abcdef EMV/S/Kseries Vertical Multistage Centrifugal Pumps where innovation f l ow s SNG
|
|
- Silvester Green
- 5 years ago
- Views:
Transcription
1 abcdef where innovation f l ow s SNG 6869 Vertical Multistage Centrifugal Pumps EMV/S/Kseries
2 Coding System e.g. EMV 3-1 F A T XXXX XX-XXX X XX XXX X Series EMV EMVS EMVK - Cast iron pump head - Fully SS34 - Fully SS316 Nominal flow (m 3 /hr) Number of impellers (9/) = impeller, including reduced ones Connection type F = In-line round flanges in cast iron (Standard slip on type) V = Victaulic couplings, in-line ports (only for Fully SS pumps) C = Clamp couplings, in-line ports (only for Fully SS pumps) Motor Frequency/Speed A = 5Hz / pole B = 6Hz / pole *C = Dual 5Hz~6Hz / pole. Motor Rating(kW/1) e.g. 3 =.37kW 45 = 45kW Electrical arrangement T = Three-phase M = Single-phase X = Ex-proof motor Z = Special motor/voltage V = Variable speed drive (Integrates with motor) B = Bare pump Note: *Pump rated for 5Hz performance Curve ii
3 Introduction series are vertical multistage, EMV/S/K in-line port position with flange designed according to DIN standard or Victaulic coupling. Standard pumps are fitted with motor according to IEC, with motor efficiency class EF1; EF upon request. All pumps are fitted with Cartridge type mechanical seal for easy change out without removing motor and adapter or the pipes. Flange: Materials: Mounting: DIN/ANSI/JIS (slip-on type) Stainless Steel 34 or 316 with Cast iron or Stainless steel base Vertical DN 5-1 Q. to 1 m3/hr O.P. up to 4bar H up to 33m Ns up to 3,6rpm t -ºC to 1ºC Pump Standard according to ISO 996 Annex A H 4 Application: Water supply and pressure boosting for buildings, water stations, water supply network Irrigation and agriculture Washing and cleaning systems Fire fighting systems Process water systems Water treatment systems Heating, ventilation and air-conditioning RO water and desalination application 5 Hz 3 EMV EMV EMV 1 EMV 3 EMV 5 EMV 1 EMV 15 EMV 45 EMV 64 EMV Q m³/h 1
4 General Characteristics Range Hz Nominal flow [m3/h] Flow range [m3/h] Max. pressure [bar] Fluid temperature [ C] -15 to +1 Motor power [kw] Version EMV: Cast iron and stainless steel EN EMVS: Stainless steel EN 1.431/AISI 34 EMVK: Stainless steel EN 1.441/AISI 316 Motor Mains connection 1~[V/Hz] (Permissible voltage tolerance -4 V 5 Hz ± 1%) Mains connection 3~[V/Hz] (Permissible voltage tolerance ± 1%).37-. kw -4 V Δ / V Y From 3 kw V Δ Insulation class F Enclosure class IP 55 Ambient temperature 5 C EMV Pipe Connection Flange DN 5/ DN 3 EMVS, EMVK Pipe Connection Flange DN 5/ DN 3 Victaulic-connections R 1 1 / 4 DN 3 Mechanical seals SiC / SiC Seals EPDM Viton DN 5/ DN 3 DN 5/ DN 3 R 1 1 / 4 DN 3 DN 5/ DN 3 DN 5/ DN 3 R 1 1 / 4 DN 3 DN 4 DN 5 DN 5 DN 65 DN8 DN1 DN1 DN 4 DN 5 DN 5 DN 65 DN8 DN1 DN1 R DN 5 R DN 5 Standard Standard R DN 5 N/A N/A N/A N/A
5 Electrical Data/Operating & Inlet Pressures Electrical Data of Standard Motors Motor Type Nominal Current in [A] Δ Y HP KW Pole Flange Frame 3~ V 3~4 V 3~38 V 3~415 V S B14/V L L L M S M M M B5/V1 16L M L L L Operating & Inlet Pressures Stages Maximum Operating Pressure Stages Maximum Inlet Pressures EMV bar bar EMV bar bar bar EMV bar bar bar EMV bar bar 17-5 bar 7-1 bar EMV bar bar bar bar EMV bar bar bar bar EMV bar bar bar bar bar EMV bar 1-4 bar bar bar bar bar EMV bar 1-4 bar bar bar bar EMV bar 1 4 bar bar 3 bar bar 3
6 Performance Curve Model: EMV -1 EMV, EMVS, EMVK-1 5 Head 5 Hz 9 rpm NPSH-values 1 NPSH [%] 4 Efficiency Eta [kw] 1..8 Shaft pow er P 36 (P) [m³/h] (P) Ref erence no. 56/1 4
7 Dimensions and Weights EMV, EMVS, EMVK EMV-1 19 x 4.5 Flange (DIN-ANSI-JIS) PN5 / DN5 / DN3 (Optional) DN5 18 ø89 ø1 ø14 Motor P DIN flange [kw] Net weight [kg] Dimension [mm] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMVS, EMVK ø4. Flange (DIN-ANSI-JIS) PN5 / DN5 / DN3 (Optional) Victaulic 18 1 Motor Dimension [mm] Net weight [kg] P Victaulic DIN flange [kw] Victaulic DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK ø14 19 x 7 ø89 ø15 75 ø ø85 DN5 5
8 Performance Curve Model: EMV -3 EMV, EMVS, EMVK Head Hz 9 rpm [%] 6 4 NPSH-values Efficiency NPSH Eta [kw] Shaft pow er P 36 (P) (P) [m³/h] Ref erence no. 56/3 6
9 Dimensions and Weights EMV, EMVS, EMVK EMV-3 19 x 4.5 Flange (DIN-ANSI-JIS) PN5 / DN5 (Optional) / DN3 DN3 18 ø89 ø1 ø14 Motor Dimension [mm] Net weight [kg] P DIN flange [kw] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMVS, EMVK ø4. Flange (DIN-ANSI-JIS) PN5 / DN5 (Optional) / DN3 Victaulic 18 1 Motor Dimension [mm] Net weight [kg] P Victaulic DIN flange [kw] Victaulic DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK Flange (DIN-ANSI-JIS) EMVS, EMVK 3-1 PN5 / DN5.75(Optional) 389 / 6 DN EMVS, EMVK EMVS, EMVK ø14 19 x 7 EMVS, EMVK EMVS, EMVK ø89 EMVS, EMVK EMVS, EMVK EMVS, EMVK DN EMVS, EMVK ø EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK ø15 ø14 ø14 19 x 7 75 ø89 ø15 ø ø85 DN3 7
10 Performance Curve Model: EMV -5 EMV, EMVS, EMVK Head Hz 9 rpm [%] NPSH-values Efficiency NPSH Eta [kw] Shaft pow er P 36 (P) (P) [m³/h] Ref erence no. 56/5 8
11 Dimensions and Weights EMV, EMVS, EMVK EMV-5 19 x 4.5 DN3 18 Flange (DIN-ANSI-JIS) PN5 / DN5 (Optional) / DN3 ø89 ø1 ø14 Motor Dimension [mm] Net weight [kg] P DIN flange [kw] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMVS, EMVK ø4. Flange (DIN-ANSI-JIS) PN5 / DN5 (Optional) / DN3 Victaulic 18 1 ø14 19 x 7 Motor Dimension [mm] Net weight [kg] P Victaulic DIN flange [kw] Victaulic DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK 5-11 Flange (DIN-ANSI-JIS) PN5 / DN5 (Optional) / DN EMVS, EMVK EMVS, EMVK ø x EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK DN3 EMVS, EMVK ø85 EMVS, EMVK ø89 EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK ø15 ø14 75 ø89 ø15 ø14 5 DN3 ø
12 Performance Curve Head 4 Performance Curve Model: EMV -1 EMV, EMVS, EMVK-1 5 Hz 9 rpm NPSH-values 4 [%] 6 4 Efficiency NPSH Eta [kw] Shaft pow er P (P) (P) [m³/h] Ref erence no. 56/1 1
13 Dimensions and Weights EMV, EMVS, EMVK EMV-1 18 x Flange (DIN-JIS) PN16-5 / DN4 ø DN4 ø114 ø15.5 Motor Dimension [mm] Net weight [kg] P DIN flange [kw] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMVS, EMVK-1 Victaulic ø Motor Dimension [mm] Net weight [kg] P Victaulic DIN flange [kw] Victaulic DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK Flange (DIN-ANSI-JIS) PN16-5 / DN4 ulic 8 19 x 4 6 ø115 ø ø15 DN
14 Performance Curve Head Performance Curve Model: EMV -15 EMV, EMVS, EMVK-15 5 Hz 9 rpm NPSH-values 6 4 [%] Efficiency NPSH Eta [kw] Shaft pow er P 17 (P) (P) [m³/h] Ref erence no. 56/15 1
15 Dimensions and Weights EMV, EMVS, EMVK-15 EMV-15 8 EMVS, EMVK ø6.1 6 Victaulic Flange (DIN-ANSI-JIS) PN16-5 / DN5 19 x 9 6 ø17 ø165 Flange (DIN) PN16-5 / DN5 ø19 4 x ø ø15 ø165 DN5 Motor Dimension [mm] Net weight [kg] P DIN flange [kw] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV Motor Dimension [mm] Net weight [kg] P Victaulic DIN flange [kw] Victaulic DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK DN5 ø11 13
16 Performance Curve Model: EMV - EMV, EMVS, EMVK- 7 4 Head 17 5 Hz 9 rpm NPSH-values [%] Efficiency NPSH Eta [kw] 1 8 Shaft pow er P 17 (P) [m³/h] 1 (P) Ref erence no. 56/ 14
17 Dimensions and Weights EMV, EMVS, EMVK- EMV- Motor Dimension [mm] Net weight [kg] P DIN flange DIN flange [kw] EMV EMV EMV EMV EMV X ø15 Flange (DIN) PN16-5 / DN5 ø19 ø15 ø165 EMV EMV EMV EMV EMV EMV EMV DN5 Victaulic 8 EMVS, EMVK- Motor Dimension [mm] Net weight [kg] P Victaulic DIN flange [kw] Victaulic DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK ø Flange (DIN-ANSI-JIS) PN16-5/DN5 19 x 9 6 ø17 ø DN5 ø11 15
18 Performance Curve Model: EMV -3 EMV, EMVS, EMVK Head NPSH-values 5 Hz 9 rpm [%] Efficiency NPSH Eta [kw] Shaft pow er P 14 (P) (P) [m³/h] Ref erence no. 56/3 16
19 Dimensions and Weights EMV, EMVS, EMVK EMV-3 8 x ø18 3 EMVS, EMVK x ø18 3 PN / DN65 DN PN / DN65 DN ø17 ø145 ø185 ø17 ø145 ø185 Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMVS/K EMVS,/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K
20 Performance Curve EMV, EMVS, EMVK Head NPSH-values 5 Hz 9 rpm 1 [%] Efficiency NPSH Eta [kw] Shaft pow er P (P) 1 (P) [m³/h] 18
21 Dimensions and Weights EMV, EMVS, EMVK EMV-45 8 x ø18 48 PN / DN8 DN ø1 ø16 ø Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMVS, EMVK-45 8 x ø18 45 PN / DN8 DN ø1 ø16 ø Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS,/K EMVS/K EMVS/VK EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K
22 Performance Curve Head Performance Curve Model: EMV -64 EMV, EMVS, EMVK-64 5 Hz 9 rpm 6 NPSH-values 4 [%] Efficiency NPSH Eta [kw] 45 Shaft pow er P (P) 1 (P) [m³/h] Ref erence no. 56/64
23 Dimensions and Weights EMV, EMVS, EMVK EMV-64 8 x ø 48 8 x ø18 48 Flange (DN) PN5-4 / DN1 DN Flange (DN) PN16 / DN1 DN ø15 ø19 ø35 ø15 ø18 ø Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMVS, EMVK-64 8 x ø 45 8 x ø18 45 Flange (DN) PN5-4 / DN1 DN Flange (DN) PN16 / DN1 DN ø15 ø19 ø35 ø15 ø18 ø Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K EMVS/K
24 Performance Curve Head Performance Curve Model: EMV -9 EMV, EMVS, EMVK-9 5 Hz 9 rpm NPSH-values 6 4 [%] Efficiency NPSH Eta [kw] Shaft pow er P (P) 1 (P) [m³/h] Ref erence no. 56/9 - R
25 Dimensions and Weights EMV, EMVS, EMVK-9 EMV-9 45 F (DIN) PN5-4/DN1 DN F (DIN) PN16/DN1 8 x ø ø156 ø19 ø35 8 x ø18 Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV EMV ø156 ø18 ø DN EMVS, EMVK-9 45 F (DIN) PN5-4/DN1 DN F (DIN) PN16/DN1 8 x ø ø156 ø19 ø35 8 x ø18 Motor P DIN flange [kw] + Dimension [mm] Net weight [kg] DIN flange EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK EMVS, EMVK ø156 ø18 ø DN
26 4 Pumped fluid Fluid Concentration, temperature EMV, EMVS EMVK EPDM Viton EPDM Viton Acetic acid anhydride 5 C Alkaline cleaner Aluminium sulphate 1%, 5 C Ammonia water (A. hydroxide) %, 4 C Ammonia hydrogen carbonate 1%, 4 C Benzoic acid 1%, 9 C Boric acid Unsaturated solution, 6 C Butanol 6 C Calcium acetate 3%, 5 C Calcium hydroxide Saturated solution, 5 C Chromic acid 1%, C Condensate 9 C Copper sulphate Unsaturated solution, 6 C Deionic (fully desalinated water) 5 C Ethanol 1%, C Ehylene glycol/diethylene glycol 4%, 7 C Fixer 5 C Formic acid 5%, C Fruit juice 5 C Glycerine 5%, 5 C Heating oil (Light) Hydraulic oil 1%, 1 C Isopropanol Lactic acid 1%, C Linoleic acid 1%, C Linseed oil 6 C Liqueur 6 C Maize oil 8 C Maleic acid 5%, 5 C Methanol 1%, C Motor oil 1%, 8 C Oil-water-mixture 1 C Oxalic acid 1%, C Peanut oil 1%, 8 C Phosphoric acid %, C Polyglycols 9 C Polyethylene glycols 4%, 7 C Potassium carbonate 1%, 6 C Potassium hydrogen carbonate 1%, 6 C Potassium permanganate 5%, C Potassium sulphate Unsaturated solution, 8 C Rapeseed oil 1%, 8 C Silicone oil 1% Sodium carbonate 1%, 6 C Sodium hydroxide 5%, 5 C Sodium nitrate Unsaturated solution, 8 C Sodium phosphate 5%, 1 C Sodium sulphate 1%, 6 C Sulphuric acid 5%, 5 C Water Swimming pool water 35 C (EMVS) Deionic 5 C Distilled water 5 C Decarbonated water Soft water Heating water Boiler water Pure water Rinsing water (EMVS) EMV, EMVS, EMVK pumps can handle a wide variety of liquids, each with its own characteristic. EMV, EMVS Non-corrosive liquids For fluid transfer, circulation and pressure boosting of cold or hot clean water. EMVK Industrial liquids Light acids The fluids covered in the list are not complete. Data on the application limits of different pump materials when handling any of the listed fluids are considered to be the best choices. However, the table is intended as a general guide only, and cannot replace actual testing of the pumped fluids and pump materials under specific working conditions. When choosing the pump version, sufficient attention should be given to the flow medium, such as density, solidification point, viscosity as well as ex-protection requirement. The limits of applicability of the pumps, based on pressure and temperature must also be considered. Recommended
27 w h e re i n n ova ti o n fl ow s Project Applications Fire Sprinkler Pump Booster Set Pump Water Transfer Pump 5
28 Your local distributor details: Euroflo Pumps International Pte Ltd No.1 Joo Koon Way Singapore 6894 Tel: Fax:
GOULDS PUMPS. Commercial Water. e-sv General Market Specifications. Applications. Specifications
e-sv General Market Specifications Municipal, Agricultural, Light Industry, Water Treatment, Heating and Air Conditioning Applications Handling of water, free of suspended solids, in the municipal, industrial
More informationModel EVMS Vertical Multistage Pumps for the Global Market
New Products & New Techniques Model EVMS Vertical Multistage Pumps for the Global Market Hiroyuki KAWASAKI*, and So KUROIWA* Abstract As key products for the global market, new model EVMS stainless vertical
More informationHydroo s Hy5 programme defines a new pump concept focused in its 5 main drivers
VDROO SERIES Hydroo s Hy5 programme defines a new pump concept focused in its 5 main drivers Highest pump performance is related to the motor and the hydraulics detailed design. We use the highend technical
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL and BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
More information- SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS PERFORMANCE CURVE MULTIGO PERFORMANCE CURVE MULTIGO
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202-203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300-301 QUANTITY FOR
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
More informationPage - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB
SUBMERSIBLE MULTISTAGE PUMPS SB 3 CONTENENTS 50 Hz Page - SPECIFICATIONS SPECIFICATION PUMP 200 SPECIFICATION MOTOR 201 SELCTION CHART TYPE KEY-TYPE PUMP 202 PERFORMANCE CURVE SB 3 15-23-30-45 203 - CONSTRUCTIONS
More informationPressure Booster System. Hya-Eco VP. Type Series Booklet
Pressure Booster System Hya-Eco VP Type Series Booklet Legal information/copyright Type Series Booklet Hya-Eco VP KSB Aktiengesellschaft Frankenthal All rights reserved. Contents provided herein must neither
More informationPumpMeter. Type Series Booklet
PumpMeter Type Series Booklet Legal information/copyright Type Series Booklet PumpMeter All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
More informationDWC. ENCLOSED IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304. Japanese Technology since Commercial
Enclosed impeller centrifugal electric pumps stainless steel. APPLICATIONS Cooling, air conditioning and heating systems Chiller Washing systems Industrial liquids DWCN DWCV PERFORMANCE RANGE (according
More informationDiaphragm Liquid Pumps
Diaphragm Liquid Pumps Series 52 F F 12 FP 21 52 F F 12 FP 21 Product Features Self priming Dry running Oil-less, non lubricated Suitable for continuous operation (motor shaft should be horizontal) Chemical
More informationPumpMeter. Type Series Booklet
PumpMeter Type Series Booklet Legal information/copyright Type Series Booklet PumpMeter KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must neither be distributed, copied,
More informationNPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI
LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm
More informationDWC. ENCLOSED IMPELLER CENTRIFUGAL ELECTRIC PUMPS in AISI 304. Japanese Technology since Commercial
Enclosed impeller centrifugal electric pumps stainless steel. APPLICATIONS Cooling, air conditioning and heating systems Chiller Washing systems Industrial liquids DWCN DWCV PERFORMANCE RANGE (according
More informationVERTICAL MULTISTAGE PUMPS - MV SERIES - 60Hz
N IS PA VERTICA MUTISTAGE PUMPS - MV SERIES - 6Hz Boost the pressure and your confidence 9 1 : 2 8 & 141 : 2 4 C M An IS 91 & IS 141 Company A N Y ur Vision, Mission and Values To be the industry leader
More informationProduct information. UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.
Product information Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581 Description Normal priming centrifugal pumps with a double Mechanical seal Application:
More informationWARRENDER, LTD. Services. Ammonia & CO² Circulation and Transfer Pumps
WARRENDER, LTD. Seal-less Mag-Drive Pumps From Stock or Built-to-Spec Ammonia & CO² Circulation and Transfer Pumps Providing environmentally safe seal-less magnetic pumps of the highest quality for over
More informationCONTENTS 3 SPLIT CASE PUMPS 4 HORIZONTAL END-SUCTION PUMPS 5 MULTI STAGE PUMPS. HORIZONTAL 6 MULTI STAGE PUMPS. VERTICAL 7 VERTICAL IN LINE PUMPS
G IN ER EN GI NE GM BH PE N VA LV ES PU M M S MP AU RU PU INDUSTRIAL FOR WATER APPLICATIONS Water Supply Well Systems Irrigation Cooling Water Waste Water Sludge Desalination Fire Fighting CONTENTS 2 3
More informationSeries description Wilo-Drain STS 40
Series description Wilo-Drain STS 40 Series description Wilo-Drain STS 40 Subject to change 09/2008 WILO SE Wilo Catalogue C2 - - Sewage pumps from DN 32 to DN 800 Materials Pump housing: EN-GJL-250 Pedestal:
More informationPressure Booster System. Hya-Eco VP. Type Series Booklet
Pressure Booster System ya-eco VP Type Series Booklet Legal information/copyright Type Series Booklet ya-eco VP All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationG L Pumps. SSV Series. Vertical Multistage Pumps. New!! Expanded Range Capable of Flows up to 650 GPM!! Goulds Pumps.
G L Pumps SSV Series Vertical Multistage Pumps New!! Expanded Range Capable of Flows up to 650 GPM!! www.goulds.com Goulds Pumps ITT Industries SSV a tradition of Superior Multi-Stage Pump Design Building
More informationDiaphragm Liquid Pumps
Diaphragm Liquid Pumps MODELS 52 F F 12 FP 21 52 F F 12 FP 21 FEATURES Self priming Dry running Oil-less, non lubricated Suitable for continuous operation Chemical resistent pump materials for aggressive
More informationAll product images are indicative only General characteristics
submersible pumps PRODU AALOUE 04 Multi-channel open impeller All product images are indicative only eneral characteristics Multi-channel open impeller motor power poles discharge free max flow rate max
More informationSeal-less Pump Technology. Oil and Gas. Robust design - Reliability
Seal-less Pump Technology Oil and Gas Robust design - Reliability Hydra-Cell Oil and Gas Industry Pumps Compact seal-less pumps for long life and high reliability Gas Drying Pumping hot TEG With over 35
More informationMJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps
MJ / MJ-B Series Standard Non Metallic Magnetic Drive Pumps PFA PVDF CFRPVDF ISO 8 ISO 5199 EN 28 Lined Type Sealless Corrosion Resistant Chemical Pumps MJ / MJ-B Series Sealless, Fluoropolymer Lined,
More informationGRUNDFOS PRODUCT GUIDE Direct-coupled in-line single stage circulator pumps 60 Hz Table of contents 1. Product introduction Introduction pplications Cross reference guide Features and benefits 4 Identification
More informationCombiSump. Sump pump
CombiSump Sump pump CombiSump Centrifugal sump pump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system, a modular programme of single stage centrifugal
More informationSelf-Priming pumps, when it really matters
Self-Priming pumps, when it really matters Horizontal Self-Priming pump www.komak.nl Engineered pump solutions Specially designed and manufactured, by KOMAK, to operate under the most difficult conditons.
More informationNM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. Motor
lose oupled entrifugal Pumps The electropumps NM, NM, NMS, NMS series comply with the uropean Regulation no. 7/. Materials omponents NM, NMS NM, NMS Pump casing ast iron ronze Lantern bracket NM asing
More informationSMP. Single-channel closed impeller. motralec. electrical submersible pumps. General characteristics
motralec 4 rue Lavoisier. ZA Lavoisier. 95 HERBLAY EDEX el. : 0.9.97.65.0 / Fax. : 0.9.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com Single-channel closed impeller
More informationNPSH S TRAINER PTC CORROSION RESISTANT IEC close-coupled BASEPLATE in-line MACHINED TENSI
LER half open impeller SILENT spacer coupling ATEX BORN TO RESIST CORROSION compac O 2858 BACK PULL-OUT bare shaft HiEff 3D impeller solid liquid end materials S EL etic drive Viton PEEK flexible diaphragm
More informationFloat standard programme
Float standard programme A/M/K Dimension (mm):ø40 x 27 POM 18 1 20 0.9 22.5 0.8 26 0.7 T/C/I Dimension (mm): Ø30 x 44 27.5 1 30.5 0.9 34.5 0.8 39.5 0.7 R/S/U Dimension (mm):ø30 x 44 NBR 19.5 1 22 0.9 24.5
More informationSeal-less Pump Technology. Oil and Gas. Robust design - Reliability
Seal-less Pump Technology Oil and Gas Robust design - Reliability Hydra-Cell Oil and Gas Industry Pumps Compact seal-less pumps for long life and high reliability Gas Drying Pumping hot TEG With over 35
More informationAPPLICATIONS. This circulator is suitable for drinking water only. Hot water accelerated circulation in distribution loops.
OPERATING LIMITS Flow rates up to : m /h Heads up to :, m Max. operating pressure : bar Max. loop temperature : +8 C Max. circulator temperature: C Max. ambient temperature : + C Water hardness (TH) :
More informationCombiSump. Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610
CombiSump Vertical long shaft sump pump,according to ISO 2858,EN 733 (DIN 24255), API 610 CombiSump CombiSump is the sump pump solution for thin liquids. The pump is part of Johnson Pump s Combi-system,
More informationSMP. Single-channel closed impeller. submersible pumps PRODUCT CATALOGUE General characteristics
submersible pumps PRODU AALOGUE 04 Single-channel closed impeller All product images are indicative only General characteristics Single-channel closed impeller motor power,0 kw 6,4 kw poles / 4 / 6 discharge
More informationFESA PRECISION BEHIND WATER ATLANTA BRITS AUGUST 2015 MR. D VILJOEN AND MR. J VERREYNNE
FESA PRECISION BEHIND WATER ATLANTA BRITS AUGUST 2015 MR. D VILJOEN AND MR. J VERREYNNE Who is Franklin Electric Franklin Electric is the leading manufacturer of world-class pumping system solutions providing
More information50 Hz. TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS
5 Hz TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS Cod. 19171 Rev. A Ed.11/14 TCLN, TLCHN SERIES INSTALLATION POSITIONS Lowara, Xylect are trademarks of Xylem Inc. or one of its subsidiaries.
More informationSI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application:
SI-02 Electromagnetic Flowmeter for General Applications Description: Features / Universally applicable / Separate or compact measuring transmitter / Variety of lining material / DN15 to DN2000 / DIN-
More informationSubmersible Borehole Pump. Ixo N. Type Series Booklet
Submersible Borehole Pump Ixo N Type Series Booklet Legal information/copyright Type Series Booklet Ixo N All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More information50 Hz. TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS
5 Hz TLCN, TLCHN Series WET ROTOR CIRCULATORS FOR SANITARY SYSTEMS Cod. 19171 Rev. B Ed.1/14 TCLN, TLCHN SERIES INSTALLATION POSITIONS Lowara, Xylect are trademarks of Xylem Inc. or one of its subsidiaries.
More informationAll product images are indicative only General characteristics
submersible pumps PRODU AALOGUE 0 Multi-channel open impeller All product images are indicative only General characteristics Multi-channel open impeller motor power, 9, kw poles / / 6 discharge DN80 DN50
More informationFristam FZX Sanitary Liquid-Ring Pumps
Fristam FZX Sanitary Liquid-Ring Pumps Reduce Product Loss and Ensure Consistent CIP Cycles Fristam s FZX Series sanitary liquid-ring pumps provide new capabilities for handling products with entrained
More information10" Submersible Pump General Data
" Submersible Pump General Data Sr. No. Pump Components Bowl / Diffuser Impeller Wear Ring Shaft Shaft Sleeve Couple Delivery Casing Suction case Bearing Bush Strainer Screw P TYPE PUMP Cast Iron Grey
More informationFYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS
FYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS Capacities to 1500 GPM (350 m 3 /hr) Heads to 00 feet (125 m) Powers to 100 HP (75 kw) Temperatures to 200 F (93 C) Working Pressures to 200 PSI (1,380 kpa)
More informationGRUNDFOS CR range. Customised solutions
range Customised solutions Welcome to the Grundfos world of customised pumps... The Grundfos CR pump range The basic CR pump range, which applies to almost any industrial solution, is in itself the broadest
More informationPHRT HEAT PUMP WITH HYDRAULIC EQUIPMENT AIR / WATER 7 to 16 KW
TECHNICAL INSTRUCTIONS PHRT HEAT PUMP WITH HYDRAULIC EQUIPMENT AIR / WATER to KW PHRT PHRT PHRT For terminal units and boiler overhaul applications Heating Cooling PHRT.0 kw -.0 kw PHRT.00 kw -.0 kw 0.0
More informationGoulds Multistage Process Pumps
Goulds 3355 Multistage Process Pumps Multiple nozzle orientations to fit your piping configurations. Radial Suction Configuration. Radial nozzles are rotatable at 90 increments. Goulds Model 3355 Multistage
More informationClose Coupled Sealless Pumps
Fybroc Division SERIES 2 ASME/ANSI SPECIFICATION B73.1 DIMENSIONS SERIES 26 SELF-PRIMING Close Coupled Sealless Pumps B U L L E T I N 2B1 FYBROC SERIES 2 CLOSE-COUPLED SEALLESS PUMPS Capacities to 60 GPM
More informationElectromagnetic flowmeters. dg: NEW. Sensor MUT 2200 EL DS100-2-ENG 1/12
Electromagnetic flowmeters dg: www.oryana.com.ar NEW Sensor MUT EL DSENG 1/ Sensor MUT EL MUT EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water cycle and process applications.
More informationGRUNDFOS INDUSTRIAL SOLUTIONS. Grundfos CM CM/CME COMPACT PUMPS FOR DEMANDING APPLICATIONS
CM/CME COMPACT PUMPS FOR DEMANDING APPLICATIONS GRUNDFOS INDUSTRIAL SOLUTIONS Grundfos CM COMPACT, FLEXIBLE, RELIABLE SOLUTIONS FOR TIGHT SPACES CM stainless steel Grundfos Centrifugal Modular (CM) pumps
More informationVERTICAL MULTISTAGE PUMPS - MV SERIES - 60Hz
N IS PA VERTICAL MULTISTAGE PUMPS - MV SERIES - 6Hz Boost the pressure and your confidence O 9 1 : 2 8 & 141 : 2 4 C O M An ISO 91 & ISO 141 Company A N Y Our Vision, Mission and Values To be the industry
More informationClose Coupled Sealless Pumps
Fybroc Division SERIES 2530 ASME/ANSI SPECIFICATION B73.1 DIMENSIONS SERIES 2630 SELF-PRIMING Close Coupled Sealless Pumps B U L L E T I N 25B1 FYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS Capacities
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y. Vertical Sump Pumps
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Vertical Sump Pumps For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y. Vertical Sump Pumps
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Vertical Sump Pumps For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen
More informationThe Liquiflo POLY-GUARD TM
A Revolutionary Innovation in Chemical Pump Technology... The Liquiflo POLY-GUARD Polymer-Lined Stainless Steel Gear Pump...The Ultimate Solution for Pumping Corrosive Chemicals Combines the chemical resistance
More informationb) General instructions and documents to be submitted by an interested company:
REFERENCE: EOI/675/2015 Date: July 23, 2015 Dear Sir / Madam, United Nations Development Programme in Belarus (UNDP) invites companies to submit Expressions of Interest in participating in the subsequent
More informationGPS-BLC, ASG and ISO series. Stainless Steel Centrifugals pumps GLOBAL PUMP SOLUTIONS
GPSBLC, SG and ISO series Stainless Steel Centrifugals pups 5z ydraulic Inforation GPSBLC series stainless steel pups ydraulic Inforation GPSBLC series stainless steel pups GPSBLC series in Stainless Steel
More information60Hz. Route range ZMR. mechanical sealed TMR. magnetical driven. centrifugal pumps in thermoplastic materials
6Hz Route range ZMR mechanical sealed TMR magnetical driven centrifugal pumps in thermoplastic materials 2 Route TMR - ZMR In this catalog Argal proposes the range of ROUTE pumps, inclusive of magnetical
More informationFlygt 3171, 50Hz. Technical Specification
Flygt 3171, 50Hz Technical Specification Table of Contents Table of Contents F-pump, Standard Motor...2 Product description...2 Motor rating and performance curves...5 F-pump, Premium Efficiency Motor
More informationIn-line Twin Pump. Type Series Booklet. Omega DSL
In-line Twin Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
More informationLife Sciences Applications. Hygienic, sterile, safe: Our solutions for the beverage industry.
Life Sciences Applications Hygienic, sterile, safe: Our solutions for the beverage industry. 2 Introduction The right choice for sterile processes: pumps made by KSB. For us, thinking ahead means thinking
More informationSAMSON LIQUID RING VACUUM PUMPS. 33 mbar absolute to 1013 mbar absolute. DATASHEET ME-SERIES DOC1005A
TRUCKS FOOD OFFSHORE FISH PROCESS DATASHEET ME-SERIES DOC1005A ME-SERIES Range: 33 mbar absolute to 1013 mbar absolute. Capacity: From 50 m3/h to 165 m3/h Index Page About SAMSON PUMPS...4 Materials...5
More informationHYDRO SERIES 11K2-15K2 LIMITS TO USE
OPEN IMPELLER 5 Hz HYDRO SERIES 11K2 15K2 USE Submersible electric pumps suitable for the lifting of clear and dirty water. They are especially used in building yards and for pumping abrasive liquids.
More informationSURFACE CENTRIFUGAL ELECTRIC PUMPS
PUMPS, MOTORS and CONTROLS MANUFACTURING Made in Italy SURFACE CENTRIFUGAL ELECTRIC PUMPS VALCO International trademark Manufacturing Group established in Italy in 1976 worldwide. Works, Pump & Test Laboratory,
More informationThe power of proven technology PLR. Triplex Reciprocating Plunger Pump API 674 (ISO 13710)
The power of proven technology PLR Triplex Reciprocating Plunger Pump API 674 (ISO 13710) General Design Description The plunger pumps are designed in accordance with the latest revision of API674 and
More informationN-pump, Standard Motor
N-pump, Standard Motor N-pump, Standard Motor Product description Usage Installation type P, S, T, Z Installation type L A submersible pump for efficient pumping of clean water, surface water, and wastewater
More informationPAHT C pumps ATEX PAHT C pump
MAKING MODERN LIVING POSSIBLE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Data sheet ATEX PAHT C pump hpp.danfoss.com Table of Contents 1. Introduction...2 2.
More informationProcess Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
More informationOPTIMASS 7400 Technical Datasheet
OPTIMASS 7400 Technical Datasheet Sensor for mass flow The optimum meter for demanding applications A single straight measuring tube Choice of 4 tube materials The documentation is only complete when used
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 302
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 203 PERFORMANCE CURVE VOX 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW
More informationCombiSump. Vertical long shaft sump pump, according to ISO 2858, EN 733, API 610 (VS4)
CombiSump Vertical long shaft sump pump, according to ISO 2858, EN 33, API 6 (VS4) Johnson Pump, An SPX FLOW Brand CombiSump SPX FLOW develops, manufactures and markets Johnson Pump branded positive displacement
More informationThermostatic Control Valve
Thermostatic Control Valve Model R - Cast Steel Typical applications Refrigeration compressors Industrial compressors Turbines Engines Gear boxes High pressure applications R Valve Range Key benefits No
More informationEND-suction GRUNDFOS GRUNDFOS NB/NK
GRUNDFOS NB/NK Grundfos offers a virtually limitless range of closecoupled (NB) and long-coupled (NK) end-suction pumps, whose sturdiness and reliability make them ideal for use in demanding environments.
More informationALTOFLUX IFS 4000/4005
KROHNE 03/2002 7.02351.22.00 GR ALTOFLUX IFS 4000/4005... result of more than 40 years experience with electromagnetic flowmeters Liner made of KROHNE Teflon -PFA or other fluorines Dimensionally stable,
More informationGRUNDFOS PRODUCT GUIDE. Direct-coupled in-line single stage circulator pumps 60 Hz
GRUNDFOS PRODUCT GUIDE Direct-coupled in-line single stage circulator pumps 60 Hz Table of contents 1. Product introduction Introduction pplications Cross reference guide Features and benefits Identification
More informationARI-STEVI 440 / 441 (DN15-250) Control valve - straight through With pneumatic and electric actuators
ARI-STEVI 4 / 441 (DN15-0) Control valve - straight through With pneumatic and electric actuators ARI-STEVI 4 / 441 Pneumatic actuator ARI-DP 32-34 Tri Reversible pneumatic actuator Actuator with rolling
More informationTip. For detailed information on the motors please refer to pages
48 49 We select the materials with regard to the liquids to be pumped. Both the pump tube models feature an extremely resistant pure carbon bearing and there are no grease fillings in the shaft tube, so
More informationFig. 405 / 460 (DN15-500) Stop valve - straight through With pneumatic and electric actuators
Fig. 405 / 460 (DN15-500) Stop valve - straight through With pneumatic and electric actuators Fig. 405 / 460 Pneumatic actuator ARI-DP 32-35 Reversible pneumatic actuator Actuator with rolling diaphragm
More informationM21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationM21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
More informationVersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
More informationWilo MC Self Priming, Horizontal Multi-Stage, High Pressure Pumps. Engineering Specification
Wilo MC Self Priming, Horizontal Multi-Stage, High Pressure Pumps Engineering Specification PART 1 - GENERAL 1.1 SUMMARY A. Furnish and install horizontal multi-stage, high pressure, self priming pressure
More informationVersaFlow Coriolis 200 Sensor for Mass Flow Specifications
VersaFlow Coriolis 200 Sensor for Mass Flow Specifications 34-VF-03-12 June 2011 The Solution for Bulk Mass Flow Measurement The VersaFlow Coriolis 200 has been developed to meet the demanding transfer
More informationNessie Pumps type PAH 2/4/6.3, 10/ /32 and PAH 50/63/70/80
Data Sheet Nessie Pumps type PAH 2/4/6.3, 10/12.5 25/32 and PAH 50/63/70/80 Generally PAH 2/4/6,3, 10/12,5, 25/32 and 50/63/70/80 are pumps designed to supply water flow under high pressure. The pumps
More informationGlycerine filled Bourdon tube pressure gauges EN 837-1
Application For gaseous and liquid media which are not highly viscous, do not crystallize and do not attack copper alloys. For measurement in areas with high levels of vibration and high, dynamic pressure
More informationEC medium pressure axial fans.
EC medium pressure axial fans. The efficient system solution. The engineer s choice GreenTech EC technology in a new dimension. Thanks to these new new axial axial fans, fans, our our highly highly efficient
More informationThermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
More informatione-hm TM Series HM..P - HM..S - HM..N 60 Hz
6 Hz e-hm TM Series HM..P - HM..S - HM..N THREADED HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS EQUIPPED WITH IE3 MOTORS COMPLYING WITH IEC 634-3 Cod. 1911381 Rev. B Ed.3/214 e-hm SERIES HYDRAULIC
More informationFlygt 3057, 50Hz. Technical Specification
Flygt 3057, 50Hz Technical Specification Table of Contents Table of Contents C-pump...2 Product description...2 Motor rating and performance curves...4 D-pump...6 Product description...6 Motor rating and
More informationCO-SHO Series. COF-CEF Series. Lenntech. 50 Hz. Tel Fax
50 Hz CO-SHO Series CENTRIFUGAL PUMPS WITH OPEN IMPELLER EQUIPPED WITH IE2/IE3 MOTORS COMPLYING WITH REGULATION (EC) no. 640/2009 COF-CEF Series CENTRIFUGAL PUMPS BARE SHAFT Lenntech info@lenntech.com
More informationSANITARY CENTRIFUGAL PUMPS CLOSED COUPLED WITH STANDARD MOTOR CSA SERIES
SANITARY CENTRIFUGAL PUMPS CLOSED COUPLED WITH STANDARD MOTOR SERIES CSA 13 SIMPLICITY - MODULARITY - PRECISION - EFFICIENCY The pumps series CSA are centrifugal pumps specifically designed for the foodstuff,
More informationClose Coupled Sump Pumps Type ETLB
Close Coupled Sump Pumps Type ETLB»dry running safe«technical data Flow rate Q up to 104 m 3 /h Head H up to 36 m Submersion depth up to 775 (795) mm Suction extension up to 1500 mm Materials limits of
More informationVersaFlow Coriolis 1000 Mass Flow Sensor Specifications
VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available
More informationFybroc Close Coupled Sealless Pumps FYBROC SERIES 2530 ASME/ANSI SPECIFICATION B73.1 DIMENSIONS FYBROC SERIES 2630 SELF-PRIMING
FYBROC SERIES 2530 ASME/ANSI SPECIFICATION B73.1 DIMENSIONS FYBROC SERIES 2630 SELF-PRIMING Fybroc Close Coupled Sealless Pumps B U L L E T I N 2 5 B 1 FYBROC SERIES 2530 CLOSE-COUPLED SEALLESS PUMPS Capacities
More informationSetting Mechanical Seals
GB Setting Mechanical Seals Style 890 Single Stationary Multiple Spring Cartridge Flush connection Drive mechanisms external to the product; Seal faces positioned for maximum protection; A dynamic elastomer
More informationVIKING. Serving Applications For: Ambient-Temperature Solids Temperature-Critical Processes Extreme Environments
Jacketed Internal Gear Pumps VIKING Serving Applications For: Ambient-Temperature Solids Temperature-Critical Processes Extreme Environments Flows: to 1500 GPM (340 m3/hr) Pressures: to 280 PSI (20 Bar)
More informationKTDA SEMINAR 2017 D&S RANGE OF PUMPS 1
KTDA SEMINAR 2017 D&S RANGE OF PUMPS 1 24 th Aug, 2017 Presented by: Rose Chemiat 1 INTRODUCTION Content Water Booster Pumps for Water Supply Industrial Application Dewatering & Waste water pumps Commercial
More informationMIT - GemmeCotti Magnetic Coupling Centrifug Pumps
MIT - GemmeCotti Magnetic Coupling Centrifug Pumps Our Main Focus Heat Transfer Section Plate Heat Exchangers Brazed Heat Exchangers Flat Access Stations Shell and TubeHeat Exchangers Pressure Vessel Section
More information