Dynisco SPX 4-Series. Description. Features. General Purpose Smart Pressure Sensors for Hazardous Locations

Size: px

Start display at page:

Download "Dynisco SPX 4-Series. Description. Features. General Purpose Smart Pressure Sensors for Hazardous Locations"

Cassandra Warner
5 years ago
Views:

From lab to production, providing a window into the process Dynisco SPX 4-Series General Purpose Smart Pressure Sensors for Hazardous Locations Description The Dynisco SPX 4-Series is a smart 4-20m

external signal conditioning. ll models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices.

1 From lab to production, providing a window into the process Dynisco SPX 4-Series General Purpose Smart Pressure Sensors for Hazardous Locations Description The Dynisco SPX 4-Series is a smart 4-20m pressure transmitter designed for use in hazardous locations and are available with a variety of different process and electrical connections These amplified transmitters eliminate the need for external signal conditioning. ll models can interface directly with distributed control systems, PLC's, computers, and similar high level control devices. ptional thermocouple or RTD configurations are available to provide melt temperature. Features 4-20m loop-powered output +/- 0.25% accuracy available Wide selection of pressure ranges available Turndown 6: Configurations available for use in hazardous locations Remotely configurable via HRT Precise, repeatable pressure measurements utput supplied directly to DSC or PLC Meets CE requirements CE TEX Intrinsically Safe pproved SIL 2 Certified (pressure output) PL'c' Certified (relay output) dditional approvals are available

2 General Purpose Smart Pressure Sensors for Hazardous Locations Performance Characteristics utput Input Voltage ccuracy ccuracy is defined as the combined error expressed as a percentage of full scale output with the specifications of: Electronics ambient temperature, capillary of <= 36"; DyMax coated 5-5 SST diaphragm; est Straight Line (SL) %FS, per IS-37. Consult Factory for availability and specifications of other configurations. Repeatability ±0.% Rangeability ver Pressure Zero alance djustment Range Load Resistance Electronics mbient Temperature Electronics perating Temperature Diaphragm Temperature Electronics Compenstated Temperature Range Zero Shift (Electronics Temp Change) Span Shift (Electronics Temp Change) Zero Shift (Snout Temp Change) Mechanical Characteristics Mounting Torque Standard Wetted Parts pprovals & Certifications CE TEX IS SIL 2 (pressure output) & PL'c' (relay output) 4-20 m, with optional HRT 6-36 Vdc (Std); 6-30 Vdc (TEX IS) 4222 ± 0.25% for pressure ranges >,500 psi; ± 0.50% for pressure ranges <,500 psi 4232 ± 0.25% for pressure ranges >,500 psi; ± 0.50% for pressure ranges <,500 psi 4352 ± 0.25% for pressure ranges >,500 psi; ± 0.50% for pressure ranges <,500 psi 4502 ± 0.50% 4622 ± 0.50% 4672 ± 0.50% 6: Turndown 2X FS or 35,000 psi,whichever is less.2 X FS 35,000-72,500 psi -40% to +0%; -80% to 20% for FSP < 500 psi Vdc,, Vdc 70 F (20 C) dditional approvals available (consult factory) -20 to 85 F (-29 to 85 C) 750 F (400 C) max [SPX4502 model limited to 600 F (35 C)] 0 to 50 F (-8 to 65 C) 4222: 0.0% F.S./ F max (0.02% F.S./ C max) 4232: 0.0% F.S./ F max (0.02% F.S./ C max) 4352: 0.0% F.S./ F max (0.02% F.S./ C max) 4502: 0.0% F.S./ F max (0.02% F.S./ C max) 4622: 0.05% F.S./ F max (0.0% F.S./ C max) 4672: 0.05% F.S./ F max (0.0% F.S./ C max) 4222: 0.0% F.S./ F max (0.02% F.S./ C max) 4232: 0.0% F.S./ F max (0.02% F.S./ C max) 4352: 0.0% F.S./ F max (0.02% F.S./ C max) 4502: 0.0% F.S./ F max (0.02% F.S./ C max) 4622: 0.02% F.S./ F max (0.04% F.S./ C max) 4672: 0.02% F.S./ F max (0.04% F.S./ C max) 4222: 5 psi/00 F (27 psi/00 C) typical 4232: 5 psi/00 F (27 psi/00 C) typical 4352: 5 psi/00 F (27 psi/00 C) typical 4502: psi/00 F (from F); 2 psi/00 F (from F) typical 4622: 25 psi/00 F (45 psi/00 C) typical 4672: 25 psi/00 F (45 psi/00 C) typical 4222: 500 inch-lbf max 4232: 50 inch-lbf max 4352: 500 inch-lbf max 4502: 350 inch-lbf max 4622: 500 inch-lbf max 4672: 500 inch-lbf max DyMax coated 5-5 PH SST

3 General Purpose Smart Pressure Sensors for Hazardous Locations rdering Guide for Models SPX4222 & SPX4622 4XXX X X XX X XX XX XX X XX XX XXXX Model 222= Thread Mounted 622= Thread Mounted pproval N = No pproval S = CE TEX / Intrinsically Safe Diaphragm Material = DyMax Coated 5-5 PH SST M= Hastelloy P= Inconel Process Connection 00 = /2-20 UNF 05 = M8 x.5 Thread ption Code Temperature Sensor ZZ = No Thermocouple / RTD = Single J TC with 3" Flex Electrical Connections = PT02-0-6P Connector F = PCIH-2-8P Connector Threaded Style Communications = No Protocol = HRT TM Protocol C = HRT TM with Turndown Flex Length = No Flex DD = 8", 46cm Flex FF = 30", 76cm Flex Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI Snout Length W = 3", 7.6cm CE = 6", 5 cm DP = 9", 23cm FE = 2.5", 32cm GH = 5", 38cm Pressure Range 3 2 = 250 psi 7.5 ar 7.5 kgf/cm 2.75 MPa 4 = 500 psi 35 ar 35 kgf/cm MPa 5 = 750 psi 50 ar 50 kgf/cm MPa 6 =,000 psi 70 ar 70 kgf/cm MPa 7 =,500 psi 00 ar 00 kgf/cm MPa 20 = 3,000 psi 200 ar 200 kgf/cm MPa 2 = 5,000 psi 350 ar 350 kgf/cm MPa 22 = 7,500 psi 500 ar 500 kgf/cm MPa 23 = 0,000 psi 700 ar 700 kgf/cm MPa 24 = 5,000 psi,000 ar,000 kgf/cm MPa 25 = 20,000 psi,400 ar,400 kgf/cm MPa 27 = 30,000 psi 2,000 ar 2,000 kgf/cm MPa ther configurations are available. Please consult factory. 2 vailable in M8 x.5 thread only

4 General Purpose Smart Pressure Sensors for Hazardous Locations rdering Guide for Models SPX4352 & SPX4672 4XXX X X XX X XX XX XX X XX XX XXXX Model 352= Jam Nut 672= Jam Nut pproval N = No pproval S = CE TEX / Intrinsically Safe Diaphragm Material = DyMax Coated 5-5 PH SST M= Hastelloy P= Inconel Process Connection 3 = /2-20 Jam Nut (J) 5 = M8 x.5 Thread Jam Nut Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD Electrical Connections = PT02-0-6P Connector F = PCIH-2-8P Connector Threaded Style Communications = No Protocol = HRT TM Protocol C = HRT TM with Turndown Flex Length DD = 8", 46cm Flex FF = 30", 76cm Flex Exposed Capillary Length E = 0", 25.4 cm Pressure Range 4 = 500 psi 35 ar 35 kgf/cm MPa 5 = 750 psi 50 ar 50 kgf/cm MPa 6 =,000 psi 70 ar 70 kgf/cm MPa 7 =,500 psi 00 ar 00 kgf/cm MPa 20 = 3,000 psi 200 ar 200 kgf/cm MPa 2 = 5,000 psi 350 ar 350 kgf/cm MPa 22 = 7,500 psi 500 ar 500 kgf/cm MPa 23 = 0,000 psi 700 ar 700 kgf/cm MPa 24 = 5,000 psi,000 ar,000 kgf/cm MPa 25 = 20,000 psi,400 ar,400 kgf/cm MPa 27 = 30,000 psi 2,000 ar 2,000 kgf/cm MPa ther configurations are available. Please consult factory.

5 General Purpose Smart Pressure Sensors for Hazardous Locations rdering Guide for Model SPX4232 4XXX X X XX X XX XX XX X XX XX XXXX Model 232 = Flange Mounted, Small Diaphragm pproval N = No pproval S = CE TEX / Intrinsically Safe Diaphragm Material = DyMax Coated 5-5 PH SST M= Hastelloy P= Inconel Mounting Flange 25 = Standard Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI ption Code Temperature Sensor ZZ = No Thermocouple / RTD = Single J TC with 3" Flex Electrical Connections = PT02-0-6P Connector F = PCIH-2-8P Connector Threaded Style Communications = No Protocol = HRT TM Protocol Flex Length DD = 8", 46cm Flex FF = 30", 76cm Flex Snout Length CE = 6", 5.0 cm Pressure Range 4 = 500 psi 35 ar 35 kgf/cm MPa 5 = 750 psi 50 ar 50 kgf/cm MPa 6 =,000 psi 70 ar 70 kgf/cm MPa 7 =,500 psi 00 ar 00 kgf/cm MPa 20 = 3,000 psi 200 ar 200 kgf/cm MPa 2 = 5,000 psi 350 ar 350 kgf/cm MPa 22 = 7,500 psi 500 ar 500 kgf/cm MPa 23 = 0,000 psi 700 ar 700 kgf/cm MPa 24 = 5,000 psi,000 ar,000 kgf/cm MPa 25 = 20,000 psi,400 ar,400 kgf/cm MPa 27 = 30,000 psi 2,000 ar 2,000 kgf/cm MPa ther configurations are available. Please consult factory.

6 General Purpose Smart Pressure Sensors for Hazardous Locations rdering Guide for Model SPX4502 4XXX X X XX X XX XX XX X XX XX XXXX ption Code Model 502 = Flange Mounted, Large Diaphragm pproval N = No pproval S = CE TEX / Intrinsically Safe Diaphragm Material = DyMax Coated 5-5 PH SST Mounting Flange 90 = Flat Faced Mounting Flange Pressure Units = R C = KPa K = Kgf/cm 2 M = MPa P = PSI Temperature Sensor ZZ = No Thermocouple / RTD Electrical Connections = PT02-0-6P Connector F = PCIH-2-8P Connector Threaded Style Communications = No Protocol = HRT TM Protocol C = HRT TM with Turndown Flex Length DD = 8", 46 cm Flex SS = 6", 5 cm Rigid Snout Length NE = 2.03", 5.6 cm Pressure Range 08 2 = 25 psi.75 ar.75 kgf/cm MPa 09 2 = 50 psi 3.5 ar 3.5 kgf/cm MPa 2 = 00 psi 7.0 ar 7.0 kgf/cm MPa 3 = 250 psi 7.5 ar 7.5 kgf/cm 2.75 MPa 4 = 500 psi 35 ar 35 kgf/cm MPa 5 = 750 psi 50 ar 50 kgf/cm MPa 6 =,000 psi 70 ar 70 kgf/cm MPa 7 =,500 psi 00 ar 00 kgf/cm MPa 20 = 3,000 psi 200 ar 200 kgf/cm MPa 2 = 5,000 psi 350 ar 350 kgf/cm MPa 22 = 7,500 psi 500 ar 500 kgf/cm MPa 23 = 0,000 psi 700 ar 700 kgf/cm MPa ther configurations are available. Please consult factory. 2 Pressure ranges below 250 psi are supplied with rigid capillary.

8 REV EC Y PP DTE TP LE 07/29/6 CNNECTR WIRING PIN FUNCTIN PWER + / SIGNL + PWER - / SIGNL - C N D CNNECTIN E Rcal - F Rcal + ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS ZER SPN Z S VIEW - MSTER KEYWY NTES: UNLESS THERWISE SPECIFIED:. LL DIMENSINS RE IN INCHES [ MILLIMETERS ] R DETIL '' ELECTRICL HUSING, CNNECTR RIGID STEM LENGTH u.06 [.5 ] DETIL '' FLNGE MUNTED PRCESS CNNECTIN ENDIX CNN. PT02-0-6P R EQUIVLENT MTING CNN. PT06-0-6S (SR) R EQUIVLENT RIGID STEM TYPE FLEX TYPE SEE DETIL '' FLEXILE RMR, SST.28 [7. mm] D CVERED CPILLRY SHELL 3.37 [ ] FLEX LENGTH u.2 [3. ] FLTS [9.65] SNUT LENGTH u.02 [ 0.5 ] FLEX LENGTH R RIGID LENGTH + RIGID SNUT LENGTH ±.25 [ 6.35 ] UNIT FLEX LENGTH + RIGID SNUT LENGTH ±.25 [6.35] STNDRD FEMLE CNNECTR STNDRD MLE CNNECTR SET SCREW T/C LCK SST RID CVERED LEDS PER DETIL ' ' PER DETIL ' ' T/C FLEX LENGTH u.2 [3. ] FLEXILE RMR, SST.28 [7. mm] D CVERED CPILLRY UNIT FLEX LENGTH u.2 [3.] x 5/6-24 UNF-2 THRU EQ SP 80v PRT, S SHWN ( FR JCK-UT SCREWS) VIEW - 45 ±5 4x.344 THRU (/32 DRILL) [ 8.77mm] EQULLY SPCED N C. S SHWN. TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS < 0.5 DI 4. NGLES ± DI 5. FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. MTERIL SPX-GEN2 x D NT SCLE DRWING TITLE DRWN CHECKED PPRVED FINISH SPX-GEN2 UTLINES MDEL4232 FLEX,RIGID & TPT DG DTE DTE 07/20/0 MJL DTE 07/20/0 63 2X R.05 MX [0.38 mm] DETIL '' GRVE FR /2 NM.D. VENTED METL -RING EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. SIZE C SCLE Instruments CMMERCIL STREET, SHRN, M DWG. N NNE SHEET F REV >

9 REV EC Y PP DTE TP LE 07/29/6 R ENDIX CNN. PT02-0-6P R EQUIVLENT MTING CNN. PT06-0-6S (SR) R EQUIVLENT CNNECTR WIRING PIN FUNCTIN PWER + / SIGNL + PWER - / SIGNL - C N D CNNECTIN E Rcal - F Rcal + NTES: UNLESS THERWISE SPECIFIED:. LL DIMENSINS RE IN INCHES [ MILLIMETERS ].06 [.52 mm] CPILLRY TUE, TYPE 347 SST FLEXILE RMR, SST [ 7. ] D CVERED CPILLRY JM USHING /2-20 UNF FLEX LENGTH u.2 [3. ] ' 44 30' RIGID LENGTH u.06 [.5 ] FLEX LENGTH + RIGID SNUT LENGTH ±.25 [6.35] ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS ZER SPN Z S VIEW - MSTER KEYWY TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS < 0.5 DI 4. NGLES ± DI 5. FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. MTERIL SPX-GEN2 x D NT SCLE DRWING TITLE DRWN CHECKED PPRVED FINISH UTLINE DRWING SPX4352-GEN2 SPX4672-GEN2 DRG DTE 06/5/0 DTE MJL DTE 08/2/ EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. Instruments SIZE C SCLE CMMERCIL STREET, SHRN, M DWG. N NNE SHEET F REV >

10 REV EC Y PP DTE TP LE 07/29/6 ENDIX CNN. PT02-0-6P R EQUIVLENT MTING CNN. PT06-0-6S (SR) R EQUIVLENT CNNECTR WIRING PIN FUNCTIN PWER + / SIGNL + PWER - / SIGNL - C N D CNNECTIN E Rcal - F Rcal + NTES: UNLESS THERWISE SPECIFIED:. LL DIMENSINS RE IN INCHES [ MILLIMETERS ] R RIGID STEM LENGTH u.06 [.5 ] ELECTRICL HUSING, CNNECTR FLNGE MUNTED PRCESS CNNECTIN GSKET.9 [30.2 ] D.950 [24. ] ID.09 [2.3 ] THK RIGID STEM TYPE FLEX TYPE FLEXILE RMR, SST CVERED CPILLRY.28 [7. ] D FLEX LENGTH u.2 [3.].62 [5.7] FLTS FLEX LENGTH R RIGID LENGTH + SNUT LENGTH ±.25 [6.35] 2x 5/6-24 UNF-2 THRU EQ SP 80v PRT (JCK-UT SCREWS) ZER ND SPN DJUSTS RE PRTECTED Y SEL SCREWS ZER SPN 45 ±.5 4x.56 THRU [3. mm] EQ SP 90v PRT N 2.25.C Z S MSTER KEYWY VIEW - VIEW - FLNGE TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS < 0.5 DI 4. NGLES ± DI 5. FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. MTERIL SPX-GEN2 x D NT SCLE DRWING TITLE SPX - GEN2 UTLINE MDEL 4502 FLEX / RIGID DRWN CHECKED PPRVED FINISH DRG DTE 07/20/0 DTE MJL DTE 07/20/0 63 EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. SIZE C SCLE Instruments CMMERCIL STREET, SHRN, M DWG. N NNE SHEET F REV >

11 REV EC Y PP DTE TP LE 07/29/6 PIN H S Z 8 - PIN PC -RING WITH PUSH UTTNS PCIH-2-8P GURDIN CNNECTR WIRING PIN FUNCTIN PWER + SIGNL - C PWER - D N CNNECTIN E Rcal - F Rcal + G RELY CNTCT H RELY CNTCT PIN PIN PIN PIN PIN PIN PIN H PIN H 8 - PIN PC WELDED WITH PUSH UTTNS PCIH-2-8P 8 - PIN PC WELDED WITH HLLS PCIH-2-8P NTE:. THESE CNNECTR PTINS RE VILLE N MST F THE CNFIGURTINS SHWN N THE PREVIUS SHEETS. TLERNCES UNLESS THERWISE SPECIFIED;. 2 PLCE DECIML ±.0 3 PLCE DECIML ± FRCTINS ± /32 3. DRILLS < 0.5 DI 4. NGLES ± DI 5. FILLETS R.005 MX 6. EDGES R.005 R CHMFER MX 7. PRT T E FREE F URRS 8. LL DIMENSINS RE IN INCHES. MDEL N. MTERIL x x D NT SCLE DRWING TITLE DRWN CHECKED PPRVED FINISH GURDIN SERIES CNNECTRS TP DTE 7/27/6 DTE LE DTE 7/27/6 63 EXCEPT S MY E THERWISE PRVIDED Y CNTRCT, THESE DRWINGS ND SPECIFICTINS RE THE PRPERTY F DYNISC, RE ISSUED IN STRICT CNFIDENCE, ND SHLL NT E REPRDUCED R CPIED, R USED S THE SIS FR THE MNUFCTURE R SLE F PPRTUS WITHUT PERMISSIN. SIZE SCLE FRGE PRKWY, FRNKLIN M DWG. N NNE Instruments SHEET F REV R >

Gereral Purpose Smart Pressure Sensors for Hazardous Locations 206.

com for access to perator Manual and other support documentation. P/N: DSSPX4SERIES REV: 6 EC: 47068 www.dynisco.

com Pfaffemstr. 2 Phone +49 73 297 0 uilding 7, No.

12 Gereral Purpose Smart Pressure Sensors for Hazardous Locations 206. Dynisco reserves the right to make changes without notice. Refer to for access to perator Manual and other support documentation. P/N: DSSPX4SERIES REV: 6 EC: Dynisco Hotline -800-Dynisco Dynisco Europe, GmbH Dynisco Shanghai 38 Forge Parkway Pfaffemstr. 2 Phone uilding 7, No. 568 Phone Franklin, M Phone Hellbronn Fax Longpan Rd Malu Toll Free US Fax Germany dyniscoeurope@dynisco.com Jiading, 2080 China Fax infoinst@dynisco.com

Dynisco SPX 2-Series. Description. Features. General Purpose Smart Pressure Sensors for Hazardous Locations

Dynisco SPX 2-Series. Description. Features. General Purpose Smart Pressure Sensors for Hazardous Locations From lab to production, providing a window into the process Dynisco SPX 2-Series General Purpose Smart Pressure Sensors for Hazardous Locations Description The Dynisco SPX 2-Series is a smart 4-20m pressure