Data sheet E-DAT C6 24x8(8) 1RU modular LSA Cat.6 patch panel
|
|
- Shona Golden
- 6 years ago
- Views:
Transcription
1 Illustrations Dimensional drawing Wiring Page 1/6 See enlarged drawings at the end of document Product specification 19 inch 1RU frame made of silver anodized aluminum with 24 individually shielded RJ45 jacks certified to GHMT Cat.6 12C-de-embedded compliance with class E to ISO/IEC Ed.2.2: , DIN EN : tested: Link up to 500 MHz for 10 GBit Ethernet (IEEE 802.3an) suitable for Power over Ethernet (PoE, PoE plus and UPoE) 4 module housings, made of zinc die-casting, with six RJ45 jacks each wire pairs can be led to the LSA terminal without untwisting the pair connection of 2 to 4-pair data lines to LSA insulation displacement connectors (AWG 22-24) conductor colors marking to TIA/EIA 568A label window for enclosed identification labels optional strain relief using cable ties modules connected by means of grounding rail, incl. 30 cm grounding cable
2 Technical Data Page 2/6 General Data Fields of application Design Mounting style Shielding Transmission technology Wiring Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Inches Height unit Labeling option Office patch panel 1RU shielded Copper T568A anodized alu x x mm 4.07 x x 1.72 in. 19 inches 1RU label window with identification label Transmission characteristics Category (ISO) 6 Class (ISO/IEC) Category (TIA) 6 PoE PoE plus UPoE Transmission rate up to 10 GBit E A IEEE 802.3af IEEE 802.3at yes IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 24 Number of ports interface 2 equipped 24 LSA terminal block RJ45-jack Number of positions/contacts interface 1 24 x 8 Number of positions/contacts interface 2 Cable access/outlet 180 Grounding wire length Grounding wire length Shield connection 24 x 8P/8C 0.30 m 0.98 ft flexible contact spring
3 Technical Data Page 3/6 Electrical characteristics Current carrying capacity Rated voltage Contact resistance Through resistance Insulation resistance Dielectric strength conductor-conductor (secondary) max. 1 A max. 50 V max. 20 mohm max. 200 mohm min. 500 MOhm max V DC Mechanical characteristics Insertion and withdrawal force max. 20 N Life - Number of mating cycles min. 750 Position/mounting of latch - standard installation position top Materials and material properties Material - Terminal block housing Material - Jack contact Material - Jack contact finish Material - Terminal block contact Material - Terminal block contact finish Material - Subrack Material - Module support Material - Module support finish PBT (polybutylene terephthalate) CuSn (Kupfer-Zinn) Ni + Au (nickel-gold) CuZn (brass) Sn (tin) GD-Zn (zinc die-cast) Al (Aluminium) silver anodized Environmental conditions Temperature (min. - max.) Temperature - Storage C C Temperature - Storage F F Temperature - Operating C C Temperature - Operating F F Electromagnetic measurement E 2
4 Technical Data Page 4/6 Certifications GHMT PVP Gost Certification yes yes Approvals CE RoHS compliant compliant The product meets the following standards Generic cabling systems General requirements ISO/IEC Ed.2.2: DIN EN : TIA/EIA 568-C.2 ( ) Connectors for electronic equipment Free and fixed connectors DIN EN : Classifications ETIM 5.0 EC Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 1 pc(s) / box g 4.25 lb x x mm x 6.50 x 2.56 in.
5 Accessories Page 5/6 Designation Label sheet for E-DAT C6 and E-DAT design patch panels
6 Powered by TCPDF ( Data sheet Illustrations Dimensional drawing Page 6/6
ORDERING INFORMATION: P/N K S 5 E U x CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) P111
CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) Insulation Resistance: 500M ohms (min.) Contact Resistance: 20m ohms (max.) Current Rating: 1.5 Amps. DC Resistance: 0.1 ohm (max.) Withstanding Voltage:
More informationPrevious Page Return to Index Next Page
Previous Page Return to Index Next Page http://www.switchcraft.com/products/jack-107.html (1 of 8) [2/13/2005 2:31:54 PM] 3.5 mm SINGLE MONO AND STEREO JACKS 1. 35RAPC4BV4 2. 35RAPC2AV 3. 35RAPC2BHN2 4.
More information3M Eurosocket Type C (Rows A & C or A, B & C Filled)
DIN 41612 compatible High density (64 & 96 position) Mates with DIN 41612 Type C headers High reliability contact design Can be daisy-chained or end terminated to flat cable Optional strain relief with
More informationheavy mate D Rated voltage 250 V Rated current 10 A A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128
heavy mate D Rated voltage 250 V Rated current 10 A... 16 A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128 22 heavy mate D Brief information Approvals, Testhouse Characteristics Approval-Number
More informationBulletin 800F Plastic and Metal Operators 22.5 mm mounting hole IP65/66, Type 4/4X/13 Internationally rated operators
Bulletin F. mm Push Buttons Product Overview Bulletin F Plastic and Metal Operators. mm mounting hole IP/, Type /X/ Internationally rated operators Table of Contents See below. TABLE OF CONTENTS Page Specifications...
More information3M D Sub Socket 50 Position 8350 Series
M D Sub Socket 50 Position 850 Series IDC compatible Lower insertion/withdrawal force than other 50 position products Available in either open or closed end cover Mounting options include #4-40 UNC or
More informationOutdoor Carrier Class Shielded Ethernet Cable. Models: PRO, CARRIER, Connectors. Increase Performance. Extreme Weatherproof. ESD Damage Protection
1Datasheet Outdoor Carrier Class Shielded Ethernet Cable Models: PRO, CARRIER, Connectors Increase Performance Extreme Weatherproof ESD Damage Protection Extended Cable Support Datasheet Protect your networks
More informationRJ Vista. EMI Quiet. Right Angle. Top Entry
www.rjvista.com Contents Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
More informationCompact Module. Enhanced Category 5 FTP Cabling System
Compact Module Enhanced Category 5 performance Suitable for Gigabit Ethernet Ultra-slimline design Euro style module Interchangeable with other Euro modules and blanks Individually QA tested Easy to use
More informationData Bus Connector and Terminator Requirements Document DB-1001-A. Revision C
Data Bus Connector and Terminator Requirements Document DB-1001-A Revision C 2507 W. Geneva Dr. Tempe, Arizona 85282 Phone [602] 231-8616 FAX [602] 273-9135 www.phxlogistics.com TABLE OF CONTENTS 1. Introduction
More informationSolutions for Electronic Specialty Markets (ESM)
M Worldwide : United States : Electronics Manufacturing Solutions for Electronic Specialty Markets (ESM) Product Catalog for Electronic Specialty Markets M Electronic Specialty Markets - New Product Releases
More informationPLCC Sockets Through Hole - M43 Series
Through Hole - M43 Series PART NUMBER LEGEND M43X-XX-XX NUMBER OF CONTACTS 20, 28, 32, 44, 52, 68, 84, 100 (-10 Style) 44, 52, 68, 84 (-11 Style) STYLE -10 Standard wall thickness, through hole -11 Thin
More informationHigh Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
More informationSECTION HORIZONTAL CABLING
PART 1 - GENERAL 1.1 SUMMARY SCOPE OF WORK SECTION 25160 HORIZONTAL CABLING 1. Horizontal cabling is the portion of the cabling system that extends from the work area to the Telecommunications Room or
More informationPHOTOVOLTAIC SOLAR ENERGY POLYCRYSTALLINE MODULES - SI-ESF-M-P156-60
Solar Innova uses the latest materials to manufacture photovoltaic modules. Our modules are ideal for any application that uses the photoelectric effect as a clean energy source because of its minimal
More information1. Telecommunications mounting elements. 2. Backboards. 3. Telecommunications equipment racks and cabinets. 4. Grounding.
ALLIANT ENERGY CENTER PAVILIONS Project No. 2013 027 SECTION 27 11 00 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More information3M PCB Connector.100 Four Row 3400 Series
PCB Connector.00 Four Row 300 Series Low profile Standard staggered grid Variety of pin lengths and plating options available See Regulatory Information Appendix (RIA) for chemical compliance information
More informationProShell Support Profile for AS/RS and Transfer Cars. An Option for Conductix-Wampfler Conductor Rail Systems
for AS/RS and Transfer Cars An Option for Conductix-Wampfler Conductor Rail Systems Table of Contents System Description 4 System Advantages 5 Technical Data 6 Modular Concept 6 Basic Modules 7 ProShell
More information36,50 21,50. RJ45, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 10 GIGABIT, CONTACT SALES OFFICE FOR TEST RESULTS
29,36 TYPICAL 26,98 TYPICAL 2,50 M28x - 6g TO SUIT H INTERFACE 4,93,250-0,P-0,3L-TS 3,25, CAT6a FEEDTHROUGH CONNECTOR GROUNDED TO OUTER SHELL DATA TRANSFER RATE TESTED TO 0 GIGABIT, CONTACT OFFICE FOR
More informationInside Wire. Wire & Cable. Category 6 Plus Plenum. Category 6 Plus Riser. PREMIER Category 6 CMP/CMR
Category 6 Plus Plenum Category 6 Plus Plenum has a cross web design for maximum pair separation. It features sequential footage markings that count down to zero feet -- removing the guess work concerning
More informationCannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
More informationSMP Coaxial Connectors Update
SMP Coaxial Connectors 2005 Update SV Microwave has introduced a complete line of SMP connectors which conform to DSCC 94007, 94008 and MIL-STD-348 specifications. SMP connectors provide microwave performance
More informationSTANDARD COAXIAL CONNECTORS
STANDARD COAXIAL CONNECTORS COAXI-KIT ISO 9001 APPROVED RADIALL COMPANY PROFILE Since 1952, RADIALL has specialized in the field of coaxial connectors and cables assemblies. RADIALL s experience and high
More informationPHOTOVOLTAIC SOLAR ENERGY POLYCRYSTALLINE MODULES - SI-ESF-M-BIPV-SM-P125-36
Solar Innova uses the latest materials to manufacture photovoltaic modules. Our modules are ideal for any application that uses the photoelectric effect as a clean energy source because of its minimal
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More information2/2 % ) Direct Acting Subminiature Solenoid Valves. 1/8" and 1/4" NPT. Features. Construction. Electrical
ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT / 856 -WAY Features -way normally closed operation Compact design Brass and 6 stainless steel
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
More information3M Ground Plane Cable.050" 28 AWG Stranded, One Drain, PVC 3476 Series
M Ground Plane Cable.050" 28 AWG Stranded, One Drain, PVC 476 Series 28 AWG wire on.050 inch centers permits mass termination to a broad line of IDC connectors Ground plane construction for increased signal
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
More informationReference thermometer Model CTP5000
Calibration technology Reference thermometer Model CTP5000 WIKA data sheet CT 61.20 Applications Reference thermometer for measuring very accurate temperature in a range of -196... +660 C [-321... +1,220
More informationSECTION GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 28 05 26 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY SPEC WRITER NOTE: Delete // // if not applicable to project. Also delete any other item or paragraph
More informationC27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
More information3M Mini D Ribbon (MDR) Connectors.050 Boardmount Through-Hole Right Angle Plug - Shielded 101 Series
Boardmount Through-Hole Right ngle Plug - Shielded 101 Series Wiper-on-wiper contact for reliable repetitive plugging Rugged die cast metal case construction Screw or ground lock PCB retention Normal and
More informationSPECIFICATIONS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
NEW! Series TK SPECIFICATIONS: CONTACT RATING: 200mA / 1.5A @ 5~30VDC. ELECTRICAL LIFE: 1 million cycles at full load. CONTACT RESISTANCE: 20m-ohms max. INSULATION RESISTANCE: 600VDC 10M-ohms min. ESD
More informationROLINX Laminated Busbar. Design Rules Version 01 (12/2015)
ROLINX Laminated Busbar Design Rules Version 01 (12/2015) Content 1. Introduction... 03 7. Features... 13 2. Configuration...03 8. Thermal parameters... 14 3. Products... 04 9. General parameters... 14
More informationACT. Summary. 1 Introduction. 2 Synoptic. 3 Technical characteristics. 4 Part-numbering system. 5 Arrangements. 6 Receptacles. 7 Plug / Panel seal
Summary 1 Introduction 2 Synoptic 3 Technical characteristics 4 Part-numbering system 5 Arrangements 6 Receptacles 7 Plug / Panel seal 8 Mating and unmating dimensions 9 Mounting cutouts 10-11 Contacts
More informationSeries 805 Mighty Mouse Triple-Start ACME Thread Receptacle
Mighty Mouse and Ordering Information Three Mounting Options: Jam nut with O-ring for rear panel mounting, square flange for front or rear panel mounting, or in-line receptacles for free-hanging cables.
More informationExtended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
More informationEffect Of Oxidation In Tin Coated Copper Bus Connections
Effect Of Oxidation In Tin Coated Copper Bus Connections Belden has brought out a line of cables that are all tinned copper. Tinned copper The Statue of Liberty is a famous example of copper oxidation.
More informationC27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
More informationSEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets
SEISMIC PROTECTION SYSTEMS Bracing Products for Racks & Cabinets Seismic Frame Two-Post Rack Page 11-3 Seismic Protection Products - Racks Page 11-6 Seismic Protection Products - Runway Page 11-8 Seismic
More informationProgrammable Device Server User Manual
Programmable Device Server User Manual Version 0.2, Mar 2016 Service and usage information for ids-718i-d ids-718im-d CR ids-728i-t CR ids-728im-t CR ids-448im-d Intelligent Device Server with 1 RS-232/422/485
More information2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
More informationContact plating material options for electronic connectors A comparison of hard gold and hard gold flashed palladium-nickel (80/20)
1 Contact plating material options for electronic connectors A comparison of hard gold and hard gold flashed palladium-nickel (80/20) Dr. Inga Heile Strategic Technology Expert HARTING AG & Co. KG Rainer
More informationAmphenol RF- SMA Connector Series
Page 1 of 8 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC
More information3M Round, Shielded/Jacketed, Flat Cable.050" 28 AWG Stranded, Mass Terminatable, PVC/PVC 3659 Series
M Round, Shielded/Jacketed, Flat Cable.050" 28 AWG Stranded, Mass Terminatable, PVC/PVC 659 Series Round construction permits easier routing 28 AWG wire on.050 inch pitch permits mass termination to broad
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
More informationDISCONTINUED. 3M PC Card Header Dual Slot, Low Profile, Integrated Ejector. Physical. Electrical. Environmental. UL File No.
PC Card Header Meets PCMCIA specifications Tapered header pins provide easy insertion High temperature plastic insulator Left or right ejector options ESD clips and plastic pegs for secure hold-down See
More informationPower Supply Featuring OMRON s Unique, New Undervoltage Alarm Function with Compact Body Contributing to Machine Downsizing
Switch Mode Power Supply S8VM (15/30/50/100/150/300/600/1,500-W Models) Power Supply Featuring OMRON s Unique, New Function with Compact Body Contributing to Machine Downsizing New undervoltage alarm function
More informationThermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
More informationLong-Range Reader/Writer
Features Read and Write to Dozens of Tags Simultaneously (Multiple-Tag-In-Field) Industrial Strength Reader/Writer (IP66) Large Read/Write Area International Recognized Frequency of 13.56 MHz RS422 Bus
More information15 Pin DSUB - MALE 15 Pin DSUB - FEMALE 9 Pin DSUB - MALE 9 Pin DSUB - FEMALE
Last Revised: 6 Oct 07 Description: This data sheet show our range of high quality appliance cables, such as signal cables (VGA / DVI / DisplayPort (DP)), Touchscreen and power cables. These are either
More informationSECTION INSULATED WIRE AND CABLE
SECTION 16120 INSULATED WIRE AND CABLE PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the contract item Insulated Wire and Cable, which includes the following items with accessories, and appurtenances:
More informationSECTION CHAIN-LINK FENCES AND GATES 02821/1
SECTION 02821 - CHAIN-LINK FENCES AND GATES 02821/1 PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Chain-Link Fences: 2. Gates: horizontal slide or swing. 3. Fences installed where
More informationA. Product Data shall be provided for each type of product indicated.
32 31 13 CHAIN LINK FENCES AND GATES SECTION 1 GENERAL 1.1 SUMMARY This Section includes the following: 1. Chain Link Fences 2. Gates for Chain Link Fences. See electrical specifications for electrical
More information2.54mm Pitch Board to Cable Connector
2.54mm Pitch Board to Cable Connector FRC5 Series Conforming Standard MIL-DTL-8353 FETURE UL pproved (File No. E72124) Conform to MIL-DTL-8353 Polarizing key prevents from mis-mating. SPECIFICTIONS Rated
More informationharness manufacturing
EN harness manufacturing OMEGA 740 750 Komax has developed the fully automatic block loader machines, the Omega 740 and Omega 750, for wire harness production with insertion of housings. The highly flexible
More informationUSB Connectors. USB Connectors. Interconnect Solutions Worldwide. D38999 Derived USB-A & USB-B Connector Assemblies for Harsh Environments
USB Connectors USB Connectors D38999 Derived USB-A & USB-B Connector Assemblies for Harsh Environments NCAGE Code U5792 www.polamco.com USB Connectors D38999 Derived USB-A & USB-B Connector Assemblies
More informationTHERMOCOUPLES and THERMORESISTANCES - Temperature measurement sensors for industrial use Figure 1: Standard Thermocouples
THERMOCOUPLES and THERMORESISTANCES - Temperature measurement sensors for industrial use Figure 1: Standard Thermocouples Figure 2: Mineral Oxide Thermocouples Figure 3: Thermoresistances GENERAL CHARACTERISTICS
More informationALUBOX Series Junction boxes in IP66 aluminium alloy
UBOX Series Junction boxes in IP aluminium alloy > ENCLOSURES IP UBOX Series UBOX-EX Series Dimensions () Screw for attaching cover Earthing screws Weight (Kg) 00 x 00 x 59 n 2 M5x0 n M4x 0,290 /32 53.00
More informationC26800 CuZn33 Industrial Rolled
C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE
More informationHOT-DIP TINNED COPPER AND COPPER ALLOY STRIP
HOT-DIP TINNED COPPER AND COPPER ALLOY STRIP HOT-DIP TINNED STRIP WHY HOT DIP TINNING? Characteristic for hot-dip tinned coatings is the formation of an intermetallic phase (IMP) between the base material
More informationSECTION HEAT TRACING FOR PLUMBING PIPING
SECTION 22 05 33 HEAT TRACING FOR PLUMBING PIPING PART 1 - GENERAL 1.1 DESCRIPTION SPEC WRITER NOTES: 1. Delete between //----// if not applicable to project. Also delete any other item or paragraph not
More informationStainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
More informationmin. 50min. 65min. PIT / P3 / P4 Ø
Flush design Stop switch, IP 65 Equipment consisting of (schematic overview) 2 78 23 Actuator Anti-twist ring 2... 6 Pressure ring = Screw terminal Product can differ from the configuration. Bayonet flange
More informationPRESENTS A RFID THE JANUS* GATE: RFID TERMINAL SYSTEM FOR CONTAINERS CCCCCONTAINERS CONTAINERS RFID NEPTUNESEAL * CONTAINER BOLT SEAL
RFID PRESENTS A THE JANUS* GATE: RFID TERMINAL SYSTEM FOR CONTAINERS *Mythological god with two heads who looks to the past and future and symbolizes gateways and transitions CCCCCONTAINERS CONTAINERS
More informationSPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE
SPRING LOADED THERMOCOUPLE CONFIGURATIONS THERMOWELL & REPLACEABLE INSERT II 2G/D Ex e TCRE/WE C20 C21 C26-2 C26-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration
More informationWire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers
Wire and Cable Heat-shrink Tubing Non-shrink Tubing Braided Sleeving Screening Braids Moulded Parts Terminals and Splices Wire and Cable Markers Accessories Connectors Backshells Bonding Leads Metal Braids
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationTechnical System Catalogue Modular PDU (PSM)
Technical System Catalogue Modular PDU (PSM) Benefits of PSM busbars at a glance Modular configuration, flexibly extendible Redundant designs in busbars are supported Vertical mounting in the rack without
More informationRuby Installation Manual
Ruby Installation Manual Version 02 www.servodynamics.com Introduction Table of Contents: 1 2 2.1 2.2 2.3 INTRODUCTION -------------------------------------------------------------------------------------
More informationINDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products
More informationRoHS Compliance Document
D2-Pak RoHS Compliance Document Contents: 1. 2. Solder Reflow 3. Tin Whisker Report D2-pak (3 or 5 Lead) BOM 1 90598-46-2 0.05808 11% 3.8% Lead Frame Copper 0.94840 Die Attach Soft Solder 0.01200 Cu 7440-50-8
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
More informationTEMPORARY PROTECTIVE GROUNDING EQUIPMENT
TEMPORARY PROTECTIVE GROUNDING EQUIPMENT TEMPORARY PROTECTIVE GROUNDING EQUIPMENT NOTE: When ordeing assemblies of grounding products, please make sure all items included in the assembly are only from
More informationHSM58 Universal Material Tester 20kN
HSM58 Universal Material Tester 20kN Sturdy Ground Steel Pillars make unit robust for student or demonstration use Hand-operated hydraulic system enables manual control of loading for maximum precision
More informationD*MA Connectors
3401-002 D*MA Connectors Features/Benefits D*Sub Connector type Removable Contacts technology Standard and High Density available From 9 to 104 ways ESCC Specification. Reference 3401002 Typical Applications
More informationSECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System
SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Welded System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF WELDED SYSTEM PART 1 GENERAL 1.1 SECTION
More informationQuick Facts LED AREA FIXTURES. Modern bollard produces 360 spread without glare. Aluminum construction. RGBW capable with ZDClink systems.
TYPE CATALOG # PROJECT NOTES LED AREA FIXTURES 2.5" 6.4 cm apillar Modern bollard produces 36 spread without glare. Aluminum construction. RGBW capable with ZDClink systems. Quick Facts n Die-cast aluminum
More informationIEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor
TABLE OF CONTENTS SECTION SUBJECT PAGE I. SCOPE...1 II. APPLICABLE DOCUMENTS...1 III. CONDUCTOR...2 IV. SEPARATOR...2 V. INSULATION...2 A. Physical Properties...2 B. Electrical Properties...3 C. Qualification
More informationA LIGHTWEIGHT SOLUTION FOR SHIELDING AND CONDUCTING
A LIGHTWEIGHT SOLUTION FOR SHIELDING AND CONDUCTING EMI Shielding ARACON fibers braided into a shield or sock offer superior performance against electromagnetic interference. Advantages include: More uniform
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More informationMNL, SEL DIMENSIONS, SITE AW PLANNING GUIDE ARTWORK SIZE A SHEET 1 OF 1
Artwork and Signature File for: MAN-01120, MNL, SEL DIMENSIONS, SITE PLANNING GUIDE Artwork consists of: Thirty-Six (36) 8 ½ inch x 11 inch sheet(s) attached. REV AUTHORED BY DATE A.TAMBASCIO 01/20/10
More informationAVX Specialty Catalog
AVX Specialty Catalog MOBO Connectors www.avx.com Version 16.4 Table of Contents BATTERY ORS........................................................... 2-35 Standard 2.5mm Pitch 9155-000.............................................
More informationSubstrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source DF57 Series Swing-Lock Structure explanatory drawing Before mating Lock portion Features 1.Reinforced lock structure with swing
More informationSPECTRO XRF Report. SPECTRO xsortxhh03. Analysis of Solid Metal Samples. Summary
XRF Report Nr. XRF-70, Rev. 2 SPECTRO XHH03 Summary Excitation of the fluorescence radiation in the sample by an X-ray tube has been optimized so that extremely short measuring times with a high sample
More informationELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200
ELECTRONIC EARTHING EQUIPMENT SERIES GRD 4200 The GRD 4200 is an electronic earthing equipment for tankers during loading and unloading operations of flammable liquids in places with danger of explosion.
More informationPlating Selection Guide. Optimizing Performance in the Harshest Environments
Plating Selection Guide Optimizing Performance in the Harshest Environments Safe, sustainable & durable plating solutions that enhance connector performance and reliability, even in the harshest environments
More informationHELUKABEL CC-Link Certified Cables
Data, Network & Bustechnology HELUKABEL CCLink Certified Cables The HELUKABEL GmbH provides you with all cable types for your CC Link network, approved by the CLPA organization. In addition to the classical
More informationMaterial Specification
Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength
More informationPRODUCT RANGE CABLE GLANDS
PRODUCT RANGE CABLE GLANDS INDUSTRIAL CABLE GLANDS The ideal solution for each application HUMMEL offers a huge range of Cable Glands for industrial applications. High-quality materials and innovative
More informationType FLX Freezer Floor Frost Heave Protection DESIGN GUIDE
Type FLX Freezer Floor Frost Heave Protection DESIGN GUIDE Commercial Products Type FLX TM Freezer Floor Frost Heave Protection DESIGN GUIDE Contents Introduction...2 Application Information... 2-3 Product
More informationh Reclamation Center Lot Number List
h Reclamation Center Lot Number List Lot #Description Base Metal Primary PM 0 Mixed Material and Computers Mixed 1 IC device w/encapsulation, plastic - Malaysia Copper Gold 2 IC device w/encapsulation,
More informationMar11 Rev D
Product Specification 108-1542 11Mar11 Rev D Mini-Universal MATE-N-LOK* Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for MATE-N-LOK* mini-universal
More informationThermal-Tab and Thermal-Ribbon Sensors
Thermal-Tab and Thermal-Ribbon Sensors Install these compact sensors anywhere for accurate point sensing and fast response. All Thermal-Tab modules use a thin-film RTD element. All Thermal-Ribbon models
More informationMulti-contact Compact Circular Connectors
Multi-contact Compact Circular Connectors RM Series Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated current Rated voltage [RM5] 0 ( and 4 contacts)
More informationFeb12 Rev D
Product Specification AMPSEAL* Connectors 108-1329 01Feb12 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMPSEAL* connectors. 1.2. Qualification
More informationPower Electronics, Inc. Packaged Equipment Center Standard Construction and Design Features
DESIGN CRITERIA FOR STANDARD CONSTRUCTION: These standard design elements of the P.E.I. Power Equipment Center are utilized to meet the following design criteria per ASCE 7-05 as adopted by the IBC (International
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Updated format, division title, and removed references to other sections. - mgl44 A. Summary This section contains design criteria for the
More information