MECHANICAL LEVEL CONTROLS
|
|
|
- Melissa Waters
- 5 years ago
- Views:
Transcription
1 FLANGED TRUNNION ASSEMBLY DUCTILE IRON APPLICATIONS: Used on oil and gas separators, freewater knockouts (FWKO), horizontal emulsion treaters and similar equipment where a float is desired to monitor fluid level. FEATURES: Teflon packed rotary stuffing box 303 Stainless steel shaft Removable, bonnet type trunnion assembly Stainless steel adjustable linkage 3/4" float arm hub ANSI 150 Flange PART NO. ITEM QTY. DESCRIPTION 6 INCH 8 INCH 10 INCH 1 1 COVER GASKET BOLT FLOAT ARM HUB TRUNNION PLUG SHAFT GASKET BONNET SPACER THRUST WASHER PACKING STUFFING BOX PACKING RING PACKING FOLLOWER STUFFING BOX NUT LEVER HUB LEVER BALL JOINT NUT WASHER NUT LINKAGE ROD TRUNNION ASSEMBLIES AVAILABLE: PART LINE MAX NO. SIZE MODEL NO. W.P. CCA 612 TO-D 250 CCB 8" 812 TO-D 250 CCC 10" 1012 TO-D 250 BOLT SETS AVAILABLE: NOTES: For standard & optional Seals, Metals, Cv values, Material specifications & Dimensions see Technical Data on pages C2:I - C2:V Max W.P. valves based on -20 F to 100 F. See page C2:V for temps above 100 F Longer Levers are available, 1, 20", 24",30" & 3. Specify 340 and length desired, example: 340L16. PART LINE NO. SIZE MODEL NO. YCA 6 INCH COVER BOLT SET YCB 8" 8 INCH COVER BOLT SET YCC 10" 10 INCH COVER BOLT SET Change Shaft, Trunnion & Lever Hub Kimray is an ISO certified manufacturer. C2:60.1
2 DIMENSIONS TRUNNION ASSEBNLY 612, 812 & 1012 TO-D 25 TOB 4 1/4" A B 5 1/2 D C 5 1/4" 1 3/8" SIZE NUMBER A B C D No. SIZE OF BOLTS TO 11 in 9 1/2 in 71/4 in 41/4 in 8 3/4 x 3 1/ TO 13 1/2 in 11 3/4 in 71/4 in 41/4 in 8 3/4 x 3 1/ /8 in 16 in 14 1/4 in 71/2 in 41/2 in 12 7/8 x 3 1/2 All dimensions are in inches. HUTA 50 TOB-S 4 1/4" 8 3/4" 3 1/4" 8 1/2" 11 1/2" 2 1/2" 5 1/4" C2:IV Change Artwork
3 LEVER OPERATED LIQUID LEVEL CONTROLS SEALS Table 2 - Seal Options Level Controllers Part Standard Material Optional Material O-rings HSN FKM, AFLAS Diaphragm HSN FKM, AFLAS Bushing PTFE N/A Bushing Table 3 - Seal Options Trunnion Assemblies Part Standard Material Optional Material O-rings Nitrile FKM, HSN, AFLAS O Ring Packing Ring Diaphragm O Ring Seat Resistance Properties Table 4 - Seal Specifications NITRILE HIGHLY POLY- SATURATED FKM AFLAS URETHANE NITRILE GYLON Kimray Suffix - HSN V AF P GY Abrasion G G G GE E E Acid F E E E P E Chemical FG FG E E FG E Cold G G PF P G E Flame P P E E P P Heat G E E E F E Oil E E E E G E Ozone P G E E E E Set GE GE E PF F P Tear FG FG F PF GE E Water/Steam FG E P GE P E Weather F G E E E E CO2 FG GE PG GE G E H2S P FG P E G E Methanol G E PF PF P E Dynamic GE GE GE GE E P Electrical F F F E FG E Impermeability G G G G G E Tensile Strength GE E GE FG E E Temp. Range ( F) -40 to +220 F -15 to +300 F -10 to +350 F +25 to +450 F -40 to +220 F -350 to +500 F Temp. Range ( C) -40 to +105 C -26 to +149 C -23 to +177 C 0 to +232 C -40 to +104 C -212 to +260 C Form O,S,D O,S,D O,S,D O,S,D S,D S,D RATINGS: P-POOR, F-FAIR, G-GOOD, E-EXCELLENT Update Artwork Configuration of Mechanical Oil Valve is a trademark of Kimray, Inc. C2:V Issued 6/18
4 LEVER OPERATED LIQUID LEVEL CONTROLS MATERIAL SPECIFICATION Packing Box Table 7 - Level Controller Materials of Construction Part Description Standard Material Optional Material(s) Body Ductile Iron, ASTM A-395 ASTM A-216 WCB, ASTM A SS Stem ASTM A SS 316S, ASTM A-213 Plug Delrin ASTM A-316 Cage Delrin ASTM A-316, A-351 Seat HSN FKM Piston 316S, ASTM A-351 Packing Box ASTM A SS ASTM A SS Stem Piston Cage Plug Seat Body Table 8 - Trunnion Materials of Construction Part Description Standard Material Optional Material(s) Bonnet Ductile Iron ASTM A216 WCB Plate Steel SA Grade 70 Plate Packing Box Brass with Nitrile/Teflon Packing ASTM B-429 ASTM A-316, ASTM A-479 Shaft 303S, ASTM A-582 ASTM A-316, ASTM A-479 Float Hub ASTM A-316 ASME SA-351, ASTM A-351 Union Nut Ductile Iron ASTM - A395 Weld Neck 8 in. Schedule 100 Pipe ASTM A-106 Grade B Lever Hub Gray Iron, ASTM A-126-B Weld Neck Bonnet Plate Union Nut Packing Box DUCTILE IRON Body CAST STEEL Table 9 - Material Specification 316 STAINLESS STEEL 316 STAIN PH STAIN- Inner Parts 303 STAIN- Kimray SUFFIX CD CS C6 S6 PH - DEL DELRIN ASTM GROUP ASTM-A395 ASTM-A216 ASTM-A351 ASTM A276 ASTM A564 ASTM A582 ASTM D-4181 GRADE WCB CF8M ACETAL UNS J03002 J92900 S31600 S17400 NACE Compliant Yes Yes Yes Yes Yes No Yes C2:VI Issued 6/18 Configuration of Mechanical Oil Valve is a trademark of Kimray, Inc. Update Artwork
5 TEMPERATURE Table 8 - Temperature vs. Pressure Rating ASTM Class Temperature F ( C) Static Test Pressure (psig) 450 (31 bar) Maximum Allowable Non-Shock Pressure (psig) CAST DUCTILE ASTM A to 100 (-28 to 37) 250 (17.2 bar) 200 (93) 235 (16.2 bar) 300 (148) 215 (14.8 bar) 400 (204) 200 (13.7 bar) 500 (260) 170 (11.7 bar) 600 (315) 140 (9.6 bar) 650 (343) 125 (8.6 bar) 700 (371) CAST STEEL ASTM A WCB -20 to 100 (-28 to 37) 285 (20.0 bar) 200 (93) 260 (17.9 bar) 300 (148) 230 (15.9 bar) 400 (204) 200 (13.8 bar) 500 (260) 170 (11.7 bar) 600 (315) 140 (9.7 bar) 650 (343) 125 (8.6 bar) 700 (371) 110 (7.6 bar) SCREWED ANGLED (NPT) SCREWED THRU (NPT) FLANGED ANGLED (150RF) FLANGED THRU (150RF) Kimray valves conform to ASME B for working pressure vs working temperature & ASME B for flanges and flanged fittings. Change Artwork Configuration of Mechanical Oil Valve is a trademark of Kimray, Inc. C2:VII
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
OUNCES PRESSURE REGULATORS
OUNCES PRESSURE REGULATORS BACK PRESSURE TO ATMOSPHERE W/OUTSIDE SUPPLY Adjusting Screw 897 Nut 922 636SS6 (2.5 lbs. Std.) Spring Plate 636SS6 (5 lbs. Opt.) 7148S6 (20 lbs. Opt.) Bonnet 1336 Nut 2912 Screw
PRESSURE REGULATORS GAS OUNCES BACK PRESSURE TO VACUUM
PRESSURE REGULATORS GAS OUNCES BACK PRESSURE TO VACUUM APPLICATIONS: To maintain ounces of positive pressure on systems flowing into a downstream vacuum, such as vapor recovery systems. CERTIFICATIONS:
TEMPERATURE CONTROLLERS
LOW TEMPERATURE BASE ASSEMBLIES APPLICATIONS: Used to control a set temperature in indirect heaters, emulsion treaters, reboilers, steam generators, heat exchangers, cooler shutter controls, and salt bath
Low Pressure Control Valves
PB0013 Dec. 2017 Model MT Model DA Model ADA Contents Page Introduction Body Style 4 Valve Dimensions 6 Specifications 9 Elastomers 10 Model Code 11 NOTE This information is presented in good faith, Kimray
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
Iron Check Valves & Y-Strainers Illustrated Index
Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead
High Pressure Control Valves
Introduction PB0001 Dec. 2017 The Kimray High Pressure Control Valve is designed for controlling a variety of fluids at pressures up to 6000 psig (413 bar) and can be used for the discharge of liquid or
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
BSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
CAST IRON NON-RETURN VALVE SWING TYPE (Reflux Valve)
about us With the "COMMITMENT TO EXCELLENCE" drive, NVR is becoming a foremost name in bronze, brass, cast iron, cast seel and forged steel valves for domestic and industrial applications. Having the most
FLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
83R-200 Series FEATURES STANDARD MATERIAL LIST
83R-200 Series Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1-1/2 & 2 Socket Weld, 800 psig CWP, Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
PISTON BALANCED THROTTLING
Repair Manual PISTON BALANCED THROTTLING PISTON BALANCED THROTTLING REPAIR MANUAL INDEX Introduction... 1 Elastomer Materials... 2 Repair Kit Contents... 3 Disassembly: Topworks Pressure Opens... 5 Disassembly:
88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
series. Stainless Steel Ball Valve with Spring Return Handle
76-500 series Stainless Steel Ball Valve with Spring Return Handle Female NPT Thread, 1/4 to 1 2000 CWP (psig), 1.25 to 2 1500 CWP (psig). Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29
88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 SQUARE
87A-F00 SERIES Stainless Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM A351-CF8M
Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88L-F40 SERIES Low Temperature Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANDARD COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
Masoneilan * Series Control Valve
GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG
Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG ECCENTRIC PLUG VALVE FLOCENTRIC TM The FLOCENTRIC Eccentric Plug Valve is manufactured using CNC equipment in a world class facility using the finest materials available.
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE THRU 2
CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5 THRU 2 STANDARD LIST 2 Retainer ASTM A108 Type 1215 9 Gland Plate 302 or 304 SS 10 Stem Nut 316 SS ASTM A108, Carbon Steel, Chrome Plated
87A-100 SERIES. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
87A-100 SERIES Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body
1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
º to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
Master Valve USA w w w. M a s t e r Va l v e U S A. c o m
Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
CATALOG C-IRR-0805 AHEAD OF THE FLOW. Irrigation Valves
CATALOG C-IRR-0805 AHEAD OF THE FLOW Irrigation Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
International Standard Valve, Inc.
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are their special options is a registered trademark of International Standard Valve, Inc. www.isvalve.com
Bolted Two Piece Carbon Steel and Stainless Steel FLOATING BALL VALVE
Bolted Two Piece Carbon Steel and Stainless Steel FOATING BA VAVE Floating Valve Features: Bolted -Piece Construction Cast Steel 50 & 00 Forged Steel 00 to 500 Fire safe SS trim/cs ENP All valves NACE
International Standard Valve, Inc Cash Road, Stafford, Texas ISV s standards are our competitor s special options
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are our competitor s special options Product Summary is a registered trademark of International
Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1
76K-100-A SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service
Worcester Controls Series 94, , and The High-Performance Solution for Fugitive Emission, Toxic Gas or High-Cycle Applications
FCD WCABR023-00 (Part PB 94-3) Mass Emission Qualified by Independent Laboratory to EPA Testing Procedures (See Page 2) An ISO 900 Registered Company Series 94, 94-50, 94-300 and 94-600 The High-Performance
This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.
SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions
Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1
88A-F00 SERIES Carbon Steel ASME Class 600 Flanged Full Port Ball Valve - 1 For STANAR COMPLIANCE and STANAR FEATURES refer to page -3. STANAR MATERIAL LIST PART MATERIAL 1 Body ASTM A216-WCB 2 Retainer
94115 Vacuum Vent (Side Mounted) Features. Vacuum Vent (Side Mounted) Side Mounted
94115 The Shand & Jurs 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
RSCV1 AMERICAN DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL. It s What We Know. SERIES 2100 RESILIENT SEATED CHECK VALVE
3 16 SERIES 2100 RESILIENT SEATED CHECK VALVE AMERICAN FLOW CONTROL It s What We Know. AMERICAN DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION SERIES 2100 RESILIENT SEATED CHECK VALVE DROP-TIGHT SEATING at
Specification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
COMMERCIAL VALVES. When QUALITY, SERVICE and PRICE MATTER MOST! GATE VALVES GLOBE VALVES CHECK VALVES BUTTERFLY VALVES
COMMERCIAL CONSTRUCTION FIRE PROTECTION HVAC IRRIGATION MINING WATER & WASTE MANAGEMENT OIL & GAS POWER GENERATION When QUALITY, SERVICE and PRICE MATTER MOST! COMMERCIAL VALVES GATE VALVES GLOBE VALVES
Cover Page - Series 60 Wafer Check Valves
DESCRIPTION Cover Page - Series 60 Wafer Check Vs Standard Features Section 2 Index BULLETIN NO. CV-100 CV-101R3 VALVE DIMENSIONS - DIN 3202 DRAWING NO. 2 to 12 (Inches) / CV Values & Construction Materials
M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
American Flow control 2-12 Series 2500
American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve
All definitions are defined according to ANSI/AWWA C
SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification
87K-900 SERIES. Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 D-51
87K-900 SERIES Super Duplex Stainless Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
Fasani Pressure Seal Cast gate Valves - Style B WEDGE GATE
A wide range of gate valves specifically designed for high pressure and high temperature applications. Features GENERAL APPLICATION Our pressure seal gate valves are recommended for a large variety of
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
SECTION PLUMBING PIPING
SECTION 22 1000 PLUMBING PIPING PART 1 GENERAL 1.1 QUALITY ASSURANCE A. Perform Work in accordance with authority having jurisdiction standards. Utilize products as indicated in drawings and as allowed
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16
Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated
World Class Bellows Seal Valves
World Class Bellows Seal Valves Fugitive Emissions Sealing High Cycle Bellows In-Line Servicing High Flow Capacity Conval Bellows Seal Valves meet all of the rigorous requirements of MSS SP-117, ensuring
76-AR series. Stainless Steel Std. Port Ball Valve with Actuator Ready ISO Mounting Pad
76-AR series Stainless Steel Std. Port Ball Valve with Actuator Ready ISO Mounting Pad Female NPT Thread, 1/4-1 2000 CWP (psig), 1.25-2 1500 CWP (psig), 2.5-3 1000 CWP (psig). Cold Non-Shock. 250 psig
Materials Materials Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown.
19000 Materials Materials 15 6 9 10 14 7 8 5 7 3 2 4 1 19000-2 Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown. 19000.5 19000 (SRV-1/Q3.01) 19000
Base Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water
Base Models: 1-22SV Base Models: 1-22SV F, P, R VERSIONS 1 Pump Body Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 2 Impeller Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 3 Diffuser
Series. FEATURES UL Listed for LP-Gas, natural gas and flammable liquid to 250 psig UL LISTINGS
489-100 Series Carbon Steel LP-Gas Ball Valve NPT Threaded. 1/4 to 1 2000 psig WOG; 1-1/4 to 2 1500 psig WOG; 2-1/2 to 3 1000 psig WOG. Cold Non-Shock. 250 psig LP-Gas. 150 psig Saturated Steam. Vacuum
P600 Pressure Regulator
P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
Lead Free LEAD FREE VALVES A H E AD OF TH E F L O W CATALOG C-LFV nibcoleadfree.com. *Weighted average lead content 0.25%
Lead Free LEAD FREE VALVES * A H E AD OF TH E F L O W nibcoleadfree.com CATALOG C-LFV-0416 THE LEAD FREE AUTHORITY AUTHORITY FREE LEAD THE WROT COPPER & CAST PERFORMANCE BRONZE Sweat and thread Size range:
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator used in commercial and industrial applications
AMERICAN DARLING MARK
2 12 250 p.s.i.g. SERIES 2500 RESILIENT WEDGE GATE VALVE AMERICAN FLOW CONTROL AMERICAN DARLING MARK 73 2 FIRE HYDRANT It s What We Know. CONSTRUCTION UPPER O-RING SEALS can be replaced while the valve
M33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
Triple offset valve with metallic seat for High performance. Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1783/4--EN Triple offset valve with metallic seat for High performance Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN 12516 and ASME B16-34 Applications LNG process
Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
Series. Carbon Steel Ball Valve 1/4-1
A-28 89-100 Series Carbon Steel Ball Valve 1/4-1 NPT Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Federal Specification:
SERIES. Double Union End Stainless Steel Ball Valve F-7
Threaded, 1/2 to 1 2000 CWP (psig), 1.25 to 2 1500 CWP (psig). Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. MSS SP-110 compliant. FEATURES Heavy duty quarter turn handles Reinforced
For outdoor installations, see Vale Engineering Standard Specification SPEC
SPEC-3023 1/7 1.0 PURPOSE This specification describes the minimum requirements for dry (less than 100 ppm H20) gaseous sulphur dioxide at pressures up to and including 10 PSIG for indoor service. Do not
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
Product data sheet. Wouter Witzel - EVS PDS B
PRODUCT DATA General Description BUTTERFLY VALVE - Centric rubber lined Design Code EN 593 Size Range DN 50-1400, NPS 2-56 Maximum Pressure 10/16 bar 20 bar for DN 600 DESIGN Body Flangeless wafer type
Apollo Flow Controls A SERIES ALLOY-20 BALL VALVE 1/4-1
399-100-A SERIES ALLOY-20 BALL VALVE 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. FEATURES Investment cast
KTM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries
TM Fire-safe and Anti-Static ASME 150/300 one piece, end entry, flanged ball valve for oil, gas, petrochemical and chemical industries Features eneral applications Ideally suited for use in the oil and
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
M Series 3-PC High Performance Metal Seat Ball Valve
M Series 3-PC High Performance Metal Seat Ball Valve 1 M Series 3-PC High Performance Metal Seat Ball Valve Full Bore TH/SW/BW/Flanged Ends Class 600LB The A-T Controls M Series metal seat ball valve is
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in
KLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
Valves that bear the Hallmark of Quality
Valves that bear the Hallmark of Quality The Company with Commitment Reliability Innovation C.R.I. has now become a household name associated with water lifting pumps be it for Residential, Agriculture,
PENBERTHY SERIES 100 AND 200 STRAIGHT PATTERN FLAT GLASS GAGECOCKS
Straight pattern gagecocks that provide a 90 connection to the process vessel and isolate the gage chamber from the liquid content of the vessel FEATURES Straight pattern. Integral bonnet (100 series).