Allied Tube & Conduit

(800) fax (708) Available From: Allied Tube & Conduit Printed in U.S.A. 7/98 ATC-L

A2106 Allied Tube tsteel he recycled material A1654 ISO 9002 (800) 882-5543 fax (708) 339-2399 Available From: Allied Tube & Conduit Printed in U.S.A. 7/98 ATC-L-1453-4 ONE What is Gatorshield...and Why

International Tube & Conduit Company Ltd. GALVANIZING EDGE IN TUBE TECHNOLOGY

GALVANIZING EDGE IN TUBE TECHNOLOGY ABOUT THE COMPANY ITCC is a major manufacturer of Steel Conduits, Steel Tubes, Scaffolding and Construction Props, as well as fence materials. It operates a state-of-the-art

ROUND - CARBON AND LOW ALLOY STEEL - CONTINUOUS FORMING Oil, gas, chemicals conveyance (ambient temperature)

Part 1 - Section 2 Detailed information on manufacturers 1 MAVERICK TUBE CORPORATION NORTH AMERICA General information Company founded in 1978 Nb of employees: 1000 Web site: www.maverick-tube.com Tube

MECHANICAL TUBE DIVISION

MECHANICAL TUBE DIVISION GALVANIZING Why Galvanize? PROTECTS THE STEEL Galvanizing (zinc coating) has been used to protect iron and steel from rusting for over one hundred years. Galvanizing protects steel

Solar Energy. Supporting Framing Protecting. The Strength to Deliver

Solar Energy Supporting Framing Protecting The Strength to Deliver Galvanized Steel Products For The Solar Energy Industry JMC Steel Group companies produce a wide range of products for the solar energy

Wheatland Tube A History of Quality

Mechanical Tubing Mechanical Tubing Wheatland Tube A History of Quality Wheatland Tube has more than 100 years of experience making steel tube and pipe, and is a division of the largest independent tube

PANGANG GROUP CHENGDU STEEL & VANADIUM

Overview Gen. information Country China Legal name Pangang Group Chengdu Steel & Vanadium Co., Ltd. Previous name Chengdu Seamless Steel Tube Co., Ltd, CSST Employees 18 640 Year of creation 1958 Quality

TIANDA OIL PIPE - A VALLOUREC COMPANY

Overview Gen. information Country Legal name Anhui Tianda Oil Pipe Co., Ltd Turnover 350 M USD Employees 2000 Year of creation 1993 Quality standards ISO 9002 ISO 14001 Website en.tiandapipe.com Mother

IMC REFERENCE GUIDE. A decision maker s guide to applicable codes, standards and technical data.

IMC REFERENCE GUIDE A decision maker s guide to applicable codes, standards and technical data. 2 Contents Overview of IMC:... 3 Applicable Codes and Standards to IMC... 4 Most Common National Electrical

TRICON DOUBLE-CON PLUS

TRICON DOUBLE-CON PLUS System Specifications Iron Pipe Size Steel Conduit O.D. Steel Conduit Wall Outer Insulation (IN)* Alum./Stainless/Galv. Jacket O.D. (IN) Metal Jacket Wall Thickness 1 4.50.120 1.75

accesories Culverts Raw material Corrosion-resitant coating

corrugated steel culverts RIN DR steel S Y S T E M culverts fittings accesories P Culverts Modern road construction technologies call for modern solutions. The round pipe type RING and the oval pipe type

TABLE OF CONTENTS. Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3. Pipe, Pipe Tube, Tube. Sheets & Plates

DRI1529-McNeilus-Revised 12/12/05 12:18 PM Page 1 McNeilus Steel, Inc. TABLE OF CONTENTS Page Hot Roll (Angles, Beams, Channels, Flats, Squares, Rounds) 3 Cold Roll (Flats, Hex, Rounds) 17 Pipe, Pipe Tube,

Fence SpecCheck. A53/A53M-12 Schedule 40 & Schedule 80 Pipe: Specification for Pipe, Steel, Black

Fence SpecCheck ASTM Specifications (December 2017) www.astm.org A53/A53M-12 Schedule 40 & Schedule 80 Pipe: Specification for Pipe, Steel, Black and Hot-Dipped, Zinc Coated, Welded and Seamless Schedule

ITCC provides products to comply entirely with international standards specifications; applicable standards are ASTM, BSI, & SSD.

FENCE FENCES Chain Link Fencing remains the favorite for residential and industrial needs, as it is still up to today one of the easiest and most cost effective ways to provide security and access control

Structural Channels A-36:20-40 LG. Standard Beams

Floor Plates #/Sq. Ft. 14 Ga. 3.75 12 Ga. 5.25 1/8 6.16 3/16 8.71 1/4 11.26 5/16 13.81 3/8 16.37 Plates #/Sq. Ft. 3/16 7.66 1/4 10.21 5/16 12.76 3/8 15.32 7/16 17.87 1/2 20.42 9/16 22.97 5/8 25.52 3/4

XI'AN LINKUN STEEL PIPE CO., LTD

Designation: A 50 0 (Reapproved 2005) Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing This standard is issued under the fixed designation A 50; the number immediately

1 1 4" FRAMING SYSTEM

4" FRAMING SYSTEM A000 (4 Gauge)...6-70 A00 (4 Gauge)...7-7 A4000 ( Gauge)...7-74 A000 (4 Gauge)... 7 Channel Nuts and Closure Strips...76-77 Flat Plate Fittings... 77 Ninety Degree Fittings...77-78 Z

NORTHWESTERN UNIVERSITY PROJECT NAME JOB #

SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

Profile Sheets Insulated Sandwich Panels Z & C Purlins Decking Sheets PEB Accessories Fixing Accessories Insulation Materials

EMBUILD MATERIALS is a building materials company that provides relevant and high quality products to customers. We work hard to develop and deliver the best solutions for Building material industry in

What is the difference between the material specifications for A106 Grade B Seamless pipe and A53 Grade B (Type S) seamless pipe?

WHITEPAPER WHITEPAPER: Seamless A106B & A106C vs Seamless A53B What is the difference between the material specifications for A106 Grade B Seamless pipe and A53 Grade B (Type S) seamless pipe? We are sometimes

Standard Specification for Welded Stainless Steel Mechanical Tubing 1

Designation: A 554 0 Standard Specification for Welded Stainless Steel Mechanical Tubing This standard is issued under the fixed designation A 554; the number immediately following the designation indicates

XI'AN LINKUN STEEL PIPE CO., LTD

Designation: A 554 0 Standard Specification for Welded Stainless Steel Mechanical Tubing This standard is issued under the fixed designation A 554; the number immediately following the designation indicates

Standard Specification for Welded Stainless Steel Mechanical Tubing 1

Designation: A 554 98 e An American National Standard Standard Specification for Welded Stainless Steel Mechanical Tubing This standard is issued under the fixed designation A 554; the number immediately

Service Entrance Cable Fittings

Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.

.1 American Institute of Steel Construction (AISC) Specifications for Steel Buildings AISC

05 12 00 STRUCTURAL STEEL FRAMING Page 1 of 3 1 General 1.1 SECTION INCLUDES.1 Structural steel framing and support members 1.2 RELATED SECTIONS.1 Section 05 50 00 Metal Fabrications 1.3 REFERENCES.1 American

Insulating Cellular Concrete Steel Joists Painting. A. America Society for Testing and Materials (ASTM):

SECTION 05120 STRUCTURAL STEEL PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03342 - Insulating Cellular Concrete. 2. 05210 - Steel Joists. 3. 09900 - Painting. 1.02 REFERENCES A. America Society

Electrical Metallic Tubing (EMT) Fittings

Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe

SPECIALISTS IN TUBES AND SECTIONS

SPECIALISTS IN TUBES AND SECTIONS A STRONGER, LIGHTER AND MORE SUSTAINABLE WORLD SSAB is a highly specialized global steel company and leading producer of high-quality structural hollow sections, precision

Electrical Metallic Tubing (EMT) Fittings

Suggested Specifications for Electrical Metallic Tubing (EMT) Fittings Series 2 Insulated EMT Connector (Raintight) (Compression Type) Series 20 EMT Coupling (Raintight) (Compression Type) Series 0 Pipe

The affected construction materials listed under The Fourth Schedule Subsection 33 C (1) in the Act 520, namely: 1.1 Ceramic wash basins MS 2578

SIRIM PRODUCT CERTIFICATION LICENSE (PCL) FOR THE PURPOSE OF CERTIFICATION OF STANDARDS COMPLIANCE (PERAKUAN PEMATUHAN STANDARD PPS) FOR CONSTRUCTION MATERIALS UNDER THE FOURTH SCHEDULE [Subsection 33c

Tel : , Fax : P.O Box No , Dubai Investment Park 1 Dubai - United Arab Emirates

Tel : +971 4 8858907, Fax : +971 4 8854316 PO Box No 88490, Dubai Investment Park 1 Dubai - United Arab Emirates E-mail : sales@metallicboltscom, Web : wwwmetallicboltscom About Metallic Bolts Metallic

U-BOLT MECHANICAL TEE (SADDLE-LET) Model 300U

U-BOLT MECHANICAL TEE (SADDLE-LET) U Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses please contact ARGCO. Maximum Working Pressure Up to 365

HAYNES Ti-3Al-2.5V alloy

HAYNES Ti-3Al-2.5V alloy Principal Features Lightweight, High Strength HAYNES Ti-3Al-2.5V alloy (UNS R56320) is both lightweight and strong. It has a high strength-to-weight ratio which provides a major

SECTION DECORATIVE METAL RAILINGS

SECTION 05 73 00 DECORATIVE METAL RAILINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Vertical Stainless Steel Cable Railing System. B. Horizontal Stainless Steel Cable Railing System. 1.2 RELATED SECTIONS

Product Evaluation Report

Product Evaluation Report PER-09040 Page 1 of 5 This Document Published By: Initial Listing Re-Approved 5/12/2010 Progressive Engineering Inc. 58640 State Road 15 Goshen, Indiana 46528 574-533-0337 www.p-e-i.com

1. Hangers and supports for electrical equipment and systems.

PART 1 - GENERAL... 1 1.1 RELATED DOCUMENTS... 1 1.2 SUMMARY... 1 1.3 DEFINITIONS... 1 1.4 PERFORMANCE REQUIREMENTS... 1 1.5 SUBMITTALS... 2 1.6 QUALITY ASSURANCE... 2 1.7 COORDINATION... 2 PART 2 - PRODUCTS...

STAINLESS 409 AND 439

ALUMINIZED STEEL TYPE 1 STAINLESS 49 AND 439 P R O D U C T D ATA B U L L E T I N Excellent Resistance to Pitting Corrosion from Road Salt Excellent Resistance to Muffler Condensate Corrosion Red Rust Protection

DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7

DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification

Welded Mesh - a safe solution

Welded Wire Mesh Welded Mesh - a safe solution Industry, construction and agriculture From aerospace to reinforcement in construction, our welded mesh is used in all kinds of industries. Some applications

Dexco Structural I-Beam Cantilever Racks Versatile, durable storage solutions for materials of considerable length and mass

Dexco Structural I-Beam Cantilever Racks Versatile, durable storage solutions for materials of considerable length and mass Dexco Cantilever Rack Systems offer the strength, durability and layout to store

SECTION DUCTS PART 1 GENERAL 1.01 SUMMARY

1 1 1 1 1 1 1 1 0 1 0 1 SECTION 1 DUCTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Duct Materials.. Insulated flexible ducts.. Single wall spiral round ducts.. Ductwork fabrication.. Duct cleaning.

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 1

Designation: A 269 04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 1 This standard is issued under the fixed designation A 269; the number immediately

Product Guide Specification

ALGRIP Manufactured by April 2017 104 North Maple Avenue P.O. Box 646 Leola, Pennsylvania 17540 Toll Free 800-345-8170 Fax 717-656-2041 Website www.algrip.com / www.rosstechnology.com E-mail sales@rosstechnology.com

ASK PETER: HOT DIP GALVANIZED VS. INLINE GALVANIZED STEEL

GUARD-ALL BUILDING SOLUTIONS presents ASK PETER: HOT DIP GALVANIZED VS. INLINE GALVANIZED STEEL In this paper we discuss and compare conventional (Black Steel) Hot Dipped Galvanization of structural hollow

material specifications

METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile

Metal Stock Identification

Metal Work Description Metal is produced in many different types, shapes, and forms. This activity plan provides examples of stock forms that might be found in a metal shop. Many of these shapes are common

China Yangzhou plant

China Yangzhou plant TM Marcegaglia China 714,000 sqm total area 153,000 sqm first phase covered area EN norms production quality standards Precision tubes from carbon and stainless steel Beijing Yangzhou

SHORING & UNDERPINNING 02250

Subsidiary of Hubbell Power Systems 210 North Allen St. Centralia, MO 65240 Phone: (573) 682-8414 Fax: (573) 682-8660 E-mail: hpscontact@hps.hubbell.com www.abchance.com This MANU-SPEC utilizes the Construction

Specifications Temp Fence. Wire: 84 Tall, 9ga wire, with a 2-3/8 diamond mesh size.

Specifications Temp Fence Wire: 84 Tall, 9ga wire, with a 2-3/8 diamond mesh size. Line Post: Line post will be at least 1-5/8 O.D. x 10.080. Concrete footing will be optionally used in softer conditions,

Passive Bollards Fixed and removable systems for simple, effective security

Passive Bollards Fixed and removable systems for simple, effective security Ross fixed and removable bollards are the ideal solution for perimeter protection of buildings, equipment and walkways. They

Specifications Electrical Metallic Tubing (EMT)

T& Fittings Specifications Electrical Metallic Tubing (EMT) Ref. CEC Rule 12-000 not exceeding 750 Volts Electrical Metallic Tubing (EMT) is similar to rigid steel conduit but is much lighter, weighing

STAINLESS STEEL SHEETS

STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One

SECTION SEISMIC RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENTS REVISED PART 1 GENERAL 1.1 DESCRIPTION:

SECTION 13 05 41 SEISMIC RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENTS REVISED 1-25-13 PART 1 GENERAL 1.1 DESCRIPTION: A. Provide seismic restraint in accordance with the requirements of this section

FOURTH SCHEDULE. [Subsection 33c(1)] STANDARDS FOR CERTIFICATION OF CONSTRUCTION MATERIAL

1. SANITARY WARES 1.1 Ceramic wash basins 1.2 1.3 1.4 Ceramic water closet pans without flushing cisterns Ceramic water closet pans with flushing cisterns Ceramic bidets and urinals (floor or wall mounted)

XI'AN LINKUN STEEL PIPE CO., LTD

Designation: A 334/A 334M 04a Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service 1 This standard is issued under the fixed designation A 334/A 334M;

Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service 1

Designation: A 334/A 334M 04a Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service 1 This standard is issued under the fixed designation A 334/A 334M;

API 5L ERW Pipe 168.3*( )from DPBD,TIANJIN

API 5L ERW Pipe 168.3*(3.4-21.95)from DPBD,TIANJIN Standard Grade Thickness BS EN10296, BS EN 10297, BS 6323, BS EN10219, GB/T 9711.1-1997, GB/T 3091-2001, GB/T 13793-1 992, GB/T 14291-2006, GB/T3639,

Standard Specification for Brass Rod, Bar, and Shapes 1

Designation: B 2 03 Standard Specification for Brass Rod, Bar, and Shapes This standard is issued under the fixed designation B 2; the number immediately following the designation indicates the year of

05510: TAPERED STEEL TROLLEY POLES AND ACCESSORIES

PART 1 GENERAL 1.01 DESCRIPTION A. The Vendor shall fabricate, furnish, test and deliver tapered steel trolley poles, including base plates, reinforced hand holes, anchor bolts, nuts and washers, and accessories

QATAR STEEL TUBE & PIPE CATALOGUE INDUSTRIES FACTORY (W.L.L) qatarsteelfactory.com

TUBE & PIPE CATALOGUE qatarsteelfactory.com INTRODUCTION Since 1980 Qatar Steel Industries Factory has become the leading steel manufacturer in its region and a great factor in Qatar s economic growth,

Design Standard Conduit for Electrical Systems

Design Standard Purpose: This design standard has the purpose of creating a consistent application for the installation of conduits throughout the East Side Union High School District, therefore achieving

UC Denver Guidelines and Design Standards SECTION STRUCTURAL METAL FRAMING

SECTION 05100 STRUCTURAL METAL FRAMING PART 1 - GENERAL A. This section provides general information standards. PART 2 - PRODUCTS A. Metal Studs- Structural: 1. 18 gauge and heavier units will fabricated

Marcegaglia USA Munhall

Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and

AUTOMOTIVE EXHAUST SYSTEM MATERIALS COMPARATOR

AUTOMOTIVE EXHAUST SYSTEM MATERIALS COMPARATOR AK Steel manufactures stainless steels for exhaust system components to meet lightweighting and durability requirements. Combined with industry experience

YOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS

SINCE 1953 YOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS Eight regional warehouses Over 70,000 tons in inventory ready for immediate delivery Nationwide trucking system Knowledgeable sales staff State-of-the-art

Product Guide Specification

HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier

SECTION STRUCTURAL STEEL FRAMING

PART 1 - GENERAL 1.1 DESCRIPTION SECTION 05 12 00 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // ---// if not applicable to project. Also delete any other item or paragraph

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1

Designation: A789/A789M 17 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1 This standard is issued under the fixed designation A789/A789M;

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

Harness the power of Corpac for your next project.

Corpac Steel Products is a leading global supplier and trader of pipe and steel products, specializing in line pipe, standard pipe, OCTG, conduit and structural products. Our experience in supplying complex,

Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1

Designation: A 270 01 An American National Standard Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1 This standard is issued under the fixed designation A 270;

Summary of Modifications/Changes in this Update

Summary of Modifications/Changes in this Update This Summary of Changes is for information only. It is not a part of the referenced document, and should not be used for project documentation. U.S. Department

WALCOOM. Walcoom Corporation CHAIN LINK FENCE.

WALCOOM Walcoom Corporation CHAIN LINK FENCE "Whatever your fencing need is, Walcoom can help..." For over 20 years, Walcoom Corporation has been providing professional chain link fence solutions to properties

Grades : SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347,

Unifit MetalloysInc (UMI) is one of the leading Manufacturer, Exporter and Supplier of High Quality Stainless Steel Pipes & Tubes, Flanges, Pipe Fittings, Round Bars, Sheets and Plates Etc.Stainless steel

UNSURPASSED QUALITY AND SERVICE

Penn Stainless Products Premier Processor and Supplier of Stainless Steel Products www.pennstainless.com ISO EXPANSIVE INVENTORY Penn Stainless Products, Inc. supplies quality stainless products and value-added

Tubular Products Europe

Tubular Products Europe ArcelorMittal Europe s Tubular Products division is a pan-european producer, manufacturing tubes and pipes in four countries and delivering its products through proximity agencies

The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.

The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,

2,500 63,5 63,5 2,756 70,0 70,0 2 1/2 2,875 73,03 76, ,1 2,0 2,375 60,33 60, ,3 3,0 3,500 88,90 88, ,9

«" I, l fl ( f9) ( Gh fl IE]. / -- PED 97 /23/EC Certified Co.,\. Cl 1509001. ISO l I.OHSAS 18001,\. = ' = " &lltollndil P '.td lb."1t - (SHAii SlREMAl YANNA)IJAlN ENTERPRISES) WALL THIKNESS OUTSIDE DIAMETER

Keuka Studios May 2008 SECTION {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes.

SECTION 05 73 16 {05720} CABLE RAILING SYSTEM {CABLE RAILING SYSTEM} Display hidden text for Specifier Notes. PART 1 GENERAL 1.1 SUMMARY A. Section includes cable railing system, with architectural metal

B. ASTM A 153/A 153M - Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware; 1998.

NOTE: For Specification of Pos-I-Tie brick veneer system see it's own Pos-I-Tie Specification page. For Systems with Dovetail Slots as backup see Dovetail Specificaitons page. For Systems with Channel

SECTION RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System

SECTION 13096 RADIO FREQUENCY SHIELDING ENCLOSURE RF Modular Pan System Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13096-1 RF MODULAR PAN SYSTEM PART 1 GENERAL 1.1

SECTION ROOF EDGE SAFETY RAILING SYSTEM

SECTION 07720 ROOF EDGE SAFETY RAILING SYSTEM PART 1 GENERAL 1.1 SECTION INCLUDES A. Provide and install freestanding KeeGuard Roof Edge Protection System, including pipe railings, uprights, bases, counterweights,

Standard Pole Range 5. In-Ground Mounted 6. Ground Line Protection 6. Base Plate Mounted 6. Quality & Design Standards 7. Quality Standard 7

Contents Introduction 3 Standard Pole Range 5 In-Ground Mounted 6 Ground Line Protection 6 Base Plate Mounted 6 Quality & Design Standards 7 Quality Standard 7 Design Standards 7 Design Tools 7 Manufacturing

1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.

SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2

Building Specifications for City of Pleasant Hill

1 Building Specifications for City of Pleasant Hill RECTANGULAR FABRIC TENSION MEMBRANE COVER REFERENCES Except where more stringent requirements are specified, comply with the applicable requirements

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1

Designation: A 789/A 789M 08b Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service 1 This standard is issued under the fixed designation A 789/A

The City of Winnipeg SECTION ST. VITAL LIBRARY RENOVATION PROJECT 6 FERMOR AVE. Page 1 of 5

The City of Winnipeg SECTION 05 50 00 METAL FABRICATIONS ST. VITAL LIBRARY RENOVATION PROJECT 6 FERMOR AVE. Page 1 of 5 Part 1 General 1.1 REFERENCES.1 American Society for Testing and Materials International,

HOW PIPE IS MANUFACTURED: CONTINUOUS WELD PIPE: PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

HOW PIPE IS MANUFACTURED: Production of steel pipe is grouped into two general categories: WELDED and SEAMLESS. There are many methods of producing steel pipe in current use. However. most of the pipe

SECTION STRUCTURAL STEEL

SECTION 051200 STRUCTURAL STEEL PART 1 GENERAL 1.01 SECTION INCLUDES A. Structural steel framing members and support members. B. Base plates, shear stud connectors. C. Grouting under base plates. 1.02

1510 RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS

SECTION 260533-RACEWAY AND BOXES FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section includes conduit raceways, and tubing, surface raceways, wireways, outlet boxes, pull and junction boxes, and

PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces

TECHNICAL CORRECTION January 2017 Structural PIP STF05520 Details for Pipe Railing for Walking and Working Surfaces PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process

+91-8048079109 Navgraha Steel & Engg Company http://www.navgrahasteel.com/ We are an emerging Supplier, Wholesaler, Importer, Exporter, and Trader entity specializing in best in class Stainless Steel Products.

A. Bellcore CAO-8546 Specification for Type B, C, and D Plastic Conduit. B. NEMA TC 6& PVC Plastic Utilities Duct for Underground Installation.

PART 1 GENERAL 1.01 SECTION INCLUDES This specification covers Carlon Multi-Gard multiple cell conduit system for installation of voice, data, video, and other low voltage cabling. This system may be installed

GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM

1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY

A. American Society for Testing and Materials (ASTM):

SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 03300 - Cast-In-Place Concrete. 2. 03420 - Precast, Prestress Concrete Sections. 3. 04420 - Concrete Unit Masonry. 4.

Standard Tube & Pipe Adapters

Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10,

Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing 1

Designation: A 270 03 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing 1 This standard is issued under the fixed designation A 270; the

SUPERIOR PHYSICAL SECURITY BARRIERS

F E N C E P A Y N E 32 30 00.11/PAY Buyline 6318 SUPERIOR PHYSICAL SECURITY BARRIERS P R O D U C T S SOLID SOLUTIONS E X C L U S I V E L Y B Y : 888.650.4766 www.paynefence.com M A N U F A C T U R E D