Dynisco SPX-T (3 -Series)

Transcription

1 From lab to production, providing a window into the process Dynisco SPX-T (3 -Series) Description The SPX-T (3-Series) is a smart 4-20m pressure transmitter General Purpose Smart Pressure Sensors for Hazardous Locations that includes Temperature Compensation and DynaLarity, a Dynisco innovation. The SPX-T delivers the best spec performance in the line. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. DynaLarity uses an advanced algorithm that will linearize offsets due to process effects on the sensor. Combined Temperature Compensation and DynaLarity reduces temperature-related drift by as much as 80% and improves accuracy by more than 60% over other sensors. Process temperature output is available (RTD or 4-20m). HRT communication is standard. The SPX 3-Series is an all-welded construction designed for use in hazardous locations and are available with a variety of different process and electrical connections. These amplified transmitters eliminate the need for external signal conditioning. ll models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices Features 4-20m loop-powered output +/- 0.5% accuracy available Reduced temperature drift by 80% over non compensated units Temperature output available (RTD or 4-20m) Wide selection of pressure ranges available Turndown 6: Configurations available for use in hazardous locations Remotely configurable via HRT Precise, repeatable pressure measurements utput supplied directly to DSC or PLC Meets CE requirements CE TEX Intrinsically Safe pproved FM Explosion proof approved CS Explosion proof approved SIL 2 Certified (pressure output) PL'c' Certified (relay output) dditional approvals are available

2 Performance Characteristics SPX-T (3- Series) utput Input Voltage ccuracy ccuracy is defined as the combined error expressed as a percentage of full scale output with the specifications of: Electronics ambient temperature; Snout compensated temperature range; capillary of <= 36"; DyMax coated 5-5 SST diaphragm; est Straight Line (SL) %FS, per IS-37.. Consult Factory for availability and specifications of other configurations m, with optional HRT 6-36 Vdc (Std); 6-30 Vdc (TEX IS) 32XX: 33XX: Repeatability ±0.% Rangeability ver Pressure Load Resistance Electronics mbient Temperature Electronics perating Temperature Electronics Compenstated Temperature Range Snout Compensated Temperature Range 6: Turndown.5 x FS ± 0.25% for pressure ranges > 3,000 psi ± 0.5% for pressure ranges =,500 psi ± 0.75% for pressure ranges <,500 psi ± 0.5% for pressure ranges > 3,000 psi ± 0.25% for pressure ranges =,500 psi ± 0.5% for pressure ranges <,500 psi Vdc,, Vdc 70 F (20 C) -20 to 85 F (-29 to 85 C) 70 to 85 F (20 to 85 C) 70 to 572 F (20 to 300 C) Snout perating Temperature Models: 3242, 3243, 3342, 3343: 32 to 752 F (0 to 400 C) Models: 3290, 329, 3390, 339: 32 to 600 F (0 to 35 C) Mechanical Characteristics Mounting Torque Standard Wetted Parts pprovals & Certifications CE TEX IS SIL 2 (pressure output) & PL'c' (relay output) FM & CS Explosion Proof dditional pprovals are vailable 3242: 500 inch-lbf max 3243: 50 inch-lbf max 3342: 500 inch-lbf max 3343: 50 inch-lbf max 3290: 350 inch-lbf max 329: 350 inch-lbf max 3390: 350 inch-lbf max 339: 350 inch-lbf max DyMax coated 5-5 PH SST

3 rdering Guide for Models SPX3242 3XXX X X XX X XX XX XX X XX XX XXXX Model 242 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 00 = /2-20 UNF 05 = M8 x.5 Thread Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

4 rdering Guide for Models SPX3243 3XXX X X XX X XX XX XX X XX XX XXXX Model 243 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 25 = Standard Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

5 rdering Guide for Models SPX3342 3XXX X X XX X XX XX XX X XX XX XXXX Model 342 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 00 = /2-20 UNF 05 = M8 x.5 Thread Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

6 rdering Guide for Models SPX3343 3XXX X X XX X XX XX XX X XX XX XXXX Model 343 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 25 = Standard Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

7 rdering Guide for Models SPX3290 3XXX X X XX X XX XX XX X XX XX XXXX Model 290 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 69 = No Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

8 rdering Guide for Models SPX329 3XXX X X XX X XX XX XX X XX XX XXXX Model 29 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 48 = Flat Faced Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

9 rdering Guide for Models SPX3390 3XXX X X XX X XX XX XX X XX XX XXXX Model 390 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 69 = No Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

10 rdering Guide for Models SPX339 3XXX X X XX X XX XX XX X XX XX XXXX Model 390 pproval C = Explosion Proof, Dust Ignition Proof / CS E = Explosion Proof, Dust Ignition Proof / FM S = Intrinsically Safe / TEX N = No pprovals Diaphragm Material = DyMax Coated 5-5 PH SST M = Hastelloy P = Inconel Process Connection 48 = Flat Faced Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD T = 3-Wire RTD T = 4-20m utput Electrical Connections C = PTH-0-6P Connector G = PTH-2-8P Connector C = /2-4 NPT Conduit with 42 Leads F = PCIH-2-8P Connector Threaded Style Communications = HRT not included with zero & span = HRT with zero & span C = HRT with zero & span & turndown F = HRT without zero & span Flex Length = No flex DD = 8 (46cm) FF = 30 (76cm) Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 4 = 500 psi; 35 ar 35 Kg/cm MPa 3,500 KPa 5 = 750 psi 50 ar 50 Kg/cm 2 5 MPa 5,000 KPa 6 =,000 psi 70 ar 70 Kg/cm 2 7 MPa 7,000 KPa 7 =,500 psi 00 ar 00 Kg/cm 2 0 MPa 0,000 KPa 20 = 3,000 psi 200 ar; 200 Kg/cm 2 20 MPa 20,000 KPa 2 = 5,000 psi 350 ar; 350 Kg/cm 2 35 MPa 35,000 KPa 22 = 7,500 psi 500 ar; 500 Kg/cm 2 50 MPa 50,000 KPa 23 = 0,000 psi 700 ar; 700 Kg/cm 2 70 MPa 70,000 KPa ther configurations are avaialble. Please consult factory.

11 REV EC Y PP DTE C TP LE 07/29/ R DETIL '' ELECTRICL HUSING, CNNECTR ENDIX CNNECTR PTIH-2-8P PTIH-0-6P PCIH-2-8P R EQUIVLENT 5.0 ± ± RIGID STEM LENGTH u.06 [.5 ] RIGID STEM TYPE HEX /2-20 UNF-2 THREDS.63 6 LCKING PRTECTIVE GRUND TERMINL SST RIDED FLEXILE PRESSURE HSE FLEX TYPE SNUT LENGTH u.02 [ 0.5 ] /2-4 NPT ELECTRICL HUSING, CNDUIT [ 5.8 ] FLTS PER DETIL '' SPN DJUST CTUTR FLEX LENGTH u.2 [ 3 ] FLTS VIEW - ZER DJUST CTUTR H F E SPN DJUST CTUTR G D VIEW - C.44.2 ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS ZER DJUST CCESS SPN DJUST CCESS ZER DJUST CTUTR VIEW NTES:. LL DIMENSINS RE INCHES [ MILLIMETERS ] 2. EXPSED SURFCES RE STINLESS STEEL. SIGNL PRIMRY 4 20m RCL NLY RCL WITH SECNDRY 4 20m NLY SECNDRY 4 20m NLY DUL RTD NLY TERMINL DESCRIPTIN CNDUIT LED WIRE CLR 6 PIN 8 PIN PWR+/SIG+ RED PWR /SIG LCK CSE GREEN PTINS RCL+ RNGE F E RCL LUE E D RCL+ RNGE E RCL LUE D 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H RTD ( ) WHITE D RTD (+) GREY E RTD (+) RWN F TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS > 0.5 DI < 0.5 DI NGLES ± FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. SPX-T D NT SCLE DRWING MTERIL TITLE DRWN CHECKED PPRVED FINISH ' 45 30' DETIL '' SPX-T 3342 UTLINE DWG DRC DTE DTE 0/30/07 MJL DTE 05/27/ EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. FRGE PRKWY, FRNKLIN, M SIZE DWG. N. REV C NNE SCLE SHEET F C

12 REV EC Y C TP PP DTE LE 07/29/6 R DETIL '' ELECTRICL HUSING, CNNECTR ENDIX CNNECTR PTIH-2-8P PTIH-0-6P PCIH-2-8P R EQUIVLENT 5.0 ± ± RIGID STEM LENGTH u.06 [.5 ] RIGID STEM TYPE x.344 [ 8.77mm ] THRU EQULLY SPCED N [ 50.8 ].C VIEW - MUNTING FLNGE ±5 2x 5/6-24 UNF-2 THRU EQULLY SPCED 80v PRT (JCK-UT SCREWS) /2-4 NPT.63 6 LCKING PRTECTIVE GRUND TERMINL ELECTRICL HUSING, CNDUIT [ 5.8 ] FLTS PER DETIL '' SPN DJUST CTUTR SST RIDED FLEXILE PRESSURE HSE FLEX TYPE SPECIFIED FLEX LENGTH u.2 [ 3 ] ZER DJUST CTUTR H F SPN DJUST CTUTR G SPECIFIED SNUT LENGTH u.02 [ 0.5 ] ZER DJUST CTUTR E C D 30 NTES: LL DIMENSINS RE ZER DJUST CCESS INCHES [ MILLIMETERS ] 2. EXPSED SURFCES RE STINLESS STEEL. ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS VIEW - SPN DJUST CCESS SIGNL PRIMRY 4 20m RCL NLY RCL WITH SECNDRY 4 20m NLY SECNDRY 4 20m NLY DUL RTD NLY FLTS VIEW - VIEW - TERMINL DESCRIPTIN CNDUIT LED WIRE CLR 6 PIN 8 PIN PWR+/SIG+ RED PWR /SIG LCK CSE GREEN PTINS RCL+ RNGE F E RCL LUE E D RCL+ RNGE E RCL LUE D 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H RTD ( ) WHITE D RTD (+) GREY E RTD (+) RWN F TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS > 0.5 DI < 0.5 DI NGLES ± FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. SPX-T D NT SCLE DRWING MTERIL DETIL '' -RING GRVE GRVE FR /2 NM.D. VENTED METL -RING, (SILVER PLTED) DYNISC P/N 6526 TITLE DRWN CHECKED PPRVED FINISH 63 SPX-T 3343 UTLINE DWG DRC DTE DTE R.00 0/30/07 MJL DTE 5/27/ EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. FRGE PRKWY, FRNKLIN, M SIZE DWG. N. REV C NNE SCLE SHEET F C

13 REV EC Y PP DTE C LE TP 07/29/6 R DETIL '' ELECTRICL HUSING, CNNECTR ENDIX CNNECTR PTIH-2-8P PTIH-0-6P PCIH-2-8P R EQUIVLENT 5.0 ± ± RIGID STEM LENGTH u.06 [.5 ] RIGID STEM TYPE 5.8 [ 5.8 ] FLTS.79 x.38w (8.26 x 9.65W] JCK-UT, 2 PL GSKET LCKING PRTECTIVE GRUND TERMINL ELECTRICL HUSING, CNDUIT PER DETIL '' SPN DJUST CTUTR SST RIDED FLEXILE PRESSURE HSE FLEX TYPE FLEX LENGTH u.2 [ 3 ] ZER DJUST CTUTR SNUT LENGTH u.02 [ 0.5 ] /2-4 NPT [ 5.8 ] FLTS ZER DJUST CCESS ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS SPN DJUST CCESS SPN DJUST CTUTR G ZER DJUST CTUTR H NTES: LL DIMENSINS RE INCHES [ MILLIMETERS ] 2. EXPSED SURFCES RE STINLESS STEEL. SIGNL PRIMRY 4 20m RCL NLY RCL WITH SECNDRY 4 20m NLY SECNDRY 4 20m NLY DUL RTD NLY TERMINL DESCRIPTIN CNDUIT LED WIRE CLR 6 PIN 8 PIN PWR+/SIG+ RED PWR /SIG LCK CSE GREEN PTINS FLTS VIEW - RCL+ RNGE F E RCL LUE E D RCL+ RNGE E RCL LUE D 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H RTD ( ) WHITE D RTD (+) GREY E RTD (+) RWN F VIEW - TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS > 0.5 DI < 0.5 DI NGLES ± FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. SPX-T D NT SCLE DRWING MTERIL TITLE DRWN CHECKED PPRVED FINISH 63 SPX-T 3390 UTLINE DWG F E VIEW - MJL DTE 05/9/08 DTE MJL DTE 05/20/08 D C EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. FRGE PRKWY, FRNKLIN, M SIZE DWG. N. REV C NNE SCLE SHEET F C

14 REV EC Y C TP PP DTE LE 07/29/6 R DETIL '' ELECTRICL HUSING, CNNECTR RIGID STEM LENGTH u.06 [.5 ] ENDIX CNNECTR PTIH-2-8P PTIH-0-6P PCIH-2-8P R EQUIVLENT 5.0 ± ± RIGID STEM TYPE /2-4 NPT LCKING PRTECTIVE GRUND TERMINL ELECTRICL HUSING, CNDUIT [ 5.8 ] FLTS PER DETIL '' SPN DJUST CTUTR SST RIDED FLEXILE PRESSURE HSE FLEX TYPE FLEX LENGTH u.2 [ 3 ] ZER DJUST CTUTR H F SPN DJUST CTUTR G.75 9 ZER DJUST CTUTR SNUT LENGTH u.02 [ 0.5 ] x 33/64 [3.] THRU EQULLY SPCED N 2.25 [54] E C D 45 ±5 NTES: LL DIMENSINS RE ZER DJUST CCESS 2. EXPSED SURFCES RE STINLESS STEEL. ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS INCHES [ MILLIMETERS ] VIEW - SPN DJUST CCESS SIGNL PRIMRY 4 20m RCL NLY RCL WITH SECNDRY 4 20m NLY SECNDRY 4 20m NLY DUL RTD NLY FLTS VIEW - VIEW - TERMINL DESCRIPTIN CNDUIT LED WIRE CLR 6 PIN 8 PIN PWR+/SIG+ RED PWR /SIG LCK CSE GREEN PTINS RCL+ RNGE F E RCL LUE E D RCL+ RNGE E RCL LUE D 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H 2ND PWR+/SIG+ VILET G 2ND PWR /SIG YELLW H RTD ( ) WHITE D RTD (+) GREY E RTD (+) RWN F TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS > 0.5 DI < 0.5 DI NGLES ± FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. SPX-T D NT SCLE DRWING MTERIL TITLE VIEW - MUNTING FLNGE "S" DRWN CHECKED PPRVED FINISH 63 SPX-T 339 UTLINE DWG DRC DTE DTE 0/30/07 MJL DTE 5/27/08 2x 5/6-8 UNC-2 THRED 80v PRT N 2.25 [54] EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. FRGE PRKWY, FRNKLIN, M SIZE DWG. N. REV C 6900 NNE SCLE SHEET F C

15 REV EC Y PP DTE TP LE 07/29/6 PIN H S Z 8 - PIN PC -RING WITH PUSH UTTNS PCIH-2-8P GURDIN CNNECTR WIRING PIN FUNCTIN PWER + SIGNL - C PWER - D N CNNECTIN E Rcal - F Rcal + G RELY CNTCT H RELY CNTCT PIN PIN PIN PIN PIN PIN PIN H PIN H 8 - PIN PC WELDED WITH PUSH UTTNS PCIH-2-8P 8 - PIN PC WELDED WITH HLLS PCIH-2-8P NTE:. THESE CNNECTR PTINS RE VILLE N MST F THE CNFIGURTINS SHWN N THE PREVIUS SHEETS. TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS < 0.5 DI 4. NGLES ± DI 5. FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. MTERIL x x D NT SCLE DRWING TITLE DRWN CHECKED PPRVED FINISH GURDIN SERIES CNNECTRS TP DTE 7/27/6 DTE LE DTE 7/27/6 63 EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. SIZE SCLE FRGE PRKWY, FRNKLIN M DWG. N NNE Instruments SHEET F REV R >

16 Gereral Purpose Smart Pressure Sensors for Hazardous Locations 206. Dynisco reserves the right to make changes without notice. Refer to for access to perator Manual and other support documentation. PN: DSSPX3SERIES REV: 6 EC: Dynisco Hotline -800-Dynisco Dynisco Europe, GmbH Dynisco Shanghai 38 Forge Parkway Pfaffemstr. 2 Phone uilding 7, No. 568 Phone Franklin, M Phone Hellbronn Fax Longpan Rd Malu Toll Free US Fax Germany dyniscoeurope@dynisco.com Jiading, 2080 China Fax infoinst@dynisco.com