Shanghai Gongtao Ceramics Co., Ltd.
|
|
- Chad Hall
- 6 years ago
- Views:
Transcription
1 1. Alumina ceramic tubes Gongtao company mainly produce alumina tubes, rods and various industrial ceramic parts, which are mainly used in thermalcouple temperature, liquid steel continous temperature, various industrial furnace(containig vacuum furnace, carburizing furnace, wire furnace, atmosphere furnace etc), especially widely used in petrochemical, spinning, electric, instrumentation, mechanical workout, military project etc industry.our items are various and exported to many countries.welcome to contact us! 1) Specification: Dimension Item Outer dia. mm Inner dia.mm Length mm Remark Thermocouple protection tube Insulated tube Single hole If you need others,we can (inner core) Double holes customize for you. Four holes ) Property of material: AL2O3 conent % Bulk density(g/cm3) Flexural Strength(MPa) Coefficient of linear expansion( 10-6/ )( )
2 Thermal conductivity[w/(m.r)] Insulated strength(kv/mm) Bulk density resistance(ω.cm)20 >1014 >1014 >1014 >1014 >1014 >1014 >1014 > >1013 >1013 >1013 >1013 >1013 >1012 >1010 >1010 Long term operating temperature ( ) Hardness Refractoriness ) Photo: 2. Alumina Rods,Ceramic Rods
3 3. Alumina crucibles Gongtao company can make various crucibles and saggers made of high alumina,with different shapes.and we can also custom based on the requirement. Series: Alumina ceramic crucible Corundum ceramic crucible Arc alumina crucibles(high form alumina crucibles) Cylindrical alumina ceramic crucibles Rectangular crucibles Special shaped crucibles Alumina saggers Fireclay crucibles,zirconia crucible, magnesia crucible Property:
4 Item Alumina crucible Al 2 O 3 99 Chemical component R 2 O 0.2 Fe 2 O SiO Vol.density(g/cm 2 ) 3.80 Apparent Porosity(%) <1 Bending Strength(Mpa) >350 Compression strength (Mpa) >12000 Permittivity (1MH z ) 2 The max.operating temperature 1800 Specification: 5ml 10ml 15ml 20ml 25ml 30ml 50ml 100ml 150ml 200ml-2500ml Main purpose of crucible and sagger is as a container for analysis and firing of material and product applied in various industries. For example: analysis of coal, melting of the metal, Purpose analysis and firing of chemical raw materials, analysis and melting of glass, analysis and firing of rare earth materials and mineral,firing of high temperature items such as ceramic products and melting of single-crystal raw materials. Under normal circumstances,firstly put the items which need to be analyzed and fired into the crucible or sagger.then heat. The speed of heating and drop in temperature are according to Use the characteristics of equipment and products, fast or slow.because of the thermal expansion of raw material which the crucibles and saggers are made of, too quick heating or cooling will easily lead to cracking of the crucibles and saggers.the best way is slowing down,which can prolong the life of them.
5 Photo:
6
7 4. Alumina jar,pot mill,ceramic grinding pot/jar. Alumina ceramic mill pot is a kind of mill pots which has wear-resistance.we can also supply plain ceramic mill pot:99% ceramic mill pot. The spe:0.5 litre,1.2 litre(standing),1.2 litre(lying),3 litre,5 litre,10 litre,20 litre. Al2o3 content: 65%,95%,99% Rockwell hardness 80, impact resistance Water absorption 0.02 Vol.density 3
8 Wear-resistance coefficient 0.9 Application Electrical eramic,magnetic material,pigment and dope,special cement, porcelain enamel and glaze The mill pot produced by gongtao company have monolithic construction,big round arc angle.the mouth of pot can be sealed and opened easily,tight seal,beautiful sculpt,hard and durable.bad phenomena such as gap,leak,material stock,dead space ect can not occur in use.and Gongtao company can also offer you rock bottom price for 65% al2o3 ceramic mill pot. Property:Hard,wear-resistant Purpose:Used in material crush,one part of ball grinding mill. In a word,the mill pot have good chemical stability and wear-resistance.it is used widely in crushing various chemical and industrial products,medicament,rare earth material and various silicate material. We can supply mill ball such as agate mill ball,zirconia mill ball
9 Zirconia grinding jar Ball mill machines: Other zirconia tube,ring,parts
10 Polyamide Jars Grinding balls,alumina balls,zirconia balls,si3n4 balls
11 5. Mortar and pestle Ceramic mortar and pestle Alumina mortar and pestle Agate mortar and pestle
12 6. Ceramic Heating Elements: 1) IR ceramic heater Specification: Size(mm) Shape Power(Kw) Size(mm) Shape Power(Kw) arc flat arc flat arc Φ70 disk flat Φ100 disk arc Φ140 disk flat Φ150 Φ100 Φ60 haff arc flat The components: a.base body:made of ceramic material with good heat shock property. b.heating nature:sintered by high quality nichrome wire. c.glaze:composed of metal oxide material with good far infrared radiated property. d.put right amount of additive and improve radiant intensity and strengthen adaptability of glaze billet Main technical parameter and property:
13 1.Radiated characteristic:the tiptop single color of radiance of element can reach Time of heating response:from room temperature to surface temperature of radiated plate,the fixed time will not exceed 20 minutes. 3.Cold and hot resistance:the base body is heated to 800 C and put in cold water repeatly for many times and no cracking.after cold and hot mutual change test for five times,no peel and no craze. 4. The radiated element is heated after electrifying to rating power and immerged into cold water after interruption of power supply for forty times without damage. 5.Good chemical stability;strong causticity-resistance;perfect oxidation-resistance 6.The heating damage of non radiated surface is small. 7. Resistance in common temperature: ohm 0 cm 8.Uneven degree for radiated surface temperature: 15% 9. Rupture strength for base body: 440Kg/cm2 10.Tolerance of power: 5% at rating working voltage 11.Cold state insulated resistance 500V tramegger>2 mω 12.Thermal state insulated resistance: 500V tramegger>5 mω 13.Using life span: >3000 hours 14.The effect of energy saving is obvious,increasing 10-25% compared with silicon carbide element 15. The life span can prolong more than a few times compared with silicon carbide element. Applying domain: Embedding type ceramic far infrared radiated heating elements are produced based on direct of international advanced technique and many years research,with high conent of technology,good whole property,cleanness & sanitation,convenient assemble,acid-resistance,erodibility-resistance Safe use,long life span ect.widely used in vacuum plastic uptake,food roast, medical treatment and sanitation ect various infrared dryness and roast,solidify ect.they have ideal energy saving effect in the industry such as electron spin,light industry, electromechanical chemical industry, medical treatment,food industry ect and have obvious society benefit and economy benefit.
14
15 2) Ceramic heater element a
16
17
18 3) Flexible Alumina Ceramic Heating Pad 4) Quartz heating element:
19
20
21 5) Accessory:
22 Heater plug
23
24
25 7. Mica product: 8. Other ceramic items 1) Ceramic bearing:
26 2) Ceramic pins
27 3) Ceramic guide pulley 4) Alumina ceramic screws: 5) Honey ceramic
28 6) Ceramic pegs 7) Others
29 Silicon carbide heating element
30 Sic Tube
31 Ceramic parts a.ceramic spark plug Ceramic terminal blocks for thermocouple
32
REFRACTORIES. Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks
Topics REFRACTORIES Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks Definition Substances which can with stand high temperature without
More informationPRODUCT LIST (REFRACTORIES)
PRODUCT LIST (REFRACTORIES) For IRON & STEEL INDUSTRY Coke Oven Silica Bricks Mullite, Mullite-silicon Carbide Bricks for Dry Quenching Fire Clay Bricks Hot Blast Stove Silimanite-Mullite & Andalusite
More informationDense Refractories Product Data
High Property Tabular Alumina Castables Refractory GT-20 GT-20 Max service temp.( C) 1800 Bulk density(g/cm 3 ) 2.95 Typical Min Max Al 2O 3 94.59 94 CaO 1.44 2.0 Fe 2O 3 0.06 0.2 110 C 24h 78.4 1100 C
More informationHIGH TEMPERATURE CERAMIC & GRAPHITE ADHESIVES
HIGH TEMPERATURE & GRAPHITE S Technical Bulletin A2 Ceramabond 835-M bonds halogen lamp. Ceramabond 503 coats heater used to 1700 ºC. Ceramabond 685-N bonds infrared heater. Graphi-Bond 551-RN bonds graphite
More informationHIGH TEMPERATURE FURNACES. High Temperature Chamber Series High Temperature Tube Series High Temperature Elevator Series
HIGH TEMPERATURE FURNACES High Chamber Series High Tube Series High Elevator Series Chamber Furnaces MoS Series MoS series have been used as trusted professional chamber furnaces for many years in laboratories.
More informationInvestigation of Appropriate Refractory Material for Laboratory Electritic Resistrance Furnance
Investigation of Appropriate Refractory Material for Laboratory Electritic Resistrance Furnance Department Of Mechanical Engineering, Federal University of Technology, Minna, Nigeria E-mail: joe_agboola@yahoo.com
More informationI. Materials Properties and Cathode Construction 1 INTRODUCTION 1 THE CARBON LINING 4
Table of Contents Table of Contents I. Materials Properties and Cathode Construction 1 I. Materials Properties and Cathode Construction 1 INTRODUCTION 1 INTRODUCTION 1 THE CARBON LINING 4 THE CARBON LINING..
More informationThermocouple Quick Reference Guide. Aluminium Temperature Sensing Solutions from the Smelter to the Foundry
Thermocouple Quick Reference Guide Aluminium Temperature Sensing Solutions from the Smelter to the Foundry why pyrotek? Pyrotek is a global engineering leader and innovator of technical solutions, integrated
More informationBUREAU OF INDIAN STANDARDS Draft Indian Standard
Doc:MTD 15(5106) For Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard METHOD FOR DETERMINATION OF THERMAL CONDUCTIVITY OF DENSE AS WELL AS INSULATING FIRED REFRACTORIES, REFRACTORY MONOLITHICS
More informationCATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES INSULATING REFRACTORY CASTABLES...
CATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES... 11 INSULATING REFRACTORY CASTABLES... 17 REFRACTORY GUNNING MIX... 20 ASBESTOS-FREE COATING... 23 REFRACTORY
More informationCeramic - Chemical Resistance Acids - concentrated Acids - dilute Alkalis Halogens Metals
Ceramic - Chemical Resistance Acids - concentrated Acids - dilute Alkalis Halogens Metals Fair Good Poor-Fair - Good 62/SiO2 24/B2O3 14 Fair Good Poor-Fair - - 70/SiO2 28/B2O3 2 Good Good Good Good Good
More informationThe research of ceramic materials for applications in the glass industry including microwave heating techniques
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS The research of ceramic materials for applications in the glass industry including microwave heating techniques To cite this article:
More informationExperts in Furnaces. Engineering. Fast and flexible. THERMCONCEPT powerd by innovation
Dental Furnaces Sintering furnaces for Zirkonia Chamber Furnaces for Dental Ceramic Compounds Furnaces for CAD / CAM - Systems Pre-heating Furnaces Muffle Furnaces Model Casting Accessories Experts in
More informationIntroduction to Refractories
Introduction to Refractories Refractories are material having high melting points, with properties that make them suitable to act as heat-resisting barriers between high and low temperature zones. ASTM
More informationSilplateTM Structural Insulating Board. The Revolutionary Lining System For Processing And Transportation Of Molten Metal
SilplateTM Structural Insulating Board The Revolutionary Lining System For Processing And Transportation Of Molten Metal The Silplate TM Lining System Silplate TM is a structural insulation board with
More informationPlatinum Resistance Thermometer (PRT) Selection Guide
Platinum Resistance Thermometer (PRT) Selection Guide hken.rs-online.com (Hong Kong (English)) www.rs-components.com (International) Thermocouple & Platinum Resistance Thermometry - At A Glance Discover
More informationThermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
More informationEngineered Isostatic Ceramics. Specializing in products for the continuous casting of steel
Engineered Isostatic Ceramics Specializing in products for the continuous casting of steel EI CERAMICS LTS with wear band LTS with porous insert Gaskets & Fiber Products TSR TSR HR TON SEN Thin Slab SEN
More informationDr. M. Medraj Mech. Eng. Dept. - Concordia University Mech 421/6511 lecture 13/2
Outline Introduction: Ceramic materials Carbon based materials Applications of ceramics Ceramic Processing Mechanical properties of Ceramics Dr. M. Medraj Mech. Eng. Dept. - Concordia University Mech 421/6511
More informationAVM Ceramics. Metallurgy Paper & Pulp Thermal
AVM Ceramics Metallurgy Paper & Pulp Thermal AVM Ceramics AVM Ceramics GmbH (Advanced Versatile Materials) The demands on an increasing technological advancement in material products worldwide dictates
More informationEXCEL and HIMELT crucibles
EXCE and HIMET crucibles DESCRIPTION EXCE and HIMET are high quality carbon-bonded silicon carbide crucibles manufactured using the latest rollerforming techniques and are designed to cater for a range
More informationtrue grit minerals CUMI lative range of EMD PRODUCT CATALOG 100 years US $ 3 billion 29 companies +30,000 people MURUGAPPA GROUP
MURUGAPPA GROUP 100 years US $ 3 billion 29 companies +30,000 people EMD ELECTRO MINERALS DIVISION CUMI lative range of true grit minerals PRODUCT CATALOG FUSED PRODUCTS MACRO REGULAR BROWN FUSED ALUMINA
More informationFrom Research to Manufacturing
Efforts are being made to increase the operating temperature of low-mass furnaces beyond the current 1700 C limit. Factors which limit the maximum operating temperature of these units, include hightemperature
More informationSpecial Electrically Resistant Heated Furnaces
Special Electrically Resistant Heated Furnaces Drying of Ceramic Components Autor: Roland Waitz, Malte Möller Many ceramic masses are fabricated in plastic or liquid condition by addition of water. In
More informationALL-CERAMIC MATERIALS
ALL-CERAMIC MATERIALS The Comprehensive Guide R-Dent Dental Laboratory 7490 Bartlett Corporate Cove West, Bartlett, TN 38133 901-372-8020 INDEX Page 3 The Importance of a Well-Informed Clinician Page 4
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 8: Forming Processes (Rolling, Extrusion, Forging, Drawing) DR. SOTIRIS L. OMIROU Forming Processes - Definition & Types - Forming processes are those in which
More informationLungmuß Tap Hole Clays
Lungmuß Tap Hole Clays 1 Contents 1. Development of Lungmuß tap hole clays 2. Consistence of Lungmuß tap hole clays 3. Lungmuß tap hole clays: exemplifications 4. Data sheets for the exemplifications 5.
More informationMuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4 Available in coil, sheet, rod, billet, wire, and bar form, MuShield s High Permeability Magnetic Shielding is a soft magnetic
More informationHAWORTH PORCELAIN FLOORING SYSTEM CSI Specifications 03/29/2017. A. Concrete work and concrete floor sealer is specified in Section
SECTION 09 36 00 Dry-Lay Tile PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Concrete work and concrete floor sealer is specified in Section 03 30 00. B. Tiling as specified in Section 09 30 00. 1.2 SUMMARY
More informationEconomic Wear Protection For the Iron and Steel Industry Worldwide
Issue 07.06 www.kalenborn.de Economic Wear Protection For the Iron and Steel Industry Worldwide Reduce Costs and Avoid Downtime Large quantities of bulk material are handled in the conveying and storing
More informationZYBF. High Temperature Yttria Stabilized Zirconia Fibers. Advanced Fibrous Ceramics
Advanced Fibrous Ceramics ZYBF High Temperature Yttria Stabilized Zirconia Fibers The Unrivaled Industry Leader of ZrO 2 Insulation Three Product Types ZYBF-1 (7.5 pcf) ZYBF-2 (21 pcf) ZYBF-5 (16 pcf)
More informationCurrent Refractory Technology and Practices in the Steel Industry
Current Refractory Technology and Practices in the Steel Industry April 26, 2017 Rakesh K. Dhaka 2016 Steel Production in Numbers United States 4 th largest producer of steel in the world Source: World
More informationCERAMICS. (related only to traditional ceramics): Materials made of clays and hardened by fire
CERAMICS Original definition: (related only to traditional ceramics): Materials made of clays and hardened by fire Actual definition: Inorganic non-metallic heterogeneous materials with structure composed
More informationMetal Transitions HIGH TEMPERATURE
Metal Transitions High Temperature Thermal Solutions of Texas continues to meet the demands of technological advances by developing thermocouples using materials with unusually high performance characteristics
More informationApplication Guide for Ceramic Components Used in Domestic & Industrial Pumps
Application Guide for Ceramic Components Used in Domestic & Industrial Pumps Shafts, Seals & Bearings www.morganadvancedmaterials.com Overview Morgan Seals & Bearings Bearing Aluminium oxide Silicon carbide
More informationConsumables Listing for LECO FP-2000 / NS-2000 / CN-2000 and CNS Part No. CHOICE Description Unit of Sale
Consumables Listing Listing of Equivalent Items available from CHOICE ANALYTICAL for use on:- FP-2000 Consumables Listing for FP-2000 / NS-2000 / CN-2000 and CNS-2000 In Seq. of CHOICE Description Unit
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.
More informationDe Montfort Mark 7 Incinerator (Flatpack)
De Montfort Mark 7 Incinerator (Flatpack) Introduction This design is specially for those occasions when a large number of incinerators are to be built at one location and transported to the places where
More informationIndex. Automotive engines, silicon nitride products development, 83-94
Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,
More informationPROTECTING REFRACTORIES AGAINST CORUNDUM GROWTH IN ALUMINUM TREATMENT FURNACES. C. Allaire and M. Guermazi
PROTECTING REFRACTORIES AGAINST CORUNDUM GROWTH IN ALUMINUM TREATMENT FURNACES C. Allaire and M. Guermazi CIREP-CRNF, Dept. of Eng. Physics & Materials Engng., Ecole Polytechnique (CRIQ campus), 8475 Christophe
More informationNickel Based Superalloy Incoloy 800 (UNS N08800)
Nickel Based Superalloy Incoloy 800 (UNS N08800) Nickel-Iron-Chromium alloy Incoloy 800 has fine strength and suitable resistance to oxidation and carburization at high temperatures. It offers elevated
More informationThermocouple cable and assemblies ENCLAD
Thermocouple cable and assemblies ENCLAD ENCLAD thermocouples Introduction BASF ENCLAD thermocouple products are a precise and rigorously controlled combination of select precious and base metal sheaths,
More informationCasting. Forming. Sheet metal processing. Powder- and Ceramics Processing. Plastics processing. Cutting. Joining.
Traditional Manufacturing Processes Casting Forming Sheet metal processing Powder- and Ceramics Processing Plastics processing Cutting Joining Surface treatment FUNDAMENTALS OF METAL FORMING Overview of
More informationEconomic Wear Protection in Coal fired Power Plants Worldwide
Issue 03.06 Economic Wear Protection in Coal fired Power Plants Worldwide www.kalenborn.de A typical application in power plants is pulverized fuel piping, here protected by ABRESIST Reduce Costs and Avoid
More informationAPPC PDH/PP PROJECT 8 CATOFIN REACTORS - JUBAIL SAUDI ARABIA ENGINEERING, DESIGN AND INSTALLATION OF REFRACTORY LINING
ctive owners. names mentioned herein may be trademarks or trade names of their respec APPC PDH/PP PROJECT 8 CATOFIN REACTORS - JUBAIL SAUDI ARABIA ENGINEERING, DESIGN AND INSTALLATION OF REFRACTORY LINING
More informationSHORT FIBRE RIGID INSULATION AND SOFT FELT
TECHNICAL GUIDE SHORT FIBRE RIGID INSULATION AND SOFT FELT SHORT FIBRE AND SOFT FELT FOR THERMAL INSULATION FOR FURNACE WORKING UNDER VACUUM OR INERT GAS + THE RIGHT ENGINEERED SOLUTION ADAPTED TO YOUR
More informationGeneral Requirements. Technical Specifications for Insulators of Transmission Lines
Islamic Republic of Iran Vice Presidency for Strategic Planning and Supervision General Technical Specification and Execution Procedures for Transmission and Subtransmission Networks Insulators of Transmission
More information9. CLAY BRICKS. TOTAL Clay Bricks 1
9. CLAY BRICKS TOTAL 24 7. Clay Bricks 1 Introduction Building units which are easily handled with one hand. By far the most widely used size at present is the brick of 300 mm x 200 mm x 100 mm (length,
More informationThe Convenience Stores For Metal
TOOL STEEL SELECTOR GUIDE Application Suggested Grades Arbors... O1, A2, A6 Battering Tools... S5, S1, S7 Blacksmith Tools... S5, S1 Boiler-Shop Tools... S5, S1, S7 Bolt Clippers... S5, S1 Boring Tools...
More informationChemistry 145 Exam number 4 name 11/19/98 # Faraday s constant is 96,500 c/mole of electrons.
Chemistry 145 Exam number 4 name 11/19/98 # Faraday s constant is 96,500 c/mole of electrons. A.(16) An electrochemical cell is prepared with a strip of manganese metal dipping in to a 1.0 M MnSO 4 solution
More informationBulk Deformation Processes
Bulk Deformation Processes Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 TOPIC OUTLINE What is Bulk Deformation? Classification of Bulk Deformation Processes Types
More informationPART MATERIAL REMARK Metal Case with Pig-tail. Brass (Metal Case) Copper (Pig-tail) Star Contact Copper Silver Plated
1. SCOPE This specification defines the technical requirements of TZ-D series thermal-link with PROFFUSE brand that are produced according to IEC 60691, UL 60691,GB 9816. 2. APPLICABLE STANDARDS IEC 60691,
More informationMSE-226 Engineering Materials
MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon
More informationA Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique
A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique.Satyanarayen 1, Dominic Roystan 2, M.Shreesaravanan 3 Balaguru 4, C.Devanathan 5 1,2,3,4 UG Students,
More informationMaterial for a pressure vessel Short term thermal insulation Energy efficient kilns
More Case Studies in Materials Selection Material for a pressure vessel Short term thermal insulation Energy efficient kilns More info: Materials Selection in Mechanical Design, Chapters 5 and 6 ME 474-674
More informationELECTRICAL RESISTIVITY AS A FUNCTION OF TEMPERATURE
ELECTRICAL RESISTIVITY AS A FUNCTION OF TEMPERATURE Introduction The ability of materials to conduct electric charge gives us the means to invent an amazing array of electrical and electronic devices,
More informationCal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series
Thick Film Chip Resistors - RM Series Fixed Chip Resistors manufactured for more compact electronic components and automatic mounting system. These Chip Resistors have electrical stability and mechanical
More informationInfluence of Solid CaO and Liquid Slag on Hot Metal Desulfurization
, pp. 10 17 Influence of Solid CaO and Liquid Slag on Hot Metal Desulfurization Koichi TAKAHASHI, 1) Keita UTAGAWA, 2) Hiroyuki SHIBATA, 3) Shin-ya KITAMURA, 3) Naoki KIKUCHI 4) and Yasushi KISHIMOTO 5)
More informationUddeholm Formvar. FORMVAR is a trade mark registered in the European Union
Uddeholm Formvar FORMVAR is a trade mark registered in the European Union UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright
More informationPROPERTIES OF MATERIALS PART HARDNESS
CHAPTER 3 PROPERTIES OF MATERIALS PART 2 30.07.2007 3.1.10 HARDNESS A Resistance to permanently indenting the surface Large hardness means resistance to plastic deformation or cracking In compression,
More informationBearings for Extreme Special Environments - Part 3 Basic Performance of Ceramic (Silicon Nitride) Bearings
Bearings for Extreme Special Environments - Part 3 Basic Performance of Ceramic (Silicon Nitride) Bearings H. TAKEBAYASHI * *Bearing Engineering Center, EXSEV Engineering Department Outlines of Koyo EXSEV
More informationNotes Changed note Date. 1 (A) Changed template 09 / 07 / 2008
Revisions Notes Changed note Date 1 (A) Changed template 09 / 07 / 2008 2 Changed template. Clause 12.5.4.1 hot-rolled steel added. Clause 12.5.4.2, 12.5.2.4, 12.5.3.4, 12.5.4.4, 12.5.5.4, 12.5.6.4, 12.5.7.4
More informationPRODUCT OVERVIEW. Kanthal Furnace products and Heating systems
PRODUCT OVERVIEW Kanthal Furnace products and Heating systems PRODUCT OVERVIEW Kanthal electrical heating systems Kanthal electrical heating systems deliver significant reductions in energy consumption
More informationCeramics are inorganic, non-metallic. Ceramics. Ceramics exhibit ionic, covalent bonding or a combination of the two (like in Al 2 O 3 )
What are Ceramics? CERAMIC MATERIALS Ceramics are inorganic, non-metallic and crystalline materials that are typically produced using clays and other minerals from the earth or chemically processed powders
More informationCeramic Components. Innovative in Ceramics.
Ceramic Components Innovative in Ceramics www.vogt-ceramic.de VOGT Ceramic Components DESIGN For more than 35 years, VOGT GmbH has been manufacturing technical ceramic components. Our many years of experience
More informationMECHANICAL AND PHYSICAL PROPRIETIES
Kera-Coat Ceramic Coatings are Special Ceramic Coating defined as a substantially vitreous or glassy inorganic coating bonded to metal by fusion at a temperature above 800 F. In this short abstract we
More informationHigh Temperature Ceramics for Light-Weight Kiln Furniture
TECHNOLOGY INSIGHTS High Temperature Ceramics for Light-Weight Kiln Furniture Alumina- and mullite-based materials for kiln furniture application of up to 1700 C have been successfully developed. The materials
More informationINSULATED ELEMENT TWIST WELD DUPLEX INSULATED TIG WELD 1 1/2 NOMINAL ORDER CODES. INSULATOR DIMENSIONS (inches) SINGLE DUPLEX
Straight Base Metal Thermocouple Elements The straight base metal thermocouple elements illustrated on this catalog page are replacement elements for use in Pyromation's complete industrial thermocouple
More informationPRECISION POLYURETHANES
Company Profile: We at PRECISION POLYURETHANES manufacture and supply various types of Hi - Performance Cast Polyurethane components and other polyurethane products engineered for multipurpose industrial
More informationSTUDY ON SLAG RESISTANCE OF REFRACTORIES IN SUBMERGED ARC FURNACES MELTING FERRONICKEL
STUDY ON SLAG RESISTANCE OF REFRACTORIES IN SUBMERGED ARC FURNACES MELTING FERRONICKEL Dong HU 1 Pei-Xiao LIU 2 Shao-Jun CHU 1 1 School of Metallurgical and Ecological Engineering, University of Science
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II Hot & Cold Working - Drawing & Extrusion Drawing Drawing is an operation in which the cross-section of solid rod, wire or tubing is reduced or changed in shape by pulling
More informationPowder Metallurgy. Science, Technology. and Materials. Anish Upadhyaya. G S Upadhyaya. Department of Materials Science and Engineering
Powder Metallurgy Science, Technology and Materials Anish Upadhyaya Associate Professor Department of Materials Science and Engineering Indian Institute of Technology Kanpur, India G S Upadhyaya Former
More informationDifferential Scanning Calorimetry DSC 404 F1
Differential Scanning Calorimetry DSC 404 F1 DSC 404 F1 Pegasus - Introduction to the Method leading manufacturer of highperformance thermal analysis systems flexible, sophisticated and tomers wishes and
More informationQuartz Glasses. Types of Glass. Application. Physical and Chemical Properties. Forms of Product. SEE THE WORLD IN A NEW LIGHT Stand: 2/13
Types of Glass Application Physical and Chemical Properties Forms of Product Stand: 2/13 NOTE: All data in this product information brochure are general product specifications and not binding definition
More information2
1 2 3 4 5 6 7 Direct -Straightforward steady forward force by hydraulic ram Indirect -Has the advantage that there is no friction between billet and chamber (no movement) -Note dummy block at face of ram
More informationEFFECTS OF LIGHTWEIGHT MULLITE-SILICA RICH GLASS COMPOSITE AGGREGATES ON PROPERTIES OF CASTABLES
Original papers EFFECTS OF LIGHTWEIGHT MULLITE-SILICA RICH GLASS COMPOSITE AGGREGATES ON PROPERTIES OF CASTABLES YUANYUAN LI, # NAN LI, WEN YAN The Key State Laboratory Breeding Base of Refractories and
More informationCutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
More informationMineral Solutions for Technical Ceramics
Mineral Solutions for Technical Ceramics Imerys Ceramics, your partner for performing Technical Ceramic solutions Imerys Ceramics uses its unrivalled product portfolio, commercial and technical expertise
More informationBN200 Series Boiler Water Level Gauge
Overview The BN200 series is bi-color boiler water level gauge designed mainly for extremely high-pressure drums. The gauge meets ASME Section I Power Boiler requirements, using high quality material and
More informationHIGH TEMPERATURE CERAMIC ADHESIVES & PASTES
HIGH TEMPERATURE CERAMIC ADHESIVES & PASTES Technical Bulletin A A Aremco s high temperature ceramic adhesives are unique inorganic formulations for bonding and sealing ceramics, metals, quartz, graphites,
More informationAISI D2 Cold work tool steel
T OOL STEEL FACTS AISI D2 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationTypes Of Extrusion. FIGURE 6.49 Types of extrusion. (a) direct; (b) indirect; (c) hydrostatic; (d) impact.
Types Of Extrusion FIGURE 6.49 Types of extrusion. (a) direct; (b) indirect; (c) hydrostatic; (d) impact. Extrusion of Seamless Tube FIGURE 6.60 Extrusion of a seamless tube. The hole in the billet may
More informationSolutions in Steel Innovative Technologies for Smart Solutions
Solutions in Steel Innovative Technologies for Smart Solutions Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established
More informationHigh Performance Products. for Technical Ceramics
High Performance Products for Technical Ceramics The requirements of Technical Ceramics are very complex. By successfully using high performance materials from Saint-Gobain Ceramics integrated ceramic
More informationPoDFA The complete solution for inclusion measurement Inclusion identification and quantification analysis
Measurement & Analytics Measurement made easy PoDFA The complete solution for inclusion measurement The complete solution for inclusion measurement Today s global marketplace has compelled aluminum producers
More informationTeam Work - Failure Case Studies
Team Work - Failure Case Studies Dr. rer. nat. Andreas Buhr, Almatis GmbH, Frankfurt Seminar: Refractory Technology Applications, Wear Mechanism, Failures Steel Academy Steel Institute VDEh PO box 104842
More informationYou expect the highest levels of versatility and reliability. We do too.
You expect the highest levels of versatility and reliability. We do too. Porcelain Perfect for every porcelain. Whip Mix porcelain furnaces are considered some of the most reliable furnaces in the industry.
More informationSchunk Innovative Insulation Materials. Schunk Kohlenstofftechnik GmbH
Schunk Innovative Insulation Materials Schunk Kohlenstofftechnik GmbH Thermal Insulation at High Temperatures Carbon and Graphite Felt As a manufacturer of graphite felt for insulation in high-temperature
More information094: 2000 CEB STANDARD. MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA
094: 2000 CEB STANDARD MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEYLON ELECTRICITY BOARD SRI LANKA Specification for MEDIUM VOLTAGE PIN INSULATORS & HARDWARE (12kV & 36 kv) CEB Standard
More informationThe Element Carbon. Diamond & Derivates. Fullerene & Nanotubes. Graphite & Derivates
The Element Carbon 6 C 12.01 Diamond & Derivates Graphite & Derivates Fullerene & Nanotubes SGL Group 2007: Sales: 1373 mio. Employees: 5862 Net profit: 131 mio. R&D costs: 30 mio. Supplier (Gr. Powder...)
More information1. 3 Extrusion molding
1. 3 Extrusion molding 9 Extrusion is a widely used technique, both in the field of traditional and technical ceramics. This method allows the continuous manufacture of products with a constant cross-
More informationCERAMIC MATERIALS I. Asst. Prof. Dr. Ayşe KALEMTAŞ. Office Hours: Thursday, 09:30-10:30 am.
CERAMIC MATERIALS I Office Hours: Thursday, 09:30-10:30 am. akalemtas@mu.edu.tr, akalemtas@gmail.com, Phone: 211 19 17 Metallurgical and Materials Engineering Department CLASSIFICATION OF CERAMICS Ceramic
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More information4 RESISTANCE THERMOMETRY
4.1 4 RESISTANCE THERMOMETRY PRINCIPLES AND APPLICATIONS OF RESISTANCE THERMOMETERS AND THERMISTOR Resistance thermometers and Thermistor are temperature sensors, which changes there electrical resistance
More information1E5 Advanced design of glass structures. Martina Eliášová
1E5 Advanced design of glass structures Martina Eliášová List of lessons 1) History, chemical, production 2) Glass as a material for load bearing structures 3) Design of laminated plates 4) Design of glass
More informationDSC differential scanning calorimeter (DSC)
THERMAL ANALYZERS DSC- 2200 differential scanning calorimeter (DSC) Product introduction: DSC is designed to determine the inner heat transition relating to temperature and heat flow, it is widely used
More informationMechanical behavior of crystalline materials- Comprehensive Behaviour
Mechanical behavior of crystalline materials- Comprehensive Behaviour In the previous lecture we have considered the behavior of engineering materials under uniaxial tensile loading. In this lecture we
More informationRefractory Ceramic Fiber
www.aislamientosyrefractarios.com Refractory Ceramic Fiber September 10, 2009 Agenda Refractory Ceramic Fiber Typical Characteristics Types of RCF Products Specifications Applications Emisshield / Ceramic
More informationMagnesia-carbon refractories for the lining of gasification chambers: technical capabilities and limitations
Magnesia-carbon refractories for the lining of gasification chambers: technical capabilities and limitations M. Hampel*, P. Gehre, T. Schemmel, C.G. Aneziris 5th International Freiberg Conference on IGCC
More information