50070/JATO/GS/AAD-8 25 Mar 2011 REQUEST FOR INFORMATION FOR JATO BOOSTER

Transcription

1 Tele : (ASCON) (DID & Fax) Directorate General of Army Air Defence General Staff Branch Integrated HQ of MoD (Army) Sena Bhawan DHQ PO New Delhi /JATO/GS/AAD-8 25 Mar 2011 (Vendor concerned) REQUEST FOR INFORMATION FOR JATO BOOSTER 1. The Indian Army is planning to procure Jet Assisted Take Off (JATO) Booster for KD2RD5 aerial targets. With a view to identify probable vendors who can undertake the said project the OEMs / Vendors are requested to forward information on the product which they can offer. The parameters / broad specifications of the items are mentioned in the questionnaire attached as Appendix A. In addition the vendors are required to furnish details as per Appendix B. 2. Apart from the information as per the Appendices the vendors may also forward technical details / product brochures / literature etc pertaining to the item in question. 3. The required information / details may please be forwarded at the following address by 20 Jun (a) DIRECTORATE GENERAL OF WEAPONS AND EQUIPMENTS (WE-9) GENERAL STAFF BRANCH ROOM NO 208G, SOUTH BLOCK INTEGRATED HQ MoD (ARMY) DHQ PO NEW DELHI Fax No : we_dte@yahoo.com

2 2 (b) DIRECTORATE GENERAL OF ARMY AIR DEFENCE GENERAL STAFF BRANCH INTEGRATED HQ MoD (ARMY) SENA BHAWAN DHQ PO NEW DELHI Fax No : dirprocaad@gmail.com (c) DIRECTORATE GENERAL OF PERSPECTIVE PLANNING GSQR CELL ROOM NO 902, A WING SENA BHAWAN, INTEGRATED HQ MoD (ARMY) DHQ PO NEW DELHI Fax No : An early response is requested. Sd/- x x x x x (GNM Rao) Col Dir (Proc) Army AD Encls : As above

3 3 Appendix A QUESTIONNAIRE Ser Specifications / Query Reply Q1. Will you be able to provide Jet Assisted Take Off (JATO) Booster to launch Pilotless Target Aircraft (PTA) KD2R5 (PTA-KD2R5)? Q2. What are the physical features of the JATO Booster in terms of the following: - (a) Overall length (b) Chamber Diameter (c) Weight before firing (d) Weight after firing (e) Storage temperature Q3. What are the functional characteristics of the JATO Booster in terms of the following: - (a) Firing Temperature limits (b) Recommended minimum firing circuit voltage (c) Maximum safe no fire current (d) Igniter circuit resistance (e) Maximum ignition interval (f) Safe Operating Range (g) Nominal Thrust (h) Nominal Propellant Burning time at +70 F (j) Nominal total impulse at -70 F Q4. Which igniter assembly will be used with Rocket Motor Mk 91? Q5. Will the igniter facilitate connection through the propellant Section to plugs? Q6. What are the dimensions of the Thrust Chamber? Q7. What is the operating temperature range of the rocket motor and igniter assembly? Q8. What will be the tentative cost of the system? Q9. Will you be able to provide the JATO Booster for NCNC trial in India? If so, in what time period after the request is made? Q10. What will be tentative time frame for supply after signing of contract? Q11. Any other relevant information?

4 4 Appendix B INFORMATION PERFORMA 1. Name of the Vendor / Company / Firm. (Company profile, in brief, to be attached) 2. Type (Tick the relevant category). (a) Original Equipment Manufacturer (OEM) Yes / No (b) Government sponsored Export Agency Yes / No (Details of Registration to provided) (c) Authorised Representatives of OEM Yes / No (attach details) (d) Other (give specific details) (e) Any collaborator / partner in India (in case of foreign vendors). 3. Contact Details. Postal Address City Country Tele : Province : Pin / Zip Code : Fax URL/Web Site :

5 5 4. Local Branch/Liaison Office / Authorised Representatives, in Delhi (if any). Name & Adress : City : Province : Pin Code Tele : Fax 5. Financial Details. (a) Annual turn over : USD (b) Earlier contracts with India Ministry of Defence / Government agencies :- Agency Contract Number Equipment Quantity Cost (c) Details of manufacturing infrastructure available : 6. Certification by Quality Assurance Organisation (If Applicable). Name of Agency Certificate Applicable from (Date & Year) Valid till (Date & Year) 7. Equipment / Product Profile (to be submitted for each product separately). (a) Name of product : (Should be given category wise for e.g. all products under night vision devices to be mentioned together)

6 6 (b) (c) (d) Description (attach technical literature) : Whether OEM or Integrator : Status (in Service / Design development state) : (e) (f) Production capacity per annum: Countries where equipment is in service: (g) Whether export clearance is required from respective government (Foreign vendors only): (h) In case of equipment and ammunition JB MOU compliance to be specified. (j) Details of any collaboration / joint venture / co production / authorized dealer with Indian Industry (Foreign Vendors only): Name & Address : Tele : Fax : 8. (a) Are you making the full eqpt or it is being integrated by you? Give details (b) What are the components, sub-system or sub-assemblies of the eqpt which are not manufactured by you? Pl give details. 9. Any other Relevant Information.