM ielectric Strength ASTM kv/mm min. Volume Resistivity ASTM ,9x10 18 Ω x cm ielectric Constant (1 KHZ) ASTM ,05 Fluid Resistance MIL-TL-23053/15 good to excellent Hydraulic Fluid (MIL H5606C) MIL-TL-23053/15 Tensile Stength ASTM- 638, ISO MPa Elongation ASTM- 638, ISO % Lubricating Oil (MIL L7808G) MIL-TL-23053/15 Tensile Stength ASTM- 638, ISO MPa Elongation ASTM- 638, ISO % iesel Fuel MIL-TL-23053/15 Tensile Stength ASTM- 638, ISO 37 14,5 MPa Elongation ASTM- 638, ISO % Corrosive Action ASTM non-corrosive Fungus Resistance ASTM-G 21 no groth Water Absorption ASTM ,1% max. Ordering: Specify the product name plus each of the folloing options: 1) Size 2) Length 3)Colour 4) Total Quantity For example: CRLS 68/24, 203 mm, black, 100 pcs. * RAIL-LESS is a registerd trademark of Shacor Ltd

48 Lo Voltage Kits Heat Shrinkable Joint Kits Market Specific Products Lo Voltage Kits Lo Voltage Kits LVJUAC, LVJUAM and LVJUAS connecting (cable-jointing) sleeves are perfectly suitable for joining multi-core, polymeric insulated energy cables in the lo voltage range. LVJUAM Multi-region joint sleeve for scre connectors LVJUAC Multi-region joint sleeve for crimp connectors LVJUAS Joint kits for screened polymeric cable CJK/CTK Joint and termination kits for armoured cables insulation Quick, simple installation Exceptionally good electrical Good mechanical load-bearing ability Usable immediately Tested to IN 47632/VE 0278/H623 part 1and 3 No maintenance time necessary Available ith the folloing interior coatings A = hot-melt adhesive S = sealing composition imensions Joint kits for plastic-insulated 0.6/1kV cables ESCRIPTION CROSS SECTION OF CONUCTORS IN For Scre Connectors LVJUAM 4 X X 16 4 X X 16 LVJUAM 5 X X 16 5 X X 16 LVJUAM 4 X 6-4 X 25 4 X 6-4 X 25 LVJUAM 4 X 16-4 X 50 4 X 16-4 X 50 LVJUAM 5 X 16-5 X 50 5 X 16-5 X 50 LVJUAM 4 X 25-4 X 95 4 X 25-4 X 95 LVJUAM 4 X 35-4 X X 35-4 X 150 LVJUAM 4 X 95-4 X X 95-4 X 300 For Crimp Connectors LVJUAC 4 X X LVJUAC 5 X X LVJUAC 4 X X 6-35 LVJUAC 5 X X 6-35 LVJUAC 4 X X LVJUAC 4 X X LVJUAC 4 X X LVJUAC 4 X X Joint kits for screened-insulated 0.6/1kV cables ESCRIPTION CROSS SECTION OF CONUCTORS IN For Crimp Connectors LVJUAS 4 X X 16 4 X X 16 LVJUAS 5 X X 16 5 X X 16 LVJUAS 4 X 6-4 X 25 4 X 6-4 X 25 LVJUAS 4 X 16-4 X 50 4 X 16-4 X 50 LVJUAS 5 X 16-5 X 50 5 X 16-5 X 50 LVJUAS 4 X 25-4 X 95 4 X 25-4 X 95 LVJUAS 4 X 35-4 X X 35-4 X 150 LVJUAS 4 X 95-4 X X 95-4 X 300 Standard Contents 1 outer sleeve 3, 4 or 5 inner sleeves Cleaning cloth Abrasive cloth Installation instructions Screen continuity here applicable CABLE TYPE E.G. NYY, NXY, NYX, NXX ith Round (r)or sectorial (s), solid (e) or stranded (m), aluminium (Al) or Copper (cu) conductor NYY, NXY, NYX, NXX ith Round (r)or sectorial (s), solid (e) or stranded (m), aluminium (Al) or Copper (cu) conductor CABLE TYPE E.G. NYCY, NYCWY, NHXH ith Round (r)or sectorial (s), solid (e) or stranded (m), aluminium (Al) or Copper (cu) conductor Ordering: Specify the product referring to above dimension chart Joint kit for armoured cables COE CORE SIZE CJK 4 4 x mm 2 CJK 16 4 x 6-16 mm 2 CJK 50 4 x mm 2 CJK 95 4 x mm 2 CJK x mm 2 Earth and Armour continuity included in all kits. Connectors not included in kit contents. Termination kit for armoured cables COE CORE SIZE CTK16 4 x 6-16 mm 2 CTK 50 4 x mm 2 CTK 95 4 x mm 2 CTK x mm 2 N.B. Table is for four core cable only. Kits for to and three core cables including CNE cable available on request. Earthing kits available as optional extra. Cable Lugs not included. Standard Contents On request the sleeves can also be supplied in different lengths and/or diameters

49 Signal Kits Signal Cable Joints Market Specific Products Signal Kits SG-Canusa Signal Kits Signal Kits Suitable for mm 2 copper conductor Types YSLCY, LSYCvY, ZPFU, SZRMtk VM-J 0.6/1kV armoured. CSK-B signal kits are particularly suitable for connecting screened signal cables in industry, rail and mass transit. Individual splices can be supplied as separate kits to cover a ide range of sizes ith minimal stock EXTERNAL SHEATH OF CABLE MESH ROLL SPRING IMPERMEABLE BARRIER Thick Wall Tubing/CFW Thin Wall Tubing/ ERAY-I 3000 CSAT Mastic tape Copper Mesh insulation Quick, easy installation Exceptionally good electrical Good mechanical load-bearing ability No maintenance time necessary Usable immediately Include components for continuing electrical earth and shield Various connection options crimpseal dual all heat shrink tubing ith crimp connector CFTV - high shrink ratio tubing ith thermochromatic paint and high performance adhesive gives excellent mechanical and environmental protection Braid - tinned copper non corroding for continuation of screen Roll spring - gives good mechanical and electrical contact ith no insulation damage CSAT - mastic designed to perform even during flexing and vibration ERAY-I heat shrink tubing to replace inner insulation layer and continue aterproof seal KIT NAME CABLE RANGE (NO. OF PAIRS) CSKB CSKB CSKB

50 Medium Voltage Terminations Market Specific Products Medium Voltage Terminations Medium Voltage Terminations Heat shrinkable poer cable terminations consist of a non-tracking, eather resistant heat shrinkable protective tubing, heat shrinkable stress control tube and mastic. Each termination consists of appropriate tubes, rainsheds, cable breakouts, sealing materials, hardare and installation instructions Terminations Non-tracking, heat shrinkable outer insulation tubing Provides excellent UV stability Withstands polluted environments Is proven to ithstand severe applications Benefits of SG-Canusa components Suitable for 1 & 3 core cable Range includes kits for XLPE & PILC cables for a ide range of conductor cross sections Kits are available for both armoured & unarmoured cable Indoor & outdoor applications Excellent stress control properties Excellent moisture sealing Exceptional insulation characteristics Very high tracking resistance, good long term eather performance no grease Easy to install, even at lo temperatures Simple cable preparation - no sanding, Unsurpassed performance in polluted environments Non-tracking, high voltage sealant Provides atertight seal over connector Additional heat shrinkable creepage extenders for outdoor applications Increase surface creepage distance Easy to adapt indoor terminations to outdoor conditions Heat shrinkable stress control tubing Reduces electrical stress gradient at the end of the cable shield to safe opearting levels Stress relief material Minimizes stress at the shield cutback Acts as a moisture seal Ground clamp Has constant force roll spring, hich provides secure grounding ithout soldering Shielding and solderless grounding ith ground braid Provides shield continuity 98 99

51 Medium Voltage Joint Kits Market Specific Products Medium Voltage Joint Kits Medium Voltage Joint Kits Heat shrinkable poer cable joints consist of high voltage insulation tubing, stress control to smoothen the electrical field over the connector and screen ends, a conductive heat shrink sleeve to ensure a flaless bond beteen insulation and screen, copper mesh to ensure continuity of the connect shield, and an outer sealing jacket consisting of a heavy all heat shrinkable sleeve, internally coated ith adhesive resulting a moisture and corrosion barrier on the cable oversheath. Cable Joints Sealant Internal moisture seal inhibits migration of moisture Insulation layer elivers consistent insulation thickness ithout field measurement, in a factory-engineered system Insulation thickness should meet or exceed that of the cable Grounding and shielding Ground braid provides continuity across the splice Ground clamp provide secure grounding ithout soldering Shielding mesh surrounds the splice for personnel protection Benefits of SG-Canusa components Rebuild each layer of the cable at the Heat shrinkable adhesive lined tube Adhesive lining provides moisture seal beteen the cable and splice Provides impact- and abrasion-resistance Heat shrinkable stress control tubing Reduces electrical stress to safe opearting levels Stress relief material Minimizes stress around the connector and the shield cutback Semi-conductive layer Reconstructs the cable insulation shield connector and screen cutback: stress control Insulation layer Semi-conductive layer Shielding and grounding Environmental sealing Mechanical protection

52 Automotive Wire Harness Solutions Market Specific Products Automotive Wire Harness Solutions In addition to the standard heat shrink tubing product line, SG- Canusa provides solutions that are designed specifically for the demanding requirements of automotive ire harnesses. For insulation of ground connections, splices or for longitudinal ater sealing of cable harnesses, SG-Canusa delivers tailor-made products of optimum quality. ERAY -Splicemelt-Cap In addition to the ERAY -Splicemelt the longitudinal ater proof sealing of end splices can easily be effected ith the ERAY -Splicemelt-Cap. Available in black and clear and in 4 standard sizes, this product provides an economical and reliable sealing. ERAY -Pressmelt ERAY -Pressmelt is a specially modified sealing system that consists of a modified heat shrinkable sleeve ith an inner adhesive and a push-on profile of thermoplastic adhesive. This system guarantees ithin ide temperature differences absolute sealing and functionality of all sealed cables. It is available for 85 C or 105 C/125 C operating temperatures. ERAY -Pressmelt can be processed using the folloing shrink devices: ERAY -ockman, ERAY -WorkMan, ERAY -KST => ERAY -Pressmelt system provides efficient LONGITUINAL WATER BLOCKING IN SMALL CABLE BUNLES. ERAY -uomelt ERAY -uomelt is the evolution of ERAY -Pressmelt system, combining ERAY -uomelt adhesive strips ith ERAY -IAKT or ERAY -IHKT heat shrink tubing. The adhesive strips are lined ith a strip of butyl rubber to ensure that the adhesive is evenly distributed throughout the bundle and to assist ith the installation. ERAY - uomelt can be processed by standard heat shrink appliances; hoever SG-Canusa suggests the ERAY - WorkMan for bench applications and the ERAY -ockman for iring board applications. => ERAY -uomelt is ideal for providing WATER BLOCKING IN SMALL AN MEIUM CABLE BUNLES. ERAY -Coldmelt I As some insulating materials are very sensitive to heat, SG-Canusa designed ERAY -Coldmelt I, hich uses minimal heat during the installation process and thus ensures that individual bundle components are not damaged during installation. The ERAY -Colmelt I system consists of ERAY -Coldmelt butyl rubber strips to provide a tight seal beteen the individual harness components and a ERAY -CS heat shrink tubing to encase the installation. ERAY -Coldmelt I is processed optimally by the ERAY -SealMan. => ERAY -Coldmelt I is specifically designed to provide LONGITUINAL WATER BLOCKING IN LARGE CABLE BUNLES (UP TO 150 WIRES). ERAY -Splicemelt Crimped and ultrasonically elded parallel and end splices often require longitudinal ater proof sealing as ell high resistance against thermal, chemical and mechanical influences. ifferent sealing applications have these requirements, especially in the automotive sector. ERAY -SPLICEMELT, a specially modified heat shrinkable sleeve ith an inner thermoplastic adhesive, fulfils the requirements of these harsh environments. uring the shrink process the hot melt adhesive flos into all the voids ithin the area to be sealed. The result is a corrosion and aterproof seal. ue to its simple and fast installation the to-in-one shrink tube can be used in continuous production. In general the processing of ERAY -SPLICEMELT is possible on each of the folloing shrink machines: ERAY -SpliceMan, ERAY -SpliceMan IR, ERAY -ockman jr., ERAY -KST and ERAY -FST => ERAY -Splicemelt is the premier SPLICE SEALING system hich satisfies most automotive applications. ERAY -Coldmelt II ERAY -Coldmelt II is based on the reliable, ell-knon and extensively used ERAY -Coldmelt I system. This system substitutes a custom designed grommet for the ERAY -CS heat shrink tubing. The grommet is made up of to half shells hich consist of a sealing component from polyamide (PA) and a moulded part (e.g. socket) from TPE. The special shape of the moulded part guarantees perfect sealing in the area of the car body feedthroughs. The special advantage of this ne system is the possibility to operate the sealing of the cable bundle or iring and the car body feedthroughs at the same time. Processing of ERAY -Coldmelt II is done by the ERAY -Coldmelt II processor. => ERAY -Coldmelt II is likeise specifically designed to provide LONGITUINAL WATER BLOCKING IN LARGE CABLE BUNLES (UP TO 150 WIRES). ERAY -BIOK ERAY -BIOK, the slip-on, non-shrinkable transluscent polyolefin insulating caps ith an integral butyl rubber mastic liner ensures complete electrical insulation for end or stub splices in iring harnesses and electronic assemblies. The caps are quickly installed, as they can be simply pushed on and do not require the addition of heat. Cap installation could thus be readily automated. ERAY -BIOK is resistant to chemicals and fuels and adheres ell to various substrates, including PVC, XLPE and PP-EPM. The continuous operating temperature range of the insulating cap is from 55 C to 85 C or 105 C. 102 You ill find further information about ERAY shrink appliances on pages

53 Automotive Hose and Pipe Solutions Market Specific Products Automotive Hose and Pipe Solutions SG-Canusa has pioneered individual solutions to reliably protect media conducting lines and pipes. SG-Canusa has also developed solutions for protecting components in the engine compartment, undercarriage, passenger compartment or boot against stone impact, abrasion and corrosion. Air conditioning lines, brake lines, fuel lines, oil lines, pneumatic springs, seatbelt clasp fixtures and restraint systems are only some of the typical objects that safely ithstand numerous demands because of heat shrink tubing. ERAY -IAKT NS, ERAY -IBKT This range of adhesive lined heat shrinkable tubes, available in either black or clear, is an ideal solution to prevent corrosion and to protect against stone and gravel damage. Its tough outer jacket also prevents damage to the substrate during installation, fixing or clamping, and servicing. Additionally, it ill not separate from the substrate during bending operations. The continuous operating temperature of this product range is from -55 C to 105 C. => ERAY -IAKT NS, ERAY -IBKT are most suitable for BRAKE PIPES. ERAY -HBNS ERAY -HBNS is a heat shrinkable, polyolefin tube specifically designed to adhere to aluminium pipes in automotive applications. The all material adheres to aluminium during bending operations. ERAY -HBNS provides superior corrosion protection, protects against stone and gravel damage and eliminates noise and vibration. It has a continuous operating temperature from -55 C to 135 C. => This tube provides effective protection of AIR CONITIONING PIPES. ERAY -INS Superior abrasion protection, under extreme temperature, is the primary feature of ERAY -INS. This tube provides excellent adhesion properties and shrinks rapidly in order to avoid damage to the substrate during processing. The tough material of ERAY -INS gives effective reduction of vibration and noise. The continuous operating temperature of ERAY -INS is from -55 C to 135 C. => ERAY -INS is the ideal solution for protecting PRESSURIZE RUBBER HOSES. ERAY -KWS eray -KWS is a heat shrinkable (> 2:1) polyolefin tubing ith excellent abrasion resistance. The ERAY -KWS provides bubble and fold-free shrinkage on manifolds ith an extreme radius. It gives a smooth appearance and shrinks snugly on curves on the substrate during processing. The continuous operating temperature of ERAY -KWS is beteen -55 C and 135 C. => ERAY -KWS is specifically designed to protect COOLING AN HEATING WATER HOSES in automotive applications. ERAY -HB eray -HB is an economical solution for protecting and colour matching of special components. This heat shrinkable tube is characterized by its good abrasion resistance and its customisable colour to match the interior of the car. The continuous operating temperature of ERAY -HB is beteen -55 C and 105 C. => The ERAY -HB is the ideal solution for the protection and colour matching of SEAT BELT STALKS. You ill find further information about ERAY shrink appliances on pages

54 Shrink Appliances Market Specific Products Shrink Appliances In addition to the standard heat shrink tubing product line, SG-Canusa also provides a full range of technically advanced shrink appliances. Years of experience in processing heat shrink materials have resulted in the creation of a variety of processing devices, from a simple heat gun to high performance shrink tunnels. Beyond the numerous standard machines, SG-Canusa can construct custom machines for unique applications. ERAY -SealMan ERAY -SealMan is a process controlled heat shrink appliance specifically designed for ERAY -Coldmelt I applications on a iring board. Similar to other equipment, it is equipped ith separate temperature and time settings. A unique feature for the ERAY -Coldmelt I system is its automatic compression mechanism for the sealing area. All three ERAY -SealMan sizes (35 / 53 / 70) are also available in a bench mount version. ERAY -SpliceMan IR ERAY -SpliceMan IR is a process controlled heat shrink appliance specifically designed for sealing parallel splices ith ERAY -Splicemelt at a ork bench. It features a Controller menu ith 18 pre-adjustable shrink times, and a noise reduced shrinking process. After finishing process the parallel splice is automatically ejected. ERAY -FST 165/600 ERAY -FST 165/600 is a small process controlled shrink tunnel to process heat shrinkable tubing for the insulation or sealing of small cable bundles. The shrink processor can be used as an individual orking station as ell as in series production. The continuously adjustable belt speed control enables consistent quality to be maintained. ERAY -WorkMan 2000 ERAY -WorkMan 2000 is a process controlled heat shrink appliance designed for general purpose shrink applications at a ork bench. It is equipped ith separate temperature and time settings. The device is most often used for the installation of all ERAY standard tubes and ERAY -uomelt, ERAY -Pressmelt, ERAY - Coldmelt Lite sealing systems. Special versions for specific customers demands are also possible. ERAY -Board WorkMan ERAY -Board WorkMan is a process controlled heat shrink appliance specifically designed for ERAY - Splicemelt applications such as parallel splices, end splices and ring terminals on the iring board. It is equipped ith a separate temperature control and three time pre-settings ith start buttons on the orking head. ERAY -HST and HST SG-CANUSA also offers a standard selection of tunnel ovens for hose and pipe applications. These high performance industrial tunnel ovens have been designed for economical series production and are outfitted ith the folloing features: High performance fan Ni-CR heating elements for continuous operations hermetically embedded in stainless steel tubes Rod chain conveyor ith teflonized fibreglass fabric tape High quality heat insulation Very economical energy costs Custom shrink equipment can also be designed and installed for more specialised applications. ERAY -ockman ERAY -ockman is a process controlled heat shrink appliance designed for general purpose shrink applications on a iring board. It is equipped ith separate temperature and time settings. The device is most often used for the installation of all ERAY standard tubes and ERAY -uomelt, ERAY -Pressmelt, ERAY -Coldmelt Lite sealing systems. ERAY -ockman Endsplices ERAY -ockman Endplices is a process controlled heat shrink appliance specifically designed for ERAY - Splicemelt applications on end splices on a iring board. It is equipped ith separate temperature control and three time pre-settings ith start buttons on the orking head

55 istribution Sets & Kits - Customising Market Specific Products istribution Sets & Kits - Customising ERAY -Set Six, ERAY -Set 1000 The SG-Canusa ay to have a ide variety of different sizes, diameters and colours of heatshrink ithout stocking large quantities. SG-Canusa has developed a range of specially configured kits designed to reduce field installation time and improve installation effectiveness. Custom Kitting, Tailored Packaging, ready-to-use Sets, and Blister packs are only a fe products in the broad SG-Canusa range for distributors, craftsmen and do-it-yourselfers. ERAY -Set refill bag The ERAY -Set 2000 combines the advantages of ERAY -Set Six and ERAY -Set 1000 ith the possibilty to refill any emptied compartment ith the ERAY -Tube refill system. ERAY -Box The ERAY -Box, ith four different types of ERAY -tube, gives the do-it-yourselfer a convenient (and environmentally friendly) package for a ide variety of tasks. If you need further information about these products don t hesitate to contact us at: info-uk@dsgcanusa.shacor.com

56 Further information about our special products available on request: PROUCT GROUP Canuflex - Braided Sleeves Identification systems Crimpseal II High Performance Crimp connector Product information ERAY -Boxes & ERAY -Sets SG-Canusa Nesletter Automotive Specials Sealing End Splices Sealing Parallel Splices Sealing Cable Systems Wire Harness Brochure Pipe & Hose Brochure Installation instructions Coldmelt I & Coldmelt II (video) If you are interested please send us an to info-uk@dsgcanusa.shacor.com or call us at:

57 Headquarters SG-Canusa GmbH Heidestrasse Meckenheim Germany Tel.: +49 (0) Fax: +49 (0) info-de@dsgcanusa.shacor.com European offices Office UK Tel.: Fax: info-uk@dsgcanusa.shacor.com Office Poland Tel.: Fax: info-pl@dsgcanusa.shacor.com Office France Tel.: Fax: info-fr@dsgcanusa.shacor.com Office Spain Tel.: Fax: info-es@dsgcanusa.shacor.com Office Italy Tel.: Fax: info-it@dsgcanusa.shacor.com Office Turkey Tel.: Fax: info-tr@dsgcanusa.shacor.com