Assembly Instruction. FLAMRO Variant N II A / N II KS
|
|
- Sheryl Singleton
- 6 years ago
- Views:
Transcription
1 Assembly Instruction / N II KS Please respect the permit specifications. All documents may be downloaded from It is assumed that - any damage to the seal will be repaired - the structural stability of the adjacent component is not compromised (including in the event of a fire) due to the installation of the seal - the ledge or the ceiling for the seal does not contain any additional vertical loading - the line fixings are attached to the adjacent component (and not on the seal) Assembly steps The fire protection collar must be installed on both sides of the wall and on the underside of ceilings. The smallest possible fitting collar for the pipe diameter is always selected The Fire Protection Collar The remaining openings in the wall or ceiling must The appropriate fire protection collar must be semay be wrapped around insulated or uninsulated be filled in with mortar or plaster so that there are lected. The internal diameter of the collar used pipes. no cavities. must be no more than 30 mm than the diameter of the individual tube. 5 All of the available fixing points must be used. 6 The collar must be fixed to the wall or ceiling using The seal must then be permanently labelled with approveddowels or to lightweight partition walls a sign. The identification plate must be attached using threaded rods. to the component next to the seal and may be obtained from FLAMRO info@flamro.com 1 of 9 4
2 Installation in walls (masonry, concrete, aerated concrete, lightweight partition wall) min. 100 or 300 mm wall thickness Installation in ceilings (masonry, concrete, aerated concrete) min. 150 or 300 mm ceiling thickness FLAMRO Variant N III A pipe collar Suitable insulation: PE acoustic insulation tube 5 mm or synthetic rubber 43 mm Combustible pipes up to max. Ø 400 mm Max. seal opening 400 mm (Ø) Extract from technical data (precise details see ETA) Max. Ø (mm) Inner Ø (mm) Outer Ø (mm) Installation heights Ø (mm) , Lugs (items.) of 9
3 Use on wall in accordance with ETA-13/0922 Installations (wall) Combustible pipe Max. Ø (mm) Fire resistance duration Wall thickness PVC-U 32 EI 120 (U/U) PVC-U 50 EI 120 (U/U) PVC-U 110 EI 120 (U/U) 2.2 PVC-U 32 EI 120 (U/C) PVC-U 50 EI 120 (U/C) PVC-U 110 EI 120 (U/C) PVC-U 160 EI 120 (U/C) PVC-U 32 EI 240 (U/C) PVC-U 50 EI 240 (U/C) PVC-U 110 EI 240 (U/C) PVC-U 160 EI 240 (U/C) PVC-U 200 EI 240 (U/C) PVC-U 180 EI 240 (U/C) PVC-U 200 EI 240 (U/C) PVC-U 32 EI 120 (U/C) PVC-U 50 EI 120 (U/C) PVC-U 110 EI 120 (U/C) PVC-U 160 EI 120 (U/C) PVC-U 200 EI 120 (U/C) PVC-U 220 EI 120 (U/C) 11.7 PVC-U 400 EI 120 (U/C) PE-HD 200 EI 120 (U/C) Intermediate pipe dimensions are also covered. See diagram for more detail information (Image 1 to 16) ETA-13/ of 9
4 PE-HD 200 EI 120 (U/C) PE-HD 220 EI 120 (U/C) 22.7 PE-HD 400 EI 120 (U/C) PP 32 EI 120 (U/C) PP 50 EI 120 (U/C) PP 110 EI 120 (U/C) PP 125 EI 120 (U/C) 14.6 PP 160 EI 120 (U/C) PP 32 EI 120 (U/C) PP 50 EI 120 (U/C) PP 110 EI 120 (U/C) PP 125 EI 120 (U/C) 14.6 PP 160 EI 120 (U/C) PP 200 EI 120 (U/C) CoolFit-Rohr 25 EI 120 (U/C) CoolFit-Rohr 32 EI 120 (U/C) CoolFit-Rohr 40 EI 120 (U/C) CoolFit-Rohr 50 EI 120 (U/C) CoolFit-Rohr 63 EI 120 (U/C) CoolFit-Rohr 75 EI 120 (U/C) CoolFit-Rohr 90 EI 120 (U/C) CoolFit-Rohr 110 EI 120 (U/C) CoolFit-Rohr 140 EI 120 (U/C) CoolFit-Rohr 160 EI 120 (U/C) CoolFit-Rohr 200 EI 90 (U/C) CoolFit-Rohr 225 EI 90 (U/C) Intermediate pipe dimensions are also covered. See diagram for more detail information (Image 1 to 16) ETA-13/0922 Specifications (wall) Min. wall thickness 100 mm (lightweight partition wall) or 100 mm or 300 mm (masonry, concrete or aerated concrete) Walls consisting of masonry, concrete or aerated concrete or lightweight partition wall with steel and wooden stands 400 mm (Ø) Collars Collar installation on both sides of wall, dim. in accordance with certificate 1. Support 470 mm 4 of 9
5 Use on floor in accordance with ETA-13/0922 Installations (floor) Combustible pipe Max. Ø (mm) Fire resistance duration Wall thickness (mm) PVC-U 32 EI 120 (U/C) PVC-U 50 EI 120 (U/C) PVC-U 110 EI 120 (U/C) PVC-U 160 EI 120 (U/C) PVC-U 200 EI 120 (U/C) PVC-U 32 EI 120 (U/C) PVC-U 50 EI 120 (U/C) PVC-U 110 EI 120 (U/C) PVC-U 160 EI 120 (U/C) PVC-U 200 EI 120 (U/C) PVC-U 220 EI 120 (U/C) 11.7 PVC-U 400 EI 120 (U/C) PE-HD 180 EI 120 (U/C) 18.2 PE-HD 200 EI 120 (U/C) PE-HD 200 EI 120 (U/C) PE-HD 220 EI 120 (U/C) 22.7 PE-HD 400 EI 120 (U/C) PP 32 EI 120 (U/C) PP 50 EI 120 (U/C) PP 110 EI 120 (U/C) PP 125 EI 120 (U/C) 14.6 PP 160 EI 120 (U/C) PP 200 EI 120 (U/C) PP 32 EI 120 (U/C) PP 50 EI 120 (U/C) PP 110 EI 120 (U/C) Intermediate pipe dimensions are also covered. See diagram for more detail information (Image 1 to 16) ETA-13/ of 9
6 PP 125 EI 120 (U/C) 14.6 PP 160 EI 120 (U/C) PP 200 EI 120 (U/C) PP 315 EI 120 (U/C) 7.7 CoolFit-Rohr 25 EI 120 (U/C) CoolFit-Rohr 32 EI 120 (U/C) CoolFit-Rohr 40 EI 120 (U/C) CoolFit-Rohr 50 EI 120 (U/C) CoolFit-Rohr 63 EI 120 (U/C) CoolFit-Rohr 75 EI 90 (U/C) CoolFit-Rohr 90 EI 90 (U/C) CoolFit-Rohr 110 EI 90 (U/C) 3.0-6,6 CoolFit-Rohr 140 EI 90 (U/C) CoolFit-Rohr 160 EI 90 (U/C) CoolFit-Rohr 200 EI 90 (U/C) CoolFit-Rohr 225 EI 120 (U/C) Intermediate pipe dimensions are also covered. See diagram for more detail information (Image 1 to 16) ETA-13/0922 Specifications (floor) Min. floor thickness Floors consisting of Collars 150 mm and. 300 mm masonry, concrete or aerated concrete Collar installation on underside of ceiling, dim. in accordance with certificate 6 of 9
7 FLAMRO Variant N II KS Approval No.: ETA - 13/0792 Installation in walls (masonry, concrete, aerated concrete, lightweight partition wall) min. 100 mm or 150 mm wall thickness Installation in ceilings (masonry, concrete, aerated concrete) min. 150 mm ceiling thickness Fire Protection Collar plaster or cement mortar Electric installation pipe (EIR) max. DN 63 mm, cables up to 21 mm. Max. seal opening 125 mm (Ø) Extract from technical data (precise details see ETA) Max. Ø (mm) Inner Ø (mm) Outer Ø (mm) Installation heights Ø (mm) ,6 26,6 40 Lugs (items.) of 9
8 FLAMRO Variant N II KS Approval No.: ETA - 13/0792 Use on wall in accordance with ETA-13/0792 Installations (wall) Combustible pipe DN Max. Ø (mm) Fire resistance duration PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Wall thickness (mm) Specifications (wall) Min. wall thickness 100 mm (lightweight partition wall) and 150 mm (masonry, concrete or aerated concrete) Walls consisting of masonry, concrete or aerated concrete or lightweight partition wall with steel and wooden stands 125 mm (Ø) Collars Collar installation on both sides of wall, dim. in accordance with certificate 1. Support 450 mm on both sides of wall 8 of 9
9 FLAMRO Variant N II KS Approval No.: ETA - 13/0792 Use on floor in accordance with ETA-13/0792 Installations (floor) Combustible pipe DN Max. Ø (mm) Fire resistance duration Wall thickness (mm) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) PVC DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Polyolefin DN EI 120 (U/C) Specifications (floor) Min. floor thickness 150 mm Floors consisting of masonry, concrete or aerated concrete 125 mm (Ø) Collars collar installation on underside of ceiling, dim. in accordance with certificate 1. Support 420 mm from top of floor construction 9 of 9
European Technical Assessment. ETA-11/0372 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationEuropean Technical Assessment ETA-16/0952 of 06/01/2017
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationEuropean Technical Assessment. ETA-16/0320 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationTechnical Assessment Body issuing the ETA and designated according to Article 29 of the Regulation (EU) No 305/2011: UL International (UK) Ltd
Member of www.eota.eu UL INTERNATIONAL (UK) LTD Wonersh House, Building C, The Guildway, Old Portsmouth Road, Guildford. GU3 1LR. United Kingdom. designated according to Article 29 of the Regulation (EU)
More informationgreenline fischer greenline
greenline fischer greenline The first range of fixing products with renewable resources. greenline The fixing assortment made with sustainable natural sources. Sustainable building With the introduction
More informationAssembly Instruction. FLAMRO KSL Combi seal according to ETA-16/0320. Content
Content Target audience, usage of assembly instruction, safety information Components Application field (Component strength, insulation strength and distances) Approved assignments and classifications
More informationTechnical Data Sheet. Astro HPE Sealant. UIC of product-type: AFHPE
Technical Data Sheet Astro HPE Sealant UIC of product-type: AFHPE Revision 2 - July 2016 Astroflame (Fireseals) LTD : Unit 8, I.O Centre Stephenson Road : Segensworth : Fareham : PO15 5RU Tel - 01329 844500
More informationFIRESTOPSYSTEMSCATALOGUE
Safety and Quality for over 30 Years! Proven in-house production! FIRESTOPSYSTEMSCATALOGUE FLAMRO For Your Safety! Structural Für den Baulichen Fire Protection Brandschutz... An Important Backbone of Intelligent
More informationTechnical Data Sheet. Hilti Firestop cable collar CFS-CC. European technical approval ETA N o 13 / Issue 10 / 2013
Technical Data Sheet Hilti Firestop cable collar CFS-CC Hilti Firestop cable collar CFS-CC European technical approval ETA N o 13 / 0704 Issue 10 / 2013 Hilti Firestop cable collar CFS-CC Issue 10 / 2013
More informationEuropean Technical Assessment ETA-17/0741 of 29/08/2017
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationSolid Hardwood Flooring. Underfloor heating Sport
Solid Hardwood Flooring Sport E 4.0 Fig. 1 General Information Sports Floor System Information These guidelines concern Junckers sports floor systems installed over underfloor heating. Please note that
More informationÖsterreichisches Institut für Bautechnik Schenkenstrasse Vienna Austria T F
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationFire Protection Valves
4/4/EN/6 Fire Protection Valves Type FV-K90 FVZ-K30 with German Test Certificate (General Building Approval) Z-41.3-317 Z-41.3-319 TROX GmbH Telephone +49/28 45/2 02-0 Telefax +49/28 45/202-265 Heinrich-Trox-Platz
More informationTehnical Data Sheet Astro HS FM Compound. UIC of product-type: HSFMC CPR-JA5013 ETA-14/0047. ETAG 026-Part 1 ETAG 026-Part 2
1121 Astroflame Fireseals Ltd Unit 8 The I O Centre 14 1121-CPR-JA5013 ETA-14/0047 ETAG 026-Part 1 ETAG 026-Part 2 FM Compound see ETA-14/0047 for relevant characteristics APPROVED CF613 EN13501-2 EN1366-3:2009
More informationAuthorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December 1988 on the
ÖSTERREICHISCHES I N S T I T U T F Ü R B A U T E C H N I K A-1010 Vienna, Schenkenstrasse 4 Tel.: + 4 3 ( 0 ) 1-5 3 3 6 5 5 0 Fax: + 4 3 ( 0 ) 1-5 3 3 6 4 2 3 relating to construction products E - m a
More informationPASSIVE FIRE PROTECTION PRODUCTS
OCTOBER 2016 PASSIVE FIRE PROTECTION PRODUCTS www.allproof.com CONTENTS FIRE TESTING 1 ADVANCED INTUMESCENT 2 ALLPROOF INTUMESCENT TECHNOLOGY: 2 LOW PROFILE S 3 CONCRETE SLAB TEST RESULTS: 4 FLOOR WASTE
More informationThis European technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationDRAINAGE GUTTERS FOR DRAIN ASPHALT 2012 TECHNICAL CATALOGUE
DRAINAGE GUTTERS FOR DRAIN ASPHALT 2012 TECHNICAL CATALOGUE TABLE OF CONTENTS Drainage gutters and drain bodies Chapter 01 Page - Installation diagram - Installation diagram - Drainage gutter (cast iron)
More informationFIREPRO FIRESTOP PIPE COLLARS. Firestop solution for plastic pipework penetrations
FIREPRO FIRESTOP PIPE COLLARS Firestop solution for plastic pipework penetrations FIREPRO FIRESTOP PIPE COLLARS Firestop solution for plastic pipework penetrations. ROCKWOOL Firestop Pipe s provide a simple
More informationwalraven.com BIS Pacifyre AWM III Fire Collar BIS Pacifyre IWM III Fire Strip
walraven.com BIS Pacifyre AWM III Fire Collar BIS Pacifyre IWM III Fire Strip Member of: BIS Pacifyre AWM III Fire Collar Product description Built-up fire collar for plastic (combustible) pipes and pipe
More informationDefinition of Wall. A continuous, vertical structure Thin relatively to its length and height
Walls & Partition Learning Objectives Briefly explain the functions & functional requirements of walls Differentiate and compare between load bearing and non-load bearing walls Briefly describe the characteristics,
More informationExternal Steel Stud and Top Hat Walls. Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185
Details SYSTEMS 176 NON-FIRE RATED SYSTEMS 176 FIRE RATED SYSTEMS 178 BRICK VENEER SYSTEMS 183 INSTALLATION 185 GENERAL REQUIREMENTS 185 FRAMING 185 PLASTERBOARD LAYOUT 189 PLASTERBOARD FIXING 190 EXTERIOR
More informationTECHNICAL INFORMATION SHEET NUMBER 1a
BASIC BUILDING REQUIREMENTS FOR THE CONSTRUCTION OF TRADITIONAL SQUASH COURTS Building Requirements The dimensions of a singles or doubles court is shown on the attached diagram. Width and length of the
More informationSECTION D Masonry Wall Systems. Contents. Introduction. Design Considerations. Installation. Components. System Specifications.
SECTION D Wall Systems. Contents. SUBJECT Introduction Design Considerations Installation Components PAGE D2 D2 D4 D5 System Specifications Stud One Side Stud Both Sides Stud and Furring Channel Resilient
More informationGypLyner. GypLyner. Metal framed wall lining system. All our systems are covered by SpecSure when using genuine Gyproc and Isover products.
GypLyner GypLyner Metal framed wall lining system All our systems are covered by SpecSure when using genuine Gyproc and Isover products Linings GypLyner GypLyner is a cost-effective, virtually independent
More informationInnovative Fire Protection Systems ETA CATALOG
Innovative Fire Protection Systems ETA CATALOG Overview / Introduction / Credentials / Certified safety / Approval overview / EOTA Member States 3-8 3 4 5 6 8 New applications and / firestop systems /
More informationSpecialists in Acoustic Flooring and House to Flat Conversions
Sound Solution Consultants Ltd Po Box 755 Capel St Mary Ipswich Suffolk IP9 2WF Tel No: 0845 5212096 Fax No: 0845 5212097 Email: mpconsultservice@aol.com Specialists in Acoustic Flooring and House to Flat
More informationInstallation Instructions
Installation Instructions SAVE THESE INSTRUCTIONS Please read this entire manual before you install and use your room heater. Failure to follow instructions may result in property damage, bodily injury,
More informationEuropean Technical ETA-04/0023 Assessment of 17 October 2017 General Part
European Technical Assessment ETA-04/0023 of 17 October 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationGypLyner UNIVERSAL Metal framed wall lining system
Metal framed wall lining system! This section includes updated information, added since it was first published in July 009. Please see the WHITE BOOK update document for details. Last updated 0/0/00 Cadbury
More informationBRE Global Assessment Report
BRE Global Assessment Report An assessment of the fire performance of Suresnap Fire Collars fitted around plastic pipes penetrating concrete floors against the adopted criteria of BS 476: Part 20: 1987
More informationInstallation in ceilings
Installation instructions EI90 BET Cable Boxes "System Wichmann" ceiling 350 mm depth, rectangular ETA 13/0902 BET Cable Box to be poured in the concrete» Technical datasheet - page 4-7 Installation in
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationBIS Pacifyre AWM II, AWM III & AWM Max Manchons Coupe-Feu
BIS Pacifyre AWM II, AWM III & AWM Max Manchons Coupe-Feu France Classification Report n 14318 E - Colliers coupe-feu pour la réalisation de l étanchéité au feu aux fumées des passages paroi (murs et plafonds)
More informationStaggered stud acoustic partition system
C0 Partitions Staggered stud acoustic partition system All our systems are covered by SpecSure when using genuine Gyproc and Isover products is a non-loadbearing stud partition incorporating a single framework
More informationABA Fashions Ltd. Plot #9, Block F, Tongi, Gazipur-1710 ( N, E) 08 MARCH 2014
ABA Fashions Ltd. Plot #9, Block F, Tongi, Gazipur-1710 (23.885176N, 90.399821E) 08 MARCH 2014 1 2 Observations 3 Highly stressed columns Cursory calculations indicate column at a high working stress.
More informationFIRE PROTECTION. GTEC Shaftwall systems 244 GTEC Shaftwall Stairwell systems 248 GTEC Horizontal Shaftwall systems 249 GTEC Encasement systems 250
FIRE PROTECTION GTEC Shaftwall range uses a specially designed system to protect voids and shafts in buildings. It resists pressure changes and enables installation from one side of the shaft only. GTEC
More informationSolutions for industrial pipe work insulation
Solutions for industrial pipe work insulation Technical Insulation November 2006 Prefabricated insulation components for superior pipe work insulation Pipes are a crucial component in industrial processes.
More informationGypLyner (walls) Metal framed wall lining system. GypLyner.
GypLyner GypLyner (walls) Metal framed wall lining system GypLyner is a cost-effective, virtually independent metal frame drylining system for lining walls. General purpose and suitable for all internal
More informationTehnical Data Sheet Astro Intu Mastic. UIC of product-type: INTUM CPR-JA5015
1121 Astroflame Fireseals Ltd Unit 8 The I O Centre 14 1121-CPR-JA5015 ETA-14/0049 ETA-14/0050 ETAG 026-Part 1 ETAG 026-Part 2 ETAG 026-Part 3 MASTIC see ETA-14/0049 & ETA- 14/0050 for relevant characteristics
More informationRECONSTRUCTION AND REPLACEMENT OF EARTHQUAKE DAMAGED MASONRY CHIMNEYS
INFORMATION BULLETIN / PUBLIC BUILDING CODE REFERENCE NO.: LABC 2113 and LARC R1001 DOCUMENT NO.: P/BC 2014-070 Previously Issued As: P/BC 2008-070 Effective: 01-01-2014 Revised: 01-16-2014 RECONSTRUCTION
More informationFireMaster FastWrap XL
Datasheet Code US: 7-14-36 MSDS Code US: 406 009 Morgan Thermal Ceramics, a business within the Morgan Ceramics Division of The Morgan Crucible Company plc * Commonly referred to test method CA Section
More informationfermacell AESTUVER Mixed / Cable Penetration Seal S
fermacell AESTUVER Mixed / Cable Penetration Seal S European technical approval Validity: to 25.08.2016 (System ZZ-Fire protection foam 2K NE) ÖSTERREICHISCHES I N S T I T U T F Ü R B A U T E C H N I K
More informationDe Montfort Mark 7 Incinerator (Flatpack)
De Montfort Mark 7 Incinerator (Flatpack) Introduction This design is specially for those occasions when a large number of incinerators are to be built at one location and transported to the places where
More informationThe Passive Fire Protection Handbook
The Passive Fire Protection Handbook The UK s comprehensive guide to passive fire protection Chapter Ceilings, Floors and Roofs AUGUST 0 The Passive Fire Protection Handbook Contents Chapter : Introduction
More informationDIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,
More informationGypLyner UNIVERSAL Metal framed wall lining system
Metal framed wall lining system Pizza Express, York 30 Metal framed wall lining system wall lining system is a cost-effective, virtually independent metal frame drylining. It is a general purpose system
More informationHilti Firestop Coating CFS-CT. Hilti AG Feldkircherstrasse Schaan Liechtenstein
SITAC Box 553 SE 371 23 Karlskrona SWEDEN MEMBER OF EOTA Tfn.: +46-(0)10-516 63 00 Fax: +46-(0)455-206 88 E-mail: info@sitac.se European Technical Approval ETA-11/0429 This ETA replaces the previous ETA
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB #
SECTION 26 0529 - HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationThis European technical approval
Authorised and notified according to Article 10 of the Council Directive 89/ 106/EEC of 21 December 1988 on the approximation of laws, regulations and administrative provisions of Member States relating
More informationInstallation instruction
Installation instruction Ci51 www.contura.eu 114 CERTIFICATE Declaration of performance according to Regulation (EU) 305/2011 No. Ci51-CPR-150821-SE-2 PRODUCT Product type Type designation Manufacturing
More informationProduct overview:
Product overview: The diagram gives an overview of the dimensions, and therefore the spectrum of structural performance, of the different types of Kielsteg elements. Structural performance: Thanks to their
More informationThe better way to build TM. Installation Manual FOUNDATION SIPs & FROST WALLS SIPs
The better way to build TM Installation Manual FOUNDATION SIPs & FROST WALLS SIPs November 2016 PWF FOUNDATION & FROST WALL SIPs Installation Manual Table of Contents Topics General Requirements....................................
More informationPyroscat Duct Wrap XL
Datasheet Code US: - 0 Thermal Ceramics is a business of Morgan Advanced Materials * Commonly referred to test method CA Section 00 is CDPH Standard Method for the Testing and Evaluation of Volatile Organic
More informationSECTION ACCORDION FOLDING PARTITIONS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 10 22 26.13 ACCORDION FOLDING PARTITIONS SPEC WRITER NOTE: Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationBIS Fire Protection Systems
walraven.com BIS Fire Protection Systems BIS Pacifyre EFC Endless Fire Collar BIS Pacifyre AWM III Fire Collar BIS Pacifyre IWM III Fire Strip Tangit FP 550 2C Fire Resistant Foam Wide range of sealing
More informationSTANDARD PLAN BULLETIN SP-2 (Structural)
STANDARD PLAN BULLETIN SP-2 (Structural) Date: January 20, 2000 This Los Angeles Department of Building and Safety (LADBS) standard plan provides prescriptive details to facilitate the reconstruction of
More informationProduct and installation manual. Wavin AS. Acoustic Soil System
Product and installation manual Acoustic Soil System Contents Introduction 2 Sound Insulation 3 Design and Installation 4 8 Wall Installation 4 Rainwater Down Pipes 4 How to Chamfer Pipe 4 Compensator
More informationInsulation in decks and bulkheads PYROLIQ sealing compound system
Insulation in decks and bulkheads PYROLIQ sealing compound system PYROLIQ casting compound In industry, ship construction and offshore areas, very high requirements are placed on cable and pipe penetrations
More informationSOUND INSULATION TESTING IN DWELLINGS
SOUND INSULATION TESTING IN DWELLINGS Chris Dilworth, AWN Consulting This Presentation Discusses the standards by which we judge sound insulation performance. Presents the results of sound insulation tests
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationSEPTEMBER construction type cavity barriers. SP Firestop Systems. The purpose-made solution for cavity fire stopping
SP Firestop Systems The purpose-made solution for cavity fire stopping SP Firestop Systems The purpose-made solution for cavity fire stopping As part of the comprehensive FIREPRO range of fire protection
More information1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases.
SECTION 260529 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Hangers and supports for electrical equipment and systems. 2. Construction requirements for concrete bases. 1.2
More informationEuropean Technical Assessment. ETA-12/0101 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (U) No 305/2011 Member of www.eota.eu
More informationInstallation instructions
Installation instructions Holetherm Double-walled flue gas discharge system (DW) 2016 All information in this release is subject to misprints. No liability is accepted for the consequences of misprints.
More informationCERTIFICATE OF APPROVAL No CF 816 BIP GMBH
CERTIFICATE OF APPROVAL No CF 816 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of St Peter Straβe 25 (Chemiepark
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationASSEMBLY INSTRUCTION.
INSTALLATION OF BUILT-IN BOX brickwork plastering sealing tape built-in box with flange height adjustment sealing tile adhesive tiles LED technology cover silicon joints aluminium profiles The built-in
More informationELECTRICAL SAFETY Information Bulletin
ELECTRICAL SAFETY Information Bulletin March 2014 CEC-12 [rev-6] Page 1 of 6 CANADIAN ELECTRICAL CODE SUBJECT: Section 12 Wiring Methods Conductors General Insulation Thickness on Conductors Used in Ungrounded
More informationWALL CEILING FACADE ACCESSORIES ACCESS PANELS CONTACT CLICK TO START
CLICK TO START About Knauf Metal Knauf Metal is part of the Knauf Group, leaders in lightweight construction materials, and a major supplier and manufacturer of metal building systems to the Australian
More informationSmoke Control Damper ESAM Instructions for installation, operation and maintenance 10/2014
Instructions for installation, operation and maintenance 0/204 General The rectangular smoke control damper ESAM is specially designed for use in multi fire-compartment applications as a closing or opening
More informationBATHROOM LINEAR AND POINT DRAINAGE INLETS
BATHROOM LINEAR AND POINT DRAINAGE INLETS MANUFACTURER OF MODERN BATHROOM DRAINAGE SYSTEM www.capricorn.pl DESIGN SELECT ONE OF GENUINE GRATE PATTERNS FUNCTIONALITY AND ELEGANCE OF AQUA AMBIENT DRAINAGE
More informationCERTIFICATE OF APPROVAL No CF 5363 NULLIFIRE LIMITED
CERTIFICATE OF APPROVAL No CF 5363 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Torrington Avenue,
More informationFireMaster FastWrap XL
Datasheet Code US: 7--6 MSDS Code US: 06 009 Morgan Thermal Ceramics, a business within the Morgan Ceramics Division of The Morgan Crucible Company plc Grease Duct Enclosure System Air Ventilation Duct
More informationSI T T FST
SI 440-600-700-700T-780-780T-900-1100 Freestanding TAPER TOP Open Fire - Wood Burner Installation Instructions Note: FLUE SYSTEMS Casing. Flue System may require to be Doubled Lined to Comply. Ref ASNZS:2918:2001
More informationJean Vaillancourt Fire Protection Specialist Hilti (Canada) Corp.
Cable Management Firestop Jean Vaillancourt Fire Protection Specialist Hilti (Canada) Corp. FIRESTOPPING KNOWLEDGE FOR BETTER SPECIFICATION AND DESIGN OF FIRE-RATED CONSTRUCTION Presentation Topics and
More informationSECTION SOUND ISOLATION
SECTION 13085 SOUND ISOLATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Resilient sound isolation clips installed with drywall furring channels for support of gypsum board for noise control (de-coupling)
More informationICC-ES Evaluation Report Reissued May 1, 2010 This report is subject to re-examination in two years.
ICC-ES Evaluation Report ESR-1255 Reissued May 1, 2010 This report is subject to re-examination in two years. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of work
More informationEXCEL Medical Waste - Equipment Installation Section SECTION GYPSUM BOARD
SECTION 09 29 00 GYPSUM BOARD PART 1 - GENERAL 1.1 DESCRIPTION This section specifies installation and finishing of gypsum board. 1.2 RELATED WORK A. Installation of steel framing members for walls, partitions,
More informationTW50. Insulation STANDARD DETAILS FOR 50 MM INSULATION BOARD IN A 100 MM CAVITY. Low Energy Low Carbon Buildings. Wall lining. Inner leaf blockwork
Insulation CI/SfB (21.9) Rn7 M2 First Issue May 2017 e with retaining clip TW50 STANDARD DETAILS FOR 50 MM INSULATION BOARD IN A 100 MM CAVITY 25 mm / 50 mm residual cavity Kingspan Thermawall TW50 Outer
More informationB. American Society for Testing and Materials: 1. ASTM F708 - Standard Practice for Design and Installation of Rigid Pipe Hangers.
SECTION 230529 - HANGERS AND SUPPORTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Sleeves. 6. Mechanical sleeve seals. 7. Firestopping
More informationFire Door Installation
FA LCON PANEL PRODUCTS LTD 14.1 It is vital that performance doorset are installed by competent tradesmen and It is strongly recommended that the installer is a member of a recognised quality assurance
More informationSECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
More informationEZ-PATH FIRE STOPPING DEVICES
EZ-PATH FIRE STOPPING DEVICES P O W E R E D B Y S P E C I A L I S T S UNDERSTANDING PASSIVE FIRE PROTECTION Passive fire protection, or containment, refers to products or methods which slow or prevent
More informationZukunftsbau GmbH, Strelitzer Str. 60, D Berlin The European qualification passport has been developed in cooperation with
QUALIFICATION PASSPORT 2 PREFACE Imprint Zukunftsbau GmbH, Strelitzer Str. 60, D 10115 Berlin euro@zukunftsbau.de The European qualification passport has been developed in cooperation with bfi (Austria),
More informationFEATURES APPLICATIONS. Technical data sheet SSW - STEEL STRONG-WALL FOR TIMBER FRAME RACKING RESISTANCE.
The Steel Strong-Wall is a corrugated steel panel which is designed to be fixed directly to the concrete foundations of a building, within the external or internal wall, via a bolted connection. FEATURES
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationControlled Environments
KS1100CS WALL AND CEILING PANEL SYSTEM CONSTRUCTION DETAILS Cover Page Controlled Environments CS PF 00 Sheet List Controlled Environments CS PF 01 NOTES: FOR INFORMATION ON KS1000 RW ROOF AND WALL PRODUCTS
More informationPEN SEAL. Pipe Penetration Seals
PEN SEAL Pipe Penetration Seals PROCO s Pipe Penetration Seals have been designed to assist in achieving an efficient, low-cost mechanical seal between any Electrical Conduit, Concrete, Cast Iron, Steel,
More informationXtratherm Thin-R Thermal Liner (XT/TL Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 4 Xtratherm Thin-R Thermal Liner (XT/TL Grade) PRODUCT DESCRIPTION: This Detail Sheet relates to Xtratherm Thin-R Thermal Liner, as defined in NSAI Agrément Certificate
More informationSECTION (Master Template Final-05) ELECTRICAL BOXES. A. Provide boxes for electrical equipment and wiring devices as follows:
SECTION 16130 (Master Template Final-05) ELECTRICAL BOXES PART 1 GENERAL 1.01 SECTION INCLUDES A. Provide boxes for electrical equipment and wiring devices as follows: 1. Wall and ceiling outlet boxes.
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
More informationGas Fireplaces. P36D-10 Gas Fireplace. Unit Dimensions With Vignette Faceplate. *** Important: Framing height requires consideration of the hearth
28-15/16 (735mm) Model P36D-NG10 P36D-LP10 Fuel Type Natural Gas Propane Gas Fireplaces Minimum Supply Pressure Manifold Pressure - High Manifold Pressure - Low 5 W.C. (1.25 kpa) 3.8 W.C. (0.95 kpa) 1.1
More informationSECTION PATHWAYS FOR COMMUNICATIONS SYSTEMS
SECTION 270528 PATHWAYS FOR COMMUNICATIONS SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Communications equipment coordination and installation. 2. Sleeves for pathways and cables. 3. Raceway
More informationLuka Quality Assurance Manual (Eng)
Luka Quality Assurance Manual (Eng) Contents: 1 General... 3 1.01 Foreword... 3 2. Quality assurance standards for air ducts... 4 A.1.00 Rectangular galvanised steel ducts... 4 A.2.00 Embedded galvanised
More informationC. Concrete Inertia Bases: Drawings showing required concrete steel reinforcing, construction details, and dimensions.
15240 VIBRATION ISOLATION ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 230548 An optional keynote
More informationTECHNICAL GUIDANCE XXXX 2015 EXXON QUESTION ANSWER. page 1 of 9
MARKINGWALLING OF SAFETY GLASS SPANDREL CURTAIN PANELS FORMED TO COLDFROM ROOFS STACKED WINDOW 7.2 /25 January ARRANGEMENTS (First Issue) XXXX EXXON QUESTION Which factors should be taken into account
More informationPart E robustdetails. robustdetails. January 2017 Update Pack. Dear Colleague,
Part E Pack Dear Colleague, This is the first 2017 update to the Part E Robust Details Handbook. In this update pack, we have focussed on clarifying the situation on incorporating underfloor heating (UFH)
More information