MAIN CATALOG SUPPLEMENT METRIC
|
|
- Eugenia Bishop
- 6 years ago
- Views:
Transcription
1 MAIN CATAOG SUPPEMENT METRIC
2 Advanced Treading Solutions MAIN CATAOG SUPPEMENT THREAD MIING TM Solid TMDR Drilling, Tread Milling & Camfering...3 TM Solid HCN or ong Treads (3xDo)...8 VARGUS GENius...11 THREAD TURNING D-ine Deep Rake Inserts...12 MINIPRO Mini 5K & Mini 6.0K Improved Clamping System for Small Bores
3 Tread Milling TM Solid TMDR Drilling, Tread Milling & Camfering TM Solid 3-in-1 Tool for Reduced Cycle Times and Productivity eatures and Benefits TMDR tools drill, tread and camfer all in one tooling operation Pre-drilled oles are no longer required! Drilling and tread milling is done simultaneously, wile camfering is produced at te end of te operation Tis versatile tool also works on components wit pre-drilled oles, suc as: blind oles, troug oles, and even semi-finised oles or sank diameters 8, 10, and 12mm tools are offered wit coolant tru Tread lengts: 2xDo and 2.5xDo (Tread Diameter) All tools are left anded, and are suitable for rigt and left and treads Tread Standards: ISO Metric: rom M3x0.5 up to M23x2.0 American UN: rom No up to 3/8"x16 VTS Grade: A general-purpose, eavy duty tread milling grade TiAlN coated for ig resistance to wear Te TMDR is fully supported by VARGUS GENius, te most advanced Tool Selector and CNC Program Generator in te metal cutting tools industry. 3
4 ISO Metric TMDR 1/4P 60 o D2 D1 D 1/8P Defined by: R262 (DIN 13) Tolerance class: 6H * Coolant available only wen specified Recommended Overang eft Hand Tool TMDR Tread Pitc Ordering Code Dimensions mm Witout coolant No. of lutes 2 x Do (1 2 x Tread Diameter) mm D D2 1 Z Zt 4 mm* D1 mm M TD I0.50ISO M TD I0.70ISO M TD I0.80ISO M6-M TD I1.00ISO Wit coolant M6-M TDC I1.00ISO M8-M TDC I1.25ISO M10-M TDC I1.50ISO M TDC I1.75ISO M16-M TDC I2.00ISO Teet TMDR Tread Pitc Ordering Code Dimensions mm Witout coolant 2.5 x Do (1 2.5 x Tread Diameter) No. of lutes mm D D2 1 Z Zt 4 mm* D1 mm M TD I0.50ISO M TD I0.70ISO M TD I0.80ISO M6-M TD I1.00ISO Wit coolant M6-M TDC I1.00ISO M8-M TDC I1.25ISO Teet 1 st Toot: Partial Profile (Rouging) 2 nd Toot: ull Profile (inis) Two cutting teet: Partial Profile for leading toot followed by ull Profile for finising. Te work direction sould be from te outside inwards (Climb Milling). 1 Pitc TMDR Tools are left anded. or CNC use M04 code. * Please use te VARGUS GENius for Camfer recommendations. 4
5 American UN TMDR 1/4P 60 o D2 D1 D 1/8P Defined by: ANSI B1.1:74 Tolerance class: 2B * Coolant available only wen specified Recommended Overang eft Hand Tool TMDR Tread Pitc Ordering Code Dimensions mm Witout coolant No. of lutes 2 x Do (1 2 x Tread Diameter) TPI D D2 1 Z Zt 4 mm* D1 mm No TD I40UNC No TD I32UNC No TD I32UNC /4" TD I28UN No TD I24UNC /4"x20 20 TD I20UNC Wit coolant 1/4" TDC I28UN /16" TDC I24UN /4"x20 20 TDC I20UNC Teet TMDR Tread Pitc Ordering Code Dimensions mm Witout coolant 2.5 x Do (1 2.5 x Tread Diameter) No. of lutes TPI D D2 1 Z Zt 4 mm* D1 mm No TD I40UNC No TD I32UNC No TD I32UNC /4"x28 28 TD I28UN /4" TD I20UNC Wit coolant 1/4" TDC I28UN /16" TDC I24UN /4"x20 20 TDC I20UNC /8" TDC I16UNC Teet 1 st Toot: Partial Profile (Rouging) 2 nd Toot: ull Profile (inis) Two cutting teet: Partial Profile for leading toot followed by ull Profile for finising. Te work direction sould be from te outside inwards (Climb Milling). 1 Pitc TMDR Tools are left anded. or CNC use M04 code. * Please use te VARGUS GENius for Camfer recommendations. 5
6 TMDR - Operating Cycle TMDR Start point. Position at center of ole Move to elical starting position Drill & tread wit elical interpolation Wen desired tread is complete, move to center, ten exit ole Camfer* Return to start point * Please use te VARGUS GENius for Camfer recommendations. TMDR - Coolant Use for Best Cip Evacuation Most Recommended! Jet Collet wit Coolant Tru Coolant Tru Coolant Coolant 6
7 Recommended Cutting Speeds Vc [m/min] and eed f [mm/toot] Material Group PSteel M Stainless Steel K Cast Iron N Non- errous Metals SHeat Resistant Material H Hardened Material Vargus No. 1 Material Hardness Brinell HB Vc(m/min] TMDR VTS eed [mm/toot] ow Carbon (C= %) Unalloyed Steel Medium Carbon (C= %) Hig Carbon (C= %) Non Hardened ow Alloy Steel 5 (alloying Hardened elements 5%) 6 Hardened Hig Alloy Steel Annealed (alloying 8 elements>5%) Hardened ow Alloy (alloying elements <5%) Cast Steel 10 Hig Alloy (alloying elements >5%) Stainless Steel Non Hardened erritic Hardened Stainless Steel Austenitic Austenitic Super Austenitic Stainless Steel Non Hardened Cast erritic Hardened Stainless Steel Austenitic Cast Austenitic Hardened Malleable erritic (sort cips) Cast Iron Pearlitic (long cips) Grey Cast Iron ow Tensile Strengt Hig Tensile Strengt Nodular Sg Iron erritic Pearlitic Aluminum Non Aging Alloys 35 Wrougt Aged Cast Aluminum Alloys 37 Cast & Aged Aluminum Alloys Cast Si 13-22% Copper and Brass Copper Alloys Bronze And Non eaded Copper Annealed (iron based) Hig Temperature Aged (iron based) Alloys Annealed (nickel or cobalt based) Aged (nickel or cobalt based) Titanium Alloys Pure 99.5 Ti 400Rm α+β Alloys 1050Rm HRc - - Extra Hard Steel Hardened & Tempered HRc - - TMDR 7
8 Tread Milling TM Solid HCN or ong Treads Up to 3xDo (Tread Diameter) Helical flutes wit coolant tru for extra deep treading applications eatures and Benefits Maximum tread lengt: 3xDo (Tread Diameter) Relief neck for reduced cutting forces Multi-toot geometry Reduced macining times for long treads VTH Grade: A general-purpose, eavy duty tread milling grade TiCN coated for ig resistance to wear Te HCN is fully supported by VARGUS GENius, te most advanced Tool Selector and CNC Program Generator in te metal cutting tools industry. 8
9 ISO Metric MilliPro HCN 1/4P 60 o e 1 D2 D2 1 D 1/8P Defined by: R262 (DIN 13) Tolerance class: 6H e = Pitc x 3 D 3 lutes Recommended Overang Helical lutes wit Relief Neck and Tru-Hole Coolant Tread Pitc Ordering Code Dimensions mm No. of lutes Teet Bore Dia. Coarse ine mm / D D2 e 1 Z Zt mm M3x0.5 M3.5-M16x HCN I0.50ISOTM M4x HCN I0.70ISOTM M5x HCN I0.80ISOTM M6x1.0 M8-M40x HCN I1.00ISOTM M8-M40x HCN I1.00ISOTM M10-M40x HCN I1.00ISOTM M8x HCN I1.25ISOTM M10x1.5 M12-M48x HCN I1.50ISOTM M12-M48x HCN I1.50ISOTM M14-M48x HCN I1.50ISOTM M16-M48x HCN I1.50ISOTM M12x HCN I1.75ISOTM M14x2.0 M17-M80x HCN I2.00ISOTM M16x2.0 M17-M80x HCN I2.00ISOTM
10 Recommended Cutting Speeds Vc [m/min] and eed f [mm/toot] Material Group PSteel M Stainless Steel K Cast Iron N Non- errous Metals SHeat Resistant Material H Hardened Material Vargus No. 1 Material Hardness Brinell HB Vc(m/min] HCN VTH eed [mm/toot] ow Carbon (C= %) Unalloyed Steel Medium Carbon (C= %) Hig Carbon (C= %) Non Hardened ow Alloy Steel 5 (alloying Hardened elements 5%) 6 Hardened Hig Alloy Steel Annealed (alloying 8 elements>5%) Hardened ow Alloy (alloying elements <5%) Cast Steel 10 Hig Alloy (alloying elements >5%) Stainless Steel Non Hardened erritic Hardened Stainless Steel Austenitic Austenitic Super Austenitic Stainless Steel Non Hardened Cast erritic Hardened Stainless Steel Austenitic Cast Austenitic Hardened Malleable erritic (sort cips) Cast Iron Pearlitic (long cips) Grey Cast Iron ow Tensile Strengt Hig Tensile Strengt Nodular Sg Iron erritic Pearlitic Aluminum Non Aging Alloys 35 Wrougt Aged Cast Aluminum Alloys 37 Cast & Aged Aluminum Alloys Cast Si 13-22% Copper and Brass Copper Alloys Bronze And Non eaded Copper Annealed (iron based) Hig Temperature Aged (iron based) Alloys Annealed (nickel or cobalt based) Aged (nickel or cobalt based) Titanium Alloys Pure 99.5 Ti 400Rm α+β Alloys 1050Rm HRc - - Extra Hard Steel Hardened & Tempered HRc - - HCN 10
11 VARGUS Ius Tool Selector and CNC Program Generator A NEW GENius on Hand 24/7 Introducing te VARGUS GENius App VARGUS APP 33Available for ios & Android 33New responsive design! 33Use on any device! Te most popular and advanced tread turning and tread milling software also available in tese tree versions: VARGUS ONINE Revamped responsive design now compatible for all devices (computers, tablets & smartpones) Online interactive software Always on, always updated! VARGUS DESKTOP Stand-alone software application MS Windows OS-based program Automatic updates VARGUS SETUP Stand-alone software package for USB memory devices MS Windows operating system-based program Just open ZIP & click VargusGen.application VARGUS GENius DESKTOP and SETUP versions can be used wen internet access is not available. All 4 VARGUS GENius versions (APP, ONINE, DESKTOP & SETUP) are available at 11
12 Tread Turning D-ine Deep Rake Inserts eatures and Benefits Specialized solutions for te fittings industry Designed for internal treading for better cip flow ower cutting forces for improved tool life Specially designed for mass production Suitable wit Standard VARDEX tread turning internal olders Te D-ine is available in VKX grade Te D-ine is fully supported by VARGUS GENius, te most advanced Tool Selector and CNC Program Generator in te metal cutting tools industry. 12
13 Y D-ine X IC ISO Metric 1/4P 60 1/8P Defined by: R262 (DIN 13) Tolerance class: 6H Insert Size Pitc Ordering Code Dimensions mm Anvil IC mm mm min X Y RH Toololder 1.0 2DIR1.0ISO /4" DIR1.25ISO DIR1.5ISO NVR DIR2.0ISO DIR1.0ISO DIR1.5ISO /8" DIR1.75ISO DIR2.0ISO YI3 AVR DIR2.5ISO DIR3.0ISO /2" DIR3.5ISO DIR4.0ISO YI4 AVR..-4 American UN 1/4P 60 1/8P Defined by: ANSI B1.1:74 Tolerance class: 2B Insert Size Pitc Ordering Code Dimensions mm Anvil IC mm TPI min X Y RH Toololder 24 2DIR24UN /4" DIR20UN NVR DIR18UN DIR20UN DIR16UN /8" DIR14UN YI3 AVR DIR12UN DIR8UN
14 Y X D-ine IC Witwort R 0.137P 55 R 0.137P Defined by: B.S.84:1956, DIN 259, ISO228/1:1982 Tolerance class: Medium class A Insert Size Pitc Ordering Code Dimensions mm Anvil IC mm TPI min X Y RH Toololder 1/4" DIR19W NVR..-2 3/8" DIR19W DIR14W DIR11W YI3 AVR..-3 BSPT R0.137P ' R0.137P Defined by: B.S. 21:1985 Tolerance class: Standard BSPT Insert Size Pitc Ordering Code Dimensions mm Anvil IC mm TPI min X Y RH Toololder 1/4" 11 3/8" DIR19BSPT DIR14BSPT DIR19BSPT DIR14BSPT DIR11BSPT NVR..-2 YI3 AVR..-3 NPT T Defined by: USAS B2.1:1968 Tolerance class: Standard NPT Insert Size Pitc Ordering Code Dimensions mm Anvil IC mm TPI min X Y Toololder 1/4" 11 3/8" DIR18NPT DIR14NPT DIR18NPT DIR14NPT DIR11.5NPT NVR..-2 YI3 AVR
15 Tread Turning NEW Mini 5K & Mini 6.0K Upgraded Mini 5 and Mini 6.0 ines eatures and Benefits Improved clamping system Standard toololders wit coolant for better cip evacuation eft and tools available as standard New Insert Grades: VKX - TiN coated, general purpose grade. Recommended for steel. VTX - TiAIN coated, general purpose grade. Recommended for stainless steel.* * H inserts available in VKX grade only. Te MINIPRO is fully supported by VARGUS GENius, te most advanced Tool Selector and CNC Program Generator in te metal cutting tools industry. 15
16 Improved Clamping System: Mini 5 - Current Clamping Mini 5K - NEW Clamping >> Mini Current Clamping >> Mini 6.0K - NEW Clamping IC6.0 Blank Cutting Data: Te same cutting data is recommended for bot current and new Mini 5K & 6.0K tools. See page 207 in te VARDEX Main Catalog for more details. Correct Insert & Toololder Use: New toololders are suitable wit new inserts only Old toololders are suitable wit old and new inserts (not optimal) Old Insert New Insert New Toololder Old Toololder 5K & 6.0K aser Marking: Inserts ave an additional K laser mark: 16
17 IC IC 5.0 r Y Standard 6.0 Mini-3 Y r Mini-5 Partial Profile 60 Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm mm mm TPI RH H r Y mm Toololder KIRA KIA NVR K(H) KIRA KIA NVR 10.-5K(H) Partial Profile 55 Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm mm mm TPI RH H r Y mm Toololder KIRA KIA NVR K(H) KIRA KIA NVR 10.-5K(H) ISO Metric 1/4P 60 1/8P Defined by: R262 (DIN 13) Tolerance class: 6H Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm mm RH H min Y mm Toololder KIR0.5ISO KI0.5ISO KIR0.75ISO KI0.75ISO KIR1.0ISO KI1.0ISO KIR1.25ISO KI1.25ISO NVR K(H) KIR1.5ISO KI1.5ISO KIR1.75ISO KI1.75ISO KIR2.0ISO KI2.0ISO KIR0.35ISO... 5KI0.35ISO KIR0.5ISO... 5KI0.5ISO KIR0.75ISO... 5KI0.75ISO KIR1.0ISO... 5KI1.0ISO KIR1.25ISO... 5KI1.25ISO NVR10.-5K(H) 1.5 5KIR1.5ISO... 5KI1.5ISO KIR1.75ISO... 5KI1.75ISO KIR2.0ISO... 5KI2.0ISO
18 IC IC 5.0 Y Standard 6.0 Mini-3 Y Mini-5 American UN - UNC, UN, UNE, UNS 1/4P 60 1/8P Defined by: ANSI B1.1:74 Tolerance class: 2B Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR40UN KI40UN KIR32UN KI32UN KIR28UN KI28UN KIR24UN KI24UN KIR20UN KI20UN KIR18UN KI18UN KIR16UN KI16UN KIR14UN KI14UN KIR40UN... 5KI40UN KIR32UN... 5KI32UN KIR28UN... 5KI28UN KIR24UN... 5KI24UN KIR20UN... 5KI20UN KIR18UN... 5KI18UN KIR16UN... 5KI16UN KIR14UN... 5KI14UN NVR K(H).NVR10.-5K American UNC - Coarse Pitc 1/4P 60 1/8P Defined by: ANSI B1.1:74 Tolerance class: 2B Tread Insert Size Ordering Code Dimensions mm Min. Bore Dia. IC mm RH H min X Y mm Toololder 1/2" x 13UN 6.0KIR13UN158/ BNVR10S-6.0K /2" x 13UN 6.0KI13UN158/ BNVR10S-6.0KH Witwort - BSW, BSP, BS, BSB R 0.137P 55 R 0.137P Defined by: B.S.84:1956, DIN 259, ISO228/1:1982 Tolerance class: Medium class A Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR28W KI28W KIR19W KI19W KIR14W KI14W KIR28W... 5KI28W KIR19W... 5KI19W KIR14W... 5KI14W NVR K(H).NVR K(H) 18
19 IC IC 5.0 Y Standard 6.0 Mini-3 Y Mini-5 BSPT R0.137P ' R0.137P Defined by: B.S. 21:1985 Tolerance class: Standard BSPT Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR28BSPT KI28BSPT KIR19BSPT KI19BSPT NVR K(H) KIR14BSPT KI14BSPT KIR28BSPT... 5KI28BSPT KIR19BSPT... 5KI19BSPT NVR K(H) 14 5KIR14BSPT... 5KI14BSPT NPT Defined by: USAS B2.1:1968 Tolerance class: Standard NPT NPT Defined by: ANSI B Tolerance class: Class 2 Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR27NPT KI27NPT KIR18NPT KI18NPT NVR K(H) KIR14NPT KI14NPT KIR27NPT... 5KI27NPT KIR18NPT... 5KI18NPT NVR K(H) 14 5KIR14NPT... 5KI14NPT Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR27NPT KI27NPT KIR18NPT KI18NPT NVR K(H) KIR14NPT KI14NPT KIR27NPT... 5KI27NPT KIR18NPT... 5KI18NPT NVR K(H) 14 5KIR14NPT... 5KI14NPT
20 Y 0 IC IC 5.0 Y Standard 6.0 Y 30 IC IC 5.0 IC Y U Style 6.0 Y Mini-5 Trapez 30 Defined by: DIN 103 Tolerance class: 7e/7H Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm mm RH H min Y mm Toololder KIR1.5TR... 5KI1.5TR NVR K(H) KIR2.0TR... 5KI2.0TR KI1.5TR... 5KI1.5TR NVR K(H) 2.0 5KI2.0TR... 5KI2.0TR American ACME Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR12ACME KI12ACME NVR K(H) KIR12ACME... 5KI12ACME NVR K(H) American ACME - Coarse Pitc (U Style) 29 Defined by: ANSI B1.5:1988 Tolerance class: 3G Defined by: ANSI B1.5:1988 Tolerance class: 3G Insert Size Pitc Ordering Code Dimensions mm Bore Min. Dia. IC mm TPI RH H min X Y mm Toololder 6.0U 10 1/2 x10 6.0KUIR10ACME158/ NVRC8-6.0KU-156/ U 10 1/2 x10 6.0KUIR10ACME158/ NVRC8-6.0KUH-156/037 Stub ACME 29 Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR12STACME KI12STACME NVR K(H) KIR12STACME... 5KI12STACME NVR K(H) Defined by: ANSI B1.8:1988 Tolerance class: 2G 20
21 IC IC 5.0 Y Standard 6.0 Mini-3 Y Mini-5 UNJ 5/16P 60 R max p R min P Defined by: MI-S-8879C Tolerance class: 3A/3B Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder KIR20UNJ KI20UNJ NVR K(H) 32 5KIR32UNJ... 5KI32UNJ KIR28UNJ... 5KI28UNJ KIR24UNJ... 5KI24UNJ KIR20UNJ... 5KI20UNJ NVR10.-5K(H) 18 5KIR18UNJ... 5KI18UNJ KIR16UNJ... 5KI16UNJ KIR14UNJ... 5KI14UNJ MJ 5/16P 60 1/8P Defined by: ISO 5855 Tolerance class: 4/6-4H/5H Insert Size Pitc Ordering Code Dimensions mm Min. Bore Dia. IC mm RH H min Y mm Toololder KIR1.0MJ... 5KI1.0MJ KIR1.25MJ... 5KI1.25MJ KIR1.50MJ... 5KI1.50MJ NVR K(H) Pg R0.107P 80 R0.107P Defined by: DIN Tolerance class: Standard Insert Size Pitc Tread Ordering Code Dimensions mm Min. Bore Dia. IC mm TPI RH H min Y mm Toololder Pg7 6.0KIR20PG KI20PG Pg9/11/13.5/16 6.0KIR18PG KI18PG NVR K(H) Pg7 5KIR20PG... 5KI20PG Pg9/11/13.5/16 5KIR18PG... 5KI18PG NVR K(H) 21
22 Toololders Standard U Style Steel Sank / Carbide Implanted Steel Sank / Carbide Implanted 1 D1 1 D1 1 D1 D1 1 D A D D D A A A Mini-3 Standard Spare Parts Insert Size Ordering Code Dimensions mm Anti-Vibration System IC RH/H A 1 D D1 Insert Screw Torx Key 6.0 SNVRC12U-6.0K No BNVRC10S-6.0K Carbide Implanted BNVRC10M-6.0K Carbide Implanted BNVRC10-6.0K Carbide Implanted SN6MTN (M2.0x0.4x4.7) KIP6 Mini-3 U Style Spare Parts Insert Size Ordering Code Dimensions mm to Insert Holder Helix IC RH H A 1 (max) D D1 mm Deg. Insert Screw Torx Key 6.0U NVRC8-6.0KU-156/003 NVRC8-6.0KUH-156/ SN6MTN (M2.0x0.4x4.7) KIP6 Toololders D1 D A 1 Mini-3 Adjustable Spare Parts Insert Size Ordering Code Dimensions mm IC Sleeve Holder RH/H A 1 D D1 Insert Screw 6.0 SVC BNVRC8.0T-6.0K SN6MTN (M2.0x0.4x4.7) Torx Key for Insert Screw Holder Screw x3 Key for Holder Screw KIP6 S4.0 K2.0 Te above toololders ave 2.5 elix angle. Te above toololders are for RH inserts. or H inserts, add H to te toololder s ordering code (Example: BNVRC10M-6.0KH). 22
23 Toololders Steel Sank / Carbide Implanted D1 D A 1 Mini- Spare Parts Insert Size Ordering Code Dimensions mm Anti-Vibration System IC RH/H A 1 D D1 Insert Screw Torx Key 5.0 SNVRC10U-5K No BNVRC10S-5K Carbide Implanted BNVRC10M-5K Carbide Implanted BNVRC10-5K Carbide Implanted SN5STR (M2.2x0.45x4.5) K7MT Toololders D1 D A 1 Mini--Adjustable Spare Parts Insert Size Ordering Code Dimensions mm IC Sleeve Holder RH/H A 1 D D1 Insert Screw 5.0 SVC BNVRK6.2T-5K SN5STR (M2.2x0.45x4.5) Torx Key for Insert Screw Holder Screw x 3 Key for Holder Screw K7MT S4.0 K2.0 Te above toololders ave 2.5 elix angle. Te above toololders are for RH inserts. or H inserts, add H to te toololder s ordering code (Example: BNVRC10M-5KH). 23
24 VARGUS Ius Tool Selector and CNC Program Generator A NEW GENius on Hand 24/7 Introducing te VARGUS GENius App VARGUS APP Available for ios & Android New responsive design! 33Use on any device! Te most popular and advanced tread turning and tread milling software on te market today available in 4 versions at APP VARGUS td. mrktg@vargus.com METRIC EE 09/2017 EDITION 01
Mini-3 IC 5.0. Indexable Threading Inserts for Small Bores METRIC
Mini-3 5.0 Indexable Threading Inserts for Small Bores METR A d v a n c e d T h r e a d i n g S o l u t i o n s Mini-3 5.0 INSERTS Partial Profile 60º _ Page 3 Partial Profile 55º _ Page 3 ISO Metric Page
More informationMini-3 IC 5.0. Indexable Threading Inserts for Small Bores METRIC
Mini-3 5.0 Indexable Threading Inserts for Small Bores METR Mini-3 5.0 INSERTS Partial Profile 60º Page 3 Partial Profile 55º Page 3 ISO Metric _ Page 4 American UN Page 5 Whitworth Page 6 BSPT Page 6
More informationFor Extra Large Pitches INCH
or Extra arge Pitches INCH or Extra arge Pitches Up to 1 tpi or 25mm Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited to
More information6 Cutting Corner Inserts METRIC
Cutting Corner Inserts METRIC A Revolutionary Cutting Corner System 1 5 Below 5 1 Below 2 2 Double sided insert eatures: Cutting corners its standard holders Economical insert for lower tooling costs Same
More informationSuper Fast Thread Milling System
Super Fast Thread Milling System METRIC New Family of Thread Milling Tools The VARDEX Multi-flute Indexable Thread Milling (MiTM) system for fast machining, reduces cycle times when machining threads with
More informationSuper Fast Thread Milling System
Super Fast Thread Milling System METRIC New Family of Thread Milling Tools The VARDEX Multi-flute Indexable Thread Mill (MiTM), reduces cycle time on machining of threads with long inserts in a variety
More informationSuper Fast Thread Milling System
Super Fast Thread Milling System INCH New Family of Thread Milling Tools The VARDEX Multi-flute Indexable Thread Mill (MiTM), reduces cycle time on machining of threads with long inserts in a variety of
More informationTMSD. Thread Mill for Deep Holes INCH
TMSD Thread Mill for Deep Holes INCH 2012 1 TMSD Thread Mill for Deep Holes A multiflute, highproductivity, and economical solution for milling threads in deep holes Weldon Shank Carbide Cylindrical Shank
More informationFor Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing METR Advanced Technologies for Gear, Spline and Rack Manufacturing See it in action The VARDEX Gear Milling Concept Advanced milling tools with multi-flute indexable
More informationmicroscope Micro Tools For Small Bores METRIC Advanced Threading Solutions
microscope Micro Tools or Small Bores METIC Avance Threaing Solutions microscope New amily of Micro Single Ene Tools The Microscope line by Varex offers new an improve solutions for Micro threaing, boring
More informationFor Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing METR Advanced Technologies for Gear, Spline and Rack Manufacturing See it in action The VARDEX Gear Milling Concept Advanced milling tools with multi-flute indexable
More informationFor Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing See it in action The VARDEX Gear Milling Concept Advanced milling tools with multi-flute indexable
More informationBORING INSERTS. Thread Turning Index. Back to Main Index. VARDEX Ordering Code System...Page 173 TD0W Inserts...Page 174
Boring > Inserts BOING INSETS Thread Turning Index Back to ain Index VADEX Ordering Code System...Page 173 CD0W Inserts...Page 174 TD0W Inserts...Page 174 WC0W Inserts...Page 175 Boring - icro...page 176
More informationFerritic/martensitic cast steel. Stainless steel Austenitic
Machining Data for Threading ISO Material Condition Tensile Strength [N/mm ] Hardness HB Material < 0. %C Annealed 0 1 1 No. Non-alloy steel and cast steel, free cutting steel >= 0. %C Annealed 0 190
More informationThread Turning Technical Section
Thread Turning Technical Section Contents: Page: Contents: Page: Carbide Grade Selection Type B inserts Recommended Cutting Speed Conversion of Cutting Speed to Rotational Speed Number of Threading Passes
More informationVG-Cut. Complete Range of Turning Solutions METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete ange of Turning Solutions METIC Innovative Grooving & Turning Solutions VG-Cut Complete ange of Turning Solutions Deep Grooving, Threading, Parting Off, Boring and Face Grooving Technical
More informationдля размещения заказа - VG-Cut Deep Grooving, Threading and Parting Off METRIC
Deep Grooving, Threading and Parting Off METIC Deep Grooving, Threading and Parting Off Complete ange of Solutions for External Turning Applications VAGUS Ltd., the leading supplier of premium thread turning
More informationTOOLMAKER SOLUTIONS Custom-Made Inserts Blanks
Non-ISO carbide insert blanks for threading, parting, grooving, drilling, reaming and milling applications TOOLMAKER SOLUTIONS Custom-Made Inserts Blanks HYPERION CUSTOM-MADE INSERT BLANKS Hyperion manufacturers
More informationSmall but Powerful Positive Insert with Dovetail Design
1/9 Small but Powerful Positive Insert with ovetail esign 2/9 Small but Powerful Positive Insert with ovetail esign TaeguTec is proud to introduce a brand new product line to its popular CHASEMI family.
More informationHT 800 WP. The interchangeable insert drilling system GÜHRING - YOUR WORLD-WIDE PARTNER
PRICELIST 42/2013 For extreme process reliability From ole diameter 11 to 40.0 For drilling depts 1.5xD, 3xD, 5xD, 7xD and 10xD Wit intercangeable inserts for steel, stainless steel, cast iron and Al Holders/intercangeable
More informationTapping products B59
Tapping Products B59 B60 Notes Hand Taps Taper, Plug and Bottoming Style - for Multi Purpose A3/A5/A7 Ansi EDP No. Bright Finish Bright Finish Bright Finish Thread per Inch No. of Taper Plug Bottoming
More informationVG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INCH METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving
More informationSolid Carbide Taps.
Solid Carbide Taps www.vergnano.com VERGNANO CARBIDE TAPS The use of carbide tools has increased significantly in the last few years. Nowadays turning, drilling and milling operations are done, for the
More informationThread Turning Technical Data. Threading. Technical Data
Thread Turning THRAED TURNING TECHNICAL DATA Contents Thread Terminology achining a ulti-start Thread Insert Profile Styles Thread Turning ethods Thread Infeed ethods Calculating the Helix Angle and Choosing
More informationThread Turning Technical Section
Thread Turning Technical Section Contents: Page: Contents: Page: Carbide Grade Selection Type B inserts Recommended Cutting Speed Conversion of Cutting Speed to Rotational Speed Number of Threading Passes
More informationPrice/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291.
2 Flute For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.
More informationThreading Tools. Cutting, milling and forming custom-made. Chip by Chip to the Top
Threading Tools Cutting, milling and forming custom-made Chip by Chip to the Top Our Threading Tool Range Threading tools are together with drills, reamers and milling cutters the most important types
More information2. Mill-Thread 2.1 CMT - Vertical Mill-Thread 2.2 CMT - Cutting Data
escription Page 1. hread urning 1.1 SI - ouble Sided hread urning s and oolholders. Mill-hread.1 CM - Vertical Mill-hread. CM - Cutting ata. Mill-hread Solid Carbide.1 M - *rill, hread, Chamfer. M - Cutting
More informationNew Large Diameter Drilling Solution with a Quick Change Tip and Indexable Inserts
Diameters (All with Inch Shanks) Inch: 1.032" - 1.781" (every 1/32") Metric: 26.0mm - 45.0mm (every 1mm) Bodies Inch Weldon Shanks Metric Shanks Available Upon Request Length/Diameter Ratio 5xD Tip Geometry
More informationLaydown Grooving For Shallow Grooves METRIC
aydown Grooving For Shallow Grooves METIC 2011-2012 aydown Grooving Ordering Code Sysem Inser 5 1 2 I 3 4 1.1 5-6 D472 7-6 1.3 8 VKP 9 1- Inser Size 5.0 - IC5.0 2 - IC1/4 3 - IC 4 - IC1/2 5 - IC5/8 I C
More informationCatalog Contents. Solid Carbide Thread Mills: Tool Holders and Inserts: Contents. UN Internal Threads. UN External Threads, UNJ External Threads
Catalog Contents Solid Carbide Thread Mills: Carbide Grades Metric 7 Mini Thread Mills HSN Coated Metric Helical Thread Mills Metric 9 UN Internal Threads UN External Threads, UNJ External Threads 7 Helical
More informationCutting Speed Vc [M/min] Hardness
HPD METRIC Non-alloyed steels, 1213, 13L13, 12, Cast steels Free-machining steels 12L14,1118 etc Low-alloyed steels, Cast steels(
More informationCountersinks. Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute
Countersinks Countersinks Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute smooth cutting perfect chamfering countersinks Product Code: C108 This new generation
More informationApplication Products. High Performance Taps Thread Mills Carbide & PM End Mills
2018 Application Products High Performance Taps Thread Mills Carbide & PM End Mills We have made it our mission to invest in the resources, technology, and people that enable us to provide these qualilty
More informationTHREAD SMART THREAD MILLING SOLUTIONS
THREAD SMART THREAD MILLING SOLUTIONS EVEN IN DIFFICULT TO MACHINE MATERIALS Thread milling is a versatile and cost-effective tooling solution, especially if you re machining a variety of parts, threads
More informationNew XEVT Line for Excellence in Aluminum Machining
1/14 New XEVT ine for Excellence in Aluminum Machining 2/14 To ensure excellence in aluminum machining across all industries, TaeguTec s CHASEAU line now comes in two new offerings: the XEVT 16 which is
More informationTOOLMAKER SOLUTIONS Rotary Tool Blanks
TOOLMAKER SOLUTIONS Rotary Tool Blanks Cemented carbide blanks for drills and end mills TABLE OF CONTENTS HYPERION ROTARY TOOL BLANKS SOLID BLANKS 04 06 END MILL BLANKS WITH CHAMFER, GROUND TO HYPERION
More information2016 New Revision HIGH PERFORMANCE TAPS
2016 New Revision HIGH PERFORMANCE TAPS Greenfield Industries is excited to announce the addition of high performance taps to the Cleveland brand. All taps in the Cleveland line are designed to machine
More informationNow Available, New YNMG 2.53 Inserts. Insert Shapes YNMG Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Carbide: TT8115 (CVD) TT5080 (PVD)
Insert Sapes YNMG 2.53 Corner Radii.016",.031" Grades Cermet: PV3010 CT3000 Caride: TT8115 (CVD) TT5080 (PVD) Now Availale, New YNMG 2.53 Inserts Ingersoll is pleased to announce te expansion of te Gold-Rino
More informationo Micro Tools for Small Bores METRIC
o Micro Tools for Smll Bores METRIC o Micro Tools for Smll Bores The Microscope line offers new nd improved solutions for micro oring, grooving, chmfering nd threding in ores s smll s 1.0 mm. The Microscope
More informationExcellent stability und. ARNO SHORT-Cut -SIS. w w w. a r n o. d e. Introducing SHORT-Cut -SIS for internal groove turning. The new SHORT-Cut holder
Introducing SHORT-Cut -SIS for internal groove turning New w w w. a r n o. d e The new SHORT-Cut holder with optimum insert clamping. Easy handling and efficient in production. ARNO SHORT-Cut -SIS Excellent
More informationCarbide Tip Coolant Fed Drills
KOOLTWIST, KOOLCARB, KOOLDEX Carbide Tip Coolant Fed Drills KOOLTWIST HIGH PERFORMANCE High performance, helical point, stub length. For alloy steels, tool steels, free machining stainless steels, Style
More informationA New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
More informationCATALOG. Featuring BEST VALUE IN THE WORLD OF CUTTING TOOLS
2010 2011 CATALOG Featuring NEW PRUCTS! BEST VALUE IN THE WORLD OF CUTTING TOOLS CONTENTS Inserted Drills 3 9 i - Dream drills 3 5 i - Dream Drill Carbide Inserts and Holders 6 9 i - Dream Drill Data and
More informationSUMMARY TECHNICAL INSTRUCTIONS. Technical Information. Geometries and feed rates. Cutting data. Carbide grades for grooving and parting off
SUMMARY TECHNICAL INSTRUCTIONS Technical Information Grooving / Side turning Face grooving Profiling Threading Parting off Page 2-5 6 7 8-9 10-11 Geometries and feed rates Cutting data Inserts type 217
More informationHR 500. USA Edition HR 500 Solid carbide high-performance reamers up to Ø 20 mm for universal application
Solid carbide high-performance reamers up to Ø 20 mm for universal application T Solid carbide reamer head for Ø 16-38 mm NEW Cast Solid carbide high-performance reamers for the machining of and achieving
More informationHigh Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making
Diameters: Metric: 26.0mm - 32.9mm (.1mm increments) 33.0mm - 41.0mm (.5mm increments) Inch: 1.031-1.625 (every 1/32 ) High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making pade
More informationCoroDrill 428 Wide range of application possibilities
A CoroDrill 428 Wide range of application possibilities Gun drills DEE HOLE MACHINING Highly productive gun drills B Easy to use Solid carbide gun drills 428.5 - Diameter range: 0.8-12.00 mm (.031 -.472
More informationExpansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts
MILLING JANUARY Page 1 / 8 Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts JANUARY Page 2 / 8 Highlights Milling cutters carrying a double-sided triangular insert with six 10 mm
More information2007 CATALOG. HIGH PERFORMANCE HSS-E PM Carbide Cut & Form Taps Thread Types UNC UNF M MF Standard Sizes 2-56 to 1 1 /2-6 M1.4 x 0.30 to M36 x 1.
HIGH PERFORMANCE PM Cut & Form Taps Thread Types UNC UNF M MF Standard Sizes 2-56 to 1 1 /2-6 M1.4 x 0.30 to M36 x 1.50 GUHRING Tap Compass Tap Selection Made Easy 2007 CATALOG HOW TO FIND THE MOST SUITABLE
More informationContents E2. R a. Introduction. ProfileMaster. EcoCut. Index. Productivity. System overview E42 E3-E4. Designation system E43.
Contents E2 Introduction ProfileMaster Productivity E3-E4 System overview E42 Designation system E43 EcoCut System overview E6 Chip grooves, grades E44-E46 Designation system E7 Machining methods E47-E48
More informationCircular Thread Milling Tools in Solid Carbide
Circular Milling Tools in Solid Carbide Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by high cutting speed and feed
More informationYE-SY16. Coated HSS-PM (Powder Metallurgy) Taps for High-Speed Tapping on Rigid CNC Machine
YE-SY16 Coated HSS-PM (Powder Metallurgy) Taps for High-Speed Tapping on Rigid CNC Machine FEATURES OF GEOMETRY Shorter thread length will reduce chip trouble at higher speed tapping conditions Tolerance
More informationYour Cutting Tool Solution for DRILLS
Your Cutting Tool Solution for DRILLS DRILLS / VISUAL INDEX AQUA DRILL EX STUB LENGTH AQ EX List 9600 List 9601 h8 15 0 h6 Metric s Fractional s Specs/s Speeds/s P22, 2 P2 AQUA DRILL EX JOBBER LENGTH AQ
More informationRange of products. Ern st Reime The tradition continues!
PI 0902 Range of products Ern st Reime The tradition continues! escription of the symbols Cutting geometry Thread form S 30 S = Helix angle 2x Through hole Blind hole Thread depth 2x Shank design Plain
More informationCutting Tools for Steels. Featuring coolant-fed premium cobalt taps
Cutting Tools for Steels Featuring coolant-fed premium cobalt taps Threading Coolant Fed Cobalt Taps 2B class of fit, ANSI shank and overall length Green color ring for easy identification Form C, Semi-Bottoming
More informationCost reduction through Performance. SHARK-CUT + SHARK-CUT Rebore. Introducing Shark-Cut Rebore Tools and Inserts for boring
Introducing SharkCut Rebore Tools and Inserts for boring www.arno.de Due to the unique positioning and insert geometry excellent hole quality is achieved also for deeper holes. Easy handling and efficient
More informationKeeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
More informationThe best of both worlds
The best of both worlds CoroMill 210 the ultimate roughing cutter for modern machining techniques Use CoroMill 210 for plunge milling to mill away large volumes of metal or for high feed milling of flat
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT -
More informationContents. Turning. Boring. Milling. Adaptors and clamping units. General
Contents Turning Contents 15 Information 16 Indexable inserts and cutting tool materials 20 Toolholders for turning, grooving and threading 69 Technical information 206 Boring Contents 237 Information
More information- Gundrill style Gundrill cross-hole style Both styles offer lengths up to " OAL (2400mm)
Drilling Range: Ø.551-1.102 (14mm - 28mm) Thread Types: STS Outer four start thread STS Inner single start thread DTS Outer four start thread A New Family of Deep Hole Drilling Tools - Conventional style
More informationMFH Micro. Micro Dia. Cutter for High Feed Machining. Low Resistance and Durable Against Chatter for Highly Efficient Machining
Micro Diameter High Feed Mills Micro Dia. Cutter for High Feed Machining Low Resistance and Durable Against Chatter for Highly Efficient Machining Shortens Rough Machining Times Replaces Solid End Mills
More informationGeneral Purpose Drill Section 2018 Master Catalog
General urpose Drill Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance
More informationD101 - JOBBER DRILLS - Silver Bullet
D101 - JOBBER DRILLS - Silver Bullet Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling EN CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT
More informationNPA. New Gear Milling Solutions. New Product Announcement. Page 1 / 8
NPA New Product Announcement Page 1 / 8 New Gear Milling Solutions Page 2 / 8 Highlights ISCAR introduces new solutions for gear milling based on solid carbide milling heads and cutters carrying tangentially
More informationMade in Germany. SELECTION Milling 2017 valid until Economical Tools for Milling
Made in Germany SELECTIO Milling 2017 valid unti8.02.2018 Economical Tools for Milling EMUGE-FRAKE Industry Solutions Economical high performance cutting tools for the demanding industries of today and
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT -
More informationKooltwist Solid Carbide Case Histories
Kooltwist Solid Carbide Case Histories CSE HISTORY for Style #293 Material: 17-4 PH Machine type: VMC Lubrication type: 50 PSI, synthetic Tool diameter:.1875 Hole depth: 1.125 blind SFM: 146 IPM: 9 Tool
More informationThread Milling Identification Guide FOR THREADING ON CNC MILLING MACHINES BY USING HELICAL INTERPOLATION PROGRAMS
Milling Milling Identification Guide CUTTERS FOR ING ON CNC MCHINES BY USING HEIC INTERPOTION PROGRMS DVNTGES: is produced in one tool pass Same tool holder and insert can produce both right hand and left
More informationIntroduction. Inserts. Tools. Technical information. Contents D18 D20 D30
Contents D1 Introduction D2 Grade overview Grade description Chip grooves System characteristics for Classic Application for Classic D2 D3 D8 D10 D13 System characteristics for 900 Application for 900
More informationEndmills. Variable Index & Helix Endmills at General. Purpose Prices!
Endmills Endmills at General Purpose Prices! Advanced Supply MMT-Productivity Advanced Supply programs offer tool management software and vending solutions with full flexibility to support our customers.
More informationSG DRILL SERIES POWDERED METAL COBALT DRILLS
SG DRILL SERIES POWDERED METAL COBALT DRILLS Contributing to Progress in the World of Product Manufacture The NACHI Difference ~ NACHI-FUJIKOSHI CORP. is a pioneer of precision cutting tools in Japan and
More informationHSS-E PM. Al- TiZrN TiAlN TiN Al- TiCN ~DIN 376 ~DIN 371 ~DIN 371/376 DIN 357 DIN 5157 DIN EN WN. Produktiv HX. Intensiv N-X.
THREAG TOOLS ISO-CODES M K N S H Steel, high-alloyed steel Stainless steel Grey cast iron, spheroidal and malleable cast iron Aluminium and other non-ferrous metals Special-, super- and Ti-alloys Hardened
More informationDescription Series Page. Turning. Grades for holemaking 256 IN1030, IN2505, IN6505. Replaceable tip drill shanks 258
Turning Description Series Page IN1030, IN2505, IN6505 Grades for holemaking 256 Replaceable tip drill shanks 258 Drill/chamfer combo solution for inch & metric tap sizes 274 Indexable drill 276 CHAMFERING
More informationALLROUNDER CUTTING TAPS
ALLROUNDER CUTTIN TAPS TECHNIK FÜR EWINDE ALLROUNDER Our multi-purpose cutting taps cover a comprehensive range of materials. They can be applied for the reliable machining of various materials ranging
More informationNPA. ISCAR Introduces the Narrowest mm Indexable Slitting Cutter. New Product Announcement. Page 1 / 5
NPA ISCAR Introduces the Narrowest - 0.8 mm Indexable Slitting Cutter Page 1 / 5 Page 2 / 5 Highlights ISCAR is introducing the narrowest indexable slitting tool in the market: indexable SGST disk slitting
More informationHSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:
Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30 tolerance: h8 Right-hand cutting 1,0 up
More informationB5 & B9 Reaming Heads
B5 & B9 Reaming Heads February 2011 1/14 February 2011 2/14 B5 & B9 reaming heads Following the very successful reaming performance obtained with B6, B7, and B8 reaming heads, TaeguTec has now expanded
More informationYMW U.S.A. Yonezawa Plant (ISO 9001: 2000) Fukushima Plant (ISO 9001: 2000) Aizu Plant (ISO 9001: 2000)
YAMAWA was founded with the lofty ideal of contributing to the progress and growth of the world s machine industry by producing taps, dies, center drills and other cutting tools of the highest quality.
More informationComplete range. Threading tools. Chip by Chip to the Top
Complete range Threading tools Chip by Chip to the Top Threading tools for every application wide range of thread forms thread cutting, forming and milling for all hole types with or without internal cooling
More informationNew Tip Geometry for Flat Bottom Hole-Making
New ip Geometry for Flat Bottom HoleMaking iameters: Metric: 8.00mm to 25.5mm (.5mm increments) Inch:.312" 1" Geometry: Steel & General Purpose PF esignation Grade: IN2505 Focus: ie Spring Industry SHCS
More informationUPDATED. High Productivity, Quick Change, Tipped Drills for Large Diameter Hole Making. Features & Benefits:
High Productivity, Quick Change, ipped Drills for Large Diameter Hole Making Ingersoll has introduced a new drilling line for large diameter hole applications. he Spadewist, with an optimized cutting edge
More informationTOOLING NEWS E-116. New SumiDrill Power Series Expansion. SDP Type. All-rounder for Drilling
TOOLING NEWS E-116 P M K N S H New SumiDrill Power Series Expansion All-rounder for Drilling - High efficient drilling in wide application range - General purpose application - Maximum performance by increased
More informationAlTiN Coated. UN Thread Internal & External. Length. # of Flutes
UN Thread UN Thread Internal & External 2-56.065.125 2 3 1/8 RM20099 4-40.085.180 2 3 1/8 RM20100 6-32.100.218 2 3 1/8 RM20101 8-32.115.250 2 3 1/8 RM20103 8-36.115.250 2 3 1/8 RM20105 10-24.120.312 2
More informationUTTING TOOLS. Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM
UTTING TOOLS Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM 7793 VXO12 Features & Benefits Silver satin plated surface & Improved heat treatment Improved body
More informationTapping Just Got Faster...
Tapping Just Got Faster... The Synchro Tap Series is specifically designed for modern machines, where the spindle revolution (A-Axis) & feed movement (Z-Axis) are synchronously controlled. Sutton Tools
More informationFor General Purpose. M M 120 / 1/16" - 4" M, MF, BSW, BSF, BA, BSP, BSPT, UNC, UNF, NPT, NPS ISO, ISO Long Shank, ANSI, BS 949.
THREADING DIES DEBURRING TOOLS DIES & DIE NUT - HSS & CARBON STEEL TUNGSTEN CARBIDE ROTARY BURR Series High Performance Cutting Tools PRODUCT PORTFOLIO Shape Description Totem Reference SA/ZYA Cylindrical
More informationJongen Werkzeugtechnik. Working depth. Drilling by JONGEN. 3 x D. BP 04 to 12
Jongen Werkzeugtechnik Working depth 3 x D Drilling by JONGEN BP 04 to 12 THE TOOL New at Jongen: universally applicable high-performance drill for use on lathes and milling centers. It offers the highest
More informationGermany usa canada France Great Britain mexico KomPass italy Threading austria china poland Japan russia korea switzerland spain india
KomPass Threading KomPass Threading Benefits for you As a strong brand of the KOMET GROUP, JEL and its innovations of stand for modern thread production. From conventional thread production to the technologically
More informationDEBURRING GROUP INSERTS - GROUP INSERTS - GROUP INDEXABLE 109 TOOLS 120 ISO TURNING 121 ISO THREADING 139 MILLING & MILLING CUTTERS
010 BUTT WELDED TLS 017 THREAD RESTRING FILES 019 SHEET & TUBE DRILLS 020 CUNTERSINKS Page...........................20 Page...........................21 Page...........................21 Pages.................2223
More informationDHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
More informationFLOSWISS MINIATURE TOOLS FOR SWISS MACHINES. Swiss Tooling: Threading, Grooving, Front & Reverse Turning and Parting for external machining!
FLOSWISS MINIAURE OOLS FOR SWISS MACHINES Swiss ooling: reading, Grooving, Front & Reverse urning and Parting or external macining! w w w.to o l l o.c o m MINIAURE OOLS FOR SWISS MACHINES INSER FG (doule
More informationCarbide-tipped or Cermet-tipped Special Designs Ø>20mm up to 76.2mm HR 500 HIGH-PERFORMANCE REAMERS GUHRING - YOUR WORLD-WIDE PARTNER
Carbide-tipped or Cermet-tipped Special Designs Ø>20 up to 76.2 HIGH-PERFORMANCE REAMERS GUHRING - YOUR WORLD-WIDE PARTNER Pictograms Tool material Carbide Carbide-tipped Cermet tipped Internal coolant
More informationProduct overview NEW NEW NEW. coated. Nutex Plus - with 3 cutting edges! Nutex Mini - minimum diameter 15 mm!! Nutex - approved and powerful
Product overview Nutex Plus - with 3 cutting edges! Nutex Plus HSS No 6055 p. 6 Nutex Plus caride No 6355 p. 7 NEW Holders No 6058 p. 8 Nutex Mini - minimum diameter 15!! NEW Nutex Mini HSS No 6041 p.
More informationM.A. Ford Where high performance is the standard. Phone: or
For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and precision in advanced solid carbide
More informationAQDEXOH10D, 15D, 20D, 25D, 30D, 40D, PLT AQMD
New USA Stock Items AQUA DRI EX CARBIDE DRI SERIES Aqua EX 2D, 4D Aqua EX Oil Hole 3D, D, D Aqua EX Deep Hole D, 1D, 20D, 2D, 30D, 40D Aqua EX Oil Hole Pilot Aqua EX Oil Hole Three Flute 3D, D Aqua Micro
More information