Business Opportunity. Title: Ireland-Dublin: Provision of metal fabrication engineering equipment. Document Type: Contract Notice

Transcription

1 Business Opportunity Title: Ireland-Dublin: Provision of metal fabrication engineering equipment Document Type: Contract Notice Published By: Dublin Institute Of Technology Date Published: 17 May 2017 Deadline Date: 26 June 2017 Directive 2014/24/EU - Public Sector Directive Section I: Contracting authority I.1) Name and addresses Dublin Institute of Technology N/A Rathmines House, Lower Rathmi Dublin Contact person: Tom Sheridan Telephone: tom.sheridan@dit.ie NUTS: Internet address(es) Main address: Address of the buyer profile: 1

2 I.3) Communication The procurement documents are available for unrestricted and full direct access, free of charge at: Additional information can be obtained from the abovementioned address Tenders or requests to participate must be sent electronically to: Tenders or requests to participate must be sent to the abovementioned address I.4) Type of the contracting authority Body governed by public law I.5) Main activity Education Section II: Object II.1) Scope of the procurement II.1.1) Title Request for Tenders to Establish single supplier contract(s) for the provision of Metal Fabrication Engineering equipment to DIT Bolton Street. Reference number: NCTR 1735 II.1.2) Main CPV code II.1.3) Type of contract Supplies II.1.4) Short description As an innovator in the development of Engineering Education the School is currently seeking to enhance the range of programmes offered and is seeking to incorporate both knowledge and understanding of sustainable engineering design within its programmes. The Department of Metal Fabrication, Sheetmetal work and Welding is now a discipline within the school structure of Manufacturing Technology with more than 50 years of 2

3 experience in providing Engineering education and training and, in particular to the areas of Metal Fabrication and welding. The Discipline of Manufacturing Technology requires new up to date equipment to facilitate the delivery of the new Metal Fabrication syllabus version 4.1. The previous syllabus was written in 2003 and the existing equipment is not up to the required technical standard required to deliver the new syllabus. Delivery, installation or commissioning of all new equipment will be in DIT Linenhall, Dublin 1. II.1.5) Estimated total value Value excluding VAT: EUR II.1.6) Information about lots This contract is divided into lots: Yes Tenders may be submitted for all lots II.2) Description Lot No: 1 II.2.1) Title Guillotine and Press brake II.2.2) Additional CPV code(s) II.2.3) Place of performance NUTS code: II.2.4) Description of the procurement Per RFT. II.2.5) Award criteria Price is not the only award criterion and all criteria are stated only in the procurement documents II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Duration in months: 9 This contract is subject to renewal: No II.2.9) Information about the limits on the number of candidates to be invited 3

4 II.2.10) Information about variants Variants will be accepted: No II.2.11) Information about options Options: No II.2.13) Information about European Union funds Lot No: 2 The procurement is related to a project and/or programme financed by European Union funds: No II.2.1) Title CNC Plasma Cutter II.2.2) Additional CPV code(s) II.2.3) Place of performance NUTS code: II.2.4) Description of the procurement As per RFT. II.2.5) Award criteria Price is not the only award criterion and all criteria are stated only in the procurement documents II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Duration in months: 9 This contract is subject to renewal: No II.2.9) Information about the limits on the number of candidates to be invited II.2.10) Information about variants Variants will be accepted: No II.2.11) Information about options Options: No 4

5 II.2.13) Information about European Union funds Lot No: 3 The procurement is related to a project and/or programme financed by European Union funds: No II.2.1) Title Waterjet Profile Cutting Machine II.2.2) Additional CPV code(s) II.2.3) Place of performance NUTS code: II.2.4) Description of the procurement As per RFT. II.2.5) Award criteria Price is not the only award criterion and all criteria are stated only in the procurement documents II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Duration in months: 9 This contract is subject to renewal: No II.2.9) Information about the limits on the number of candidates to be invited II.2.10) Information about variants Variants will be accepted: No II.2.11) Information about options Options: No II.2.13) Information about European Union funds Lot No: 4 The procurement is related to a project and/or programme financed by European Union funds: No 5

6 II.2.1) Title Welding Plants II.2.2) Additional CPV code(s) II.2.3) Place of performance NUTS code: II.2.4) Description of the procurement As per RFT. II.2.5) Award criteria Price is not the only award criterion and all criteria are stated only in the procurement documents II.2.7) Duration of the contract, framework agreement or dynamic purchasing system Duration in months: 9 This contract is subject to renewal: No II.2.9) Information about the limits on the number of candidates to be invited II.2.10) Information about variants Variants will be accepted: No II.2.11) Information about options Options: No II.2.13) Information about European Union funds The procurement is related to a project and/or programme financed by European Union funds: No Section III: Legal, economic, financial and technical information III.1) Conditions for participation III.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers List and brief description of conditions: 6

7 As per RFT. III.1.2) Economic and financial standing Selection criteria as stated in the procurement documents III.1.3) Technical and professional ability Selection criteria as stated in the procurement documents III.2) Conditions related to the contract III.2.1) Information about a particular profession III.2.3) Information about staff responsible for the performance of the contract Obligation to indicate the names and professional qualifications of the staff assigned to performing the contract Section IV: Procedure IV.1) Description IV.1.1) Type of procedure Open procedure IV.1.8) Information about Government Procurement Agreement (GPA) The procurement is covered by the Government Procurement Agreement: No IV.2) Administrative information IV.2.2) Time limit for receipt of tenders or requests to participate Date: 26/06/2017 Local time: 12:00 IV.2.4) Languages in which tenders or requests to participate may be submitted EN IV.2.6) Minimum time frame during which the tenderer must maintain the tender Tender must be valid until: 26/06/2018 IV.2.7) Conditions for opening of tenders Date: 26/06/2017 Local time: 12:00 Section VI: Complementary information 7

8 VI.1) Information about recurrence This is a recurrent procurement: No VI.4) Procedures for review VI.4.1) Review body DIT 46 Rathmines Road, Rathmones Dublin 6 tom.sheridan@dit.ie VI.5) Date of dispatch of this notice 12/05/2017 8