BULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS

Transcription

1 BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS

2 2 20 ezurik, Inc.

3 Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged) Section - Lock Screw Flow to Open etail etail 20 Face-to-Face IS IEC Flangeless Construction 1 (25 300mm) Class Face-to-Face NSI B.10 ISO Series 3 EN Series Flexible Metal Seat 3 2 Section - Lock Screw Flow to Open etail Reinforced PTFE Seat Face-to-Face IS IEC Rigid Metal Seat 3

4 Materials of Construction 3 and 317 Stainless Steel Bodies escription 3 Stainless Steel Body (Class 300 only) 317 Stainless Steel Body 4 1 Body 2 Ball 3 Retainer 4 Retainer Screw 5 Retainer Gasket 6 Upper Shaft 7/ Packing Stud/Nut 9 Packing Gland 10 Packing 11 Packing Washer 12 Upper Bearing Lock Screw 14 Gasket (Metal Seated Only) Seat 17 Gasket (Metal Seated Only) 1 Lower Shaft 19 Lower Bearing 20 Thrust Bearing 21 Gasket 22 Cover 23 Screws 24 dapter 25 dapter Seal 27/2 dapter Screws/ Lock Washer (Not Shown) 31 Seal (Rigid Seat Only) 32 Spring (Rigid Seat Only) 33/34 Seal 3 stainless steel, STM 351, Grade CFM 317 stainless steel, STM 351, Grade CGM 317 stainless steel heat treated nickel overlay, STM 351, Grade CGM 317 stainless steel with tungsten carbide overlay, STM 351,Grade CGM 317 stainless steel heat treated nickel overlay, STM 351, Grade CGM 317 stainless steel with tungsten carbide overlay, 351, Grade CGM 317 stainless steel, STM 351, Grade CGM 317 stainless steel, STM 351, Grade CGM 1- stainless steel 1- stainless steel 2205 uplex stainless steel, STM uplex stainless steel, STM PH stainless steel, STM 564, H PH stainless steel, STM 564, H stainless steel 1- stainless steel 317 stainless steel, STM 351, Grade CGM 317 stainless steel, STM 351, Grade CGM PTFE or carbon graphite PTFE or carbon graphite 317 stainless steel, STM stainless steel, STM 276 Reinforced PTFE Fabric 0C stainless steel, STM 276 0C stainless steel, STM 276 Reinforced PTFE Fabric 3 Stainless Steel lloy 20, B473 Reinforced PTFE Flexible 317 stainless steel with heat treated electroless nickel overlay, STM 240 Rigid 317 stainless steel with tungsten carbide overlay, STM 351, Grade CGM or STM 240/276 Rigid 317 stainless steel with heat treated nickel overlay, STM 351, Grade CGM or STM 240/276 0C stainless steel, STM 276 lloy 6, MS 537B, Stellite Reinforced PTFE Flexible 317 stainless steel with heat treated electroless nickel overlay, STM 240 Rigid 317 stainless steel with tungsten carbide overlay, STM 351, Grade CGM or STM 240/276 Rigid 317 stainless steel with heat treated nickel overlay, STM 351, Grade CGM or STM 240/ uplex stainless steel, STM uplex stainless steel, STM PH stainless steel, STM 564, H PH stainless steel, STM 564, H900 0C stainless steel, STM 276 lloy 6, MS 537B, Stellite 0C stainless steel, STM 276 lloy 6, MS 537B, Stellite 317 stainless steel, STM 351, Grade CGM 317 stainless steel, STM 351, Grade CGM 1- stainless steel 1- stainless steel uctile iron, STM 536, Grade Nitrile uctile iron, STM 536, Grade Nitrile 3 stainless steel 3 stainless steel Fluoroelastomer, PF encapsulated Fluoroelastomer, PF encapsulated 17-7 PH stainless steel, STM PH stainless steel, STM 3 Inconel, STM B637 N07750 Flouroelastomer, PF encapsulated Kalrez Kalrez Inconel, STM B637 N07750 Flouroelastomer, PF encapsulated

5 Materials of Construction Hastelloy C & Carbon Steel Bodies escription Hastelloy C Body Carbon Steel Body 1 Body 2 Ball Hastelloy C, STM 494, Grade CW2M Hastelloy C with heat treated electroless nickel overlay STM 494 Grade CW2M Carbon steel, STM 2, Grade WCB 317 stainless steel with tungsten carbide overlay, 351, Grade CGM 317 stainless steel with heat treated nickel overlay, 351, Grade CGM 3 Retainer 4 Retainer Screw 5 Retainer Gasket 6 Upper Shaft 7/ Packing Stud/Nut 9 Packing Gland 10 Packing 11 Packing Washer 12 Upper Bearing Lock Screw 14 Gasket (Metal Seated Only) Seat 17 Gasket (Metal Seated Only) 1 Lower Shaft 19 Lower Bearing 317 stainless steel, STM 351, Grade CGM 317 stainless steel, STM 351, Grade CGM 1- stainless steel 1- stainless steel Hastelloy C, STM B stainless steel 1- stainless steel Hastelloy C, STM 494, Grade CW2M PTFE or carbon graphite Hastelloy C, STM B574/B575 Reinforced PTFE Fabric Hastelloy C, STM B574/B575 lloy 20, B473 Reinforced PTFE Rigid Hastelloy with heat treated electroless nickel overlay,stm 494, Grade CW2M or STM B574/B575 Hastelloy C, STM B574 Hastelloy C, STM B574 or B PH stainless steel, STM 564, H uplex stainless steel, STM stainless steel, STM 351, Grade CGM PTFE or carbon graphite 317 stainless steel, STM 276 Reinforced PTFE Fabric 0C stainless steel, STM 276 lloy 6 MS 537B, Stellite 3 Stainless Steel Reinforced PTFE Flexible 317 stainless steel with heat treated electroless nickel overlay, STM 240 Rigid 317 stainless steel with tungsten carbide overlay, STM 351, Grade CGM or STM 240/276 Rigid 317 stainless steel with heat treated nickel overlay, STM 351, Grade CGM or STM 240/ uplex stainless steel, STM stainless steel, STM 564, H900 0C stainless steel, STM 276 lloy 6, MS 537B, Stellite 20 Thrust Bearing (Only With PTFE Seat) 21 Gasket 22 Cover Hastelloy C, STM 494, Grade CW2M 317 stainless steel, STM 351, Grade CGM 23 Screws 1- stainless steel 1- stainless steel 24 dapter 25 dapter Seal uctile iron, STM 536, Grade Nitrile uctile iron, STM 536, Grade Nitrile 27/2 dapter Screws/ Lock Washer (Not Shown) 31 Seal (Rigid Seat Only) 32 Spring (Rigid Seat Only) 33/34 Seal 1- stainless steel 1- stainless steel Fluoroelastomer, PF encapsulated Fluoroelastomer, PF encapsulated 17-7 PH stainless steel, STM PH stainless steel, STM 3 Inconel, STM B637 N07750 Inconel, STM B637 N stainless steel with PTFE bonded fabric 317 stainless steel with PTFE bonded fabric Flouroelastomer, PF encapsulated Flouroelastomer, PF encapsulated Kalrez Kalrez 5

6 Selection Flow Characteristic Percent of Maximum Flow 100% 90% 0% 70% 60% 50% 40% 30% 20% 10% 0% Shutoff Seat Flexible Metal Reinforced PTFE Rigid Metal 0% 10% 20% 30% 40% 50% 60% 70% 0% 90% 100% Percent Open NSI Class IV VI IV Max. Shutoff Pressure ifferential Flow to Open 275 psi 195 kpa 275 psi 195 kpa 275 psi 195 kpa NSI Body Rating/Face-to-Face Class 0 Flanged 1 20" (25 500mm) Class 0 Flangeless 1 (25 300mm) Class 300 Flanged 1 (25 300mm) pplicable Standards NSI/FCI 70-2 Control valve seat leakage Flanged Class 0 NSI B.10 ISO 5752 PN 10/ EN 55-1 PN 10/ 1 (25 300mm) only Flanged Class 0 IS or IEC : 1 20" (25 500mm) Flanged Class 0 Long Body B.10, ISO 5752 and EN 55-1PN 10/, 1 (25 300mm) except (65mm) Flangeless Class 0 IS or IEC Flanged Class 300 IS 75.04, IEC NSI B.5 Pipe flanges and flanged fittings for Class 0 and 300 NSI B.34 MSS-SP-25 Pressure/temperature ratings for Class 0 and 300 valves Marking requirements Bolting NSI 0 &300, PN 10,, 25 & 40, JIS 10, &20 IS S75.04 NSI B.10 IEC ISO 5752 PN 10/ EN 55-1 PN 10/ Face-to-Face dimensions Face-to-Face dimensions Face-to-Face dimensions Basic Series 3 Face-to-Face dimensions Basic Series 3 Face-to-Face dimensions Lever ctuator Weights Infinite Position Lever lbs./kg mm mm 4.1 Cv/Kv Values 25mm 40mm 50mm 65mm 0mm 100mm 0mm " 200mm 250mm 300mm 1 350mm " 400mm 450mm 20" 500mm Weights 25mm 40mm 50mm 65mm 0mm 100mm 0mm " 200mm 250mm 300mm 1 350mm " 400mm 450mm 20" 500mm Class 0 Flanged lbs./kg Flexible Metal & Rigid Metal Class 0 Flangeless lbs./kg % Open Seat Type Class 300 Flanged lbs./kg Reinforced PTFE dd for NSI (Long Body) Face-to-Face lbs./kg

7 Ordering Information To order, simply complete the valve order code from the information shown. n ordering example is shown for your reference. Style Give valve style code as follows: VPB = V-Port Ball Give valve size code as follows: 1 = (25mm) = " (200mm) 1.5 = (40mm) 10 = (250mm) 2 = (50mm) 12 = (300mm) 2.5 = (65mm) 14 = 1 (350mm) 3 = (0mm) = " (400mm) 4 = (100mm) 1 = (450mm) 6 = (0mm) 20 = 20" (500mm) End Connection Give end connection code as follows: Flangeless W1S = Class 0, NSI/IS and IEC F-F 1- (25-300mm) valves Flanged F1S = Class 0, NSI/IS and IEC F-F 1-20" (25-500mm) valves F2S = Class 300, NSI/IS and IEC F-F 1- (25-300mm) valves F1L = Class 0, NSI B.10, ISO 5752 and EN 55-1 PN 10/ 1- (25-300mm) valves F1 = Class 0, NSI B.10, ISO 5752 and EN 55-1 PN 10/ 1- (25-300mm) excluding (65mm) valve size (Long body) Body Material Give body material code as follows: S3 = 317 stainless steel (Class 0 only) S3 bodies must be ordered with S3NH or S3S ball, S10 shaft and S3, S3S, S3R or RT seat. CS = Carbon Steel CS bodies must be ordered with S3NH or S3S ball, S10 shaft, and S3, S3S, S3R or RT seat. S2 = 3 stainless steel (Class 300 only) S2 bodies must be ordered with S3NH or S3S ball, S10 or S5 shaft, and either S3, S3S, S3R or RT seat. On pplication HC = Hastelloy C HC body must be ordered with HCNH ball, HCC or TNC shaft, HCRI or RT seat, and HC, HCVS or HCKS bearings. Packing Material Give packing material code as follows: TC = PTFE chevron, 500º F (260º C) G2 = Braided carbon graphite, 1000º F (540º C) (vailable with S3 seat and S9 or SL bearings) Trim Combination Give ball, shaft, and seat material codes as follows: Ball Material: S3NH = 317 stainless steel heat treated nickel overlay, to 700 F (370 C) S3S = 317 stainless steel with tungsten carbide overlay, to 1000 F (540 C) (vailable with S3S, S3SI or S3 seat only) On pplication HCNH = Hastelloy C with heat treated electroless nickel overlay, to 700 F (370 C) Shaft Material: S10 = 2205 uplex stainless steel Special S5 = 17-4 PH stainless steel On pplication HCC = Hastelloy C Ceramic Coated (HC Bearings only) TNC = Titanium Ceramic Coated Seat Material: Note: (275 PSI/195 kpa maximum shut off pressure) S3 = Flexible 317 stainless steel heat with heat treated electroless nickel overlay, to 700 F (370 C) S3R = Rigid 317 stainless steel with heat treated nickel overlay, to 450 (230 C). S3S = Rigid 317 stainless steel with tungsten carbide overlay, to 450 F (230 C) (vailable with S3S Ball only) RT = Reinforced PTFE, to 500 F (260 C) On pplication S3RI = Rigid 317 stainless steel with heat treated electroless nickel overlay and Inconel spring, to 450 F (230 C) S3SI = Rigid 317 stainless steel with tungsten carbide overlay and Inconel spring, to 450 F (230 C) HCRI = Rigid Hastelloy C with heat treated electroless nickel overlay and Inconel spring, to 450 F (230 C) Bearing Material: FT = 317 stainless steel with wire reinforced PTFE, to 500 F (260 C) Special S9 = 0C stainless steel bearings, to 1000 F (540 C) S9VS = 0C stainless steel bearings with PTFE/Viton Seal, to 450 F (230 C) SL = Solid Stellite alloy, to 1000 F (540 C) SLVS = Solid Stellite with PF/Viton seal, to 450 F (230 C) SLKS = Solid Stellite with Kalrez seal, to 550 F (2 C) On pplication HC = Hastelloy C 1000º F (540º C) HCVS = Hastelloy C with PF/Viton Seal 450º F (230º C) HCKS = Hastelloy C with Kalrez Seal 550º F (2º C) Options Give option codes as follows: CMC = Certificate of Material Conformance ST3 = Pennsylvania Steel Procurement ct G1 = IN 10 or BS4504/10 rilling (W1S, F1L & F1S only) G2 = IN or BS4504/ rilling (W1S, F1L & F1S only) G3 = IN 25 or BS4504/25 rilling (F2S only) G4 = IN 40 or BS4504/40 rilling (F2S only) J1 = J1S 10 Flange rilling (F1L or F1S only) J6 = J1S Flange rilling (F1L or F1S only) J2 = J1S 20 Flange rilling (F2S only) Ordering Example: VPB,4,F1L,S3,TC,S3NH-S10-RT-FT,G1*PR-R1-PC4 7

8 ctuators Manual ctuators Lever Infinite position levers allow positioning of the ball in any desired position. They can be mounted in 90 increments. n adjustable memory stop is standard on all infinite position levers. It allows the valve to be opened and closed to the same position. Infinite Position Lever Sizing Order Code Shutoff Pressure 1- (25-100mm) LI 25 psi (1965 kpa) Infinite Position Lever Mounting Positions Standard Ordering Example: VPB,3,F1L,S3,TC,3S-S5-S3-FT*LI Manual Gear ctuators Manual gear actuators are available in cast iron construction. They feature sintered bronze bearings on each end of the input shaft for durability and performance. iaphragm ctuators iaphragm actuators may be specified also. They re available with 40, 55, 5, 145 and 250 square inch (0.026m 2, 0.036m 2, 0.055m 2, 0.094m 2, 0.1m 2 ) sizes and with 20, 35 or 60 psi (140, 240 or 410 kpa) spring options. Cylinder ctuators PowerRac Cylinder actuators are available as double-acting or spring return. They feature a high opening torque for on-off applications and also maintain a high operating torque throughout the full stroke for modulating service.

9 imensions P N P N J E E C C Basic IS, IEC NSI, ISO, EN IS IEC NSI ISO EN C E Flanged Class 0 J Flangeless Class 0 Flange Class 300 N P iameter P Square 25mm mm mm mm mm mm mm " 200mm mm mm mm " 400mm mm " 500mm Lever " 400mm " 400mm K imensions R R Inch Millimeter K Note: ll dimensions are subject to change without notice. Request certified drawings for use in preparing piping layouts. 9

10 Tie Bolt & Bolt Lengths Flangeless s Tapped Holes Seat Side B 25mm 40mm 50mm 65mm 0mm 100mm 0mm " 200mm 250mm 300mm F1L NSI, ISO & EN Face-to-Face B F1S, F2S IS & IEC Face-to-Face NSI 0 Quantity of Tapped Holes/Flange PN 10 PN JIS 10 JIS 25mm 40mm 50mm 4 65mm 4 0mm mm 4 4 0mm 4 " 200mm mm 300mm Tie Bolt Length To determine the minimum tie bolt length on flangeless valves: add body length (dimension from chart) add seat retainer length (dimension B from chart) add the two adjoining pipe flange thicknesses (customer determined) add the thicknesses of the two nuts (customer determined) Bolt Length for Tapped Holes Side Opposite Seat To determine the minimum bolt length on flangeless valves for the side opposite the seat: add the tapped lug thickness (dimension from chart) add the adjoining pipe flange thickness (customer determined) Bolt Length for Tapped Holes Seat Side To determine the minimum bolt length on the seat side of flangeless valves: add the tapped lug thickness (dimension from chart) add the seat retainer length (dimension B from chart) add the adjoining pipe flange thickness (customer determined) 10

11 Bolt Length for Tapped Holes Side Opposite Seat To determine the minimum bolt length on the side opposite the seat for those valves with tapped holes: add the valve flange thickness (dimension from chart) add adjoining pipe flange thickness (customer determined) Bolt Length for Tapped Holes Seat Side To determine the minimum bolt length on the seat side for those valves with tapped holes: add the valve flange thickness (dimension from chart) add seat retainer length (dimension B from chart) add adjoining pipe flange thickness (customer determined) Bolt Length Side Opposite Seat To determine the minimum bolt length on the side opposite the seat: add the valve flange thickness (dimension from chart) add the adjoining pipe flange thickness (customer determined) add nut thickness (customer determined) Tapped Holes Seat Side Bolt Length Seat Side To determine the minimum bolt length on the seat side of flanged valves: add the valve flange thickness (dimension from chart) add seat retainer length (dimension B from chart) add adjoining pipe flange thickness (customer determined) add nut thickness (customer determined) B Bolt Lengths - Flanged s NSI 0 Quantity of Tapped Holes/Flange NSI 300 PN 10/ PN 25/40 JIS 10 JIS /20 25mm mm mm mm mm 4 100mm 0mm 4 4 " 200mm mm mm mm " 400mm 450mm 20" 500mm 25mm 40mm 50mm 65mm 0mm 100mm 0mm " 200mm 250mm 300mm B F1L F1S, F2S Flange Thickness NSI, ISO & EN Face-to- Face mm " 400mm 450mm 20" 500mm IS & IEC Face-to- Face Class 0 Class

12 Sales and Service For information about our worldwide locations, approvals, certifications and local representative: Web Site: Riverside ve. N. Sartell, Minnesota Phone: Fax: ezurik, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation. esign features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing by ezurik, Inc. Certified drawings are available upon request. Printed in the U.S..