CONFERENCE PROGRAMME
|
|
- Franklin Gray
- 6 years ago
- Views:
Transcription
1 TURKEYTRIB 18 2 nd INTERNATIONAL CONFERENCE ON TRIBOLOGY April 2018 Elite World Prestige Hotel TAKSIM ISTANBUL TURKEY CONFERENCE PROGRAMME April 18-20, 2018 Istanbul TURKEY TURKEYTRIB'18 is organized by Ecovario Technology Company, Istanbul TURKEY
2 SPONSORS:
3 Programme 08:00-09:20 Registration (Plenary and Keynote speakers have 25 minutes, 5mns for questions. Technical presentations will take 10 mns of speech time and 5 mns of questions ). WEDNESDAY, 18 April 2018, 09:30-10:30, Plenary Speaker Session (PLE) : Conference Chairman: Prof. Dr. Hakan Kaleli 09: OPENING: Conference Chairman: Prof. Dr. Hakan Kaleli 09:30-10:00 Prof. Dr. Dae-Eun Kim-The Concept of Surface Compliance Control for Wear Reduction 10:00-10:30 Prof. Dr. Valentin Popov-Adhesive Wear and Particle Emission: Old Concepts and New Advancements WEDNESDAY, 18 April 2018, 10:30-12:30, Keynote Speaker Session (PLE) Conference Chairman: Prof. Dr. Hakan Kaleli 10:30-11:00 Prof. Dr. Adrian Rienacker-Tribology in Automotive Applications 11:00-11:30 Prof. Jeng-Haur Horng-Stribeck Curve In Three-Body Contact Condition 11:30-12:00 Dipl.-Ing. Rudolf Zechel-Kluber Lubrication 12:00-12:30 Matthias Pfadt, M. Sc.-Kluber Lubrication 12:30-12:35 GROUP PHOTO 12:35-13:30 LUNCH WEDNESDAY, 18 April 2018, 13:30-16:00 Lubrication and Lubricants, Session Chairman: Prof. Dr. Lorena DELENAU 13:30-13:45 Lorena Delenau-Texture Investigation of Scars Resulted from Lubrication with Soybean Oil Additivated with Nanographite 13:45-14:00 Oday I. Abdullah-The Elastohydrodynamic lubrication of Cam and Chamfered Flat Faced Follower 14:00-14:15 Ilya Kudish-Stressed State of Functionally Graded Elastic Solids Involved in Heavily Loaded Lubricated Contacts 14:15-14:30 Nurin Wahidah Mohd Zulkifli-Dispersion of Graphene in Various Bio-Based Lubricant and Its Effect on Tribological Properties 14:30-14:45 Lorena Delenau-Tribological Behavior of Soybean Oil with Nano Carbon as Additive 14:45-15:00 Tuğrul Soyusinmez-Tribological Properties and Machining Performance of Cutting Fluids with Additives Effects 15:00-15:15 Boucherit Hamid-A study of the concentration effects of solid pollution of lubricating oils on the stability of compliant Journal Bearings 15:15-15:30 Shuhaib Mushtaq-Friction and Wear Behaviour of Fe-Cu-Sn / MoS2 Self-Lubricating Composite 15:30-15:45 Binnur Sağbaş-Tribological Performance of PEEK with Green Lubricant Enhanced by Nano Hexagonal Boron Nitride Powder 15:45-16:00 Ali Usman-Numerical Investigation of Adiabatic Thermo-Tribological Performance of Piston Skirt Liner Lubrication at High Engine Speeds 16:00-16:30 Coffee Break / Poster Session 1
4 WEDNESDAY, 18 April 2018, 16:30-19:00 Coating Tribology; Session Chairman Prof. Dr. Bahattin İŞCAN ) 16:30-16:45 Bahattin İşcan-Thermal Stress Analysis and Mathematical Applications in Engine Piston with Ceramic Coating 16:45-17:00 Bahattin İşcan-Engine operation and thermal stress in a ceramic coated LHR diesel engine 17:00-17:15 Mustafa Safa Yılmaz-Effect of Electrical Parameters on Tribology of Micro Arc Oxidation (MAO) Coatings Formed on Aluminium 17:15-17:30 Radoslav Valov-Tribological Behavior of Chromium Coating, Modified with Diamond Nanoparticles, on Aluminum Substrate 17:30-17:45 Eray Abakay-Friction and Wear Properties of Nb-V-C-N Coatings Realized by Thermo-Reactive Deposition Technique 17:45-18:00 Sepideh Pourhashem-Investigating the New Aspects of Graphene Quantum Dots Derived from Carbon Black as Anti-Corrosion Nanofiller in Epoxy Coatings 18:00-18:15 Zeynep Burcu Acunaş Karagöz-Review of Tribological Behavior of Graphene Coatings on Piston Rings in Engines 18:15-18:30 Salih Akbar Zadeh-Numerical and experimental study of the wear behavior of nano TiN coating on steel substrate 18:30-18:45 Binnur Sağbaş-Metrological Characterisation of Metallic Implant Surfaces Coated by Electron Beam Deposition of Bioglass 18:45-19:00 Mun Hee Lee-Experimental Study of Y-jet Nozzle in Oil Burner Development WEDNESDAY, 18 April 2018, 13:30-16:00 Nanotribology; Session Chairman Asst. Prof. Dr. Amir MOTALLEBZADEH (Room B-Nilüfer, -3rd floor) 13:30-13:45 Amir Motallebzadeh-Nanotribological Characteristics of Laser Surface Melted Stellite 12+Mo Deposits 13:45-14:00 Ramazan Karslıoğlu-Tribological Behaviour of Ni-Co/Al2O3 Nanocomposite Produced by Different Current Type 14:00-14:15 Tanveer Iqbal-Nanoindentation Response of Fiber Reinforced PEEK Composites 14:15-14:30 Fellah Mamoun-Tribological behaviour of Nanostructured β-ti alloys as a function of Mo at.% content 14:30-14:45 Lotfi Faghi-Synthesis and Characterization of Nanocristalline FE53%SI28%B19% Alloy Prepared by High Energy Ball Mill 14:45-15:00 Mahsan AfzaliTabar-Comparsion of Nanoporous graphene/silica with Activated carbon/silica nanohybrids Pickering emulsions for Chemical Enhanced Oil Recovery (C-EOR) 15:00-15:15 Barış Engin-A Comparative Study on Tribological Properties of The Natural Rubber/Multi-Walled Carbon Nanotube /Graphite and Natural Rubber/Carbon Black Nanocomposites 15:15-15:30 Zeynep Burcu Acunaş Karagöz-Study of Tribological behavior of BN and DLC nano coatings on Piston Rings 15:30-15:45 Muharrem Pul-Effect of reinforcement ratios on mechanical properties and wear behavior of B4C + SiC reinforced AA 7075 composites 15:45-16:00 Azma Putra-Wear Performance of Diamond-like Carbon Coated Helical Gear Without Interlayer Under Dynamic Loading 16:00-16:30 Coffee Break / Poster Session 2
5 WEDNESDAY, 18 April 2018, 16:30-19:00 Friction and Wear; Session Chairman Prof. Dr. Gençağa PÜRÇEK (Room B-Nilüfer, -3rd floor) 16:30-16:45 Gençağa Pürçek-Effect of Resin Content on Friction and Wear Behaviour of Non-Asbestos Composite Friction Material Used in Brake Pad 16:45-17:00 Oday I. Abdullah-Thermal Stresses Analysis of a Dry Friction Clutches 17:00-17:15 Oday I. Abdullah-Analytical Simulation of Frictional Heat Generated in the Friction Clutches Using MATLAB GUI 17:15-17:30 H. Tarik Baytekin-How electrostatic tribocharging does effect friction coefficient? 17:30-17:45 Muhammad Khafidh-Friction and Wear Mechanism of Short-cut Aramid Fiber Reinforced Elastomers 17:45-18:00 Salih Akbar Zadeh- Experimental and Numerical Prediction of Friction Coefficient in Line and Point Contact in the Presence of Lubricant 18:00-18:15 Kareem Abd Rbo-Effect of Surface Texturing on the Friction of Rubber in Lubricated Sliding Contact. Application in Medical Syringes 18:15-18:30 Harun Yanar-A New Multi-Functional Tribometer: Application of Block-on-Ring Test Module 18:30-18:45 Reza Tikani-Vibration Analysis of a Flexible Rotor Supported by Squeeze Film Dampers Using Finite Element Method 18:45-19:00 Abdullah Sert-Tribological And Finite Element Study on The Elastic Behaviour of A Steel Sphere Against A Deformable Flat Material THURSDAY, 19 April 2018, 09:00-09:30 Conference Chairman Prof. Dr. Hakan KALELİ Keynote Speaker Session 09:00-09:30 MSc, Mech. Eng. Ahmet GÜVEN-Shell Co-TURKEY-Mobile Hydraulics THURSDAY, 19 April 2018, 09:30-11:00 TriboCorrosion, Roughness and Wear; Session Chairman Prof. Dr. Beliardouh NASSEREDDINE 09:30-09:45 Ali Ghanbarzadeh-A Parametric Study of the Newly-Proposed Asperity-Scale Tribocorrosion Model 09:45-10:00 Zulfiqar Ahmad Khan-Design and Development of Tribo-corrosion Condition Monitoring Technique 10:00-10:15 Mayank Tiwari-Effect of Sampling Interval, Correlation Length and Surface Roughness On Topography and Contact Parameters 10:15-10:30 Ali Çulha-Effect of Shot Peening Parameters on Surface Roughness of Inconel :30-10:45 Ali Çulha-Erosive Wear Behaviour of Shot Peened Inconel :45-11:00 Qiang Li-Wear Analysis of Multiphasic Heterogeneous Composites 11:00-11:30 Coffee Break / Poster Session 3
6 THURSDAY, 19 April 2018, 11:30-13:30 Composites, Material, Bearings; Session Chairman Asst. Prof. Dr. Zeynep PARLAR 11:30-11:45 İsmail Kaya-The Investigation of Tribological Behavior of Carbon-Fiber Reinforced Composite Materials 11:45-12:00 Khelifa Noureddine-Fatigue behavior and damage of composite laminates (3-point bending) 12:00-12:15 Ömer Özdemir-Thermo-Elastohydrodynamic Simulation of the Piston-Cylinder Contact in High-Pressure Pumps at 3000 bar 12:15-12:30 Atae Jafari-Tabrizi-Interferometric Measurements of Shaft Position in a Dynamically Loaded Journal Bearing 12:30-12:45 Ali Usman-Numerical Study of Surface Modification-based Improved Tribological Performance of Plain Bearing 12:45-13:00 Mohamed Ahmed Abdelkawy Hammad-K-M reactor, new technology for core shell materials 13:00-13:15 Ömer Barışkan Yasan-Investigation of Mechanical Properties and Tribological Performance of Unique Material Produced by Sequencing Copper wires and Combining with Hot Diffusion 13:15-13:30 Ömer Barışkan Yasan-Investigation of Micro Mechanical and Microstructural Behavior of Copper / Graphite Composite Wires During Rolling Process 13:30-14:30 LUNCH THURSDAY, 19 April 2018, 09:30-11:00 Fundamentals of Friction and Wear-Contact Mechanics-Tribotesting; Session Chairman Prof. Dr. Christian Busch, (Room B-Nilüfer, -3rd floor) 09:30-09:45 Prof. Dr. Christian Busch-Mobile into old age 09:45-10:00 Aid Abdelkrim-Fatigue life prediction under blocks loading based on a new damage model for spheroïdal graphite cast-iron loaded by torsion and plane bending 10:00-10:15 Ali Abdul Munim Alhattab-Effect of Electron Beam Surface Melting on Microstructure and Wear Behaviour of PTA Deposited Stellite 12 Hardfacing 10:15-10:30 Onur Tazegül-Influence of Thermal Oxidation Time on Tribology Behaviour of Ti6Al4V Alloy 10:30-10:45 Abdullah Göçer-The Effects Of B4c Ceramic Sizes On Wear Behavior Of Al 6063metal Matrix Composites 10:45-11:00 Maruti Patil-Two-stage Helical Gearbox Multi-Objective Optimization with Inclusion of Tribological Constraints 11:00-11:30 Coffee Break THURSDAY, 19 April 2018, 11:30-13:30 Fundamentals of Friction and Wear- Contact Mechanics- Tribotesting Session Chairman Prof. Dr. BOUZIDI NEDJIMA, (Room B-Nilüfer, -3rd floor) 11:30-11:45 Bouzidi Nedjima-Porous ceramics at high temperatures as filters: microstructure and mechanical properties 11:45-12:00 Gülşah Akıncıoğlu-Investigation of friction wear performance of boron oxide added brake pads sample 12:00-12:15 Gülşah Akıncıoğlu-Evaluation of tribological properties of eco-friendly brake pad added hazelnut shell dust 12:15-12:30 Okan Gül-Effects of Basalt Fiber and Boron Oxide Hybrid Addition on Adhesive Wear and Thermomechanical Properties of TPE Matrix Composites 12:30-12:45 Okan Gül-Zeolite and Carbon Fiber Reinforced PPS Matrix Hybrid Composites: Tribological and Thermomechanical Properties 12:45-13:00 Okan Gül-Investigation the Tribological and Thermomechanical Properties of Bentonite and Basalt Fiber Reinforced PPS Matrix Composites 13:00-13:15 Demchi Farouk-Polyvinyl alcohol, a new way for efficient redox coating process from saponification of polyvinyl acetate 13:15-13:30 Ahmet Yavuz-Importance Of Solid Particle Erosion In Industrial Areas 13:30-14:30 LUNCH
7 THURSDAY, 19 April 2018, 14:30-16:15 Lubricants, Session Chairman Assoc. Prof. Dr. Mohd Fadzli Bin Abdollah (Room B-Nilüfer, -3rd floor) 14:30-14:45 Mohd Fadzli Bin Abdollah-Physical properties of biodiesel from vegetable oil 14:45-15:00 Noreffendy Tamaldin-Growth of graphene from solid waste products 15:00-15:15 Sergey V. Fedorov-Energy and Entropy Triboanalysis of Natural Machine 15:15-15:30 Gökçe Mehmet AY-A Treatise On Using Hexagonal Boron Nitride For Space Lubrication Applications 15:30-15:45 Gökçe Mehmet AY-Ultrasonic Assisted Machining Methods: A Review From :45-16:00 Gökçe Mehmet AY-Investigation The Effects Of Ultrasonic Assisted Turning On Surface Properties Of Ti6al4v Alloy 16:00-16:15 Salih Akbar Zadeh-Two-body and Three-body Wear of Nickel-Titanium Shape Memory Alloy 16:15-16:45 Coffee Break/ Poster Session 4 THURSDAY, 19 April 2018, 16: 45-18:30 Surface, Coating, Wear, Tools; Session Chairman Assist. Prof. Senai YALÇINKAYA (Room B-Nilüfer, -3rd floor) 16:45-17:00 Senai Yalçınkaya-Plane Surface Grinding Implementation of Experimental Design and Optimal Solutions with the Taguchi Method 17:00-17:15 Senai Yalçınkaya-A research for Wear Behaviours of Coated Cutting Tools: A Mini Review 17:15-17:30 Faiz Muhaffel-Structure and Tribological Properties of Fluidized Bed Nitrided Surfaces on H13 Hot Work Tool SteelSTAMPING DIE WEAR INVESTIGATION WITH DIFFERENT HARD-COATINGS 17:30-17:45 Faiz Muhaffel-Synthesis of an Antibacterial and Wear-resistant Multilayer Coating on Biomedical Titanium-based alloys 17:45-18:00 Hua Su-Performance and Parameter Sensitivity Analysis of Finger Seal with Radial Clearance: Based on Computational Fluid Dynamics Approach 18:00-18:15 Badr Azzam-Performance Evaluation Of Wind Turbine Blades Coated With Composite Materials 18:15-18:30 Abdullah Sert-Investigation on Tribological Behavior of Laser Surface Treated Ti6Al4V Alloy April 19, 2018 Thursday-Elite World Hotel Prestige 19:30-23:30 GALA DINNER April 20, 2018 Friday, :00 Fundamentals of Friction and Wear- Contact Mechanics- Tribotesting Session Chairman- Prof. Dr. Harun MİNDİVAN, (Room B-Nilüfer, -3rd floor) 09:30-09:45 Harun Mindivan-Tribocorrosion Behavior of Electroless Ni-P/Ni-B Duplex Coating on AA7075 Aluminum Alloy 09:45-10:00 Selman Demirtaş-Characterization of the Friction and Wear Effects of Graphene Nanoparticles in Oil on the Ring/Cylinder Liner of Internal Combustion Engine 10:00-10:15 Murat Kıyak-Applications of Cutting Fluids on Machining 10:15-10:30 Hani Abdallah AL-Rawashdeh-Comparison between Selection Methods of Genetic Algorithm used in Scheduling Problems (FSP) 10:30-10:45 Faiz Redza Ramli-Warping deformation by starch adhesion in open source 3D printer 10:45-11:15 Coffee Break 11:15-11:30 Kebabsa Tarek-Experimental study of a turbo-alternator in industrial environment using cyclostationarity analyses 11:30-11:45 Nae Ion-The Reduction Factor Of Axial Forces At The Assemblies Through Elastic Tightening With Intermediate Elements 11:45-12:00 Amrut Shrikant Mulay-A decision making framework for overall performance of SPIF using combined Multi-attribute decision making method 12:00-12:15 Selman Demirtaş-Tribotest of Engine Piston Ring/Cylinder Liner Pairs With Different Nanoparticles Added into Engine Oil END OF CONFERENCE
8 POSTER SESSIONS April 18, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 1 16:00 16:30 Benaissa Sihem - The Effect of Thermomechanical Treatments on the Relaxation in the Poly (vinylidene fluoride) Brahim Bourouga - Numerical Study of the Behavior of the Contact Parameters at a Solid-Solid Planar Interface under Increasing Loading Haddour Lillia - Wear and Dielectric Behavior Of Polycristalline Alumina Keraghel Fatiha - Study Of The Wear Of A Sintered Bronze Keraghel Fatiha - Wear Resistance Of a Bronze Cu10% Sn Keraghel Fatiha - Tribological Study Of Sintered Cu-Sn Powders Mamoun Fellah - Friction and Wear Behaviour Of Milled Titanium Alloys Ti-6Al-7Nb as Function of Milling Time Mamoun Fellah - Structural and Tribological Proprieties of Calcined Nano-Ceramic α Alumina (α-al2o3) for Biomedical Applications Amine Hadj Taieb - Atomic Force Microscopy of Polyester and Polypropylene Fibers: Study of Friction and Roughness Hammadi Fouzia - Mechanical and Tribological Properties of Ti -6Al-xFe Alloy Linda Aissani - Effect of Zr on the Properties Of Chromium Nitride Thin Films Produced by R.F Magnetron Sputtering System Hezil Nawel - Effect of Al Content on Tribological Behavior of Cr-Al-N Coating System M. Bendoukha - Anisotropic Response of Holzapfel Constitutive Model for the Lumbar Spine Considering Degeneration-Related changes Constantin Georgescu - Influence of the Additive Nature in Soybean Oil on Rheological Behavior Anfal Kaddour - Microstructural and Structural Study of The Ball-milled Ni80Cr20 Alloy April 18, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 2 16:00 16:30 Fatiha Benghanem - Protection of XC48 Steel Corrosion with New Schiff Base in 0.5 M H2SO4 Solution Fatiha Benghanem - Investigation on the Inhibition Behavior of a 2,3-bis(3-hydroxy benzylidène-amine) Pyridine for Steel in Solution Simulating Water of Pores in Absence Khennafi-Benghalem Nafissa - Friction and Transfer Matter Between HSS Steel and Polystyrene Crystal S. Marouani - Electrochemical and Quantum Chemical Studies of Synthesized Benzimidazole Derivative as Eco-friendly Corrosion Inhibitor for XC52 Steel S. Marouani - Electrochemical and DFT Study of the Inhibition of the Corrosion of Concrete Reinforcement with a New Schiff Base in Presence of 0.5 M NaCl Rıdvan Gecü - Tribological Characterization of 304 Stainless Steel Reinforced AA7075 Aluminium Matrix Composite Produced by Melt Infiltration Casting Nassereddine BELIARDOUH - Tribological Performances of 13Cr5Ni2Mo Super-Martensitic Stainless Steel Fatiha Siahmed - Elaboration, Characterization of Biocomposite Material: Luffa Cylindrica/Epoxy Ould Chikh El Bahri - The Weldability Study of the Polymeric Materials by Friction Stir Welding Meddah Hadj Miloud - Experiments and Numerical Analysis Study of the Polymeric Materials Weldability by Friction Stir Spot Welding (FSSW) Septi Boucherit - Statistical Analysis of Flank Wears in Hard Turning Using RSM, ANN and Desirability Function Ahmed Belbah - Friction and Wear Behaviour of WC-Co Iulia Graur - Effect of Composition on Friction Coefficient of Tryptophan Composites Yong-Suk Kim - Tribo-Characteristics of DLC Coated H13 Tool Steel Sliding Against AZ31 Mg Alloy with Mg(OH)2 Layer Fatima Zohra Benlahreche - Effect of Thermochemical Treatment En Corrosion Behaviour of C22 Carbon Steel
9 April 19, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 3 11:00 11:30 Uğur Günay - Erodent Size Effect on the Erosion of Basalt Base Glass-Ceramics Nouicer El Amine - Comparative Study of Nitriding Treatment on the Physico-Chemicals Properties of Two Materials Khalissa Ariane - Crystallization Study of LMAS Glass-Ceramic by Differential Thermal Analysis Abdelaziz Gahmousse - Elaboration and Characterization of Glass Emissivity with Different Iron (III) Oxide Concentrations Doğuhan Ufuk Işık - On the Evaluation of Friction Coefficients Using Grids of Ring Compression Test Specimen Belbali Assia - Effect of Temperature and Time of Sintering on the Microstructural Characteristics of Chamot - Carbon Mixtures Uğur Barut - Effect of Current Type on Tribological Properties of Nickel Boron Coatings Produced by Electrodeposition Uğur Barut - Effect of Nano SiC Amounts on Tribological Properties of Ni-B-Co Based Nano Composite Coatings Produced by Electrodeposition Uğur Barut - Effect of Different Current Type on Tribological Properties of Ni-B-Co/SiC Nano Composite Coatings Produced by Electrodeposition Ramazan Karskıoğlu - Effect of Current Density on Tribological Properties of Ni-B-Co/SiC Nano Composite Coatings Produced by Electrodepositions Ayadi Abdelwahhab - Repairing of Eroded Glass Surface by Thermochemicals Treatments, and Sol Gel Organic and Hybrid Silica Coatings Sehab Nadjette - Effect of Mechanical Activation on the Synthesis of Ti2AlC MAX Phase by ETE Hossem Taallah - Preparation and Characterization of Low-Emissivity WO3 Glass-Ceramic Glazing Sehab Fahima - Numerical and Experimental Study of Crack Propagation in a Stainless Steel Pipe Saida Bouyegh - Mechanical and Corrosion Studies on Magnesium alloy as Biomaterials April 19, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 4 16:15 16:45 Eray Abakay - Tribological Properties of Molybdenum Silicide Coatings Deposited by Pack Method Eray Abakay - Wear Characteristics of Fe-Nb-V-B Based Hard Faced Steel Yalçın Erdoğan - Damage Evaluation of CFRP/CFRP Adhesive Joints Under Different Laser Fluences with CO2 and UV Laser Bülent Aktaş - Influence of Er2O3 Addition on Tribological Properties of Zirconia Norelhouda Lameche - Laser Damage of ZnO Thin Films A. Chandrashekhar - Prediction of Flash Temperature by Considering Roughness of the Worn Surface Under Dry Sliding Wear Nazlı Acar - Tribological and Rheological Characterization of New Completely Biogenic Lubricating Greases Melia Hamici - Effect of the Synthesis Method and Substrate on Optical and Structural Properties of Electrochemically Deposited ZnO Thin Films Lakhdar Boulanouar - Experimental Investigation on the Machinability of Hardened and Unhardened C18 Steel in Drilling M. Benghersallah - Statitical Analysis of Surface Roughness and Tool Life Using (RSM) in Face Milling of AISI Bearing Steel with Multilayer Coating Cutting Tool Louafi Snani - Study of The Nozzle Plugging Phenomenon Nuray Beköz Üllen - Investigation of Cutting Techniques of Hardox Steels Nuray Beköz Üllen - Investigation of The Wear Resistance of Hardox Steel Plates Khadoudj Guessoum - Micro-arc Oxidation of Zinc in KOH Media at High Voltage Djalila Boudemagh - Synthesis and Physicochemical Characterization of Hydroxyapatite Nanoparticles H. Tarik Baytekin - Dependence of Tribocharging on Degradation of Lubricants END OF CONFERENCE
CONFERENCE PROGRAMME
TURKEYTRIB 18 2 nd INTERNATIONAL CONFERENCE ON TRIBOLOGY 18 20 April 2018 Elite World Prestige Hotel TAKSIM ISTANBUL TURKEY CONFERENCE PROGRAMME April 18-20, 2018 Istanbul TURKEY TURKEYTRIB'18 is organized
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More informationThermal Durability and Abradability of Plasma Sprayed Al-Si-Polyimide Seal Coatings p. 85
Trends in Automotive Applications of Thermal Spray Technology in Japan p. 1 Production Plasma in the Automotive Industry: A European Viewpoint p. 7 The Effect of Microstructure on the Wear Behavior of
More informationINTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
More informationMetallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
More informationComposite Materials. Metal matrix composites
Composite Materials Metal matrix composites Introduction The properties that make MMCs attractive are high strength and stiffness, good wear resistance, high service temperature, tailorable coefficient
More informationCONTENTS. Preface to the 3rd Edition Acknowledgments
CONTENTS Preface to the 3rd Edition Acknowledgments vii ix CHAPTER 1 INTRODUCTION 1 1.1 Definition of materials degradation 1 1.2 Definition and significance of surface engineering 4 1.3 Classification
More informationManufacturing Processes 1 (MDP 114)
Manufacturing Processes 1 (MDP 114) First Year, Mechanical Engineering Dept., Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb 1 Cutting-Tool Materials and Cutting Fluids 2 Fracture
More informationWater Droplet Impingement Erosion (WDIE) Water Droplet Impingement Erosion (WDIE) Solid Particle Erosion. Outline
Water Droplet Impingement Erosion (WDIE) Incoming air temperature Outline Mass flow rate Introduction Example Output power Energy Demand Temperature Turbine efficiency 1 F 0.3-0.5% Turbine inlet cooling
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC C COOPERATIVE PATENT CLASSIFICATION CHEMISTRY; METALLURGY (S omitted) METALLURGY C22 METALLURGY (of iron C21); FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS (production of
More informationSurface engineering for new industrial applications - bio application
Surface engineering for new industrial applications - bio application Dr. Yangchun Dong Bsc. Msc. PhD Tel.: +420541143323 Mobile: +420776395588 30/10/2013, Brno Introduction 1. A few questions to answer:
More informationCutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
More informationCLADDING AND HARDFACING POWDERS
CLADDING AND HARDFACING POWDERS GTV consumables for Laser Cladding Version 1.1 Ni: NICKEL BASED POWDERS GTV No. Description Particle size Hardness C Ni Cr B Si Fe Mo Others 31.25.10 Inconel 625-160 +53
More informationIndex. Automotive engines, silicon nitride products development, 83-94
Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,
More informationWEDNESDAY SEPTEMBER 20, 2017
WEDNESDAY SEPTEMBER 20, 2017 Session Title: Multiscalle modeling and connecting to continuum level descriptions Chairperson: Harmandaris-Goddin 11.20 Atomistically informed full-field simulation of tempered
More informationJānis Grabis. Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing
Jānis Grabis Plasma chemical synthesis of multicomponent nanopowders, their characteristics, and processing Outline Introduction nanoparticles, their preparation methods Experimental synthesis of multicomponent
More informationMobile repair of hard coated rolls and machine components. ICE Europe Technical Program, Dr. A. Barth,
Mobile repair of hard coated rolls and machine components ICE Europe Technical Program, Dr. A. Barth, 22.03.2017 Technological Competence and Scope Full Service Surface Technology Surface Treatments Mechanical
More informationEnhanced Corrosion Resistance of AZ91 Mg Alloy by Plasma Electrolytic Oxidation with Kmno4
About the Editor About the Organizers Magnesium Technology 2010 Poster Session Corrosion Resistance of Graphite Anode for Magnesium Electrolyzers Plenary Session Magnesium in Aerospace Applications - Flammability
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More informationWEIGHT LOSS FUNCTIONS FOR TOLERABLE WEAR RATE OF AA1100/BN METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 5, September October 2016, pp.09 17, Article ID: IJMET_07_05_002 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=5
More informationWEAR PROPERTIES OF PLASMA NITRIDED INCONEL 718 SUPERALLOY
WEAR PROPERTIES OF PLASMA NITRIDED INCONEL 718 SUPERALLOY Halim Kovacı 1, Hojjat Ghahramanzadeh ASL 1, Çiğdem Albayrak 2, Akgün Alsaran 1 1 Ataturk University, Erzurum, Turkey 2 Erzincan University, Erzincan,
More informationManufacturing. Engineering. and Technology. Serope Kalpakjian. K. S. Vijay Sekar. Steven R. Schmid SEVENTH EDITION IN SI UNITS.
Manufacturing Engineering and Technology SEVENTH EDITION IN SI UNITS Serope Kalpakjian Illinois Institute of Technology Steven R. Schmid The University of Notre Dame SI Edition Contributions by K. S. Vijay
More informationComparison of the Effects of Surface Roughness of Wrought Aluminium Alloys on the Surface of Steel
Comparison of the Effects of Surface Roughness of Wrought Aluminium Alloys on the Surface of Steel Riyadh A Badr* School of Engineering, University of Samarra, Samarrah, 34010 - Salah Ad Din, Iraq Research
More informationMANUFACTURING PROCESSES. Tool Material & Cutting Fluid
MANUFACTURING PROCESSES Tool Material & Cutting Fluid 1 CUTTING TOOL MATERIAL Success in metal cutting depends on the selection of the proper cutting tool (material and geometry) for a given work material.
More information2.3.3 Plasma Sulphurizing Restriction of Plasma Nitriding Development of Plasma Nitriding in China References...
Contents 1 Introduction... 1 1.1 Engineering Materials and Its Surface.... 1 1.2 Surface Engineering and Its Classification... 2 1.2.1 Concept of Surface Engineering... 2 1.2.2 Surface Hardening Technology...
More informationJAI Engineers UK Limited. Advanced Technical Ceramic Precision Products
Advanced Technical Ceramic Precision Products JAI Engineers UK Ltd. JAI Pumping Technologies Ltd. JAI ENGINEERS UK LIMITED JAI PUMPING TECHNOLOGY LIMITED JAI Engineers UK Ltd. JAI Pumping Technologies
More informationApplication of DC-Arc Plasma Coating
Application of DC-Arc Introduction Application of Plasma Coating is nearly unlimited and is used in almost all sectors of industry; Table1. In many industries the quality of their products and the productivity
More informationDevelopment of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the
Development of New Generation Of Coatings with Strength-Ductility Relationship, Wear, Corrosion and Hydrogen Embrittlement Resistance Beyond the Current Materials Accomplishments till date As the structural
More informationPast, Present and Future of the Republic Center for Structure Researches of Georgian Technical University
Head of the Center Professor Elguja Kutelia Past, Present and Future of the Republic Center for Structure Researches of Georgian Technical University Outlook New generation nano-porous brake pads New ADI
More informationPHS6317 NANO-ENGINEERING OF THIN FILMS
PHS6317 NANO-ENGINEERING OF THIN FILMS Ludvik Martinu, ing., PhD Professor Chairholder: NSERC Multisectorial Industrial Research Chair in Coatings and Surface Engineering ludvik.martinu@polymtl.ca www.polymtl.ca/larfis
More information4-in-1 Nano Machine & Technology
4-in-1 Nano Machine & Technology Machine combines 1) CVD, 2) PVD, 3) ion saturation and 4) ion-treatment processes in one (1) production cycle in one machine that produces functional coatings used to harden
More informationLecture 5. Chapter 7. Range of Mechanical Properties for Polymers. The University of New Mexico. The University of New Mexico TABLE 7.
Lecture 5 Chapter 7 Range of Mechanical Properties for Polymers TABLE 7.1 Material UTS (MPa) E (GPa) ABS 28 55 1.4 2.8 ABS, reinforced 100 7.5 Acetal 55 70 1.4 3.5 Acetal, reinforced 135 10 Acrylic 40
More informationMold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University
12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required
More informationCOMPOSITES. Gayathri & Yamuna
COMPOSITES Definition A composite is a combination of two or more simple materials to get another material with better properties Examples Wood (a natural composite - comprising cellulose fibers in a lignin
More informationTypical aerospace-standard materials
JOHANN MAIER GmbH & Co. KG Schockenriedstraße 3 70565 Stuttgart-Vaihingen Typical aerospace-standard materials 1.4314.7 Stainless, austenitic steel 0,05C-1Cr-Ni X5 CrNi 1 1.4301 / AISI 304 60 * * Special
More informationUnited Surface Technologies
United Surface Technologies Engineered Coating Solutions Established 1986 www.ust.com.au Introduction United Surface Technologies (UST) Pty Ltd is an ISO 9001:2008 certified surface engineering company
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More information2 9 & 3 0 J U N E, P A R I S - F R A N C E
2 9 & 3 0 J U N E, 2 0 1 4 P A R I S - F R A N C E HIGH-TECH MATERIALS FOR TOMORROW'S LARGE SCALE INDUSTRIAL DEVELOPMENTS: ENERGY GENERATION AND TRANSPORT, ADVANCED STRUCTURAL DESIGNS, AND DATA PROCESSING
More informationApplications. - APS coatings -
Applications - APS coatings - Applications of APS coatings Typical spray materials Oxide ceramics: Cr 2 O 3, Al 2 O 3, Al 2 O 3 /TiO 2 Compounds: Ni/C G, AlSi/Polyester, [WC/Co(Cr), Cr 3 C 2 /NiCr] Metals:
More informationHard-facing Material. Scope of Application. Characteristics. The Hard-facing Materials Cover:
Hard-facing Material The Hard-facing Materials Cover: Cast Tungsten Carbide (Ordinary and Spherical), Cemented Carbide Pellet (YQ), Spray Welding Powder (Ordinary and Spherical), Single-crystal WC Powder
More informationCourse: Technology of Surface Coating. Prof. A. K. Chattopadhyay
Course: Technology of Surface Coating Prof. A. K. Chattopadhyay Lecture: 1 Introduction 1. State some functions of solid material 2. State some desirable combination of mechanical properties of materials.
More informationTribology Module4: Lubricants & Lubrication
Tribology Module4: Lubricants & Lubrication Q.1. What is fluid film lubrication? What is the difference between hydrostatic and hydrodynamic lubrication? Ans: Fluid film lubrication is a generic term used
More informationWear Characteristics of AA5050/TiC Metal Matrix Composites
Wear Characteristics of AA5050/TiC Metal Matrix Composites A. Chennakesava Reddy Associate Professor, Department of Mechanical Engineering, JNTU College of Engineering, Hyderabad, India dr_acreddy@yahoo.com
More informationMaterial development for emerging energy technologies
Material development for emerging energy technologies Need and Approach Need Sustainable power generation is needed for the mitigation of global warming caused by greenhouse gas emissions. Advanced materials
More informationCombined effects of graphite and sulfide on the tribological properties of bronze under dry conditions
Received 14 October 2016; received in revised form 8 November 2016; accepted 18 November 2016. To cite this article: Hirai et al. (2016). Combined effects of graphite and sulfide on the tribological properties
More informationSurface Modification of AISI 1020 Steel with TiC Coating by TIG Cladding Process
Surface Modification of AISI 1020 Steel with TiC Coating by TIG Cladding Process Supriya Shashikant Patil 1 Dr. Sachin K Patil 2 1 PG Student, Production Engineering Department, ajarambapu Institute of
More informationCHAPTER INTRODUCTION
1 CHAPTER-1 1.0 INTRODUCTION Contents 1.0 Introduction 1 1.1 Aluminium alloys 2 1.2 Aluminium alloy classification 2 1.2.1 Aluminium alloys (Wrought) 3 1.2.2 Heat treatable alloys (Wrought). 3 1.2.3 Aluminum
More informationFerrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons
Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape
More informationEvaluation of Microstructure, Mechanical and Wear Properties of Aluminium Reinforced with Boron Carbide Nano Composite
Indian Journal of Science and Technology, Vol 9(20), DOI: 10.17485/ijst/2016/v9i20/84294, May 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Evaluation of Microstructure, Mechanical and Wear Properties
More informationCERTESS Carbon Diamond-like-Carbon (DLC) Tribological coatings Extreme Hardness + Very low friction = Exceptional Wear Resistance
www.hefusa.net sales@hefusa.net Carbon Diamond-like-Carbon (DLC) Tribological coatings Extreme Hardness + Very low friction = Exceptional Wear Resistance PVD Coatings Overview Physical Vapor Deposition
More informationHigh-Quality Tool Steel Hot-Work Steels
High-Quality Tool Steel Hot-Work Steels Hot-forming tools are needed for chipless forming of workpieces from iron and non-ferrous materials and their alloys as well as the production of articles of daily
More informationDevelopment of Metal Matrix Composite for Cylinder Block
Seoul 2000 FISITA World Automotive Congress F2000A065 June 12-15, 2000, Seoul, Korea Development of Metal Matrix Composite for Cylinder Block Manabu Fujine 1) Shinji Kato 1) Toshihiro Takami 1) Shigeru
More informationINSTRUCTION PROFESSOR K. KOMVOPOULOS. Mechanical Behavior of Engineering Materials (ME 108) (Undergraduate course, junior/senior level)
INSTRUCTION PROFESSOR K. KOMVOPOULOS. Mechanical Behavior of Engineering Materials (ME 108) (Undergraduate course, junior/senior level) Part I Microstructure and Deformation of Materials Alloying and Hardening
More informationFundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p.
Fundamentals p. 1 Mechanical Engineering Design in Broad Perspective p. 3 An Overview of the Subject p. 3 Safety Considerations p. 5 Ecological Considerations p. 9 Societal Considerations p. 11 Overall
More informationMachinability is the ease with which a given material may be worked with a cutting tool
Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in
More informationSelf Healing Ceramic (Surfaces)
Self Healing Ceramic (Surfaces) KIVI NIRIA Jaarcongres 23 november 2011 Matthijn de Rooij University of Twente Laboratory for Surface Technology and Tribology Introduction Technical Ceramics Crystalline
More informationOverview of Sulzer Metco Compressor and Turbine Abradable Technology
Overview of Sulzer Metco Compressor and Turbine Abradable Technology Scott Wilson 8th International Charles Parsons Turbine Conference 05 Sep 2011-08 Sep 2011, University of Portsmouth, Portsmouth, UK
More informationCUTTING TOOL TECHNOLOGY
CUTTING TOOL TECHNOLOGY Tool Life Tool Materials Tool Geometry Cutting Fluids Cutting Tool Technology Two principal aspects: 1. Tool material 2. Tool geometry Three Modes of Tool Failure Fracture failure
More informationLOW HEAT INPUT WELDING ALLOYS
ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,
More informationBearings for Extreme Special Environments-Part 1 Bearing Materials and Solid Lubricants
Bearings for Extreme Special Environments-Part 1 Bearing Materials and Solid Lubricants H. TAKEBAYASHI * *Product Engineering Center, EXSEV Project Office Koyo was the first company to develop and produce
More informationCOMPOSITE MATERIALS HANDBOOK. Volume. Metal Matrix. Composites
COMPOSITE MATERIALS HANDBOOK Metal Matrix Volume 4 Composites TABLE OF CONTENTS FOREWORD... ii SUMMARY OF CHANGES... xiii 1. GUIDELINES... 1 1.1 GENERAL INFORMATION... 1 1.1.1 INTRODUCTION... 1 1.1.2 PURPOSE...
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationMaterial Product Data Sheet Cobalt Chromium [Nickel Tungsten Silicon] Carbon Alloy Powders (Similar to Stellite, Ultimet, Mar M 509)
Material Product Data Sheet Cobalt Chromium [Nickel Tungsten Silicon] Carbon Alloy Powders (Similar to Stellite, Ultimet, Mar M 509) Powder Products: Amdry MM509, Amdry MM509-C, Amdry X40, Diamalloy 4060NS,
More informationMACHINING PERFORMANCE AND WEAR MECHANISM OF TiAlN-COATED INSERT
International Journal of Mechanical and Materials Engineering (IJMME), Vol.6 (2011), No.3, 414-418 MACHINING PERFORMANCE AND WEAR MECHANISM OF -COATED INSERT R.J. Talib, H.M. Ariff and M.F. Fazira AMREC,
More informationMETHODS OF COATING FABRICATION
METHODS OF COATING FABRICATION Zbigniew Grzesik http://home.agh.edu.pl/~grzesik Department of Physical Chemistry and Modelling DEFINITION The coating is the thin outer layer of the object, which physiochemical
More informationSUNDAY, SEPTEMBER 17, 2017 DAY 1 - MONDAY, SEPTEMBER 18, 2017
1 SUNDAY, SEPTEMBER 17, 2017 DAY 1 - MONDAY, SEPTEMBER 18, 2017 LOBBY 9:00-18:00 Registration LOBBY 8:00-18:00 Registration 9:00-10:00 10:00-10:20 10:20-11:40 ROOM 201 13:00-18:00 Training Course Opening
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationAvailable online at Fatigue Fatigue in AISI 4340 steel thermal spray coating by HVOF for aeronautic application
Available online at www.sciencedirect.com Procedia Procedia Engineering Engineering 2 (2010) 00 (2009) 1617 1623 000 000 Procedia Engineering www.elsevier.com/locate/procedia Fatigue 2010 Fatigue in AISI
More informationGTV Spray powder catalogue
GTV Spray powder catalogue Application fields Overhaul / Repair Wear protection Corrosion protection Bond Coats Electrical isolation Thermal isolation Clearance control (Abradable coatings) Powder morphology
More informationMONDAY SEPTEMBER 18, 2017
MONDAY SEPTEMBER 18, 2017 Session Title: C1.1: Coatings and thin films 1/6 -Friction Chairperson: A. Cavaleiro, R. Peng PM2:17.30-19.50 17.00-17.30 PM1:15.00-17.00 11.00 11.20 11.40 Adhesion and tribological
More informationReview of Manufacturing Processes
Review of Manufacturing Processes ME 682 Dr. Han P. Bao Mechanical Engineering, ODU ME 682 Module 3 1 Engineering Materials The four major categories: Metal Plastics Ceramics Composites 1- Metals: Cast:
More informationCOBALT BASE POWDERS. resistance, excellent sliding properties. (Tribaloy 900)
COBALT BASE POWDERS HA1103 Co 25Cr 10Ni 7.5W 221103-45 + 5 µm (-325 mesh + 5 µm) CPW 236 EMS 52432 XXIII SMR 33008 MSRR 9507/23 PWA 1316 Resistance to abrasive wear, sliding wear, fretting and cavitation.
More information1-Materials Science & Materials Engineering
1-Materials Science & Materials Engineering 1-1-Structure & Properties Relationship (Materials Science or Materials Engineering) Processing Structure Properties Performance Sub Atomic Atomic Sub Atomic
More informationPRACTICAL APPLICATIONS OF THE CONCEPT OF SURFACE INTEGRITY
PRACTICAL APPLICATIONS OF THE CONCEPT OF SURFACE INTEGRITY Antonín Kříž, Lukáš Kafka, Jiří Šimeček This paper is one of outcomes of the project no. FI-IM4/226, which is co-funded by the Ministry of Industry
More informationUse the arrow keys to easily navigate through the course.
STEEL Use the arrow keys to easily navigate through the course. Back Next 1 STEEL 2 A BRIEF HISTORY OF STEEL The history of steel is closely connected to the development of human culture and civilization.
More informationMICROSTRUCTURE CHARACTERIZATION OF LASER-CLAD NICKEL ALUMINUM BRONZE ALLOYS USING TRANSMISSION ELECTRON MICROSCOPY By J.C. Bennett READ ONLINE
MICROSTRUCTURE CHARACTERIZATION OF LASER-CLAD NICKEL ALUMINUM BRONZE ALLOYS USING TRANSMISSION ELECTRON MICROSCOPY By J.C. Bennett READ ONLINE water wall tube by laser cladding technology in the present
More informationELECTRICAL CONTACTS FUNDAMENTALS, APPLICATIONS AND TECHNOLOGY. MlLENKO BRAUNOVIC MB Interface, Scientific Consultants Montreal, Quebec, Canada
ELECTRICAL CONTACTS FUNDAMENTALS, APPLICATIONS AND TECHNOLOGY MlLENKO BRAUNOVIC MB Interface, Scientific Consultants Montreal, Quebec, Canada VALERY V. KONCHITS National Academy of Sciences of Belarus
More informationLaser Processing on Graphite
Laser Processing on Graphite MSE 503 Seminar - Fall 2009 08-27-2009 CLA Conference Room, UT Space Institute, Tullahoma, TN - 37388, USA Deepak Rajput Graduate Research Assistant Center for Laser Applications
More informationManufacturing Technologies University of Rome Tor Vergata
Manufacturing Tech (6 cr) + Metallurgy (3 cr) Initial introduction (1 week) Timetable 6 credits (54-60 h) End of the course: 28 giugno Type of examination Written test Oral test (mandatory) Average of
More informationAERO 214. Introduction to Aerospace Mechanics of Materials. Lecture 2
AERO 214 Introduction to Aerospace Mechanics of Materials Lecture 2 Materials for Aerospace Structures Aluminum Titanium Composites: Ceramic Fiber-Reinforced Polymer Matrix Composites High Temperature
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationEffect of Ageing on the Tribological Behavior of Inconel 690 Using Taguchi s Method
American Journal of Materials Science 2016, 6(4A): 25-30 DOI: 10.5923/c.materials.201601.05 Effect of Ageing on the Tribological Behavior of Inconel 690 Using Taguchi s Method Joel Immanuel Concessao 1,*,
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationStructure-phase transformation in electrochemical boron containing coatings by thermal treatment
published at the WTK 2005, Chemnitz, D, September 29 th - 30 th 2005 Structure-phase transformation in electrochemical boron containing coatings by thermal treatment Vasyl Pokhmurskii, Roman Mardarevych
More informationExtending Valve Life: The Art of Heat Treating and Ceramic Coatings
Extending Valve Life: The Art of Heat Treating and Ceramic Coatings By Chris Johnson & Kevin Tackett Bodycote Presented at the Today s Valve Industry Today s industrial valve industry within the oil &
More informationCHAPTER 2: LITERATURE SURVEY
7 CHAPTER 2: LITERATURE SURVEY 2.1. Introduction The powder metallurgy processing is one of the oldest and economic routes for producing critical and complex shaped products [1-3]. P/M is one of the most
More informationEXPERIMENTAL RESEARCH CONCERNING A NEW METHOD TO PRODUCE ALUMINUM ALLOY-GRAPHITE PARTICLE COMPOSITE IN SUPERFICIAL LAYERS
U.P.B. Sci. Bull., Series B, Vol. 79, Iss. 1, 2017 ISSN 1454-2331 EXPERIMENTAL RESEARCH CONCERNING A NEW METHOD TO PRODUCE ALUMINUM ALLOY-GRAPHITE PARTICLE COMPOSITE IN SUPERFICIAL LAYERS Hazim F. AL-DULAIMI
More informationStainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationStudies on Requirements For Materials Used In Friction Couplings
Studies on Requirements For Materials Used In Friction Couplings Ilie BUTNARIU 1, Nicolae CONSTANTIN 2, Cristian DOBRESCU 3 1,2,3 Department of Ferrous Metallurgy, Materials Science and Engineering Faculty,
More informationTribology of Journal Bearings Subjected to Boundary and Mixed Lubrication
Mechanics of Contact and Lubrication ME5656 Department of Mechanical & Industrial Engineering Northeastern University Fall 2011 Tribology of Journal Bearings Subjected to Boundary and Mixed Lubrication
More informationFundamentals of Machine Component Design
FOURTH E D I T I O N Fundamentals of Machine Component Design ROBERT C. JUVINALL Professor of Mechanical Engineering University of Michigan KURT M. MARSHEK Professor of Mechanical Engineering University
More informationBeechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform
Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:
More informationINFLUENCE OF COATING WITH NANO PARTICLES ON FATIGUE PROPERTIES OF PLAIN LOW CARBON STEEL BEAM
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 9, September 2018, pp. 77 89, Article ID: IJMET_09_09_010 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=9
More informationChapter 6: Mechanical Properties
Chapter 6: Mechanical Properties ISSUES TO ADDRESS... Stress and strain: What are they and why are they used instead of load and deformation? Elastic behavior: When loads are small, how much deformation
More informationFinal Examination. Instructions. Guidelines. UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering
UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering Spring Semester 2006 Professor R. Gronsky MSE 121 Name (Please Print) Final Examination Instructions Please
More informationfamily of stainless steels can be divided into five (5) categories:
Welcome to the fifth issue of Tech Talk. This newsletter covers a range of topics on various welding products, applications, metallurgy, techniques, and economics. Previous issues are archived at www.unibraze.com.
More informationSteel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Recap Eutectic phase diagram Eutectic phase diagram Eutectic isotherm Invariant point Eutectic Reaction Compositions of components
More information3D METALS Discover the variety of Metal Powders The range of our standard metal powders
3D METALS Discover the variety of Metal Powders The range of our standard metal powders Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in
More informationEnergy and Packing. Materials and Packing
Energy and Packing Non dense, random packing Energy typical neighbor bond length typical neighbor bond energy r Dense, regular packing Energy typical neighbor bond length typical neighbor bond energy r
More informationChapter 8: Mechanical Properties of Metals. Elastic Deformation
Chapter 8: Mechanical Properties of Metals ISSUES TO ADDRESS... Stress and strain: What are they and why are they used instead of load and deformation? Elastic behavior: When loads are small, how much
More information