Refer to the last page for the affected model list of the enhancement unit or the option.

Size: px

Start display at page:

Download "Refer to the last page for the affected model list of the enhancement unit or the option."

Cody Arnold
6 years ago
Views:

1 (Page./8) Ref. A3LM-205 (F08) Subject: Parts Change Information A3LM Model: Subject details: Index: TASKalfa 350i, TASKalfa300i, TASKalfa 255ci, TASKalfa 2550ci, FS-6025MFP, FS-6025MFP/B, FS-6030MFP, FS-6525MFP, FS-6530MFP, FS-C8025MFP, FS-C8020MFP, FS-C8520MFP, FS-C8525MFP, TASKalfa 220, TASKalfa 80, TASKalfa 22, TASKalfa 8, TASKalfa 220, TASKalfa 80, TASKalfa 300i, KM-2560, KM-3060, KM-2540, KM-3040, KM-2050, KM-2550, DP-770/DP-770(B), DP-772, DP- 773, DP-480, DT-730/DT-730(B), PF-80, PF-79, PF-790, PF-470, PF- 47, PF-480, DU-480, DF-770(D), DF-79, PH-7A/7B/7C/7D, MT-730(B), AK-740, DF-470, FAX System(W), FAX System(U), FAX System(X) TASKalfa 500ci, TASKalfa 400ci, TASKalfa 300ci, TASKalfa 250ci, FS-C8500DN, KM-3035, KM-4035, KM-5035, KM-3530, KM-4030 Refer to the last page for the affected model list of the enhancement unit or the option. Revised contents Ver.05 Upgrade: The contents of Ver.05 are newly added. Accordingly, the contents in the cover (from Subject to Index) are added and corrected and the layout is changed. (Ver.05) Page 4 Common use of the part (Changing PARTS MOTOR LIFT DECK SP) PF-80 Page 4 Changing the speaker TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 350i, TASKalfa 300i (Ver.04) Page 5 (Except KDA) Prohibition of specified toxic substances in Canada (Service parts information) TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 350i, TASKalfa 300i Page 5 (For KDTW only) Correcting the rating label and the product indication label TASKalfa 350i, TASKalfa 300i, TASKalfa 255ci, TASKalfa 220, TASKalfa 80, TASKalfa 2200, TASKalfa 800

2 Index: (Page.2/8) Ref. A3LM-205 (F08) (Ver.04) Page 6 Common use of the part (PARTS MOTOR-BL W20 SP) TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa 205c/FS-C8020MFP, TASKalfa 255c/FS-C8025MFP Page 6 Reducing the torque when ascending and descending the DP pickup roller (Changing the spring) DP-773, TASKalfa 2550ci, TASKalfa 306i/FS-6530MFP, TASKalfa 256i/FS-6525MFP, TASKalfa 255/FS-6025MFP/TASKalfa 255b/FS-6025MFP/B, TASKalfa 305/FS-6030MFP, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa 255c/FS-C8025MFP, TASKalfa 205c/FS-C8020MFP Page 7 Changing the cable tie with snap-fit TASKalfa 2550ci, KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E, FS-C800DN, FS-C800DN+, KM-C2520, KM-C3225, KM-C3232, TASKalfa 500ci, TASKalfa 400ci, TASKalfa 300ci, TASKalfa 250ci, TASKalfa 552ci, FS-C8500DN, FAX System(X), PF-79 Page 7 Common use of the parts (COVER MAIN EXIT / COVER TRAY B EJECT) DF-79 Page 8 Easing parts procurement (Changing WIRE DEVELOPING / WIRE CONT SW) KM-3035, KM-4035, KM-5035, KM-2520/253, KM-3530/353, KM-4030/403, FS-900DN, FS-9500DN, FS-920DN, FS-9520DN Page 8 Easing the assembly work (Changing the ground springs) PF-79, PF-790, TASKalfa 350i, TASKalfa 300i, TASKalfa 255ci (Ver.03) Page 9 Common use of the part (Changing the PARTS HVU2 SP) TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa255c/FS-C8025MFP, TASKalfa205c/FS-C8020MFP Page 9 (For KDTW) Adding Taiwan Green Mark label TASKalfa 255ci Page 9 Changing the interlock switch TASKalfa 350i, TASKalfa 300i, TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220, TASKalfa 256i/FS-6525MFP, TASKalfa 306i/FS-6530MFP, TASKalfa255b/FS-6025MFP/B, TASKalfa255/FS-6025MFP, TASKalfa305/FS-6030MFP, TASKalfa 80, TASKalfa 220, TASKalfa 8, TASKalfa 22, TASKalfa 300i, KM-2560, KM-3060, KM-2540, KM-3040, KM-650, KM-2050, KM-2550, KM-635, KM-2035, KM-635CHN, KM-2035CHN, KM-648

3 (Page.3/8) Ref. A3LM-205 (F08)

4 Index: (Page.4/8) Ref. A3LM-205 (F08) (Ver.03) Page 0 Improving the heat resistance TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa255c/FS-C8025MFP, TASKalfa205c/FS-C8020MFP Page 0 Part Number Information (CONTAINER CONN PWB) TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 Page Improving the heat resistance (Changing the shape of the PROTECTOR LVU) TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 Page Common use of the part (GUIDE HF LOWER) PF-80 Page 2 Common use of the part (COVER INNER UPPER and MOUNT OPERATION) DF-79 (Ver.02) Page 3 Part number information (SHAFT GLASS CLN) TASKalfa 255ci, TASKalfa 2550ci Page 3 Changing the material of the separation claws in the drum unit TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 Page 4 Changing the stapler DF-470 (Ver.0) Page 5 Part Numbers Change (GEAR CONTAINER Z25L, GEAR CONTAINER Z35R, PWB DRUM CONNECT ASSY, ROLLER DU, GEAR Z25S EXIT INPUT) TASKalfa 350i, TASKalfa 300i Page 5 (For KDCN) Changing the front cover for service (Removing the Chinese Energy Efficiency label) FS-C8025MFP, FS-C8020MFP, FS-6030MFP, FS-6025MFP, FS-6025MFP/B Page 6 Part Numbers Information (Pick up, paper feed and retard rollers in the primary paper feed unit) TASKalfa 255ci, TASKalfa 2550ci

(Page.5/8) Ref. A3LM-205 (F08) (Ver.05-P: 205/2) Subject: Common use of the part (Changing PARTS MOTOR LIFT DECK SP) Model: PF-80 The following part is changed for common use of the part.

N0008666 A3HM_A3LM_IPCI 000090 PARTS MOTOR LIFT DECK SP 2 2 O O Subject: Changing the speaker Model: TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 350i, TASKalfa 300i The speaker is changed as below for

5 (Page.5/8) Ref. A3LM-205 (F08) (Ver.05-P: 205/2) Subject: Common use of the part (Changing PARTS MOTOR LIFT DECK SP) Model: PF-80 The following part is changed for common use of the part. 303NF NF NF9409 3NF9409 Note: Use the new part in the next development models. N A3HM_A3LM_IPCI PARTS MOTOR LIFT DECK SP 2 2 O O Subject: Changing the speaker Model: TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 350i, TASKalfa 300i The speaker is changed as below for the part procurement reason (the old speaker is not continually produced in vendor.) (Before) (After) 2 302LC LC K K LC LC94370 *: The part number remains unchanged. Q ty bi lity PARTS SPEAKER SP O O SPEAKER - O - N /N A3HM_A3LM _IPCI TASKalfa 255ci TASKalfa 350i/300i, * Changed to. TASKalfa 2550ci

Service part only Additives of lubricating oil are changed based on the Canadian regulation of specified toxic substances.

6 (Page.6/8) Ref. A3LM-205 (F08) (Ver.04-P: 205/9) (Except KDA) Prohibition of specified toxic substances in Canada Subject: (Service parts information) Model: TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 350i, TASKalfa 300i Implementation: Service part only Additives of lubricating oil are changed based on the Canadian regulation of specified toxic substances. Note: Either of the new or old parts can be used in other countries than Canada. (This information was already issued for KDA.) [Content of changes] The parts are changed to the one not using the prohibited substance (BNST). 302MV9330 2MV MV933 2MV933 N A3LM _IPCI Q ty bi lity PARTS STORAGE DEVICE SP O O Subject: (For KDTW only) Correcting the rating label and the product indication label Model: TASKalfa 350i, TASKalfa 300i, TASKalfa 255ci, TASKalfa 220, TASKalfa 80, TASKalfa 2200, TASKalfa 800 Implementation: From the July 205 production The company names on the rating label and the product indication label are corrected. The following are the rating label and the product indication label for TASKalfa 300i. [Rating label] [Product indication label] (Before) (After) N (6A3)/N (Po)/N (V,G)/N (T)/N (K)/N (J2)/N (A)/ N (6A4)/N (other) A3LM_IPCI

TASKalfa 255c/FS-C8025MFP The motor () is changed for common use of the part. 302K994322 2K994322 302K994323 2K994323 *All q'ty to use is affected.

N0008599/N00085992 A3LM_IPCI 000066 Q ty bi lity PARTS MOTOR-BL W20 SP * * O O Subject: Reducing the torque when ascending and descending the DP pickup roller (Changing the spring) DP-773, TASKalfa

7 (Page.7/8) Ref. A3LM-205 (F08) (Ver.04-P2; 205/9) Subject: Common use of the part (PARTS MOTOR-BL W20 SP) TASKalfa 255ci, TASKalfa 2550ci, Model: TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa 205c/FS-C8020MFP, TASKalfa 255c/FS-C8025MFP The motor () is changed for common use of the part. 302K K K K *All q'ty to use is affected. Note: Use the new parts in the next development models. N /N A3LM_IPCI Q ty bi lity PARTS MOTOR-BL W20 SP * * O O Subject: Reducing the torque when ascending and descending the DP pickup roller (Changing the spring) DP-773, TASKalfa 2550ci, TASKalfa 306i/FS-6530MFP, TASKalfa 256i/FS-6525MFP, Model: TASKalfa 255/FS-6025MFP/TASKalfa 255b/FS-6025MFP/B, TASKalfa 305/FS-6030MFP, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa 255c/FS-C8025MFP, TASKalfa 205c/FS-C8020MFP Implementation: From the April 205 production The shape of the spring () is changed as shown below to reduce the torque when ascending and descending the DP pickup roller. Spring () (Before) (After) [DP] (Machine rear side) 3HK MH8020 2MH8020 N A3LM_IPCI Q ty bi lity SPRING LIMITER O O

FS-C800DN+, KM-C2520, KM-C3225, KM-C3232, Model: TASKalfa 500ci, TASKalfa 400ci, TASKalfa 300ci, TASKalfa 250ci, TASKalfa 552ci,

(Before) (After) 7YZM4000++H0 7YZM40004++H0 YZ037950 YZ48350 *All q'ty to use is affected. N00084495 A3LM_IPCI 000052 ACCESS.

for common use of the parts. [COVER MAIN EXIT()] The shapes are added. [COVER TRAY B EJECT(2)] The shape is added.

8 (Page.8/8) Ref. A3LM-205 (F08) (Ver.04-P3; 205/9) Subject: Changing the cable tie with snap-fit TASKalfa 2550ci, KM-C2525E, KM-C3225E, KM-C3232E, KM-C4035E, FS-C800DN, FS-C800DN+, KM-C2520, KM-C3225, KM-C3232, Model: TASKalfa 500ci, TASKalfa 400ci, TASKalfa 300ci, TASKalfa 250ci, TASKalfa 552ci, FS-C8500DN, FAX System(X), PF-79 The shape of the cable tie with snap-fit is changed by the vendor as shown below to strengthen it. (Before) (After) 7YZM4000++H0 7YZM H0 YZ YZ48350 *All q'ty to use is affected. N A3LM_IPCI ACCESS.BAND * * O O Subject: Common use of the parts (COVER MAIN EXIT / COVER TRAY B EJECT) Model: DF-79 The following parts are changed for common use of the parts. [COVER MAIN EXIT()] The shapes are added. [COVER TRAY B EJECT(2)] The shape is added. The engraving is relocated. The holes are added. 303NB NB0442 3NB044 3NB0442 COVER MAIN EXIT O O 2 303NB NB040 3NB0400 3NB040 COVER TRAY B EJECT O O Note: Use the new parts in the next development models. N /N A3LM _IPCI

KM-2520/253, KM-3530/353, KM-4030/403, Model: FS-900DN, FS-9500DN, FS-920DN, FS-9520DN The following parts are changed to

2BL270 302GR46200 2GR46200 WIRE DEVELOPING O O * 2 2BL2780 302GR46250 2GR46250 WIRE CONT SW O O * : KM-2520/253,

the assembly work (Changing the ground springs) PF-79, PF-790, TASKalfa 350i, TASKalfa 300i, TASKalfa 255ci PF-79/PF-79:

ease the assembly work. [Machine right side] (Upper standard cassette) From Old to New 8mm (Old ) (New ) 3.

pati 302MV0720 302MV072 SPRING EARTH FEED 2 2MV0720 2MV072 O O * 302MV0760 Lower standard cassette 2 ----------- SPRING

9 (Page.9/8) Ref. A3LM-205 (F08) (Ver.04-P4; 205/9) Subject: Easing parts procurement (Changing WIRE DEVELOPING / WIRE CONT SW) KM-3035, KM-4035, KM-5035, KM-2520/253, KM-3530/353, KM-4030/403, Model: FS-900DN, FS-9500DN, FS-920DN, FS-9520DN The following parts are changed to ease parts procurement. 2BL GR GR46200 WIRE DEVELOPING O O * 2 2BL GR GR46250 WIRE CONT SW O O * : KM-2520/253, KM-3530/353, KM-4030/403, FS-900DN, FS-9500DN N /N OTHER_IPCI Subject: Model: Implementation: Easing the assembly work (Changing the ground springs) PF-79, PF-790, TASKalfa 350i, TASKalfa 300i, TASKalfa 255ci PF-79/PF-79: After using up the old stock Other models: From the May 205 production The ground springs are changed as shown below to ease the assembly work. [Machine right side] (Upper standard cassette) From Old to New 8mm (Old ) (New ) 3.5mm (Lower standard cassette) From Old to New 2 (New 2) (Paper feeder) From Old 3 to New 3 (Old 3) 8mm 7mm (New 3) 7mm Com pati 302MV MV072 SPRING EARTH FEED 2 2MV0720 2MV072 O O * 302MV0760 Lower standard cassette SPRING EARTH FEED B - 2MV O for 350i/300i/255ci 303NN NN24230 *2 3 WIRE EARTH FEED L 3NN NN24230 O O PF-790/PF-79 *: The old was attached in the upper and lower standard cassette for 350i/300i/255i, but the new is attached in the upper standard cassette only. *2: The part number remains unchanged. N /N A3LM _IPCI 00005

TASKalfa205c/FS-C8020MFP The PARTS HVU2 SP () is changed for common use of the part.

10 (Page.0/8) Ref. A3LM-205 (F08) (Ver.03-P: 205/5) Subject: Common use of the part (Changing the PARTS HVU2 SP) TASKalfa 255ci, TASKalfa 2550ci, Model: TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa255c/FS-C8025MFP, TASKalfa205c/FS-C8020MFP The PARTS HVU2 SP () is changed for common use of the part. 302K K N K K09427 A3LM_IPCI PARTS HVU2 SP O O Subject: (For KDTW) Adding Taiwan Green Mark label Model: TASKalfa 255ci Implementation: From the March, 205 production The Taiwan Green Mark label is affixed on the carton of the toner kit according to the grant of the Taiwan Green Mark. Taiwan Green Mark label N A3LM_IPCI Subject: Changing the interlock switch TASKalfa 350i, TASKalfa 300i, TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220, TASKalfa 256i/FS-6525MFP, TASKalfa 306i/FS-6530MFP, TASKalfa255b/FS-6025MFP/B, TASKalfa255/FS-6025MFP, Model: TASKalfa305/FS-6030MFP, TASKalfa 80, TASKalfa 220, TASKalfa 8, TASKalfa 22, TASKalfa 300i, KM-2560, KM-3060, KM-2540, KM-3040, KM-650, KM-2050, KM-2550, KM-635, KM-2035, KM-635CHN, KM-2035CHN, KM-648 The interlock switch () is changed for the parts procurement reason. 7SM H0 SM * All q'ty to use in each main unit N SM H0 SM47320 A3LM_IPCI SW.MICRO * * O O

11 (Page./8) Ref. A3LM-205 (F08) (Ver.03-P2: 205/5) Subject: Improving the heat resistance TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, Model: TASKalfa255c/FS-C8025MFP, TASKalfa205c/FS-C8020MFP Implementation: From the March, 205 production A black sheet is affixed on the rear cover (302K09444_) near the power source PWB for improving the heat resistance. The part number of the rear cover remains unchanged. Black sheet Rear cover (302K09444_) N000857/N /N A3LM_IPCI Subject: Part Number Information (CONTAINER CONN PWB) Model: TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 The part number of the CONTAINER CONN PWB () is registered. FIG. 3 Frames N NG NG94420 A3LM_IPCI PARTS PWB ASSY CONTAINER CONN SP Q ty bi lity - - O

2200, TASKalfa 80, TASKalfa 220 Implementation: From the March, 205 production The shape of the PROTECTOR LVU () near the

(Before) (After) 302NG02550 2NG02550 302NG0255 2NG0255 Q ty bi lity PROTECTOR LVU O O Subject: Common use of the part (GUIDE HF

12 (Page.2/8) Ref. A3LM-205 (F08) (Ver.03-P3: 205/5) Subject: Improving the heat resistance (Changing the shape of the PROTECTOR LVU) Model: TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 Implementation: From the March, 205 production The shape of the PROTECTOR LVU () near the capacitors on the LVU PWB is changed for improving the heat resistance. (Before) (After) 302NG NG NG0255 2NG0255 Q ty bi lity PROTECTOR LVU O O Subject: Common use of the part (GUIDE HF LOWER) Model: PF-80 The following part is changed for common use of the part. [GUIDE HF LOWER ()] (Before) (After) The shape is changed. 303NF0600 3NF NF060 3NF060 Note: Use the new part in the next development model. N A3LM_IPCI Q ty bi lity GUIDE HF LOWER O O

13 (Page.3/8) Ref. A3LM-205 (F08) (Ver.03-P4: 205/5) Common use of the part Subject: (COVER INNER UPPER and MOUNT OPERATION) Model: DF-79 The following parts (, 2) are changed for common use of the parts. [COVER INNER UPPER ()] [MOUNT OPERATION (2) (Before) (After) (Before) (After) The shape is changed. The shape is changed NB NB NB042 3NB042 N /N NB NB NB0422 3NB0422 COVER INNER UPPER O O MOUNT OPERATION O O A3HM/A3LM_IPCI

part has been used since the first mass-production) The following part () in the LSU is registered as the service part.

of the separation claws in the drum unit Model: TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 The material of the

[Drum unit] (Before) (After) 2 3 702NG0UN0 072NG0UN 702NG0KS0 072NG0KS 702NG0KR0 072NG0KR 702NG0UN0 072NG0UN 702NG0KS0 072NG0KS

14 (Page.4/8) Ref. A3LM-205 (F08) (Ver.02-P: 205/3) Subject: Part number information (SHAFT GLASS CLN) Model: TASKalfa 255ci, TASKalfa 2550ci Implementation: --- (This part has been used since the first mass-production) The following part () in the LSU is registered as the service part. SHAFT GLASS CLN () A3LM_IPCI K K09090 Q ty bi lity SHAFT GLASS CLN - - O Subject: Changing the material of the separation claws in the drum unit Model: TASKalfa 800, TASKalfa 2200, TASKalfa 80, TASKalfa 220 The material of the separation claws in the drum unit is changed from PPS to ETFE to strengthen it. [Drum unit] (Before) (After) NG0UN0 072NG0UN 702NG0KS0 072NG0KS 702NG0KR0 072NG0KR 702NG0UN0 072NG0UN 702NG0KS0 072NG0KS 702NG0KR0 072NG0KR Note: The item codes remain unchanged with this change. N A3LM_IPCI (Ver.02-P2; 205/3) Old separation claw: PPS Old separation claw: ETFE Q ty bi lity MK-405/MAINTENANCE KIT O O Except KDCN and KDKR MK-405/MAINTENANCE KIT O O For KDCN MK-405/MAINTENANCE KIT O O For KDKR

15 (Page.5/8) Ref. A3LM-205 (F08) Subject: Changing the stapler Model: DF-470 Implementation: From the available timing of the February 205 production The stapler () is changed for the part procurement reason. Accordingly, the base color of the label affixed on the motor (circled in red) is changed from white to blue. [] 303JY4400 3JY JY440 3JY440 N A3LM_IPCI STAPLER EH590 O O

16 (Page.6/8) Ref. A3LM-205 (F08) (Ver.0-P: 205/2) Part Numbers Change Subject: (GEAR CONTAINER Z25L, GEAR CONTAINER Z35R, PWB DRUM CONNECT ASSY, ROLLER DU, GEAR Z25S EXIT INPUT) Model: TASKalfa 350i, TASKalfa 300i s The packings of the following parts are changed to suit the drop shock and vibration in transit K K K K K3070 2K K K K K A3LM_IPCI K K K K K K K K K K PARTS GEAR CONTAINER Z25L SP O O PARTS GEAR CONTAINER Z35R SP O O PARTS PWB DRUM CONNECT ASSY SP O O PARTS ROLLER DU SP 3 3 O O PARTS GEAR Z25S EXIT INPUT SP O O Subject: (For KDCN) Changing the front cover for service (Removing the Chinese Energy Efficiency label) Model: FS-C8025MFP, FS-C8020MFP, FS-6030MFP, FS-6025MFP, FS-6025MFP/B Implementation: From the available timing of the January 205 production (Service part only) The middle front cover for service is supplied without the Chinese Energy Efficiency label that the standards do not require to affix on the front cover for service. 2 3 service. 302K K KZ KZ K K The Chinese Energy Efficiency label is removed from the front cover for 302L L L L K K KZ9402 2KZ K K L L N _A3LM_IPCI PARTS COVER FRONT ASSY 25 E SP PARTS COVER FRONT ASSY 20 E SP PARTS COVER FRONT ASSY 30 E SP PARTS COVER FRONT ASSY 25 E SP PARTS COVER FRONT ASSY 25 KS SP PARTS COVER FRONT ASSY 25/B KS SP O O FS-C8025MFP - O - FS-C8020MFP - O - FS-6030MFP - O - - O - FS-6025MFP FS-6025MFP/B FS-6025MFP Changed to 4 FS-6025MFP/B Changed to 4

17 (Page.7/8) Ref. A3LM-205 (F08) (Ver.0-P2; 205/2) Part Numbers Information Subject: (Pick up, paper feed and retard rollers in the primary paper feed unit) Model: TASKalfa 255ci, TASKalfa 2550ci Implementation: --- The part numbers of the following individual parts (-3) in the primary paper feed unit are informed. FIG. 9 Paper Feed Section PARTS PRIMARY FEED ASSY SP (302MV9406) IPCI HN HN F F F9097 2F9097 Q ty bi lity PULLEY PICKUP ASSY - - O Pick up roller PULLEY FEED ASSY - - O Paper feed roller RETARD ROLLER ASSY - - O Retard roller

18 (Page.8/8) Ref. A3LM-205 (F08) [Affected Model list] Item Affected Model DP-770 DP-770(B) DP-772 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, TASKalfa 555ci/455ci/355ci/305ci, TASKalfa 550i/450i/350i, TASKalfa 255ci, TASKalfa 350i, TASKalfa 300i TASKalfa 555ci/455ci/355ci/305ci, TASKalfa 550i/450i/350i, TASKalfa 255ci, TASKalfa 350i, TASKalfa 300i TASKalfa 255ci, TASKalfa 350i, TASKalfa 300i DP-773 DP-480 TASKalfa 2200/800/220/80 DT-730 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i DT-730(B) TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, TASKalfa 255ci, TASKalfa 350i/300i PF-80 PF-79 PF-790 PF-470 PF-47 TASKalfa 255ci, TASKalfa 350i, TASKalfa 300i TASKalfa 255ci, TASKalfa 350i, TASKalfa 300i TASKalfa 2550ci TASKalfa255/FS-6025MFP, TASKalfa255b/FS-6025MFP/B, TASKalfa305/FS-6030MFP, TASKalfa205c/FS-C8020MFP, TASKalfa255c/FS-C8025MFP, TASKalfa 256i/FS-6525MFP, TASKalfa 306i/FS-6530MFP, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP PF-480 TASKalfa 2200/800/220/80 DU-480 TASKalfa 2200/800/220/80 TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN, DF-770(D) FS-C8600DN, TASKalfa 555ci/455ci/355ci/305ci, TASKalfa 550i/450i/350i, TASKalfa 255ci, TASKalfa 350i, TASKalfa 300i DF-79 TASKalfa 350i/300i DF-470 AK-740 MT-730(B) PH-7A/7B/7C/7D FAX System(W) FAX System(U) TASKalfa255/FS-6025MFP, TASKalfa255b/FS-6025MFP/B, TASKalfa305/FS-6030MFP, TASKalfa205c/FS-C8020MFP, TASKalfa255c/FS-C8025MFP, TASKalfa 256i/FS-6525MFP, TASKalfa 306i/FS-6530MFP, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP, TASKalfa 2550ci TASKalfa 255ci, TASKalfa 2550ci, TASKalfa 350i/300i DF-790/DF-790(B)/DF-790(C) (Main unit: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN) DF-79 (Main unit: TASKalfa 350i/300i) DF-770/DF-770(B)/DF-770(C)/DF-770(D) (Main unit: TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN) DF-790/DF-790(B)/DF-790(C) (Main unit: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, FS-C8650DN, FS-C8600DN) DF-79 (Main unit: TASKalfa 350i/300i) TASKalfa 2550ci, TASKalfa 555ci/455ci/355ci/305ci, TASKalfa 550i/450i/350i TASKalfa255/FS-6025MFP, TASKalfa255b/FS-6025MFP/B, TASKalfa305/FS-6030MFP, TASKalfa205c/FS-C8020MFP, TASKalfa255c/FS-C8025MFP, TASKalfa 256i/FS-6525MFP, TASKalfa 306i/FS-6530MFP, TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP FAX System(X) TASKalfa 220/80

Printer Options DU 25. www MK-Electronic de PARTS CATALOGUE. Printer Options Parts Catalogue KYOCERA DU 25 Page 1

Printer Options DU 25. www MK-Electronic de PARTS CATALOGUE. Printer Options Parts Catalogue KYOCERA DU 25 Page 1 Printer Options DU 25 PARTS CATALOGUE 6 2 998 Printer Options Parts Catalogue KYOCERA DU 25 Page DU 25 Parts Catalogue Table of Contents Covers (Fig.) 3 Handler/Stacker (Fig.3) 6 Duplex Drawer Outer (Fig.4a)