National Guard Products, Inc. The products you count on. The people you trust.

Transcription

1

2 Phone: Fax: ymbols/ Legend ymbols/legend ADA COMPLIANT Barrier Free Thresholds meet the requirements of the 2010 ADA tandards for Accessible Design and ICC/ANI A Accessible and Usable Building and Facilities. POITIVE PREURE CLAIFIED by UL to ANI/UL; complies with IBC, NFPA 80 and NFPA 252 for application to teel fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes. (Ratings on some items vary and are noted.) CLAIFIED by UL to ANI/UL10B and CAN/ULC-104; complies with NFPA 80 and NFPA 252 for application to teel fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes. (Rating on some items vary and are noted.) E NGP-EDGE EALING YTEM, Classifed by UL to ANI/UL Category G ; required for Category B wood fire doors to meet positive pressure requirements complying with IBC, and NFPA 252. ee individual products for maximum door size and ratings. MOKE & DRAFT CONTROL GAKETING, Classified by UL to ANI/UL Category H ; complies with IBC, UL1784 and NFPA 105 for use on labeled Positive Pressure teel fire doors rated up to 3 hours, and wood fire doors rated up to 90 minutes. (Ratings on some items vary and are noted.) ACOUTICAL TETED to ATM E90 tandard Test Method for Laboratory Measurement of Airborne ound Transmission Loss of Building Partitions and Elements, and ATM E1408 tandard Test Method for Laboratory Measurement of the ound Transmission Loss of Door Panels and Door ystems. Refer to chart on page G5 for test result data. Gasketing for use with Door Closers MRA 2 8 H 7 Gasketing Compatible with Door Closers olid aluminum 700 eries: No break in seal Head not drilled ide sections are furnished with slotted holes for adjustment Comes with self drilling #8 (Tek type) screws. Closer and/or hold open device to be attached to frame through weatherseal section. A - clear B - gold DKB - dark bronze AIR INFILTRATION TETED to ATM E283, tandard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors. ANTI-MICROBIAL Proven to be up to 99% effective at killing a wide range of bacteria including MRA and. Independent laboratory tested to meet IO 22196:2011. ANI/BHMA CERTIFIED. Certified gasketing complies with American National tandard for Door Gasketing and Edge eal ystems ANI/BHMA A , and is listed in the BHMA Certified Products Directory. Online product listings: 700NA 700NB 700NDKB 700A 700B 700DKB NGP, Inc

3 elf-adhesive Gasketing ilicone Bulb Fire and moke eal 5050B Brown 5050C Charcoal 5050W White 5050T Tan 5050CL Clear Available in 17, 20, 21, 25 and 300 rolls. E Edge ealing ystem - Category G for 20 minute rated category B wood doors perimeter application up to: single swing x 8 0 pairs x 8 0 use 9550 at the meeting edge of pairs moke and Draft Control - Category H - Up to 3 hours steel fire doors; Up to 90 minutes wood fire doors Meets requirements of ROH Directive 2002/95/EC moke eals TPE Batwing moke eal 5020B Brown 5020C Charcoal 5020W White 5020CL Clear Available in 36, 48, 72, 84, 96 and 108 lengths MRA TPE Double hark Fin moke eal 5070B Brown 5070W White 5070CL Clear moke rated for perimeter and/or meeting edge (Astragal) applications MRA Available in 36, 48, 72, 84, 96 and 108 lengths TPE Triple Fin moke eal 3/8" 5075B Brown 5075W White 5075CL Clear Available in 36, 48, 72, 84, 96 and 108 lengths MRA 9550 NGP-Edge Intumescent with TPE Fins Fire and moke eal 9450 Intumescent with TPE Fin Fire and moke eal 11/16" 1 9/16" 9550 Gray 9550DKB Brown 9450B 9450C 9450W Brown Charcoal White E 20, 45, 60, 90 minute rated category B wood doors up to: single swing 4 0 x 9 0, perimeter application pairs 8 0 x 9 0, perimeter/meeting edge E Available in 36, 48, 84, 96 and 108 lengths 20, 45, 60, 90 Minute rated category B wood doors perimeter application up to: single swing 4 0 x 9 0 standard pair 8 0 x 9 0 use 9550 at the meeting edge MRA MRA Edge ealing ystems MRA Anti-microbial not available in clear NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com 3

4 Phone: Fax: Perimeter eals All perimeter seals this page. Aluminum Housing: A = Clear B = Gold DKB = Dark bronze Perimeter A626A A626B A626DKB nylon brush 7/16" 110NA 110NB 110NDKB 9/16" 110A 110B 110DKB 120NA 120NB 120NDKB 120A 120B 120DKB B 152DKB 5/8" 152V 152VB 152VDKB 160V 160VA 160VB 160VDKB 5/16" A 160B 160DKB 5/16" 137NA 137NB 137NDKB 5/16" 137A 137B 137DKB 5/16" Astragals Adjustable Perimeter eals 158NA 158NDKB 1 3/8" Adjusting Range 1 Astragals 158A 158DKB 158VA 158VDKB 1/8" 1 103NA 103NB 103NDKB 158PA pile 158PDKB Maximum Height 120 5/8" 3/8" Adjusting Range 1 115NA 115NB 115NDKB 107NA 107NB 107NDKB 107A 107B 107DKB 4

5 Use with a threshold for maximum sealing capability. Nylon brush recommended for carpet applications where no threshold is provided. 19/32" 15/16" Mortise required 220NA 15/16" x 1 5/8" 220NB 220NDKB 220A 220B 220DKB nylon brush 220WHA 220WHB 220WHDKB 2 2 5/16" 1 Max. Drop Hollow Metal Doors Max.Drop 320N V 1/8" Automatic Door Bottoms All products this page: 1" Max. Drop HEAVY DUTY 420NA 420NB 420NDKB Max. Drop 423N Available 11 to 48 in length Tested to 1,000,000 cycles Fits 1 5/8 x 3/4 channel. May be field cut (up to 4 ) in length. A furring strip may be used to lower automatic door bottom when a deeper channel is used. Available in length. Fire ratings apply to metal doors only. Door weeps 7/16" 1 7/16" 1" 1 1 9/16" nylon brush C627A C627B C627DKB Door hoes 97VA 97VB 97VDKB 1" 678A 678B 678DKB 1 200NA 200NB 200NDKB 200A 200B 200DKB 7/16" 101VA 101VB 101VDKB V 312VDKB 35EV 35EVDKB 319EV 319EVDKB NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com 5

6 Phone: Fax: addle Thresholds addle Thresholds Typical Wall Threshold Width 413, 413DKB, 413BR 4 513, 513DKB, 513BR 5 613, 613DKB, 613BR 6 713, 713DKB, 713BR 7 813, 813DKB, 813BR 8 913, 913DKB , 1013DKB 10 Note: Flute pattern varies with width of threshold mill finish aluminum standard DKB - aluminum dark bronze finish BR - Architectural Bronze alloy CDA 385 lip-resistance IA Finish Available for better traction and slip-resistance. uffix IA. 424E.60 lbs./ft. 424EDKB.60 lbs./ft. Typical Wall.109 4" Typical Wall.109 ADA Compliant Bumper Thresholds Threshold Width 425E, 425EDKB 5 426E, 426EDKB 6 427E, 427EDKB 7 428E, 428EDKB 8 429E, 429EDKB 9 430E, 430EDKB 10 Note: Flute pattern varies with width of threshold ADA Compliant Bumper eal Thresholds lbs./ft. 896DKB.64 lbs./ft lbs./ft. 950DKB.50 lbs./ft. Typical Wall.078 Typical Wall.105 VINYL FOOT EAL used instead of caulking to increase the weather resistance of the threshold. pecify on order Bumper eal eals against the door providing weather resistance Vinyl ("V") supplied unless other material is specified Options: Neoprene ("N") ilicone ("") Pile ("P") Pile insert not available All thresholds this page. 6

7 Half addle Thresholds lbs./ft. 324DKB 1.20 lbs./ft lbs./ft. 653DKB.78 lbs./ft. tainless teel addle Thresholds lbs./ft. 325DKB 1.32 lbs./ft. Offset addle Thresholds Thermal Break Thresholds 5 Typical Wall.125 7" when installed with the non-beveled edge FLUH with flooring or where no greater than 1/4 vertical rise occurs. Typical Wall.250 4" Typical Wall.250 Typical Wall lbs./ft. 659DKB.89 lbs./ft. Typical Wall.110 Threshold Width 8424, 8424DKB, 8424BR , 8425DKB, 8425BR , 8426DKB, 8426BR , 8427DKB, 8427BR , 8428DKB, 8428BR , 8429DKB, 8429BR , 8430DKB, 8430BR 10 Note: Flute pattern varies with width of threshold lbs./ft. Typical Wall.120 Available in 4 to 10 width. 1st digit = width (ie: 4 = 413) #304 mill finish standard Available: Polished (U32) Brushed (U32D) Half addle, Offset, Thermal Barrier & tainless teel Thresholds lbs./ft. Typical Wall.120 Available in 4 to 10 width. 1st digit = width (ie: 4 = 412) NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com 7

8 Phone: Fax: Ramps lope = 1:12 All items this page mill finish aluminum standard DKB - aluminum dark bronze finish lip-resistant IA Finish All ramps are available with our slip-resistant surface for better traction. uffix IA Ramp Height Width R50, R50DKB 1/2 6 R75, R75DKB 3/4 9 R100, R100DKB 1 12 R125, R125DKB 1 1/4 15 R150, R150DKB 1 1/2 18 R175, R175DKB 1 3/4 21 R200, R200DKB 2 24 R225, R225DKB 2 1/4 27 R250, R250DKB 2 1/2 30 Return Closed Ends for Ramps RCE-9, RCE-9DKB 9 RCE-15, RCE-15DKB 15 RCE-21, RCE-21DKB 21 RCE-30, RCE-30-DKB 30 Offset 6 Ramp Height Width (w) of ramp from offset (w) Cover Plates RO50, RO50DKB 1/2 6 RO75, RO75DKB 3/4 9 RO100, RO100DKB 1 12 RO125, RO125DKB 1 1/4 15 RO150, RO150DKB 1 1/2 18 RO175, RO175DKB 1 3/4 21 RO200, RO200DKB 2 24 RO225, RO225DKB 2 1/4 27 RO250, RO250DKB 2 1/2 30 Minimum width 2, 48" Maximum width 48, Maximum length Aluminum 818BR Brass - Max width 36, length tainless steel standard with square edges, beveling available, min. width 3 1/8" Minimum width 3, Maximum 48" Maximum width 48, Maximum length Aluminum 814 tainless steel standard with square edges, beveling available, min. width 4, max width 36, length 96 3/8" 838 Aluminum Minimum width 4, 48" Maximum Maximum width 48, Maximum length 144 8