Un.1 - Vila das Aves Un.2 - Santo Tirso Un.3 - Vilar Formoso
|
|
- Colin Barrett
- 6 years ago
- Views:
Transcription
1
2 Un.1 - Vila das Aves Un.2 - Santo Tirso Un.3 - Vilar Formoso Termolan is a Portuguese company funded in 1975 which manufactures rock wool for thermal and acoustic insulation and for fire protection. The knowledge of entire process that takes place since the transformation of the basalt and limestone in mineral wool, associated to the use of updated technological means, allows Termolan to manufacture a product that answer to the client's needs. Basalt e limestone Melting Recepcion first layer Fiberizing and injection of binders Stone wool layers Curing oven Cured stone wool Cut waste are recycled Longitudinal cut Transversal cut Paking Termolan has been consolidating her position in the market thanks to the high quality levels and competitiveness of the products reached with appropriated administration politics. The success of the projects that Termolan develops is founded in a strong and expert leadership, in the high technological level of the production units and in a board with the appropriate competences that allow qualifying the company for the new emerging challenges: Introduction of new technologies, incorporated in the product, in the process of manufacture or in any functional area of the company; Growth toward new markets. Now, the company guides their efforts in the permanent improvement of their customer s satisfaction and in the improvement of the efficiency of the Organization, through the implementation of an appropriate Quality Management System ISO Actual problematic such as the environment and the enrichments of the society that encircles it are concrete realities for Termolan, that expressed the concern in manufacturing according with applicable regulations and diminishing as possible the environmental impact of its manufacturing units where are located.
3 R These products - natural, inorganic and minerals - are manufactured according pre-defined quality standards and order to the specificity of their use. CONSTRUCTION PRODUCTS - Manufactured according EN CE Marking Directive 89/106/CE applies to construction products, i.e. any products produced with a view to their incorporation in a permanent manner in construction works. The purpose of the Construction Products Directive is to ensure the free movement of all construction products within the Union by harmonising national laws with respect to the essential requirements applicable to these products in terms of health and safety. INDUSTRY PRODUCTS DNV Product Certification DNV is one of the classification entities and world leader assisting maritime sector in managing risks, classification of ships, certification of products, etc. The maritime safety is regulated by SOLAS Convention. ROCTERM industry products have the following certificates: * EC TYPE EXAMINATION CERTIFICATE: Med B Certify the product. * QS CERTIFICATE OF ASSESSMENT EC: Med D Certify the quality system for the product. HEALTH AND ENVIRONMENT The use of these products assures a larger easiness in the renewal of the air of the interior inhabitable spaces. The noise is aggression, it is annoyance and nowadays the noise levels are growing. The use of rock wool allows: Insulate and correct the spaces acoustically. Protect the people of the noise aggression. Improve the buildings comfort. The importance of the thermal isolation in the constructions is more and more well-known. The isolation not only it reduces the energy consumptions of exploration of a construction as it protects several materials of the same prolonging them his/her useful life. The products of rock wool Rocterm have for base fibres of the same nature of the origin rocks. These fibres having been rehearsed experimentally, guaranteeing the bio-solubility of the products. The MW ROCTERM fibres accomplish one of the established exclusion criteria in the Note Q of 97/69/CE Directive. The International Agency for Research on Cancer (IARC) - part of the World Health Organisation - in October 2001 concluded that mineral wool insulation was ". unclassifiable as to its carcinogenicity to humans". They are, obviously, inoffensive for health. Even so, their manipulation and application should be made with appropriate clothing and gloves. For safety reasons, according 97/69/CE Directive, all of the mineral wools are classified as irritant for the skin.
4 VERSATILITY IS: THERMAL INSULATION ACOUSTICAL INSULATION FIRE PROTECTION Using only one product R MAIN PROPERTIES: ACOUSTICAL INSULATION - These products have an excellent acoustics. Because of their structure they combine effectively density and sound absorption. THERMAL INSULATION - The stone wool has excellent thermal insulation characteristics. Its working temperature ranges from:-200 º C to + 0 º C. FIRE BEHAVIOR The stone wool is non-combustible. The inclusion of these products can avoid fire spreading trough the insulation, defending the isolated areas from the fire action. WATER RESISTANCE - ROCTERM stone wool does not promote capillary suction. Their non-hydrophilic properties allow them does not promote retention of water. CHEMICALLY NEUTRAL - This stone-wool has a chemical composition that is similar to that resulting from the original rocks (basalt and limestone). HEALTH - These products are harmless to health. MW ROCTERM is a substance tested experimentally (ITEM), which meets the criteria of exclusion established in Note Q Directive 97/69/EC. However its handling and application must be done with appropriate clothing and gloves. ENVIRONMENTAL PROTECTION - These products are manufactured with all care to protect the environment does not produce aggressive substances or contaminants.
5 R PN 30 PK 30 PA 30 DEFINITION: 3 Semi rigid slabs (30 kg/m ) of uniform thickness made of stone wool fibres bonded with synthetic binder, - PN 30 without facing - PK 30 kraft faced - PA 30 aluminium faced PN 30 PK 30 PA 30 CERTIFICATE OF CONFORMITY N.º 0402-CPD RAPPORT OF CONFORMITY N.º 0402-CPD CERTIFICATE OF CONFORMITY N.º 0402-CPD MW EN T3 - WS APPLICATIONS: Multiples, for several constructive solutions, as thermal acoustical insulation with or without vapour barrier. LENGTH (mm) WIDTH (mm) DIMENSIONS a) a) 600 NP EN822 NP EN Low density Economic product - Very good insulation performance. - Flexibility and cohesion. Tolerances: THICKNESS: Class T3-3% through -3 mm to + 10 % through +10 mm * LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference a) PK and PA not available THERMAL RESISTANCE RD EN12667 EN R (m.k/w) D BUILDINGS THERMAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : W / mk ACOUSTICAL INSULATION FIRE REACTION PN 30 and PA 30 INCOMBUSTIBLE - EUROCLASS A1 PK 30 INDETERMINATE - EUROCLASS F WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements Stability. Applied vertically neither bend nor breaks Fire safety Good water behaviour Inert product respecting the environment (CFC and HCFC free)
6 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw EN ISO/DIS αw mm = 0.85 (MH) Class B αw mm = 0.95 (MH) Class A αw mm = 0.95 (MH) Class A SQUARENESS FLATNESS OTHER PROPERTIES Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.1% TENSILE STRENGTH PARALLEL TO FACES PN kpa PK kpa PA kpa NP EN1608 NP EN1607 PACKAGING RETRACTILE PLASTIC PACKS
7 R PN 40 PK 40 PA 40 DEFINITION: 3 Semi rigid slabs (40 kg/m ) of uniform thickness made of stone wool fibres bonded with synthetic binder, - PN 40 without facing - PK 40 kraft faced - PA 40 aluminium faced PN 40 PK 40 PA 40 CERTIFICATE OF CONFORMITY N.º 0402-CPD RAPPORT OF CONFORMITY N.º 0402-CPD CERTIFICATE OF CONFORMITY N.º 0402-CPD MW EN T3 - WS APPLICATIONS: Multiples, for several constructive solutions, as thermal acoustical insulation with or without vapour barrier. LENGTH (mm) WIDTH (mm) DIMENSIONS 30 a) 600 NP EN822 NP EN Tolerances: THICKNESS: Class T3-3% through -3 mm to + 10 % through +10 mm * LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference a) PK and PA not available The excellence in low density - Very good acoustical insulation. - Good mechanical performance. THERMAL RESISTANCE RD EN12667 EN R (m.k/w) BUILDINGS THERMAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : W / mk D ACOUSTICAL INSULATION FIRE REACTION PN 40 and PA 40 INCOMBUSTIBLE - EUROCLASS A1 PK 40 INDETERMINATE - EUROCLASS F WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements Good thermal insulation Fire safety Good water behaviour Inert product respecting the environment (CFC and HCFC free)
8 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw EN ISO/DIS αw = 0.95 (MH) Class A SQUARENESS FLATNESS OTHER PROPERTIES Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.1% TENSILE STRENGTH PARALLEL TO FACES PN kpa PK kpa PA kpa NP EN1608 NP EN1607 PACKAGING RETRACTILE PLASTIC PACKS
9 R PN 55 CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing. MW EN T4 - WS APPLICATIONS: Multiples as thermal acoustical insulation, for several constructive solutions. NOMINAL DENSITY: 55 kg/m 3 Insulation + LENGTH (mm) WIDTH (mm) DIMENSIONS Tolerances: THICKNESS: Class T4-3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% NP EN822 NP EN823 THERMAL RESISTANCE RD EN12667 EN R (m.k/w) * Is valid the lowest difference - Very good thermal insulation. - Good mechanical performance. BUILDINGS THERMAL INSULATION ACOUSTICAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : D W / mk FIRE PROTECTION FIRE REACTION INCOMBUSTIBLE - EUROCLASSE A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements Good acoustical insulation Fire safety Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
10 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw mm = 0.85(MH) Class B αw and mm = 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.1% TENSILE STRENGTH PARALLEL TO FACES P40 kpa NP EN 1608 PACKAGING RETRACTILE PLASTIC PACKS
11 R PN 70 CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing. MW EN T4 - WS APPLICATIONS: Multiples as thermal acoustical insulation, for all higher demands requirements. DENSIDAD NOMINAL: 70 kg/m 3 Insulation ++ DIMENSIONS NP EN822 NP EN823 - Excellent thermal acoustical insulation. - Very good mechanical performance. LENGTH (mm) WIDTH (mm) BUILDINGS Tolerances: THICKNESS: class T4-3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference THERMAL INSULATION THERMAL RESISTANCE RD EN12667 EN R (m.k/w) THERMAL CONDUCTIVITY - DECLARED VALUE: : D W / mk ACOUSTICAL INSULATION FIRE PROTECTION FIRE REACTION INCOMBUSTIBLE - EUROCLASS A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements High insulation performances Fire safety Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
12 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw = 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% 70ºC / % HR: The relative deviation (length є l and width є w) not exceed 0.1% TENSILE STRENGTH PARALLEL TO FACES 45 kpa NP EN 1608 PACKAGING RETRACTILE PLASTIC PACKS
13 R PN CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing. MW EN T4 - WS APPLICATIONS: Multiples as thermal acoustical insulation in higher demands requirements and fire protection, especially for vertical applications. NOMINAL DENSITY: kg/m 3 Versatility DIMENSIONS NP EN822 NP EN823 - Thermal acoustical insulation and fire protection. - High mechanical performance. LENGTH (mm) WIDTH (mm) BUILDINGS Tolerances: THICKNESS: class T4-3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% *Is valid the lowest difference THERMAL INSULATION THERMAL RESISTANCE RD EN12667 EN R (m.k/w) THERMAL CONDUCTIVITY - DECLARED VALUE: : W / mk D ACOUSTICAL INSULATION FIRE PROTECTION FIRE REACTION INCOMBUSTIBLE - EUROCLASS A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application High insulation performances Fire safety Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
14 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw mm= 0.90 Class A αw and mm= 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% 70ºC / % HR: The relative deviation (length є l and width є w) not exceed 0.1% TENSILE STRENGTH PARALLEL TO FACES 60 kpa NP EN 1608 PACKAGING RETRACTILE PLASTIC PACKS
15 R LF 90 LF 110 LF 90 LF 110 CERTIFICATE OF CONFORMITY N.º 0402-CPD CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing. MW EN T4 - WS APPLICATIONS: Slabs specially designed for floor applications as thermal, acoustical insulation and reduction of impact noise. LENGTH (mm) WIDTH (mm) NOMINAL DENSITY LF 90 LF R (m.k/w) DIMENSIONS LF 90 LF 110 Tolerances: THICKNESS: Class T4-3% through -3 mm to 5% through +5 mm * LENGTH: ± 2% WIDTH: ± 1.5% kg/m kg/m NP EN822 NP EN * Is valid the lowest difference EN12667 THERMAL RESISTANCE R D EN Floor Insulation - Excellent acoustical insulation and impact noise reduction. - Very good mechanical performance. BUILDINGS THERMAL INSULATION ACOUSTICAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : D W / mk FIRE PROTECTION FIRE REACTION INCOMBUSTIBLE - EUROCLASS A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Compatible with heating floors solutions Good thermal insulation Fire safety Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
16 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) LF 90 LF mm F (Hz) LF 90 LF ,2 1 0,8 0,6 0,4 0, LF 90 LF 110 F (Hz) EQUIVALENT ABSORPTION AREA αw EN ISO/DIS LF90 αw = 1,00 Class A LF110 αw = 0.85 (MH) Class B SQUARENESS FLATNESS OTHER PROPERTIES Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY TENSILE STRENGTH PARALLEL TO FACES 23ºC / 90% HR: The relative deviation (length є and width є w not exceed 0.0% 70ºC / % HR: The relative deviation (length є and width є w not exceed 0.1% LF kpa LF kpa NP EN1608 ACOUSTIC INSULATION - IMPACT NOISE TRANSMISSION To prevent the spread of these impact noises and the receipt by air should be done a elastic cut between the soil and the structural elements. 1 - Precast concrete floor plank 2 - LF 90 or LF 110 slabs 3 - Polyethylene vapour barrier 4 - Mesh reinforced screed 5 - Floating concrete 6 - Flooring 7 - Edge insulation and finishing panel The best solution is to make a floating floor on stone wool slabs. It is essential to be avoided the floating floor contact with the structural support elements. PACKAGING RETRACTILE PLASTIC PACKS
17 R GC 70 GC 90 GC 70 CERTIFICATE OF CONFORMITY N.º 0402-CPD GC 90 CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing. MW EN T4 - Ws APPLICATIONS: Slabs specially designed and manufactured in size appropriate to attach plasterboards. Perfect for rehabilitation applications and hair inside buildings as thermal insulation and acoustic correction in solutions needed a low noise level. NOMINAL DENSITY GC 70 GC 90 LENGTH (mm) WIDTH (mm) DIMENSIONS kg/m 90 kg/m or NP EN822 NP EN823 Rehabilitation Suitable for plasterboards - Excellent thermal acoustical insulation. - Very good mechanical performance. BUILDINGS Tolerances: THICKNESS: Class T4-3% through -3 mm to +5% through +5 mm * LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference THERMAL INSULATION THERMAL RESISTANCE R D EN12667 EN R (m.k/w) ACOUSTICAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : W / mk D FIRE PROTECTION FIRE REACTION INCOMBUSTIBLE - EUROCLASS A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements High insulation performances Fire safety Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
18 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) GC 70 GC mm F (Hz) GC 70 GC ,2 1 0,8 0,6 0,4 0, CG 70 CG 90 F (Hz) EQUIVALENT ABSORPTION AREA αw EN ISO/DIS αw = 1,00 Class A SQUARENESS OTHER PROPERTIES Deviation length/width < 5 mm/m NP EN824 FLATNESS Deviation 6 mm NP EN825 DIMENSIONAL STABILITY TENSILE STRENGTH PARALLEL TO FACES 23ºC / 90% HR: The relative deviation (length є and width є c) not exceed 0.0% 70ºC / % HR: The relative deviation (length є and width є c) not exceed 0.1% GC kpa GC kpa NP EN1608 PACKAGING SLABS ON PALLETS WRAPPED IN PLASTIC FILM
19 R 3 MK 230 MN 230 MA 230 MK 230 RAPPORT OF CONFORMITY N.º 0402-CPD MN 230 CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: Flexible rolls (Dens.25/30 Kg/m ) of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing, kraft or aluminium faced. MA 230 CERTIFICATE OF CONFORMITY N.º 0402-CPD MW EN T1 - WS APPLICATIONS: Multiple as thermal acoustical insulation. - MK 230 several applications, especially horizontal. - MN 230 only horizontal. - MA 230 several applications. LENGTH (mm) LARGEUR (mm) DIMENSIONS NP EN822 NP EN823 Multifunctionality of applications - Providing good thermal insulation. Tolerances: THICKNESS: Class T1-5% through -5 mm a + excess permitted LENGTH: ± 2% WIDTH: ± 1.5% 2 R (m.k/w) THERMAL RESISTANCE R EN12667 EN THERMAL CONDUCTIVITY - DECLARED VALUE: : W / mk D D BUILDINGS THERMAL INSULATION ACOUSTICAL INSULATION FIRE REACTION MN 230 and MA 230 INCOMBUSTIBLE - EUROCLASS A1 MK 230 INDETERMINATE - EUROCLASS F WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements Acoustical insulation improvement Fire safety Good water behaviour Inert product respecting the environment (CFC and HCFC free)
20 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,2 1 0,8 0,6 0,4 0, mm F (Hz) EQUIVALENT ABSORPTION AREA αw EN ISO/DIS αw = 0.54 (MH) Classe D WATER VAPOUR PERMEABILITY (only MA 230) DIMENSIONAL STABILITY OTHER PROPERTIES TENSILE STRENGTH PARALLEL TO FACES 3 0,4 g / m. 24h (value depending of the aluminium facing) 23ºC / 90% HR: The relative deviation (length є l and width є c) not exceed 0.0% MK kpa MN kpa MA kpa NP EN824 NP EN1608 PACKAGING RETRACTILE PLASTIC ROLLS
21 R VF CERTIFICATE OF CONFORMITY N.º 0402-CPD DEFINITION: 3 Flexible rolls (Dens.25/30 Kg/m ) of uniform thickness made of stone wool fibres bonded with synthetic binder, faced with a reinforced glass tissue. MW EN T1 - Ws APPLICATIONS: Product specially designed for use in the vertical position as (continuous) thermal and acoustic insulation in facades of industrial buildings. LENGTH (mm) WIDTH (mm) DIMENSIONS Tolerances: THICKNESS: Class T1-5% through -5 mm a + excess permitted LENGTH: ± 2% WIDTH: ± 1.5% NP EN822 NP EN823 Cladding Walls - Continuous insulation. - High insulation performance. THERMAL RESISTANCE R D EN12667 EN R (m.k/w) INDUSTRIAL BUILDINGS THERMAL INSULATION ACOUSTICAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : W/ mk D FIRE PROTECTION FIRE REACTION INCOMBUSTIBLE - EUROCLASS A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application Easy adaptation to structural elements Acoustical insulation improvement Fire safety Good water behaviour Inert product respecting the environment (CFC and HCFC free)
22 ACOUSTICAL ABSORPTION COEFFICIENT αs EN ISO20354 mm F (Hz) mm F (Hz) ,2 1 0,8 0,6 0,4 0, mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw= 0.54 (MH) Class D EN ISO/DIS DIMENSIONAL STABILITY TENSILE STRENGTH PARALLEL TO FACES OTHER PROPERTIES 23ºC / 90% HR: The relative deviation (length є l and width є c) not exceed 0.1% 45 kpa NP EN1608 PLACING DETAILS: - VF mat is fast, practical and effective placing - The mats are vertically open and fixed at the top of the façade. - Each roll supports its own weight. 2 - The other anchorages to be used should be (±1por m ) for the product stability and has subsequently be applied the steel facade. - In most cases a single roll is enough to isolate the entire height of the facade. PACKAGING RETRACTILE PLASTIC ROLLS
23 R COBERLAN N CERTIFICATE OF CONFORMITY N.º 0402-CPD N 75 B B 75 CERTIFICATE OF CONFORMITY N.º 0402-CPD RAPPORT OF CONFORMITY N.º 0402-CPD RAPPORT OF CONFORMITY N.º 0402-CPD DEFINITION: 2 Rigid and high density (±1-175 Kg/m ) slabs of uniform thickness made of stone wool crimped fibres bonded with synthetic binder, without facing or impregnated with bitumen. MW EN T5 - Ws APPLICATIONS: Thermal acoustical insulation solutions, recommended for flat roofs (steel decking and concrete), as waterproofing support. Flat roofs (Deck) NOMINAL DENSITY kg/m 3 - Insulation as waterproofing support. LENGTH (mm) WIDTH (mm) NP EN822 DIMENSIONS NP EN Tolerances: THICKNESS: Class T5-1% through -1 mm a +3 mm * LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference INDUSTRIAL BUILDINGS THERMAL RESISTANCE RD EN12667 EN R (m.k/w) THERMAL INSULATION ACOUSTICAL INSULATION THERMAL CONDUCTIVITY - DECLARED VALUE: : W / mk D FIRE REACTION N and N 75 INCOMBUSTIBLE - EUROCLASS A1 B and B 75 INDERTIMINATE - EUROCLASS F WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Easy and quick application High insulation performances Fire safety Excellent mechanical behaviour - High compressive traction strength resistance - Very good perpendicular traction strength behaviour - High resistance to rupture (excellent support for steel profiles with big gaps) Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
24 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) N B N 75 B 75 mm N B N 75 B F (Hz) ,2 1 0,8 0,6 0,4 0, N B N75 B75 F (Hz) EQUIVALENT ABSORPTION AREA αw EN ISO/DIS αw = 0.75 (MH) Class C SQUARENESS FLATNESS OTHER PROPERTIES Deviation length / width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY TENSILE STRENGTH PARALLEL TO FACES TENSILE STRENGTH PERPENDICULAR TO FACES COMPRESSIVE STRENGTH σ 10 POINT LOAD 23ºC / 90% HR: The relative deviation (larg. є l comp. є c) not exceed 0.0% 70ºC / % HR: The relative deviation (larg. є l comp. є c) not exceed 0.0% N / B -160 kpa N 75 / B kpa N / B 9 kpa N 75 / B kpa N / B kpa N 75 / B kpa N / B 740 N N 75 / B 75 9 N NP EN1608 NP EN1607 NP EN826 EN12430 PACKAGING RETRACTILE PLASTIC PACKS UNDER PALLETS
25 R T 40 VF T 55 VF T 70 VF CERTIFICATE OF CONFORMITY T 40 VF N.º 0402-CPD DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing. T 55 VF T 70 VF CERTIFICATE OF CONFORMITY N.º 0402-CPD CERTIFICATE OF CONFORMITY N.º 0402-CPD APPLICATIONS: Slabs specially designed for thermal insulation and acoustic correction in places with a high noise level. As for excellence a product appropriate for sound absorption solutions. NOMINAL DENSITY: LENGTH (mm) WIDTH (mm) 2 R (m.k/w) 30 a) T 40 VF RESISTANCE THERMIQUE R kg/m 55 kg/m 70 kg/m EN12667 EN D 1.45 T 55 VF Tolerances: THICKNESS: Class T5-3% through -3 mm to +5 % through +5 mm * LENGTH: ± 2% WIDTH: ± 1.5% T 40 VF T 55 VF T 70 VF DIMENSIONS T 70 VF NP EN822 NP EN823 * Is valid the lowest difference b) b) b) b) 2.90 a) Not available b) No standard Sound absorption solutions - Excellent acoustical insulation. - Correction, absorption and noise reduction. INDUSTRIAL ACOUSTICS THERMAL INSULATION ACOUSTICAL INSULATION FIRE PROTECTION THERMAL CONDUCTIVITY - DECLARED VALUE: THERMAL RESISTANCE INCOMBUSTIBLE - EUROCLASS A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 T 40 VF : W / mk D T 55 VF : W / mk D T 70 VF : W / mk D EN131-1 EN ISO1182 NP EN1609 BS 2972 Benefits: Multiple applications Easy and quick application Very good thermal insulation Fire safety Very good mechanical performance Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
26 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) T 40VF T 55VF T 70VF mm T 40VF F (Hz) T 55VF T 70VF ,2 1 0,8 0,6 0,4 0, T 40 VF T 55 VF T 70 VF F (Hz) EQUIVALENT ABSORPTION AREA αw T 40 VF = 0.95 Class A T 55 VF = 0.90 Class A T 70 VF = 1.00 Class A OTHER PROPERTIES SQUARENESS Deviation length/width < 5 mm NP EN824 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% TENSILE STRENGTH PARALLEL TO FACES T 40 VF - 35 kpa T 55 VF - 40 kpa T 70 VF - 45 kpa NP EN 1608 PACKAGING RETRACTILE PLASTIC PACKS
27 R AC 40/60 CERTIFICADO DE CONFORMIDADE N.º 0402-CPD DEFINITION: 3 Flexible rolls (Dens.25/30 Kg/m ) of uniform thickness made of stone wool fibres bonded with synthetic binder, faced with a reinforced glass tissue. MW EN T3 - Ws APPLICATIONS: Mat specially suitable for external duct wrap insulation. LENGTH (mm) WIDTH (mm) NP EN822 DIMENSIONS NP EN Duct wrap insulation - External insulation. - High income. Tolerances: THICKNESS: Class T3 de -3% through -3 mm a +10% through +10 mm * LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference HVAC THERMAL CONDUCTIVITY TEMPERATURA MÉDIA (W / m.ºc) (ºc) = W/mK D ISO ISO THERMAL INSULATION ACOUSTICAL INSULATION THERMAL RESISTANCE R ESPESSURA (mm) R (m.k/w) FIRE REACTION INCOMBUSTIBLE - EUROCLASSE A1 WATER ABSORPTION Ws 1.00 kg/m 2 WATER VAPOUR DIFFUSION FACTOR µ : 1,3 D EN12667 EN EN131-1 EN ISO1182 NP EN1609 BS FIRE PROTECTION Benefits: Easy and quick application Effective vapour barrier High insulation performances Fire safety Economic solution Good water behaviour Inert product respecting the environment (CFC and HCFC free)
28 ACOUSTICAL ABSORPTION COEFFICIENT αs EN ISO20354 mm F (Hz) mm F (Hz) ,2 1 0,8 0,6 0,4 0, Manta AC 40/60 F (Hz) EQUIVALENT ABSORPTION AREA αw αw= 0.54 (MH) Class D EN ISO/DIS WATER VAPOUR PERMEABILITY DIMENSIONAL STABILITY OTHER PROPERTIES 3 0,4 g / m. 24h (Value depending of the aluminium facing) 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed pas 0.0% DIN TENSILE STRENGTH PARALLEL TO FACES 200 kpa NP EN1608 WATER VAPOUR TRANSMISSION Aluminium support conditioning Water vapour transmission rate 2 (µg/s.m ) Water vapour permeancy 2 (ng/pa.m ) Air layer thickness equivalent (m) In normal state After initial perforation PLACING DETAILS: - The mat is placed on the ducts in 1200 mm stretches and lengths (duct perimeter + overlap) proportional to duct type. - External fixing is done with metal or synthetic strips. - All joints (overlaps and stretches) must be securely taped or sealed with an aluminium adhesive band to prevent vapour leaks. PACKAGING RETRACTILE PLASTIC ROLLS
29 R Slab CHAMINÉ Fireplaces DEFINITION: Semi rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, faced with a 38 μm thick aluminium cap. - Thermal insulation. - Energy saving. APPLICATIONS: Multiples as thermal insulation of fireplaces, furnaces, heat stove and other equipments. THERMAL INSULATION LENGTH (mm) WIDTH (mm) DIMENSIONS NP EN822 NP EN Placing details: - Slabs placed in the chimney with the aluminium face to the fireplace, to increase the installation thermal efficiency. Tolerances: THICKNESS: -2 % through -2 mm to 2% through +2 mm * LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference MAXIMAL TEMPERATURE: 600 ºC ISO 528 SPECIFIC HEAT: 0,84 KJ/Kg ºC WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR FIRE REACTION INCOMBUSTIBLE OTHER PROPERTIES Ws 1.00 kg/m 2 EN131-1 EN ISO1182 0,4 g / m 3. 24h (Value depending of the aluminium facing) PACKAGING CARDBOARD BOX µ : 1,3 NP EN12087 DIN BS 2972 Benefits: Easy and quick application High insulation performances Fire safety Good mechanical performance Easy adaptation to structural elements Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
30 G1 R DEFINITION: Loose fill flakes made of stone wool fibres lightly bonded. APPLICATIONS: Multiples as thermal acoustical insulation, mainly for packing in cavities with irregular dimensions, ovens, furnaces, exhaust systems, cryogenic application, etc... NOMINAL DENSITY: Determined and dependent on the application TEMPERATURE SERVICE: ºC a 7 ºC MELT POINT : 11 ºC SPECIFIC HEAT: 0,84 KJ/Kg ºC FIRE REACTION INCOMBUSTIBLE ISO 528 EN131-1 EN ISO1182 For packing in cavities with irregular dimensions - Thermal acoustical insulation. - Multiple applications. BIOLOGICAL BEHAVIOUR Inorganic, it is unaffected by vermin and does not encourage the growth of fungi, parasites or other microorganisms. THERMAL INSULATION CHEMICAL BEHAVIOUR Stone wool fibres are the same kind of rocks that are (basalt and limestone). These fibres are chemically neutral, with ph 7, not reacting with the chemical agents. ACOUSTICAL INSULATION FIRE PROTECTION Mean Temperature ºC ºC 1 ºC 200 ºC 2 ºC 300 ºC 3 ºC 400 ºC ( W/m.ºC ) 0,039 0,045 0,056 0,066 0,079 0,095 0,112 0,128 (Kcal.h./m.ºC) 0,034 0,039 0,048 0,057 0,068 0,082 0,096 0,110 Note: : For cryogenic application the value is determined case by case. ISO8301 WATER ABSORPTION INDETERMINADO WATER VAPOUR DIFFUSION FACTOR µ : 1,3 NP EN12087 BS 2972 Benefits: Easy and quick application High insulation performances Fire safety Chemically neutral and no corrosive Inert product respecting the environment (CFC and HCFC free) PACKAGING PLASTIC BAG
31 R R 70 R R 125 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Flexible rolls of uniform thickness made of stone wool fibres bonded with synthetic binder, fixed in a wired galvanized mesh. APPLICATIONS: Multiples as thermal acoustical insulation of large pipes, flanges, vessels and boilers. They are also ideal for large curved surfaces. NOMINAL DENSITY: R 70 R R kg/m kg/m 125 kg/m TEMPERATURE: R70 R R125 SERVICE: 600 ºC 700 ºC 7 ºC MAXIMAL: 700 ºC 7 ºC 0 ºC SPECIFIC HEAT: 0.84 KJ/Kg ºC Large curved surfaces - Thermal acoustical insulation and fire protection. - Maritime and other industrial applications. INDUSTRY LENGTH (mm) WIDTH (mm) Tolerances: DIMENSIONS NP EN822 NP EN R R - R THICKNESS: -5 % through -5 mm to +10% through +10 mm* LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference THERMAL INSULATION ACOUSTICAL INSULATION FIRE PROTECTION R 70 R R 125 EN12667 THERMAL CONDUCTIVITY EN12939 MEAN TEMPERATURE (ºC) (W / m.ºc) (Kcal.h / m.ºc) MEAN TEMPERATURE (ºC) (W / m.ºc) (Kcal.h / m.ºc) MEAN TEMPERATURE (ºC) (W / m.ºc) (Kcal.h / m.ºc) FIRE REACTION INCOMBUSTIBLE EN131-1 EN ISO Benefits: Easy and quick application High insulation performances Fire safety High mechanical performance Easy adaptation to structural elements Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
32 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) R R R ,2 1 0,8 0,6 0,4 0, R 70 R R125 F (Hz) These products are suitable for acoustic insulation of pipes. Especially in networks of gases, fluids or where the solid particles moving at high speed. DIMENSIONAL STABILITY OTHER PROPERTIES 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% 70ºC / % HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION Ws 1.00 kg/m 2 NP EN12087 WATER VAPOUR DIFFUSION FACTOR CORROSION µ : 1,3 No corrosive. In acceptable zone of Karnes curve BS 2972 ASTM C-795 C-871 PACKAGING RETRACTILE PLASTIC ROLLS
33 R PI 40 PI A 40 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Semi rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi 40, or aluminium faced Pi A 40. APPLICATIONS: Multiples as thermal acoustical insulation in industrial applications, ducts, tanks and large vessels. Industrial Insulation soft - Thermal acoustical insulation. - Maritime and other industrial applications. NOMINAL DENSITY: 40 kg/m 3 SERVICE TEMPERATURE: 4 ºC MAXIMAL: 0 ºC SPECIFIC HEAT: 0.84 KJ/Kg ºC INDUSTRY THERMAL INSULATION LENGTH (mm) WIDTH (mm) Tolerances: DIMENSIONS THICKNESS: -3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% NP EN822 NP EN * Is valid the lowest difference ACOUSTICAL INSULATION FIRE PROTECTION MINIMUM BENDING RADIUS MEAN TEMPERATURE (ºC) RAYON (mm) (W / m.ºc) (Kcal.h / m.ºc) THERMAL CONDUCTIVITY EN12667 EN FIRE REACTION INCOMBUSTIBLE EN131-1 EN ISO1182 Benefits: Easy and quick application High insulation performances Fire safety Good mechanical performance Easy adaptation to structural elements Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
34 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw= 0.95 Class A EN ISO/DIS SQUARENESS FLATNESS OTHER PROPERTIES Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR Ws 1.00 kg/m 2 3 0,4 g / m. 24h (Value depending of the aluminium facing) µ : 1,3 NP EN12087 DIN BS 2972 PACKAGING RETRACTILE PLASTIC PACKS
35 R PI 55 PI A 55 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Semi-rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi 55, or aluminium faced Pi A 55. APPLICATIONS: Multiples as thermal acoustical insulation in industrial applications, ducts, tanks and large vessels. Industrial Insulation - Thermal acoustical insulation. - Maritime and other industrial applications. NOMINAL DENSITY: 55 kg/m 3 SERVICE TEMPERATURE: 0 ºC MAXIMAL: 600 ºC SPECIFIC HEAT: 0.84 KJ/Kg ºC INDUSTRY THERMAL INSULATION LENGTH (mm) WIDTH (mm) Tolerances: DIMENSIONS THICKNESS: -3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% NP EN822 NP EN * Is valid the lowest difference ACOUSTICAL INSULATION FIRE PROTECTION MINIMUM BENDING RADIUS MEAN TEMPERATURE (ºc) RADIUS (mm) (W / m.ºc) (Kcal.h / m.ºc) THERMAL CONDUCTIVITY EN12667 EN FIRE REACTION INCOMBUSTIBLE EN131-1 EN ISO Benefits: Easy and quick application High insulation performances Fire safety Good mechanical performance Easy adaptation to structural elements Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
36 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw mm = 0.85(MH) Class B αw and mm = 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR Ws 1.00 kg/m 2 0,4 g / m 3. 24h (Value depending of the aluminium facing) µ : 1,3 NP EN12087 DIN BS 2972 PACKAGING RETRACTILE PLASTIC PACKS
37 R PI 70 PI A 70 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi 70, or aluminium faced Pi A 70. APPLICATIONS: Multiple as thermal acoustical insulation in industrial applications. Suitable at both high and low service temperature, in boilers, ducting, ovens, vessels, and other industrial equipment. Industrial Insulation Plus - Thermal acoustical insulation. - Maritime and other industrial applications. NOMINAL DENSITY: 70 kg/m 3 LENGTH (mm) WIDTH (mm) Tolerances: SERVICE TEMPERATURE: 600 ºC MAXIMAL: 700 ºC SPECIFIC HEAT FACTOR: 0.84 KJ/Kg ºC DIMENSIONS THICKNESS: -3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% NP EN822 NP EN * Is valid the lowest difference INDUSTRY THERMAL INSULATION ACOUSTICAL INSULATION FIRE PROTECTION MINIMUM BENDING RADIUS RADIUS (mm) Benefits: MEAN TEMPERATURE (W / m.ºc) (Kcal.h / m.ºc) THERMAL CONDUCTIVITY (ºC) FIRE REACTION INCOMBUSTIBLE EN12667 EN EN131-1 EN ISO Easy and quick application High insulation performances Fire safety Good mechanical performance Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
38 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw= 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Déviation longueur/largeur < 5 mm/m Flèche 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR Ws 1.00 kg/m 2 0,4 g / m 3. 24h (Value depending of the aluminium facing) µ : 1,3 NP EN12087 DIN BS 2972 PACKAGING RETRACTILE PLASTIC PACKS
39 R PI PI A TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi, or aluminium faced Pi A (under prior consultation). APPLICATIONS: Multiple as thermal acoustical insulation in industrial applications. Suitable at both high and low service temperature, in boilers, ducting, ovens, vessels, and other industrial equipment. Versatility - Thermal acoustical insulation and fire protection. - Maritime and other industrial applications. NOMINAL DENSITY: kg/m 3 SERVICE TEMPERATURE: 700 ºC MAXIMAL: 7 ºC INDUSTRY SPECIFIC HEAT FACTOR: 0.84 KJ/Kg ºC LENGTH (mm) WIDTH (mm) Tolerances: DIMENSIONS THICKNESS: -3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% NP EN822 NP EN * Is valid the lowest difference THERMAL INSULATION ACOUSTICAL INSULATION FIRE PROTECTION MINIMUM BENDING RADIUS MEAN TEMPERATURE RADIUS (mm) (W / m.ºc) (Kcal.h / m.ºc) 400 THERMAL CONDUCTIVITY (ºC) FIRE REACTION INCOMBUSTIBLE EN12667 EN EN131-1 EN ISO Benefits: Easy and quick application High insulation performances Fire safety Very good mechanical performance Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
40 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw mm = 0.90 Class A αw and mm = 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR Ws 1.00 kg/m 2 0,4 g / m 3. 24h (Value depending of the aluminium facing) µ : 1,3 NP EN12087 DIN BS 2972 PACKAGING RETRACTILE PLASTIC PACKS
41 R PI 120 PI A 120 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Rigid slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi 120, or aluminium faced Pi A 120 (under prior consultation). APPLICATIONS: Multiple as thermal acoustical insulation in industrial applications. Ideal product for the insulation of hot flat surfaces and for fire protection for structural steel work, also in ship decks and bulkheads. Fire & insulation - Thermal acoustical insulation. - Fire protection solutions. NOMINAL DENSITY: 120 kg/m 3 SERVICE TEMPERATURE: 7 ºC MAXIMAL: 0 ºC SPECIFIC HEAT FACTOR: 0.84 KJ/Kg ºC INDUSTRY THERMAL INSULATION LENGTH (mm) WIDTH (mm) DIMENSIONS NP EN822 NP EN ACOUSTICAL INSULATION FIRE PROTECTION Tolerances: THICKNESS: -3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference MINIMUM BENDING RADIUS RADIUS (mm) Benefits: MEAN TEMPERATURE (W / m.ºc) (Kcal.h / m.ºc) THERMAL CONDUCTIVITY (ºC) FIRE REACTION INCOMBUSTIBLE EN12667 EN EN131-1 EN ISO Easy and quick application High insulation performances Fire safety High mechanical performance Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
42 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw mm = 0.85(MH) Class B αw mm = 0.90 Class A αw mm = 1.00 Class A OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR Ws 1.00 kg/m 2 0,4 g / m 3. 24h (Value depending of the aluminium facing) µ : 1,3 NP EN12087 DIN BS 2972 PACKAGING RETRACTILE PLASTIC PACKS
43 R PI 145 PI A 145 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Rigid and high compression slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi 145, or aluminium faced Pi A 145 (under prior consultation). APPLICATIONS: Thermal acoustical insulation in industrial applications. Particularly suitable for applications where high compression strength is required or where the insulation may be subjected to mechanical loads or vibrations. Outer tank roof insulation and traffic areas - Insulation subjected to mechanical loads. - Insulation subjected to vibrations. NOMINAL DENSITY: 145 kg/m 3 INDUSTRY SERVICE TEMPERATURE: 7 ºC MAXIMAL: 0 ºC THERMAL INSULATION SPECIFIC HEAT FACTOR: 0.84 KJ/Kg ºC ACOUSTICAL INSULATION LENGHT (mm) WIDTH (mm) DIMENSIONS NP EN822 NP EN FIRE PROTECTION Tolerances: MEAN TEMPERATURE (W / m.ºc) (Kcal.h / m.ºc) THICKNESS: -3% through -3 mm to +5% through +5mm* LONGUEUR: ± 2% LARGEUR: ± 1.5% THERMAL CONDUCTIVITY (ºC) EN12667 EN FIRE REACTION INCOMBUSTIBLE *Is valid the lowest difference EN131-1 EN ISO Benefits: Easy and quick application High insulation performances Fire safety High mechanical performance Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
44 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) mm F (Hz) ,4 1,2 1 0,8 0,6 0,4 0, mm mm mm F (Hz) EQUIVALENT ABSORPTION AREA αw αw mm = 0.75(MH) Class C αw mm = 0.85(MH) Class B αw mm = 1.00 Class A SQUARENESS FLATNESS OTHER PROPERTIES Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR Ws 1.00 kg/m 2 0,4 g / m 3. 24h (Value depending of the aluminium facing) µ : 1,3 NP EN12087 DIN BS 2972 PACKAGING RETRACTILE PLASTIC PACKS
45 R PI 1 PI A 1 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Rigid and high compression slabs of uniform thickness made of stone wool fibres bonded with synthetic binder, without facing Pi 1, or aluminium faced Pi A 1 (under prior consultation). APPLICATIONS: Thermal acoustical insulation in industrial applications. Particularly suitable for applications where high compression strength is required or where the insulation may be subjected to mechanical loads or vibrations. Outer tank roof insulation and traffic areas - Insulation subjected to mechanical loads. - Insulation subjected to vibrations. NOMINAL DENSITY: 1 kg/m 3 INDUSTRY SERVICE TEMPERATURE: 7 ºC MAXIMAL: 0 ºC THERMAL INSULATION SPECIFIC HEAT FACTOR: 0.84 KJ/Kg ºC ACOUSTICAL INSULATION LENGTH (mm) WIDTH (mm) DIMENSIONS NP EN822 NP EN FIRE PROTECTION Tolerances: THICKNESS: -3% through -3 mm to +5% through +5mm* LENGTH: ± 2% WIDTH: ± 1.5% * Is valid the lowest difference Benefits: MEAN TEMPERATURE (W / m.ºc) (Kcal.h / m.ºc) THERMAL CONDUCTIVITY (ºC) EN12667 EN FIRE REACTION INCOMBUSTIBLE EN131-1 EN ISO Easy and quick application High insulation performances Fire safety Excellent high mechanical performance Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
46 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) ,2 1 0,8 0,6 0,4 0, F (Hz) mm EQUIVALENT ABSORPTION AREA αw αw mm = 0.75(MH) Class C OTHER PROPERTIES SQUARENESS FLATNESS Deviation length/width < 5 mm/m Deviation 6 mm NP EN824 NP EN825 DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR PERMEABILITY WATER VAPOUR DIFFUSION FACTOR COMPRESSIVE STRENGTH σ 10 POINT LOAD Ws 1.00 kg/m 2 0,4 g / m 3. 24h (Value depending of the aluminium facing) µ : 1,3 75 kpa 9 N NP EN12087 DIN BS 2972 NP EN826 EN12430 PACKAGING RETRACTILE PLASTIC PACKS
47 R CQ 70 - CQ A 70 CQ - CQ A CQ CQ A 120 TYPE APROVED PRODUCT - CERTIFIC. MED-B - CERTIFIC. MED-D DEFINITION: Pipe sections of uniform thickness cut from blocks made of stone wool fibres bonded with synthetic binder, - CQ 70 CQ CQ 120 without facing - CQ A 70 CQ A CQ A 120 aluminium faced. APPLICATIONS: Multiples as thermal (both hot and cold) and acoustical insulation of pipes, for steam, fluid transport pipe work, central heating and air conditioning systems. They are also ideal for acoustical insulation of water evacuation pipes. Pipe work insulation - Thermal acoustical insulation. - Maritime and other industrial applications. NOMINAL DENSITY: CQ 70 CQ CQ kg/m kg/m 120 kg/m INDUSTRY TEMPERATURE: SERVICE: MAXIMAL: CQ 70 CQ CQ ºC 600 ºC 700 ºC 600 ºC 700 ºC 7 ºC THERMAL INSULATION SPECIFIC HEAT: 0.84 KJ/Kg ºC ACOUSTICAL INSULATION DIMENSIONS NP EN822 NP EN823 DIAMETER (mm) (in) ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 3 ½ * * * * * LENGTH (mm) Tolerances: THICKNESS and DIAMETER: -1 mm a + 2 mm LENGTH: ± 2% * Not available FIRE PROTECTION Benefits: Easy and quick application High insulation performances Fire safety High mechanical performance Chemically neutral and no corrosive Excellent water behaviour Inert product respecting the environment (CFC and HCFC free)
48 CQ70 CQ CQ120 THERMAL CONDUCTIVITY MEAN TEMPERATURE (ºc) (W / m.ºc) (Kcal.h / m.ºc) MEAN TEMPERATURE (ºc) (W / m.ºc) (Kcal.h / m.ºc) MEAN TEMPERATURE (ºc) (W / m.ºc) (Kcal.h / m.ºc) EN12667 EN FIRE REACTION INCOMBUSTIBLE EN131-1 EN ISO1182 ACOUSTICAL ABSORPTION COEFFICIENT EN ISO20354 mm F (Hz) CQ CQ CQ ,2 1 0,8 0,6 0,4 0, CQ 70 CQ CQ 120 F (Hz) OTHER PROPERTIES DIMENSIONAL STABILITY 23ºC / 90% HR: The relative deviation (length є l and width є w) not exceed 0.0% WATER ABSORPTION WATER VAPOUR DIFFUSION FACTOR WATER VAPOUR PERMEABILITY Ws 1.00 kg/m 2 µ : 1,3 3 0,4 g / m. 24h (Value depending of the aluminium facing) NP EN12087 BS 2972 ASTM C-795 C-871 PACKAGING CARDBOARD BOX OR PLASTIC BAG
49 R PASSIVE FIRE PROTECTION The stone wool is incombustible; whatever is the standard or test method. Its low calorific power (not suffer significant loss of weight) and the high fusion temperature (more than 0 C), has enable this product a preference to be integrated into PASSIVE PROTECTION solutions that will ensure a FIRE RESIS- TANCE (time / minutes). Each fire resistant solution must be tested to ensure their own performance. The inclusion of these products can avoid fire spreading trough the insulation, defending the isolated areas from the fire action.
FIBRANgeo R-050. Stonewool Insulation Roll. Product Description. Advantages TECHNICAL DATA SHEET
FIBRANgeo R-050 Stonewool Insulation Roll Product Description FIBRANgeo R-050 Stonewool Insulation Roll is industrially produced from molten rock spun into fibres. It is classified as mineral wool product
More informationFIBRANgeo BP 30. Rigid Stonewool insulation board with knit fibres. Product Description. Advantages TECHNICAL DATA SHEET
FIBRANgeo BP 30 Rigid Stonewool insulation board with knit fibres Product Description FIBRANgeo ΒP 30 Rigid Stonewool insulation board with knit fibres is rigid, pressure and delamination resistant, industrially
More informationFIBRANgeo BP-ETICS. Rigid Stonewool insulation board with knit fibres. roduct Description. Advantages TECHNICAL DATA SHEET
FIBRANgeo BP-ETICS Rigid Stonewool insulation board with knit fibres roduct Description FIBRANgeo ΒP-ETICS Rigid Stonewool insulation board with knit fibres is rigid, pressure and delamination resistant,
More informationFIBRANgeo BP 50. Rigid Stonewool insulation board with knit fibres. Product Description. Advantages TECHNICAL DATA SHEET
FIBRANgeo BP 50 Rigid Stonewool insulation board with knit fibres Product Description FIBRANgeo ΒP 50 Rigid Stonewool insulation board with knit fibres is rigid, pressure and delamination resistant, industrially
More informationDuctslab and Ductwrap
CONSTRUCTION TYPE: DUCTS AND TANKS Ductslab and Ductwrap For the thermal insulation of ductwork and water storage tanks ROCKWOOL provide thermal insulation for air conditioning, warm air and extract ducts
More informationDUCTWRAP AND DUCTSLAB For the thermal insulation of ductwork and water storage tanks.
DUCTWRAP AND DUCTSLAB For the thermal insulation of ductwork and water storage tanks. DUCTWRAP AND DUCTSLAB ROCKWOOL Ductwrap and Ductslab provide thermal insulation for air conditioning, warm air and
More informationDUCTWRAP AND DUCTSLAB For the thermal insulation of ductwork and water storage tanks.
DUCTWRAP AND DUCTSLAB For the thermal insulation of ductwork and water storage tanks. DUCTWRAP AND DUCTSLAB ROCKWOOL Ductwrap and Ductslab provide thermal insulation for air conditioning, warm air and
More informationBONDED FIBRE GLASS WOOL CONFIRMS TO IS 8183
BONDED FIBRE GLASS WOOL CONFIRMS TO IS 8183 Made from bonded glass fibres. For thermal and acoustic insulation, available with or without AI.foil. Idea for under deck Insulation, over the false ceiling
More informationEDITION: EXPORT - PUBLISHED: 11/2012 NEW PRODUCT NAMES. ProRox. Product catalogue. Industrial insulation
EDITION: EXPORT - PUBLISHED: 11/2012 PRODUCT S ProRox Industrial insulation Product catalogue Excellence in technical insulation solutions ROCKWOOL Technical Insulation an independent entity within the
More informationROCKWOOL INSULATION & PROTECTION MATERIALS ROCKWOOL BLANKETS FACINGS TYPES APPLICATIONS
BLANKETS UNIPRO Rockwool Blanket conforming to ASTM C-553 and ASTM C-665 is a lightly bonded insulating material available with or without facing. These products can be faced on one side or both sides
More informationProRox Board Products Catalogue NEW. High Temperature Board (Slab), Flex and Wrap (Mat) products for Industrial Applications PRODUCT NAMES
HIGH TEMPERATURE INDUSTRIAL/MECHANICAL INSULATION PRODUCT NAMES ProRox Board Products Catalogue High Temperature Board (Slab), Flex and Wrap (Mat) products for Industrial Applications New product names,
More informationExterior Wall Solutions Building Shell
A strong, water tight and thermally insulated building shell will ensure the buildings sustainability of usage over time. The Exterior Shell is the most important factor of protection to ensure that the
More informationNEXUS CORE. Fire safe lamella boards for bonded composite structures
NEXUS CORE Fire safe lamella boards for bonded composite structures FIRE SAFE STONEWOOL CORE FOR COMPOSITE STRUCTURES SUCH AS ARCHITECTURAL PANELS AND DOORS Unique patented manufacturing process creates
More informationDuctslab and Ductwrap
Ductslab and Ductwrap For the thermal insulation of ductwork and water storage tanks ROCKWOOL provide thermal insulation for air conditioning, warm air and extract ducts used in the internal and external
More informationEDITION: EXPORT - PUBLISHED: 11/2013 NEW PRODUCT NAMES. ProRox. Product catalogue. Industrial insulation
EDITION: EXPORT - PUBLISHED: 11/2013 PRODUCT S ProRox Industrial insulation Product catalogue We share our knowledge to your advantage ROCKWOOL Technical Insulation a subsidiary of the ROCKWOOL Group develops
More informationRW SEMI-RIGID AND RIGID SLABS (RWA45, RW3, RW4, RW5 & RW6)
RW SEMI-RIGID AND RIGID SLABS (RWA45, RW3, RW4, RW5 & RW6) RW SEMI-RIGID AND RIGID SLABS Versatile building slabs for a wide range of general building applications, ROCKWOOL RW semi-rigid and rigid slabs
More informationRoxul RHT. Board Roxul RHT. Flex Roxul RHT. Wrap. High Temperature Insulation for Industrial/Mechanical Applications
HigH TemperaTure industrial/mechanical insulation Roxul RHT Board Roxul RHT Flex Roxul RHT Wrap High Temperature Insulation for Industrial/Mechanical Applications roxul rht Protecting High Temperature
More informationTECHWRAP2 AND TECHTUBE Acoustic solutions for pipework and equipment
TECHWRAP2 AND TECHTUBE Acoustic solutions for pipework and equipment TECHWRAP2 AND TECHTUBE Techwrap 2 and Techtube are high performance acoustic solutions for pipes and equipment. ROCKWOOL Techwrap2 and
More informationSolutions for Marine Insulation
Solutions for Marine Insulation Technical Insulation Marine ins./product usage 3-6.0 May 2008 Replaces: April 2005 Content PAROC Marine insulations meet all requirements...3 Fire insulation...4 Thermal
More informationPhenolic Foam (PF) Insulation
Class O CFC & HCFC Free Phenolic Foam (PF) Insulation The Superior Insulation Foam The Quality Insulation Products for Many Diverse Application Chilled Water Pipe and Duct Insulation Slab Insulation Roof
More informationEDITION RTI - UK & I - PUBLISHED 10/2013 NEW PRODUCT NAMES. PROROX Industrial insulation. Product catalogue UK & Ireland
EDITION RTI - UK & I - PUBLISHED 10/2013 PROROX Industrial insulation PRODUCT S Product catalogue UK & Ireland 1 We share our knowledge to your advantage ROCKWOOL Technical Insulation a subsidiary of the
More informationSPECIFICATIONS:
GREEN PLANET SUSPENDED CEILING INSULATION SYSTEM SPECIFICATIONS: 18.7.2014 This insulation system is comprised of two separate items: 1) Green Planet Encapsulated Insulation Pads. 2) Green Planet Radiant
More informationTable of contents. Tapes 4. Fiberglass Cloth 9. Fastening Systems 11. Polyurethane Foam 17. Rockwool 19
Table of contents Tapes 4 ALU Tape. 5 Reinforced ALU Tape. 5 Glass Tape. 6 Self-adhesive Glass Tape. 6 Laso - Tape. 7 Self-adhesive PCV Tape. 7 Rubber Tape - Armaflex. 8 Ceramic Tape. 8 Fiberglass Cloth
More informationInsulation - Products
www.british-gypsum.com Isowool insulation The Isowool glass mineral wool insulation range from British Gypsum-Isover provides fire-safe thermal and acoustic insulation for masonry, steel frame and timber
More informationGLASS FIBRE MESH FABRICS. Stronger ideas for a sustainable world ETICS. Marble slab reinforcement. Lightweight construction boards reinforcement
GLASS FIBRE MESH FABRICS Marble slab reinforcement ETICS Mosaic reinforcement Lightweight construction boards reinforcement Profile manufacture Render reinforcement Floor heating mats Stronger ideas for
More informationInsulation Materials Brochure
National Industrial Co New No 28, Old No 16 Mooker Nalla Muthu Street, Parry s, Chennai 600001 Phone: 044-25211028 Mobile: 9884308478 Email natindco@hotmail.com Website: www.natindco.web.officelive.com
More informationNEXUS FUSION. Firesafe lamella boards for insulating spandrel panels
NEXUS FUSION Firesafe lamella boards for insulating spandrel panels FIRESAFE STONEWOOL INSULATION FOR SPANDREL PANELS IN CURTAIN WALL SYSTEMS Euroclass A1 Fire performance Unique patented manufacturing
More informationFebruary savolitplus. natural building boards for sustainable construction
February 2014 savolitplus natural building boards for sustainable construction savolitplus savolitplus wood wool boards Savolit Plus is the result of continuous research and the desire to provide the best
More informationTechnical Assessment Body issuing the ETA: Kiwa Nederland B.V. Sinh Board
Member of Kiwa Nederland B.V. www.eota.eu Sir Winston Churchilllaan 273 NL-2288 EA Rijswijk Postbus 70 NL-2280 AB Rijswijk Tel.: +31 (0)88 998 44 00 Fax: +31 (0)88 998 44 20 E-mail: info@kiwa.nl European
More informationROCKWOOL Board Insulation Section Master Guide Specification Page 1 Jan 2017
Master Guide Specification Page 1 Click on the pilcrow in the MS Word Toolbar to toggle ROCKWOOL GUIDE NOTES on and off. Delete this text before incorporating the section into a Project Manual. 1 GENERAL
More informationMarine & Offshore Fire Divisions
Marine & Offshore Fire Divisions bulkhead & deck systems U-FW/GMM EN Rev: 2 Sept 18 Contents Page No. Introduction Installation Surface Coverings - General Principles - Anchors - System Repair and Maintenance
More informationFlat roofs. Flat roof design. 2.3 Flat Roofs
Flat Roofs Flat roof design Condensation Thermal insulation and the flow of heat and water vapour through a construction are inextricably linked. The position of thermal insulation, vapour control layer
More informationEDITION: UK & I - PUBLISHED 02/2015. PROROX Industrial insulation SEAROX Marine & Offshore Insulation. Product catalogue UK & Ireland
EDITION: UK & I - PUBLISHED 02/2015 PROROX Industrial insulation SEAROX Marine & Offshore Insulation Product catalogue UK & Ireland 1 We share our knowledge to your advantage ROCKWOOL Technical Insulation
More informationCEN/TC 88 - Thermal insulating materials and products
C/TC 88 - Thermal insulating materials and Standard reference CR 245:1986 822:1994 823:1994 824:1994 825:1994 826:1996 1602:1996 1602:1996/AC: 1603:1996 1603:1996/A1: 1603:1996/AC: 1604:1996 1604:1996/A1:
More informationLT/ArmaFlex. Industrial INSULATION FOR THE OIL AND GAS INDUSTRY. High density industrial grade FEF installation
INSULATION FOR THE OIL AND GAS INDUSTRY LT/ArmaFlex Industrial High density industrial grade FEF installation // Built-in water vapour barrier mitigates risk of corrosion under insulation (CUI) // Low
More informationGulf Cool Therm Polyurethane (PUR) Insulation
Gulf Cool Therm Polyurethane (PUR) Insulation Cold Insulation for Oil, Gas and Refinery Industries Cryogenic Insulation Pipe, Slabs and Board Insulation The Quality Insulation Products for Many Diverse
More informationSEPTEMBER construction type cavity barriers. SP Firestop Systems. The purpose-made solution for cavity fire stopping
SP Firestop Systems The purpose-made solution for cavity fire stopping SP Firestop Systems The purpose-made solution for cavity fire stopping As part of the comprehensive FIREPRO range of fire protection
More information1. Section 04300: Concrete Masonry Units
SECTION 072000 BOARD INSULATION PART 1 GENERAL 1.1 DESCRIPTION A. To be read with Division 1 General Requirements, Conditions of Contract and all associated drawings. B. Work of this section, as indicated
More informationfermacell AESTUVER Fire-protection board
fermacell AESTUVER Fire-protection board European Technical Assessment Datum: 30.09.2014 European Technical Assessment ETA-11/0458 of 30 September 2014 General Part Technical Assessment Body issuing the
More informationFire Protection and Applications
Fire Protection and Applications Technical Insulation Marine ins./fire protection 4-10.6.1 May 2008 Replaces: January 2008 Content PAROC Marine insulations meet all requirements...3 Steel decks and bulkheads...4
More informationEQUITONE [pictura] Material Information Sheet
1. Product Appearance EQUITONE [pictura] Material Information Sheet EQUITONE [pictura] is a coloured facade panel. The surface is smooth, matt, with double layer acrylic coating and a UV hardened PU top-coat
More informationPAROC FIRE PROTECTION SOLUTIONS FOR PIPE PENETRATIONS
PAROC FIRE PROTECTION SOLUTIONS FOR PIPE PENETRATIONS APPROVED FIRE SAFETY WITH PAROC STONE WOOL EN 1366-3 is a harmonized European standard for fire resistance tests for penetration seals. The test method
More informationPRODUCT CATALOGUE PROFLEXR. Thermal Insulation. CFC free HCFC free Zero Ozone Depletion Potential (ODP) Taking care of energy and Environment
PRODUCT CATALOGUE PROFLEXR Thermal Insulation CFC free HCFC free Zero Ozone Depletion Potential (ODP) Taking care of energy and Environment PROFLEX Proflex polyolefin foam thermal insulation for AirConditioning,
More informationHEATLOK SOYA/POLARFOAM SOYA
Spray-in-Place Urethane Foam Insulation page 1/6 HEATLOK SOYA/POLARFOAM SOYA Note: This specification should be adapted for each project. All notes are for guidelines only. An updated.word version could
More informationPIPEWORK INSULATION. 14/ Page 1 of 10 Pipework Insulation Rev D
PIPEWORK INSULATION 14/10-2014 Page 1 of 10 Pipework Insulation Rev D Contents INTRODUCTION General Scope Surfaces to be Insulated Pumps, Turbines etc Performance Minimum Pipe Insulation Thickness Physical
More informationRevision:C Pipework Insulation Issued:14/11/2012 PIPEWORK INSULATION CU14. 14/11/2012 Page 1 of 10 Pipework Insulation - RevC
PIPEWORK INSULATION CU14 14/11/2012 Page 1 of 10 - RevC Contents INTRODUCTION 5 General 5 Scope 5 Surfaces to be Insulated 5 Pumps, Turbines etc 5 Performance 6 Minimum Pipe Insulation Thickness 6 Physical
More informationK-FLEX K-FLEX ST 74 A NEW GENERATION OF INSULATION MATERIALS
K-FLEX 74 A NEW GENERATION OF INSULATION MATERIALS /SK pre-cut pipe insulation with adhesive sheets tubes Elastomeric insulation for all applications, both civil and industrial. Applications: Air-conditioning
More informationJune Non - Residential Refurbishment Separating floors
June 2010 Non - Residential Refurbishment 5.6.2 Separating floors Non-residential refurbishment 5.0 Non-residential Refurbishment Separating Floors Contents Introduction find online page Solution optimiser
More informationNEW. Product catalogue UK & Ireland. Wired Mat ASSORTMENT. PROROX Industrial insulation SEAROX Marine & Offshore Insulation. rockwool-rti.co.
EDITION: UK & I - PUBLISHED 07/2015 PROROX Industrial insulation SEAROX Marine & Offshore Insulation NEW ProRox Wired Mat ASSORTMENT rockwool-rti.co.uk Product catalogue UK & Ireland 1 We share our knowledge
More informationSP FIRESTOP SYSTEMS The purpose-made solution for cavity fire stopping
SP FIRESTOP SYSTEMS The purpose-made solution for cavity fire stopping FIREPRO SP FIRESTOP SYSTEMS The SP FireStop Slab has been specifically designed to form cavity fire stops within buildings. SP FireStop
More informationInsulation Board. Knauf Data Sheet PE-DS
Insulation Board Knauf Data Sheet PE-DS-2 12-06 Insulation Board Description Knauf Insulation Board is a thermal and acoustical insulation product made from inorganic glass fibers preformed into boards
More informationFire-resistant Sound absorbent High density for sag-free, tight fits Green features for sustainable development
Fire-resistant Sound absorbent High density for sag-free, tight fits Green features for sustainable development Batt insulation that fights both fire and noise Roxul s AFB is a lightweight, semi-rigid
More informationROCKWOOL Tapered Roofing
ROCKWOOL Tapered Roofing High Performance Tapered Insulation Boards The range is engineered to meet the demand for tapered solutions for existing and new flat roof constructions. The system is backed by
More informationProduct Information Sheet
Product Information Sheet Product Name ISOVER Metac - high performance insulation Metac G3 Touch is a high performance low lambda mineral wool insulation roll with both excellent thermal and acoustic properties.
More informationKnauf Data Sheet AH-DS-5E Friendly Feel. Duct Wrap. with ECOSE Technology
Knauf Data Sheet AH-DS-5E 07-09 Friendly Feel with ECOSE Technology Duct Wrap For cooling, heating or dual temperature service. Friendly Feel Duct Wrap meets the most stringent IAQ tests GREENGUARD Children
More informationRoofing. Sika-Trocal SG 1.5 mm. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 02.2015 Identification no. 02 09 01 01 122 0 150000 Version no. 02 Sika-Trocal SG 1.5 mm Polymeric membrane for roof waterproofing Product Description Sika-Trocal SG
More informationStyrodur C, Environmentally friendly extruded polystyrene free of CFC, HCFC, and HFC filled with air.
Styrodur C, Environmentally friendly extruded polystyrene free of CFC, HCFC, and HFC filled with air. Thermal insulation does more than protect the climate Effective thermal insulation with Styrodur C
More informationEcoTouch Insulation with PureFiber Technology
PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.
More informationPolymeric membrane for roof waterproofing
Roofing Product Data Sheet Edition 06.2012 Identification no. 02 09 05 05 100 0 180000 Version no. 01 Sikaplan -SGK 1.8 (Trocal SGK 1.8 mm) Polymeric membrane for roof waterproofing Construction Product
More informationCERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C Date of issue , Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
More informationa d v a n c e d e l a s t o m e r i c t h e r m a l a n d a c o u s t i c i n s u l a t i o n m a t e r i a l s
a d v a n c e d e l a s t o m e r i c t h e r m a l a n d a c o u s t i c i n s u l a t i o n m a t e r i a l s G E N E R A L O V E RV I E W O F P R O D U C T S A N D S Y S T E M S CFC and HCFC-free insulation
More informationSept 30, 2004 Page 1
Sept 30, 2004 Page 1 This section includes a manufacturer's guide specification for TERRAFOAM EPS building insulation. Refer also to Product Description for detailed product properties, options, and other
More informationROCKWOOL Board Insulation Section Master Guide Specification Page 1 Jan 2017
Master Guide Specification Page 1 Click on the pilcrow in the MS Word Toolbar to toggle ROCKWOOL GUIDE NOTES on and off. Delete this text before incorporating the section into a Project Manual. 1 GENERAL
More informationEFFISUS ECORK INSULATION
EFFISUS ECORK TECHNICAL DATA SHEET Effisus Ecork Insulation EFFISUS ECORK INSULATION DESCRIPTION Expanded insulation cork board. For use as internal insulation for buildings (see EN 13710) according to
More informationJune Residential Refurbishment Separating floors
June 2010 Residential Refurbishment 3.6.2 Separating floors Residential refurbishment 3.0 Residential Refurbishment Separating Floors Contents Introduction find online page Solution optimiser and pathfinder
More informationASF FR Board PRO RANGE Coated Mineral Wool Board for the Professional
Technical Data Sheet Version: 1 Revision Date: 11-04-2011 Description ASF FR Board has been designed to maintain the fire resistance of separating walls and floors where they are breached by single or
More informationK-FLEX K-FLEX ST 84 A N E W G E N E R A T I O N O F I N S U L A T I O N M A T E R I A L S
K-FLEX 84 A N E W G E N E R A T I O N O F I N S U L A T I O N M A T E R I A L S /SK pre-cut pipe insulation with adhesive sheets tubes Elastomeric insulation for all applications, both civil and industrial.
More informationINDUSTRIAL TEXTILE, INSULATION PACKINGS AND INSULATION MILLBOARD
INDUSTRIAL TEXTILE, INSULATION PACKINGS AND INSULATION MILLBOARD INDEX DIMERTERM STATIC PACKINGS 3 DIMERTEX INDUSTRIAL TEXTILES 4 DIMERTEX STATIC PACKINGS - TAPE 5 DIMERBOARD - HIGH TEMPERATURE INSULATING
More informationTechnical data sheet. Product of Company certified according to UNI EN ISO 9001:2000 specifications, with CE conformity mark on the whole range.
Prodotto Descrizione Linee guida per la stesura di capitolati tecnici Pag. 1/5 DESCRIPTION STIFERITE is an high performance insulation board manufactured from CFC or HCFC free closed cell rigid polyisocyanurate
More informationTHERMAL SOUND & FIRE INSULATION
THERMAL SOUND & FIRE INSULATION METAL FACING SANDWICH PANEL SANDWICH PANELS POLYURETHANE SANDWICH PANEL Sandwich panels are composite materials produced of two galvanized corrugated plates filled with
More informationAdvantages of Thermal Insulation
ROCKWOOL People living close to the volcanic area, had known Rock Wool since a long time. They observed mineral fibers being formed around volcano crater; these fibers are produced from the eruption of
More informationPhenolic foam thermal insulation products for buildings and building services end use applications
BS xxxx-1:2010 Phenolic foam thermal insulation products for buildings and building services end use applications Part 1 - Specification for phenolic foam (PF) products for use as thermal insulation for
More informationThe new high-performance lining for internal and external applications INSIDE OR OUT YOUR CHOICE
The new high-performance lining for internal and external applications INSIDE OR OUT YOUR CHOICE Introduction Glasroc X is a high performance building board with a gypsum core containing special additives
More informationConstruction. Sika-Trocal SGmA 1.5 mm. Polymeric membrane for roof waterproofing. Product Description
Roofing Product Data Sheet Edition 03.2009 Identification no. 02 09 01 01 124 0 150000 Version no. 03 Sika-Trocal SGmA 1.5 mm Polymeric membrane for roof waterproofing Construction Product Description
More informationTechnical Specification Sprayfiber-F Fire Protection Department
INABENSA INABENSA Technical Specification Fire Protection Department Technical Characteristics is a mortar made by mineral wool and hydraulic binders, dry and inorganic, manufactured by Inabensa Protisa,
More informationRockLap H&V pipe sections
RockLap H&V pipe sections For rapid, efficient pipework insulation RockLap H&V Pipe Sections are strong lengths of pre-formed insulation with a one piece, factory applied foil facing with integral self-adhesive
More informationTechnical Specification Sprayfiber-Thermal Fire Protection Department
INABENSA INABENSA Technical Specification Fire Protection Department Technical Characteristics is a mortar made by mineral wool and hydraulic binders, manufactured by Inabensa Protisa, developed specifically
More informationThermaSheet. multi-purpose insulated tile backer panels
ThermaSheet multi-purpose insulated tile backer panels A CODE PRODUCT DIMENSIONS RTTBB-06-1200 ThermaSheet Tile Backer Board 6mm 1200mm x 600mm RTTBB-10-1200 ThermaSheet Tile Backer Board 10mm 1200mm x
More informationSheathing Board Xtra protection, built in.
Sheathing Board Xtra protection, built in. Introducing Glasroc X Sheathing Board Glasroc X is a high performance sheathing board which provides up to 6 months weather protection as certified by the BBA*.
More informationFabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Klick KS500 DLKK
Fabrications, Safety & Lighting Solutions Kingspan Day-Lite KS500 DLKK Applications Kingspan Day-Lite is a secret-fix wall light system typically suited for vertical applications. Featuring an innovative
More informationENERGYSAVER. Blown cavity wall insulation
Blown cavity wall insulation ENERGYSAVER Cost-effective blown cavity wall insulation. ROCKWOOL ENERGYSAVER is a vapour permeable insulation system for masonry cavity walls that allows the construction
More informationType Jablite board is available as EPS 100, 150, 200, 250 as defined in BS EN Flame-retardant additive material is available to order.
For technical information 0870 444 8769 technical@jablite.co.uk 3Floor Insulation APPLICATION: Floor insulation cold store floor Product: Jablite board Floors in chill and cold stores are usually subject
More informationRainscreen Ventilated Fire Barrier
An intumescent FR barrier for slab edge, curtain wall and façade applications Technical Data Sheet KEY BENEFITS - Allows air movement in building design whilst providing superior fire rating - Fire Resistance
More informationSIDERISE CBX flexible acoustic barriers for suspended ceilings
INTERIORS: CBX FLEXIBLE ACOUSTIC BARRIERS Version 2 : April 2015 SIDERISE CBX flexible acoustic barriers for suspended ceilings A flexible composite quilt designed for free-hanging in ceiling voids that
More informationProduct Information Sheet
Product Information Sheet Product Name ISOVER Spacesaver Roll A mineral wool roll for domestic attic floors. Rolls pre-perforated to 3 x 386cm and 2 x 580cm widths to fit between common joist spacings.
More informationProduct Information Sheet
Product Information Sheet Product Name Comfort Roll 35 A high performance insulation roll that saves space and increases thermal insulation performance. Soft tissue face for easy handling with gridlines
More informationAsk for the DECLARATION OF PERFORMANCE for all products bearing CE mark. Compressive strength. after 28 days of curing Capillary water absorption
European Standards In early 2000, the European Union created and adopted a new classification system for adhesives and grouts. According to European Standards, classes EN 12004 and 12002 were created for
More informationCork, an exceptional raw material
Construction Cork, an exceptional raw material Cork is the outer bark of the cork oak tree (Quercus Suber L.), the 100% natural plant tissue covering the trunk and branches. It consists of a honeycomb-like
More informationself-adhesive overlapping selvage
Physically reticulated polyethylene thickness 10 mm nominal self-adhesive overlapping selvage Elastoplastomeric mass Laying side TECHNICAL CHARACTERISTICS Acustic System 10, is a two-layer footfall noise
More informationURSA ACOUSTIC ROLL URSA GLASSWOOL.
URSA GLASSWOOL E-mail : ursauk@uralita.com URSA UK LTD Crest House 102-104 Church Road Teddington, Middlesex TW11 8PY United Kingdom Tel : 020 8977 96 97 Fax : 020 8977 94 56 Web : www.ursa-uk.co.uk E-mail
More informationProRox 400 Series. Fabricated Industrial Solutions
ProRox 400 Series Fabricated Industrial Solutions ROXUL Fabricated Insulation Solutions The ProRox 400 Series fabricated product line offers board (slab) insulation solutions that can be fabricated into
More informationDesign No. HI/BP PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table 1
FIRESTOP JOINT SPRAY CFS-SP WB SILICONE JOINT SPRAY CFS-SP SIL F-RATING 2-HR. 2-HR. T-RATING -HR. -HR. APPLICATION THICKNESS PERIMETER FIRE BARRIER SYSTEM Hilti, Inc. ASTM E 2307 Table /8" WET FILM (/6"
More informationSelecting floors and ceilings
floors and ceilings email: bgtechnical.enquiries@bpb.com www.british-gypsum.com/health 89 floors and ceilings Introduction 9 Solutions - key systems 9 Solutions for concrete floors 9 - Dense slab 9 This
More informationEasylationWall. External Wall Insulation System. bringing european innovation
EasylationWall External Wall Insulation System bringing european innovation EasylationWall... the new External Wall Insulation System using brick slips for stunning façades. EXTERNAL WALL INSULATION (EWI)
More informationTechnical Assessment Body issuing the ETA and designated according to Article 29 of the Regulation (EU) No 305/2011: UL International (UK) Ltd
Member of www.eota.eu UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. designated according to Article 29 of the Regulation (EU)
More informationFOR FURTHER INFORMATION ON THE NILFLAM RANGE OF PRODUCTS PLEASE TELEPHONE THE KINGSPAN TECHNICAL SERVICES DEPARTMENT (01457)
FOR FURTHER INFORMATION ON THE NILFLAM RANGE OF PRODUCTS PLEASE TELEPHONE THE KINGSPAN TECHNICAL SERVICES DEPARTMENT (01457) 861611 INDUSTRIAL INSULATION Kingspan Industrial Insulation Limited PO Box 3,
More informationACOUSTIC BARRIERS DWX SERIES FOR DUCTWORK
DWX SERIES ACOUSTIC BARRIERS FOR DUCTWORK A SOFT FLEXIBLE QUILT WITH AN OUTER HEAVY POLYMERIC ACOUSTIC MEMBRANE, OFFERING EXCELLENT DURABILITY AND SOUND INSULATION QUALITIES, THAT CAN BE USED IN A VARIETY
More informationPraval Adhaulia K-FLEX INDIA PVT LTD
Praval Adhaulia K-FLEX INDIA PVT LTD IK Insulation Group - Corporate - 2009 Thermal and Acoustic Products Thermal Insulation Is a material having relatively high resistance to heat flow Stationary air
More informationCertaPro Thermal FSK-25 Faced Batts
CertaPro Thermal FSK-25 Faced Batts ASTM C 553, Type I ASTM C 665, Type III, Class A, Category 1 New York City MEA 19-80-M Light-density fiber glass batts with a foil scrim kraft (FSK) fire resistant vapor
More informationULTIMATE Tech Wired Mats High performance for high temperatures
ULTIMATE Tech Wired Mats High performance for high temperatures What do you want to win: energy cost savings, space savings, weight savings? Isover ULTIMATE Tech Wired Mats are always offering the right
More information