04 Seals Seals 04 84

Transcription

1

2

3 Fluid Power Fluid Power Outstanding Sealing Solutions for Standard Housings Merkel rod seal and wiper systems Combination PRW 1 T 20 OMS-MR PR Functional safety even under extreme operating conditions (e.g. pressure peaks > 500 bar) Low friction Highest tightness even for long strokes. Suitable for very low and fast running speeds (e.g. loading crane) PRW 1 T 20 OMS-MR PR Combination AU PS T 20 Syprim SM Functional safety even under extreme operating conditions (e.g. pressure peaks > 500 bar) Highest tightness even with high volumes of dirt and temperature fluctuations (e.g. construction machinery) Simple installation AU PS T 20 Syprim SM Combination PRW 1 T 20 Optimal price/performance ratio Highest tightness through additional seal and pressure relief functions (patented) incorporated into the wiper Less space needed and simple installation Universal application possibilities PRW 1 T 20 Approved Distributor

4 Freudenberg Group Freudenberg Group Merkel rod and piston guides Merkel piston seals Guivex SBK/KBK Very high loading capacity (up to 80 N/mm ) 2 Functional safety even under extreme conditions (e.g. tangential deviation) through patented Guivex geometry Guivex SBK/KBK Simko 300 (Polyurethane) Highest tightness ensures security against drift/dropping Optimal price/performance ratio Simple installation Universal application possibilities Simko 300 SB/KB (fabric-base laminate) High loading capacity (up to 50 N/mm ) 2 Secure function even at high temperatures through phenolic resin material matrix FRI/FRA (Thermoplastic) Able to work under loads up to 40 N/mm 2 Optimal price/performance ratio Simple installation SB/KB (fabric-base laminate) FRI/FRA (Thermoplastic) OMK-MR (PTFE) Suitable for extremely low or high running speeds (< 0.05 m/s > 0.8 m/s) For high temperatures (up to 200 C) Very low friction HDP 330 (Polyamide) For applications with extreme operating conditions (e.g. construction machinery, pressure peaks > 500 bar) Large surface roughness acceptable Running over bore holes possible OMK-MR HDP 330

5 Drive Technology Freudenberg Group System safety is our driving force Simrit seal know-how for drive technology Simrit keeps your drive systems moving. With more than 16,000 standard products and a wide variety of custom solutions, we offer innovative sealing technology for the entire drive train, including products essential for motors, clutches, transmissions, brakes and drive shafts. Troublefree and reliable. Thanks to the integration of modern Condition Monitoring functions and the most appropriate lubrication materials concepts and frictionreducing designs, we are able to offer the highest level of operational reliability and economical operations. Any time. For further details please contact your local Brammer Sales and Service Centre. Approved Distributor

6 Mechanical Vulcan Conical Spring Type 7D Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B Type 8 Resilient, conical spring, O -Ring mounted DIN standard seal, with the advantage of being able to replace the faces. The seal is very versatile and is suitable for a large variety of general and arduous duty applications. Pricing shown is for materials highlighted below: Materials available for this range Elastomers Nitrile, Viton, EPDM. Rotary Seal Face Materials Ceramic, Silicon Carbide Stationary Seat Face Materials Carbon, Silicon Carbide Pressure: 170 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B WXF D.R.N.B Conical spring, O -Ring mounted seal with a wide choice of elastomers and face materials. Suitable for a large variety of general duties and arduous duty applications, including those needing high pv value face combinations, and DIN Housing dimensions. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 180 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available in alternative dimensions and seat options For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Contact Brammer on

7 4 Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF L.R.N.C WXF L.R.N.C Type 12 Type 9L Conical spring, O -Ring mounted seal, with a monolithic rotary face, available as Type 9L with long seat (as shown) or Type 9 with short O -Ring mounted seat. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide Stationary Seat Face Materials Ceramic, Carbon, Silicon Carbide, Tungsten Carbide. Pressure: 160 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternative dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C WXF L.R.N.C A range of highly proficient, widely utilised, O -Ring mounted, conical spring seals with solid, stainless steel head and carbon seat. Suitable for a wide variety of duties and to suit common standard and DIN housing dimensions. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Stainless Steel, Silicon Carbide. Stationary Seat Face Materials Carbon, Silicon Carbide. Pressure: 160 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternate dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P Everything you need when you need it Tel:

8 Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P WXF R.N.P Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B WXF R.N.B Vulcan Elastomeric Bellows 4 Type 14 Type 13 O -Ring mounted, conical spring seal with pressed stainless seal head retainer and pressed carbon seat to suit common standard and DIN housings. Highly productionised seal capable of wide ranging service. Seal and seat faces can be interchanged with each other and can be easily replaced. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Ceramic, Silicon Carbide, Tungsten Carbide, Carbon. Stationary Seat Face Materials Carbon, Silicon Carbide, Tungsten Carbide, Ceramic. Pressure: 160 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternate dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please Universal compact DIN seal and seat available with different DIN standard working lengths. This robust, heavy duty bellows design provides excellent flexibility and durability. The seal is supplied as standard with a boot mounted seat, however, alternate 'O'-ring mounted seats are available. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 170 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternate dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please Contact Brammer on

9 4 Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C WXF DIN.N.C Type 19 Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 200 psi Speed: 20 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternate dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Type 1520 A robust rubber bellows seal, with a wide non-din cross section, for optimum flexibility and durability. Also available with extended bellows to meet DIN L1K and L1N working lengths. Supplied as standard with a non-din seat, with a wide range of alternative O -ring and boot mounted seats available. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials 92 Nationwide coverage, delivered locally same or next day Tel:

10 Type Metric and imperial DIN profile seals and seat with working lengths to suit a common international standard (metric dimensions shown). Seal has same working length and the same seat as our Type 20 and is suitable for general duties. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 170 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is also available in imperial dimensions. For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C High performance, wide duty, full convolution rubber bellows seal inside a stainless steel housing. Type 1724 features a non-clogging spring and self alignment capability and is offered with a choice of Type 24 boot mounted (shown) or O -Ring Short or Long DIN seats Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile,Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 260 psi Speed: 18 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternative seats For price and delivery information of any seal type, shaft size or materials that are not listed, please Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Contact Brammer on

11 4 Vulcan Parallel Spring Diaphragm Type 20 Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Type 11 Single spring, rubber diaphragm seal with boot mounted seat as standard. Available for metric and imperial shaft sizes (metric shown), a widely specified and utilised seal type, capable of long service life. Alternative version with longer working length available Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 180 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternative dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please contact your local Brammer Sales and Service Centre for details. Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Metric and imperial single spring, rubber diaphragm shaft seal (imperial shown), designed for different sized seat housings and seal working lengths to the Types Imperial sizes are most commonly found on American equipment. Alternative version with longer working length available. Pricing shown is for materials highlighted below. Materials available for this range Elastomers Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 180 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternate dimensions and seats For price and delivery information of any seal type, shaft size or materials that are not listed, please contact your local Brammer Sales and Service Centre for details. Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Brammer Sales & Service Centres nationwide Tel:

12 Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Type 24 Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C WXF N.C Compact single spring, rubber diaphragm seal specifically designed to comply with DIN (EN12756) housings. Shown with boot mounted seat, but also often specified with an O -Ring mounted DIN Long or Short seat. Pricing shown is for materials highlighted below; Materials available for this range Elastomers For +GF+ pipework, see our Process section Nitrile, Viton, EPDM Rotary Seal Face Materials Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide. Pressure: 180 psi Speed: 15 m/s Temperature: C Dependent upon shaft diameter, speed, temperature and media to be sealed This design of seal is available with alternative seats. For price and delivery information of any seal type, shaft size or materials that are not listed, please Contact Brammer on

13 4 Vulcan Multi Spring Type 40L Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD Vulcan Wave Spring Type 1688L Vulcan Type 40 is a multiple-spring, O -ring mounted, set-screw driven, non-clogging, balanced mechanical seal. The balanced design, protected springs and dynamic O -ring enable use in demanding applications. Available with a wide variety of seats, Types 40L are illustrated here. Pricing shown is for materials highlighted below; Materials available for this range Elastomers Nitrile, Viton, EPDM. Rotary Seal Face Materials Antimony Carbon, Silicon Carbide, Tungsten Carbide. Stationary Seat Face Materials Ceramic, Silicon Carbide, Tungsten Carbide Pressure 350 psi Speed 25 m/s Temperature C Dependent upon shaft diameter, speed, temperature and media to be sealed Please note For price and delivery information of any seal type, shaft size or materials that are not listed, please contact your local Brammer Sales and Service Centre for details. Order Code Product Code Metric Shaft Size DØ D1 D2 L1 L2 1+ WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD WXF L.N.AD Rotary based wave sprung mechanical seal with thin cross section and short working length, supplied as standard with Vulcan Type 24 DIN long seat. Most commonly used on rotary lobe pumps found extensively in the food, process, dairy and brewery industries. Popular, common sizes are fitted with Vulcan s Sinusoidal Split Wave-Springs. Pricing shown is for materials highlighted below; Materials available for this range Elastomers Nitrile, Viton, EPDM. Rotary Seal Face Materials Stainless Steel, Tungsten Carbide. Stationary Seat Face Materials Carbon, Silicon Carbide, Tungsten Carbide Pressure 150 psi Speed 15 m/s Temperature C Dependent upon shaft diameter, speed, temperature and media to be sealed Please note For price and delivery information of any seal type, shaft size or materials that are not listed, please contact your local Brammer Sales and Service Centre for details. Order Code Product Code Metric Shaft Size Ø D1 D2 L1 L2 1+ WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P We work harder to save you money and downtime Tel:

14 Order Code Product Code Metric Shaft Size Ø D1 D2 L1 L2 1+ WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF L.N.P WXF8662 VT2.1/8X30MTR VT2 1/8" 30 metre WXF8663 VT2.3/16X30MTR VT2 3/16" 30 metre WXF8664 VT2.1/4X8MTR VT2 1/4" 8 metre WXF8665 VT2.5/16X8MTR VT2 5/16" 8 metre WXF8666 VT2.3/8X8MTR VT2 3/8" 8 metre WXF8667 VT2.7/16X8MTR VT2 7/16" 8 metre WXF8668 VT2.1/2X8MTR VT2 1/2" 8 metre WXF8669 VT2.9/16X8MTR VT2 9/16" 8 metre WXF8670 VT2.5/8X8MTR VT2 5/8" 8 metre WXF8671 VT2.3/4X8MTR VT2 3/4" 8 metre WXF8672 VT2.7/8X8MTR VT2 7/8" 8 metre WXF8673 VT2.1.0X8MTR VT2 1.0" 8 metre Vulcan Type VG2 4 Gland Packings PAN Fibre Packings Vulcan Type VT2 Vulcan VG2 is constructed using a composite yarn manufactured from high quality P.A.N fibres combined with pure Carbon fibres. The in-built lubrication and superior packing fibre properties of this composite yarn are further enhanced by a thorough graphite impregnation and high temperature lubricants. Vulcan VG2 is a soft, conformable packing, with a square, inter-braided lattice construction, which creates improved sealing contact with less gland pressure. The self-lubricating P.A.N. fibre, re-inforced with carbon and heavily coated and impregnated with graphite lubricants, practically eliminates shaft scoring. VG2 gives extended packing life, with reduced shaft wear and gland maintenance. Vulcan VT2 is braided from pure Poly Acrylic Nitrile (P.A.N.) fibres which are the basis of outstanding capabilities and performance of our P.A.N Fibre Packings. To maximise the performance of this remarkable synthetic fibre, VT2 is thoroughly impregnated, yarn by yarn, with heavy PTFE dispersion and further treated with special silicone-free lubricants. Type VT2 has been specifically designed to replace traditional packings, giving enhanced performance without the shaft wear problems or the elevated costs of other synthetic fibres. VT2 is a true, high specification, process industry packing. The combination of an exceptional packing fibre with advanced lubrication, gives a clean, smooth running packing, for extended life even at high shaft speeds and pressures with a wide Ph and temperature range. Wide variety of process plant including pumps, valves, mixers, reactor vessels and reciprocating applications. Against general chemicals, solvents, oils, water and steam. A wide ranging packing, for use in arduous conditions in process applications, especially where alternative packings contaminate, cause excessive wear or require frequent maintenance and replacement. VT2 does not contaminate nor stain, making it particularly suitable for use in the food, water and paper industries. Pressure Rating: 100 Bar Temperature: C Rotary Speed: 18 m/s ph Range: 2-14 Vulcan VG2 is an exceptional performance and cost general purpose packing suitable for plant applications. Designed to replace and out-perform traditional Graphited Asbestos, Glass Fibre and Natural Fibre packing Suitable for use against oils, water, steam, solvents and general chemicals. Pressure Rating: 80 Bar Temperature: C Rotary Speed: 10 m/s ph Range: 4-12 WXF8674 VG2.1/8X30MTR VG2 1/8" 30 metre WXF8675 VG2.3/16X30MTR VG2 3/16" 30 metre WXF8676 VG2.1/4X8MTR VG2 1/4" 8 metre WXF8677 VG2.5/16X8MTR VG2 5/16" 8 metre WXF8678 VG2.3/8X8MTR VG2 3/8" 8 metre WXF8679 VG2.7/16X8MTR VG2 7/16" 8 metre WXF8680 VG2.1/2X8MTR VG2 1/2" 8 metre WXF8681 VG2.9/16X8MTR VG2 9/16" 8 metre WXF8682 VG2.5/8X8MTR VG2 5/8" 8 metre WXF8683 VG2.3/4X8MTR VG2 3/4" 8 metre WXF8684 VG2.7/8X8MTR VG2 7/8" 8 metre WXF8685 VG2.1.0X8MTR VG2 1.0" 8 metre Contact Brammer on

15 SKF Economos Quality sealing and engineering plastic solutions The SKF Economos Group is market and technology leader for custom engineered sealing solutions. Thanks to the diversity of our product range, the SKF Economos Group is successfully active in all industry sectors. We see our customers as our partners - from the concept phase to serial production - with the common aim to achieve highest quality most cost effective, from machined prototypes to injection moulded high volume orders. Together with our customers, we discuss all processes and find efficient solutions. New seal designs and the application of superior materials reduces break down periods during the production phase and result in extended service intervals. Our technical competence and sealing know-how permits us to offer the best sealing solutions and Advanced Engineered Plastic Parts (AEPPs) for specific applications. SKF Economos products and services have proved highly successful and are used in many industries. SKF (U.K.) Limited Sealing Solutions

16

17 4 Glass Fibre Packings Vulcan Type VG8L Vulcan Type VG1D Vulcan VG8L is interbraided from continuous filament, textured, air-blown glass yarns. The glass fibres are heavily lubricated and thoroughly impregnated with PTFE dispersion and an inert lubrication, both prior to and subsequent to braiding. Vulcan VG8L can replace packings in general, non-arduous duties, whilst being of superior square inter-braid construction. Consider that Type VG8L s air-blown glass fibres are kinder to the shaft and you have a naturally square packing that will seal with less gland pressure, significantly reduce shaft wear and gland adjustment and thus increase packing life in light duties Type VG8L is a smooth, cool running packing for a wide variety of uses in a plant. Particularly useful on water and mildly abrasive slurries, solvents and chemicals in reciprocating and centrifugal pumps, mixers and valves. Vulcan alternative Type VG8D is the self-same packing but the inert lubricants are replaced by an increased PTFE dispersion. VG8D is designed as a valve packing that is also suitable for a variety of static or slow moving applications up to 4 m/s. Pressure Rating: 150 Bar Temperature: C Rotary Speed: 12 m/s ph Range: 2-12 WXF8686 VG8L.1/8X8MTR VG8L 1/8" 8 metre WXF8687 VG8L.3/16X8MTR VG8L 3/16" 8 metre WXF8688 VG8L.1/4X8MTR VG8L 1/4" 8 metre WXF8689 VG8L.5/16X8MTR VG8L 5/16" 8 metre WXF8690 VG8L.3/8X8MTR VG8L 3/8" 8 metre WXF8691 VG8L.7/16X8MTR VG8L 7/16" 8 metre WXF8692 VG8L.1/2X8MTR VG8L 1/2" 8 metre WXF8693 VG8L.9/16X8MTR VG8L 9/16" 8 metre WXF8694 VG8L.5/8X8MTR VG8L 5/8" 8 metre WXF8695 VG8L.3/4X8MTR VG8L 3/4" 8 metre WXF8696 VG8L.7/8X8MTR VG8L 7/8" 8 metre WXF8697 VG8L.1.0X8MTR VG8L 1.0" 8 metre Vulcan Type VG1D is square braided from continuous filament, texturised glass fibres re-inforced with Inconel wire and impregnated yarn by yarn with pure Graphite powder and a corrosion inhibitor. Type VG1D Graphited Glass packing is designed as a substitute to classic Asbestos packings with high temperature capability. The addition of Inconel wire reinforcement results in a true high pressure and high temperature traditional valve packing that has the advantage of being non-asbestos. General purpose, non-asbestos valve packing against steam, water, oils, air, alkalis, mild acids and chemicals. Not suitable for very arduous conditions. Pressure Rating: 250 Bar Temperature: C Rotary Speed: 1 m/s ph Range: 4-11 WXF8698 VG1D.1/8X8MTR VG1D 1/8" 8 metre 9.29 WXF8699 VG1D.3/16X8MTR VG1D 3/16" 8 metre WXF8700 VG1D.1/4X8MTR VG1D 1/4" 8 metre WXF8701 VG1D.5/16X8MTR VG1D 5/16" 8 metre WXF8702 VG1D.3/8X8MTR VG1D 3/8" 8 metre WXF8703 VG1D.7/16X8MTR VG1D 7/16" 8 metre WXF8704 VG1D.1/2X8MTR VG1D 1/2" 8 metre WXF8705 VG1D.9/16X8MTR VG1D 9/16" 8 metre WXF8706 VG1D.5/8X8MTR VG1D 5/8" 8 metre WXF8707 VG1D.3/4X8MTR VG1D 3/4" 8 metre WXF8708 VG1D.7/8X8MTR VG1D 7/8" 8 metre WXF8709 VG1D.1.0X8MTR VG1D 1.0" 8 metre For Crosland lters, see our new Filtration section For switching and sensing devices, see our Low Voltage Gear section 100 FREE 24/7 technical support Tel:

18 Kevlar Aramid Fibre Packings Vulcan Type VK4 4 Vulcan Type VK4B Vulcan VK4B is an interlace, square braid packing manufactured from KEVLAR Aramid fibres impregnated with PTFE dispersion and specially treated with temperature break-in lubricant. KEVLAR offers a unique combination of extremely high tensile strength, lasting resilience, low thermal expansion, low coefficient of friction and wide chemical resistance. Vulcan VK4B KEVLAR gold fibre packing is a true multi-service packing that is well suited to the needs of many industries, particularly where physical strength in a packing is required. The strength of KEVLAR is ideal for use as an anti-extrusion, abrasion resistant back-up ring, with other packing types, to increase the life of any packing combination. For pumps (rotary and reciprocating) and valves, including high pressure or high mechanical loading conditions, against abrasive slurries, sewage, effluents, water, oil, solvents and most chemicals. Pressure Rating: 400 Bar Temperature: C Rotary Speed: 15 m/s ph Range: 1-13 WXF8710 VK4B.1/8X8MTR VK4B 1/8" 8 metre WXF8711 VK4B.3/16X8MTR VK4B 3/16" 8 metre WXF8712 VK4B.1/4X8MTR VK4B 1/4" 8 metre WXF8713 VK4B.5/16X8MTR VK4B 5/16" 8 metre WXF8714 VK4B.3/8X8MTR VK4B 3/8" 8 metre WXF8715 VK4B.7/16X8MTR VK4B 7/16" 8 metre WXF8716 VK4B.1/2X8MTR VK4B 1/2" 8 metre WXF8717 VK4B.9/16X8MTR VK4B 9/16" 8 metre WXF8718 VK4B.5/8X8MTR VK4B 5/8" 8 metre WXF8719 VK4B.3/4X8MTR VK4B 3/4" 8 metre WXF8720 VK4B.7/8X8MTR VK4B 7/8" 8 metre WXF8721 VK4B.1.0X8MTR VK4B 1.0" 8 metre Vulcan VK4 is manufactured from KEVLAR Aramid fibres. In order to get maximum benefit from this material, VK4 is specially treated with a high concentration of resilient, food quality lubricants and heavy PTFE dispersion. The resulting packing significantly reduces the shaft wear problems which have sometimes been associated with other KEVLAR packings and, with this increased lubrication, higher shaft speeds of up to 20m/s can be handled. VK4 KEVLAR Aramid fibre lube packing, is a durable, economic general service packing for 80% of plant needs. The strength of fibre and construction of Vulcan VK4 leads to long packing life with extended periods between necessary gland adjustments. For rotary and reciprocating pumps, stern glands, hydraulic presses, mixers and valves against abrasive slurries, sewage, effluents, water, oils, solvents and all except aggressive chemicals. Non-staining lubrication and resilient performance make Vulcan VK4 ideal for use in the paper industry. Pressure Rating: 150 Bar Temperature: C Rotary Speed: 20 m/s ph Range: 1-13 WXF8722 VK4.1/8X8MTR VK4 1/8" 8 metre WXF8723 VK4.3/16X8MTR VK4 3/16" 8 metre WXF8724 VK4.1/4X8MTR VK4 1/4" 8 metre WXF8725 VK4.5/16X8MTR VK4 5/16" 8 metre WXF8726 VK4.3/8X8MTR VK4 3/8" 8 metre WXF8727 VK4.7/16X8MTR VK4 7/16" 8 metre WXF8728 VK4.1/2X8MTR VK4 1/2" 8 metre WXF8729 VK4.9/16X8MTR VK4 9/16" 8 metre WXF8730 VK4.5/8X8MTR VK4 5/8" 8 metre WXF8731 VK4.3/4X8MTR VK4 3/4" 8 metre WXF8732 VK4.7/8X8MTR VK4 7/8" 8 metre WXF8733 VK4.1.0X8MTR VK4 1.0" 8 metre For Crane valves, see our Process section For Washdown equipment, see our Process section Contact Brammer on

19 4 Aramid Fibre Packings Vulcan Type VK1L / VK1D Vulcan Type VM1 Vulcan VM1 is a Universal Paper-Mill and Sugar-Mill Packing, made of a unique Aramidic composite fibre. This special fibres combines an exceptionally high tensile strength (27,000 Kg/cm2), outstanding heat resistance, linked to low friction and excellent cool running properties. This is a strong Thermoset fibre packing but it is also extremely soft, assisted by our exclusive, three stage lubrication progress. The low-friction factor reduces abrasion to upto 1/10 of Aramidic fibres, giving high reliability and life, even in the most demanding of applications. VM1 is heat resistant and will not glaze, like usual paper mill and PTFE packings, even at high shaft speeds. Type VM5 is a very similar product in more economical form. It will provide the same service but care must be taken not to over-tighten the gland nor starve the packing of product or flush lubrication. Universal Paper-Mill, Sugar-Mill and demanding application packing, that is white non-staining, with excellent chemical resistance and is suitable for Kraft processes. Easy to cut and install, fast to break-in and with low susceptibility to adverse conditions, at installation or in-use. Pressure Rating: 130 Bar Temperature: C Rotary Speed: 20 m/s ph Range: 2-12 WXF8734 VM1.1/8X8MTR VM1 1/8" 8 metre WXF8735 VM1.3/16X8MTR VM1 3/16" 8 metre WXF8736 VM1.1/4X8MTR VM1 1/4" 8 metre WXF8737 VM1.5/16X8MTR VM1 5/16" 8 metre WXF8738 VM1.3/8X8MTR VM1 3/8" 8 metre WXF8739 VM1.7/16X8MTR VM1 7/16" 8 metre WXF8740 VM1.1/2X8MTR VM1 1/2" 8 metre WXF8741 VM1.9/16X8MTR VM1 9/16" 8 metre WXF8742 VM1.5/8X8MTR VM1 5/8" 8 metre WXF8743 VM1.3/4X8MTR VM1 3/4" 8 metre WXF8744 VM1.7/8X8MTR VM1 7/8" 8 metre 1, WXF8745 VM1.1.0X8MTR VM1 1.0" 8 metre 1, Vulcan Type VK1L has been designed to replace and outlast traditional packings, particularly in abrasive media and high pressure rotary applications. VK1L is a square-braided packing made from KEVLAR Aramid fibres thoroughly impregnated with pure Graphite powder and inert lubricant. The performance of the packing is further enhanced with corrosion inhibitors and Molybdenum Disulphide lubricant. Vulcan Style VK1D is inter-braided from KEVLAR Aramid fibres further re-inforced with Inconel wire and impregnated with pure graphite and a corrosion inhibitor. VK1L is a general purpose, wide-ranging, durable arduous duty packing. For use in rotary, reciprocating and static applications particularly against abrasive fluids, weak chemicals and water. Vulcan VK1D is a high strength valve packing also suitable for plunger pumps, turbines and static seals. Particularly for use against oils, air, water, hot steam and asphalt. Pressure Rating: 200 Bar (VK1L) Pressure Rating: 400 Bar (VK1D) Temperature: C Rotary Speed: 12 m/s (VK1L) Rotary Speed: 1 m/s (VK1D) ph Range: 1-13 WXF8746 VK1L.1/8X8MTR VK1L 1/8" 8 metre 9.29 WXF8747 VK1L.3/16X8MTR VK1L 3/16" 8 metre WXF8748 VK1L.1/4X8MTR VK1L 1/4" 8 metre WXF8749 VK1L.5/16X8MTR VK1L 5/16" 8 metre WXF8750 VK1L.3/8X8MTR VK1L 3/8" 8 metre WXF8751 VK1L.7/16X8MTR VK1L 7/16" 8 metre WXF8752 VK1L.1/2X8MTR VK1L 1/2" 8 metre WXF8753 VK1L.9/16X8MTR VK1L 9/16" 8 metre WXF8754 VK1L.5/8X8MTR VK1L 5/8" 8 metre WXF8755 VK1L.3/4X8MTR VK1L 3/4" 8 metre WXF8756 VK1L.7/8X8MTR VK1L 7/8" 8 metre WXF8757 VK1L.1.0X8MTR VK1L 1.0" 8 metre Everything you need when you need it Tel:

20 Vulcan Type VK5 PTFE Packings 4 Vulcan Type VT9D Vulcan Type VK5 combines the benefits of the remarkable properties of two outstanding gland packing fibres. GFO has the best combination of features of any packing fibre but it may extrude or deteriorate in high mechanical loading conditions. The addition of Dupont's KEVLAR adds steel-like strength. VK5 GFO KEVLAR combi-packing is square inter-braided to add the strength of KEVLAR where it is most needed on the corner-posts. KEVLAR fibres are specially braided from the core to the corner-posts for dimensional stability and to resist extrusion. The GFO yarns are braided to the packing surfaces to enhance smooth running and sealing capability. Vulcan VK5 is the packing for extended life in high pressure or mechanical load conditions, particularly on worn or large tolerance equipment and in the most demanding chemical environments. Shaft wear is virtually eliminated, and high speeds and aggressive chemicals can be handled, because of the presence of GFO on the sealing faces. Extrusion and gland maintenance is negligible, even in the most arduous of applications, due to the inter-locked braiding of KEVLAR. Type VK5 combines mechanical strength with surface lubricity to give a long lasting, high performance sealing, near universal packing, for use in all rotary, reciprocating and static gland applications. Pressure Rating: 250 Bar Temperature: C Rotary Speed: 25 m/s ph Range: 0-14 WXF8758 VK5.1/8X8MTR VK5 1/8" 8 metre WXF8759 VK5.3/16X8MTR VK5 3/16" 8 metre WXF8760 VK5.1/4X8MTR VK5 1/4" 8 metre WXF8761 VK5.5/16X8MTR VK5 5/16" 8 metre WXF8762 VK5.3/8X8MTR VK5 3/8" 8 metre WXF8763 VK5.7/16X8MTR VK5 7/16" 8 metre WXF8764 VK5.1/2X8MTR VK5 1/2" 8 metre WXF8765 VK5.9/16X8MTR VK5 9/16" 8 metre WXF8766 VK5.5/8X8MTR VK5 5/8" 8 metre WXF8767 VK5.3/4X8MTR VK5 3/4" 8 metre WXF8768 VK5.7/8X8MTR VK5 7/8" 8 metre WXF8769 VK5.1.0X8MTR VK5 1.0" 8 metre 1, Vulcan VT9D is solely manufactured from pure PTFE in the form of fine multi-filament yarns. The PTFE yarns are further vacuum impregnated with PTFE dispersion to enable the packing to handle steam and gas services as well as liquids. This PTFE packing offers exceptional chemical resistance along with high strength and low coefficient of friction. The interbraid construction and the fact that VT9D will not harden in service over many years usage, ensures that a valve packed with Vulcan VT9D is packed for life. As a packing seal, VT9D is far superior to machined or moulded PTFE rings in that its tensile strength is twenty times higher, but at a fraction of the cost. VT9D has a tensile strength of up to 50,000 PSI (3,500Kg/cm2). For low speed pumps, mixers, reciprocating rods and valves against the strongest chemicals, solvents and steam. Exceptions are molten and alkali metal and fluorine. Pressure Rating: 200 Bar Temperature: C Rotary Speed: 6 m/s ph Range: 0-14 WXF8770 VT9D.1/8X8MTR VT9D 1/8" 8 metre WXF8771 VT9D.3/16X8MTR VT9D 3/16" 8 metre WXF8772 VT9D.1/4X8MTR VT9D 1/4" 8 metre WXF8773 VT9D.5/16X8MTR VT9D 5/16" 8 metre WXF8774 VT9D.3/8X8MTR VT9D 3/8" 8 metre WXF8775 VT9D.7/16X8MTR VT9D 7/16" 8 metre WXF8776 VT9D.1/2X8MTR VT9D 1/2" 8 metre WXF8777 VT9D.9/16X8MTR VT9D 9/16" 8 metre WXF8778 VT9D.5/8X8MTR VT9D 5/8" 8 metre WXF8779 VT9D.3/4X8MTR VT9D 3/4" 8 metre WXF8780 VT9D.7/8X8MTR VT9D 7/8" 8 metre WXF8781 VT9D.1.0X8MTR VT9D 1.0" 8 metre 1, Contact Brammer on

21 4 PTFE Graphite Packings Vulcan Type VP2 Vulcan Type VP1 Vulcan Type VP1 is 100% GORE GFO fibre packing. This remarkable yarn is constructed from PTFE and Graphite intimately blended and locked and then treated with a high temperature, break-in lubricant. Vulcan VP1 is an outstanding packing for use in aggressive or arduous duties including the most difficult chemical environments. It is essentially chemically inert over the entire ph range. The unique combination of locked graphite and PTFE creates a yarn with very high thermal conductivity, that does not harden, shrink, swell nor dry out and that is exceptionally smooth that, in practically all cases, greatly extended service life can be expected. In order to obtain maximum benefit from this fibre, Vulcan VP1 is square interbraided via a CROSS-LOK process. The construction of VP1 increases the durability of the packing and reduces the gland pressure required to form a seal. Periods between gland maintenance and packing replacements are thus even further extended and Type VP1 CROSS-LOK braiding helps overcome extrusion problems, which can be the one negative of this fibre, particularly in lower quality braids. See Vulcan Style VP2 Pressure Rating: 120 Bar Temperature: C Rotary Speed: 25 m/s ph Range: 0-14 WXF8782 VP1.1/8X8MTR VP1 1/8" 8 metre WXF8783 VP1.3/16X8MTR VP1 3/16" 8 metre WXF8784 VP1.1/4X8MTR VP1 1/4" 8 metre WXF8785 VP1.5/16X8MTR VP1 5/16" 8 metre WXF8786 VP1.3/8X8MTR VP1 3/8" 8 metre WXF8787 VP1.7/16X8MTR VP1 7/16" 8 metre WXF8788 VP1.1/2X8MTR VP1 1/2" 8 metre WXF8789 VP1.9/16X8MTR VP1 9/16" 8 metre WXF8790 VP1.5/8X8MTR VP1 5/8" 8 metre WXF8791 VP1.3/4X8MTR VP1 3/4" 8 metre WXF8792 VP1.7/8X8MTR VP1 7/8" 8 metre WXF8793 VP1.1.0X8MTR VP1 1.0" 8 metre VP2 packing is manufactured from 100% Vulcan Type G1 fibre. This newly developed outstanding yarn is very similar in material construction to the original GORE GFO fibre and has been manufactured to optimise performance at an improved cost. G1 yarn is constructed from PTFE tape and graphite inter-locked to create a true synergy between these two premier packing materials. High temperature break-in and running lubricants are added to the yarns, prior to braiding in our CROSS-LOK lattice. The result is an exceptional process packing that gives, often many times, longer service life in the vast majority of applications. With the exceptions, if high mechanical load (highly abrasive media or high pressure) or temperatures above PTFE s limit of 280ºc, Vulcan VP2 is the ultimate packing. Vulcan VP2 resists all chemicals across the entire Ph range (except Oleum, Aqua, Regia, fuming Nitric Acid and Fluorine), is self lubricating and does not shrink, harden nor dry out. The packing is very cool running with exceptionally good thermal conductivity thus practically eliminating shaft scoring. For use whenever the value of the best quality and material packing can be realised. Since the actual purchase cost of a packing is typically only 3% of the true utilisation cost, Vulcan recommend these PTFE GRAPHITE packings for all possible applications. They will increase service life whilst minimising wear and gland adjustments, against nearly all media in static, rotary and reciprocating uses. Pressure Rating: 120 Bar Temperature: C Rotary Speed: 25 m/s ph Range: 0-14 WXF8794 VP2.1/8X8MTR VP2 1/8" 8 metre WXF8795 VP2.3/16X8MTR VP2 3/16" 8 metre WXF8796 VP2.1/4X8MTR VP2 1/4" 8 metre WXF8797 VP2.5/16X8MTR VP2 5/16" 8 metre WXF8798 VP2.3/8X8MTR VP2 3/8" 8 metre WXF8799 VP2.7/16X8MTR VP2 7/16" 8 metre WXF8800 VP2.1/2X8MTR VP2 1/2" 8 metre WXF8801 VP2.9/16X8MTR VP2 9/16" 8 metre WXF8802 VP2.5/8X8MTR VP2 5/8" 8 metre WXF8803 VP2.3/4X8MTR VP2 3/4" 8 metre WXF8804 VP2.7/8X8MTR VP2 7/8" 8 metre WXF8805 VP2.1.0X8MTR VP2 1.0" 8 metre Nationwide coverage, delivered locally same or next day Tel:

22 Vulcan Type VT8 Carbon Graphite Fibre Packings 4 Vulcan Type VC5 / VC51 Vulcan Type VT8 is supplied as a double construction of a 100% unsintered PTFE core with a spiral covering of PTFE tape. VT8 provides the versatility of an extruded malleable core with the additional strength and extrusion resistance of the PTFE tape covering. The result is a low friction, extrusion resistant, TEFLON packing with near universal chemical resistance. VT2 is a true, high specification, process industry packing. The combination of an exceptional packing fibre with advanced lubrication, gives a clean, smooth running packing, for extended life even at high shaft speeds and pressures with a wide Ph and temperature range. VT8 will not harden nor shrink in application and provides an instant packing and instant gasket on one very economical spool. In valves, wrap VT8 round the stem to fill the gland (no need for cut rings), tighten the gland follower and the PTFE moulds to form a tight leak free seal. Universal PTFE sealing material for gasketing and life-long valve packing. For practically all chemicals. Not suitable for liquid or gaseous oxygen. Pressure Rating: 150 Bar Temperature: C Rotary Speed: 1 m/s ph Range: 0-14 WXF8806 VT8.3/32X8MTR VT8.3/32 8 metre WXF8807 VT8.5/32X8MTR VT8.5/32 8 metre WXF8808 VT8.7/32X8MTR VT8.7/32 8 metre WXF8809 VT8.9/32X8MTR VT8.9/32 8 metre Vulcan VC5 is square-braided from high quality carbon yarns impregnated with pure Graphite, special high temperature lubricants and Molybdenum Disulphide. The Carbon yarns are dense braided to provide a near frictionless, self-lubricating seal. Graphite powder provide non-migrating lubrication between the packing and the shaft. The non-glazing, high temperature lubricant protects during the packing break-in period. The addition of Molybdenum Disulphide gives high temperature and high pressure lubrication with shaft wear protection even when contact pressures between packing and shaft are excessive. Type VG5 Carbon Fibre packing is swift to break-in because of its low friction, lubricants intensive constituents and these characteristics allow its extended life in arduous duties. Vulcan Type VC5 can be used in services where many other lubricated fibre packing fail, due to migration or loss of lubrication and consequent fibre burning, hardening or glazing. Type VC51 is Inconel wire re-inforced for high pressure static application to 350 Bar to give an exceptional capability, performance and lasting value packing for use up to 1 m/s. VC5 is ideal as a rotary duty, multi-service, packing particularly for boiler feed applications Pressure Rating: 200 Bar (VC5) Temperature: C (VC5) Rotary Speed: 15 m/s (VC5) ph Range: 3-12 (VC5) WXF8818 VC5.1/8X8MTR VC5 1/8" 8 metre WXF8819 VC5.3/16X8MTR VC5 3/16" 8 metre WXF8820 VC5.1/4X8MTR VC5 1/4" 8 metre WXF8821 VC5.5/16X8MTR VC5 5/16" 8 metre WXF8822 VC5.3/8X8MTR VC5 3/8" 8 metre WXF8823 VC5.7/16X8MTR VC5 7/16" 8 metre WXF8824 VC5.1/2X8MTR VC5 1/2" 8 metre WXF8825 VC5.9/16X8MTR VC5 9/16" 8 metre WXF8826 VC5.5/8X8MTR VC5 5/8" 8 metre WXF8827 VC5.3/4X8MTR VC5 3/4" 8 metre WXF8828 VC5.7/8X8MTR VC5 7/8" 8 metre WXF8829 VC5.1.0X8MTR VC5 1.0" 8 metre Contact Brammer on

23 4 Expanded Graphite Packings Natural Fibres Packings Vulcan Type VR3 / VR31 Vulcan Type VC6 Vulcan s Type VR3 and VR31 is a braided packing, constructed from 100% Grafan yarns, to form a truly exceptional capability and performance, pure expanded Graphite packing. VR31 is additionally re-inforced with Inconel wire to create the ideal packing for high temperature, high pressure values. Under compression in the gland, Types VR3 / VR31 die-forms into packing rings, whilst offering the advantage of avoiding the need to laboriously wrap ribbon tape around valve stems or the cost of an inventory of many sizes of individual die-formed rings. VR31 can be merely cut to length and spiralled into the gland. There is no need for individual cut rings, as is the case with conventional braided packings. Grafan is self-lubricating and will not shrink nor harden nor dry out in use. Extreme condition, long life and zero leakage packing for high temperature, high pressure, applications on valves, expansion joints, ball valve seats and other static seals. VR31 is designed for use in static applications only. Against all acids, alkalis and solvents (except very strong oxidisers), gases, feed water and superheated, or saturated steam. Pressure Rating: 200 Bar (VR3) Pressure Rating: 360 Bar (VR31) Temperature: C (In ATM) Temperature: C (In Air) Rotary Speed: 30 m/s (VR3) Rotary Speed: 1 m/s (VR31) ph Range: 0-14 WXF8830 VR3.1/8X30MTR VR3 1/8" 30 metre WXF8831 VR3.3/16X30MTR VR3 3/16" 30 metre WXF8832 VR3.1/4X8MTR VR3 1/4" 8 metre WXF8833 VR3.5/16X8MTR VR3 5/16" 8 metre WXF8834 VR3.3/8X8MTR VR3 3/8" 8 metre WXF8835 VR3.7/16X8MTR VR3 7/16" 8 metre WXF8836 VR3.1/2X8MTR VR3 1/2" 8 metre WXF8837 VR3.9/16X8MTR VR3 9/16" 8 metre WXF8838 VR3.5/8X8MTR VR3 5/8" 8 metre WXF8839 VR3.3/4X8MTR VR3 3/4" 8 metre WXF8840 VR3.7/8X8MTR VR3 7/8" 8 metre WXF8841 VR3.1.0X8MTR VR3 1.0" 8 metre This packing is made from twisted cotton yarns thoroughly impregnated, during and after braiding, with PTFE dispersion and special inert lubricants. The addition of PTFE dispersion widens the chemical resistance of VC6 compared to standard graphited or plain cotton packings. The special lubricants ease fibre to metal contact and embody very high lubricating properties, tenaciously adhering to metal shafts. Vulcan Type VC6 is a soft, strong, absorbent, cotton packing that prevents shaft wear because the cotton constantly absorbs the liquid being pumped along with any abrasive media. VC6 provides high flexibility with a very low co-efficient of friction and maintains a soft, moist pliable running face to the shaft. The special lubrication of Type VC6 is sea-water and slurry resistant. VC6 can be used for sealing stern glands, pumps and valves against water, sewage, solvents, oils, fats and abrasive solutions. Pressure Rating: 100 Bar Temperature: c Rotary Speed: 12 m/s ph Range: 4-12 WXF8842 VC6.1/8X8MTR VC6 1/8" 8 metre 5.90 WXF8843 VC6.3/16X8MTR VC6 3/16" 8 metre WXF8844 VC6.1/4X8MTR VC6 1/4" 8 metre WXF8845 VC6.5/16X8MTR VC6 5/16" 8 metre WXF8846 VC6.3/8X8MTR VC6 3/8" 8 metre WXF8847 VC6.7/16X8MTR VC6 7/16" 8 metre WXF8848 VC6.1/2X8MTR VC6 1/2" 8 metre WXF8849 VC6.9/16X8MTR VC6 9/16" 8 metre WXF8850 VC6.5/8X8MTR VC6 5/8" 8 metre WXF8851 VC6.3/4X8MTR VC6 3/4" 8 metre WXF8852 VC6.7/8X8MTR VC6 7/8" 8 metre WXF8853 VC6.1.0X8MTR VC6 1.0" 8 metre For Hygienic valves, see our Process section Brammer Sales & Service Centres nationwide Tel:

24 Vulcan Type VT5 Vulcan Type VF4 4 Vulcan Type VT5 is an outstanding PTFE impregnated and lubricated packing, made to replace traditional PTFE Asbestos packings, without sacrificing the strength and natural sealing qualities of Asbestos. Asbestos replacement packings normally have a payoff in terms of capabilities of the fibre used, or in the terms of cost. VT5 is a low cost, quality packing giving outstanding service life. Vulcan VT5 is braided from natural Ramie fibres which are extremely strong and therefore highly resistant to wear and to rotting. A long term PTFE impregnation is bound to each yarn in a special process and the packing is further treated with inert lubricants. VT5 PTFE Ramie fibre packing is especially suitable for aqueous mixtures containing abrasive media such as found in the water, sewage, paper and marine industries. VT5 is non-staining and smooth running to give a high level of shaft protection. This packing is characterised by its long service life with high mechanical strength and excellent volumetric stability. Multi-purpose pump and valve packing for exceptional trouble-free service life against general and abrasive media. For use in the water, marine, brewing, food, chemical, petro-chemical and paper industries. Pressure Rating: 100 Bar Temperature: C Rotary Speed: 12 m/s ph Range: 2-12 WXF8854 VT5.1/8X8MTR VT5 1/8" 8 metre WXF8855 VT5.3/16X8MTR VT5 3/16" 8 metre WXF8856 VT5.1/4X8MTR VT5 1/4" 8 metre WXF8857 VT5.5/16X8MTR VT5 5/16" 8 metre WXF8858 VT5.3/8X8MTR VT5 3/8" 8 metre WXF8859 VT5.7/16X8MTR VT5 7/16" 8 metre WXF8860 VT5.1/2X8MTR VT5 1/2" 8 metre WXF8861 VT5.9/16X8MTR VT5 9/16" 8 metre WXF8862 VT5.5/8X8MTR VT5 5/8" 8 metre WXF8863 VT5.3/4X8MTR VT5 3/4" 8 metre WXF8864 VT5.7/8X8MTR VT5 7/8" 8 metre WXF8865 VT5.1.0X8MTR VT5 1.0" 8 metre VF4 is braided from selected, long fibre, heavy duty, flax yarns thoroughly impregnated yarn by yarn with PTFE and treated with break-in lubricants. The packing is designed to give a very low co-efficient of friction, resistance to wear and rotting, good compressibility, high flexibility, high tensile strength and comparative ease of installation and take-up especially on large cross-sections. Vulcan VF4 PTFE Flax packing is especially designed to seal large cross-sectional areas and is ideal to solve the exacting sealing requirements of stern glands in the marine field. The packing will also be of superior service in heavy reciprocating machinery, rotary applications handling abrasive media and heavy duty static applications such as tank lid seals. For use in paper, marine, chemical, pharmaceutical, sugar and water industries against salt water, slurries, hydrocarbons, oils, greases and solvents. Pressure Rating: 130 Bar Temperature: C Rotary Speed: 10 m/s ph Range: 2-12 WXF8866 VF4.1/8X8MTR VF4 1/8" 8 metre WXF8867 VF4.3/16X8MTR VF4 3/16" 8 metre WXF8868 VF4.1/4X8MTR VF4 1/4" 8 metre WXF8869 VF4.5/16X8MTR VF4 5/16" 8 metre WXF8870 VF4.3/8X8MTR VF4 3/8" 8 metre WXF8871 VF4.7/16X8MTR VF4 7/16" 8 metre WXF8872 VF4.1/2X8MTR VF4 1/2" 8 metre WXF8873 VF4.9/16X8MTR VF4 9/16" 8 metre WXF8874 VF4.5/8X8MTR VF4 5/8" 8 metre WXF8875 VF4.3/4X8MTR VF4 3/4" 8 metre WXF8876 VF4.7/8X8MTR VF4 7/8" 8 metre WXF8877 VF4.1.0X8MTR VF4 1.0" 8 metre For Cooper lters, see our new Filtration section Contact Brammer on

25 4 Vulcan Type VF225 Vulcan Type VGC206 Vulcan Type VF225 is square-braided from long, heavy duty natural fibre yarns. These high-strength yarns are thoroughly impregnated, before and after braiding, with a specially blended lubricant. The packing is designed to give a very low coefficient of friction, resistance to wear and rotting, good compressibility, high flexibility, high tensile strength and ease of installation. VF225 is an excellent, general purpose packing especially for water duties. Its resilience, low shaft wear, ease of fitting and economic cost makes Vulcan VF225 an effective choice for many standard applications. Type VF225 is suitable for all general water-based applications in pumps and valves, up to 120 C. Pressure Rating: 50 Bar Temperature: C Rotary Speed: 8 m/s ph Range: 5-9 WXF8878 VF225.1/8X8MTR VF225 1/8" 8 metre WXF8879 VF225.3/16X8MTR VF225 3/16" 8 metre WXF8880 VF225.1/4X8MTR VF225 1/4" 8 metre WXF8881 VF225.5/16X8MTR VF225 5/16" 8 metre WXF8882 VF225.3/8X8MTR VF225 3/8" 8 metre WXF8883 VF225.7/16X8MTR VF225 7/16" 8 metre WXF8884 VF225.1/2X8MTR VF225 1/2" 8 metre WXF8885 VF225.9/16X8MTR VF225 9/16" 8 metre WXF8886 VF225.5/8X8MTR VF225 5/8" 8 metre WXF8887 VF225.3/4X8MTR VF225 3/4" 8 metre WXF8888 VF225.7/8X8MTR VF225 7/8" 8 metre WXF8889 VF X8MTR VF " 8 metre Vulcan VGC206 is a densely braided, cotton packing impregnated with a blend of mineral lubricants and graphited. Special lubricants are added to the fibres during and after braiding. These preparations produce a thorough lubrication that will not readily migrate, leading to minimal shaft friction and wear and extended packing life. Vulcan VG206 lubricated Graphited Cotton is a quality sample of a traditional water pump packing VGC206 is designed to give low-cost, good packing life in general fluid handling services. Dynamic application handling water, oil and ammonia products. General purpose pump and valve packing for water duties. Pressure Rating: 50 Bar Temperature: C Rotary Speed: 8 m/s ph Range: 4-10 WXF8890 VGC206.1/8X8MTR VGC206 1/8" 8 metre WXF8891 VGC206.3/16X8MTR VGC206 3/16" 8 metre WXF8892 VGC206.1/4X8MTR VGC206 1/4" 8 metre WXF8893 VGC206.5/16X8MTR VGC206 5/16" 8 metre WXF8894 VGC206.3/8X8MTR VGC206 3/8" 8 metre WXF8895 VGC206.7/16X8MTR VGC206 7/16" 8 metre WXF8896 VGC206.1/2X8MTR VGC206 1/2" 8 metre WXF8897 VGC206.9/16X8MTR VGC206 9/16" 8 metre WXF8898 VGC206.5/8X8MTR VGC206 5/8" 8 metre WXF8899 VGC206.3/4X8MTR VGC206 3/4" 8 metre WXF8900 VGC206.7/8X8MTR VGC206 7/8" 8 metre WXF8901 VGC X8MTR VGC " 8 metre For a complete range of Enerpac equipment, see our Hydraulics section For PVC hose, see our Pneumatics section 108 We work harder to save you money and downtime Tel:

26 Flexible Packing Extractors Vulcan Packing Extractors 4 These flexible extractors are designed to facilitate the removal of old packing of any size. The long flexible shank of the extractors makes access easy, even to those glands in the most awkward positions. The hardened and tempered steel screw end is designed to give maximum penetration into the packing. The extractors are supplied in four sizes, as follows: Size No. 1 for 3/16 and 1/4 packing. Size No. 2 for 5/16 and 3/8 packing. Size No. 3 for 7/16 and 1/2, 9/16 and 5/8 packing. Size No. 4 for 3/4 packing and upward. Extractors may be ordered in any quantity of individual size or in boxed sets comprising one each of the four sizes. The pattern C extractors have the corkscrew tip integral with the extractor while the pattern R has a replaceable tip. The preferred type should be specified when ordering. WXF8902 TRACC Set of All 4 Packing Extractors N/A WXF8903 TRACC.1 1 x Size 1 with Integral Tip N/A 7.51 WXF8904 TRACC.2 1 x Size 2 with Integral Tip N/A 7.84 WXF8905 TRACC.3 1 x Size 3 with Integral Tip N/A 9.36 WXF8906 TRACC.4 1 x Size 4 with Integral Tip N/A WXF8907 TRACR Set of 4 Replaceable Tip Extractors N/A WXF8908 TRACR.1 1 x Size 1 with Replaceable Tips N/A WXF8909 TRACR.2 1 x Size 2 with Replaceable Tips N/A WXF8910 TRACR.3 1 x Size 3 with Replaceable Tips N/A WXF8911 TRACR.4 1 x Size 4 with Replaceable Tips N/A Contact Brammer on

27 For all your Sealing Products & Services PACKINGS Compression packing is often the most cost effective way to seal pump shafts and valve stems. Our extensive ranges are constructed from yarns of natural or man-made fibres, with special duty packings made from metal foils and exfoliated graphite. Supagraf Premier and Supagraf Control are our high performance stem sealing packings for valves controlling hazardous media. GASKETS & JOINTINGS James Walker manufactures and supplies complete ranges of metallic and semi-metallic joints, gaskets and sheet jointings, including Metaflex spiral wound gaskets, Moorside API ring joints, and jointings such as Sentinel and Chieftain, plus other eptfe, graphite, aramid, glass and carbon fibre grades. In addition, we produce precision-cut flat gaskets to any shape, size and quantity from any sheet material, including our own extensive ranges of jointings. HYDRAULIC SEALS Our many designs of piston seals, rod seals, packings, wiper rings and bearing strips, suit applications from miniature hydraulic actuators to the largest forging presses. ROTARY LIP SEALS Walkersele rotary shaft lip seals retain lubricant and protect bearings against environments. For ease of installation they can be split and joined on site. Tunnel-boring machine seals are made to unlimited diameter. BELLOWS AND EXPANSION JOINTS Comflex bellows, connectors and expansion joints suit applications from dust excluders for precision equipment made in lightweight PVC, to heavy duty units for turbine exhausts and pulverising mills. Composite materials are also supplied in sheet form for on-site replacement of ductwork joints. MACHINE MOUNTING PADS Tico mounting pads are scientifically designed for plant installation, low frequency isolation or high impact buffers. Adjustamounts provide swift adjustment for accurate levelling of machines. For further details please contact your local Brammer Sales and Service Centre

28 Since 1876, maintenance personnel have been relying on Beldam Burgmann to ensure that their manufacturing & process plants are operating to the maximum capacity. Today, that ethos still applies with Beldam Burgmann offering a range of cost effective quality sealing products when they are required and where they are required. Brammer and Beldam Burgmann has an unrivalled capability to deliver sealing solutions via our technical expertise and by bringing innovative solutions to the market. your seal of success Braided Packing Pilot packing specially designed for valves, rotating & static applications Manufactured to meet exacting specifications in all industries Manufactured using the best natural & synthetic materials Designed & tested for fugitive emissions (FE), water, food, nuclear & many other specialist applications Rubber Sheeting Widest range of high quality British Standard materials in stock Standard polymers such as natural, neoprene & nitrile stocked as well as Viton & silicone EPDM with Water Research Advisory Scheme (WRAS) approval & food quality rubber sheeting in stock Electrical Matting to BS921 & VDE 0303, plus a wide range of matting and flooring products in stock Engineered Polymers Large range of components manufactured from Crossflon PTFE and other polymers such as PEEK, nylon, acetal etc. Standard ranges of bellows, bearings, diaphragms and chevron sets available PTFE valve sealing components Design team to help supply nonstandard components Sheet Jointing Large range of sheet jointings available from stock Materials include: Beldam s Pilot, compressed fibre, virgin & filled PTFE, paper & cork sheet jointing Frenzelit s Novaphit SSTC pure graphite reinforced jointing Gore GR expanded PTFE Flange Gaskets Full range of standard table gaskets, spiral wounds & PTFE envelopes available from stock to meet all your sealing requirements Gaskets in other materials, (tanged graphite, PTFEs, rubber, etc.) cut to order Gaskets in specialist materials and intricate shapes also available Boiler Spares Full range of spares available for boiler repair & maintenance Range of standard sealing products for doors & hatches Specialist range of tadpole seals for difficult to seal doors & hatches Gauge glasses, cones, valve sleeves & other items also available For further details, please contact your nearest Brammer Sales & Service Centre on Gore GR is a W L Gore & Associates registered trademark. Pilot & Crossflon are Beldam Crossley Ltd registered trademarks. Novaphit SSTC is a Frenzelit-Werke GmbH registered trademark. Viton is a Du Pont registered trademark.

29

30

31 Radial shaft seals Knowledge engineering for bearing protection The class leading HMS5 single lip and HMSA10 auxilliary lip ranges are complemented by a host of other profile designs, each offering distinct advantages to suit the application; metal cased, rubber cased, PTFE lips and many more. The SKF WAVE seals combine material and profile technology to create a seal offering very low friction and up to 35% less heat generated. SKF can also provide standard and custom seals for heavy duty and large diameters. l Improved sealing performance l Resistance to dynamic run out l Secure bore retention l Available in both NBR and FKM materials as standard For further information, please SKF (U.K.) Limited Sealing Solutions

32 Machined seals from SKF Customized for your system performance SKF is the global and technology leader in high quality custom engineered sealing solutions, offering a comprehensive range of machined seals for many industries. The innovative production system SKF SEAL JET reduces manufacturing and dispatch time to a minimum. Virtually all kinds of seal for any conceivable application, in any dimension and design, can be produced. SKF has installed within the Brammer NDC a complete machined seal system to enable fast response for all requirements. SKF offers machined sealing solutions for fluid power, fluid handling and power transmission applications across a wide variety of industries, including special large diameter seals. SKF can manufacture on demand in many world class leading materials such as: l NBR rubbers HNBR, low and high temperature, EPDM, Silicone and ECOFLAS l Polyurethane Standard, high and low temperature, low friction and hard grades l PTFE Many grades available l Plastics PEEK, Polyacetal UHMWPE For further information, please SKF (U.K.) Limited Sealing Solutions

33 Sealing solutions from SKF The Knowledge Engineering Company have a crucial impact on system performance. Drawing on more than 100 years of experience across all industries and applications, and thanks to the comprehensive assortment of both standard and custom made products, SKF can supply the right solution from design through production to maintenance. SKF has unparalleled product ranges in both fluid handling and power transmission sealing solutions. The rotary seal range offers proven benefits of performance and life, the machined and moulded hydraulic seal ranges are class leading in materials and profiles. In addition, our revolutionary SKF SPEEDI-SLEEVE shaft repair system provides outstanding benefits, such as reduced maintenance and repair costs. For further information, please SKF (U.K.) Limited Sealing Solutions

34 SKF SPEEDI-SLEEVE The quickest and most economical way to repair seal worn shafts To seal efficiently, radial shaft seals must run against a smooth, round surface. If this surface becomes worn, the seal will no longer be able to fulfil its function of retaining lubricant, whilst excluding contaminants. To rectify, it is necessary to repair the shaft a simple seal replacement would not be sufficient. Using SKF SPEEDI-SLEEVE there is no shaft dismantling or machining involved costly downtime is saved. Once installed, the original seal size can still be used simplifying stock keeping. And no special equipment is required the installation tool is supplied with the sleeve. Available in two versions: SKF SPEEDI-SLEEVE for normal operating conditions and SKF SPEEDI-SLEEVE Gold for heavy-duty applications. Both versions are available for shaft diameters from 12 to 203 mm. For maximum effect it is recommended that an SKF radial shaft seal is used to complete the installation. This will ensure the most effective and long lasting solution. For further information, please SKF (U.K.) Limited Sealing Solutions