SKID-LOCK UNITIZING SYSTEMS
|
|
- Shana Jones
- 6 years ago
- Views:
Transcription
1 PRESENTS
2 SKID-LOCK UNITIZING SYSTEMS UNITIZING WITHOUT WASTE! The Gluefast Company, Inc. Neptune, New Jersey USA
3 SKID-LOCK CAN REDUCE OR ELIMINATE THE NEED FOR: STRETCH WRAP STRAPPING CORNER BOARDS
4 REDUCING SOLID WASTE AND PRESERVING OUR ENVIRONMENT
5 UNITIZING WITHOUT WASTE! SKID-LOCK UNITIZING SYSTEMS
6 Introduction SKID-LOCK - A water based adhesive system that can reduce or eliminate the need for stretch wrap, strapping or corner boards!
7 Introduction SKID-LOCK - A water based adhesive system that can reduce or eliminate the need for stretch wrap, strapping or corner boards! SKID-LOCK is applied on the top of cartons, paper or plastic bags, forming a bond that holds during shipping but is easily removed by pulling upwards when depalletizing.
8 Introduction SKID-LOCK - A water based adhesive system that can reduce or eliminate the need for stretch wrap, strapping or corner boards! SKID-LOCK is applied on the top of cartons, paper or plastic bags, forming a bond that holds during shipping but is easily removed by pulling upwards when depalletizing. Manual and automatic applicators available.
9 UNITIZING WITHOUT WASTE! Paper mill with reams of paper unitized with SKID-LOCK
10 UNITIZING WITHOUT WASTE! SKID-LOCK Applicator unitizing shrink wrapped aseptic juice boxes
11 UNITIZING WITHOUT WASTE! Multi-wall paper bags unitized with SKID-LOCK No stretch wrap needed!
12 Five Most Frequently Asked Questions SKID-LOCK UNITIZING SYSTEMS
13 HOW DOES SKID-LOCK WORK? SKID-LOCK UNITIZING SYSTEMS
14 HOW DOES SKID-LOCK WORK? SKID-LOCK contains a resin which provides the bond.
15 HOW DOES SKID-LOCK WORK? SKID-LOCK contains a resin which provides the bond. A release agent in SKID-LOCK prevents deep penetration of the resin into the substrate.
16 HOW DOES SKID-LOCK WORK? SKID-LOCK contains a resin which provides the bond. A release agent in SKID-LOCK prevents deep penetration of the resin into the substrate. The bond formed has high shear strength (side to side) and low tensile strength (up & down).
17 HOW DOES SKID-LOCK WORK? IS SKID-LOCK SAFE? SKID-LOCK UNITIZING SYSTEMS
18 IS SKID-LOCK SAFE? SKID-LOCK is water based.
19 IS SKID-LOCK SAFE? SKID-LOCK is water based. It contains no known hazardous chemicals and its ingredients conform to FDA spec for use in Food Packaging Adhesives.
20 IS SKID-LOCK SAFE? SKID-LOCK is water based. It contains no known hazardous chemicals and its ingredients conform to FDA spec for use in Food Packaging Adhesives. SKID-LOCK is repulpable.
21 HOW DOES SKID-LOCK WORK? IS SKID-LOCK SAFE? HOW IS SKID-LOCK APPLIED? SKID-LOCK UNITIZING SYSTEMS
22 HOW IS SKID-LOCK APPLIED? Two stripes of SKID-LOCK are applied as shown on the carton below:
23 HOW IS SKID-LOCK APPLIED? Two stripes of SKID-LOCK are applied. Gluefast has simple squeeze bottles or pressure tanks to quickly and efficiently apply SKID-LOCK manually.
24 HOW IS SKID-LOCK APPLIED? Two stripes of SKID-LOCK are applied. Gluefast has simple squeeze bottles or pressure tanks to quickly and efficiently apply SKID-LOCK manually. SKID-LOCK is extruded in a bead or sprayed, depending on the application.
25 HOW IS SKID-LOCK APPLIED? Gluefast also offers two fully automatic SKID-LOCK applicators: An entry level system with optional skip-glue pattern for adhesive savings.
26 HOW IS SKID-LOCK APPLIED? An advanced system with a programmable logic controller (PLC) featuring an optional skip-glue pattern, ability to apply no SKID-LOCK on the top layer of items, item counters, and programmable pallet configuration for easy product changes.
27 HOW DOES SKID-LOCK WORK? IS SKID-LOCK SAFE? HOW IS SKID-LOCK APPLIED? CAN SKID-LOCK ELIMINATE STRETCH WRAP, STRAPPING AND CORNERBOARDS? SKID-LOCK UNITIZING SYSTEMS
28 CAN SKID-LOCK ELIMINATE STRETCH WRAP, STRAPPING, AND CORNERBOARDS? YES, IF... All Items are of uniform size on the pallet. Minimum 10 lb./ft 2 (.5 kg/m 2 ) per item. Minimum pallet load of 1000 lbs.. (450 kg)
29 CAN SKID-LOCK ELIMINATE STRETCH WRAP, STRAPPING, AND CORNERBOARDS? YES, IF... All Items are of uniform size on the pallet. Minimum 10 lb./ft 2 (.5 kg/m 2 ) per item. Minimum pallet load of 1000 lbs.. (450 kg) SKID-LOCK should be dry before entering a freezer. Pallet load should be interlocking (cross-stacked) as shown here.
30 For columnar stacked pallet loads, using SKID-LOCK with a reduced amount of stretch wrap provides a more stable load, reducing or eliminating damage during shipping. SKID-LOCK UNITIZING SYSTEMS
31 HOW DOES SKID-LOCK WORK? IS SKID-LOCK SAFE? HOW IS SKID-LOCK APPLIED? CAN SKID-LOCK ELIMINATE STRETCH WRAP, STRAPPING, AND CORNERBOARDS? HOW DOES THE COST OF SKID-LOCK COMPARE TO THE COST OF USING STRETCH WRAP? SKID-LOCK UNITIZING SYSTEMS
32 HOW DOES THE COST OF USING SKID-LOCK COMPARE TO THE COST OF USING STRETCH WRAP? SKID-LOCK can result in savings of up to 50% when compared to stretch wrap!
33 HOW DOES THE COST OF USING SKID-LOCK COMPARE TO THE COST OF USING STRETCH WRAP? SKID-LOCK can result in savings of up to 50% when compared to stretch wrap! STRETCH WRAP COST $.20 - $.60 / PALLET SKID-LOCK COST $.10 - $30 / PALLET
34 HOW DOES THE COST OF USING SKID-LOCK COMPARE TO THE COST OF USING STRETCH WRAP? SKID-LOCK can result in savings of up to 50% when compared to stretch wrap! Even when stretch wrap is required, a reduced amount of wrap used with SKID-LOCK can reduce costs and increase load stability!
35 SKID-LOCK Consumption DOLLAR COST PER PALLET All Cartons Glued, Full Glue Pattern Top Tier Not Glued, All Others Full Glue Pattern Top Tier Not Glued, All Others Skip Glue Pattern Stretch Wrapped 0 CARTON LENGTH 16 INCHES, (40 CM) 56 CARTONS PER PALLET
36 Test SKID-LOCK in your factory! Gluefast can determine your SKID-LOCK costs based on your pallet configuration. SKID-LOCK UNITIZING SYSTEMS
37 Test SKID-LOCK in your factory! SKID-LOCK can protect your shipment!
38 Test SKID-LOCK in your factory! SKID-LOCK can protect your shipment! SKID-LOCK can save you money!
39 Test SKID-LOCK in your factory! SKID-LOCK can protect your shipment! SKID-LOCK can save you money! SKID-LOCK can help reduce solid waste by reducing stretch wrap consumption!
40 GLUEFAST HAS DISTRIBUTION Throughout the United States! And Around the World!
41 UNITIZING WITHOUT WASTE! SKID-LOCK UNITIZING SYSTEMS
42 For more information... Call, FAX, write, or to: The Gluefast Company, Inc Route 66, Building #1 Neptune, NJ USA Phone from outside USA Toll Free Phone in USA FAX / info@gluefast.com WEB PAGE URL
43 THE END SKID-LOCK UNITIZING SYSTEMS Version LM
PACKAGING GUIDE FOR SHIPPERS CLAIMS-FREE SERVICE TAKES A TEAM EFFORT.
PACKAGING GUIDE FOR SHIPPERS CLAIMS-FREE SERVICE TAKES A TEAM EFFORT. How to properly package freight and prevent damage in transit In the LTL shipping environment, freight is transported across regions
More informationThe entire document shall be read and understood before proceeding with a test. ISTA 3B Page 1 of 35
Packaged-Products for Less-Than-Truckload (LTL) Shipment ISTA 3 Series General Simulation Performance Test PROCEDURE VERSION DATE Last TECHNICAL Change: MARCH 2017 Last EDITORIAL Change: MARCH 2017 For
More informationNA Supplier Packaging Standards
NA Supplier Packaging Standards > 3-31-15 Rev 1 Table of Contents Section 1: Goals & Objectives Section 2: Packaging Development and Quoting, Ideal Time-line Section 3: Supplier
More informationYour palletizing solution
palletizing solutions For small capacity packers Compact and versatile Reduced labor / High return on investment Your palletizing solution The VPM-5 is most suitable for small capacity packers who want
More informationYour palletizing solution. Specifications VPM-8
For medium-sized packing plants Fully automatic and versatile Reduced labor / High return on investment Your palletizing solution Fully automatic palletizing begins with the VPM-8 which is standardly equipped
More informationThe Wrapper Experts! 220 Bayview Drive, Unit 16
The Wrapper Experts! 220 Bayview Drive, Unit 16 www.wrapperexperts.com Barrie, ON L4N 4Y8 Canada info@wrapperexperts.com Tel: 705-719-0055 Fax: 705-739-0056 Request For Quotation - Stretchwrapper Toll
More informationNORTH AMERICA PACKAGING GUIDELINES FOR SUPPLIERS
North America NORTH AMERICA PACKAGING ZF TRW PROCEDURE REVISIONS Date Release No. Description Revision Engineer May 12, 2006 ERD170420 Initial release A Mark Rausch January 25, 2016 ERD 399955 Updated
More informationIncoming Shipment Material Bar Coding, Product Labeling and Palletizing Requirements
Incoming Shipment Bar Coding, Product Labeling and Palletizing Requirements LBL-0101 Revision: 21 18 July, 2014 Document Status: APPROVED Dave Rubin Abstract: The Purpose of this document is to provide
More informationCustomer Packaging Guidelines
Customer Packaging Guidelines Customer Packaging Guidelines 05.02.16 v1 CONTENTS Introduction Packaging Tips: Parcels Envelopes Packaging Tips: Pallets Crates Drums Pipes Spools & Reels Packaging Tips:
More informationNA Supplier Packaging Standards
NA Supplier Packaging Standards > 3-31-15 Table of Contents Section 1: Goals & Objectives Section 2: Packaging Development and Quoting, Ideal Time-line Section 3: Supplier Responsibilities
More informationPARKING LOT SEALANT. For additional information contact your Authorized Crafco Representative Product Data Sheets
PARKING LOT SEALANT Due to the nature of vehicle and pedestrian traffic on parking lot pavement, special care should be taken when selecting sealant for these areas. These areas encounter different types
More informationYour palletizing solution
palletizing solutions For medium-sized packing plants Fully automatic and versatile Reduced labor / High return on investment Your palletizing solution Fully automatic palletizing begins with the VPM-8
More informationInspection Insure that the product meets all requirements of the McNICHOLS purchase order. Report any non conformance before shipment.
McNICHOLS Co. 2502 North Rocky Point Drive - Suite 950, Tampa, FL 33607 Dear Valued Supplier, Please review our. If any exceptions are required, please communicate them along with your acknowledgement
More informationInstallation Guide April 2017
Installation Guide April 207 3M Fire and Water Barrier Tape Installation: Wall to wall Install mineral wool into the straight wall to wall gap. Peel back one corner of the liner to expose tape and adhere
More information659 VAN METER STREET CINCINNATI, OH Phone: Fax: Website:
659 VAN METER STREET CINCINNATI, OH 45202 Phone: 513. 241. 1230 Fax: 513. 241. 1287 Website: www.hixson-inc.com Email: info@hixson-inc.com IN-HOUSE EXPERTISE At Hixson, it is not enough to offer only a
More informationSPECIFICATIONS FOR AluSystems Aluminum Composite Panels Series 20 Dry Joint 1.00 GENERAL 1.01 RANGE OF WORK Section includes: Laminated panels and attachment systems for use as exterior cladding. A. Provide
More information(Rev. 2000) STANDARD
202-96 (Rev. 2000) STANDARD For Flexible Fiber Glass Insulation to be Laminated for Use in Metal Buildings www.naima.org NAIMA 202-96 STANDARD (Rev. 2000) For Flexible Fiber Glass Insulation to be Laminated
More informationSECTION 15 CARTON REQUIREMENTS
SECTION 15 CARTON REQUIREMENTS CARTON REQUIRMENTS OVERVIEW 1. Carton Labels are required on all shipments from all vendors 2. We suggest as a best practice extra taping on your cartons. It guards against
More informationPackaging Guidelines for Shipping Freight
Packaging Guidelines for Shipping Freight At FedEx, we know proper packaging of your freight is the best way to ensure that your goods arrive safely at their destination. So we offer these guidelines for
More informationMaterials Reference Guide. Printing & Packaging Requirements for Production Materials
Materials Reference Guide Printing & Packaging Requirements for Production Materials Table of Contents DST Output Services... 3 Calling DST Output... 3 Printing & Packaging Requirements for Production
More informationGuideline Specifications
Page 1 of 7 PART 1 Guideline Specifications Exterior Aluminum/Composite Wall Panels GENERAL ARROWHEAD 508 SYSTEM Pressure Equalized Rainscreen SECTION 07410 1.01 SUMMARY A. Work of this section included
More informationCanada Freight Routing Guide
Canada Freight Routing Guide Destination: Beach Mold and Tool, Inc. Corporate New Albany, IN USA Beach Mold and Tool, Inc. Corporate Logistics/Traffic 999 Progress Blvd. New Albany, Indiana 47150 USA Telephone:
More informationSTRAP & CORNER PROTECTORS / STRAP STAPLES PLASTIC STRAPPING DISPENSERS
PLASTIC STRAPPING Complete Packaging Products offers all varieties of Plastic Strapping; Poly Cord, Polyester and Polypropylene. To utilize your plastic strapping we carry a broad range of Strapping Tools.
More informationSection 6 Carton Packing, Packaging, Labeling, Shipping & Loading Requirements
Packing and Packaging Guidelines Tens of Thousands of cartons are received daily in each of our service centers. In order to expedite the receiving of these cartons and maintain a high level of accuracy
More informationDomestic Shipping Guide
1.0 Introduction 1.1 Purpose: These guidelines advance standardization of procedures to shorten, simplify and reduce total time and cost in the supply chain. They promote ease of doing business between
More informationPILOT PICK TO CARTON OR TOTE TRAY SYSTEM SEMI-AUTOMATIC SYSTEM JANUARY, 2016
PILOT PICK TO CARTON OR TOTE TRAY SYSTEM SEMI-AUTOMATIC SYSTEM JANUARY, 2016 CONTENTS A. WHY SEMI-AUTOMATION? B. LSRS SHELF AND BIN CALCULATION EXAMPLE C. PICK SKU TO CARTON OR TOTE TRAY SEMI- AUTOMATIC
More informationPACKAGING SOLUTIONS. Nordson delivers the right adhesive dispensing technologies to keep you productive and profitable.
PACKAGING SOLUTIONS Nordson delivers the right adhesive dispensing technologies to keep you productive and profitable. Customer commitment to develop superior packaging solutions. The Nordson ability to
More informationVehicle Control Systems An American Standard Company. Packaging and Labeling Requirements Manual for all suppliers
Vehicle Control Systems Packaging and Labeling Requirements Manual for all suppliers TABLE OF CONTENTS 1. INTRODUCTION... 3 1.1. SCOPE AND GENERAL MEANING... 3 1.2. REQUIREMENT... 3 1.3. PROBLEM RESOLUTION...
More informationEPEAT CONFORMITY ASSESSMENT PROTOCOLS 4.8 Packaging
4.8.1 Toxics in packaging EPEAT CONFORMITY ASSESSMENT PROTOCOLS 4.8.1.1 Required Reduction/elimination of intentionally added toxics in packaging Verification Guidance IEEE Interpretations and PVC Verification
More informationPlease Review page 4 for Style Separation. Violation charges for this requirement will not be in effect until October 1 st 2009.
FORMAN MILLS DISTRIBUTION CENTER PENNSAUKEN, N.J. To: From: All Forman Mills Vendors Attn: Distribution and Shipping Department DC Routing Department Subject: Routing Guide Effective Date: July 2009 Attached
More informationTrusted ICC ES. Conformity! Look. Evaluation. ICC-ES Evaluation
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg ESR 3288 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 03 00
More informationLow-profile, 11U high cabinets hold networking equipment, servers, and phone equipment.
RM140A-R3 RM140A-M-R3 RM145A-R3 RM145A-M-R3 Small Office/Home Office (SOHO) Cabinets Low-profile, 11U high cabinets hold networking equipment, servers, and phone equipment. Fit under most desktops in the
More informationVCP Haband Requirements Revision #: 06
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoeboxes, hang tags and other packing materials from
More informationPackaging and Preservation:
1 of 4 This specification is provided to inform vendors of Raytheon Systems Company's minimum packaging requirements. This document is superseded by any special requirements listed on drawings or specifications.
More informationWritten by: Lyndsay Flynn Date: 19 Sept 13 Approved by: Sarah Winslet Date: 19 Sept 13 Page 1
VCP JD Sports Fashion PLC T/A Blacks Account Numbers: 158575 / 158578 / 158579 / 158580 / 158581 Blacks Outdoor T/A Millets Account Number :168716 UK - MERRELL Requirements Revision #: 03 1. GENERAL REQUIREMENTS
More informationDaimler Trucks North America
Daimler Trucks North America Packaging & Labeling Requirements For Aftermarket Parts PD484 (11/17) Table of Contents Preface Introduction 1.0 Compliance 2.0 Environmental Considerations 3.0 Packaging Responsibilities
More informationTORNADO DOOR SERIES Model FEMA 361
TORNADO DOOR SERIES Model FEMA 361 This Door Stands Up to Tornado Force Winds And Protects With Higher Security Features Lower Bolt Panic Bar Adjustable Hinges Feature: Benefit: Panels: Manganese Plate
More informationPackaging Guide. Updated May 2012
Packaging Guide Updated May 2012 Contents Introduction... 3 Policy Statement... 3 Carton Packaging and Packing Standards... 3 Board Grade... 3 Pallet Configuration... 4 Weight and Dimension... 6 Large
More informationCC-1004 Ultra High Temperature Epoxy Adhesive
CC-1004 Ultra High Temperature Epoxy Adhesive PRODUCT DESCRIPTION TYPICAL USES Blome CC-1004 is a two part, high temperature, epoxy adhesive used for the installation of abrasion resistant brick and tile
More informationGHSP Supplier Packaging Requirements and Guidelines
Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data June, 2008 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationOptiLedge Implementation Handbook
OptiLedge Implementation Handbook Page 1 The Index Introduction to the OptiLedge 3 OptiLedge Product Sheets 4 OptiLedge Specifications 5 OptiLedge Load Capacities 5 Solution Development and the Implementation
More informationVCP WWW US Warehouse Requirements Revision #: 08
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for product construction and labeling information. Vendors must purchase all shoeboxes, hang tags and other packing materials from
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes Technical Data January, 2002 Product Description 4004 1/4 in. (6.4 mm) Double-Coated Urethane Foam Tape 4008 1/8 in. (3.2 mm) Double-Coated Urethane Foam Tape 4016 1/16
More informationGuidelines for shelf ready packaging Coop Norden. Dry Goods
Guidelines for shelf ready packaging Coop Norden Dry Goods For standard range product presentations on shelves and on pallets as well as campaign presentations of standard range products on pallets or
More informationQUALITY CONTROL PROGRAM OUTLINE
QUALITY CONTROL PROGRAM OUTLINE GENERAL Scope The following describes parameters for the manufacture, supply, and installation of SKAPS Industries Drainage Net and Geocomposite. SKAPS Industries is dedicated
More informationSupplier Requirements Retail Information Svcs LLC Fastener Division
Supplier Requirements Retail Information Svcs LLC Fastener Division REVISION : 1 PAGE 1 of 11 TABLE OF CONTENT SECTION PAGE Supplier Evaluation and Selection Process 3 Supplier Performance Evaluation 4
More informationReceiving Guide. How to send products to a Shipwire-enabled Ingram Micro fufillment center RECEIVING GUIDE RECEIVING GUIDE
Receiving Guide How to send products to a Shipwire-enabled Ingram Micro fufillment center RECEIVING GUIDE RECEIVING GUIDE Contents 3 Introduction 4 Before You Ship: Checklist 6 Packaging 8 Fragile Products
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationUNITIZATION PROCEDURES FOR 5.56MM OR 7.62MM CARTRIDGES PACKED IN SURE-PAK CONTAIN- ERS FOR INTRA-THEATER GROUND MOVEMENT ONLY
UNITIZATION PROCEDURES FOR 5.56MM OR 7.62MM CARTRIDGES PACKED IN SURE-PAK CONTAIN- ERS FOR INTRA-THEATER GROUND MOVEMENT ONLY NOTICE: THE PROCEDURES DELINEAT D IN THIS DRAWING ARE FOR INTRA-THEATER GROUND
More informationGeneral Packaging Guidelines
General Packaging Guidelines At FedEx, we know proper packaging can help ensure that your shipments arrive safely. So we offer general packaging guidelines from measuring and weighing your package, to
More informationGHSP Supplier Packaging Requirements and Guidelines
Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns
More informationMATERIAL SPECIFICATION RIGID FOAM; CLOSED CELL POLYMETHACRYLIMIDE (PMI)
Proposal of a specification MATERIAL SPECIFICATION RIGID FOAM; CLOSED CELL POLYMETHACRYLIMIDE (PMI) Contents 1 SCOPE Page 2 1.1 Scope Page 2 1.2 Classification Page 2 2 APPLICABLE DOCUMENTS Page 3 3 REQUIREMENTS
More informationPlease mark reference [R] and options [opt.] Line Speed
Subject area: Terminology ethod sheet: Recommended Inquiry for Estimate Sheet no.: 1.01 Date: July 2009 = ust (obligatory) Customer Adress Company Adress City Post code Purchasing location ain contact
More informationGLOBAL DISTRIBUTION PACKING STANDARDS
GLOBAL DISTRIBUTION PACKING STANDARDS Packing Standards for the US and UK Elsevier Distribution Centers www.elsevier.com/vendor-guide Updated February 2014 1. CARTON PACKAGING REQUIREMENTS... 3 A) STANDARD
More informationJob Approvals Date Originator: N. Holdeman 02/23/99 Hughes Network Systems Approved: Checked: Title: Supplier Bar Code Labels Specification
Date Rev Revision Record Approved 02/23/99 1 Initial Release 03/16/99 A Production release 10/11/99 B INC ECN 59127 3/30/00 C INC ECN 59502 4/27/00 D INC ECN 59572 2/17/01 E INC ECN 60325 5/13/09 F INC
More informationGUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS
GUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION OF THE UNITED NATIONS - ii - GUIDELINES FOR THE PACKAGING AND STORAGE OF PESTICIDES FOOD AND AGRICULTURE ORGANIZATION
More informationNSK Steering Systems America
PAGE NO: 1 of 13 NSK Steering Systems America Supplier Logistics and Packaging Manual PAGE NO: 2 of 13 Table of Contents 1 Scope... 3 1.1 General... 3 2 Communication... 3 2.1 Supplier contacts... 3 2.2
More informationOVERVIEW OF PROCEDURE 2A
Packaged-Products 150 lb (68 kg) or Less 2A 2 008 ISTA 2 Series Partial Simulation Performance Test Procedure VERSION DATE Last TECHNICAL Change: JANUARY 2008 Last EDITORIAL Change: JANUARY 2008 For complete
More informationQuality Service Experience Complete Systems From One Source
Quality Service Experience Complete Systems From One Source Pack Pneumatic & Impeller Type Packers and Automatic Bag Placing Systems for Valve Bags Palletize Conventional and Robotic Type Systems to handle
More informationSignatory Name: Brown Forman Australia Pty Ltd
Signatory Name: Brown Forman Australia Pty Ltd The question numbers in this report refer to the numbers in the report template. t all questions are displayed in this report. Status: Complete The content
More informationUNISHIPPERS GUIDE TO HOLIDAY FREIGHT SHIPPING. It s the happiest (and busiest) shipping time of the year. Which means that now is the
UNISHIPPERS GUIDE TO HOLIDAY FREIGHT SHIPPING It s the happiest (and busiest) shipping time of the year. Which means that now is the best time for small and mid-sized business owners to start thinking
More informationLP OSB Sheathing & Structural 1 Sheathing
Rated OSB Sheathing Roof Panels Span Ratings Max. Live Load Thickness Span Rating for Roofs (lbs)** 3/8" 24/0 30 7/16" 24/16 40 15/32" 32/16 70 1/2" 32/16 70 19/32" 40/20 130 23/32" 48/24 175 1-1/8" 48
More informationKroger Manufacturing Shipping Container Labeling Requirements
Kroger Manufacturing Shipping Container Labeling Requirements Introduction: Kroger has invested considerable effort and monies to modernize and re-engineer its manufacturing and distribution systems. The
More information(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand
(Specifier Note: Aristech Surfaces LLC is the manufacturer of the Avonite brand The purpose of this guide specification is to assist the specifier in correctly specifying solid surface wall cladding, shower
More informationMirror Packaging Supplement
Mirror Packaging Supplement Contents Introduction:...2 Mirrors/Framed Art:... 2 Corrugate:...2 ECT:...3 Packaging:...4 Testing:...8 3B Procedure Overview...8 Resources:...10 1 Mirror Packaging Supplement.
More informationShrink Wrapping Options for Pharmaceutical Packaging
Shrink Wrapping Options for Pharmaceutical Packaging This latest technology in shrink wrapping enables a significant leap in performance for those pharmaceutical manufacturers desiring to streamline their
More informationDaimler Trucks North America
Daimler Trucks North America Packaging & Labeling Requirements For Aftermarket Parts PD484 (11/14) Table of Contents Preface Introduction 1.0 Compliance 2.0 Environmental Considerations 3.0 Packaging Responsibilities
More informationSection 6- Carton Packing, Packaging, Labeling & Shipping Requirements Packing and Packaging Guidelines Thousands of cartons are received weekly in
Section 6- Carton Packing, Packaging, Labeling & Shipping Requirements Packing and Packaging Guidelines Thousands of cartons are received weekly in our Service Center. In order to expedite the receiving
More informationOVERVIEW OF PROCEDURE 2B
Packaged-Products Over 150 lb (68 kg) 2B 2 008 ISTA 2 Series Partial Simulation Performance Test Procedure VERSION DATE Last TECHNICAL Change: JANUARY 2008 Last EDITORIAL Change: JANUARY 2008 For complete
More informationPACKAGING AND LABELLING OF HAZARDOUS WASTE
PACKAGING AND LABELLING OF HAZARDOUS WASTE This guide has been produced to provide you with an overview of the basic steps to be taken when preparing waste for movement off your site. TABLE OF CONTENTS
More informationPESMEL FULLY AUTOMATED STRIP PACKING LINES
PESMEL FULLY AUTOMATED STRIP PACKING LINES New Sensitive Way of Packing with High Capacity Pesmel Strip Packing Line, is designed to protect strips against damages, moisture and dirt. The new way of packing
More informationCarton Packaging, Packaging and Shipping requirements
Contents Carton Packaging,... 1 Footwear... 1 Shoe Laces... 1 Shoe Boxes... 2 Footwaer Master Carton Packaging... 3 Apparel and Accessories... 5 Apparel and Accessories Master Carton Packaging... 7 General
More informationA. STORAGE/ WAREHOUSE SPACE
A. STORAGE/ WAREHOUSE SPACE Question 1 A factory produces an item (0.5 x 0.5 x 0.5)-m at rate 200 units/hr. Two weeks production is to be containers size (1.8 x 1.2 x 1.2)-m. A minimum space of 100-mm
More informationMGM Brakes Label Specifications. The following label standards are to provide a uniform implementation and integration of material management:
6.2 Label Standards The following label standards are to provide a uniform implementation and integration of material management: 1. The minimum size of the standard MGM Brakes part identification label
More informationMonokote Fireproofing Type MK-6s Product Data and Application Instructions
Monokote Fireproofing Type MK-6s Product Data and Application Instructions Product Information/Description Monokote Type MK-6s Cementitious Fireproofing has been developed by Grace Construction Products
More informationTesting Packaged Products Weighing More Than 150 Lbs.
Testing Packaged Products Weighing More Than 150 Lbs. We recommend a series of pre-shipment tests to simulate the FedEx Express Freight shipping environment. Follow our instructions or let us do the testing
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationWater-Activated Tape Product Guide
Water-Activated Tape Product Guide The Industry Leader in High Performance Water-Activated Tapes Intertape Polymer Group (IPG) is the industry s High Performance Leader in Water-Activated Tapes. For more
More informationDomestic Packaging. Title: WI Owner: Operations Description: Packaging Users: Operations Rev: A. Personnel Date: 3/1/2018
Domestic Packaging All Domestic Skids are constructed using Pine or Compliant Plywood/ OSB **FLATBED Shipments: Packaging is Minimized -Standard Packaging does Not Apply -Gauge Material MUST be Skidded-
More informationFamous Footwear VCP
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoe boxes, hang tags and other packing materials from
More informationESR ICC Evaluation Service, Inc. Issued November 1, 2003 This report is subject to re-examination in one year.
ESR-1015 Issued November 1, 2003 This report is subject to re-examination in one year. ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California
More informationPRODUCT SPECIFICATIONS
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: High density cast resin architectural products, including columns, panels, caps, bases, trim elements and balustrade systems. Specifier Note: Article below
More informationTHE EFFECT OF ORIENTATION ON MECHANICHAL PROPERTIES OF RECYCLED PET
THE EFFECT OF ORIENTATION ON MECHANICHAL PROPERTIES OF RECYCLED PET Angela D. Hasenbalg, Western Washington University Abstract The use of plastic products is becoming more prevalent in society. Scrap
More informationHow to Create a Shipment
The shipment creation workflow helps you create shipping plans for your shipments to Amazon fulfillment centers. A shipping plan is a virtual collection of products that you want to send to Amazon fulfillment
More informationi tape with WATER-ACTIVATED TAPES
i tape with TM WATER-ACTIVATED TAPES Water-Activated Tapes For more than 90 years, IPG s water-activated tape product line has focused on innovative and technologically sound product developments. We have
More informationCash Drawer Identification
Cash Drawer Identification Please use this document to identify the model of cash drawer that is on hand. An FAQ section is listed at the end. 15in MMF Metal Cash Drawer Quick Specs: 15 1/8 inches deep
More informationCan Process Scrap Specification
Rev 3 February 2018 Can Process Scrap Specification Document Manager: Kerry Ward Approved by: Michael Anderson Note: This is considered an uncontrolled document unless it is being viewed on-line from the
More informationCOMPOSOLITE FIBERGLASS BUILDING PANEL SYSTEM
COMPOSOLITE FIBERGLASS BUILDING PANEL SYSTEM COMPOSOLITE Building Panel System Odor control covers at the Trinity River Waste Water Treatment Plant in Dallas, Texas, utilize COMPOSOLITE panels because
More informationabcdef ACG MTA 240 VERSATILE CURE FILM ADHESIVE Product Description Features Instructions for use
ACG MTA 2 VERSATILE CURE FILM ADHESIVE Product Description MTA2 is a structural film adhesive suitable for bonding both aluminium and composite substrates either to themselves or to honeycomb core materials.
More informationPRP-108 Performance Standards and Policies for Structural-Use Panels
A P A S T A N D A R D PRP-108 Performance Standards and Policies for Structural-Use Panels Published by APA The Engineered Wood Association February 1994 A P A The Engineered Wood Association 1997 APA
More informationPRODUCT PACKAGING STANDARDS GUIDELINES FOR CHEMICAL ANALYSIS
PRODUCT PACKAGING STANDARDS GUIDELINES FOR CHEMICAL ANALYSIS 0 PRODUCT PACKAGING STANDARDS Shipping Container Markings Shipping Container Codes Shipping Container Design Specifications Trailers and Inter-Modal
More informationMagnetic Dry Erase Chalk Image Projection Paintable Custom
Magnetic Chalk Image Projection Paintable Custom Magnetic & Product Reference Key Benefits: Feature a thin sheet of iron (ferrous, magnetic metal) in the HPL backer. Makes these more magnetic than powdered
More informationProfessional Grade Racking
UNIRAK STORAGE SYSTEMS Professional Grade Racking Stock Solutions Quick Ship Rack Intralogistics Optimized Rack North America has standardized the Tear Drop/ Riveted Beam End Plate design for good reason
More informationReducing stretch film waste in the food. and drink sector: Good practice for buyers and users
Reducing stretch film waste in the food and drink sector: Good practice for buyers and users Introduction The UK market for stretch film in pallet stabilisation is estimated at 140,000 tonnes annually.
More informationAutomotive and Mechanical Parts Packaging Guidelines and Designs
Automotive and Mechanical Parts Packaging Guidelines and Designs Responsible packaging can save you money and improve the safety and handling of your shipments. Follow these tips and design recommendations.
More informationCritical Cover Microbreathe Garments
2 Critical Cover Microbreathe Garments Critical Cover Microbreathe Garments Suitable for Use in Controlled Environments Features & Benefits: Choose Microbreathe garments for their outstanding protection,
More informationSECTION INSULATED METAL WALL PANELS. ATAS International, Inc. General Specification for Commercial/Industrial and Architectural Applications
SECTION 07 42 13 INSULATED METAL WALL PANELS ATAS International, Inc. General Specification for Commercial/Industrial and Architectural Applications PART 1 GENERAL 1.1. Summary The contract drawings indicate
More informationSupplier Packaging Guidelines ABB Inc. Robotics, North America 3.03.P01.W02, Rev. A
Supplier Packaging Guidelines ABB Inc. Robotics, North America 3.03.P01.W02, Rev. A Contents 1. Introduction... 3 2. General Requirements... 4 2.1. Environment... 4 2.2. Material Handling... 4 2.3. Air
More informationHP COMPRESSION TEST METHOD A Rev. A
1. SCOPE HP COMPRESSION TEST METHOD A-5951-1742-1 Rev. A This Standard describes the methods and specifications for compression testing of shipping containers, both empty and filled with product. 2. PURPOSE
More information