15 Pin DSUB - MALE 15 Pin DSUB - FEMALE 9 Pin DSUB - MALE 9 Pin DSUB - FEMALE
|
|
- Shannon Booker
- 6 years ago
- Views:
Transcription
1 Last Revised: 6 Oct 07 Description: This data sheet show our range of high quality appliance cables, such as signal cables (VGA / DVI / DisplayPort (DP)), Touchscreen and power cables. These are either delivered with our products or can be purchased later. This data sheet also cover pinout description and in-depth technical information for the standard cables / adapters. Cables in this datasheet are suitable for Maritime Multi Displays, Maritime Multi Computers and Computers. Custom solutions and variations of the specific cables, such as greater length or a mix between the standard connectors for extensions purposes (like BNC-female to BNC-male) and more can also be delivered on demand. Contents of this Datasheet: Topic / Typenumbers Type Number Page Standard VGA signal Cable HA-VGA-M-3 Page Standard DVI Signal Cable HA-SDM-M Page 3 Standard VGA to BNC Signal Cable CD07544JHC00FMB-D Page 4 Touch Screen / Serial Cable 3750 Page 5 Power Cable (30VAC) FS-CABLE Page 6 Power Cable (5VAC) Page 7 DC Power Input Connector and housing FCE7-EWSS-NO and L7DPPK09JSU (cover) Page 8,9 DVI to RGB/VGA Adapter DVI-4 Page 0 DP to DP (DisplayPort.) Signal Cable. VSD0004- Page Common Gender Types: 5 Pin DSUB - 5 Pin DSUB - FE 9 Pin DSUB - 9 Pin DSUB - FE 8+ Pin DVI-D - +5 Pin DVI-I - 5 x BNC - FE DisplayPort (DP) 0P Male Pin DSUB - 30V Eur Standard - 0V US Standard - 30V / 5V - FE Tel: (+47) mail@hatteland-display.com - /
2 Last Revised: 6 Oct 07 HA-VGA-M-3: Standard VGA 5-pin Male Signal Cable. All material are RoHS and California Prop.65 compliant. Leadfree. DSUB PIN > Description < DSUB PIN RED GREEN 3 BLUE RED SPIRAL GREEN SPIRAL BLUE SPIRAL WHITE ORANGE 4 VIOLET GREEN 3 BLACK 3 4 BROWN 4 5 YELLOW SHELL OVERALL BRAID SHELL Pin Pin Pin 5 Pin ±5mm Length 000±50mm 50±5mm HA-VGA-M-3 Pin 5 Pin Pin 5 Pin x HD5 DSUB (pin 9 removed) x Black Molded PVC Hood 3 x PAT. NO:US 6,87,48 B RF-BLOK Shielding metal can. 4 4 x Black #4/40 Thumbscrew 5 UL076 (3AWG Foam skin mini-coaxial w/spiral) +Copper foil overall shield x3c+(8awg)x7c+drain +AL-Foil+85% braid overall; black pvc jacket OD=ø5.0mm 6 x Black molded ferrite core (4.x8.5x8mm) 7 x White color pad print: "HA-VGA-M-3" (Hatteland Display typenumber) Tel: (+47) mail@hatteland-display.com - /
3 Last Revised: 6 Oct 07 HA-SDM-M: Standard DVI-D 8+pin Male Signal Cable (Single Link Digital). All material are RoHS and California Prop.65 compliant. Leadfree. DVI-D PIN > Description < DVI-D PIN TMDS DATA - TMDS DATA + 3 TMDS DATA SHIELD 3 6 DDC CLOCK 6 7 DDC DATA 7 9 TMDS DATA TMDS DATA + 0 TMDS DATA SHIELD 4 POWER +5V 4 5 GROUND 5 (+5V & HV SYNC.) 6 HOT PLUG DETECT 6 7 TMDS DATA TMDS DATA TMDS DATA 0 SHIELD 9 TMDS CLOCK SHIELD 3 TMDS CLOCK+ 3 4 TMDS CLOCK- 4 GuidePin ±5mm ±5mm Pin 9 Pin Pin 7 HA-SDM-M Pin 7 Pin 9 Pin Length 000±50mm GuidePin x DVI Male connector (8+) x Black Molded PVC Hood 3 x PAT. NO:US 6,87,48 B RF-BLOK Shielding metal can. 4 4 x Black #4/40 Thumbscrew (slot) 5 UL076 (8AWG x Pair+AL-FOIL+DRAIN) x 4C +(8AWG wire) x 5c +AL-FOIL/MY+Braid Overall; Black PVC Jacket 6 x Black molded ferrite core (4.x8.5x8mm) 7 x White color pad print: "HA-SDM-M" (Hatteland Display typenumber) Tel: (+47) mail@hatteland-display.com - 3/
4 Last Revised: 6 Oct 07 CD07544JHC00FMB-D: Standard VGA 5-pin Male to 5-pin BNC Female Signal Cable. All material are RoHS compliant. Leadfree. Not 46E Approved. 5P DSUB PIN > Description < BNC INNER CORE RED COAX RED INNER CORE GREEN COAX GREEN 3 INNER CORE BLUE COAX BLUE 4 LINK TO OVERALL BRAID Screen 5 NO CONNECTION 6 LINK TO OVERALL BRAID Screen 7 LINK TO OVERALL BRAID Screen 8 LINK TO OVERALL BRAID Screen 9 NO PIN / NO CONNECTION 0 LINK TO OVERALL BRAID Screen LINK TO OVERALL BRAID Screen NO CONNECTION 3 INNER CORE GRAY COAX GREY 4 INNER CORE BLACK COAX BLACK 5 NO CONNECTION PIN PIN 5.8 meter +/- 0cm Item Description x HD5 DSUB, Molded PVC Hood, w/screw, black color 5 x BNC FE, Molded, w/screw, black color 3 x UL99 5 Coaxial, Cable, Black Jacket Color 4 x Heat Shrink Tube ULØ9x0mm, Black Color 5 x Black #4/40 Thumbscrew 6 x PAT. NO:US 6,87,48 B RF-BLOK Shielding metal can. 0.8 ± ± 0.5 SIDE VIEW o4.5 ± 0. o.0 ± 0. o.4 ± 0. o3.8 ± 0. o4.8 ± 0. CENTER CONTACT VIEW o.4 ± 0. o.3 ± 0.05 o3.0 ± 0. o. ± ± ± ±.0 0 ± ±.0 FRONT VIEW.5 ± 0.5 o R.5 Housing Material and Finish Body Brass, nickel plated Spring Steel spring Gasket Metal plate, nickel plated Crimp Ferrule Brass, nickel plated Center Body Brass, nickel plated Center Contact Brass, nickel plated Insulator POM Tel: (+47) mail@hatteland-display.com - 4/
5 Last Revised: 6 Oct : Standard Touchscreen/Serial (RS-3/RS-4/RS-485) 9-pin DSUB Male to Female Cable. DSUB PIN > Description < DSUB FE PIN For actual functionality of each pin, please review appropriate user manual for complete details and specification of signals transferred as factory and/or industrial standards may differ. FE Pin Pin FE Length 000±50mm Pin 9 Pin 5 Pin 5 Pin 9 x DB9 DSUB, Nickel Plated, Insulation color: Blue x DB9 FE DSUB, Nickel Plated, Insulation color: Blue 3 x Out Molded PVC, Color Beige 4 4 x #4/40UNC,E3 Thumbscrew 5 Cable: AWG8,9C++AL/MY,0,D:5.0, Color Beige Tel: (+47) mail@hatteland-display.com - 5/
6 Last Revised: 6 Oct 07 FS-Cable Standard 30VAC Power Cable with grounding. European Type F "Schuko" to IEC. Schuko PIN > Description < IEC FE PIN G Ground (Green Wire) G G G FE 3 3 G FE Length 000±30mm x IEC 6030 C3 Black x CEE 7/7 SCHUKO Right Angle Plug, 6A 50V 3 Cable: 3x0.75mm² Black PVC Tel: (+47) mail@hatteland-display.com - 6/
7 Last Revised: 6 Oct Standard 5VAC Power Cable with grounding. US Type to IEC. US PIN > Description < IEC FE PIN N Neutral (White Wire) N G Ground (Green Wire) G L Live (Black Wire) L FE 0±5mm 4 G N L N G Length 830±50mm L FE x SVT 8/3C 05 C Black, 80±0(YL) x YP- PVC Plastic 35P Black + YP- Inner body 3 x Terminal: 98675BS-/KDF 50T- 4 x ø4.75 Terminal: x YC- PVC Plastic 35P Black, U-Type Terminal: YC- Inner Body 6 x Label: 55 length x 5mm width Tel: (+47) mail@hatteland-display.com - 7/
8 Last Revised: 6 Oct 07 FCE7-EWSS-NO -pin DSUB DC Power Input male plug with screw terminal, suitable for L7DPPK09JSU. FCE7 Series Combo D-SUB connector, W arrangment, socket power contacts, screw termination for AWG wire, through hole mounting, non-fi ltered. All materials are RoHS compliant per EU directive 00/95/EC and amendments. PIN Description Positive + Polarity Negative - Polarity 3 BACK VIEW 3 4 SIDE VIEW TOP VIEW Contact tail end view with screw shown x Shell: Stamped steel, tin plated. x Insert: High temperature resistant thermoplastic, glass reinforced, fl ammability rating ULV94V-0, Black. 3 x Contacts: Copper Alloy, 30μ" [0.76 Microns] gold plated over 50μ" [.7 Microns] minimum nickel. Contact Resistance: 5 milliohm max. Current Rating: 0 amperes max. Insulation Resitance: 3000 megaohms min. 4 x Screws: Steel, nickel or zinc plated or stainless steel. Connector supplied with screws installed. #4-40 UNC Screw, round, pan or fi llister head, Phillips/slotted drive Tel: (+47) mail@hatteland-display.com - 8/
9 Last Revised: 6 Oct 07 L7DPPK09JSU DSUB Plastic housing suitable for FCE7-EWSS-NO. RoHS compliant. Temperature Range: -40 C to 0 C. Attenuation factor: >40 db between 30 MHz and GHz. 4 3 Combined illustration with pin connector (FCE7-EWSS-NO and cover housing (L7DPPK09JSU) x Thumb screws: Steel shaft with plastic top knob, blue chromate plated x Screws: Steel, blue chromate polated, Phillips head (ø5.50mm), 8mm length 3 x Strain relief: Steel, blue chromate plated cable clamp with self-tapping screws 4 x Cover/Shell/Housing: Thermoplastic, UL94-V0 color black ID A B C D E Measurements 3.5mm 8mm 5mm 34mm 49mm Tel: (+47) mail@hatteland-display.com - 9/
10 Last Revised: 6 Oct 07 DVI-4 DVI (+5 pin) Male to RGB/VGA (5-pin HD D-SUB female) signal adapter. DVI PIN > Description < HD5 FE PIN C Analog Red C Analog Green C3 Analog Blue 3 C4 Analog Horizontal Sync. 3 C5 Analog Ground (return for R, 6, 7, 8 G, B signals) 8 Analog Vertical Sync. 4 7 DDC Data 6 DDC Clock 5 4, 6 +5 Power (for standby mode) 9 5 Digital Ground (for +5V and 0, 5 analog sync.) SHIELD SHIELD SHIELD FE C4 C3 C5 C C Pin Pin 4 8 FE 7 Pin 5 Pin 5 x Connector DVI (+5) Male Pins with gold plated. Insulator:Black x Thumb Screws #4-40 UNC Type 3 x Hood PVC Molded Color Black 4 x HEX NUT #4-40 UNC Type 5 x HD5 Female connector with nickel plated. Insulator: Black Tel: (+47) mail@hatteland-display.com - 0/
11 Last Revised: 6 Oct 07 VSD0004-: Standard DisplayPort (DP) to DisplayPort (DP) Signal Cable. DP 0P Male to DP 0P Male. All material are RoHS compliant. Leadfree. Support HBR (Capability of transfering.6 Gbps). Compliant with DisplayPort.. Twisted Pair # Twisted Pair # Twisted Pair #3 Twisted Pair #4 Twisted Pair #5 DP PIN > Description < DP PIN ML_Lane0 (positive) GND 3 ML_Lane0 (negative) 0 4 ML_Lane (positive) 9 5 GND 8 6 ML_Lane (negative) 7 7 ML_Lane (positive) 6 8 GND 5 9 ML_Lane (negative) 4 0 ML_Lane3 (positive) 3 GND ML_Lane3 (negative) 3 GND 3 4 GND 4 5 AUX CH (positive) 5 6 GND 6 7 AUX CH (negative) 7 8 Hot Plug 8 9 Return 9 0 N/C 0 Shell GND/Braid Shell Pin Pin ±5mm Pin 0 Pin 9 VSD0004- R Pin 0 Pin 9 Length 000±50mm Pin Pin x DisplayPort Male Connector with lock. PVC: 60P. INSULATION RESISTANCE: 0M ohm Min/300V DC,0mS. Shielded twisted pair with drain wire. High Density triple metal shielding. UL076 (30AWG*IP+D+AL/ MYLAR)*5C+30AWG*4C+AEB 6.5FMM 3 CONDUCTOR RESISTANCE: ohm Max 4 x White color pad print: "VSD0004- R" (Hatteland Display typenumber) Tel: (+47) mail@hatteland-display.com - /
D-SUBMINIATURE DESCRIPTION/APPLICATION DESIGN ADVANTAGES D-SUB INDEX. IDC Systems D-Subminiature
DESCRIPTION/APPLICATION Fine Pitch D-Sub Connectors are designed for reliable interfaces in modern, high-density applications. Conforms with SCSI 2/3 internal cabling specification. The low-profile design
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
More informationContacts for Full Duplex Ethernet Link
8D Series Twinax & Quadrax Contacts Contacts for Full Duplex Ethernet Link Twinax and Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments.
More informationSave Labor, Reduce Weight and Improve EMI Shielding with Glenair s Micro-D Shielded Cable Assemblies
Single-Ended or Double-Ended These easy-to-order cable assemblies eliminate the need for expensive assembly labor. 00% tested and ready for use. Now With Twisted Pairs No need to create a procurement specification
More informationCOSMTEC. SMA Female to N Female Adapter. RF Connector Technical Data Sheet S-024. Description Minimum Typical Maximum Units
Configuration SMA Female Connectr 1 N Female Connectr 2 50 Ohms SMA Female to N Female Adapter S-024 Features Max VSWR of 1.3:1 up to 18 GHz SMA Interface compliant with MIL-STD-348A N Interface compliant
More informationD-SUBMINIATURE ACCESSORIES
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE ACCESSORIES OVERVIEW FCI s D-Subminiature connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven D-Subminiature
More informationOverall Length
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3004 DRAWING TITLE: ASC2 to SBC(ASC2) I2C Control Cable DRAWING
More information3Pin and Socket Connectors
AMPLIMITE Connectors Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-208 Industrial versions available that use the same manufacturing process of MIL-C-
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 Accessories Introduction Description Accessories is the product classification given by CeramTec for miscellaneous hardware that is used to connect, terminate, install, or isolate Ceramaseal products.
More informationTip Jacks. Johnson Components P.O. Box 1732 Waseca, MN Fax:
.060" (1.5 mm) Shrouded Tip Jack (Solder or Crimp) 5.060" (1.5 mm) Uninsulated Tip Jack (Solder or Crimp) 5.060 (1.50) Shrouded Tip Jack (Solder or Crimp) 5.060 (1.50) Uninsulated Tip Jack (Solder or Crimp)
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
More informationAccessories / Screwlocks
3401-022 Accessories / Screwlocks Product Features Male or female screwlocks Residual magnetism level - Brass parts: NMB (200 Gamma max) - Stainless Steel parts: NMB (200 Gamma max) 1 part number for 1
More informationPhoto. JBX Push Pull Sealed IP68 (Mated) The Solution for both Outdoor and Indoor waterproof applications. Secure for Outdoor applications.
Photo Environmentally Integrated Backshell Sealed Fire JBX proof onnector The Solution for both Outdoor and Indoor waterproof applications Secure for Outdoor applications Waterproof, IP68 (Mated) Reliable
More informationCompact Module. Enhanced Category 5 FTP Cabling System
Compact Module Enhanced Category 5 performance Suitable for Gigabit Ethernet Ultra-slimline design Euro style module Interchangeable with other Euro modules and blanks Individually QA tested Easy to use
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Series 0 Mighty Mouse Triple-Start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Three Shell Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front
More informationFEMALE SOCKET CONNECTORS
PRODUCT DESCRIPTION The Thomas & Betts Female Socket Connectors are designed to mate with a wide variety of Male Headers in PC board applications which require repeated connection and disconnection. The
More information38999 SERIES III HIGH POWER CONNECTOR RANGE. Interconnect Solutions Worldwide
38999 III HIGH POWER CONNECTOR RANGE 38999 III HIGH POWER CONNECTOR The Polamco 38999 High Power Connector range offers a simple and effective way of terminating power cables in a harsh environment military
More informationsuitable with Standard SSPF Panel Sockets (not included):
ENGLISH Datasheet Connector Panel Face-plates Type SSPF - Face Plate panels to suit miniature and standard SSPF panel mount sockets with stainless steel mounting bracket Miniature SSPF Panel (12 way shown):
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ASC1 to SBC(ASC1) I2C Control
More informationDATA NETWORK TECHNOLOGY
DATA NETWORK TECHNOLOGY 236 COPPER COMPONENTS Individual. Dynamic. Adaptive. Solutions for Industry 4.0 the Internet of Things What once seemed a distant and unrealistic goal has now become business as
More information3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
More information3M Interconnect Products
3M Interconnect Products Molded-On Cable Assembles www.ttiinc.com T h e NWeo rvl d e s r L e as d ihn g o Pr a t s s i vo e n & C So non el c ut o tr is po e cn i as l i s t 3M Molded-On Cable Assemblies
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3021
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 DRAWING TITLE: ATIM-C PSU Control Cable MWA-3021 DRAWING NO.: MWACAB-0021
More informationsolutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
More informationThe Industry Source for High-Quality Electronic Products & Assemblies
OVER 300 VARIETIES STOCKED ALLIGATOR CLIPS CROCODILE CLIPS PLIER CLIPS SPECIALTY CLIPS ACCESSORIES PLUGS JACKS A DESCO CORPORATION COMPANY, SINCE 2011 The Industry Source for High-Quality Electronic Products
More informationPEGASUS SERIES GUIDE Amphenol Pcd
GUIDE 2018 Amphenol Pcd Description: The Pegasus Series is Amphenol PCD s latest innovation in small, lightweight, rugged connectors. Designed for use in harsh environments, Pegasus builds on the successful
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationStainless Steel Series MIL-DTL Series III
8D - D38999 Stainless Steel Series Stainless Steel Series MIL-DTL-38999 Series III 39 8D Series - MIL-DTL-38999 Series III Description High contact density Screw coupling Contact protection: 100% Scoop
More informationConnector Panels for Panel Mounting Thermocouple Sockets
Datasheet ENGLISH Connector Panels for Panel Mounting Thermocouple Sockets Miniature Panel: suitable with Miniature Panel Sockets (not included): Standard Panel: suitable with Standard Panel Sockets (not
More informationCable Designs. We take pride in being a total support OEM/ODM cable manufacture
FE Technology is an industry leader in the design, manufacturing, sales, and distribution of OEM custom Cables and Harness. Our organization has over 25 years experience in serving the OEM manufacturers
More informationSMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
More information3M Card Connector SD Normal Polarization, Push-Push, Surfacemount SD Series
M Card Connector SD Low profile, light weight, and small size Compatibility with both SD card and multimedia card formats Smooth push push eject mechanism protect switch indicator Card polarization Card
More informationAmphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
More informationAmphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.
More informationCannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Surface mount compatible PCT insulator
More information3M Round, Shielded/Jacketed, Disc. Wire Cable 26 AWG Solid, Twisted Pair, PVC/PVC 3560 Series
M Round, Shielded/Jacketed, Disc. Wire Cable 26 AWG Solid, Twisted Pair, PVC/PVC 560 Series Twisted pairs reduce crosstalk for balanced drive applications Dual shielding provides 5 db average shielding
More informationCobra. Innovative shielded low profile right angle connector plug and backshell assemblies reduce MIGHTY MOUSE
MIGHTY MOUSE Cobra The Ultra-Low Profile EMI/RFI Plug and ackshell Assembly Innovative shielded low profile right angle connector plug and backshell assemblies reduce clearance requirements without compromising
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More informationTHERMOCOUPLES and THERMORESISTANCES - Temperature measurement sensors for industrial use Figure 1: Standard Thermocouples
THERMOCOUPLES and THERMORESISTANCES - Temperature measurement sensors for industrial use Figure 1: Standard Thermocouples Figure 2: Mineral Oxide Thermocouples Figure 3: Thermoresistances GENERAL CHARACTERISTICS
More informationCONTENT INTRODUCTION. VISION Introduction & Assortment HDMI interconnects Component interconnects SCART interconnects Antenna Interconnects
YOUR CONTENT CONTENT INTRODUCTION 4 VISION Introduction & Assortment HDMI interconnects Component interconnects SCART interconnects Antenna Interconnects 10 12 14 16 18 SOUND Introduction & Assortment
More information3M D Sub EMI Junction Shell Metalized Plastic
M D Sub EMI Junction Shell Metalized Plastic Protection from EMI/ESD Easy assembly reduces time and labor to ensure low applied cost Light weight, compact design Strain relief compensates for multiple
More informationTE Connectivity DEUTSCH DTS Series MIL-DTL Series III Metal Connectors
Applications Features TE Connectivity DEUTSCH DTS Series MIL-DTL-38999 Series III Metal Connectors High-performance military aircraft Commercial aircraft Communications equipment Armored personnel carriers
More informationRibbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
More informationN-Series: High-Temperature Connectors
N-Series: High-Temperature Connectors DIMENSIONS NMHT I/O Cable (Male) NMHT interconnects are used in hightemperature applications. These rugged cable connectors come with a variety of termination, hardware
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: USB3.1 Connector Product Specification GSB4X series A / B type, Receptacle, Thru hole, PCB mount Revisions Control Rev.
More informationCABLEMASTER CABLE GUIDE
CABLEMASTER COAXIAL, DATA, TELEPHONE & SPECIAL CABLES CABLE GUIDE REFERENCES: FOXTEL F10231, F30128 OPTUS SAP17874, SAP4868 AS/ACIF S008:2001 N2020 Skandia Pty Ltd Issue: 2.0 Revision: 1 Date of issue:
More informationRF Coaxial Connectors, Adapters and Kits
RF Coaxial Connectors, Adapters and Kits Pomona has everything from a single reliable RF adapter to versatile kits packaged in lightweight, foam padded cases containing all the connections and terminations
More informationD*M High Density 104 Contacts 90 Bent PCB Terminations
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with ot without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationPhysical. Electrical. Environmental. Insulation: Contact: Plating: Shroud: Temperature Rating: -55 C to +85 C
M I/O Interconnect System 2.0 mm for IEEE 194 Right Angle, Horizontal, Through-Hole Plug (Male) E106 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support
More information3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information.050" 4 thru 25 Contacts
.050" 4 thru 25 Contacts MM-11... MM-12... MM-12, MK-16, MK-18 receptacles MM-11, MK-15, MK-17 plugs PAGE 1 OF 4 PAGES BODY CONTACTS OPTIONS SERIES SIZE HARDWARE MM.050" Rugged Metal I/O Connector (MM
More informationSTANDARD COAXIAL CONNECTORS
STANDARD COAXIAL CONNECTORS COAXI-KIT ISO 9001 APPROVED RADIALL COMPANY PROFILE Since 1952, RADIALL has specialized in the field of coaxial connectors and cables assemblies. RADIALL s experience and high
More informationEasy assembly with standard tools. Fully insulated for direct mounting to steel panels. Threaded stud and
1496-1497.qxp 12/16/2013 8:44 PM Page 1497 Cam-Lok J Series Connectors or NEMA 4 Cam-Lok J Series Connectors are specifically designed to meet the needs of demanding portable applications. J Series Plugs
More information8D Series MIL-DTL Series III
8D Series MIL-DTL-38999 Series III 8D Series - MIL-DTL-38999 Series III Contents Overview Common Section MIL-DTL-38999: A universal product platform... 04 8D Series - Presentation... 05 Product overview...
More information56-SDMS-01 REV. 01 SPECIFICATIONS FOR
56-SDMS-01 REV. 01 SPECIFICATIONS FOR 13.8KV UNIT SUBSTATIONS This specification is property of SEC and subject to change or modification without any notice CONTENTS PAGE No. 1.0 SCOPE 3 2.0 CROSS REFERENCES
More information3M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug
M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug 61 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support to solder joints and help
More information1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
More information3M Serial Advanced Technology Attachment (SATA) Connector
M Serial Advanced Technology Attachment (SATA) Connector 22-position signal and power combination Input/ouput connector for backplane applications EMLB contacts for "hot swap" Blind mate polarization for
More informationThe UK s Leading Supplier LUMINUS
The UK s Leading Supplier LUMINUS GUIDE 2018 Description: Amphenol LTD is excited to become the UK s leading supplier of the Luminus series. The product was originally designed by our sister division Amphenol
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. STARTING SERIAL NUMBER
(7x) 48 4 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. 7 7 2788-20 77 83(3x) STARTING SERIAL NUMBER 144 79 G7A REVISED BULLETIN
More information8D Series. MIL-DTL Series III
MIL-DTL-38999 Series III MIL-DTL-38999 Series III Contents Overview A universal product platform... 06 8D Series - Presentation... 07 Product overview... 08 A superior concept... 09 A performing MIL standard
More informationSMB Flexible Cable Connector Index
SMB Flexible Cable Connector Index Right Angle Crimp Type Bulkhead Jack... 5 Right Angle Crimp Type Plug... 3 Specifications... 2 Straight Crimp Type Bulkhead Jack... 5 Straight Crimp Type Jack... 4 Straight
More informationSERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G96A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-059 77 83(3x) STARTING SERIAL NUMBER 79 G96A Torque Chart on
More informationELECTRONICS. D-Subminiatures Connectors and accessories WEB Product Catalogue. (2008 August revision)
ELECTRONICS D-Subminiatures Connectors and accessories WEB Product Catalogue (2008 August revision) FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries and sales of 1.3 billion euros
More informationAVX Specialty Catalog
AVX Specialty Catalog MOBO Connectors www.avx.com Version 16.4 Table of Contents BATTERY ORS........................................................... 2-35 Standard 2.5mm Pitch 9155-000.............................................
More informationFieldLink for PROFIBUS Applications
FieldLink for PROFIBUS s The Automation & Drives business unit of LEONI has developed FieldLink bus cables in accordance with the PROFIBUS specifications. The FieldLink bus cable product range for PROFIBUS
More informationSolutions for Electronic Specialty Markets (ESM)
M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets M Electronic Specialty Markets - New Product Releases
More information150 mm. 1/8 BSPP brass male compression fitting with locknut included
ENGLISH Datasheet Platinum Resistance PT100 Flat Tip Probe 4mm diameter x 150mm long 2 wire with 1 metre flying lead, complete with 1/8 BSP compression fitting & locknut 4mm 25mm 5.5/6mm(max) 150 mm General
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 6
Amphenol Amphenol Taiwan Corporation Sheet 1 of 6 Title: Part Number: Description: Mini SAS HD Integrated Connector Product Specification G40H series Mini SAS HD Integrated Connector, 0.75 Pitch, R/A,
More information3M Molded Socket for.050 Pitch Cable, Cable Assembly Connector 871 Series
3M Molded Socket.100.100 for.050 Pitch Cable, Cable Assembly Connector 871 Series Part of a complete cable assembly Mates with industry standard 0.025 inch square contacts on.100 inch x.100 inch centers
More informationRJ Vista. EMI Quiet. Right Angle. Top Entry
www.rjvista.com Contents Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
More informationheavy mate D Rated voltage 250 V Rated current 10 A A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128
heavy mate D Rated voltage 250 V Rated current 10 A... 16 A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128 22 heavy mate D Brief information Approvals, Testhouse Characteristics Approval-Number
More information3M Eurosocket Type C (Rows A & C or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationEMI ESSENTIALS ELECTROSEAL CONDUCTIVE ELASTOMER MATERIAL
ELECTROSEAL CONDUCTIVE ELASTOMER MATERIAL SHEET MATERIAL The Table below lists thicknesses and sizes for our molded sheet material, while Table 3, page 82, shows the compounds available for all of our
More information8D Series. MIL-DTL Series III. Connection Technologies
MIL-DTL-38999 Series III Connection Technologies MIL-DTL-38999 Series III Contents Overview A universal product platform... 06 8D Series - Presentation... 07 Product overview... 08 A superior concept...
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/138C 10 September 2018 SUPERSEDING MIL-DTL-55302/138C 24 March 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN, 160 CONTACT POSITIONS,
More informationMAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
More informationBulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
More information3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing
More informationloop 0.60 mh/km 0.65 mh/km RCCY031/032 /KS1 RCCY031/032 /NS mh/km 0.70 mh/km RCCY033/034 /KS1 RCCY033/034 /NS1
Drawings Models RCCY031, RCCY032, RCCY033, RCCY034 Coriolis Mass Flow and Density Meter Remote Cable Specification: Li2Y(St)/CY 3x2 AWG24 + 1x3 AWG20, pair/triple shielded; pair/triple twisted; overall
More informationSERVICE PARTS LIST DEEP CUT BANDSAW D51B BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT BANDSAW CATALOG NO. 232-20 SERVICE PARTS LIST STARTING SERIAL NO. D5B REVISED BULLETIN
More information2M801 2M803 2M804 2M805. Type Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread # of Contacts 1 to to 55 1 to 55 1 to 130
M Series SMALLER, LIGHTER-WEIGHT ALTERTIVE FOR D8 PERFORMANCE M SERIES Amphenol M micro-miniature connectors are a small, lightweight option for mil-spec performance that can withstand harsh environments.
More informationRECTANGULAR INFINITE POSSIBILITIES. Amphenol. Rectangular and Filtered Products. Micro-D. D-Sub. Rectangular and JN1122 ARINC 404
INFINITE POSSIBILITIES. Amphenol Micro-D D-Sub Rectangular 38999 83733 and JN1122 Rectangular and Filtered Products ARINC 404 ARINC 600 AMPHENOL MICRO-D Amphenol Phoenix Interconnect Micro Connectors provide
More informationSERVICE PARTS LIST DEEP CUT BANDSAW D51C BULLETIN NO CATALOG NO SEE PAGE 3 FOR FASTENER TORQUE CHART
= Part number change from previous service parts list. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS DEEP CUT BANDSAW CATALOG NO. 232-20 SERVICE PARTS LIST STARTING SERIAL NO. D5C REVISED BULLETIN
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 oardmount Through-Hole R. A. Condo Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction
More informationSPECIFICATIONS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
NEW! Series TK SPECIFICATIONS: CONTACT RATING: 200mA / 1.5A @ 5~30VDC. ELECTRICAL LIFE: 1 million cycles at full load. CONTACT RESISTANCE: 20m-ohms max. INSULATION RESISTANCE: 600VDC 10M-ohms min. ESD
More information3M Four-Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
M Four-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 000 Series Military (with M s 518 & N518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing
More informationLSA-PLUS Series 2. Connection and Disconnection Modules and Accessories. 1 st Edition
LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories 1 st Edition LSA-PLUS Series 2 Connection and Disconnection Modules and Accessories A technically and commercially superior quick
More informationThermal Solutions Worldwide SECTION C. Industrial Thermocouples and RTDs. Straight Thermocouples Assemblies with Metal Protection Tubes C-5
Thermal Solutions Worldwide SECTION C Industrial Thermocouples and RTDs Straight Base Metal Thermocouple Elements C1 Angle Base Metal Thermocouple Elements C2 Straight Noble Metal Thermocouple Elements
More information3M Wiremount Socket Position for.050 Pitch Cable 79 Series
3M Wiremount Socket.100.100 64 Position for.050 Pitch Cable 79 Series Standard profile plastic strain relief Mates with 3M headers, plugs, and pin strips for quick connect/disconnect capability Centerbump
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Wiremount Socket.100.100 for.050 Pitch Cable 891 Series Preassembled, terminates
More information3M Pak 50 Stacking Compression Connector 130 Position 388 Series
Pak 50 Stacking Compression Connector No solder joints, compression stacking connector Standardized interface for Intel Modular Interface extension (MIX) Bus (module to module and module to baseboard connector)
More informationThis product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update.
AFC Cable Systems, Inc. Product Specification This product specification is written according to the Construction Specifications Institute MasterFormat, 2014 Update. SECTION 260519.13 METAL CLAD CABLE-MC
More informationSection B Micro-D Metal Shell Connectors for Harness Applications
Section Micro-D Metal Shell Connectors for pplications Micro-D product selection guide MWDM Solder Cup Connectors lways in stock, these connectors feature gold-plated solder cup contacts for termination
More informationCCV15 2 COPPER CONNECTIVITY. 1 1 LSA Modules & Accessories C1 C IDC Modules & Accessories C5 C MDF Terminal Blocks & Accessories C8
PRODUCT CATALOG COPPER CONNECTIVITY CONTENTS 1 1 LSA Modules & Accessories C1 C4 1 2 IDC Modules & Accessories C5 C7 1 3 MDF Terminal Blocks & Accessories C8 1 4 MDF Protections C9 1 5 xdsl Splitters C10
More informationCoaxial Cables for Broadband Communication Networks European Edition
Belden Coaxial Cables for Broadband Counication Networks European Edition Belden Coaxial Cables for Broadband Dependable Solutions in Cabling Better by design Our strategic objective is to provide our
More informationStandard Connectors. MD Series NEW
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information