16 Passaic Avenue, Unit 9 Fairfield, NJ Phone: (973) Fax: (973)

Transcription

1 Date: 16 Passaic Avenue, Unit 9 Fairfield, NJ Phone: (973) Fax: (973) Proposal Proposal # To: Re: Attn: Hollister Construction Service 339 Jefferson Road Parsipany, NJ NSA Hazelwood Avenue, Newark, NJ 24 Hazelwood Avenue Newark, NJ Vincent Solano We Propose to Supply & Install as Follows: Section 001: Project Scope This proposal includes all applicable labor and equipment to complete the project as specified in the Architectural Details via the Impact Engineered Drawings submitted upon acceptance. Supply and Install: Kawneer 1600 Series (2" x 4 1/2") Curtain Wall Framing System including all integral blocks, screws, gaskets and components of; as outlined in Window Types A802 and A803, and Window Details A804 in accordance with this proposal Supply and Install: Kawneer GlassVent Windows for Curtain Wall Systems, including all integral blocks, screws, gaskets and components of; as outlined in Window Types A802 and A803, and Window Details A804 in accordance with this proposal Supply and Install: Kawneer 500 Series Wide Stile Doors (#014, 016, 021, 100, 112A, 133A, 133B, 134, 134A, 134B, S002, S103, S105, S108) with applicable Hardware Package as outlined in Lower Level Floor Plan A101, First Floor Plan A102-A, A102-B, and Door Types A801 in accordance with this proposal Supply and Install: 1" Insulated Clear Tempered Glass (1,164 pieces, 13,500 sq. ft.), 1" Insulated Spandrel Tempered Glass (470 pieces, 5,700 sq. ft.), and 1" Frosted Tempered Storefront (10 pieces, 170 sq. ft.), as outlined in Cover A-0.00 in Window Types A802 and A803, Door Types A801, and Window Details A804 in accordance with this proposal Includes: Union Labor, Equipment and all applicable installation materials Excludes: Wood Doors/ Door Handle Sets, Panels/ Clips, Providing and Connection of Door Electrical Components (Door Contacts, Card Reader, Motion Sensor, Electric Strike), Mirror Frames, Demolition Page 1 of 6

2 Section 002: Storefront Framing Kawneer 451 Series Storefront Framing 2" x 4 1/2" Flush Glaze Including Tubes, Clips, Gaskets, Screws and all applicable components of; Finish: Clear Anodized Kawneer 1600 Series Curtain Wall Framing 2" x 7 1/2" Flush Glaze Including Tubes, Clips, Gaskets, Screws and all applicable components of; Finish: Clear Anodized Page 2 of 6

3 Section 003: Aluminum Doors/ Hardware Kawneer 500 Series/ Wide Style Door Set (`s) 3'-0" x 7'-0" with 144" max. Transom Frame 13/4" or 2" x 4 1/2" Door Frame to Match as Specified 5" Head and Side Style/ 6 1/2" Bottom Rail Offset Pivots (1 Pair) MS Lock/ Thumb Turn MS Face Mounted Closer/ Standard Back Check (NHO) Standard Threshold/ Door Sweep Standard Push Bar/ Pull Handle Set Standard Threshold (ADA Compliant) Finish: As Specified Note: See Section 001: Specific door heights, finish quantities, schedule door #'s, and plan locations. See hardware (add) notes below for hardware revisions and or upgrades. Kawneer 500 Series/ Wide Style Door Set (`s) 3'-6" x 7'-0" with 144" max. Transom Frame 13/4" or 2" x 4 1/2" Door Frame to Match as Specified 5" Head and Side Style/ 6 1/2" Bottom Rail Offset Pivots (1 Pair) MS Lock/ Thumb Turn MS Face Mounted Closer/ Standard Back Check (NHO) Standard Threshold/ Door Sweep Standard Push Bar/ Pull Handle Set Standard Threshold (ADA Compliant) Finish: As Specified Note: See Section 001: Specific door heights, finish quantities, schedule door #'s, and plan locations. See hardware (add) notes below for hardware revisions and or upgrades. Kawneer 500 Series/ Wide Style Door Set (`s) 6'-0" x 7'-0" with 144" max. Transom Frame 13/4" or 2" x 4 1/2" Door Frame to Match as Specified 5" Head and Side Style/ 6 1/2" Bottom Rail Offset Pivots (1 Pair) MS Standard Flush Bolts (Inactive Leif) MS Lock/ Thumb Turn MS Face Mounted Closer/ Standard Back Check (NHO) Standard Threshold/ Door Sweep Standard Push Bar/ Pull Handle Set Standard Threshold (ADA Compliant) Finish: As Specified Note: See Section 001: Specific door heights, finish quantities, schedule door #'s, and plan locations. See hardware (add) notes below for hardware revisions and or upgrades. Specialty Hardware Add LCN Mounting Plate, Cush Shoe Support, Blade Stop Add LCN Face Mounted/ H.D. Add Ives Cont. Mort/ Hinge TW8 (Stainless) Page 3 of 6

4 Section 003: Aluminum Doors/ Hardware Add Ives Cont. Morticed Hinges Add Ives Cont. Mort/ Hinge (Stainless) Add Ives Dust Proof Strike Add Adams Rite Deadlatch Add Von Duprin Dummy Push Bar Add Von Duprin-99 Series Electrified Panic Add Von Duprin-99 Series Electrified Delayed Panic (continued) Section 004: Glass Products 1/4" Clear Tempered Glass Includes Applicable Edge Polish, Cut Outs and or Drill Holes as Specified Note: Fully tempered glass is utilized when safety glass is required for strength or required codes. Fully tempered glass is SAFETY Glass and meets all glazing standards including CPSC 16 CFR When fractured, tempered glass breaks into many small pieces. When broken, fully tempered glass does not fully stay in a glazed opening 1" Clear Insulated/ Tempered Glass Units 1/4" Clear Tempered- 1/2" A.S. - 1/4" Clear Tempered Note: Fully tempered glass is utilized when safety glass is required for strength or required codes. Fully tempered glass is SAFETY Glass and meets all glazing standards including CPSC 16 CFR When fractured, tempered glass breaks into many small pieces. When broken, fully tempered glass does not fully stay in a glazed opening 1" Frosted Insulated/ Tempered Glass Units 1/4" Clear Tempered- 1/2" A.S. - 1/4" Clear Tempered 1" Insulated Tempered/ Spandrel Glass (Standard Color) 1/4" Tempered- 1/2" A.S. - 1/4" Tempered Retail Delivery 7:00am (mall restrictions apply) Loose/ Curbside Delivery Page 4 of 6

5 Section 005: Installation Materials Install products as specified in the Architecural Details submitted in concert with the Manufacturers standard installation materials. APPLICATIONS: Conventional glazing applications, Weatherseal applications including perimeter sealing of doors and windows, Sealing around metal building flashings, gutters and gutter outlets, Factory-applied glass where it would serve as the primary seal bedding compound in a finished sash APPLICATIONS: Dymonic is specifically designed for sealing expansion and control joints in pre-cast tilt-up concrete, curtain wall joints and perimeter caulking around windows and doors. It can also be used for radon mitigation and bedding of mullions and frames. Dymonic exhibits tenacious adhesion, which will not diminish over product life. Colors Aluminum Stone, Anodized Aluminum, Beige, Black, Bronze, Buff, Hartford Green, Ivory, Light Bronze, Limestone, Off White, Precast White, Redwood Tan, Sandalwood, Gray Stone and White GS12669 RT & GS RT: Genie rough terrain scissor lifts are tough, construction-oriented four-wheel drive machines with positive traction control/ ideal for increasing productivity in demanding outdoor worksites. Section 006: Aluminum Panels Fabrication Charge Custom Paint Charge Will Call Panel/ Sheet Pick Up Charge Section 007: Engineering Includes (1) (approved as noted) Shop Drawing PDF File, products as represented in this proposal. Shop Drawings typically take (5) working days from the execution of said contract. Lead Times may vary based on project size and complexity. Lead Time: 5-6 Weeks from approved Shop Drawings Terms: Progressive Deposit, Net 30 Days Please note, the caulking referred to in this estimate is integral system caulking only. This proposal excludes all unit to building substrate caulking, both interior and exterior unless specifically indicated in Section 001: in this proposal. Contract Amount: $1,290,000 (one million two hundred ninety thousand and xx / 100 dollars) The above proposal amount does not include applicable state taxes. Add the amount of $45,175 unless a completed form indicated below is provided (click on the description below for a downloadable form). NJ Form ST-8 Certificate of Exempt Capital Improvement Page 5 of 6

6 Sincerely Yours, Authorized Signature Sam Shauger Impact Storefront Designs Signature Page 6 of 6