0.2 mm Pitch Back-Lock FPC Connector
|
|
- Jesse McBride
- 6 years ago
- Views:
Transcription
1 0.2 mm Pitch Back-Lock FPC Connector FFX2 Series OUTLINE FFX2 series is a FPC connector which is 0.2mm contact pitch and 0.95mm heiht. pplicable FPC is 0.12mm thickness and 0.4mm pitch conductors on both sides. By locatin 0.4mm pitch contacts on both upper and lower side, FPC space is reduced to an equivalent 0.2mm contact pitch. FETURE K's oriinal "double layer contact" desin enables to be 0.2mm pitch. K's cable lock mechanism provides positive retention o the FPC. Back-lock structure ensures retention rom inadvertent rom upward pullin o the FPC. Connectors delivered with the lock lever opened. Time savin or FPC insertin operation. Nickel barrier prevents solder wickin. Correspondin to hih-speed transmission. PPLICTIONS Mobile phone, other mobile devices SPECIFICTIONS Rated Voltae Rated Current ielectric Withstand Voltae Insulation Resistance Resistance 50V C(r.m.s.) 0.2 / 200V C(r.m.s.) / 1 minute 100 MΩ min. at 500V C 50m Ω max. MTERIL/FINISH Item Cable Lock Housin Lock Lever Material / Finish Copper lloy / u(flash) over Ni Platin LCP Resin (UL94V-0) / Black PPS Resin (UL94V-0) / Brown
2 FFX2- -R11L Series FFX2 2 Number o Reer to Table.1 on Pae 3 3 Position :ouble Layer 4 Style R:Riht nle 5 pplicable PCB Thickness 1:0.12± Platin 1:u (Flash) over Ni Platin 7 Lock Lever :Standard 8 Cable Lock L:with Cable Lock Note Please do not close a lock lever without insertin FPC. Otherwise, contact ap will become narrow and FPC insertion orce will be hiher. No.1 Cable Lock No.n/2 Cable Lock No.1 No.n/2 B C±0.07 ± ± (Lerver Open) 4.00 (Lever Close) (1.66) 0.43 (FPC position) X C 1.70 Cable Lock C 2
3 0.70±0.10 E± ±0.10 (0.10) 0.10±0.10 (0.07) (Check Mark) 0.12±0.02 The platin lead should be desined on either upper or lower side min. 0.62± ± ± ±0.20 In case o short strenth, please keep the copper oil. Check Mark 0.73±0.03 Pattern prohibited rea 2.00 min. Connector Location (0.15) 0.65±0.02 F± ±0.02 ±0.02 Matin Side ±0.02 C± ± ± ±0.03 Table.1 Number o Upper Side Lower Side B C E F FFX2-26 -R11L FFX2-58 -R11L
4 Packae Speciications Reel imensions Emboss Tape imensions Type Type ±H c 1.75 E±H F Min. G± (16.00) 4.00 E±H 1.75 F±0.10 G±0.30 Section c-c c d etail a d Section - etail e 2.05 T P T P B T P. C T P. etail a or e User direction o eed 400mm Min. Tailer 30 Pockets Min. Empty components pockets 4000 pockets Leader: 15 pockets Empty components pockets Use direction o eed FFX2-XX-R1XL ,000pcs. or FFX2-XX-R1XL 2.00±H Section d-d Section - Table. 2 Number o B C E F G H Enboss Tape Quantity FFX2-26 -R11L Type FFX2-58 -R11L Type pcs. / Reel 4
5 FFX2- -R11BL Series FFX2 2 Number o Reer to Table. 3 on Pae 7 3 Position :ouble Layer 4 Style R:Riht nle 5 pplicable PCB Thickness 1:0.12± Platin 1:u (Flash) over Ni Platin 7 Lock Lever B:Lon Lock 8 Cable Lock L:with Cable Lock Note Please do not close a lock lever without insertin FPC. Otherwise, contact ap will become narrow and FPC insertion orce will be hiher. No.1 Cable Lock No.n/2 Cable Lock No.1 No.n/2 B C±0.07 ± ± (Lever Closed) 4.00 (Lever Opened) (1.86) 0.43 (FPC position) X C 1.70 Cable Lock C 5
6 Upper Si e Lo er Si e 0.70±0.10 E± ±0.10 (0.10) 0.10±0.10 (0.07) (Check Mark) 0.12±0.02 The platin lead shoud be desined on either upper or lower side min. 0.62± ± ± ±0.20 In case o short storenth, please keep the copper oil. Check Mark Recommen e PCB Pattern Layo t 0.65±0.02 F± ± ±0.03 Patter prohibited rea 2.00 min. Connector location (0.15) ±0.02 Matin Side ±0.02 C± ± ± ±0.03 Table. 3 Number o Upper Side Lower Side B C E F FFX R11BL
7 Packae Speciications Reel imensions Emboss Tape imensions (16.00) E±H 1.75 F±0.10 G±0.30 Section - etail e 2.30 T P B T P. C T P. tail e User direction to eed 400mm Min. Tailer 30 Pockets Min. Empty components pockets 3000pockets Leader: 15 pockets Empty comonents pockets or FFX2-XX-R1XBL User direction to eed FFX2-XX-R1XBL ,000pcs. Type ±H Section - Table. 4 Number o B C E F G H Emboss Tape FFX R11BL Type 2 Quantity 3000pcs. / Reel 7
2.54mm Pitch Board to Cable Connector
2.54mm Pitch Board to Cable Connector FRC5 Series Conforming Standard MIL-DTL-8353 FETURE UL pproved (File No. E72124) Conform to MIL-DTL-8353 Polarizing key prevents from mis-mating. SPECIFICTIONS Rated
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION NARROW PITCH (0.4mm) CONNECTORS P4S SERIES Compliance with RoHS Directive http://www.mew.co.jp/ac/e/ FEATURES 1. Space saving Compared to the currently sold
More informationHirose Korea Board To Board Connector
Hirose Korea Board To Board Connector KN13-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products ---------------------------------
More informationHirose Korea Board To Board Connector
Hirose Korea Board To Board Connector BM30-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products --------------------------------
More informationNARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S
NARROW-PITCH CONNECTORS FOR BOAR-TO-BOAR CONNECTION NARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S Compliance with RoHS irective FEATURES 1. Bellows-type contacts Bellows-type contacts resist mating stress
More informationStandard Connectors. MD Series NEW
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationFeatures. FX22 Series NEW
NEW FX22 Series Floating range: ±.6mm Z X Fig.1 Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam
More informationLow Profile 0.5mm Pitch Connectors For FPC
Low Profile 0.5mm Pitch Connectors For FPC FH17 Series FH17 (on-board type) flip-lock mechanism Features 1. Low profile 0.5mm pitch FPC connectors As products become lighter/thinner/shorter/smaller, requests
More information4.5 mm pitch, Horizontal Mating 2-Piece System Connectors
NW 4.5 mm pitch, Horizontal Mating 2-Piece System Connectors D64 Series (UL pending) The floating structure of the BTB connection provides increased flexibility by absorbing the movement of the PCB s.
More information0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector
0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector FH55/FH55M Series Dimensions: 40 pos Features 1. High-Speed Transmission(5 + Gbps) FPC Connector Capable of transmitting
More information10 + Gbps 0.5mm pitch Stacking Connectors
1 + Gbps.5mm pitch Stacking onnectors XG1 Series 1.3 1.1 Mechanical Features.5mm Pitch / ouble-row SMT Stacking Height : 15~23mm ( 2 pieces ) 25~44mm ( 3 pieces ) Number of ontacts : / / 14 / 1 / 156 /
More informationSubstrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source DF57 Series Swing-Lock Structure explanatory drawing Before mating Lock portion Features 1.Reinforced lock structure with swing
More information0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
More informationFeatures. FX22 Series
FX22 Series Floating range: ±.6mm Z X Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam contact
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Plug - Shielded 101 Series
Boardmount Through-Hole Right ngle Plug - Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction Screw or ground lock PCB retention Normal and
More informationCard Edge Type Ribbon Cable Connector
Card Edge Type Ribbon Cable Connector HIF5 Series pplications Computers, FDD, various kinds of electronic equipment. Features 1. Product Variation The area to install the connector body is classified into
More informationCard Edge Type Ribbon Cable Connectors
Card Edge Type Ribbon Cable Connectors HIF5 Series Product Specifications Rating 1. Insulation Resistance 1000M min. 2. Withstanding voltage No flashover or insulation breakdown. 3. Contact Resistance
More information0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
More informationDISCONTINUED 10/20/2011
Physical Electrical Environmental Insulation Material: Glass filled LCP Flammability: UL 94V-0 Color: White Material: Copper Alloy Plating Underplating: Nickel Wiping Area: 2 μ [ 0.05 μm ] min. Gold over
More information3M Pak 10 Media Plug 1 mm Right Angle, Surfacemount, With Pwr. Gnd. Option PK10M Series
1 mm pitch connector system Four mating heights available Available power contacts rated at 5A Available frame ground connection through surfacemount retention clips Keyed design helps prevent mating misalignment
More informationTECHNICAL DATA SHEET 1 / 7 MATERIALS BERYLLIUM COPPER BERYLLIUM COPPER BERYLLIUM COPPER POLYETHER ETHERCETONE 30% GF
.. pn ao TECHNICAL DATA SHEET 1 / 7 All dimensions are in mm. COMPONENTS BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS MATERIALS BERYLLIUM COPPER BERYLLIUM COPPER BERYLLIUM COPPER POLYETHER
More information0.35mm Pitch 0.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board
NEW.35mm Pitch.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board BM24 Series Conventional type (P=.35 mm, 2 contacts) Features 1 Rated current : 5A The compact BM24 Series features
More information3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information3M Pak 10 Boardmount Plug 1 mm Right Angle, Through-Hole PK10M Series
Pak 10 Boardmount Plug 1 mm pitch connector system Four mating heights available Available power contacts rated at 5A Available frame ground connection through surfacemount retention clips Keyed design
More information3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
More information0.5mm Pitch SMT Board to Board Connector
The product information in this catalog is for reference only. Please request the ngineering rawing for the most current and accurate design information. ll non- products have been discontinued, or will
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series Receptacle (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More informationR Series : IMP SMT BOARD TO BOARD ADAPTATOR H3 REEL OF 600 TECHNICAL DATA SHEET 1 / 7 COMPONENTS MATERIALS.
.. pn ao TECHNICAL DATA SHEET 1 / 7 All dimensions are in mm. COMPONENTS BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS MATERIALS BERYLLIUM COPPER BERYLLIUM COPPER BERYLLIUM COPPER POLYETHER
More informationDISCONTINUED. 3M PC Card Header Single Slot, No Ejector. Physical. Electrical. Environmental. UL File No.: E68080
M PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Solder retention clips option for secure hold-down Stand-off height options ESD
More informationSMB. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
SMB Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
More informationContacts for Full Duplex Ethernet Link
8D Series Twinax & Quadrax Contacts Contacts for Full Duplex Ethernet Link Twinax and Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments.
More informationORDERING INFORMATION: P/N K S 5 E U x CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) P111
CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) Insulation Resistance: 500M ohms (min.) Contact Resistance: 20m ohms (max.) Current Rating: 1.5 Amps. DC Resistance: 0.1 ohm (max.) Withstanding Voltage:
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Surface mount compatible PCT insulator
More information3M 4-Wall Header Low Profile, SMT Straight, Straight and Right Angle Thru Hole2500 Series
M 4-Wall Header.100.100 Low Profile, SMT Straight, Straight and Right ngle Thru Hole2500 Series Low profile, space saving design Center slot polarization prevents mis-insertions and reduces insertion time
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM RLC10, 16, 20, 32, 35, 50, 63. AEC-Q200 qualified
No.: RLC-K-HTS-0001 /17 Date: 2017. 4. 21 Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM Style: RLC10, 16, 20, 32, 35, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Thru-Hole Right Angle Receptacle-Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Boardmount Thru-Hole Right ngle Receptacle-Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction SMT
More informationDISCONTINUED. 3M PC Card Header Dual Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See
More information3M MetPak 2-FB Socket
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Molded guide fingers provide integrated alignment Alignment wafer for true position Mates with MP2-P inverse
More information3M MetPak 2-FB Socket 2 mm 4/5-Row, Solder Tail or Press-Fit With Tail Cover, Right Angle MP2 Series
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Expanded pin counts Protective Push-Cap Monoblockable Press or heat stake peg 12 mm modular units Meets global
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.4.4 No.RLC-K-HTS-0001-15 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND LOW OHM Style: RLC10, 16, 20, 32, 35, 50,
More information1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
More information3M CF Card Header CompactFlash Type I, Surface Mount
CF Card Header Meets CF standards Single row solder tails with 0.635 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.mconnectors.com
More information0.5mm Pitch SMT Board to Board Connector
.5mm Pitch SMT oard to oard onnector DF16 Series orrespond to Automatic Mounting The vacuum pick-up area is prepared for automatic mounting machine. Features 1. Miniaturizing and Slimming In addition to.5mm
More information3M Link Connector.100" Boardmount, Straight and Right Angle 382 Series
3M Link Connector.100" Boardmount, Straight and Right Angle 382 Series Mates with 3M Wiremount Link Connector 38104 Vertical or right angle configuration Accepts latch mechanism of Wiremount Link Connector
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Four-Wall Header Low Profile, SMT Straight, Straight and Rt ngle Through-Hole
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. .100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with
More informationSSL Series 1.2 IP X8 waterproof solution. Product Data Sheet. REV. 0, 2014 August
SSL Series 1.2 IP X8 waterproof solution Product Data Sheet REV. 0, 2014 August General Specification Number of Positions Current Rating Wire Information Voltage Rating Dielectric Withstand Voltage Durability
More informationConductive Paste-Based Interconnection Technology for High Performance Probe Card
Conductive Paste-Based Interconnection Technology for High Performance Probe Card Sang-il Kwon Eddy Kang TSE Co., Ltd. Overview Introduction of TABP Technology Key Technology of Core to Core Interconnection
More information3M HDC Header. Physical. Electrical. Environmental Vertical Mount, PCB/Backplane, Solder Tail or Press-Fit HDC Series
M HDC Header High density, up to 240 contacts single bay Early Mate Late Break (EMLB) grounding contacts for hot swapping Mates with three-row and four-row sockets RoHS* compliant. See the Regulatory Information
More information2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to 3.2mm x 6.4mm size 2W, fixed metal foil with ceramic carrier current sensing resistors used
More information3M Three-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Three-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 or N518 polarizing key) and center bump polarization Low profile Optional ejector latches Mounting holes
More informationDatasheet RS Pro RS Series Thick Film Surface Mount Resistor 0603 Case 330Ω ±5% 0.1W ±200ppm/ C RS Stock No:
Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0603 Case 330Ω ±5% 0.1 ±200ppm/ C RS Stock No: 713-4129 Product Details RS Pro 0603 thick film surface mount resistor with ±5% tolerance, provides
More informationDISCONTINUED. 3M PC Card Header Single Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
3M PC Card Header Single Slot, Low Profile, Integrated Ejector MCH Series Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 7
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control
More informationSolutions for Electronic Specialty Markets (ESM)
M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets M Electronic Specialty Markets - New Product Releases
More information3M MetPak 2-FB Power Socket 2 mm 4/5-Row, Right Angle, Solder or Press-Fit Tail MP2 Series
6.50 Amps per contact End-to-end stackable Press or heat stake peg (solder tail) Futurebus+ compatible See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.m.com/ interconnects
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of PC board space Mates with boardmount and
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Series 0 Mighty Mouse Triple-Start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Three Shell Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front
More informationSpecification FOR. 12.7/22KV AL-CV/WS 12.7/22KV Aluminum Conductor XLPE Insulated Copper Wire Screened PVC Sheathed Power Cable.
Spec. No. GO 5821-4361Rev.2 Issued date : July 13, 2005 Revised 1 date : April 29, 2015 Revised 2 date : February 19, 2016 Specification FOR 12.7/22KV AL-CV/WS 12.7/22KV Aluminum Conductor XLPE Insulated
More informationPackage View X1-DFN X1-DFN1006-2
Mechanical Data Surface Mount Package Weight: 0.001 grams (Approximate) Max Soldering Temperature +260 C for 30 secs as per JEDEC J-STD-020 Case Material Molded Plastic, UL Flammability Rating 94V-0 Terminals:
More informationDimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: Serie mm Screwless SMT - WR-TBL
Dimensions: [mm] Recommended Land Pattern: [mm] 1,2 ±0,30 1 End 2,4 ±0,30 2,5 ±0,10 0,10 ±0,10 Pl ±0,15 L1 ±0,15 L2 ±0,15 0,30 ±0,10 9 ±0,30 0,25 ±0,10 5 ±0,30 r 0,15 r 0,15 2,7 ±0,30 6,3 ±0,30 1 End 2,6
More informationTAPE THICKNESS.003 (0,08) .050 (1,27) Pitch .016 (0,41) Unless otherwise specified, tolerances are ±0.008 (0,20) TAPE.002 (0,05) .
Surface Mount SERIES 97 Half-Pitch Half the Size of Standard Switches Available in,, 6, 8, and 0 Positions Low Profile Less Mass for Easy Vacuum Pick & Place APPLICATIS Used in any application where space
More information3M Mini D Ribbon (MDR) Connectors.050 Surfacemount Vertical Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors Wiper-on-wiper contact for reliable repetitive plugging Interface latch design for connection stability I 1284C Interface as a 6 contact connector Contacts: 20, 26 and
More information3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
More information3M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug
M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug 61 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support to solder joints and help
More information3M Four-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More information3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing
More informationContents B Description
Contents Description Page CONTACT TECHNOLOGY 1-12 General Technical Specifications 1 CLIPS 4 Printed Circuit Pins, Pin Connectors 5 Pin Receptacles, Sockets Contacts 8 DUAL-IN-LNE Sockets & PGA Sockets
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 oardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction
More informationMQEC. Metal Alloy Low Resistance Resistor Specifications. 1. Scope: 2. Product Features: 3. Product Applications: a. LR1206 series. b. LR2010 series.
1. Scope: 1.1 This specification is covered following products: a. LR1206 series. b. LR2010 series. c. LR2512 series. d. LR2725 series. e. LR2728 series. 2. Product Features: 2.1 Ideal for all types of
More informationPhysical. Electrical. Environmental
M MetPak 2-FB Inverse Header 2 mm 5-Row, Right Angle, Solder MP2 Series Three levels of early mate, late break (EMLB) sequencing or selective loading options Footprint compatible with standard Futurebus+
More information3M Pak Wall Header
M Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle, High Temp Option 000 Series S Military (with M s 518 polarizing key) and centerbump polarization S Optional ejector latches S Mounting
More informationPLCC Sockets Through Hole - M43 Series
Through Hole - M43 Series PART NUMBER LEGEND M43X-XX-XX NUMBER OF CONTACTS 20, 28, 32, 44, 52, 68, 84, 100 (-10 Style) 44, 52, 68, 84 (-11 Style) STYLE -10 Standard wall thickness, through hole -11 Thin
More informationAVX Specialty Catalog
AVX Specialty Catalog MOBO Connectors www.avx.com Version 16.4 Table of Contents BATTERY ORS........................................................... 2-35 Standard 2.5mm Pitch 9155-000.............................................
More informationSPECIFICATION FOR APPROVAL
PART NO.: XSFP-9710-2N3D230-04B Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Victor De Ting Liu CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY
More informationMQEC Metal Alloy Low Resistance Resistor Specifications LR4527/5W
1. Scope: 1.1 This specification is for LR4527 (5.0W) product only. 2. Product Features: 2.1 Proprietary processing technique produces extremely low Resistance values. 2.2 Ultra Low and stable T.C.R. (
More information3M 4-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing header to board RoHS* compliant Optional polarizing posts High temperature insulator
More information3M MetPak HSHM Press-Fit Header 2 mm Type B25, 125 Signal Contacts, 5 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 6 mated lines per linear
More information3M Interconnect Products
3M Interconnect Products Molded-On Cable Assembles www.ttiinc.com T h e NWeo rvl d e s r L e as d ihn g o Pr a t s s i vo e n & C So non el c ut o tr is po e cn i as l i s t 3M Molded-On Cable Assemblies
More informationFloating Stacking 0.5mm Pitch Board to Board Connector
Floating Stacking 0.5mm Pitch Board to Board Connector FX20 Series X direction Floating range : 0.6 to 0.8mm Y direction Floating range : 0.6mm Features 1. 0.5mm pitch 2. Connection type: Stacking 3. Number
More informationReference Only. Spec. No. JENF243E-0002Q-01 P1 / 8
Spec. No. JENF243E-0002Q-01 P1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE31PT 1E9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for Large
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More information3M Four-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M's 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More information3M Three-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Three-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M's 518 or N518 polarizing key) and center bump polarization Low profile Optional ejector latches Mounting holes
More informationRibbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationReference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification
Spec. No. JENF243E-0003Q-01 P 1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More informationDimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Top Contact WR-FPC
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 3,28 pl 3,28 0,50 0,30 1 End 1,20 0,2 ±0,05 0,50 ±0,15 1 End 3,00 L ±0,15 L1 ±0,10 Pl ±0,10 4,30 ±0,15 2,10 ±0,15 General tolerance ±0,05 2,70 Pl h
More informationDimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Horizontal Bottom Contact WR-FPC
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 pl ±0,15 3,28 0,50 0,30 1,20 1 End 1 End 0,20 ±0,05 0,50 ±0,15 3,00 L ±0,15 2,10 ±0,15 2,70 General tolerance ±0,05 Pl h 0,13 Pl Pl ±0,10 L1 ±0,10 0,80
More informationRecommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Vertical Type A WR-FPC
Dimensions: [mm] Recommended Land Pattern: [mm] 1,3 ±0.15 1 2 0,20 ±0.05 0,50 ±0.15 L ±0.15 Pl ±0.10 4,50 End Cap 2 ±0.15 3,4 ±0.15 Cap h 0.13 3,50 3,5 ±0.15 4,3 ±0.20 1,50 ±0,15 0,50 ±0,15 2 pl ±0,10
More informationsolutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
More informationPRODUCT SPECIFICATION FOR APPROVAL
Issue : 151XC14C08005 Date of Issue : October 27.2008 DIGI-KEY CORPORATION : New Changed PRODUCT SPECIFICATION FOR APPROVAL Product Description Product Part Number : Common Mode Noise Filter (RoHS) : EXC14CE900U
More informationDistinctive Characteristics
Distinctive Characteristics Power and logic level capabilities available to suit varying applications. Light Duty Miniature Toggles Series E High torque bushing prevents rotation and separation from metal
More informationRecommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Low Profile Top Contact, 1.
Dimensions: [mm] Recommended Land Pattern: [mm] 1,65 ±0,1 1,95 ±0,05 1 pl ±0,05 0,30 1 ±0,05 0,75 ±0,05 1 End 1 End 2 ±0,10 1 ±0,10 Pl ±0,10 0,20 ±0,05 1,30 ±0,1 L ±0,15 +0,10 L1-0,03 0,45 ±0,10 3,80 ±0,10
More informationRecommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Back Locking Dual Contact, 0.
Dimensions: [mm] Recommended Land Pattern: [mm] 1,20 ±0,05 pl ±0,05 0,50 ±0,05 0,30 ±0,05 0,80 ±0,05 1 End 0,50 ±0,05 1 End 0,80 ±0,05 3,30 ±0,05 L ±0,15 0,96 ±0,10 0,40 ±0,05 Pl ±0,10 +0,08 L2-0 L1 ±0,10
More informationDimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: WR-FPC SMT ZIF Horizontal Bottom Contact, 0.
Dimensions: [mm] Recommended Land Pattern: [mm] 0,96 pl ±0,15 3,28 0,50 0,30 1,20 1 End 1 End 0,20 ±0,05 0,50 ±0,15 3,00 L ±0,15 2,10 ±0,15 2,70 General tolerance ±0,05 Pl h 0,13 Pl Pl ±0,10 L1 ±0,10 0,80
More information