NC, BK 0.8 V

Transcription

1 QMFZ2 Component - Plastics Friday, July 09, 2004 E90350 KURARAY CO LTD HIGH PERFORMANCE MATERIALS DEV DEPT UMEDA KITA-KU OSAKA JAPAN Material Designation: GT2330 Product Description: Polyamide 9T (PA9T), furnished as pellets. Color Min. Thick. (mm) Flame Class HWI HAI RTI Elec RTI Imp RTI Str IEC GWIT IEC GWFI NC, BK 0.8 V CTI: - HVTR: - D495: - IEC Ball Pressure ( C): - Dielectric Strength (kv/mm): - ISO Tensile Strength (MPa): - ISO Tensile Impact (kj/m 2 ): - Volume Resistivity (10 x ohm-cm): - ISO Flexural Strength (MPa): - ISO Izod Impact (kj/m 2 ): - Dimensional Stability(%): - ISO Heat Deflection ( C): - ISO Charpy Impact (kj/m 2 ): - Report Date: 7/9/2004 Underwriters Laboratories Inc UL94 small-scale test data does not pertain to building materials, furnishings and related contents. UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in components and parts of end-product devices and appliances, where the acceptability of the combination is determined by ULI.

2 Material properties of Genestar Unit Test method Grade G2330 GN2330 GT2330 GN2332 GW2458HF GW2508 PA6T PA46 PPS LCP LCP Type (ASTM) standard Genestar (flame-retardant grade) high weld strength toughness high flow low warpage, high flow low warpage, high strength Other products for reference low warpage Glass fiber content % Physical properties Specific gravity g/cm Water absorption (105F.40C/95%RH/96hrs) % Flammability - UL94 V-0 V-0 (V-0) V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 Mechanical properties Tensile strength MPa D Tensile elongation % D Weld strength MPa D Weld elongation % D Flexural strength MPa D Flexural modulus GPa D Izod impact strength J/m D ( t h d) Bar-flow length mm (610F.320C/0.5mmt/750kgf) (590F) (645F) (645F) Rockwell hardness R scale D Thermal properties Melting point F/C - 583/ / / / / / / / / Glass transition F/C - 257/ / / / / / /85 140/60 194/ DTUL (1.82MPa) F/C D / / / / / / / / / / /280 Electrical properties Dielectric strength MV/m D Volume resistivity Ωcm D Tracking resistance V IEC-CTI > Dielectric constant (1MHz) - D Dielectric loss tangent (1MHz) - D Dimensional characteristics Molding shrinkage :in direction of flow % (1mmt) :at right angles to flow % * Table shows typical values, which are not specified values

3 01 Identification of the substance / preparation and of the company Product:Genestar GT2330 Use:Raw material for plastic industry Company : Ote-Center Building, 1-1-3, Otemachi, Chiyoda-ku,Tokyo, , Japan Phone: (For Information) Fax : Homepage : Emergency Phone : Composition / Information on ingredients Substance CAS Range (%) Additive(Heat stabilizers) ca. 5±2 Flame retardants ca. 17±3 Glass ca. 33±3 1,4-Benzenedicarboxylic acid, polymer with ca. 45±3 2-methyl-1,8-octandiamine and 1,9-nonanediamine 03 Hazards identification No special hazards have to be mentioned 04 First aid mesures General information: Inhalation : Skin contact: Eye contact: Ingestion: Advise to doctor: Remove the victim into fresh air and keep him calm. Do not use mouth-to-mouth or mouth-to-nose resuscitation. Summon a doctor immediately. After contact with molten product cool quickly with cold water. Do not pull solidified product from skin. When it contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Rinse out mouth and give plenty of water to drink. Supply with medical care. Treat symptomatically. 05 Fire-fighting measures Suitable extinguishing media: Extinguishing media that must not be used: Special exposure hazards Arising from the substance or Preparation itself or combustion Products: Special protective equipment for firefighters: Additional information: Water spray jet. Foam. Carbon dioxide. Full water jet. For the care of fire it is to be noted that glass fibers are not oxidizing, not inflammable and noncombustible. Risk of formation of toxic pyrolysis products. In the event of fire the following can be released: Carbon monoxide(co).nitrogen Oxide(NOx). Use self-contained breathing apparatus. Do not inhale explosion and/or combustion gases. Cool contained at risk with water spray jet. Semi-burned residues and ashes may contain free glass fiber-dust. Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations

4 06 Accidental release measures Personal precautions: Environmental precautions: Methods for cleaning up: 07 Handling and storage Advice on safe handling: Advice on protection against fire and explosion: Requirements for storage rooms and vessels: Advice on storage compatibility: Further information on storage conditions: High risk of slipping due to leakage/spillage of product. Use breathing Apparatus if exposed to dust. Avid dust formation. Knock down dust with water spray jet. Do not dispose of contaminated wash water Take up mechanically. Avoid production of dust. Dispose of absorbed Material in accordance with the regulations. Abrasions and dusts may contain free particles of glass fiber. Avoid the Formation and deposition of dust. Provide extraction if dust raised. Use breathing apparatus when transferring large quantities without extraction facilities. Do not clean dust-covered objects and floors while dry but clean thoroughly with plenty of water. Dust can form an explosive mixture with air. Keep only in original container. Do not store together with oxidizing agents. Keep in a cool place. Store in a dry place. 08 Exposure controls / personal protection Additional above on system design: Ensure adequate ventilation on workstation. Ingredients with occupational exposure limits to be monitored: Respiratory protection: Respiratory protection use. Short term:filter apparatus, Filter P2. Hand protection: Eye protection: Skin protection: General protective measures: Hygiene measure: Delimitation and monitoring of The environmental exposition: Butyl rubber Safety glasses Long-sleeved work clothes Do not inhale dust. Avoid contact with eyes. Avoid contact of molten material with skin. Do not eat, drink, smoke or take drugs at work. After worktime and before work breaks the affected skin areas must be thoroughly cleaned. Wash hands before breaks and after work. Use barrier skin Cream.

5 09 Physical and chemical properties Form: Pellets Color: black/natural ph-value: ph-value(1%): Boiling point( ): Flash point( ): Flammability( ): >200 Lower explosion limit: Upper explosion limit: Combustible properties: no Vapor pressure(kpa): Density(g/ml): 1.58 Bulk density(kg/m 3 ): Solubility in water: Partition coefficient:n-octanol/ Water: Viscosity: Relative vapor density determinate in air: Evaporation speed: Melting point( ): ca.306 Autoignition temperature( ): Decomposition temperature( ): 10 Stability and reactivity Hazardous reactions: Hazardous decomposition Products: Reactions with strong oxidizing agents,acids and alkalies. No hazardous decomposition products known. 11 Toxicological information Acute oral toxicity: Mutagenicity: Ames-test, negative Experience made in practice: in case product dust is inhalated possible discomforts are: irritation of Mucous lining(nose,throst,eyes),cough, sneezing, flow of tears. Fiber Abrasion can cause mechanical skin irritation. General remarks: No toxicological data are available. 12 Ecological information Fish toxicity: Daphnia toxicity: Behavior in environment compartments: Behavior in sewage plant: Bacteria toxicity: Biological degradability: COD:

6 13 Disposal considerations Disposal/product: Disposal/Contaminated packaging: 14 Transport information Classification according to ADR: Classification according to IMDG Classification according to IATA 15 Regulatory information Labeling: Dispose of as hazardous waste. Disposal in an incineration plant in accordance with the regulations of the local authorities. Packaging that cannot be cleaned should be disposed of as for product. no dangerous goods not classified as dangerous goods not classified as dangerous goods The product does not require a hazard warning label in accordance with EC directives Special labeling for certain preparations Not applicable 15.2 Sources of documentation EEC:91/155(2001/58);67/548(2004/73,29.ATP);1999/45(2001/60);91/689(2001/118);89/542;1999/13;2004/42 Transport information:adr(2005);imdg-code(32.amdt);iata-dgr(2006) 15.3 National regulations (GB) EH40/2002 Occupational Exposure Limits Supplement Other information (Information on ingredients-position 02) 16.1 Additional information Observe employment restrictions for people: VOC(1999/13/EG): Customs Tariff: 16.2 Information on ingredients 2004/42/EG: UBA-Registration: 648/2004/EG.Contains: no 16.3 Modified position none