RLS Recessed Linear Series

Transcription

1 Catalog # : Project : Prepared By : Date : RLS The RLS Recessed light fixture adds a truly unique, seamless and sophisticated look to any project requiring an easy to install, upscale lighting unit. The RLS lighting system is flexible in its design, making it the perfect choice for high-end hotel lobbies, offices, universities, and retail spaces. Features & Specifications Optical System High transmission snap-in impact-resistant diffuse acrylic lens eliminates bright spots from individual LEDs and provides high vertical illumination and visual comfort. Use of closely spaced medium-power, high brightness chips minimizes pixelation and provides uniform lens luminance. Available in 5000K, 4000K, 3500K, and 3000K color temperatures. Minimum CRI of 82. Electrical High-performance driver features over-voltage, under-voltage, short-circuit and over temperature protection. 0-10V dimming (1% - 100%) standard. Standard Universal Voltage ( Vac) Input 50/60 Hz or optional High voltage (347 Vac). L70 Calculated Life: >100k Hours (See Lumen Maintenance on Page 2) Total harmonic distortion: <20% Operating temperature: C to +40 C (-40 F to +104 F) Power factor: >.95 Input power stays constant over life. Factory pre-wired to section ends with quick-wire connectors Optional V 12W integral emergency battery pack is available to meet critical life-safety lighting requirements. The 90-minute batteries provide constant power to the LED system, ensuring code compliance. A test switch/indicator button is installed beneath the snap in lens mounted to the reflector. Controls Optional integral passive infrared occupancy sensor, see page 5 for more details. Optional integral daylight harvesting sensor, see page 5 for more details. Product Overview 2 ft 4 ft 5 ft 6 ft 8 ft 2x2ft Horizontal ARRA Funding Compliant 2x2ft Vertical-In 2x2ft Vertical-Out

2 Features & Specifications (Cont.) Construction Rigid extruded aluminum housing for consistency and strength. End plates are pre-painted white 20-gauge cold rolled steel. Available in 2, 3, 4, 5, 6, and 8 sections for individual or continuous row mounting. Consult Factory for custom length. Transition from ceiling to wall seamlessly with manufactured corners and clean lines. Ultra-thin 3.7 luminaire height and lightweight design effectively target a broad range of plenum/wall spaces and allow for easy installations. Luminaire is proudly made in the U.S. Housing is treated with phosphate rust inhibitor and painted with textured white powder coat paint. Finish coating of housing reflecting surfaces is with high-reflectance glossy white (minimum 92%) polyester powder. Weight: 3lbs/ft Installation Mounting options include both Drywall and T-Grid. Mounting brackets on housing sides support T-Grid installation. Quick connect harness to attach fixtures in continuous rows. Joiner tabs to ensure proper alignment from fixture to fixture. Power access holes on top and end of fixtures. 1/4 holes on support brackets for hanger wires in Grid installations. 5/8 mounting holes on drywall fixtures for alternate mounting option. Warranty LSI LED Fixtures carry a 5-year warranty. 1 Year warranty on optional Battery Back Up. Test regularly inaccordance with local codes. Listings culus dry/damp Locations per UL 1598 and UL 8750; CSA 22.2 No RoHS Compliant. State of California Title 24. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. American Recovery and Reinvestment Act Funding Compliant. Lighting Facts Approved. Mounting Drywall - Flange (F) Performance DELIVERED LUMENS - PER FOOT* SIZE OUTPUT 3000K 3500K 4000K 5000K WATTAGE 06L *LED Chips are frequently updated therefore values may increase. ELECTRICAL DATA - PER FOOT* OUTPUT 120V 208V 240V 277V 347V 06L 0.048A 0.027A 0.024A 0.021A 0.016A 10L 0.073A 0.042A 0.036A 0.031A 0.025A 11L 0.087A 0.050A 0.043A 0.038A 0.030A 13L 0.100A 0.058A 0.050A 0.043A 0.035A *Electrical data at 25C (77F). Actual wattage may differ by +/-10%. RECOMMENDED LUMEN MAINTENANCE 1 Ambient 0 C (32 F) 5 C (41 F) 10 C (50 F) 15 C (59 F) 20 C (68 F) 25 C (77 F) 30 C (86 F) 35 C (95 F) 10L 11L 13L 06L 10L 11L 13L ,078 1,095 1,132 1, ,222 1,242 1,283 1, ,010 1, ,127 1,147 1,184 1, ,280 1,300 1,344 1, Initial 2 25K hr 2 50K hr 2 75K hr 3 100K hr Lumen maintenance values at 25C are calculated per TM-21 based on LM-80 data and in-situ testing. 2 - In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times the IESNA LM total test duration for the device under testing. 3 - In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times the IESNA LM total test duration for the device under testing. Drywall - Flangeless (FL) T-Grid - 9/16 T-Grid - 15/16 Tegular/Lay-in Tegular/Lay-in T-Grid - 9/16 Slot 3.68" 3.68" 3.71" 3.71" 3.68" 0.80" 3"- 4" 1.47" 3"- 4" SIZE DRYWALL ROUGH-IN WIDTH 3-5/ /8 3"- 4" 3"- 4" 3"- 4" GRID MOUNTING CENTER WIDTHS SIZE 9/16 SLOT 9/16 TEGULAR/LAY-IN 15/16 TEGULAR/LAY-IN /16 4-1/ /16 5-1/8 09/06/17

3 Straight Dimensions GRID JOINER FIXTURE (GJ) FIXTURE (F,FL) GRID STARTED / ENDER FIXTURE (GS,GE) Grid Fixtures Individual Grid Unit Starter or Ender Grid Unit Joiner Grid Unit Housing Overall Housing Overall Housing Overall Housing Overall Housing Overall Housing Overall GRID INDIVIDUAL FIXTURE (GI) Drywall Fixtures Housing Flange Fixture Overall Flangeless Fixture Overall Mounting & Lens (End Flange) (End Flange) 2ft Add.80 Start and End of Run Add 1.35 Start and End of Run ft Add.80 Start and End of Run Add 1.35 Start and End of Run ft Add.80 Start and End of Run Add 1.35 Start and End of Run ft Add.80 Start and End of Run Add 1.35 Start and End of Run ft Add.80 Start and End of Run Add 1.35 Start and End of Run ft Add.80 Start and End of Run Add 1.35 Start and End of Run Straight Ordering Guide TYPICAL ORDER EXAMPLE: 3RLS 2 LED 11L GI LF UE 40 WH OCC Luminaire Lumens Prefix Length 1 (Per Foot) Ceiling/Wall Type Lens Line Voltage 3RLS - Wide 4RLS - 4 Wide 2-2FT 3-3FT 4-4FT 5-5FT 6-6FT 8-8FT 06L Lumens 10L - 1,000 Lumens 11L - 1,100 Lumens 13L - 1,300 Lumens GI - Grid Individual Unit: (Provided with 2 endcaps and starter harness) GJ - Grid Joiner Unit: (Provided with no endcaps or starter harness) GS - Grid Starter Unit: (Provided with 1 endcap and starter harness) GE - Grid Ender Unit: (Provided with 1 endcap and no starter harness) LF - Frosted Diffuse UE - Universal Voltage ( V) V Color Temp Finish Options K K K K WHT - White RAL - Custom Color (Specify i.e. RAL829) OCC - Occupancy Sensor DAY - Daylight Sensor DOC - Daylight and Occupancy Sensor EM - Emergency Battery Pack EC - Emergency Circuit F - Fast Blow Fuse GMF - Slow Blow Fuse FI - 3/4 Flange For Drywall / Sheetrock Fixture, Starter Harness and (2) end caps FLI - Flangeless For Drywall / Sheetrock Flangeless for Drywall / Sheetrock Row Mount Options: FS - 3/4 Flange Starter Unit (includes harness and 1 end cap) FJ - 3/4 Flange Joiner Unit (no harness or end caps) FE - 3/4 Flange End Unit (includes 1 end cap, no harness) FLS - Flangeless Starter Unit (harness and 1 end cap) FLJ - Flangeless Joiner Unit (no harness and 1 end cap) FLE - Flangeless End Unit (1 end cap, starter harness) 1 - Consult factory for custom lengths.

4 Dimensions VERTICAL IN FIXTURE (CVI F, CVI FL) VERTICAL OUT FIXTURE (CVO F, CVO FL) HORIZONTAL FIXTURE (CHO F, CHO FL) Grid Fixture Housing Lens Overall w/end Cap Grid Horizontal Fixture Drywall Fixtures Horizontal Vertical Inside Vertical Outside Dim X Mounting Flange End Cap Trim Length Flangeless End Cap Trim Length Add.80 End of Fixture Add 1.35 End of Fixture N/A Add.80 End of Fixture Add 1.35 End of Fixture N/A Add.80 End of Fixture Add 1.35 End of Fixture Ordering Guide TYPICAL ORDER EXAMPLE: 3RLS CVO LED 11L GJ LF UE 40 WH GRID HORIZONTAL FIXTURE (CHO G*) Luminaire Prefix Lumens (Per Foot) Ceiling/Wall Type Lens Line Voltage Color Temp Finish Options 3RLS - Wide 4RLS - 4 Wide CVO - Vertical Out 1 CVI - Vertical In 1 CHO - Horizontal 06L Lumens 10L - 1,000 Lumens 11L - 1,100 Lumens 13L - 1,300 Lumens GI - Grid Individual Unit: (Provided with 2 endcaps and starter harness) GJ- Grid Joiner Unit: (Provided with no endcaps or starter harness) GS- Grid Starter Unit: (Provided with 1 endcap and starter harness) LF - Frosted Diffuse UE - Universal Voltage ( V) V K K K K WHT - White RAL - Custom Color RAL829) (Specify i.e. EC - Emergency Circuit F - Fast Blow Fuse GMF - Slow Blow Fuse GE- Grid Ender Unit: (Provided with 1 endcap and no starter harness) FI - 3/4 Flange For Drywall / Sheetrock Fixture, Starter Harness and (2) end caps FLI - Flangeless For Drywall / Sheetrock Flangeless for Drywall / Sheetrock Row Mount Options: FS - 3/4 Flange Starter Unit (includes harness and 1 end cap) FJ - 3/4 Flange Joiner Unit (no harness or end caps) FE - 3/4 Flange End Unit (includes 1 end cap, no harness) FLS - Flangeless Starter Unit (harness and 1 end cap) FLJ - Flangeless Joiner Unit (no harness and 1 end cap) FLE - Flangeless End Unit (1 end cap, starter harness) 1 - Not Available with GI, GJ, GS, or GE Ceiling/Wall types 09/06/17

5 Controls Daylight Sensor Optional integral daylight sensor uses a sliding setpoint control algorithm, meaning it has separate night and day setpoints that represent the desired photocell signal under that condition. To determine the correct dimming level for any given photocell reading, it calculates the level based on the slope of the line between the two setpoints. The result is accurate dimming that maintains the task illumination. Sensor has a detection cone of approximately 70. Sensor mounts to powder coat painted cold roll steel and replaces last of acrylic lens. 100% Controlled Lights Daylight Sensor Control Algorithm Night Occupancy Sensor Optional integral passive infrared occupancy sensor activates switching of luminaire light levels. Standard Factory settings: Light is activated and increased to full bright upon detection of motion. Light is turned off when target zone is absent of motion activity for ~30 minutes. Sensor has a detection cone of approximately 70, see coverage diagram. Sensor mounts to powder coat painted cold roll steel and replaces last of acrylic lens. 0 Measured Lights Day 100% 0 (0m) Occupancy Sensor Coverage Diagram 2.5' (0.8m) 5' (1.5m) 7.5' (2.3m) 10' (3m) (2.4m) 8' (1.8m) 6' (1.2m) 4' (0.6m) 2' (0m) (0.6m) 0' 2' (1.2m) 4' (1.8m) 6' (2.4m) 8' Daylight Sensor Configurator Nighttime setpoint Auto button for automatic dimming Daytime setpoint Night Auto Day Raise/lower light levels Photometry 3RLS 4 LED 06L XX LF XX 40 WH Luminaire photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM As specified by IESNA LM the entire luminaire is tested as the source resulting in a luminaire efficiency of 100%. See for detailed photometric data. Photosensor Setup Remote ZONAL LUMEN SUMMARY ZONE LUMENS % OF LUMINAIRE % , % , % % % % , % % , %