Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
|
|
- Franklin Dixon
- 6 years ago
- Views:
Transcription
1 Pressure Relief s 1900/P Series Consolidated Safety Relief
2
3 Table of Contents Conversion Table /P.2 Features & Benefi ts /P.3 Scope of Design /P.4 Materials 1900/P1 Series (Conventional) /P /P1 Series (Balanced Bellows) /P /P3 Series (Exposed Spring Design) /P.12 Optional material - Stainless /P.13 Accessories Cap and Lever Options /P.14 Cap Options /P.15 Dimensions & Weights /P.16 Pressure/ Temperature Limits /P.22 Capacities /P.36 Confi guration Code /P.39 How to Order a 1900/P Safety Relief /P /P Series Safety Relief 1900/P.1
4 Conversion Table All the USCS values are converted to Metric values using the following conversion factors: USCS Unit Conversion Factor Metric Unit in mm lb kg in cm 2 ft 3 /min m 3 /min gal/min L/min lb/hr kg/hr psig barg ft lb Nm F 5/9 ( F-32) C 1900/P.2 Dresser Consolidated
5 The Consolidated type 1900/P Safety Relief is designed to be highly adaptable in order to meet numerous application requirements. Features & Benefits Heavy duty construction provides low cost of ownership by providing longer valve service life, lower maintenance costs and easy valve conversions. Design flexibility and parts interchangeability accommodates process changes through easy conversion to a variety of designs. An optional bellows design is a cost effective solution which compensates for the effects of variable back pressure. A soft seat design allows to the valve to remain leak free at 95% of set pressure over 100 psig with a backup metal seat for additional safety. Standard in both P1 & P3 types, the patented Thermodisc TM Seat is designed for a high degree of seat tightness. Designed for ASME B & PVC, Section I organic fluids, flashing water and limited steam applications. (The P1 & P3 series designs are not for ASME B & PVC, Section I Boiler Drum, Superheater or Reheater applications.) API Standard INLET SIZES 1" (25.4 mm) through 8" (203.2 mm) INLET RATINGS ANSI Class 150 through 2500 OUTLET SIZES 2" (50.8 mm) through 10" (254 mm) OUTLET RATINGS ANSI Class 150 and 300 ORIFICE SIZES Fourteen sizes: D through T TEMPERATURE RANGE 90 F (32 C) to 850 F (454 C) MATERIALS Cast carbon steel body with stainless steel trim is standard. CERTIFICATION ASME B & PVC, Section I - Material (Steam Service) ASME B16.34 and ASME B16.5 API 520, 526 and 527 ISO 4126 NACE MR Standard Material Requirements Pressure Relief s specified within this catalog comply with API Standard 526 Fifth edition, When required for replacement, Consolidated 1900/P valves are also available with connections and dimensions in accordance with supplanted API Standard Third edition 1984 and prior editions. Product variations covered in subsequent pages are noted below: Product Variation Description 1900/P1 Conventional Design /P1 Balanced Bellows Design 1900/P3 Exposed Spring Design 1900/P Series Safety Relief 1900/P.3
6 Scope of Design The 1900/P Series Safety Relief s are for the following applications only: ASME B & PVC, Section I Steam and Flashing Water Applications and Organic Vapor Service The P1 and P3 Series designs are not for ASME B & PVC, Section I Boiler Drum, Superheater or Reheater Applications. 1900/P1 Series Conventional Design: An exclusive with CONSOLIDATED valves, the Eductor Tube removes pressure from the bonnet when the valve is open. D through T orifice sizes. The D & E orifice are restricted lift /P1 Series Balanced Bellows Design: Sealing off the guiding area and upper valve parts protects the internal parts above the bellows from exposure to the process fluid. The balanced bellows also cancels out the effects of variable or constant back pressure at the outlet side. D through T orifice sizes. The D & E orifice are restricted lift. 1900/P3 Series Exposed Spring Design: The spring in this design is exposed for atmospheric cooling. D through T orifice sizes. Standard in all three types, the Thermodisc Seat is designed for a high degree of seat tightness for steam service or organic fluid applications. 1900/P1 Series /P1 Series 1900/P3 Series 1900/P.4 Dresser Consolidated
7 Scope of Design (Contd.) Standard Connection - D Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - E Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - F Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - G Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class /P Series Safety Relief 1900/P.5
8 Scope of Design (Contd.) Standard Connection - H Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - J Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - K Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - L Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class /P.6 Dresser Consolidated
9 Scope of Design (Contd.) Standard Connection - M Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - N Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - P Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - Q Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - R Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class Standard Connection - T Orifice ASME Orifice Area in cm Inlet Outlet Size ANSI Std. Size ANSI Std. in. mm Class in. mm Class /P Series Safety Relief 1900/P.7
10 Materials SRV 1900/P1 Series (Conventional) 1900/P1 Series Safety Relief (Conventional) ASME B & PVC, Section I Organic Fluid, Steam & Flashing Water Applications, Flat Seat, High capacity, Stainless Trim D & E Orifice only Restricted Lift A A The D and E valves are restricted lift versions of the F orifice valve. The lift is restricted by a limit washer to provide the equivalent effective orifice area for a D or E orifice. This design is available with a balanced bellows configuration and is designed for back pressure applications. Note: For available Cap options see pages 1900/P.14 and 1900/P /P.8 Dresser Consolidated
11 Materials (Contd.) For Steam and Organic Fluids 1900/P1 Series (Conventional) Ref. No. SRV 1900/P1(Conventional) Nomenclature Material 1 1 Base ( ) ASME SA216 WCC CS ( ) ASME SA217 WC6 Alloy 1A Base Plug ( ) Carbon ( ) 316 Stainless 2 Nozzle 316 Stainless 3 Adjusting Ring 316 Stainless 4 Adjusting Ring Pin 316 Stainless 5 Adjusting Ring Pin Gasket Soft Iron 6 Disc (D - K Orifices) Inconel X-750 (L - T Orifices) 616 Stainless 7 Disc Holder 316 Stainless 8 Holder Ring 410 Stainless 9 Holder Ring Retainer Carbon - Nickel Plated 10 Guide Alloy C Guide Gasket Soft Iron 12 Bonnet ASME SA216 WCC CS 13 Bonnet Gasket Soft Iron 14 Base Stud ASME SA193 B7 Alloy 15 Stud Nut ASME SA194 2H Carbon 16 Spindle Spindle Stem 416 Stainless Spindle Head (D - K Orifices) Inconel X-750 (L - T Orifices) 410 Stainless 17 Spring Washer Carbon 18 Spring ( ) Alloy ( ) Tungsten or Inconel X Adjusting Screw 416 Stainless 20 Adjusting Screw Nut 416 Stainless Ref. No. SRV 1900/P1 (Conventional) Nomenclature Material 1 Packed Cap Assembly 21 Packed Cap Carbon 23 Cap Screw Carbon 25 Cap Gasket Soft Iron 26 Release Nut Carbon 27 Release Locknut Carbon 28 Lever Malleable Iron 29 Lifting Fork Malleable Iron 30 Lever Shaft 410/416 Stainless 31 Packing 316 Stainless 2 32 Packing Nut 410/416 Stainless Plain Cap Assembly 22 Plain Cap Malleable Iron 24 Cap Set Screw Carbon 26 Release Nut Carbon 27 Release Locknut Carbon 33 Top Lever Malleable Iron 33A Top Lever Pin Carbon 34 Drop Lever Malleable Iron 34A Drop Lever Pin Carbon Bolted Cap Assembly 35 Bolted Cap Carbon 23 Cap Screw Carbon 25 Cap Gasket Soft Iron Gag Assembly 38 Gag Bolt Carbon 39 Sealing Plug Carbon 40 Sealing Plug Gasket Soft Iron Screwed Cap Assembly 41 Screwed Cap Carbon 25 Cap Gasket Soft Iron Collar (Not Shown) 410 Stainless Retainer Ring (Not Shown) 302 Stainless 42 Eductor Tube 316 Stainless 43 Bonnet Plug Carbon 44 Limit Washer (D-2 & E-2) 316 Stainless Notes: /P1 series designs is not for ASME B & PVC Section I Boiler Drum, Superheater or Reheater applications. 2. with Flexible Graphite Filler (Spiral Wound). 1900/P Series Safety Relief 1900/P.9
12 Materials (Contd.) SRV /P1 Series (Balanced Bellows) /P1 Series Safety Relief (Balanced Bellows ) ASME B & PVC, Section I Organic Fluid, Steam & Flashing Water Applications., Flat Seat, High capacity, Stainless Trim with Backpressure Compensating Bellows. D & E Orifice only Restricted Lift A 34 33A The D and E valves are restricted lift versions of the F orifice valve. The lift is restricted by a limit washer to provide the equivalent effective orifice area for a D or E orifice. This design is available with a balanced bellows configuration and is designed for back pressure applications Note: For available Cap options see pages 1900/P.14 and 1900/P /P.10 Dresser Consolidated
13 Materials (Contd.) For Steam and Organic Fluids /P1 Series (Balanced Bellows) Ref. No. SRV /P1 Series (Balanced Bellows) Nomenclature Material 1 (P1 only) 1 Base ( ) ASME SA216 WCC CS ( ) ASME SA217 WC6 Alloy 1A Base Plug ( ) Carbon ( ) 316 Stainless 2 Nozzle 316 Stainless 3 Adjusting Ring 316 Stainless 4 Adjusting Ring Pin 316 Stainless 5 Adjusting Ring Pin Gasket Soft Iron 6 Disc (D - K Orifices) Inconel X-750 (L - T Orifices) 616 Stainless 7 Disc Holder 316 Stainless 8 Holder Ring 410 Stainless 9 Holder Ring Retainer Carbon - Nickel Plated 10 Guide Alloy C Guide Gasket Soft Iron 12 Bonnet ASME SA216 WCC CS 13 Bonnet Gasket Soft Iron 14 Base Stud ASME SA193 B7 Alloy 15 Stud Nut ASME SA194 2H Carbon 16 Spindle Spindle Stem 416 Stainless Spindle Head (D - K Orifices) Inconel X-750 (L - T Orifices) 410 Stainless 17 Spring Washer Carbon 18 Spring ( ) Alloy ( ) Tungsten or Inconel X Adjusting Screw 416 Stainless 20 Adjusting Screw Nut 416 Stainless Notes: /P1 series designs are not for ASME B & PVC Section I Boiler Drum, Superheater or Reheater applications. 2. with Flexible Graphite Filler (Spiral Wound). Ref. No. SRV /P1 Series (Balanced Bellows) Nomenclature Material 1 (P1 only) Packed Cap Assembly 21 Packed Cap Carbon 23 Cap Screw Carbon 25 Cap Gasket Soft Iron 26 Release Nut Carbon 27 Release Locknut Carbon 28 Lever Malleable Iron 29 Lifting Fork Malleable Iron 30 Lever Shaft 410/416 Stainless 31 Packing 316 Stainless 2 32 Packing Nut 410/416 Stainless Plain Cap Assembly 22 Plain Cap Malleable Iron 24 Cap Set Screw Carbon 26 Release Nut Carbon 27 Release Locknut Carbon 33 Top Lever Malleable Iron 33A Top Lever Pin Carbon 34 Drop Lever Malleable Iron 34A Drop Lever Pin Carbon Bolted Cap Assembly 35 Bolted Cap Carbon 23 Cap Screw Carbon 25 Cap Gasket Soft Iron Gag Assembly 38 Gag Bolt Carbon 39 Sealing Plug Carbon 40 Sealing Plug Gasket Soft Iron Screwed Cap Assembly 41 Screwed Cap Carbon 25 Cap Gasket Soft Iron Collar (Not Shown) 410 Stainless Retainer Ring (Not Shown) 302 Stainless 44 Limit Washer (D-2 & E-2) 316 Stainless 45 Bellows Inconel 625 Bellows Nut 316L Stainless Bellows Flange 316L Stainless 46 Bellows Gasket Soft Iron 47 Seal Plate 304L Stainless 1900/P Series Safety Relief 1900/P.11
14 Materials (Contd.) SRV 1900/P3 Series (Exposed Spring Design) 1900/P3 Series Safety Relief (Exposed Spring Design) ASME B & PVC, Section I Steam Generator Applications., Flat Seat, High capacity, Stainless Trim. D & E Orifice only Restricted Lift A 34 33A The D and E valves are restricted lift versions of the F orifice valve. The lift is restricted by a limit washer to provide the equivalent effective orifice area for a D or E orifice. Note: For available Cap options see pages 1900/P.14 and 1900/P Ref. No. SRV 1900/P3 Series (Conventional) Nomenclature Material (P3) 1&2 10 Guide Alloy C Bonnet (P3-Slotted) ASME SA216 WCC CS 13 Bonnet Gasket N/A 18 Spring Alloy 25 Cap Gasket N/A 25 Cap Gasket N/A 25 Cap Gasket N/A 42 Eductor Tube N/A Notes: 1. All other materials are same as 1900/P1 construction /P3 series designs is not for ASME B & PVC Section I Boiler Drum, Superheater or Reheater applications. 1900/P.12 Dresser Consolidated
15 Materials (Contd.) Optional Material - Stainless Stainless Material Variation Ref. No. Nomenclature Conventional Material (P1 & P3) 1 Base ( ) ASME SA351 CF8M St.St. ( ) ASME SA351 CF8M St.St. 1A Base Plug ( ) 316 Stainless ( ) 316 Stainless 2 Nozzle 316 Stainless 3 Adjusting Ring 316 Stainless 4 Adjusting Ring Pin 316 Stainless 5 Adjusting Ring Pin Gasket Monel 6 Disc (D - K Orifices) Inconel X-750 (L - T Orifices) 616 Stainless 7 Disc Holder 316 Stainless 8 Holder Ring 316 Stainless 9 Holder Ring Retainer PH 15-7 MO Stainless 10 Guide (P1) CF8M 316 SS Boronized (P3) 1 CF8M 316 SS Boronized 11 Guide Gasket Monel 12 Bonnet (P1) ASME SA351 CF8M St.St. (P3-Slotted) 1 ASME SA351 CF8M St.St. 13 Bonnet Gasket (P1 Only) Monel 14 Base Stud ASME SA194 B8M St.St. 15 Stud Nut ASME SA194 8M S.St. 16 Spindle Spindle Stem 316 Stainless Spindle Head (D - K Orifices) Inconel X-750 (L - T Orifices) Inconel X Spring Washer 316 Stainless 18 Spring ( ) Stainless ( ) Tungsten or Inconel X-750 (All P3) PH 19 Adjusting Screw 17-4 PH 20 Adjusting Screw Nut 316 Stainless Packed Cap Assembly 21 Packed Cap 316 Stainless 23 Cap Screw ASME SA193 B8M St.St. 25 Cap Gasket (P1 Only) B8M Stainless 26 Release Nut 316 Stainless 27 Release Locknut 316 Stainless 28 Lever Malleable Iron Stainless Material Variation Ref. No. Nomenclature Conventional Material (P1 & P3) 29 Lifting Fork 316 Stainless 30 Lever Shaft 316 Stainless 31 Packing 316 Stainless 2 32 Packing Nut 316 Stainless Plain Cap Assembly 22 Plain Cap Malleable Iron 24 Cap Set Screw 316 Stainless 26 Release Nut 316 Stainless 27 Release Locknut 316 Stainless 33 Top Lever Malleable Iron 33A Top Lever Pin 316 Stainless 34 Drop Lever Malleable Iron 34A Drop Lever Pin 316 Stainless Bolted Cap Assembly 35 Bolted Cap 316 Stainless 23 Cap Screw ASME SA193 B8M St.st. 25 Cap Gasket (P1 Only) Monel Gag Assembly 38 Gag Bolt Carbon 39 Sealing Plug 316 Stainless 40 Sealing Plug Gasket Monel Screwed Cap Assembly 41 Screwed Cap 316 Stainless 25 Cap Gasket (P1 Only) Monel Collar (Not Shown) 316 Stainless Retainer Ring (Not Shown) 302 Stainless 42 Eductor Tube (P1 Only) Stainless 43 Bonnet Plug Stainless 44 Limit Washer (D-2 & E-2) 316 Stainless Notes: 1. Not present in Bellows construction. All other materials are same for Bellows construction. 2. with Flexible Graphite Filler (Spiral Wound). Stainless Material Variation Ref. No. Nomenclature Bellows Material 1 (P1 only) 45 Bellows Inconel 625 Bellows Nut 316L Stainless Bellows Flange 316L Stainless 46 Bellows Gasket Monel 47 Seal Plate 316L Stainless Notes: 1. All other materials same as Stainless Conventional Material Construction (Only P1) 1900/P Series Safety Relief 1900/P.13
16 Accessories Cap and Lever Options Packed Lever - P1 Plain Lever - P1 & P A A Cap Selection Safety Application Screwed Cap 1 Bolted Cap 1 Packed Lever Plain Lever Gag 2 Steam Service 1900/P1 X X X Steam Service Steam Generator 1900/P3 X X Organic Fluid Vapor /P1 X X X Notes: 1. ASME B & PVC, Section I (Part PVG-12) requires the safety valve to be a totally enclosed type that is designed so that vapors escaping beyond the valve seat shall not discharge into atmosphere. Safety valves used to protect organic fluid vaporizers are not to be equipped with lifting levers. 2. All caps may be supplied with a gag. 1900/P.14 Dresser Consolidated
17 Accessories (Contd.) Cap Options Bolted Cap Organic Fluid Vaporizer Application Screwed Cap Organic Fluid Vaporizer Application Cap with Gag /P Series Safety Relief 1900/P.15
18 Dimensions & Weights This table applies to the standard 1900/P Series regardless of materials of construction. If the valve you are reviewing has an inlet or outlet size different from that stated, the dimensions (A) through (E) and weight may not apply. 1900/P1 Series 1900/P3 Series D C D C A ±.063 ± 1.6 mm A ±.063 ± 1.6 mm E E B ±.063 ± 1.6 mm B ±.063 ± 1.6 mm 1900/P.16 Dresser Consolidated
19 Dimensions & Weights (Contd.) Data - D Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - E Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg /P Series Safety Relief 1900/P.17
20 Dimensions & Weights (Contd.) Data - F Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - G Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg /P.18 Dresser Consolidated
21 Dimensions & Weights (Contd.) Data - H Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - J Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - K Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg /P Series Safety Relief 1900/P.19
22 Dimensions & Weights (Contd.) Data - L Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - M Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - N Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg /P.20 Dresser Consolidated
23 Dimensions & Weights (Contd.) Data - P Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - Q Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - R Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg Data - T Orifice A B C Conventional (P1 & P3) Bellows (P1) D E Approximate Weight in. mm in. mm in. mm in. mm in. mm in. mm lb kg /P Series Safety Relief 1900/P.21
24 Pressure and Temperature Selection Chart for Steam Service 1900 & P1 & P3 Series D Orifice Pressure Temperature Ratings for D Orifice API Ratings, D Orifice in 2 (0.710 cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905D D D D D D D D D D D D D 1922D 1924D 1926D 1928D INLET TEMPERATURE F Tungsten or Inconel Alloy D 1905D 1910D 1912D 1914D 1916D 1918D *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. P1/ P3* 1900/P.22 Dresser Consolidated
25 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series E Orifice Pressure Temperature Ratings for E Orifice API Ratings, E Orifice in 2 (1.265 cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905E E E E E E E E E E E E E 1922E 1924E 1926E 1928E INLET TEMPERATURE F Tungsten or Inconel Alloy E 1905E 1910E 1912E 1914E 1916E 1918E *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. P1/ P3* 1900/P Series Safety Relief 1900/P.23
26 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series F Orifice Pressure Temperature Ratings for F Orifice API Ratings, F Orifice in 2 (1.981 cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905F F F F F F F F F F F F F 1922F 1924F 1926F 1928F INLET TEMPERATURE F Tungsten or Inconel Alloy F 1905F 1910F 1912F 1914F 1916F 1918F *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. P1/ P3* 1900/P.24 Dresser Consolidated
27 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series G Orifice Pressure Temperature Ratings for G Orifice API Ratings, G Orifice in 2 (3.245 cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905G G G G G G G G G G G G G 1922G 1924G 1926G 1928G INLET TEMPERATURE F Tungsten or Inconel Alloy G 1906G 1910G 1912G 1914G 1916G 1918G P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P Series Safety Relief 1900/P.25
28 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series H Orifice Pressure Temperature Ratings for H Orifice API Ratings, H Orifice in 2 (5.065 cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905H H H H H H H H H H H 1922H 1924H 1926H INLET TEMPERATURE F Tungsten or Inconel Alloy H 1905H 1910H 1912H 1914H 1916H *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. P1/ P3* 1900/P.26 Dresser Consolidated
29 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series J Orifice Pressure Temperature Ratings for J Orifice API Ratings, J Orifice in 2 (8.303 cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905J J J J J J J J J J J 1922J 1924J 1926J INLET TEMPERATURE F Tungsten or Inconel Alloy J 1906J 1910J 1912J 1914J 1916J P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P Series Safety Relief 1900/P.27
30 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series K Orifice Pressure Temperature Ratings for K Orifice API Ratings, K Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905K K K K K K K K K K K 1922K 1924K 1926K INLET TEMPERATURE F Tungsten or Inconel Alloy K 1905K 1910K 1912K 1914K 1916K P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P.28 Dresser Consolidated
31 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series L Orifice Pressure Temperature Ratings for L Orifice API Ratings, L Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905L L L L L L L L L L L 1922L 1924L 1926L INLET TEMPERATURE F Tungsten or Inconel Alloy L 1906L 1910L 1912L 1914L 1916L P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P Series Safety Relief 1900/P.29
32 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series M Orifice Pressure Temperature Ratings for M Orifice API Ratings, M Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905M M M M M M M M M 1922M 1924M INLET TEMPERATURE F Tungsten or Inconel Alloy M 1905M 1910M 1912M 1914M P1/ P3* SET PRESSURE - lbs. per Sq. in. *P3 Alloy Spring - all temperature ratings 1900/P.30 Dresser Consolidated
33 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series N Orifice Pressure Temperature Ratings for N Orifice API Ratings, N Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905N N N N N N N N N 1922N 1924N INLET TEMPERATURE F Tungsten or Inconel Alloy N 1905N 1910N 1912N 1914N P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P Series Safety Relief 1900/P.31
34 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series P Orifice Pressure Temperature Ratings for P Orifice API Ratings, P Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905P P P P P P P P P 1922P 1924P INLET TEMPERATURE F Tungsten or Inconel Alloy P 1905P 1910P 1912P 1914P P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P.32 Dresser Consolidated
35 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series Q Orifice Pressure Temperature Ratings for Q Orifice API Ratings, Q Orifice in 2 ( cm 2 ) Standard Material of Construction Backpressure 100ºF (37.8ºC) Conventional (P1 and P3) Bellows (P1 Only) 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) psig barg psig barg psig barg psig barg psig barg psig barg 1905Q Q Q Q Q Q Q 1922Q INLET TEMPERATURE F Tungsten or Inconel Alloy Q or 1906Q 1906Q 1910Q 1912Q P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P Series Safety Relief 1900/P.33
36 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series R Orifice Pressure Temperature Ratings for R Orifice API Ratings, R Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional (P1 and P3) Bellows (P1 Only) 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) psig barg psig barg psig barg psig barg psig barg psig barg 1905R R R R R R R 1922R INLET TEMPERATURE F Tungsten or Inconel Alloy R or 1906R 1906R 1910R 1912R P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P.34 Dresser Consolidated
37 Pressure and Temperature (Contd.) Selection Chart for Steam Service 1900 & P1 & P3 Series T Orifice Pressure Temperature Ratings for T Orifice API Ratings, T Orifice in 2 ( cm 2 ) Backpressure 100ºF (37.8ºC) Standard Material of Construction Conventional Bellows 100ºF (37.8ºC) Saturated Steam 800ºF (426.7ºC) 850ºF (454.4ºC) (P1 and P3) (P1 Only) psig barg psig barg psig barg psig barg psig barg psig barg 1905T T T T T T T 1922T INLET TEMPERATURE F Tungsten or Inconel Alloy T or 1906T 1910T 1912T P1/ P3* *P3 Alloy Spring - all temperature ratings SET PRESSURE - lbs. per Sq. in. 1900/P Series Safety Relief 1900/P.35
38 Capacities Orifice Designation Orifice Area Set Pressure Capacity for ASME B&PV Code Section I, for Saturated Steam 1 Capacities Based on based at 10% overpressure or 3 psig (0.21 barg), whichever is greater, showing 90% of actual capacity in accordance with latest ASME Code requirements. D E F G H J K in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm Orifice Capacity psig barg lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr Notes: 1. Refer to page 1900P.38 for correction factor applied for superheated steam. 2. The following Napier factor is applied to the capacity of pressures greater than 1520 psig ( barg):.1906 x P psia x P psia /P.36 Dresser Consolidated
39 Capacities (Contd.) Orifice Designation Orifice Area Set Pressure Capacity for ASME B&PV Code Section I, for Saturated Steam 1 Capacities Based on based at 10% overpressure or 3 psig (0.21 barg), whichever is greater, showing 90% of actual capacity in accordance with latest ASME Code requirements. L M N P Q R T in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm 2 in 2 cm Orifice Capacity psig barg lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr lb/hr kg/hr Notes: 1. Refer to page 1900/P.38 for correction factor applied for superheated steam. 2. The following Napier factor is applied to the capacity of pressures greater than 1520 psig ( barg):.1906 x P psia x P psia /P Series Safety Relief 1900/P.37
40 Capacities (Contd.) Superheat Correction Factor 1&2 Total Temp. ( F ) Flowing Pressure 3 (psia) Superheat Correction Factor K sh Notes: 1. For capacity on superheated steam, multiply saturated steam capacity by correction factor. 2. Convert set pressure from (psig) to (psia) fl owing pressure. 3. psia fl owing = [set pressure psig x overpressure] /P.38 Dresser Consolidated
41 Configuration Code MATERIAL CLASS INTERCHANGEABILITY DEVIATION FROM STANDARD BONNET TYPE SEAT DESIGN ORIFICE LEVER/CAP DESIGN BELLOWS SELECTION INLET FACING PRESSURE CLASS SERVICE VALVE TYPE GUIDE SURFACE COATING D - P1-5 - CC - TD RF - SS E P3 S4 * 32 RJ DT G1 10 F SP 33 LM G2 12 G SPEC 34 SM G3 14 H 37 LF 16 J SF 18 K LT 20 L ST 22 M LG 24 N SG 26 P LJ 28 Q BW R GL T OC 1900/P Series Safety Relief 1900/P.39
42 Configuration Code (Contd.) Pressure Class Bellows Selection Interchangeability Designation Class Designation Range Designation Non Bellows 30 Bellows 5 Applies to all orifi ces Seat Design Designation TD Thermodisc Lever/Cap Design Designation 31 Screwed 32 Bolted 33 Packed 34 Plain 37 Air Operated Service Designation SS Steam Bonnet Designation Range P1 Closed Bonnet DT Dowtherm P3 Open Bonnet Guide Surface Coating Material Class Variations Designation Part Coated Designation Variation G1 Glide-Aloy Disc Holder CC Standard Material G2 G3 Glide-Aloy Guide Glide-Aloy Disc Holder and Guide S4 Stainless (Complete ) Standard Connection Orifice Area (API) Area (ASME) in 2 cm 2 in 2 cm 2 D E F G H J K L M N P Q Inlet Flange Facing Designation Facing RF Raised Face Serrated RJ Ring Joint LM Large Male SM Small Male LF Large Female SF Small Female LT Large Tongue ST Small Tongue LG Large Groove SG Small Groove LJ Lens Joint BW Butt Weld R T GL OC Grayloc Oteco 1900/P.40 Dresser Consolidated
43 How to Order a 1900/P Safety Relief Specification Sheet Page of Requisition No. Job No. Date Revised By General 1. Item Number: 2. Tag Number: 3. Service, Line or Equipment No: 4. Number Required: Basis of Selection 5. Code: ASME Sec. I OTHER Specify: 6. Comply with API 526: YES NO 7. Fire OTHER Specify: 8. Rupture Disk: YES NO Design 9. : Safety Relief 10. Design: Conventional Bellows Closed Bonnet Yoke/Open Bonnet Metal Seat Resilient Seat API 527 Seat Tightness OTHER Specify: Connections 11. Inlet Size: Rating: Facing: Outlet Size: Rating: Facing: 12. OTHER Specify: Materials 13. Body/Bonnet: 14. Guide/Rings: 15. Seat Material: Metal: Resilient: 16. Bellows: 17. Spring: 18. Comply with NACE MRO 175 YES NO 19. OTHER Specify: 20. Cap and Lever Selection Screwed Cap (Standard) Bolted Cap Plain Lever Packed Lever Gag 21. OTHER Specify: Service Conditions 22. Fluid and State: 23. Required Capacity per & Units: 24. Molecular Weight or Specific Gravity: 25. Viscosity at Flowing Temperature & Units: 26. Operating Pressure & Units: 27. Blowdown: Standard Other 28. Latent Heat of Vaporization & Units: 29. Operating Temperature & Units: 30. Relieving Temperature & Units: 31. Built-up Back Pressure & Units: 32. Superimposed Back Pressure & Units: 33. Cold differential Test Pressure & Units: 34. Allowable Overpressure in Percent or Units: 35. Compressibility Factor, Z: 36. Ratio of Specific Heats: Sizing and Selection 37. Calculated Orifice Area: in 2 cm Selected Orifice Area: in 2 cm Orifice Designation (letter): 40. Manufacturer: 41. Model Number: 42. Vendor Calculations Required: YES NO 1900/P Series Safety Relief 1900/P.41
44
1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
More informationConsolidated* 1900 Series Safety Relief Valve
GE Oil & Gas Technical Specifications Rev. D 12/2016 Consolidated* 1900 Series Safety Relief The highly adaptable 1900 Series Safety Relief is designed to meet numerous application requirements. GE Data
More informationConsolidated* 1900 Series
Technical Specifications Rev. H - 03/2018 Consolidated* 1900 Series Safety Relief The highly adaptable 1900 Series Safety Relief is designed to meet numerous application requirements. BHGE Data Classification
More information1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
More informationSAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
More informationTable of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
More informationMaterials Materials Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown.
19000 Materials Materials 15 6 9 10 14 7 8 5 7 3 2 4 1 19000-2 Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown. 19000.5 19000 (SRV-1/Q3.01) 19000
More informationTable of Contents Scope of Design
1 Scope of Design Table of Contents Scope of Design Table of Contents.............................................................. 1.1 Introduction..................................................................
More informationCROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
More informationConsolidated* Electromatic* Ball Valves
GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown
More informationConsolidated* /2/3 Series (1) Electromatic* Ball Valve System
Technical Specifications Rev. C - 09/2018 Consolidated* 3500-1/2/3 Series (1) Electromatic* Ball Valve System Provides automatic or manual overpressure startup for steam boiler systems and assists startup
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More information87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
More information88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
More informationCarbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
More informationMasoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
More information87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
More informationDuplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
More informationMaster Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
More information88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
More information88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationCAST STEEL SAFETY AND RELIEF VALVE CATALOG
CAST STEEL SAFETY AND RELIEF VALVE CATALOG www.walworthvalves.com INDEX Introduction walworth Company... 4 walworth Engineering control... 5 walworth quality system... 5 WALWORTH quality control equipment...
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More information87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More informationStainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
More information88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
More informationLow Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
More informationP600 Pressure Regulator
P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
More information87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
More informationANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
More informationPRESSURE RELIEF VALVE RAPID SHIPMENT PROGRAM RAPID SHIPMENT PRESSURE RELIEF VALVES
PRESSURE RELIEF VALVE RAPID SHIPMENT PROGRAM RAPID SHIPMENT PRESSURE RELIEF VALVES PRONTO RAPID SAFETY RELIEF VALVE ASSEMBLY AND DELIVERY PROGRAM Pronto is a unique initiative that gives you access to
More information88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
More information88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
More informationGlobe Valve. Regulating. Service
Globe Valve Regulating Service Globe Valves FM Globe Valves are used in applications requiring throttling and frequent operations. FM Parabolic, Vee-type regulating, Swivel and guided plug and stem, Soft
More informationFisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
More informationSection 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
More informationTable of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
More informationP630 HIGH FLOW GAS REGULATOR
P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
More informationSpecification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
More informationConsolidated* Pressure Relief Valves For Power Service
Consolidated* Pressure Relief Valves For Power Service Pressure relief solutions for the power industry Safety Relief Valves Safety Valves bhge.com 2 DESIGN AND PERFORMANCE THAT MEETS CUSTOMER NEEDS Safety,
More informationNELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion
More informationSEMPELL. High Pressure Steam Bypass Valves - Type 115 ASME.
SEMPELL Steam Turbine and Boiler protection at Steam Turbine trip. Steam Turbine bypass to Cold Reheat or Condenser while Boiler/Turbine start-up and shut-down. Features and Benefits Pressure reduction
More informationCompact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
More informationBSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
More informationFLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
More informationType 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
More informationVarec 2010B/2020B Pressure and Vacuum Relief Valves 2010B
Varec 0B/B The Varec 0B/B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction The Varec 0B and B and Relief
More informationCash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
More informationD1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
More informationIron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
More informationFasani Pressure Seal Cast gate Valves - Style B WEDGE GATE
A wide range of gate valves specifically designed for high pressure and high temperature applications. Features GENERAL APPLICATION Our pressure seal gate valves are recommended for a large variety of
More informationMDV SERIES 3 WAY BALL VALVES
MDV SERIES 3 WAY BALL VALVES Diverting ball valves for industrial and process applications. Design Pressure Rating 150# to 1500# Available in Sizes ½ to 12 2500# Available in Sizes ½ to 4 Valve Size 1/2
More informationCompact Trunnion Mounted Side Entry Ball Valves
Compact Trunnion Mounted Side Entry Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers
More informationProcess Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
More informationCarbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
More informationA. This Section includes the following general-duty valves: 1. Division 15 Section "Mechanical Identification" for valve tags and charts.
D-9 OUTLINE SPECIFICATION FOR HTHW VALVES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationKTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
More informationSV SERIES 2-PIECE V PORT CONTROL VALVES
SV SERIES 2-PIECE V PORT CONTROL VALVES Split Body metal seated control valves for industrial and process applications. Design Pressure Rating 150# Available in Sizes ½ to 12 300# Available in Sizes ½
More informationRosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
More informationCast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
More informationSuitable for use in a variety of fluid systems.
Suitable for use in a variety of fluid systems. General Description Pipeline Wye Strainers are in thousands of applications in chemical, petroleum, pulp and paper, and utilities, as well as numerous commercial
More informationMasoneilan * Series Control Valve
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves 2 GE Oil & Gas Table of Contents Introduction...3 Product Features...3
More informationM Series 3-PC High Performance Metal Seat Ball Valve
M Series 3-PC High Performance Metal Seat Ball Valve 1 M Series 3-PC High Performance Metal Seat Ball Valve Full Bore TH/SW/BW/Flanged Ends Class 600LB The A-T Controls M Series metal seat ball valve is
More informationModel 360 Control Valves
Features Sour Service Capability Available in standard configurations that comply with NACE MR0175/ISO 15156. Versatility A wide range of trim options including Low Noise and Anti- Cavitation make the
More informationM33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMECHANICAL LEVEL CONTROLS
FLANGED TRUNNION ASSEMBLY DUCTILE IRON APPLICATIONS: Used on oil and gas separators, freewater knockouts (FWKO), horizontal emulsion treaters and similar equipment where a float is desired to monitor fluid
More informationMDV SERIES THREE WAY BALL VALVES
MDV SERIES THREE WAY BALL VALVES 1/2 THRU 12 ANSI 150# THRU ANSI 2500# FULL PORT AND REDUCED PORT BLOW OUT PROOF STEM METAL AND SOFT SEATS The Jarecki MDV Series ball valves are available in a variety
More informationNEWCO. Cast Steel Valves. Technical Data TC9308-3
NEWCO Cast Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures
More informationFisher NotchFlo DST Control Valve
NotchFlo DST Valve Product Bulletin Fisher NotchFlo DST Control Valve Fisher NotchFlo DST control valves offer excellent control of liquid services with high pressure drops and entrained particulate. The
More informationSpecification Data CP /10. Putting You In Control Series. High Pressure Labyrinth Trim Control Valve
Putting You In Control Specification Data CP77000 04/10 77000 Series High Pressure Labyrinth Trim Control Valve Dresser Masoneilan 77000 Series High Pressure, Labyrinth Trim Control Valves 2 Dresser Masoneilan
More informationAnderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
More informationBaumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
More informationUL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
More informationCONA -Universal / CONA -Connector
CONA -Universal for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal / CONA -Connector CONA B-Universal Bimetallic steam trap (BR 604) BR 604 Page CONA M-Universal
More informationALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
More informationFisher A11 High-Performance Butterfly Valve, NPS 30-72
A11 Valve Product Bulletin Fisher A11 igh-performance Butterfly Valve, NPS 30-72 The Fisher A11 igh-performance Butterfly Valve maintains tight shutoff, and can be specified for a wide range of pressure
More informationCode. 1) Code. Standard or Specification. Bolting
Code 1. Code 1) Code (1) ASME B 31.1 : Power Piping (2) ASME B 31.3 : Process Piping (3) ASME B 31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 2) Material Code Bolting
More informationKTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
More informationClass 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
More informationBaumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
More information3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA FEATURES GENERAL APPLICATIONS
TECHNICAL DATA Nominal diameter: DN 50 - DN 1200 Metallically up to DN 800 max. PN 16 Face-to-face: EN 558 Series 20, optional Series 25 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092
More informationFLANGED END BALL VALVE
Specification: - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material providing maximum
More informationProduct data sheet Dynaxe - L162GD Valves High Performance - Double Excentric Dynaxe L162
DESIGN Body Flangeless wafer type (lugged) End Connection EN 1092 PN 25, 40 ASME B16.5 cl. 300 / B16.47 cl. 300 MSS SP 44 cl. 300 Face to Face EN558-1/2 Series 16 Disc Seat Replaceable Shaft Seal Design
More informationM Series Floating Metal Seat Ball Valve
M Series Floating Metal Valve 1 M Series Floating Metal Valve Full Bore Two-piece Flanged Ends ANSI 150/300/600LB The A-T Controls M Series metal seat ball valve is designed for use in severe services
More information83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
More informationFisher Vee-Ball V150, V200, and V300 Rotary Control Valves
Fisher Vee-Ball V150, V200, and V300 Rotary Control Valves This bulletin covers the DN 25 through 600 (NPS 1 through 24) V150, V200 and V300 Vee-Ball control valves. The Vee-Ball valve combines globe valve
More informationSoft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More information