Smart Solutions for the Design and Renovation of Facades. Building Wrap Film instead of Paint

Transcription

1 Smart Solutions for the Design and Renovation of Facades Building Wrap Film instead of Paint

2 RENOLIT REFACE Gives Facades a Fresh, New Appearance Versatile, Durable and Sustainable. Customise a building by renovating its facade. This simple concept is behind the RENOLIT REFACE range of highperformance films. And property owners benefit in three ways. They save expensive repainting or remodeling, they can look forward to greater long-term value and their property improves in appearance. RENOLIT REFACE gives buildings an attractive appearance and facades look like new again. You can refresh the shell of a building quickly, cost-effectively, cleanly and durably with the innovative, self-adhesive, multi-layer film from RENOLIT. The weathering-resistant film covers metal facades or facade elements like a second skin and lets them radiate. And furthermore: RENOLIT REFACE also scores in terms of sustainability. Property owners can not only dispense with repeated expensive repainting but also no new metal facade panels need to be ordered or disposed of. Simple Renovation With RENOLIT REFACE. Is a quick and easy application, simple cleaning and long life of importance to you? Then RENOLIT REFACE must be your first choice. The high-quality, multi-layer film is applied directly to cleaned facade panels. But if required, the facade elements can also be removed and the film applied while the panels are on the ground. Irrespective of which method you choose, with RENOLIT REFACE you can halve the costs of renovation because old panels need not be disposed of and no new panels are required. And as the basic structure of the building remains unaltered, the building doesn t require conformance with the latest building regulations. And you will also like this: The building can continue to be used as normal and the business can operate as usual during the renovation. You don t have to worry about drying times, odours or the masking of neighbouring surfaces. You will be satisfied with RENOLIT REFACE for a long time because the film is weathering-resistant for at least ten years. This increases the durability of facades and permanently reduces upkeep costs. This not just of benefit to the owner of the property but also to the environment. 2 3

3 The Advantages At a Glance. Versatile A broad range of colours means that the appearance of a building can be completely changed. In addition, the plotter compatibility of RENOLIT REFACE generates endless design opportunities. Sustainable Simple cleaning and excellent weathering resistance result in consistently low maintenance costs. Naturally, RENOLIT REFACE is free of solvents. And again: Because the facade panels can be reused, significantly fewer materials (metals) are used. Economical Renovations with RENOLIT REFACE are about 50 % cheaper than exchanging facade panels. In addition, the film s durability and simple cleaning further reduce overall costs. Functional With a film width of up to 1.5 metres, RENOLIT REFACE is perfectly dimensioned for almost all facade formats. The high performance film is highly fire-resistant and the satinembossed, structured upper surface can also smoothen-out slightly uneven surfaces. And as opposed to paint finishes, films have a consistent thickness. Easy to Apply Thanks to our Air Release Technology, RENOLIT REFACE can be applied bubble-free in one step. As a result of its low weight, the film is easy to apply in situ. Easy to Clean The film s dirt-repellant PVDF surface simplifies cleaning because it hinders the adherence of dirt (Easy to Clean properties). Even graffiti can be easily removed. UV- and weatheringresistant The film s transparent acrylic protection layer and high-quality pigments give RENOLIT REFACE weathering resistance of at least ten years. 4 5

4 AFTER RENOLIT REFACE No Removal of Facade Panels. 1 Clean the substrate (facade panel) and cut RENOLIT REFACE to the necessary dimensions. 2 Peel-off the backing paper and apply directly to the facade surface. The facade panels need not be removed from the wall. BEFORE 3 Thanks to the film s Air Release Technology, the film can be applied bubble-free by simply smoothing down with a feltcovered wiper. Easy to Use. RENOLIT REFACE is light with a uniform thickness. It protects the substrate while its structured upper surface can smooth out slight unevenness. And the special stiffness of the film enables unproblematic on-site application even in windy weather. At the same time, RENOLIT REFACE is flexible enough to be applied around edges and corners. The product s Air Release Technology stops air bubbles forming. And small positioning errors are easily corrected because the film can be repositioned before the adhesive begins to cure. THE RESULT: A durable and high-quality surface finish. 6 7

5 OFFICE BUILDING WOLFSBURG CAR DEALERSHIP CHRISTMANN HOSPITAL WORMS OFFICE BUILDING EINDHOVEN WORKSHOP HOCKENHEIM 8 9

6 PRODUCT INFORMATION Embossing: 083 structured Standard Delivery Wide: 1300 mm Standard Roll Length: 50 m WEATHERING STABILITY EG., COLOUR SILVER Colour Change in E RENOLIT REFACE standard multilayer film standard singlelayer film Almost Unlimited Possibilities. Twelve immediately available satin-matt base colours can be complemented by an endless number of customer-specified colours. RENOLIT REFACE can also be trimmed or cut in any shape or form. Even company logos or other signage can easily be applied to facades years TECHNICAL DATA COLOURS TEST METHOD UNIT RESULT Thickness DIN EN ISO 4593 mm 0,160 Surface Weight DIN EN ISO g/m² 180 Surface Gloss DIN EN ISO Gloss Units 10 satin 9010 Pure White 9006 White Aluminum 9002 Grey White 7035 Light Grey Breaking Tension ISO 527-3/2/200 MPa 25 Elongation Stability ISO 527-3/2/200 % 100 Dimensional Stability FINAT FTM 14 mm 0,2 Fire Resistance DIN EN classified according to EN in class: C d0 s1 flame retardant 7016 Anthracite Grey 5007 Blue 3011 Red 9001 Cream White Adhesion (Initial adhesion after 24 h) FINAT FTM 01 on steel Weather Stabiltiy ISO N / 25 mm N/m Greyscale ISO 105-A level 3 after 8000 hours Aluminium Silver (metallic) 1024 Curry Yellow Signal White 7042 Traffic Grey From 300m 2 individual colour needs can be realized. RENOLIT REFACE is not developed for application on PVC window profiles and therefore also not certified by the RAL Gütegemeinschaft according to RAL GZ

7 12