protection Work protection Insulation technique Machine protection Work protection

Transcription

1 protection Work protection Insulation technique Machine protection Work protection Work protection Made in Germany JUTEC GmbH Mellumstra ße D O ldenburg Tel FAX E- M ail: info@jutec.com w w w.jutec.compage 1

2 Work protection why the CE Mark? Starting on the 1st of Juli 1995, only heat protection gloves that have passed and have been awarded the machine safety law CE can be placed for sales on the market. (89/686/EWG) The advantages for work protection: all gloves delivered are accompanied by a users manual with information for the users range. all JUTEC products fulfill the test criterion for: thermical risks (EN 407), mechanical risks (EN 388), molten metal () and general demands (EN 420). JUTEC is certified according to ISO 9001: 2008 from the DGUV Test. all JUTEC produces are tested exclusively from an accredited certification office. The following data serve for orientation. Because we do not have all the exact applications of the products, we advise that you clear the operational use of goods before using them. We do not take the responsibility or give guarantee for any items that our customers use inproperly. Before application the products must be inspected for any mistakes. We will not take any liability for possible misprints. Contact heat up to 200 C Cotton terry cloth glove CE CAT I, EN 407 soft, washable double insulation use: to handle hot objects such as baking trays, for barbecues, bakeries etc. EN 407 HBS cm mitten Welders glove made of heat resistant Sebatan leather CE CAT II, EN 407, EN 388 insulated 5-finger welder glove sewn with KEVLAR -Garn KAT. II H05L0035-SC 35 cm 5-finger KEVLAR Knit glove CE CAT II, EN 407, EN finger glove with or without lining sizes 8,9,10 cut resistant, washable use: glass, metal, automobile and food industries etc. KAT. II H cm 5-finger without lining H cm 5-finger with lining H cm 5-finger with lining *KEVLAR only by DuPont PAGE 2

3 Work protection Aramid sleeves CE CAT II, EN 407, EN 388 sleeve with or without thumb hole cut resistant, washable double-knit use: glass and automobile industries KAT. II UA0035KVS 35 cm without thumb hole UA0035KVS-DL 35 cm with thumb hole Contact heat up to 350 C KEVLAR Double-knit glove CE CAT II, EN 407, EN 388 double insulated knit glove, coarse knit use: glass industry, metal industry, automobile industry, etc. size: 10 KAT. II H S 35 cm 5-finger with lining ARAmid frottie glove CE CAT II, EN 407, EN 388 cut resistant, soft, very flexible, closed surface use: glass industry, assembly, automobile industry, etc. KAT. II H115B236-KVG 36 cm 5-finger ARAmid fabric glove CE CAT II, EN 407, EN 388 cut resistant, good working comfort light cotton lining insulation use: foundries, glass industry, metal industry, etc. H111B cm mitten H113B cm 3-finger H115B cm 5-finger KAT. II Preox-ARAmid glove CE CAT II, EN 407, EN 388 cut resistant, good working comfort light cotton lining insulation use: foundries, glass industry, ceramic industry, etc. H121B cm mitten H123B cm 3-finger H125B cm 5-finger KAT. II PAGE 3

4 Work protection Contact heat up to 500 C Aramid fabric glove CE CAT III, EN 407, EN 388 cut resistant, double insulation, abrasion resistant glove operational use, cost advantage use: foundries, glass industry, oven construction, etc. H111B cm mitten H111B cm mitten H113B cm 3-finger H113B cm 3-finger H115B cm 5-finger H115B cm 5-finger Aramid frottie glove CE CAT III, EN 407, EN 388 cut resistant, double insulation, abrasion resistant glove operational use, cost advantage use: foundries, glass industry, oven construction, etc. H111B130-KVS 30 cm mitten H111B140-KVS 40 cm mitten H113B130-KVS 30 cm 3-finger H113B140-KVS 40 cm 3-finger H115B130-KVS 30 cm 5-finger H115B140-KVS 40 cm 5-finger Contact heat up to 650 C Preox-Aramid fabric glove CE CAT III, EN 407, EN 388 cut resistant, special insulation glove operational use, cost advantage use: foundries, metal industry, automobile industry, etc. H121B cm mitten H121B cm mitten H123B cm 3-finger H123B cm 3-finger H125B cm 5-finger H125B cm 5-finger PAGE 4

5 Work protection Contact heat up to 800 C PBI -fabric glove CE CAT III, EN 407, EN 388 cut and abrasion resistant, special insulation use: foundries, metal industry, etc. H111B130-PBI 30 cm mitten H111B140-PBI 40 cm mitten H113B230-PBI 30 cm 3-finger H113B240-PBI 40 cm 3-finger *PBI Gold only by PBI Performance Products, Inc. Contact heat up to 900 C HT-Glass fabric glove CE CAT III, EN 407, EN 388 good mechanical use, special insulation glove operational use, cost advantage use: foundries, metal industry, tempering, steel industry, etc. H cm mitten thumb middle H cm mitten thumb middle H cm mitten thumb side H cm mitten thumb side PAGE 5

6 Work protection Contact heat up to 1100 C Aramid chain glove CE CAT III, EN 407, EN 388 abrasion resistant, special insulation glove operational use, cost advantage use: foundries, metal industry, steel industry, etc. H111B130-ST 30 cm mitten thumb side H111B140-ST 40 cm mitten thumb side HT-fabric glove CE CAT III, EN 407, EN 388 soft, flexible, special insulation will not stick to glass glove operational use, cost advantage use: glass industry, labor, high temperature ovens, etc. H cm thumb middle H cm thumb middle H cm thumb side H cm thumb side H cm 3-finger H cm 3-finger PAGE 6

7 Work protection Contact heat 500 C / 900 C handsack made of Aramid / Ht-fabric CE CAT I, EN 407 cut resistant, abrasion resistant, good mechanical use special insulation use: furnaces, foundries, steel industry, etc. EN 407 H111B140-HS 40 cm without thumb 500 C Aramid H211B140-HS 40 cm without thumb 900 C HT-fabric Contact heat 500 C / 750 C / 900 C pull over glove made of various fabrics Flexible glove exchange programm extra protection from standard gloves exchange the pull over when worn out lengthens life span of the basic glove cost advantage ÜZ cm Aramid ÜZ PBI 24 cm PBI ÜZ cm HT-glass fabric 750 C 500 C 900 C ARAMID abrasion resistant cut resistant PBI abrasion resistant cut resistant HT-Glass Fabric good mechnical use Basis Glove LENGTH VARIABLE *PBI Gold only by PBI Performance Products, Inc. PAGE 7

8 Work protection radiation heat up to 1000 C / Contact heat up to 250 C SEBATan leather/aluminium coated glove CE CAT II, EN 388, EN 407, palm: heat resistant Sebatan leather (blue) cost advantages model, firm aluminium coating up to 800 C radiation heat use: Welding, foundries, metal industry, ship repairs, etc. H05LA035-SC 35 cm 5-finger KAT. II SEBATan LEather/ALUMINIUM coated glove CE CAT III, EN 388, EN 407, palm: heat resistant Sebatan leather (brown) flexible, good use because of its soft aluminium coating up to 1000 C radiation heat use: welding, foundries, metal industry, ship repairs, etc. H01LA030 -W1 30 cm mitten H01LA038 -W1 38 cm mitten H03LA030 -W1 30 cm 3-finger H03LA038 -W1 38 cm 3-finger H05LA030 -W1 30 cm 5-finger H05LA038 -W1 38 cm 5-finger PAGE 8

9 Work protection radiation heat up to 1000 C / Contact heat up to 500 C ARAMID/ALUMINIUM Coated glove CE CAT III, EN 388, EN 407, short term up to 500 C contact heat (against splash) high cut resistancy and mechanical use good flexible use because of our soft aluminium coating use: welding, foundries, metal industry, ceramic oven, etc. H111A030-W3 30 cm mitten H111A040-W3 40 cm mitten H113A030-W3 30 cm 3-finger H113A040-W3 40 cm 3-finger H115A030-W3 30 cm 5-finger H115A038-W3 38 cm 5-finger radiation heat up to 1000 C / Contact heat up to 600 C Preox-ARAMID/ALUMINIUM Coated glove CE CAT III, EN 388, EN 407, short term up to 600 C contact heat (against splash) cut resistant and good mechanical use flexible, good use because of its soft aluminium coating use: welding, foundries, metal industry, ceramic oven, etc. H121A030-W3 30 cm mitten H121A040-W3 40 cm mitten H123A030-W3 30 cm 3-finger H123A040-W3 40 cm 3-finger H125A030-W3 30 cm 5-finger H125A038-W3 38 cm 5-finger radiation heat up to 1000 C / Contact heat up to 200 C completely ALUMINIUM Coated glove CE CAT III, EN 388, EN 407, maximum contact heat 200 C through soft aluminium coated fabric very flexible, good use special insulation use: smelters, foundries, furnaces, etc. H1A1A040-W3 40 cm mitten H1A3A040-W3 40 cm 3-finger H1A5A038-W3 38 cm 5-finger PAGE 9

10 Work protection Heat protection clothing for heat exposed industry work NEW STANDARD! Aluminized heat protection clothing certified according to Extreme temperatures of over 1000 C radiation heat need extreme protection coatings. Because of this JUTEC offers various fabric qualities. JT 260PXAHV (KA-1) Preox-Aramid fabric, ca.260g/m², with aluminium high vacuum coating light, very soft model with extrem wear comfort JT 400PXAHV (KA-2) Preox-Aramid fabric, ca. 400g/m², with aluminium high vacuum coating middle weight, very soft model with extrem wear comfort JT 650PXAHV (KA-9) Preox-Aramid fabric, ca. 650g/m², with aluminium high vacuum coating heavy, very soft model with extrem wear comfort JT 500kAHV (KA-3) Aramid fabric, ca.500g/m², with aluminium high vacuum coating heavy, very soft model with extrem wear comfort. PAGE 10

11 Work protection radiation heat up to 1000 C Heat protection jacket CE, made of heat protection fabric with aluminium high vacuum coating (KA-1, KA-3) sizes: use: foundries, steel, glass industry, etc. HSJ080KA-1 80 cm light quality HSJ080KA-3 80 cm heavy quality other fabric qualities and length upon request! Various models, for example Ruck-Zuck fastener, back open, lower arm with metal eyelets upon request. Heat protection coat CE, made of heat protection fabric with aluminium high vacuum coating (KA-1, KA-3) sizes: use: foundries, steel, glass industry etc. HSM120KA cm light quality HSM120KA cm heavy quality HSM130KA cm light quality HSM130KA cm heavy quality other fabric qualities and length upon request! Various models, for example Ruck-Zuck fastener, back open, lower arm metal eyelets upon request. Frontal heat protection coat/apron -back open- Front protection coat with Velcro (K) or metal chain (Z) fastener CE, made of heat resistant fabrics with aluminium high vacuum coating (KA-1, KA-3) sizes 48-70, back open use: foundries, steel, glass industry, etc. HSFM130KKA cm light quality with Velcro fastener HSFM130KKA cm heavy quality with Velcro fastener other fabric qualities and length upon request! Various models, for example Ruck-Zuck fastener, lower arm with metal eyelets upon request. PAGE 11

12 Work protection radiation heat protection up to 1000 C Extra add ons for aluminized heat protection clothing Back ventilation Hood Under arm ventilation Sleeve adjustment Frontal protection Ruck-Zuck fasterer (insulated) Press button (insulated) Velcro fastener Velcro fastener on the frontal protection PAGE 12

13 Work protection radiation heat up to 1000 C Heat protection TROUSERS CE, made of heat resistant fabric with alumninum high vacum coating (KA-1, KA-3) sizes with waist fastener and belt loops, without pockets use: foundries, smelters, glass industry, etc. HSH100KA cm light quality HSH100KA cm heavy quality other sizes upon request Heat protection gaiters CE, with heat resistant Velcro fastener / press-buttons made of heat resistant fabric with alumninum high vacum coating (KA-1, KA-3) use: foundries, smelters, glass industry, etc. HSG036KA-1 36 cm light quality with Velcro HSG036KA-3 36 cm heavy quality with Velcro HSG036DKA-1 36 cm light quality with press buttons HSG036DKA-3 36 cm heavy quality with press buttons other lengths upon request Heat protection hood CE, DIN made of heat resistant fabric with alumninum high vacum coating (KA-1, KA-3) with an aluminum frame for a wide angle pane and suspention loop fits a Schuberth or Voss helmet, other types upon request use: foundries, smelters, glass industry, etc. item no. description HSS000KA-1 HSS000KA-3 HSS000KA-1-GF* HSS000KA-3-GF* HSS00LKA-1 HSS00LKA-3 HSS0XLKA-1/GF* throat- and neck protection, alu frame (for pane 10 x 22 cm) throat- and neck protection, alu frame (for pane 10 x 22 cm) throat- and neck protection, alu frame (for pane 15 x 25 cm) throat- and neck protection, alu frame (for pane 15 x 25 cm) chest, neck and shoulder protection (for pane 10 x 22 cm) chest, neck and shoulder protection (for pane 10 x 22 cm) chest, neck and shoulder protection (for pane 15 x 25 cm) HSS0XLKA-3/GF* chest, neck and shoulder protection (for pane 15 x 25 cm) other sizes upon request *GF = large window 15 x 25 cm Wide angle panes for hoods made of polycarbonate (EN 166/171 in conn. EN366) or bent glass (EN 366) clear or gold steamed, protection class III high reflection active and UV protection item no. Size description HWS1022G 10 x22 cm bent bonded gold steamed glass HWS1022 Klar 10 x 22 cm bent bonded clear glass HWS1022PCG 10 x 22 cm polycarbonat pane gold steamed HWS1525G 15 x 25 cm bent bonded gold steamed glass HWS1525 Klar 15 x 25 cm bent bonded clear glass HWS1525PCG 15 x 25 cm polycarbonat gold steamed EN 531 PAGE 13

14 Work protection radiation heat up to 1000 C Facial protection with swing frame / Heat protection mask with flip glasses facial protection with swing frame, pane extra (according to page 13) heat protection mask covers ears and neck, with flip glasses material: fabric (KA-3) use: oven, construction, glass industry, etc. item no. description HSGS00KA-3 für Gesicht und Hals, ohne Scheibe HSM011KA-3 protection for ear, face and head HSM012KA-3 protection for ear, head, face and throat Helmet protection with protective tubing for aspiration / facial protection with swing frame helmet protection full protection with protective tubing for respiration helmet with oxygen supply: protects against helmet deformation adjustable, universal for many helmets, please state helmet type facial protection universal frame with swing frame and polycarbonate pane, gold steamed, with 4 clip-on, EN 166/171 i. Verb. EN 366 use: foundries, smelters, glass industry, etc. HSS- helmet type - KA-1 according to helmet type helmet protection with protective tubing HU-HH003 universal universal helmet fixture with swing frame HWS5025PCG-V 50 x 25 cm polycarbonate gold steamed with 4 clip-on position and varnish sealing neck protection neck protection with Velcro, adhesive attached to helmet extended neck protection for work helmet, please state helmet type material: fabric (KA-1, KA-3) use: foundries, smelters, glass industry, etc. item no. HSÜ001KA-3 HSN000KA-1 HSN000KA-3 description helmet protection with neck protection neck protection changeable with Velcro neck protection changeable with Velcro EN 531 EN 531 EN 531 welding pistol hand protection / Sleeves welding pistol hand protection for various types sleeve with elastic band (G) material: fabric (KA-1, KA-3, KAN / aluminum aramid) use: foundries, smelters, glass industry, etc. item no. Size description SPH001KAN standard scour proof, aluminum, ca. 650 g/m 2 HSA042GKA-1 42 cm light quality with elastic band HSA042GKA-3 42 cm heavy quality with elastic band PAGE 14

15 Work protection radiation heat up to 1000 C / Contact heat up to 600 C Heat protection apron against radiation and Contact heat CE, for chest apron with neck suspenders for waist apron with band made of different fabrics: Aramid aluminium high vacuum (KA-3), radiation heat 1000 C glass fabric with aluminium foil (KA-4), radiation heat 1000 C glass fabric with Alufix (G1), contact heat 600 C split leather approx 2,5 mm (SL-2/5), contact heat 300 C use: extreme radiation heat, welding, etc. item no. Size description HSZ1000KA x 100 cm heavy quality waist apron HSZ1000KA x 100 cm heavy quality waist apron HSS1008KA x 80 cm heavy quality chest apron HSS1008KA x 80 cm heavy quality chest apron HSS1008G1 100 x 80 cm heavy quality chest apron HSS1008SL-2/5 100 x 80 cm heavy quality chest apron Contact heat up to 600 C clothing against Contact heat CE EN 470-1, CE EN 531 heat protection jacket with Velcro fastener, sizes Preox-Aramid fabric, approx 260 g/m², very light cut resistant, flexible, soft use: cement industry, foundries, metal industry, etc. HSJ080PX 80 cm jacket with stand-up collar and without bags EN EN 531 clothing against Contact heat CE EN 470-1, CE EN 531 heat protection trouser with waist- and Velcro fastener, sizes Preox-Aramid fabric, ca. 260 g/m², very light cut resistant, flexible, soft use: cement industry, foundries, metal industry, etc. HSH100PX 100 cm trousers with waist fastener and belt loops Contact heat up to 200 C head protection hood head protection hood with eye slot made of NOMEX ca. 200 g/m², very light up to 95 C washable permanent flame resistant other models upon request item no. Size description SH standard colour nature PAGE 15

16 Work protection _12 JUTEC GmbH We reserve the rights for technical changes, no liability for print mistakes! PAGE 16 JUTEC GmbH Mellum- Strasse D O ldenburg Tel FAX E- Mail: exp or jutec. com w w w. jutec. com