Products. Category Products Category Products. Valves(Brass/Ductile Iron All types of Pumps Flow Meter, BTU Meters. Fluid Control & Measurement
|
|
- Arron Jennings
- 6 years ago
- Views:
Transcription
1
2 Prolink Middle East FZE is head-quartered in the UAE with partner/group companies located across the middle east region. Prolink Middle East caters to the needs of the Building & Construction, Infrastructure Oil & Gas and Petrochemicals, Industries in the middle east region covering Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Oman, Bahrain and others. Prolink Middle East, offers electromechanical equipment, accessories, parts, supplies,engineered solutions and value added services in partnership with leading manufacturers from across of the world. With its team of qualified and experienced professionals, and customer focused approach, Prolink strives to exceed customer expectations and become the preferred choice for all its products and services in the region Products Prolink is proud to present the following products from leading manufacturers from around the world. All these products are manufactured as per the best engineering practices at world class manufacturing facilities. They conform to all relevant industry standards and certifications. Category Products Category Products Fluid Control & Measurement Valves(Brass/Ductile Iron All types of Pumps Flow Meter, BTU Meters Air Conditioning Equipment & Parts Plumbing Air Movement & Control Steel Pipes & Fittings Pipe Hangers,Clamps & Supports Grooved fittings Copper Pipes/Tubes & Fittings Plastic Pipes & Fittings Plumbing Accessories Fan Air Curtains VAV s Duct Heaters Building Materials Green Building Solutions Chillers, AHU s & FCU s Packaged Units Ducted/Duct Free Splits All OEM Spare Parts & Supplies Manhole Covers Gratings/Gulley Traps Catch Basins/Floor Drains Energy Optimization Studies Duct Sealants & Coatings Adhesives 1
3 OUR VISION To be become the best and the most preferred solution provider and supplier of electro mechanical equipment and plumbing products and services for the building and construction, infrastructure, oil & gas & petrochemical industries as perceived by our customers, suppliers, business partners and ourselves OUR MISSION We will supply high quality products complying with industry standards and as per customer requirements at competitive prices and shortest lead times for the building industry. We will provide competent technical support and reliable after sales service.we will provide innovative engineering solutions to reduce environmental impact reap cost savings and promote wellbeing of people in buildings 2
4 OUR CORE VALUES Ethics We will follow fair business practices and maintain complete trust worthiness with all stake holders Customer Focus We will have customer friendly approach and strive hard to exceed customer expectations Quality We will deal with quality products conforming to industry standards and continuously improve our products and business processes Performance Culture We will set challenging performance goals and will work towards exceeding them Innovation We will encourage, be receptive to new ideas and keep ourselves abreast of new technologies and developments Employee Wellbeing Employees are our biggest assets.we will constantly strive to ensure their happiness and well being 3
5 QUALITY POLICY We will provide innovative and value added engineering solutions and supply materials of high quality from reputed sources.we will ensure compliance to industry standards, meet customer requirements and adopt business processes which consistently guarantee zero defects in the products and services rendered. QUALITY OBJECTIVES LEADERSHIP: Personal commitment and involvement of management to reinforce core values and to achieve excellence in performance. CUSTOMER DRIVEN QUALITY: All Key business processes of the company designed and executed to deliver value to the customer to achieve customer preference, satisfaction, retention and market share gain. CONTINUOUS IMPROVEMENT: A well-executed approach to continuous improvement, both incremental and breakthrough in each area of the business based on a structured process of integrating employees ideas, customer feedback, market trends, and bench marking comparisons. EMPLOYEE DEVELOPMENT: Investment in work force development through education, training, providing opportunities to employees to learn and practice new skills and opportunities for continuing growth. Complete alignment of human resource management with business plans and strategic change initiatives. LONG-TERM OPERATION: Pursuance of market leadership through orientation to the future and long-term commitment to all stake holders: customers, employees, suppliers and partners, the public and the community. CORPORATE RESPONSIBILITY: Fulfillment of corporate responsibility towards business ethics, protection of public health, safety and the environment, both in company operations and in relation to products and services. RESULTS ORIENTATION: Performance indicators derived from business strategies, goals and customer requirements are used for monitoring performance and to achieve performance excellence 4
6 Fluid Control & Measurement Products 5
7 Valves-Bronze/Brass Gate, Globe & Check Valves Ball Valves & Y Strainers Bronze Gate Valve (Size :1/2-4 ) Bronze Ball Valve Size 1/2 2 ) Brass Gate Valve (Size :1/2-2 ) Bronze Ball Valve QT Size 1/2 1 ) Globe Valves & Foot Valves Y Strainers Bronze Globe Valve (Size :1/4-4 ) Brass Y Strainer (Size 1/2 2 ) Brass Foot Valve (Size :1/2-2 ) Bronze Y Strainer (Size 1/2 2 ) Check Valves PRV s & DRV s Brass Spring Check Valve (Size :1/4-4 ) Bronze Press Reducing Valve (Size :DN15-DN40) Lift Check Valve (Size :1/4-2 ) Bronze Double Regulating Valve (Size :DN15-DN50) 6
8 Valves-Ductile Iron Gate Valves Air Vents Gate Valves OS&Y (Size :12-12 ) Air Release Valve (Size : DN50 - DN200) Gate Valves NRS (Size :12-12 ) Pressure Reducing Valve (Size : DN50 DN400) Butterfly Valves Double Regulating Valves & Control Valves Butterfly Valves-Lever (Size :2-24 ) Double Regulating Valve (Size : DN65 DN300) Butterfly Valves-Gear (Size :2-24 ) Pressure Independence Control Valve (PICV) (Size : DN65 DN200) Butterfly Valves-Motorized (Size :2-24 ) Temperature Control Valves (Size :DN65 DN150) Check Valves Dual Plate Check Valve (Size : DN50 - DN600) Expansion Joints & Float Valve Expansion Joint (Size DN50 DN600) Non Slam Check Valve (Size : DN50 - DN250) Expansion Joint-Screwed (Size DN15 DN80) Y Strainers Swing Check Valve (Size : DN50 DN300) Triple Duty Valve Float Valves (Size DN50 DN400) Y Strainer (Size : DN50 DN400) Triple Duty Valve (Size : DN50 DN400) 7
9 Pumps Horizontal End Suction Pumps Heat Exchangers Horizontal Base Mounted End Suction Pumps Plate & Frame Exchangers Horizontal Close Coupled End Suction Pumps Shell & Tube Exchangers Vertical In Line Pumps Hydronic Accessories Vertical In Line Split Coupled Pumps Expansion Tanks Vertical In Line Close Coupled Pumps Air Separators Dual Arm Pumps Suction Guidles Horizontal Split Case Pumps Circulators Horizontal Split Case Pumps Circulators Booster Sets Integrated Fluid Management System Booster Sets Integrated Fluid Management Systems & Packages 8
10 BTU Meters & Flow Meters Ultrasonic BTU Meter Electromagnetic Water Flow Meter Ultrasonic BTU Meter Muti Jet Water Flow Meter Mechanical BTU Meter Turbine Type Water Flow Meter Mechanical BTU Meter Turbine Type Water Flow Meter Thermal Energy Calculator M-Bus Level Converter Thermal Energy Caclulator M-Bus Level Converter Module 9
11 Plumbing Products 10
12 Steel Pipes & Fittings Steel Pipes-ERW & Seamless Sizes Types Standards Thickness Rounds : 1/2-12 Squares : 19mmX19mm-250mmX250mm Rectangles : 40mmX20mm-380mmX145mm Sch 40,Sch 80, Extra Light, Light, Medium, Heavy ASTM A 53 Gr A & B,ASTM A 135 Gr A & B, ASTM A 795 Gr A & B API 5 L 45 th Edition, API 5 CT 9 th Edition AS 1074,AS 1163 EN10255,EN10219,EN39: mm to 12.7mm Lengths 4 metres to 16 metres Surface Finish Mill Finish, Light Oiled, Galvanized, Painted (Black,Red or Blue) Steel Pipe Fittings MI Steel Fittings ( Screwed Type) & MS Butt Weld Type Fittings Elbows, Bends, Equal Tee s, Reducer Tee s, Sockets, Unions, Nipples, Flanges, End Caps of all Sizes and Types Applications Chilled Water Systems Fire Protection Systems Oil & Gas Scaffolding 11
13 Copper Tubes, Pipes & Fittings Copper Tubes ACR Tubes/Pan Cake Coils ASTM B280 Sizes 1/4 upto 1 1/8 Lengths 50 ft,100ft Copper Tubes Copper Tubes ACR Pipes & Plumbing Pipes ASTM B280 & ASTM B88 Sizes 3/8 upto 4 1/8 Lengths 12 ft,50ft Type K,L and M Copper Fittings All Types and Sizes Plastic Pipes & Fittings Plastic Tubes All Sizes and Types Plastic Fittings All Sizes and Types 12
14 Pipe Hangers & Clamps Pipe Hangers Pipe Clamps Standard Clevis Hanger Standard Riser Clamp Felt Lined/ Plastic Coated Standard Clevis Hanger Felt Lined/Plastic Coated Standard Riser Clamp Adjustable 'J' Hanger Standard Pipe Clamp Felt Coated/Plastic Coated Adjustable 'J' Hanger Plastic Coated Standard Pipe Clamp Sprinkler Hanger Double Bolt Pipe Clamp Felt Lined/Plastic Coated Adjustable Band Hanger Pipe Clamp For Sway Bracing Trimline Adjustable Band Hanger Offset Pipe Clamp Felt Lined/Plastic Coated Trimline Adjustable Band Hanger Standard Pipe Strap Ring and Bolt Hanger Single Fastener CPVC Strap Extension Split Pipe Clamp Double Fastener Side Mounted CPVC Strap Hinged Extension Split Pipe Clamp Light Duty Offset Hanger & Restrainer for CPVC & IPS Pipe Offset 'J' Hook Channel Mount KWIK-CLIP 13
15 Pipe Supports & Accessories Pipe Rollers & Roller Supports Beam Clamps & Accessories Adjustable Steel Yoke Pipe Roll Steel C/Malleable Iron Clamps With Locknut Adjustable Roller Support Reversible Steel C-Clamp With Locknut Roller Chair Retaining Strap Roller Support Beam Clamp Pipe Rollers Adjustable Beam Clamp Pipe Rollers Steel Beam Clamp Pipe Guides & Saddles Side Beam Clamp Pipe Saddle Support With U-Bolt Trus Joist Beam Clamp Snap N Shield Clevis Welded Brackets Adjustable Pipe Saddle Support Upper Attachments Pipe Saddle With Strap Threaded accessories Pipe Alignment Guide U Bolts, Hanger Adjusters 14
16 Spring Hangers, Mounts & Anti-Vibration Products Spring Hangers & Mounts Anti-Vibration Pads,& Cushions Isolation Spring Hanger Ribbed Neoprene Pad Neoprene Hanger Cork and Ribbed Neoprene Pad Vibration Spring Hanger Metal Housing and Neoprene Combination Spring & Neoprene VibraClamp Spring Mount Inertia Base With External Brackets Housed Spring Mount Inertia Base With Recessedl Brackets Housed Spring Mount Recycled Rubber Roof Top Supports 15
17 Grooved Fittings Grooved Couplings Grooved Tee s & Crosses Angle-pad Coupling Size(1-12 ) Grooved Tee Size(2-12 ) HDPE Coupling Size(2-12 ) Bullhead Tee Size(3 X4-4 X6 ) Rigid/Flexible Couplings Size(1-12 )/Size(1-16 ) Threaded Reducing Tee Size(2 X1-5 X1 ½ ) Rigid /Flexible Couplings (Heavy-duty) Size(1 ¼ -8 )/ Size(2 ½ -8 ) Grooved Reducing Tee Size(8 X5-12 X10 ) Reducing Flexible Coupling Size(2 X1 ½ -8 X6 ) Grooved Cross Size(2-12 ) Grooved Elbows 90 Elbow Size(2-12 ) Grooved 45 Elbow Size(2 ½ -12 ) Grooved Mechanical Crosses Size(2 ½ X1-6 X1 ¼ ) Threaded Mechanical Crosses Size(6 X1 ½ -8 x4 ) U-Bolt Mechanical Tee Size(1 X ½ -3 x1 ) Grooved 22.5 Elbow Size(2-8 ) Grooved Flanges & Caps Grooved Elbow Size(2-8 ) Grooved Flanges PN16/ ANSI125/150 Size(2-14 )/Size(2-14 ) 90 Reducing Elbow Grooved/Threaded Reducers Size(5 X2 ½ -6 X5 ) /Size(2 X1-8 X4 ) Flange Adaptor PN16/ ANSI125/150 Size(2-12 )/Size(2-6 ) Grooved Cap / Cap with Eccentric Hole Size(1-12 )/Size(2 X1-8 X2 ) 16
18 Air Movement & Control Products 17
19 Fans & VAV s Centrifugal Fans Heat & Smoke Fans/Ventilators Roof Exhaust Fans Kitchen Upblast Fans Wall Mounted Fans Heat & Smoke Fans In Line Fans Ceiling Ventilator/ Gravity Ventilators Propeller & Axial Fans VAV s & Duct Heaters Wall Mounted Propeller Fans VAV s Axial Fans Duct Heaters 18
20 Air Conditioning Equipment & Parts 19
21 Air Conditioning Equipment & Parts Chillers & AHU s Packaged Units & Split Units Water Cooled Chillers Packaged Units Air Cooled Chillers Ducted Splits Ai Handling Units Mini Splits Compressors Parts & Supplies Screw compressors VAV s Reciprocating Compressors Motors 20
22 Building Materials 21
23 Manhole Covers & Gratings Manhole /Gully Trap Covers Gully Gratings Manhole Covers Ductile Iron /Cast Iron Low/Medium/Heavy Duty All Types, and Sizes as per BS EN 124/94 Gully Gratings Ductile Iron /Cast Iron Low/Medium/Heavy Duty All Types, and Sizes as per BS EN 124/94 Channel Gratings Channel Gratings Ductile Iron /Cast Iron Low/Medium/Heavy Duty All Types, and Sizes as per BS EN 124/94 Catch Basins & Floor Drains Catch Basins Catch Basins Floor Drains Floor Drains All Types 22
24 Green Building Solutions 23
25 Adhesives & Coatings Insulation Adhesives Water Based Insulation Adhesive Quick Tack,Antimicrobial,Non Inflammable Water based Insulation Adhesive for spray Insulation Coatings Water Based Insulation Coating Application by brush or spray Duct Sealant Water Based Duct Sealant For sealing duct joints and seams from inside of duct work Robotic Systems Cleaning Configuration Cleaning Robotic Systems Coating Configuration Coating Robot Systems 24
26 Prolink Advantage Engineering Solutions Technical Support Professional Approach Quality Products Conformance to Specifications Compliance to Industry Standards Competitive Prices On time Delivery After Sales Support Trust and Reliability PROLINK ENGINEERING SOLUTIONS & MATERIAL SUPPLIES PROLINK MIDDLE EAST FZE PO BOX 9368, SAIF Zone, Sharjah, United Arab Emirates Tel: ; Fax : Mobile : srinivasan.ganesan@prolinkme.com ; Web: 25
DIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
Page 220529-1 SECTION 220529 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of work
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT. A. ASME B31.1 (American Society of Mechanical Engineers) - Power Piping
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes pipe and equipment supports, hangers, anchors, bases sleeves and the sealing of
More informationA. Pipe Supports: ANSI B 31.1, Power Piping. B. Automatic Sprinkler Pipe Supports: Refer to Section
SECTION 15140 SUPPORTS, ANCHORS, AND SEALS PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract including General and Supplementary Conditions, Division 1 Specification
More informationB. American Society for Testing and Materials: 1. ASTM F708 - Standard Practice for Design and Installation of Rigid Pipe Hangers.
SECTION 230529 - HANGERS AND SUPPORTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Sleeves. 6. Mechanical sleeve seals. 7. Firestopping
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 23 0529 - MECHANICAL SUPPORTING DEVICES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationDaytona Beach Pier Building Renovation Jun 2010
SECTION 15060 - HANGERS AND SUPPORTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 22 0529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.
More informationCity of Winnipeg BASES, HANGERS AND SUPPORTS Section NEWPCC - Pump Well Isolation Page 1 of 6 Tender No June 2003
NEWPCC - Pump Well Isolation Page 1 of 6 PART 1 General 1.1 RELATED SECTIONS.1 Section 01001 General Requirements..2 Section 03300 - Cast-in-Place Concrete..3 Section 05121 - Structural Steel for Buildings..4
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
More informationNORTH HARRIS COUNTY REGIONAL WATER AUTHORITY PIPE HANGERS, Section PIPE HANGERS, SUPPORTS, AND RESTRAINTS
PART 1 GENERAL 1.01 SUMMARY Section 15140 PIPE HANGERS, This Section includes the furnishing and subsequent installation of: A. Pipe and equipment hangers, supports, and associated anchors B. Equipment
More informationOSU PROJECT NO PAGE 1 02 NOV 2006 SECTION SUPPORTS AND ANCHORS
OSU PROJECT NO. 30-04-15 PAGE 1 PART 1 GENERAL 1.1 WORK INCLUDED A. Supports and anchors for piping systems and equipment. 1.2 RELATED WORK SPECIFIED ELSEWHERE A. The provisions of Section 15050, Basic
More informationSECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 230529 - HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of Contract, including General Conditions and other Division 1 Specification Sections,
More informationSECTION HANGERS AND SUPPORTS PART 1 - GENERAL. A. Drawings and Division 1 Specification Sections, apply to this Section.
1.01 RELATED DOCUMENTS SECTION 15060 HANGERS AND SUPPORTS PART 1 - GENERAL A. Drawings and Division 1 Specification Sections, apply to this Section. 1.02 SUMMARY A. This Section includes hangers and supports
More information1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
More informationC. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationUNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 DEFINITIONS
More informationSECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
More informationTOLCO Fire Protection Support Systems. Pipe Hangers Supports Seismic Bracing. UL Listed FM Approved for Fire Sprinkler Installations
TOLCO Fire Protection Support Systems Pipe Hangers Supports Seismic Bracing UL Listed FM Approved for Fire Sprinkler Installations Revision 12/06/2007 Catalog Forward This catalog has been created with
More informationSECTION DRAINAGE AND VENT SYSTEMS CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 The design guidelines contained herein include the requirements for drainage and vent systems utilized at The University of Texas at Austin. It is the intention of this document to
More informationTerrain HDPE. Product Guide
TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other
More informationC. Concrete Inertia Bases: Drawings showing required concrete steel reinforcing, construction details, and dimensions.
15240 VIBRATION ISOLATION ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 230548 An optional keynote
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationA. Codes and Standards that are Standards at the University. A. Provide floor drains in all toilet rooms, janitor closets, and mechanical rooms.
PART 1: GENERAL 1.01 Purpose A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More informationUniversity of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 40 00_PLUMBING FIXTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5.
More informationA. Codes and Standards that are standard at the University. C. Coordinate cleanout locations with Architect.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationSECTION FACILITY STORM DRAINAGE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 22 14 00 Storm drainage systems, including piping and all necessary accessories as designated in this section. 1.2 RELATED WORK A. Penetrations in rated enclosures:
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationDARTMOUTH COLLEGE DESIGN September 15, 2004 &CONSTRUCTION GUIDELINES
PART 1 DESIGN DIRECTIVE 1.1 RELATED DOCUMENTS SECTION 15240 SEISMIC RESTRAINT AND VIBRATION CONTROL A. This section shall be considered as a part of each DC Standards, Part 15. 1.2 QUALITY ASSURANCE A.
More informationUniversity of Delaware
SECTION 22 05 01_COMMON REQUIREMENTS FOR PLUMBING SYSTEMS University Contact: Energy & Engineering Group (302) 831-1744 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pre-fabricated Pipe and Duct Supports
More informationDRAINS AND CLEANOUTS. 1. Division 7 - Thermal and Moisture Protection Piping (Plumbing).
SECTION 15421 DRAINS AND CLEANOUTS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. Division 7 - Thermal and Moisture Protection. 2. 15410 - Piping (Plumbing). 1.02 SUBMITTALS A. Product Data: Submit
More informationFLOOR AND AREA DRAINS
Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-13 48 00.00 10 (October 2007) ---------------------------------- Preparing Activity: USACE Superseding UFGS-13 48 00.00 10 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 22 05 29 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSTATE UNIVERPROGRAM DIRECTIVES
DIRECTIVE 15H-10 PIPING TYPES AND MATERIALS Issue date: September 2017 Steam & Condensate Piping Service & Location Pipe Size Pipe Material & Weight Joint Type Fitting Material Insulation Material Low
More informationAnvil CSI 3 Part MasterFormat Specifications:
November 2009 Anvil CSI 3 Part MasterFormat Specifications: 23 05 00 Basic Mechanical Methods and Materials 23 05 29 Hangers and Supports 21 11 00 for Fire Protection Systems 22 30 00 for Plumbing Systems
More informationEPIC B2134 J345 X721 1/2015
EPIC B2134 J345 X721 1/15 Ekoplastik System made from granulate of leading European producers unique 3 layer pipe reinforced with basalt fiber new materials of 4. generation PP-RCT high pressure and temperature
More informationDARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15420 DRAINAGE AND VENT SYSTEMS PART 1 DESIGN DIRECTIVES 1.1 DESIGN CRITERIA A. All cleanouts above finished (accessible and non-accessible) ceilings shall be extended to the floor above. B. Do
More informationSECTION NON-PENETRATING PORTABLE ROOFTOP SUPPORTS AND WALKWAYS. For best results, display hidden notes to specifier.
SECTION 15062 NON-PENETRATING PORTABLE ROOFTOP SUPPORTS AND WALKWAYS PART 1 GENERAL 1.1 SECTION INCLUDES For best results, display hidden notes to specifier. A. Portable, non-penetrating, rooftop support
More informationGrape St. Denver, CO
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 18 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless Steel(1/2 12 ) Adjustable Clevis Hanger 11GI 11GI ElectroGalv import (1/2 12
More informationSECTION ROOF ACCESSORIES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 07 72 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationSECTION VALVES, HANGERS, AND SPECIALTIES
SECTION 15515 VALVES, HANGERS, AND SPECIALTIES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15090 - Supports, Anchors, and Seals. 2. 15410 - Piping (Plumbing). 3. 15510 - Piping (HVAC). 4. 15540
More informationChapter 73. Articles of iron or steel
Chapter 73 Articles of iron or steel Notes. 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
More informationPOLYLOK / ZABEL PRODUCT BROCHURE v.3
POLYLOK / ZABEL PRODUCT BROCHURE v.3 Heavy Duty Trench Drain (Black, Grey, Green, Tan & Ductile ) 3, 4, 6, 8, 10 & 12 Black & Green Pipe s Flow Gate 12 Polylok & Pipe Adapter Ring x3 / Pan x2 & 24 x2 X-Chairs
More informationSEA Certified Piping Design Engineer
SEA Certified Piping Design Engineer Certification Course Course Title Eligibility Criteria : SEA CERTIFIED PIPING DESIGN ENGINEER : Mechanical Engineer, Chemical & Petroleum Engineer Duration of Course
More informationSECTION ALUMINUM GATES
P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,
More informationFORGED PRODUCTS & FLANGE FITTING PIPE TUBE PLATE AND OTHER MATERIALS
DOOLIM METAL CO. FORGED PRODUCTS & FLANGE FITTING PIPE TUBE PLATE AND OTHER MATERIALS 두림메탈 Doolim Metal Co. Dear Sirs, We sincerely thank you for your interest and consideration for our company. As a reliable
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationSECTION VIBRATION ISOLATION FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220550 - VIBRATION ISOLATION FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL REQUIREMENTS 1.1 SUMMARY A. It is the intent of this specification to provide vibration isolation supports for Plumbing
More informationUniversity of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 23 07 00_ HVAC INSULATION PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Piping system insulation. 2. Equipment insulation. 3.
More informationBox Rail. Single Box Rail Bracket
HANGERS & RAILS Box Rail Accordion Door Hangers Max. Door Weight (SWL) 450 lbs Meets ANSI/BHMA A156.14, Grade 1. Rail is carefully formed to give an even tread to hanger wheels. Packaging: Bundled without
More informationPART A : CPVC PIPES AND FITTNGS (EXTERNAL WATERSUPPLY):
PART A : CPVC PIPES AND FITTNGS (EXTERNAL WATERSUPPLY): 01 Providing and Fixing of CPVC pipes confirming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer
More informationSECTION COOLING TOWER
PART 1 GENERAL 1.1 SECTION INCLUDES A. Mechanical induced draft Cooling Tower B. Controls C. Ladder and handrails 1.2 REFERENCES SECTION 23 65 00 COOLING TOWER A. ANSI/AFBMA 9 - Load Rating and Fatigue
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More information1.04 SUBMITTALS PLUMBING FIXTURES
SECTION 15440 - PLUMBING FIXTURES PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationB B B B3104 CT B3104CT CT B3104CT B3100C AS B422 Right Angle Clamp
EMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 14 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
More informationEMPIRE ANVIL PHD BLINE 11 11B Plain Carbon Steel (1/2 24 ) 260 450 B3100 11G ElectroGalvanized (1/2 24 ) 11SS T304 Stainless (1/2 12 ) Adjustable Clevis 11GI 11GI ElectroGalvanized (1/2 12 ) 260 450 B3100
More informationOperating Instructions
Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper
More informationSECTION PLUMBING SUPPORTS AND ANCHORS. A. Furnish sleeves and hanger inserts to General Contractor for placement into formwork.
SECTION 22 05 29 PLUMBING SUPPORTS AND ANCHORS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Hangers, Supports, and Associated Anchors. B. Equipment Bases and Supports. C. Sleeves and Seals. D. Flashing and
More informationSECTION PLUMBING PIPING
SECTION 22 10 00 PLUMBING PIPING PART 1 GENERAL 1.1 SCOPE A. Work consists of all plumbing work indicated on drawings and specified herein. B. Included are requirements for fees/permits for installation
More informationSECTION COLD-FORMED METAL FRAMING
SECTION 05400 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work of this Section shall include all materials and installation necessary to provide all cold formed metal framing. B. This Section includes:
More informationMetal Roof Panels
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 074113 - Metal
More informationA.Z.E. SUPPLY COMPANY
PIPE * VALVES * FITTINGS COMMERCIAL * MARINE * MILITARY CAGE : OBGU9 CREDIT CARDS ACCEPTED FOR PURCHASE PIPE AND TUBING Carbon Steel A53, A106, A500, A512, A513 Stainless A312, A213, A269, GR.304, 304L,
More informationDevelopment of the Urban Water and Sanitation Sector in South Sudan (DUWSS) Bill of Quantities. for LOCATED AT PRIMARY & SECONDARY SCHOOL.
Development of the Urban Water and Sanitation Sector in South Sudan (DUWSS) Bill of Quantities for SIX CHAMBER VIP LATRINE FACILITY LOCATED AT PRIMARY & SECONDARY SCHOOL YEI RIVER COUNTY South Sudan JUN,
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationHAWLE-range of products
HAWLE-pRODucTS All OvER ThE world since 1948 HAWLE-range of products HAWLE subsidiaries HAWLE partners Illustrations, technical data, dimensions and weights are subject to alteration without notice. Edition
More information5. AMCA 301 Method of Publishing Sound Ratings for Air Moving Devices. 6. AMCA 500 Test Methods for Louver, Dampers, and Shutters
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS
SECTION 02620 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required to install High Density Polyethylene (HDPE) pressure pipe, fittings, and appurtenances
More informationStainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
More informationLet s move the medium! check valves / gate valves / strainers
Let s move the medium! check valves / gate valves / strainers BV 49 gate valve flange connections according PN10/16 and A-150 face to face dimension according DIN 3202 F4/F5, ANSI B16.10 easy to regulate
More informationE. Manufacturers Standardization Society of the Valve and Fittings Industry:
SECTION 230529 - HANGERS AND SUPPORTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment curbs. 6. Sleeves. 7. Mechanical
More informationSECTION FACILITY POTABLE WATER DISTIBUTION
PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 22 11 00 FACILITY POTABLE WATER DISTIBUTION A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification
More informationDesign and Construction Standards SECTION POTABLE WATER SYSTEMS
SECTION 15410 POTABLE WATER SYSTEMS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections,
More informationSECTION NON-STRUCTURAL METAL FRAMING
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationSTOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,
More informationSERVICE LINES, METERS AND APPURTENANCES
AUGUST02 SECTION 02646 SERVICE LINES, METERS AND APPURTENANCES PART 1 - GENERAL 1.1 DESCRIPTION A. This section concerns materials and installation of corporation stops, curb stops, service lines, meters,
More informationRead Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED
Chapter 17 Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.1.1 Applicability The regulations in this chapter apply to any private potable water supply system where plumbing fixtures are
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-10 22 13 (August 2016) --------------------------- Preparing Activity: NAVFAC Superseding UFGS-10 22 13 (August 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationSPECIFIC APPLICATION MODEL "IC" INTERSTITIAL COMBUSTIBLE CONCEALED SPACE UPRIGHT SPRINKLER GL5608
4077 Airpark Dr. Standish, MI 48658 989-846-4583 www.globesprinkler.com Technical Support 989-414-2600 techservice@globesprinkler.com SPECIFIC APPLICATION MODEL "IC" INTERSTITIAL COMBUSTIBLE CONCEALED
More informationSECTION CHAIN LINK FENCES AND GATES (PARK)
SECTION 02821 CHAIN LINK FENCES AND GATES (PARK) PART I GENERAL 1.1 SECTION INCLUDES A. Installation of chain link fences, and gate units provided by single source including erection accessories, fittings,
More informationSECTION PLUMBING PIPING SYSTEMS
SECTION 15300 PLUMBING PIPING SYSTEMS PART 1 - GENERAL 1.01 SPECIAL NOTICE A. Each contractor shall read all relevant documents, become familiar with the job, the scope of work, type of general construction,
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationSUGGESTED SPECIFICATIONS Pump Frames through 64132
TYPE HBB - HORIZONTAL SOLIDS-HANDLING WASTEWATER PUMPS Pump Frames 44081 through 64132 GENERAL Furnish and install Horizontal Flexible Coupled Dry Pit Pumping Units complete with all accessories and appurtenances
More informationSECTION PLUMBING FIXTURES
SECTION 15440 - PLUMBING FIXTURES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, are a part of this Section. 1.02 SUMMARY A.
More informationA. This Section includes sanitary waste and vent piping inside the building and to locations indicated.
SECTION 221316 SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationADDENDUM NO. 1. Mallory Valley Utility District Technical Specifications & Design Criteria for Water Supply & Distribution Facilities
ADDENDUM NO. TO Mallory Valley Utility District Technical Specifications & Design Criteria for Water Supply & Distribution Facilities Date of Addendum: December, 00 Hethcoat & Davis, Inc. 78 Franklin Road,
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1118 - DOMESTIC WATER DISTRIBUTION SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More information