SECTION (10800) - TOILET, BATH, AND LAUNDRY ACCESSORIES

Size: px

Start display at page:

Download "SECTION (10800) - TOILET, BATH, AND LAUNDRY ACCESSORIES"

Chloe Andrews
5 years ago
Views:

1 SECTION (10800) - TOILET, BATH, AND LAUNDRY ACCESSORIES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Toilet Accessories 2. Bath Accessories 3. Attachment hardware B. Related Sections: 1.02 REFERENCES 1. Section Sustainable Design Requirements 2. Section (05500) - Metal Fabrications 3. Section (06100) - Rough Carpentry: Blocking 4. Section (08800) - Glazing: Unframed mirrors, tub and shower glass 5. Section (09310) - Tiling: Coordinate installation of accessories 6. Section (10165) - Toilet Compartments: Coordinate installation of accessories 7. Section Tub and Shower Doors: Coordinate installation A. ASTM International Publications: 1. A167 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip 2. A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar B. American National Standards Institute (ANSI) 1. ICC/ANSl A , Accessible and Useable Buildings and Facilities C. Americans with Disabilities Act (ADA) II Public Accommodations D. Code of Federal Regulations (CFR) Publications: 1.03 SUBMITTALS CFR, Part 59, Subpart D 2001, "National Volatile Organic Compound Emission Standards for Architectural Coatings" A. General: Submit the following in accordance with Conditions of Contract and Division 01 Specification Sections. 1. Product Data: Mark each copy to identify applicable products, characteristics, models, options and other supplemental data to clearly communicate information specific to this project. B. LEED Submittals: 1. Credit MRc4.1 and 4.2: Recycled Content: a. List of proposed materials with recycled content. PAGE 1 FILE: a-CFRST-Toilet Bath And Laundry Accessories REVISED: 12/01/ , Marriott International, Inc. CFRST SPECMSTR-NEW BUILD

2 b. Product Data or other documentation for each product/material highlighting recycled content information. c. Complete the LEED Materials Submittal Form as provided in Section Submittal and Substitution Procedures, for products in this Section. 2. Credit EQc4.1: Low-Emitting Materials: VOC Data for Adhesives and Sealants: 1.04 QUALITY ASSURANCE a. Product Data or other documentation for each product/material highlighting VOC content information. 1) Refer to VOC limit tables in Section Indoor Air Quality Requirements for VOC limits for adhesive and sealant products in this Section. b. Complete the LEED VOC Submittal Form as provided in Section Submittal and Substitution Procedures, for products in this Section. A. Provide products of the same manufacturer for each type of accessory unit and for units exposed in the same area DELIVERY, STORAGE, AND HANDLING A. Do not deliver accessories to site until rooms in which they are to be installed are ready to receive them. B. Store packages to prevent physical damage or wetting. C. Pack accessories individually in a manner to protect accessory and its finish. D. Maintain protective covers on all units until final clean-up. E. Protection: Protect adjacent or adjoining finished surfaces and work from damage during installation of work of this Section WARRANTY A. Work of this Section shall be jointly warrantied by the manufacturer and the installer for a period of one year after final payment. Any material or workmanship that is judged defective during this period shall be replaced at no cost to the Owner. PART 2 PRODUCTS 2.01 DISTRIBUTORS A. Avendra, LLC Preferred Distributor: 1. Contract Hardware, Inc. ( ) a. Contact: Mark Tew 2. Home Depot Supply 2.02 MANUFACTURERS a. Contact: Rajan Batra ( ) A. See Toilet & Bath Accessory Matrix for list of which Manufacturer's are approved for use on a specific item. B. Avendra, LLC Preferred Manufacturers: 1. Franklin Brass, Liberty Hardware Manufacturing Corp., A Masco Company ( ) PAGE 2 REVISED: 12/01/15 FILE: a-CFRST-Toilet Bath And Laundry Accessories CFRST SPECMSTR-NEW BUILD 2015, Marriott International, Inc.

3 2. WingIts LLC ( ) C. Approved Manufacturers: 1. American Specialties, Inc. (ASI) ( ) 2. Bobrick Washroom Equipment, Inc. ( ) 3. Gamco, A Bobrick Company ( ) 4. Hafele America Co. (HEWI) ( ) 5. Preferred Bath Accessories LLC. ( ) 6. Mincey Marble Manufacturing Co. ( ) 7. Shower Solutions USA, Inc. ( ) 8. Delta Faucet Company ( ) 9. Granite Tech, Inc. ( MATERIALS - TOILET ACCESSORIES A (Type 302) stainless steel alloy of at least 22 gauge in all elements of cabinet work. Unless shown otherwise, all exposed stainless steel to have a #4 Satin finish or Satin chrome finish where applicable with all elements of a unit to have brushing in one direction. B. Recycled Content: 1. Recycled Content Provide products with an average recycled content of steel products so postconsumer recycled content plus one-half of preconsumer recycled content is not less than [25]. C. Exposed surfaces to be protected with a factory applied PVC film to be left in place until final clean-up. D. Mirrors to be 1/4" polished plate glass with 10-year guarantee against silver spoilage. E. Stainless steel tubing: 18 ga., Type 304, seamless welded. F. Fasteners, screws, and bolts: Hot dip galvanized. Expansion shields: Fiber, lead, or rubber as recommended by accessory manufacturer for component substrate. G. Adhesive: Epoxy type contact cement FINISHES A. Guest Rooms: Refer to Toilet & Bath Accessory Matrix for Finishes. B. Employee and Public Toilet Rooms: Refer to Toilet & Bath Accessory Matrix for Finishes. C. Exposed heads of fasteners shall match finish of accessory FABRICATION - TOILET ACCESSORIES A. Provide steel anchor plates and anchor components for installation on building finishes. B. Form surfaces flat without distortion. Maintain flat surface without scratches or dents. C. Back paint components where contact is made with building finishes to prevent electrolysis. D. Hot dip galvanize ferrous metal anchors and fastening devices. E. Shop assemble components and package complete with anchors and fittings. PAGE 3 FILE: a-CFRST-Toilet Bath And Laundry Accessories REVISED: 12/01/ , Marriott International, Inc. CFRST SPECMSTR-NEW BUILD

4 PART 3 EXECUTION 3.01 PREPARATION A. Deliver inserts and rough-in frames to job site and in appropriate time for building-in. Provide templates and rough-in measurements as required. B. Before starting work, notify Owner s Representative in writing of any conflicts detrimental to installation or operation of units. C. Verify with Owner s Representative exact location of accessories INSTALLATION A. Install fixtures, accessories, and items in accordance with manufacturer's printed instructions. B. Use concealed fastenings wherever possible. C. Install true, plumb, and level, securely and rigidly anchored to substrate in accordance with manufacturer's instructions for each item and each type of substrate construction. 1. Wood blocking shall be provided at grab bars and fold down shower seats, and as shown on Drawings. 2. Strap metal may be used for all other areas, as approved by Owner s Representative, unless indicated otherwise. D. Fasteners for all accessory mounting to be theft-resistant. PART 4 ACCESSORY SCHEDULE Note: Refer to Toilet & Bath Accessory Matrix (Separate Electronic File) Revision Log END OF SECTION PAGE 4 REVISED: 12/01/15 FILE: a-CFRST-Toilet Bath And Laundry Accessories Comment [Comment1]: Page: 5 REVISION LOG: Page: 5 12/01/00: Revise Accessory Schedule 02/07/01: Revise Accessory Schedule 08/17/01: Add Revision Log. 09/01/01: Change Marketplace to Avendra, LLC. 09/11/01: Revise/Clarify Text; Revise Paragraph Numbering 05/22/02: Revise Accessory Schedule 06/28/02: Added Champagne Finish; Revised Schedule to show Finishes. 10/02/02 Changed HEWI to Hafele America Co. 10/21/02: Revised Franklin Brass Model Numbers 11/13/02: Revised entire Accessory Matrix and added as separate electronic file. 06/02/03: Added Approved Distributors 12/31/03: Changed Franklin Brass Company Name to add Bath Unlimited. 12/31/03: Changed McKinney/Parker to American Specialties 12/31/03: Added C.R. Laurence Company 12/31/03: Deleted C.D. Sparling 12/31/03: Added Shower Door and Glass Panel for Courtyard Only. 03/26/04: Revised Courtyard for Champagne Finish as standard and satin chrome/stainless for Alternate Finish. 03/26/04: Revised SpringHill Suites to delete Champagne Finish as standard and add satin chrome/stainless for standard. 06/08/04: Added WingIts LLC to list of approved manufacturers. 09/30/05: Revised Franklin Brass from "Approved Manufacturer" to "Avendra, LLC Preferred Manufacturer" 09/30/05: Added Home Depot Supply as an "Avendra, LLC Approved Supplier". Moved WinIts LLC from "Approved Manufacturer" to "Avendra, LLC Preferred Manufacturer" 12/30/05: Revised to 2006 Format 03/31/06: Revised Courtyard to delete Champagne Finish as standard and add satin chrome/stainless for standard. 09/29/06: Revised Masco to "A Bobrick Company" / Deleted Pleasants Hardware Company as Approved Distributor. 01/05/07: Updated to 2007 Format 09/28/07: Updated to 2007 Section Format. 11/17/07: Added approved manufacturers for SpringHIll Suites Gen 4 Projects. 03/31/08: Added Frameless Glass Shower Door as option for Fairfield Whirlpool Guestroom. Changed glass from frosted to clear glass. 06/30/08: Added Continental Group as approved manufacturer for Glass Shower Doors and side panels. 09/29/08: Changed fixed glass at Courtyard Tub Seat to be frosted finish. 01/01/09: Revised Section Number and Title for Tiling.... [1] CFRST SPECMSTR-NEW BUILD 2015, Marriott International, Inc.

5 Page 4: [1] Comment [Comment1] Master Specification 20/11/ :25:00 p.m. Page: 5 REVISION LOG: Page: 5 12/01/00: Revise Accessory Schedule 02/07/01: Revise Accessory Schedule 08/17/01: Add Revision Log. 09/01/01: Change Marketplace to Avendra, LLC. 09/11/01: Revise/Clarify Text; Revise Paragraph Numbering 05/22/02: Revise Accessory Schedule 06/28/02: Added Champagne Finish; Revised Schedule to show Finishes. 10/02/02 Changed HEWI to Hafele America Co. 10/21/02: Revised Franklin Brass Model Numbers 11/13/02: Revised entire Accessory Matrix and added as separate electronic file. 06/02/03: Added Approved Distributors 12/31/03: Changed Franklin Brass Company Name to add Bath Unlimited. 12/31/03: Changed McKinney/Parker to American Specialties 12/31/03: Added C.R. Laurence Company 12/31/03: Deleted C.D. Sparling 12/31/03: Added Shower Door and Glass Panel for Courtyard Only. 03/26/04: Revised Courtyard for Champagne Finish as standard and satin chrome/stainless for Alternate Finish. 03/26/04: Revised SpringHill Suites to delete Champagne Finish as standard and add satin chrome/stainless for standard. 06/08/04: Added WingIts LLC to list of approved manufacturers. 09/30/05: Revised Franklin Brass from "Approved Manufacturer" to "Avendra, LLC Preferred Manufacturer" 09/30/05: Added Home Depot Supply as an "Avendra, LLC Approved Supplier". Moved WinIts LLC from "Approved Manufacturer" to "Avendra, LLC Preferred Manufacturer" 12/30/05: Revised to 2006 Format 03/31/06: Revised Courtyard to delete Champagne Finish as standard and add satin chrome/stainless for standard. 09/29/06: Revised Masco to "A Bobrick Company" / Deleted Pleasants Hardware Company as Approved Distributor. 01/05/07: Updated to 2007 Format 09/28/07: Updated to 2007 Section Format. 11/17/07: Added approved manufacturers for SpringHIll Suites Gen 4 Projects. 03/31/08: Added Frameless Glass Shower Door as option for Fairfield Whirlpool Guestroom. Changed glass from frosted to clear glass. 06/30/08: Added Continental Group as approved manufacturer for Glass Shower Doors and side panels. 09/29/08: Changed fixed glass at Courtyard Tub Seat to be frosted finish. 01/01/09: Revised Section Number and Title for Tiling. 01/01/09: Revised model numbers and finishes for Courtyard Glass Shower Door. Added Continental Group as approved manufacturer for Courtyard Fixed Glass panel at

6 tub seat. Relocated SpringHill Shower Glass Door from Toilet & Bath Accessory Matrix to this Section. 07/01/09: Updated Glass Shower Doors, added wall bumper for door. 04/01/10: Added new design for Glass Shower Door 176 and added ProjectStone products for Glass Shower/Tub Seat Systems. 06/01/10: Added CFRST LEED Volume Program specifications. 01/01/11: Removed Door Bumper from Glass Shower Door /01/11: Deleted 2-sidelite design for Glass Shower Door 176. Revised Finishes for 175 and /03/11: Updated references for SpringHill Suites Gen 4.5 and Fairfiled Inn & Suites Gen 4. 05/01/12: Added Symmons as approved manufacturer for Residence Inn Gen 9. 05/01/12: Added Glass Shower Enclosures for Residence Inn Gen 9. 09/03/12: Removed references to SpringHill Suites Gen 4. 01/01/13: Added Preferred Bath Accessories to list of approved manufacturers for Fairfield Inn & Suites Gen 4. 01/01/13: Revised Glass Shower Door w/fixed Panel mark numbers to revised mark numbers for Fairfield and SpringHill. 01/01/13: Revised Continental Group telephone number. Updated Continental U- Channels for shower assemblies from 3/4" to 1". 01/01/13: Added MPL Corporation as an approved manufacturer. 05/01/13: Added Courtyard Gen 5 Shower Panel and optional Shower Panel with Door. 05/01/13: Updated list of approved manufacturers. 09/03/13: Added Symmons Shower Door Pull to Courtyard 452OPT. 05/05/14: Revised Fairfield Glass Shower Door and Fixed Panel 460, including revising Door Pull. 02/04/15: Added Fixed Glass Panel 453 for TownePlace Gen 4. 06/08/15: Revised Fixed Glass Panel 452 from frosted to clear glass for Courtyard Gen 5. 06/08/15: Added Mincey and Continental as approved manufactureres for Coourtyard, Residence & TownePlace 12/01/15: Moved Tub and Shower Glass Doors and Panels to Section

Hamilton International Air Cargo Logistics Facility Section November 2014 Page 1 of 4

Hamilton International Air Cargo Logistics Facility Section 10 21 14 METAL TOILET COMPARTMENTS Page 1 of 4 Part 1 General 1.1 SECTION INCLUDES.1 Metal toilet compartments, floor mounted. 1.2 RELATED SECTIONS.1