Cepex Sales Folder 12/ PVC Flexible Hose Cepexflex
|
|
- Candace Potter
- 6 years ago
- Views:
Transcription
1 Cepex Sales Folder 12/ Cepexflex 1
2 Introduction PVC flexible hose with internal reinforcement and smooth interior and exterior surface. Spiral rigid reinforced: indeformable antishock. Hermetic socket and resistant in the union at 30 bar. pressure. Great resistance to residual waters and a large range of chemicals. Dimensions and characteristics according EN-ISO It supports temperatures between -10º C and +55º C and an absolute vacuum pressure of 350 mbar. 2
3 Cepexflex features Main features: flexibility, lightness and strength External diametrers adjusted to make an easier installation with PVC fittings (solvent socket unions) and PP (compression unions), perfect for Cepex fittings (with AENOR certification) Marking of specifications in each meter of hose Color grey (white on order) Shrinkwrapped packaging of high quality and resistance Flexibility higher than the other products of the competition. It doesn t use added materials in the PVC, so the hose keeps the form after submit it to high twists 3
4 Advantages and disadvantages Ideally suited for wasting applications and loading and unloading applications Easiness in the installation due to its flexibility and to the kind of material Good for applications in hydrotherapie or swimming pools, where the system pressure is low, very extended use thanks to its installtion easiness Reduction in the use of fittings thanks to its great adaptability, it s able to reach all the parts of an installation without making lots of unions It doesn t support great pressures Until D32 maximum pressure 22 bar. From D40 maximum pressure 16 bar. It doesn t support concentrations of chlorine 4
5 Advantages and disadvantages Marking in each meter of hose: 0 mts Lenght from the tube start L-B Extrusion line 26x32 Inner & outer diameter EN-ISO 3994 Size standard T-2 Hosetype - Logotype 0504R15 Manufacturing date 5
6 Advantages and disadvantages Inner cut: Spiral reinforcement in the whole hose. Gives it a better flexibilty and strength Inner surface completely smooth. Avoids the accumulation of particles and the friction with the transported fluid 6
7 Certifications: AENOR (Asociación Española de Normalización y Certificación): (achieved recently), with this certificate, the product is placed at the same level than the strongest competition.
8 Union possibilities Is recommended to do the unions with Cepex PVC fittings (the only ones with AENOR certification). The reccomended solvent cement is Cepex Bondtite, specially indicated for unions with PVC flexible hose. The unions with Cepex PP compression fittings Performance Series are possible also, these unions offer a quick installation/dismantle. 8
9 Union possibilities It is possible to change the system from flexible hose to rigid pipe using the Cepex fittings (compression and PVC ones). Compatibility between the two systems is perfect. PVC RÍGIDO PVC FLEXIBLE Machó n mixto PVC Encolar hembra x roscar hembra Enlace mixto PP a compresi ón PVC FLEXIBLE 9
10 Cepexflex 2006: wider range with D16 and D5!! Technical characteristics: Logistic data: Outter D D exterior Inner D D interior Wall thickness Espesor pared Weight Peso Maximum working pressure Máxima presión de servicio Maximum working pressure Máxima presión de servicio Vacuum Vacío (mm) (mm) (mm) 23ºC 55ºC (bar) (m/h 2 O) , , , , , ,3 D PALLET CODE Dimensions rolls / pallet m / pallet grey - gris white - blanco 25 m rolls rollo de 25 m x 120 x x 120 x x 120 x x 120 x x 120 x x 80 x x 90 x x 120 x m rolls rollo de 50 m x 120 x x 120 x x 120 x x 80 x x 80 x x 120 x
11 Installation Advices: Normal installation with solvent socket fittings and with compression fittings. Pay special attention in underground installations, be careful that there are no stones or materials that could damage the hose (is useful the use of sand to cover it). In swimming pools installations or hydroterapie, keep it far away of high concentrations of chlorine (in example: skimmer outlets). 11
12 Quality Tests applied to the flexible hose: - For each injected pipe: Samples registration and size checking every 4 injection hours. - Every 24 hours: Hydrostatic pressure test - Every consignment: Bending radius test Cold bending radius test Vacuum test Hydrostatic pressure test Reinforcement fracture test - 4 times a week/diameter: Pulsation pressure test All these controls are explained in the Quality Tests CSF. 12
13 Applications Used in several load and unloading applications: Hydro-sanitary conductions, filtration of swimming pools, hydrotherapie, drainage, etc... 13
14 Applications Industry Planta de tratamiento de aguas de Deerfield West 14
15 Applications Irrigation Fitosanitary humidifier for a greenhouse 15
16 Cepex Sales Folder 12/2006 COPYRIGHT CEPEX HOLDING, S.A. Av. Ramon Ciurans, 40 Pol. Ind. Congost - Parcel la La Garriga (Barcelona) Spain cepex@cepex.com 01 PVC Pressure Fittings 02 PP Compression Fittings 03.s Ball Valves [STD] Series NEW! 03.i Ball Valves [IND] Series NEW! 03 Ball Valves 04 Check Valves 05.s Butterfly Valves Standard Series NEW! 05.i Butterfly Valves Industrial Series NEW! 05.c Butterfly Valves Classic Series 06 Valve Boxes Pro Series 0 PE 100 Fittings 08 PVC Flexible Pipe 09 Actuated Valves 10 Hydraulic Valves 11 Filtration A Plastics Market B Fluid Dynamics C Plastic Types D Union Types E Quality Tests 1
Cepex Corporate Presentation 2014
Cepex Corporate Presentation 2014 Index Who is Cepex Cepex as a part of Fluidra Distribution network Logistics History Actuation Fields Product Range R & D Cepex Quality Cepex Certification Worldwide Aplications
More informationCorporate Presentation
Corporate Presentation EVERY BEGINNING IS HARD But we managed to grow Timeline Our Beginning and The New Era Our First Working Day Plexistab Bulgaria was founded in year 2000 as a trading company. 2000
More informationVINYL PROCESS PIPING SYSTEMS. Complete systems of pipe, valves and fittings designed, manufactured and backed by one company.
I N D U S T R I A L S Y S T E M S VINYL PROCESS PIPING SYSTEMS Complete systems of pipe, valves and fittings designed, manufactured and backed by one company. We build tough products for tough environments
More informationPresented by: Thermoplastic Piping
Presented by: Thermoplastic Piping VARI-TECH is an acronym for VARIOUS TECHNOLOGIES. The original thrust of the company was to bring engineered products and services to the Northeastern United States market.
More informationCORRUGATED HDPE PIPES FOR SEWER AND STORMWATER
50 corrugated pipes CORRUGATED HDPE PIPES FOR SEWER AND STORMWATER TECHNICAL SPECIFICATIONS SANS 21138-3 ISO 9001/2008 The pipe is black outside and blue on the inside Supplied in lengths of 6 meters.
More informationLarge polyethylene pipes
Large polyethylene pipes Krah pipes for pressure application Krah-Pipes are large polyolefin pipes up to an internal diameter of 4000mm and a maximum solid wall thickness of 200mm. The preferred jointing
More informationVariety, economy and efficiency
Variety, economy and efficiency A complete range of filters for domestic swimming-pools suitable for all demands and applications. Bobbin wound polyester sand filters Industrial quality and performance
More informationTECHNICAL INFORMATION ABOUT POLYBUTEN (PB) PIPING SYSTEM FOR HOT & COLD WATER SUPPLY IN HIGH RISE BUILDINGS
Page 1 of 13 TECHNICAL INFORMATION ABOUT POLYBUTEN (PB) PIPING SYSTEM FOR HOT & COLD WATER SUPPLY IN HIGH RISE BUILDINGS FROM TERRAIN SDP Page 2 of 13 TABLE OF CONTENTS Material properties The System TERRAIN
More informationCanadian Standards Association Thermoplastic pressure piping compendium
Contents Technical Committee on Plastic Pressure Piping xx Preface xxiii Foreword xxv B137.0-05, Definitions, general requirements, and methods of testing for thermoplastic pressure piping 1 Scope 3 2
More informationINTRODUCTION. We are extremely interested in getting an opportunity to work with you. We assure you of our best services at all times.
INTRODUCTION We take this opportunity to introduce ourselves as one of the leading Importers, Exporters & Suppliers of Pipe Supporting systems, PVC, PPR, PPR-CT, CPVC, HTTP & HDPE - Pipes, Fittings, Valves,
More informationSPC recently concluded a partnership with a leading Italian company providing innovative and complete polyethylene pipe systems in 30 countries.
50 corrugated pipes SPC celebrates 50 years of manufacturing concrete pipes and related products for the Southern African market. To further serve the region, SPC is proud to announce the manufacturing
More informationBest Practices for Chemical Facility Design in Water Treatment. Sara N. Gibson, P.E.
Best Practices for Chemical Facility Design in Water Treatment Sara N. Gibson, P.E. Overview Introduction Design Considerations Storage Tanks Recirculation / Transfer Pumps Metering Pumps Piping and Valves
More informationCEMPUR THE PERFECT COMBINATION OF INNOVATIVE COATING EXPERTISE
CEMPUR THE PERFECT COMBINATION OF INNOVATIVE COATING EXPERTISE Ductile cast-iron pipes with optimised energy efficiency for high-performance applications CEMPUR Our strongest component CEMPUR pipes feature
More information1.0 Abrasion resistant polyurethane hoses PUR to 150 о С
1.0 Abrasion resistant polyurethane hoses PUR to 150 о С Compared to many other plastic hoses, the polyurethane hoses NORRES (PUR) have the following distinctive features: ^ Less wear (from 2.5 to 5 times
More informationINTERNATIONAL SIMPOSIUM
INTERNATIONAL SIMPOSIUM 1996 WATER CONDUCTION FOR INFLATADLE HOSE IRRIGATION Inn. Raul Valdez Lopez PLHSTOZn RGHOPLHSTCOS V SERVICIOS MEXICO s i m p o s i u m internacional 1996 ENGINEER RAÚL VALDÉZ LÓPEZ.
More informationIntroduction. What is CPVC?
Introduction World Plastics is the leading company in the development and manufacture of advanced piping systems since 1984. Our uniquely wide-range of large and small bore piping systems are capable of
More informationRP Revision 10. Date
AENOR Mark Specific Rules for polyethylene compounds (PE) intended for the manufacturing of pipes and fittings for water supply and sewerage under pressure Note: This document is a translation of the Spanish
More informationManual Pipe Bender. Product Description. Specifications. Ordering Information
Bending and Forming Manual Pipe Bender HHW-25S HHW-25S is a portable pipe bending tool set for cold bending. Clean, smooth bending arc for use. Quick bending for U type. Strong plastic carry case and dies
More informationPVC pressure pipe (grey)
PVC pressure pipe (grey) PVC pressure pipe is used for the transport of liquids under pressure. The product range is divided into various pressure classes that indicate the maximum working pressure. The
More informationDROSSBACH HD Series Corrugated Plastic Pipe Machines.
DROSSBACH HD Series Corrugated Plastic Pipe Machines. Drossbach HD series Fast, efficient and more flexible corrugated plastic pipe production. DROSSBACH has been producing corrugated plastic pipe machines
More informationSECTION SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM
SECTION 13 1100 SWIMMING POOLS STAINLESS, FULL TILE, OR TILE TRIM This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as
More informationAlways. Reliable. Tight. Cable sealing system Cable entry system KES-M90. cablepipebuildingentry+
Always. Reliable. Tight. Cable sealing system Cable entry system KES-M90 cablepipebuildingentry+ Cable entry system KES-M90 KES-M90-D Features and technical data: pressure-tight ducting system up to 2.5
More informationHOUSING PLUMBING & SEWER CONNECTIONS CHRIS PRICE TECHNICAL SERVICES OFFICER BIMOSE TRIBAL COUNCIL
HOUSING PLUMBING & SEWER CONNECTIONS CHRIS PRICE TECHNICAL SERVICES OFFICER BIMOSE TRIBAL COUNCIL COPPER PIPING ALLOWED BELOW GRADE COPPER PIPING ALLOWED BELOW GRADE SIZING OF SEWER PIPING MINIMUM SIZE
More informationSIZE SIZE WALL THICKNESS WORKING LENGTH
PVC BRAIDED HOSE PVC BRAIDED AIR HOSE SIZE SIZE WALL THICKNESS WORKING LENGTH and smooth finishing IN IN MM PRESSURE METERS INCH MM KGS/CM2 1/4" 6 3.00 25.00 100 Braided Air Hose offers higher 5/16" 8
More informationHow To Construct a Ferro Cement Tank
How To Construct a Ferro Cement Tank Be Advised The following power point presentation assumes that individuals using it to construct ferro-cement tanks have a basic knowledge of geometry and calculating
More informationBest Value Drip Irrigation Products High Quality Yet Affordable
Best Value Drip Irrigation Products High Quality Yet Affordable Right Choice of Every Farmer Driptech offers affordable drip irrigation solutions ; innovative novel high performance drip irrigation system
More informationHYDROTECH TM MS3 MULTI-LAYER PVC-U PIPE SYSTEMS SUITABLE FOR BUILDINGS, HOUSES AND CIVIL CONSTRUCTION PURPOSES.
HYDROTECH TM MS3 MULTI-LAYER PVC-U PIPE SYSTEMS SUITABLE FOR BUILDINGS, HOUSES AND CIVIL CONSTRUCTION PURPOSES. CONTENTS PRODUCT FEATURES & ADVANTAGES 22 Hydrotech MS3 Pipes 3 Hydrotech - 3 Layer Technology
More informationIntroduction. What is CPVC?
Introduction World Plastics is the leading company in the development and manufacture of advanced piping systems since 1984. Our uniquely wide-range of large and small bore piping systems are capable of
More informationPRODUCT SPECIFICATIONS FOR PRODUCTS AND MATERIALS. Numerical Listing
S FOR PRODUCTS AND MATERIALS Numerical Listing WSA PS 200 WSA PS 201 WSA PS 202 WSA PS 202S Ductile Iron Pipes (CIOD) for Pressure Applications - Water Supply and Sewerage Ductile Iron Fittings (CIOD)
More informationA reliable solution for ditching, underpassing and rainwater drainage
PIPES AND CHAMBERS CULVERT PIPES A reliable solution for ditching, underpassing and rainwater drainage Culvert pipes are used to convey drain pipe water or rainwater under the ground. The smallest (110
More informationMUNICIPEX WATER SERVICE LINE TESTED. TRUSTED. CHOSEN BY PROFESSIONALS. Automotive Industry
MUNICIPEX WATER SERVICE LINE TESTED. TRUSTED. CHOSEN BY PROFESSIONALS. www.municipex.com Construction Automotive Industry ENGINEERED FOR POTABLE WATER ONE BILLION FEET OF INSTALLATION EXPERIENCE REHAU
More informationWATER AND SEWAGE SYSTEMS
MORE THAN 30 YEARS OF EXPERIENCE INDUSTRY CATALOGUE WATER AND SEWAGE SYSTEMS WATER AND SEWAGE SYSTEMS INDUSTRY AND MINING TELECOMMUNICATI ONS AND POWER INDUSTRY INTERNAL INSTALLATION S SPORTS AND RECREATION
More informationIntelligent solutions reliably fulfilling the requirements of the maritime industry and the responsibility towards the maritime environment
Merchant Fleet Intelligent solutions reliably fulfilling the requirements of the maritime industry and the responsibility towards the maritime environment Over the years, the global shipbuilding market
More informationCONNECTION TECHNIQUES
CONNECTION TECHNIQUES FOR PLASTIC PIPING SYSTEMS SOLVENT CEMENTS CLEANERS TOOLS LUBRICANTS Griffon. Committed to professionals. GRIFFON THE PERFECT CONNECTION QUALITY Opting for Griffon means opting for
More informationTECHNO GROUP TECHNO PLAST. TECHNO PLAST : Pipe Extrusion manufacturer. TECHNO FIT : Injection moulding manufacturer
TECHNO GROUP TECHNO PLAST : Pipe Extrusion manufacturer TECHNO FIT : Injection moulding manufacturer TECHNO ALIMCO : Blow Moulding manufacturer TECHNO COR : Corrugated Pipe manufacturer TECHNO THERM :
More informationA STAINLESS STEEL PRESS FIT SYSTEM FOR INDUSTRY FAST, SAFE AND CORROSION RESISTANT
A STAINLESS STEEL PRESS FIT SYSTEM FOR INDUSTRY FAST, SAFE AND CORROSION RESISTANT Looking for the advantages of a stainless steel pipe system, without long and tedious installation time, hassles of hot
More informationAENOR Mark Specific Rules for Multilayer piping systems for hot and cold water installations inside buildings
AENOR Mark Specific Rules for Multilayer piping systems for hot and cold water installations inside buildings Note: This document is a translation of the Spanish document RP. 01.71 rev 5 approved by the
More informationSEWER & DRAIN SYSTEMS 1 SEWER & DRAIN SYSTEMS CATALOGUE
SEWER & DRAIN SYSTEMS 1 SEWER & DRAIN SYSTEMS CATALOGUE WWW.SIZABANTUPIPINGSYSTEMS.COM SEWER & DRAIN SYSTEMS 2 Table of Contents Table of Contents Foamcore 2 The Product 2 PVC-U a material of choice 2
More informationS T A N D A R D. ANSI/ASAE S376.2 JAN1998 (R2004) Design, Installation and Performance of Underground, Thermoplastic Irrigation Pipelines
ANSI/ASAE S376.2 JAN1998 (R2004) Design, Installation and Performance of Underground, Thermoplastic Irrigation Pipelines S T A N D A R D ASABE is a professional and technical organization, of members worldwide,
More informationA. Section Fire Procection, HVAC & Plumbing Penetration Firestopping. B. Section Interior Painting: Painting insulation jacket.
SECTION 230719 - HVAC PIPING INSULATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Piping insulation. B. Jackets and accessories. 1.2 RELATED REQUIREMENTS A. Section 07813 - Fire Procection, HVAC & Plumbing
More informationMulticell. Vikimatic MultiCell Conduit Systems MULTICELL
Multicell Vikimatic MultiCell Conduit Systems These guidelines should help you install MultiCell Conduit in the simplest way possible and should be read in their entirety before attempting to install the
More informationDESIGN OF SEWER SYSTEMS
Wastewater Engineering (MSc program) DESIGN OF SEWER SYSTEMS Prepared by Dr.Khaled Zaher Assistant Professor, Public Works Engineering Department, Faculty of Engineering, Cairo University 1. Sewer Materials
More informationclimatherm We set the standards for quality and reliability! P I P E S Y S T E M S
climatherm We set the standards for quality and reliability! P MADE IN I P E S Y S T E M S GERMANY aquatherm-climatherm The climatherm-pipe system includes all elements for the pipe system installation
More informationPIPING SOLUTIONS Drainage HDPE OD DRAINAGE PIPES
PIPING SOLUTIONS Drainage HDPE OD DRAINAGE PIPES 190 BELOW GROUND HDPE OD DRAINAGE PIPES HDPE drainage corrugated pipes 191 HDPE DRAINAGE CORRUGATED PIPES The need for water is a basic life requirement.
More informationPP-R and PP-RCT Pipe Systems
Product Guide PPR and PPRCT Pipe Systems Hot and Cold Water Systems and Heating Applications Fore Word Plastic Products Inc. started production in 97 and has always been a leader in the plastic sector
More informationUltimate Pipeline Systems POWER PLASTIC FACTORY LLC.
Ultimate Pipeline Systems POWER PLASTIC FACTORY LLC e-mail: powerbmm@emirates.net.ae www.powergroups.ae Disclaimer All information in this catalogue is correct to our best of knowledge at the time of preparation.
More informationExternal Reinforcement System
(Revised October 2013) Specifications of SMC Water Tank Product External Reinforcement System DOHA INDUSTRY CO., LTD. Table of Contents 1. General Matters A. Scope of Application B. Product Requirements
More informationPipeline Accessories. PSI Wall Sleeves. General Information Selection Guide Technical Data Installation Instruction
Pipeline Accessories PSI Wall Sleeves General Information Selection Guide Technical Data Installation Instruction 1 PSI Wall Sleeves made of steel General Information An economic method to seal hydrostatically
More informationPIPING SOLUTIONS Drainage HDPE ID DRAINAGE PIPES
PIPING SOLUTIONS Drainage HDPE ID DRAINAGE PIPES 196 BELOW GROUND HDPE ID DRAINAGE PIPES Polietylene corrugated ID drainage pipes Excess water in the soil can cause serious problems on land and objects
More informationHOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST
HOSES FLEXIBLE CONNECTIONS EXPANSION JOINTS THE SPECIALIST 2 3 WEAR RESISTANT FLEXIBLE INDUSTRIAL TRANSPORT VEINS Pipes and hoses are the transport veins for industrial processes. Often special solutions
More informationINDEX -INTRODUCTION -PREFABRICADOS DELTA PIPING SYSTEM -ADVANTAGES OF CONCRETE PRESSURE PIPE -PRESTRESSED CONCRETE PRESSURE PIPE WITH STEEL-CYLINDER
INDEX -INTRODUCTION -PREFABRICADOS DELTA PIPING SYSTEM -ADVANTAGES OF CONCRETE PRESSURE PIPE -PRESTRESSED CONCRETE PRESSURE PIPE WITH STEEL-CYLINDER -REINFORCED CONCRETE PRESSURE PIPE WITH STEEL-CYLINDER
More informationCUSTOMISED PRODUCTS INNOVATION THROUGH DIVERSITY. Building Solutions Automotive Industry
CUSTOMISED PRODUCTS INNOVATION THROUGH DIVERSITY www.rehau.com Building Solutions Automotive Industry COVREX BY REHAU THE HARDTOP SWIMMING POOLS REHAU PASSIONATE ABOUT POLYMERS REHAU develops and provides
More informationBATHROOM LINEAR AND POINT DRAINAGE INLETS
BATHROOM LINEAR AND POINT DRAINAGE INLETS MANUFACTURER OF MODERN BATHROOM DRAINAGE SYSTEM www.capricorn.pl DESIGN SELECT ONE OF GENUINE GRATE PATTERNS FUNCTIONALITY AND ELEGANCE OF AQUA AMBIENT DRAINAGE
More informationHDPE HDPE. Factory PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT. Since 2002 HDPE. for Sewerage Storm Water System HDPE
PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT for Sea Water Intake for Gas Transportation for Sewerage Storm Water System Manholes Factory Since 2002 for Cold Water Supply & Irrigation
More informationSanitary Installations. Product Catalogue.
Sanitary Installations Product Catalogue www.hydroplast.de Pipe SDR 11 Art. no D s kg/m m/pack G11001 20 1,9 0,107 200 G11002 25 2,3 0,164 160 G11003 32 2,9 0,267 80 G11004 40 3,7 0,412 60 G11005 50 4,6
More informationHEATING & SANITARY. Environment is our challenge SMOOTH-WALL PIPE CORRUGATED PIPE PIPE-IN-PIPE INJECTION-MOLDED PARTS TOOLS & ACCESSORIES
HEATING & SANITARY SMOOTH-WALL PIPE CORRUGATED PIPE PIPE-IN-PIPE INJECTION-MOLDED PARTS TOOLS & ACCESSORIES Environment is our challenge MULTI-LAYER SMOOTH- WALL PIPES MULTI-LAYER COMPOSITE PIPES MULTI-LAYER
More informationIntroduction. Mechanical Characteristics of PEX.
Introduction C o n c e p t P i p i n g S y s t e m s Industries (formally Gulf Dura Industries) is committed to continuously develop & maintain the manufacture & supply of world class construction materials,
More informationDUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
More informationPlastic Pipe and Fittings Association ASTM D2239, D3035, D2737
Irrigation NSF 14 and 61 Potable Water AWWA C901-08 Cold Water Service IAPMO PS24-69 Plastic Pipe Institute Uniform Plumbing Code Plastic Pipe and Fittings Association ASTM D2239, D3035, D2737 DriscoPlex
More informationHigh quality with reasonable price
High quality with reasonable price V01/2013 1 Company KANEX KANEX is a manufacturer of OEM products according to customer design and project. We provide our customers with high quality and tested products.
More informationPipes APPLICATIONS PIPES AND FITTINGS COMPATIBILITY. A full range for the perfect installation. Comap provides a wide choice to complete
APPLICATIONS Comap connection systems combine different fitting technologies with pipes of different materials to cover the maximum number of applications. PIPES AND FITTINGS COMPATIBILITY Fitting range
More informationHDPE PIPE SYSTEM ACE FLOWTECH CO., LTD. GLOBAL PIPING SOLUTIONS PROVIDER!
R ACE FLOWTECH CO., LTD HDPE PIPE SYSTEM R Ace Flowtech Co., Ltd, a subsidiary of JM Quan en Group Office address: No.2, 2-1601, Rongyuan Road, Huayuan Industrial Park, Tianjin Binhai Hi- Tech Area, Tianjin
More informationHDPE HDPE. Factory PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT. Since 2002 HDPE. for Sewerage Storm Water System HDPE
PRESSURE PIPING SYSTEM DRAINAGE & SEWERAGE PIPING CABLE DUCT & SUB DUCT for Sea Water Intake for Gas Transportation for Sewerage Storm Water System Manholes Factory Since 2002 for Cold Water Supply & Irrigation
More informationSECTION 13. A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications.
SECTION 13 PIPE, TUBE AND PART 1 - GENERAL 1.01 DESCRIPTION A. Extent of Work: The requirements of this section apply to the piping systems specified elsewhere in these specifications. 1.02 QUALITY ASSURANCE
More informationIndustrial Product Catalogue
Industrial Catalogue www.ipexinc.com ISSUE DATE: NOVEMBER 2011 Process Piping Systems Double Containment Systems Acid Waste Piping Systems Compressed Air Systems Thermoplastic Valves Specialty s We build
More informationGuideline No.: P-08(201510) P-08 FLEXIBLE HOSE. Issued date: October 20,2015. China Classification Society
Guideline No.: P-08(201510) P-08 FLEXIBLE HOSE Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
More informationPTFE semi-finished product range
PTE semi-finished product range 1 Semi-finished products made of PTE Precursors for industry We have a wide range of semi-finished products made of PTE and PTE compounds including solid and hollow rods,
More informationCustomised Gasifier Feed Pumps. Daniel M. Nägel FELUWA Pumpen GmbH
Customised Gasifier Feed Pumps Daniel M. Nägel FELUWA Pumpen GmbH Naegeld@feluwa.de Hydrostatic displacement Pumps Oscillating Pumping Characteristic Piston Pump The conveyed fluid is in contact with sliding
More informationINTRODUCTION TO HDPE PIPES : -
INTRODUCTION TO HDPE PIPES : - HDPE pipes conform to IS-4984/95 and manufactured also as per IS-14333, ISO- 4427, ISO-4437 & DIN 8074 specifications. HDPE pipes are best preferred for potable water supply,
More informationwater & sewerage aquaculture fish & industry
Brimer is one of Europe s leading producers of products in Glass Reinforced Plastic (GRP) and composites to several industries. Our main markets are within water and sewerage, aquaculture, fish and industry.
More informationTANK SUMPS SINGLE WALL & DOUBLE WALL
TANK SUMPS SINGLE WALL & DOUBLE WALL FIBERGLASS TANK SUMPS Containment Solutions, Inc. (CSI), pioneered a technology in 1965 to manufacture the first fiberglass petroleum storage tank to combat the shortcomings
More informationSECTION STORM UTILITY DRAINAGE PIPING PART 1 - GENERAL 1.1 SUMMARY 1.2 SUBMITTALS 1.3 PROJECT CONDITIONS
SECTION 334100 - STORM UTILITY DRAINAGE PIPING PART 1 - GENERAL 1.1 SUMMARY Section Includes: 1. Pipe and fittings. 2. Drain Basin. 3. De-chlorination tablet feeder. 4. Non-pressure transition couplings.
More informationRoad Tunnel Fire Protection. with Alvenius Piping Systems
Road Tunnel Fire Protection with Alvenius Piping Systems EN 2 Alvenius piping systems where top safety is paramount Alvenius supplies reliable and safe steel piping for fire protection in road tunnels.
More informationLined Pipes and Fittings
EXCELLENCE IN CORROSION RESISTANCE Lined Pipes and Fittings ULTIMATE CORROSION RESISTANCE For 40 years, Engiplas has been operating in the field of engineering and production of Lined pipes and fittings.
More informationIndependent certification of your products & services. 2.2 Relevant Standards 1. SCOPE
1. SCOPE This schedule specifies requirements for the AquaSpira CSR (Composite Steel Reinforced) pipe system as manufactured by AquaSpira Limited. It is applicable for underground gravity drains, sewer
More informationAENOR Mark Specific Rules for polypropylene (PP) systems for hot and cold water installations
AENOR Mark Specific Rules for polypropylene (PP) systems for hot and cold water installations Note: This document is a translation of the Spanish document RP 01.16 rev 12 approved by the Plastics Technical
More informationThe future of pipe is Green Welcome!
The future of pipe is Green Welcome! Contents 1. Aquatherm A New Generation of Pipe 2. Pipe Generations 3. Demonstration 4. Fields of Application 5. Advantages and Characteristics 6. Questions? 2 Aquatherm
More informationProduct guide. TwinWall. Surface and Stormwater Drainage
Product guide Surface and Stormwater Drainage Contents Introduction 2-3 Product Details 4-12 Jointing 13 General Information 14-15 Notes 16 www.wavin.co.uk Email: technical.design@wavin.co.uk Surface and
More informationPOLSAFE. Gas Distribution System
POLSAFE Gas Distribution System PIPELIFE INTERNATIONAL Pipelife International GmbH is one of the world's leading suppliers of plastic piping systems. Plastic pipes and fittings are produced in 34 Pipelife
More informationRURAL PIPE PRODUCT CATALOGUE
RURAL PIPE PRODUCT CATALOGUE Issue: November 2017 www.watersandfarr.co.nz 0800 923 7473 ABOUT WATERS & FARR Established in 1954, Waters & Farr is a leading New Zealand manufacturer of high performance
More informationPIPE in PIPE instead of replacing existing pipes!
InsaTech.US PIPE in PIPE instead of replacing existing pipes! THE NEW INNOVATIVE Rehabilitation Technology CLEAN PIPES are environmental friendliness YOUR PARTNER FOR Rehabilitation Technology The InsaTech
More informationBuilding Preservation Material Technologies
INNOVATIVE GROUTING SOLUTIONS Seminario de la Beca: Dr. Ramon Carrasquillo, PhD, Reparaciones Estructurales: Soluciones Innovadoras PREPARED BY: JOSE R GAYA, P.E., M.ENG. Building Material Technologies
More informationInsert Fittings. For Use With Polyethylene Pipe. PRICE SCHEDULE INS Effective October 26, 2009 Supersedes INS
ount (s): 140 PVC & PP Insert Fittings 142 PVC Reinforced Insert Fittings 143 CPVC Insert Fittings Item prices may have changed from those shown in this sheet. See Spears On-line Catalog for most current
More informationIntroduction of LG PE-RT Material
Introduction of LG PE-RT Material LUCENE TM SP980 & SP988 PE-RT Characteristics PE-RT : Polyethylene of Raised Temperature Resistance - Excellent Physical & Good Thermal Properties - Ideal for Hot Water
More informationA. Product Data: For Piping, fittings, transition fittings and dielectric fittings.
SECTION 22 11 16 - DOMESTIC WATER PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationM I N I C O L D R O O M TECHNICAL SPECIFICATIONS
M I N I C O L D R O O M TECHNICAL SPECIFICATIONS Page.1 INTRODUCTION The Isark range, within the ColdKit range of cold rooms, was developed to combine: Aesthetics and quality Ease of transport and assembly
More informationfor potable water supply
UPONOR INFRASTRUCTURE Uponor System PVC Uponor System PVC for potable water supply Uponor System PVC 209 6.3 Uponor System PVC Characteristics The Uponor System PVC is designed for potable water distribution,
More informationHeating & sanitary BUILDING SOLUTIONS PIPE SYSTEMS. Environment is our challenge
Heating & sanitary Smooth-wall pipe corrugated pipe pipe-in-pipe injection-molded parts tools & accessories Environment is our challenge Our figurehead are perfect pipe systems Multi-layer Smoothwall pipes
More informationFundamental Course in Mechanical Processing of Materials. Exercises
Fundamental Course in Mechanical Processing of Materials Exercises 2017 3.2 Consider a material point subject to a plane stress state represented by the following stress tensor, Determine the principal
More information0.75 " transparent hose w/ valve for head measurements fixed to screws 20 MIL PVC liner. 6" gate valve
0.75 " transparent hose w/ valve for head measurements fixed to screws 250x1000 RC beam 6" gate valve Foundation preparation in accordance with technical specifications and as approved by engineer 25 cm
More informationTank Modifications & Accessories
Tank Modifications & Accessories Proven Customisation Techniques Providing solutions to custom tank requirements, Polymaster Industrial offers its experienced assistance in the application of integrated
More informationDraft for comments only Not to be cited as East African Standard
EAST AFRICAN STANDARD CD/K/094-3:2009 ICS 91.140.60; 23.040.45 Multilayer piping systems for hot and cold water installations inside buildings Part 3: Fittings EAST AFRICAN COMMUNITY EAC 2010 First Edition
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY CAST-IN-PLACE. Section CAST-IN-PLACE CONCRETE MANHOLES
PART 1 GENERAL 1.01 SUMMARY This Section includes: Section 02081 CAST-IN-PLACE A. Cast-in-place concrete manholes for sanitary sewers and storm sewers, including box sewers. B. Pile-supported concrete
More informationBATHROOM LINEAR AND POINT DRAINAGE INLETS
BATHROOM LINEAR AND POINT DRAINAGE INLETS MANUFACTURER OF MODERN BATHROOM DRAINAGE SYSTEM www.capricorn.pl DESIGN SELECT ONE OF GENUINE GRATE PATTERNS FUNCTIONALITY AND ELEGANCE OF AQUA AMBIENT DRAINAGE
More informationAS/NZS 4765:2017. Australian/New Zealand Standard. Modified PVC (PVC-M) pipes for pressure applications. Superseding AS/NZS 4765:2007 AS/NZS 4765:2017
AS/NZS 4765:2017 Australian/New Zealand Standard Modified PVC (PVC-M) pipes for pressure applications Superseding AS/NZS 4765:2007 AS/NZS 4765:2017 AS/NZS 4765:2017 This joint Australian/New Zealand standard
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationGrainDrain flexible drainage PE or PP 1
GrainDrain flexible drainage PE or PP 1 GrainDrain from GrainPlastics is produced from PE and/or PP in diameters Ø 25mm, 50mm, 60mm, 65mm, 80mm, 100mm, 125mm, 160mm and 200mm. Usage of PE- and PP pipesystems
More informationProduct Range Abrasion and corrosion resistant pumps
Product Range Abrasion and corrosion resistant pumps PP / PVDF / PE / PE-HD / PFA / PTFE AISI 1 / AISI 1 L / AISI 90 L / HASTELLOY Non-metallic normalized Non-metallic close coupled Stainless steel normalized
More informationProduct Range PP / PVDF / PE / PE-HD / PFA / PTFE AISI 316 / AISI 316 L / AISI 904 L / HASTELLOY
Product Range Abrasion and corrosion resistant pumps PP / PVDF / PE / PE-HD / PFA / PTFE AISI 1 / AISI 1 L / AISI 90 L / HASTELLOY NON-METALLIC NORMALIZED NON-METALLIC CLOSE COUPLED STAINLESS STEEL NORMALIZED
More informationPVC-U INDUSTRIAL FLUID HANDLING
INDUSTRIAL FLUID HANDLING Durapipe PVC-U for process chemicals and industrial fluid handling. Our PVC-U pipe and fittings provide excellent chemical resistance making it ideal for various industrial applications.
More information