DEMOLITION AND REMOVALS THE EXISTING FACILITY WILL BE OCCUPIED AND IN OPERATION DURING THE PERFORMANCE OF THE WORK.

Size: px

Start display at page:

Download "DEMOLITION AND REMOVALS THE EXISTING FACILITY WILL BE OCCUPIED AND IN OPERATION DURING THE PERFORMANCE OF THE WORK."

Shauna Gregory
6 years ago
Views:

WE REPLACEMENT, RELOCATION OR MODIFICATION OF EXITING EQUIPMENT I INDICATED, PROVIDE AND MAINTAIN ALL TEMPORARY FEED, CONNECTION, CIRCUIT PROTECTION, AND ANY OT MATIAL AND APPURTENANCE REQUIRED TO

1 TE EXITING FACILITY WILL BE OCCUPIED AND IN OPATION DURING TE PFORMANCE OF TE WORK.. WEN NECEARY TO TEMPORARILY DICONNECT ANY EXITING FEED OR BRANC CIRCUIT UPPLYING OCCUPIED FACILITIE, CONF WIT TE OWN, AND CEDULE A MUTUALLY AGREEABLE PIOD OF INTRUPTION. 3. WE REPLACEMENT, RELOCATION OR MODIFICATION OF EXITING EQUIPMENT I INDICATED, PROVIDE AND MAINTAIN ALL TEMPORARY FEED, CONNECTION, CIRCUIT PROTECTION, AND ANY OT MATIAL AND APPURTENANCE REQUIRED TO MAINTAIN VICE TO OCCUPIED AREA. 4. NO WORK ALL BE LEFT INCOMPLETE, NOR ANY AZARDOU ITUATION CREATED, WIC WILL AFFECT TE LIFE OR AFETY OF TE PUBLIC AND/OR BUILDING OCCUPANT. AT NO TIME ALL TE WORK INTFE WIT OR CUT OFF ANY OF TE EXITING VICE WITOUT TE OWN' PRIOR WRITTEN PMIION. 5. TE OWN REVE TE RIGT TO OPATE ALL EXITING ELECTRICAL AND MECANICAL EQUIPMENT NOT INCLUDED IN TI WORK, AND TO PFORM ALL REQUIRED VICING AND REPAIR TO AME, AT ALL TIME. 6. IT I REQUIRED TAT TE WORK INDICATED AND/OR PECIFIED ALL BE CARRIED OUT WIT A MINIMUM OF INTFENCE TO TE ETABLIED OPATION OF TE BUILDING. 7. REMOVE, ABANDON, ROUTE, OR RELOCATE ANY CONDUIT, WIRING, LIGTING FIXTURE, OUTLET, AND OT ELECTRICAL ITEM, WIC ARE LAID BARE IN TE COURE OF, OR INTFE WIT, TE ALTATION. REMOVE ALL EXPOED OUTLET, CONDUIT, AND BRANC CIRCUIT WORK, WIC INTFE WIT TE ALTATION. F 8. IT I TE INTENTION OF TEE PECIFICATION TO PROVIDE FOR TE CONTINUANCE OF ALL ELECTRICAL VICE PREENTLY INTALLED IN TE UNALTED AREA. PROVIDE ALL CONDUIT, WIRING, AND DEVICE NECEARY TO MAINTAIN VICE TO TEE AREA. 9. COMPARE TE PLAN WIT TE EXITING CONDITION TO DETMINE TE AMOUNT OF WORK AFFECTED. REMOVE ALL UNUED EXPOED CIRCUIT WORK, OUTLET, FIXTURE AND TE LIKE NOT REQUIRED BY TE ALTATION. 0. ALL MATIAL REQUIRED TO BE REMOVED AND NOT REINTALLED UND TI DIVIION OF TE WORK, UNLE OTWIE INDICATED, ALL BECOME TE PROPTY OF TE CONTRACTOR, AND ALL BE REMOVED FROM TE ITE.. WE FEED AND BRANC CIRCUIT OR DEVICE AND EQUIPMENT ARE INDICATED TO BE REMOVED, CONDUCTOR AND CABLE ALL BE COMPLETELY REMOVED BACK TO TEIR OURCE. EXPOED OR ACCEIBLE CONDUIT ALL BE REMOVED COMPLETELY; CONDUIT EMBEDDED IN CONCRETE OR MAONRY ALL BE CUT OFF FLU AND TE URFACE PATCED MOOT AND LEVEL.. REMOVED MATIAL ALL BE DIPOED OF UING LICENED CARTING VICE. 3. AZARDOU MATIAL - CONTAINING PCB' (BALLAT), AND TE LIKE ALL BE DIPOED OF BY AN EPA APPROVED, LICENED DIPOAL VICE. CONTRACTOR ALL OBTAIN AND AVE ON FILE, AFFIDAVIT, AND RECEIPT TATING OW AND WE TE WATE WA DIPOED OF OR CONVTED WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: CONTRACTOR ALL REMOVE ALL ELECTRICAL EQUIPMENT IN OR ON WALL TAT ARE TO BE REMOVED - MAINTAIN CONTINUITY OF ALL EXITING BRANC CIRCUITRY TO EXITING ROOM NOT BEING RENOVATED. REWIRE ALL EXITING BRANC CIRCUIT (TAT ARE TO REMAIN) A REQUIRED. REF TO ARCITECTURAL DEMOLITION DRAWING FOR WALL BEING REMOVED - REF TO CONTRUCTION CEDULE FOR TIME DELAY. 45 UGUENOT TREET NEW ROCELLE, NY 080 T: X CONDUIT IN EXITING OR NEW CEILING TAT I NOT INTENDED FOR REUE ALL BE REMOVED BACK TO TE PANEL FROM WIC IT ORIGINATE. 370 BROADWAY NEW YORK, NY 008 T: F: CONDUCTOR TAT ARE NOT DEEMED REUABLE ALL BE REMOVED BACK TO TE NEARET JUNCTION BOX. WE TE ENTIRE CIRCUIT I TO BE REMOVED, TE CONDUCTOR ALL BE REMOVED BACK TO TE PANELBOARD FROM WIC TEY ORIGINATE. 7. OUTAGE OF EXITING ELECTRICAL (LIGTING, POW, AND IGNAL) YTEM NECEITATED BY WORK OF ALL TRADE ALL BE IN ACCORDANCE WIT FIELD CEDULE BY TE GENAL CONTRACTOR AND OWN - INCLUDE ALL ELECTRIC WORK OVTIME AND UPVIION TO COMPLY - CONTRACTOR ALL OBTAIN OWN' GENAL CONTRACTOR' APPROVAL PRIOR TO DIRUPTING EXITING ELECTRICAL YTEM. 8. CONTRACTOR TO MAINTAIN CONTINUITY AND ACCEIBILITY OF ALL EXITING YTEM AND YTEM EQUIPMENT FEED WIC MAY BE DIRUPTED FOR WORK OF ANY TRADE. 9. CONTRACTOR TO MAINTAIN CONTINUITY AND ACCEIBILITY OF ALL EXITING ELECTRICAL (POW, LIGTING, AND IGNAL) YTEM, EQUIPMENT FEED AND BRANC CIRCUIT ON FLOOR OR AREA TAT ARE NOT AFFECTED BY DEMOLITION OR NEW CONTRUCTION - REF TO CONTRUCTION CEDULE FOR ADDITIONAL INFORMATION. 0. ANY EXITING ELECTRICAL WORK WIC I PULLED OUT OR CUT AWAY ALL BE REMOVED FROM TE ITE A DIRECTED BY TE GENAL CONTRACTOR AND TE OWN.. -WING nd FLOOR DEMOLITION AND REMOVAL DANBURY, CT 0680 T: F: EXITING ELECTRICAL EQUIPMENT WIC I NOT TO BE REUED ALL BE REMOVED FROM DRYWALL PARTITION. ANY OPENING IN EXITING PARTITION LEFT BY REMOVAL OF EXITING ELECTRICAL EQUIPMENT ALL BE PATCED BY TI CONTRACTOR WIT MATIAL TO MATC EXITING.. FOR PURPOE OF TE CONTRACT, WA`T I NOTED OR OWN ON DRAWING INDICATE TE COPE OF WORK REQUIRED AND QUALITY OF MATIAL REQUIRED. 3. CONTRACTOR TO EXAMINE ALL CONTRACT DOCUMENT AND PFORM ALL DEMOLITION BOT FOR AREA BEING RENOVATED AND FOR AREA WIC MUT BE REWORKED TO PMIT TE INTALLATION OF WORK BY TE VARIOU TRADE. 4. CONTRACTOR ALL VIIT TE ITE AND VIFY TE EXTENT OF DEMOLITION AND REMOVAL PRIOR TO TE UBMIION OF BID. NO CONIDATION ALL BE GIVEN FOR FAILURE TO VIIT TE ITE. 5. CONTRACTOR ALL UTILIZE ALL TE BREAK IN TE EXITING PANEL TAT BECOME AVAILABLE WEN BRANC CIRCUIT AOCIATED WIT TEM ARE DICONNECTED AND REMOVED DUE TO DEMOLITION OF TE ELECTRICAL WORK. LIGT FIXTURE NOTE LIGTING FIXTURE CEDULE IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 COV EET ELECTRICAL CALE: NONE E-0

2 PP DEMOLITION KEY NOTE -WING nd FLOOR ETBR PP ETBR PP 4 WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: UGUENOT TREET NEW ROCELLE, NY 080 T: X 370 BROADWAY NEW YORK, NY 008 T: F: DANBURY, CT 0680 T: F: IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 ED- DEMOLITION FLOOR PLAN CALE: /4" = '-0" DEMOLITION PLAN - ELECTRICAL CALE: /4" = '-0" ED-

3 DEMOLITION KEY NOTE -WING nd FLOOR REF TO ARCITECTURAL DRAWING FOR EXACT EXTENT OF DEMOLITION WORK. DICONNECT AND REMOVE EXITING LIGT WITC FROM TE WALL. PATC TE WALL AFT LIGT WITC A BEEN REMOVED. DICONNECT LIGTING FIXTURE FROM EXITING LIGTING CIRCUIT IN TI ROOM. LIGTING FIXTURE ALL REMAIN FOR REUE. DICONNECT AND REMOVE WIRING CONNECTION AT DIMM WITCE. EXITING CONDUCTOR AND CONDUIT ALL REMAIN FOR REUE. EXTEND TO NEW LOCATION. 4 WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: UGUENOT TREET NEW ROCELLE, NY 080 T: X 370 BROADWAY NEW YORK, NY 008 T: F: DANBURY, CT 0680 T: F: IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 ED- DEMOLITION FLOOR PLAN CALE: /4" = '-0" DEMOLITION PLAN - LIGTING CALE: /4" = '-0" ED-

4 KEY NOTE PROVIDE NEW RECEPTACLE AT LOCATION OWN. WIRE NEW RECEPTACLE TO EXITING 0A-P PARE CIRCUIT BREAK IN POW PANEL 'PPB'. REF TO PANEL CEDULE ON DRAWING E-3 FOR PANELBOARD DIRECTORY. -WING nd FLOOR ETBR PROVIDE () 3/4"C FROM TEAC' DEK TO CEILING PROJECTOR LOCATION. PROVIDE () 3/4"C FROM TEAC' DEK TO PEAK LOCATION. COORDINATE IN FIELD. 4 WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: UGUENOT TREET NEW ROCELLE, NY 080 T: X PP 370 BROADWAY NEW YORK, NY 008 T: F: PP DANBURY, CT 0680 T: F: IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 E- FLOOR PLAN CALE: /4" = '-0" FLOOR PLAN - ELECTRICAL CALE: /4" = '-0" E-

5 KEY NOTE EXITING TRACK LIGTING IN IOLATION AREA ALL BE CONTROLLED BY NEW DIMM WITC. -WING nd FLOOR EXITING TRACK LIGTING IN ROOM 08A ALL BE CONTROLLED FROM RELOCATED DIMM WITCE. PROVIDE NEW DUAL EAD EMGENCY BATTY PACK AND WIRE UNWITCED TO EXITING EMGENCY LIGTING CIRCUIT CURRENTLY VING ROOM 08A. PROVIDE "IN UE" FIXTURE AND WITC. CONNECT TO EXITING LIGTING CIRCUIT IN TI ROOM UTILIZING #+G-3/4"C. 4 WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: UGUENOT TREET NEW ROCELLE, NY 080 T: X 370 BROADWAY NEW YORK, NY 008 T: F: DANBURY, CT 0680 T: F: A IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 E- FLOOR PLAN CALE: /4" = '-0" FLOOR PLAN - LIGTING CALE: /4" = '-0" E-

6 E-3 TYPICAL DEVICE MOUNTING EIGT DETAIL NONE 0/08V, 3 PAE, 4 WIRE PPB () LOAD VED TRIP POLE -WING nd FLOOR E-3 VOICE/DATA/AV OUTLET INTALLATION DETAIL NONE 4 WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: UGUENOT TREET NEW ROCELLE, NY 080 T: X 370 BROADWAY NEW YORK, NY 008 T: F: DANBURY, CT 0680 T: F: WIRE & CONDUIT LOAD IN VOLT-AMPE ØA ØB ØC POLE TRIP WIRE & CONDUIT LOAD VED PARE #,#G CLG RECEPT. RM 08A 0 3 QUAD RECEPT. RM 0 #,#G 0 0 QUAD RECEPT. RM 0 URFACE MTD NEMA #,#G LOAD P PAE TOTAL = 0 0 #,#G RECEPT. RM 0,08A # # # #### 4 IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 CEDULE AND DETAIL - ELECTRICAL CALE: NONE E-3

7 -WING nd FLOOR 4 WET 9T TREET TOW, 7T FLOOR NEW YORK, NY 000 T: UGUENOT TREET NEW ROCELLE, NY 080 T: X 370 BROADWAY NEW YORK, NY 008 T: F: DANBURY, CT 0680 T: F: IUE: 7/9/04 REVIION - IUED FOR CONTRUCTION 9/3/04 REVIION - IUED FOR CONTRUCTION 0/03/04 PECIFICATION ELECTRICAL CALE: NONE E-4

E-00 POWER, LOW TENSION AND LIGHT SYMBOL SCHEDULE DRAWING LIST BUILDING SITE INFORMATION: DESIGN INTENT:

E-00 POWER, LOW TENSION AND LIGHT SYMBOL SCHEDULE DRAWING LIST BUILDING SITE INFORMATION: DESIGN INTENT: POWER, LOW TENION AND LIGHT YMBOL CHEDULE DRAWING LIT DUPLEX RECEPTACLE OUTLET DUPLEX G.F.C.I. RECEPTACLE OUTLET INGLE PHAE JUNCTION BOX DOUBLE OR THREE PHAE JUNCTION BOX - KEY PLAN, YMBOL CHEDULE AND