Famous Footwear VCP

Transcription

1 1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoe boxes, hang tags and other packing materials from suppliers authorized by WWW. All supplier contact information will be provided to the vendor by Wolverine Global Operations. 2. UPC/SKU/PRICE LABELS Apply WWW UPC labels as shown on document VCP 7.5.1, section Famous Footwear price labels are to be printed by the factory. The price label size should be 1 x 1, must be white with black Arial style lettering, and 3.8 cm wide x 2.5 cm high. The retail price to be used on the labels will be provided in the instructions on the WWW purchase order. Samples of the labels must be approved by WWW prior to production. Apply the price labels to the left or right of the WWW UPC label. Revised By: Krista Burdette Date: April 16, 2017 Page 1 of 5

2 3. SHIPPING CARTONS & PACKING 3.1 Carton requirements for footwear Top opening, regular slotted, double wall, C-flute corrugate construction. Minimum 175 pounds per square inch (PSI) bursting strength, 32 pounds per inch width edge crush test, paper weight Glued carton side seams are preferred. The use of staples in the side seams is not recommended. Cartons must be sealed with tamper evident packing tape in an H pattern on top and bottom. Do not band the cartons. PLEASE NOTE: for First Cost type orders (orders imported by Famous Footwear) ONLY, cartons must be sealed with tamper-proof, Famous Footwear logo packing tape. This special tape must be purchased from the following approved suppliers. Wan Shun Papers Industry Corp. No. 47 Li Hou Rd., Li shui Town, Nanhai, Foshan, GuangDong, China Tel: Fax: wangshung08@163.com Contact Person: Ms. Wang( ) DIMEL DISTRIBUIDORA DE MATERIAIS Rua Jose do Patrocinio, 372 Estania Velha RA Brazil Phone: Fax: Contact Name: Bianca Rohten bianca@dimelnet.com.br Cost per Roll: US$ 6.35 Size of each roll: 220 Meters (70mm wide) Cartons must meet the following weight and dimensional requirements: Minimum Maximum Length: 13 (33.02 cm) 38 (96.52 cm) Width: 8 (20.32 cm) 20 (50.8 cm) Height: 7 (17.78 cm) 17 (43.18 cm) Gross Weight: 10lbs (4.5 Kgs) 50lbs (22.7 Kgs) Revised By: Krista Burdette Date: April 16, 2017 Page 2 of 5

3 3.2 Packing footwear Pack cartons according to the WWW packing list (available from partners.wwwinc.com) and apply the corresponding WWW carton labels. Place shoe boxes in carton so that the UPC labels are facing upwards and all in the same direction. Do not double stack shoe boxes Fill empty space in partial cartons with plain white shoe boxes clearly marked EMPTY. 4. SHIPPING CARTON MARKING 4.1 Carton labels For standard footwear cartons apply the WWW barcode carton label (license plate) to the front (width) of the carton and the smaller dimension of the label must wrap around the corner onto the side (length) of the carton. The case label must be 50 mm from the bottom of the case. Revised By: Krista Burdette Date: April 16, 2017 Page 3 of 5

4 WWW license plates are not required for First Cost type orders. For First Cost type orders (orders imported by Famous Footwear) ONLY, the factory is responsible for ordering and paying for Famous Footwear case labels (see FORMS Famous Footwear Callout Order Form). Apply the 4 x 6 label vertically to the lower right corner of longest side. This label must be applied so that the right edge of the label is 2 (5 cm) from the right edge of the carton and the bottom of the label is 2 (2.5 cm) from the bottom edge of the carton. Example: Revised By: Krista Burdette Date: April 16, 2017 Page 4 of 5

5 4.2 Carton markings Markings must be stenciled in lettering at least 1/2 (1.5 cm) high. Main mark on longest side: Vendor Stock Number Style Name/UPC Description Famous Footwear PO number Famous Footwear Item Code If prepack, size breakdown/or size grid Assortment contents information (when applicable) US Size Width (OR) Size Run & quantities (when applicable) Color (name) Quantity (total number of pairs) Carton sequence number (Carton X of Y) Net & gross weights Carton measurements Side mark on shortest side: <Famous Footwear> (in diamond or triangle) Final destination (ship-to) address Customer PO number WWW Internal Reference number WWW stock number Carton sequence number (Carton X of Y) Country of origin 5. PACKING LIST & COMMERCIAL INVOICE For each purchase order, a complete packing list itemized by carton is to be attached to the lead carton (carton #1). The envelope containing the packing list must be clearly marked as Packing List Enclosed. Packing lists must include the following information: Vendor Name: Ship to address PO number WWW Internal Reference number Carton numbers WWW stock number(s) Famous Footwear Item Code Color(s) Sizes & widths Revised By: Krista Burdette Date: April 16, 2017 Page 5 of 5

6 Pre-pack ID number (when applicable) Quantity per carton Total quantity per SKU Weights & measurements See FORMS VCP for an example of an acceptable packing list format. PLEASE NOTE: First cost type orders (orders imported by Famous Footwear) ONLY, the registered trademark brand name (example: Hush Puppies, Merrell, etc.) should be stated on the factory/beneficiary s commercial invoice. 6. CHARGE BACKS Failures to comply with these guidelines will result in charge backs per the customer s charge back schedule. 7. CONTACTS If you have any questions regarding the procedures in this manual, please send a message to richvendorcompliance@wwwinc.com and we will be happy to assist you. Please include your factory name, the WWW brand name, purchase order number, and stock number if applicable. You may also contact your nearest WWW Global Operations office for assistance. Revised By: Krista Burdette Date: April 16, 2017 Page 6 of 5