Grivory HT Enhanced performance at high temperature. Grivory GV The reliable product for metal replacement
|
|
- Roland Stewart
- 5 years ago
- Views:
Transcription
1 Grivory GV The reliable product for metal replacement Grivory HT Enhanced performance at high temperature Grivory GV HT Product Presentation HAR-June 2004e Page 0
2 Product Description Grivory GV Grivory GV is a semi-crystalline thermoplastic engineering material based on polyamide with partially aromatic components. Grivory GV is glass-fibre reinforced and especially suitable for the production of technical parts by injection moulding. Grivory GV is characterised by: High Stiffness and Strength Good Dimensional Stability also after moisture absorption Grivory GV HT Product Presentation HAR-June 2004e Page 1
3 Replacing Die-Cast Metals With Grivory Grivory GV HT Product Presentation HAR-June 2004e Page 2
4 Which Metals can be Replaced by Grivory? Tensile Strength [MPa] Steel Ck45 Zinc ZnAl4Cu1 Brass CuZn37Pb Magnesium MgAl9Zn1 Aluminum AlSi7Mg Grivory GV-6H Grivory GV HT Product Presentation HAR-June 2004e Page 3
5 Grivory Offers Cost Savings due to Longer Service Life of the Tool Grivory GV Zinc Aluminum Magnesium Number of shots (x1000) Grivory GV HT Product Presentation HAR-June 2004e Page 4
6 Grivory can be Custom Colored Grivory can yield cost savings by eliminating finish painting or powder coating. Grivory GV HT Product Presentation HAR-June 2004e Page 5
7 Grivory Offers Improved Resistance to Chemicals that Attack Die-Cast Metals Salts Base Zinc Chloride Sodium Chloride Magnesium Chloride Sodium Hydroxide Grivory can yield cost savings by eliminating the need for protective coatings such as anodizing or oxide plating. Grivory GV HT Product Presentation HAR-June 2004e Page 6
8 Grivory can be Metalized! Physical Vapor Deposition (PVD- process) Metal is evaporated under vacuum and forms a thin layer on the part. Most plastics can be plated using this approach. Galvanic Copper - Nickel Electroplating The most durable and desirable approach in which a galvanic copper substrate is deposited upon the plastics surface. Nickle and chrome layers are deposited upon the copper base to yield a durable high luster surface. Painting with conductive lacquer or urethane Painted with metal-powder filled "clear" paints for electromagnetic shielding. Typically done with copper, nickel and silver. Grivory GV HT Product Presentation HAR-June 2004e Page 7
9 Metal Replacement with Grivory can Result in 30-50% More Profit Grivory enables cost-saving due to: Less work. No surface treatment. Lower freight charges. Longer tool service life. deflashing, sand-blasting, cleaning, annealing etc. is not necessary like painting or corrosion protection cost per unit weight / unit volume up to five times Grivory GV HT Product Presentation HAR-June 2004e Page 8
10 Grivory GV-5H Replaces Zinc Die-Cast Linear Gear Drive Housing Material Weight Post treatment Total cost per part Zinc die-cast 1.15 kg - Boring the bearing seat - cutting of five threads - painting in three colors US $ 8.15 Grivory GV-5H 0.27 kg - not necessary - directly molded - colored EMS material US $ % cost reduction means profit increase of (US) $670,000 (150,000 parts/years) Grivory GV HT Product Presentation HAR-June 2004e Page 9
11 Grivory GV-5H Replaces Aluminum Die-Cast Tachometer Housing Material Weight Material cost/part Tool costs Parts/tool Number of tools Tool costs/part Post treatment Aluminum die-cast 0.36 kg $0.64 $ 88,000 (US Dollars) 100,000 5 $ 0.88 US Dollars) milling, boring and turning Grivory GV-5H 0.21 kg $1.47 $ 88,000 (US Dollars) 500,000 1 $ 0.18 (US Dollars) none 45 % cost reduction (500,000 parts in 5 years) Grivory GV HT Product Presentation HAR-June 2004e Page 10
12 When Should Grivory be Considered for Metal Replacement? Structural rigidity and dimensional stability are required. Weight reduction. Reduce or streamline the number of manufacturing steps. Improve corrosion resistance. Significantly increase the service life of your tooling. Desire to save money via reducing the total manufacturing cost of the product. Grivory GV HT Product Presentation HAR-June 2004e Page 11
13 When Should Grivory be Considered for Metal Replacement? Grivory GV HT Product Presentation HAR-June 2004e Page 12
14 When Should Grivory be Considered for Metal Replacement? Grivory GV HT Product Presentation HAR-June 2004e Page 13
15 When Should Grivory be Considered for Metal Replacement? Grivory GV HT Product Presentation HAR-June 2004e Page 14
16 When Should Grivory be Considered for Metal Replacement? Grivory GV HT Product Presentation HAR-June 2004e Page 15
17 When Should Grivory be Considered for Metal Replacement? Grivory GV HT Product Presentation HAR-June 2004e Page 16
18 Grivory GV HT Product Presentation HAR-June 2004e Page 17 Strength in Detail
EMS-Grivory Material Technology. Metal Replacement With Engineering Polyamides. Ron Hamilton [Consultant] EMS-Grivory UK
EMS-Grivory Material Technology Metal Replacement With Engineering Polyamides Ron Hamilton [Consultant] EMS-Grivory UK Gjorvik 19 th September, 2013 BACKGROUND FACTS Ex-EMS-Grivory UK Marketing [12 Years]
More informationMETHODS OF COATING FABRICATION
METHODS OF COATING FABRICATION Zbigniew Grzesik http://home.agh.edu.pl/~grzesik Department of Physical Chemistry and Modelling DEFINITION The coating is the thin outer layer of the object, which physiochemical
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More informationSuperChrome PVD Coating
SuperChrome PVD Coating Gary Vergason, Michael Brazil, Mark Fitch, Rick Smith ITB Smart Automotive Surfaces September 28-29, 2016 SUPERCHROME Sept 2016 page 1 Vergason Technology, Inc. Design, assembly,
More informationPRIREV. ZI Vagos, lote
2017 PRIREV We are the only Portuguese company that provides Decorative PVD services in several business areas. Our mission is make our partners more competitive in their markets with higher added value
More informationTECHNICAL DATA SHEET GRIVORY GV-5H NATURAL
TECHNICAL DATA SHEET GRIVORY GV-5H NATURAL Product description Grivory GV-5H natural is a 50% glass-fibre reinforced engineering thermoplastic material based on a combination of semicrystalline Polyamide
More informationSuperChrome PVD Coating
SuperChrome PVD Coating Gary Vergason, Michael Brazil, Mark Fitch, Rick Smith SPE Decorating & Assembly TopCon June 18-20, 2017 SUPERCHROME Sept 2016 - page 1 Vergason Technology, Inc. Design, assembly,
More informationSMART Wind Consortium Subgroup Virtual Meeting:
SMART Wind Consortium Subgroup Virtual Meeting: Composite Materials and Process Opportunities Bob Bechtold 7-29-2015 Opportunities to Improve Manufacturing Metal to Plastic Conversion Injection Molding
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More informationElectroplating, Anodizing & Metal Treatment Hand Book
Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:
More informationElectroless nickel has been shown to replace some hard chrome applications with less machining after plating with similar hardness after baking.
Replacements Electroless nickel has been shown to replace some hard chrome applications with less machining after plating with similar hardness after baking. Some other type deposits have also proven successful
More informationLecture 16: Surface Processing
MSE 440/540: Processing of Metallic Materials Instructors: Yuntian Zhu Office: 308 RBII Ph: 513-0559 ytzhu@ncsu.edu Lecture 16: Surface Processing Department of Materials Science and Engineering 1 Surface
More informationInnovative, decorative grills & Screens
Innovative, decorative grills & Screens Sales@niduae.com Aluminum Stainless Steel Copper Brass MR Composite panels PVC FOrex Gypsum CNC Cut Laser Cut Waterjet Cut Najib Build Maint T +971-6-7430267 M +971-55-9446222
More informationContents. Preface. Lightweight Materials Understanding the Basics F.C. Campbell, editor
Lightweight Materials Understanding the Basics F.C. Campbell, editor Copyright 2012 ASM International All rights reserved www.asminternational.org Contents Preface ix CHAPTER 1 Introduction and Uses of
More information" Understanding your scheduling can save time and money
" Understanding your scheduling can save time and money The Specialists Galvin Machined Castings is a division of Galvin Engineering which was formed in 1930. Our foundry incorporates a highly experienced
More informationTECHNICAL DATA SHEET GRIVORY HTV-4X1 NATURAL
TECHNICAL DATA SHEET GRIVORY HTV-4X1 NATURAL Product description Grivory HTV-4X1 natural is a 40% glass-fibre reinforced engineering thermoplastic material based on a semi-crystalline, partially aromatic
More informationMold Design. Note. 13. Mold Manufacturing Techniques. Bong-Kee Lee School of Mechanical Engineering Chonnam National University.
13. Mold Bong-Kee Lee Chonnam National University Note material removing methods machining electrical discharge machining (EDM) electro chemical machining (ECM) electro chemical and chemical etchings laser
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More information# Core Competency Description. Revision: February 19, 2010 Page 1
Supplier: Date Completed: Supplier Contact: Completed By: VCR Sections: I. Core Competencies II. Engineering Capabilities III. Measuring IV. Manufacturing Technologies/Capabilities V. Gaging and Testing
More informationASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
More informationROBOZE PEEK 3D PRINTING
ROBOZE PEEK 3D PRINTING METAL REPLACEMENT UPGRADING GLOBAL ADDITIVE MANUFACTURING ROBOZE TECHNICAL AREA METAL REPLACEMENT UPGRADING GLOBAL ADDITIVE MANUFACTURING Industry Overview As we embark to the journey
More informationPowerOak W400 Marine Wind Generator
PowerOak W400 Marine Wind Generator PowerOak W400 wind turbine system is one of the most successful small wind generator system in the international markets. The main superiority of this 300W small wind
More informationDuPont Superstructural Web Seminar
DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT February 28, 2006 DuPont Superstructural Web Seminar PUSHING BACK THE BARRIERS TO METAL REPLACEMENT The information and
More informationHAND BOOK OF ELECTROPLATING ANODIZING & SURFACE FINISHING TECHNOLOGY
HAND BOOK OF ELECTROPLATING ANODIZING & SURFACE FINISHING TECHNOLOGY Principles of Electroplating The Electro Chemical Series Electrodeposition Electrochemical Terms Using a Copper Anode Using an Inert
More informationLow frequency magnetic shielding: Nanocrystalline coating vs. ferromagnetic foils.
Low frequency magnetic shielding: Nanocrystalline coating vs. ferromagnetic foils. Nanovate -EM is an innovative direct coating technique proven to be a value-add alternative to conventional foils. Magnetic
More informationAluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.
*The following information is only to be used as a guide. Final decision of material type will be made by qualified Berks Container Recovery employees. If you have a material that you would like to recycle
More informationAluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.
*The following information is only to be used as a guide. Final decision of material type will be made by qualified Berks Container Recovery employees. If you have a material that you would like to recycle
More informationMid Temperature Black Oxide Finish for Steel Premium Grade Deep Rich Black Oxide Smut Free No Boiling Caustic Fumes
Mid Temperature Black Oxide Finish for Steel Premium Grade Deep Rich Black Oxide Smut Free No Boiling Caustic Fumes What is KOOL-BLAK 225? KOOL-BLAK 225 is a chemical solution which converts the surface
More informationFluoroSyl 880. Surface Preparation
FluoroSyl 880 FluoroSyl is a hydrophobic and oleophobic perfluoropolyether derivative. FluoroSyl provides long-lasting, anti-fouling, anti-fingerprint and anti-smudge properties to properly prepared surfaces.
More information1 Introduction and History Introduction Origins and history Aluminium Gold bronze Copper 8
Contents 1 Introduction and History 3 1.1 Introduction 3 1.2 Origins and history 4 2 Metal Pigment Types 7 2.1 Aluminium 7 2.2 Gold bronze 8 2.3 Copper 8 2.4 Nickel 8 2.5 Stainless steel 9 2.6 Zinc 9 2.7
More information1-Materials Science & Materials Engineering
1-Materials Science & Materials Engineering 1-1-Structure & Properties Relationship (Materials Science or Materials Engineering) Processing Structure Properties Performance Sub Atomic Atomic Sub Atomic
More informationCONCRETE STEPS, HANDRAILS, AND SAFETY RAIL
CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL PART 1 - GENERAL 1.01 SECTION INCLUDES A. Concrete Steps B. Handrails C. Safety Rail 1.02 DESCRIPTION OF WORK A. Construction of concrete steps. B. Furnishing
More informationDECO AND SPORT THE SURFACE ENGINEERS
DECO AND SPORT THE SURFACE ENGINEERS We are the leader in decorative coatings, you get the benefits Decobond Coatings for a Clean and Lasting Finish +b 40 35 30 25 20 15 10 5 Silver Nickel 70 < L* < 80
More informationMachines and facilities
Your supplier for: High-precision mechanical engineering Components Surface treatment Technologies Page Milling 3 Turning 4-5 Grinding 6-7 Measurement 8-9 Surface treatment 10-13 Anodizing Electroplating
More informationBeechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform
Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:
More informationLuminOre. Composite Metals. Product Information. Changing the way the World Works With Metal TM. Storyland Studios Lake Elsinore, CA
Storyland Studios Lake Elsinore, CA LuminOre Composite Metals Changing the way the World Works With Metal TM Tumasek Pewter Malaysia Product Information Overview Storyland Studios Lake Elsinore, CA L uminore,
More informationThe Perfect Combination For High Durability Eye Frames: Base Material Combined With Deformation Technology And Vacuum Coatings
www.protectim.com The Perfect Combination For High Durability Eye Frames: Base Material Combined With Deformation Technology And Vacuum Coatings Ph.D. Angela Bertuna Process Engineer WHO WE ARE? An Italian
More informationIndex & Cam Plungers +44 (0) / / A05.1 Index & Cam Plungers 1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A05.1 Index & Cam s +44 (0) 117 916 0090 / sales@rencol.com / www.rencol.com A05.1 Index & Cam s 1 I N D U S T R I A L M A N
More informationProduct Datasheet. Fire Hose Reel (Page 3)
Product Datasheet Fire (Page 2) Fire Hose Reel (Page 3) Flush Type Hose Reel Cabinet (Page 4) GRP Fire cabinets are used for indoor and outdoor application with weatherproof and antistatic properties,
More informationProduct-Info 3D-MID. 1. Introduction. 2. Material and manufacturing process. 1/5
Product-Info 3D-MID 1. Introduction The term 3D-MID (3D moulded interconnect devices) stands for injectionmoulded, three-dimensional circuit carriers that have been in use for many years in various fields
More informationSTEEL FINISH COATING SYSTEMS. Meeting Steel Design Specifications for Pole Finishes
STEEL FINISH COATING SYSTEMS Meeting Steel Design Specifications for Pole Finishes delivering diverse resources We provide the highest level of service FINISH COATING SYSTEMS STEEL THE VALMONT PROMISE
More informationFACT SHEET. Introduction
Materials Aluminium Introduction Aluminium performs well in both mechanical and electrical applications. For mechanical applications, aluminium can provide a high strength to weight ratio, ease of manufacture
More informationPhone: +49 (0) 231 / Fax: +49 (0) 231 / Spring hinges. Art.: 6164 Art.
hinges Art.: 6062 Art.: 6063 Art.: 6064 Art.: 6065 Art.: 6066 Art.: 6067 Art.: 6068 Art.: 6164 Art.: 6165 Art.: 6166 Art.: 6105 Art.: 6169 Art.: 6167 Art.: 6486 Art.: 6088 Art.: 6872 Art.: 6876 F-41 hinges
More informationAutomotive. Bakelite Engineering Thermosets for Durable, Lightweight Pulleys. Application Bulletin. Key Benefits
Application Bulletin Automotive Bakelite Engineering Thermosets for Durable, Lightweight Pulleys As the automotive industry reduces vehicle weight and increases engine efficiency in order to comply with
More informationList of Machinery. Your supplier for: High-precision mechanical engineering Components Surface treatment
Your supplier for: High-precision mechanical engineering Components Surface treatment Technologies Page Milling 3 Turning 4-5 Grinding 6-7 Inspection, Quality Control 8-9 Surface treatment 10-13 Anodizing
More informationTHE DRIVE OFF ROAD NEWSLETTER
THE DRIVE OFF ROAD NEWSLETTER TAILORED PROTECTION SYSTEMS for modern materials in today's automobile TOPIC CONTENT 6 Basic materials: Past - Today - Future Functionalization with color and corrosion protection
More informationOEM COMPONENT PARTS & CAPABILITIES HANDBOOK
OEM COMPONENT PARTS & CAPABILITIES HANDBOOK Injection Molded Plastics Stainless Steel Sewn Fabric Metal Working & Casting Rubber Molding Global Sourcing Capabilities Caster & Wheel Manufacturing Table
More informationPowder-Metal Processing and Equipment
Powder-Metal Processing and Equipment Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 17 Powder Metallurgy Metal powders are compacted into desired and
More informationDistribution Review. Corrosion Control. Corrosion Control Vocabulary. American Water College 1. Corrosion Control Training Objectives
Distribution Review Corrosion Control Corrosion Control Training Objectives To gain an understanding of: Corrosion control vocabulary The factors affecting corrosion Methods used to control corrosion Alkalinity
More informationPROCON I N T E R N A T I O N A L, L L C. CONSULTING ARCHITECTS & ENGINEERS CONSTRUCTION TECHNOLOGY
PROCON P R O F E S S I O N A L C O N S U L T A N T S I N T E R N A T I O N A L, L L C CONSULTING ARCHITECTS & ENGINEERS CONSTRUCTION TECHNOLOGY www.proconweb.com Assessing the Performance of Metal Trim
More informationChapter 16 Corrosion and Degradation of Materials
Chapter 16 Corrosion and Degradation of Materials Concept Check 16.1 Question: Would you expect iron to corrode in water of high purity? Why or why not? Answer: Iron would not corrode in water of high
More informationMILLENNIUM SIGNATURES MARKING SYSTEMS, INC. Electro-Chemical Etching Electrolyte Chart
MILLENNIUM SIGNATURES MARKING SYSTEMS, INC. Electro-Chemical Etching Electrolyte Chart ALUMINUM A-10 C, 11 VOLTS or 2 3 SECONDS ALLOW A FEW SECONDS AFTER MARKING FOR DEVELOPING BEFORE NEUTRALIZING. THIS
More informationPowder Metallurgy. Powder-Metal Processing and Equipment 11/10/2009
Powder Metallurgy Powder-Metal Processing and Equipment Metal powders are compacted into desired and often complex shapes and sintered* to form a solid piece * Sinter: To heat without melting Text Reference:
More informationIxef. Ixef PARA. polyarylamide SPECIALTY
Ixef Ixef PARA polyarylamide SPECIALTY POLYMERS A Remarkable Combination of Strength and Beauty Ixef PARA is ideal for molding complex parts needing overall strength and a smooth, beautiful surface finish.
More informationLecture 9 - Manufacturing in Engineering
Introduction Dr. Carolyn Skurla Speaking Slide 2 Process Selection Choice depends on: The material from which the component is to be made. The size, shape, and dimension tolerances for the component. The
More informationTHE HIGH PRESSURE ZINC DIE CASTING PROCESS: MATERIALS
www.dynacast.com THE HIGH PRESSURE ZINC DIE CASTING PROCESS: MATERIALS Zn die casting with zinc-based alloys is one of the most efficient and versatile high-production methods used for the ZnPressure manufacturing
More informationTECHNICAL DATA SHEET GRILON TSG-30/4 V0
TECHNICAL DATA SHEET GRILON TSG-30/4 V0 Product Description Grilon TSG-30/4 V0 is a heat stabilised, flameretardant, self-extinguishing engineering thermoplastic, reinforced with glass-fibre 30% (by weight)
More informationEVOCOAT HYBRID
F/T 008 1/2 EVOCOAT HYBRID 5503-450 CHEMICAL DESCRIPTION Evocoat Hybrid 5503-450 is fast setting, rapid curing, 100% solids, flexible, aromatic, two component hybrid polyurea spray system that can be applied
More information5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS SUB-TOPIC 9.3 TO 5 EXTRACTION OF METALS; RECYLING OF METALS; IRON LEARNING OUTCOMES
More informationDECO AND SPORT THE SURFACE ENGINEERS
DECO AND SPORT THE SURFACE ENGINEERS We are the leader in decorative coatings, you get the benefits Decobond TM Coatings for a Clean and Lasting Finish +b 40 35 30 25 20 15 10 5 Silver Nickel 70 < L*
More informationLocks, Latches & Vents. Leaflet No. A10.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A10.1 Locks, Latches & Vents I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are Rencol s flexible manufacturing
More informationConcrete Surface Preparation
Concrete Surface Preparation The MOST Important Factor for the Success of Coating and Lining Installations What is Surface Preparation? Mechanically or chemically preparing a substrate to an acceptable
More informationBarry Avenue Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Barry Avenue Plating Inc 2210 Barry Ave 90064 United States This certificate demonstrates conformance and recognition
More informationGrivory GVX Metal replacement at the highest level
GVX Metal replacement at the highest level Introduction Our metal is called With the high-performance polymer GV, EMS- GRIVORY has been market leader in the field of metal replacement for many years now.
More informationHow properties of thermoplastics are affected by processing.
How properties of thermoplastics are affected by processing. Nick Barron Global Industry Manager Oil & Gas, Röchling nbarron@sustaplast.de 2nd June 2016 Material processing and its effects - NKF 1 Presentation
More informationDecorative Sheet Metal Finishes
Technical Information Decorative Sheet Metal Finishes SandTex InvariMatte InvariLux Linen InvariGrain InvariWisp InvariMatte Black InvariBlend Micro Textures Akin to embossing, micro textures are produced
More informationIron is found in an oxidized state and is mined from the ground as an iron ore.
Iron is found in an oxidized state and is mined from the ground as an iron ore. Energy is used to convert this iron oxide into steel. Ore is loaded into a blast furnace where heat energy removes the oxygen
More informationTECHNICAL DATA SHEET GRILON AG-35
TECHNICAL DATA SHEET GRILON AG-35 Grilon AG-35 is a heat stabilised, normal viscosity PA 66 injection moulding grade with 35% glass fibres. High stiffness High tensile strength High heat distortion temperature
More informationINTRODUCTION. What is Manufacturing? Materials in Manufacturing Manufacturing Processes Production Systems Organization of the Book
INTRODUCTION What is Manufacturing? Materials in Manufacturing Manufacturing Processes Production Systems Organization of the Book Manufacturing is Important! Technologically Economically Historically
More informationZINC DIE CASTING ALLOYS
ZINC DIE CASTING ALLOYS Overview Eastern Alloys manufactures the complete range of zinc die casting alloys. ZAMAK alloys were first developed during the 1920's by The New Jersey Zinc Company. The name
More informationSEMMPF3-031 Finishing materials by electroplating methods
Overview This standard identifies the competencies you need to carry out electroplating processes to various substrates, in accordance with approved procedures. The electroplating activities carried out
More informationInstitute of Materials Finishing PREFACE TO THE 2010 EDITION 3 INTRODUCTION TO DISTANCE LEARNING 4 MODULE OBJECTIVES 7
CONTENTS Page PREFACE TO THE 2010 EDITION 3 INTRODUCTION TO DISTANCE LEARNING 4 MODULE OBJECTIVES 7 SECTION A INTRODUCTION TO SURFACE FINISHING Lesson 1 Surface Finishing Technologies SECTION B BASIC SCIENCE
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationCorrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B
Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B L.A. Dobrzaski, M. Drak, J. Trzaska Division of Materials Processing Technology and Computer Techniques in Materials
More informationFEATURES AND BENEFITS
METAL RESCUE Rust Remover Bath is your clean, safe and easy solution to removing rust from iron and steel. Metal Rescue utilizes a unique and selective chelating agent to remove rust (iron oxide) without
More informationProcessing of Non-Metals Prof. Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee
Processing of Non-Metals Prof. Dr. Inderdeep Singh Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Module - 1 Engineering Materials and Processing Lecture -
More informationTECHNICAL DATA SHEET GRIVORY GV-5 FWA
TECHNICAL DATA SHEET GRIVORY GV-5 FWA BLACK 9225 Product description Grivory GV-5 FWA black 9225 is a 50% glassfibre reinforced engineering thermoplastic material based on a combination of semicrystalline
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 27831-2 First edition 2008-10-15 Metallic and other inorganic coatings Cleaning and preparation of metal surfaces Part 2: Non-ferrous metals and alloys Revêtements métalliques
More informationSur-Tech A/S Surface Technology
Sur-Tech A/S Surface Technology ELECTROLESS NICKEL A wear resistant and corrosion protective coating DS/ ISO 9001 ISO 14001 Quality Assurance System Environmental Management System Sur-Tech A/S Bygmarken
More informationCONCRETE STEPS, HANDRAILS, AND SAFETY RAIL
SUDAS Standard Specifications Division 9 - Site Work and Landscaping Section 9080 - Concrete Steps, Handrails, and Safety Rail CONCRETE STEPS, HANDRAILS, AND SAFETY RAIL PART - GENERAL.0 SECTION INCLUDES
More informationHighlights AKRO-PLASTIC
Highlights AKRO-PLASTIC AKRO-PLASTIC GmbH Member of the Feddersen Group AKROMID HI Skid protection B3 GF 30 S1 natural (2091) Broad product spectrum unreinforced and reinforced S1 modification: cold impact
More informationLecture notes version 13 Sep 2011 Chapter 2 Family trees: organizing materials and processes
Lecture notes version 13 Sep 2011 Chapter 2 Family trees: organizing materials and processes LEGO elements are thermoplastics. They are melted at 235 C, molded (gevormd) under pressure, and harden as they
More informationFastening technology for metals and plastics
Fastening technology for metals and plastics Thread forming screws for metals TAPTITE 2000 (M1 approx. M10) The TAPTITE 2000 allows chipless forming during the fastening process. It is characterized by
More informationProducing Metal Parts
Producing Metal Parts CNC vs. Additive Manufacturing www.3dhubs.com METAL KIT 2 Introduction This Kit discusses how to select the right manufacturing process for metal parts by comparing CNC and Additive
More informationNICKELOID. METALS Since 1898 PRE-FINISHED METALS FOR THE AUTOMOTIVE INDUSTRY
A M E R I C A N N I C K E L O I D NICKELOID METALS Since 1898 PRE-FINISHED METALS FOR THE AUTOMOTIVE INDUSTRY NICKELOID METALS Since 1898 USING SCIENCE MAKING ART The beauty of Nickeloid metals is much
More informationE-COAT SUSTAINABLE LONG - FIBER THERMOPLASTIC COMPOSITES FOR STRUCTURAL AUTOMOTIVE APPLICATIONS
E-COAT SUSTAINABLE LONG - FIBER THERMOPLASTIC COMPOSITES FOR STRUCTURAL AUTOMOTIVE APPLICATIONS Raman Chaudhari 1,2, Manfred Reif 1, Oliver Geiger 1, Dr. Frank Henning 1, Alexander Diehl 1, Andrea Terenzi
More informationOman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS 1 CHAPTER 7 : 2 METALS 3 Which of these things are
More informationLGF reinforced compounds Safe under extreme loads
LGF reinforced compounds Safe under extreme loads AKRO-PLASTIC GmbH Member of the Feddersen Group LGF reinforced compounds Typical values for al color material 23 C Test specification Test method Unit
More informationDefining Thermal Manufacturing
Defining Thermal Manufacturing Thermal manufacturing relies on heat-driven processes like drying, smelting, heat treating, and curing to produce materials such as metals, glass, and ceramics, as well as
More informationCOMPOSITES. Composite Materials: Structure, General Properties, and Applications
COMPOSITES Composite Materials: Structure, General Properties, and Applications COMPOSITES Composite Materials Metal Matrix Composites (MMC) Mixture of ceramics and metals reinforced by strong, high-stiffness
More informationCHAPTER 3 DEVELOPMENT OF ELECTROPLATING SETUP FOR PLATING ABS AND POLYAMIDES
82 CHAPTER 3 DEVELOPMENT OF ELECTROPLATING SETUP FOR PLATING ABS AND POLYAMIDES 3.1 BACKGROUND OF ELECTROPLATING 83 3.2 DETAILS OF THE DEVELOPMENT OF ELECTROPLATING SETUP 83 3.2.1 Polypropylene Tank for
More informationA SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND ROBOTICS ISSN 2320-7345 A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS 1 R.Raja, 2 M.Rajkumar 1 Assistant Lecturer, St. Joseph College
More informationBMM3643 Manufacturing Processes Powder Metallurgy Process
BMM3643 Manufacturing Processes Powder Metallurgy Process by Dr Mas Ayu Bt Hassan Faculty of Mechanical Engineering masszee@ump.edu.my Chapter Synopsis This chapter will expose students to the sequence
More informationTECHNICAL DATA SHEET GRILON AG-30 H
TECHNICAL DATA SHEET GRILON AG-30 H BLACK 9836 Product description Grilon AG-30 H black 9836 is a normal viscosity, specially heat stabilised PA 66 injection moulding grade with 30% glass fibres. Grilon
More informationITEM 442 METALS FOR STRUCTURES
AFTER NOVEMBER 1, 2008 ITEM 442 METALS FOR STRUCTURES 442.1 Description. These specifications shall govern for materials such as structural steel, wrought iron, bronze, and other metals used in structures,
More informationMetal Framing Channels Overview
New Trivalent Galv-Krom Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom finish. Galv-Krom finish is a combination of.5 mils electro-plated Zinc and
More informationAustralian Standard. Electroplated coatings of rhodium for general engineering applications AS AS 2429
AS 2429 2004 AS 2429 Australian Standard Electroplated coatings of rhodium for general engineering applications This Australian Standard was prepared by Committee MT-009, Metal Finishing. It was approved
More information