The following excerpt are pages from the Firestop Systems Specifiers Guide U.S. Volume 14.

Transcription

1 The following excerpt are pages from the Firestop Systems Specifiers Guide U.S. Volume 14. Please refer to the publication in its entirety for complete details on this topic or system including data development, system specifications, general suitability, nomenclature, installation and application guidelines. US: To consult directly with a team member regarding our fire protection products, contact Hilti s team of support specialists between the hours of 6:00am 6:00pm CST. US: or USFirestopEng@hilti.com Hilti, Inc Dallas Parkway, Suite 1000 Plano, TX

2 Firestop Systems Application Review Application Metal pipes Plastic/glass pipes Cables/cable trays Insulated metal pipes Metal ducts Multiple penetrations Joints Page Description Features Benefits 16 Speed Sleeve (CP 653) High capacity, re-penetrable cable management device for electrical and telecom professionals 17 Sleeve Kit (CFS-SL SK) Medium capacity, economical solution for new cable penetrations requiring a sleeve Fast installation Low L-ratings Can be installed in wall and floor applications 100% visual fill (0% - partial - 100%) Buy American compliant device Fast installation Easy to install device encourages correct installation Cost effective alternative to rolling your own sleeves Easy penetration and re-penetration Withstands the rigors of usage and time Easy to inspect High capacity device encourages correct installation Kitted assembly saves you time and increases productivity Easily identifiable and easy to inspect (cables / cable trays) 18 Retrofit Sleeve Kit (CFS-SL RK) Medium capacity cable management device for pre-existing cable penetrations requiring a sleeve Oversized flanges cover irregular openings Integrated smoke seals eliminate need to add sealant around device Increased productivity Encourages correct installation(cables / cable trays) 19 Gangplate (CFS-SL GP) Pre-assembled solution for grouping cable management devices preor post-drywall installation Pre-assembled, rugged design Pre- or post-drywall installation Integrated smoke seals and firestop Mount multiple Gangplates in stacks or rows Time and labor savings No additional firestop sealant or joint compound required Ultimate cable management efficiency (cables / cable trays) 20 Cable Collar (CFS-CC) High capacity cable management device for new and pre-existing cable penetrations not requiring a sleeve Surface mounted, sealant free solution Covers max 4" diameter openings with up to 100% visual fill of cables No surface preparation required Fast, clean, simple solution increases productivity Virtually dust free installation Intuitive solution for problematic cable applications (cables / cable trays) 21 Firestop Drop-In Device (CFS-DID) One-step firestop solution for a variety of pipe materials and diameters Integrated moisture and smoke seal Quick and simple installation Efficient design is easy to install correctly Buy American compliant Easily identifiable to building inspectors Solution for renovation/ retrofit as well as new construction 22 Cast-In Firestop Device (CP 680-P) A one-step cast-in firestop device for a wide variety of pipe materials and diameters Quick and simple installation Integrated moisture and smoke seal Tested in concrete floor thicknesses from 2-1/2" (63 mm) Innovative adapter for metal deck applications Ready to use no additional caulk required Easy to specify, install and inspect Cost effective solution 10 Hilti, Inc. (U.S.) en español

3 Product Information Firestop Systems Application Review Cast-In Firestop Device (CP 680-M) Features Benefits Quick and simple installation Ready to use no additional caulk required Integrated moisture and smoke seal A one-step cast-in firestop device for a wide variety of non-combustible pipe materials and diameters Tested in concrete floor thicknesses from 2-1/2" (63 mm) Height Extension One standard kit adds 1" or 6" of height For use with CP 680-P/M Easy to specify, install and inspect Cost effective solution For use with CP 680-P/M For concrete floors over 8" Secures CP 680-P/M to metal deck prior to concrete pour Positive connection system promotes a secure fit to the base 24 Water Barrier Module Top Seal Plug For use with 2 inch CP 680-P/M 1/2" to 2" diameter pipes A unique firestop cast-in device for recessed tub drain applications Many tested details meeting UL s Class I W-Rating Restricts water from flowing through pipe penetrations A post-concrete casting water barrier solution Easy friction fit around pipes to create a water resistant seal Many tested details meeting UL s Class I W-Rating Closet Stub Cast-in device for toilet fixtures 3 fastening points instead of 4 Reduces sound transmission caused by vibrations No special tools required for installation Durable PVC construction (ASTM 2665) Economical, dependable solution for toilets Hilti, Inc. (U.S.) en español Joints Multiple penetrations Structurally stable during concrete pouring One system for all pipe materials, easy to choose and inspect Saves time and labor costs Special elastomeric bushing, no protective tape required Material can be attached to pipes via solvent welding or glue Reference Data 25 Triangular shape makes working around rebar easy coded for easier identification below deck Adds 1" to the overall height Assembles easily with solvent cement Fast, modular installation A pre-concrete casting water barrier solution Secures to top of device Joint Tub Box Kit (CP 681) Metal ducts coded for easier topside layout Available for 2", 3", 4" and 6" devices Centers pipe in the opening 25 Plastic/glass pipes Fast, modular installation Restricts water from flowing through cast-in device 24 Through-Penetration For use with CP 680P/M or CFS-DID Drop In Device Selector Guide Metal Deck Adapters Innovative adapter for metal deck applications Positive connection system promotes a secure fit 23 Applications and Products 23 Description Insulated metal pipes 22 Cables/cable trays Page Introduction Metal pipes Application 11

4 Firestop Systems Application Review Application Metal pipes Plastic/glass pipes Cables/cable trays Insulated metal pipes Metal ducts Multiple penetrations Joints Page Description Features Benefits 26 Shower and Floor Drain Cast-in device for firestopping shower and floor drains Material can be attached to pipes via solvent welding or glue 3" or 4" Aerator Adaptor connects the firestop device to the sovent Durable PVC construction (ASTM 2665) Economical, dependable solution for drains Less penetrations per floor 26 Aerator Adapter Used in combination with CP 680-P/M for firestopping aerator and sovent applications 27 FS-ONE High Performance Intumescent Firestop Sealant A water-based intumescent firestop sealant, designed to expand when exposed to heat 28 Firestop Silicone Sealant Gun Grade (CFS-S SIL GG) A single component silicone firestop sealant for joint and through penetration applications 29 Flexible Firestop Sealant (CP 606) An acrylic based firestop sealant for joint and through penetration applications Creates an underside void for the installation of a single stack waste pipe aerator system 3" fits hidden within a 3-1/2" stud assembly Up to a 4-1/2" recess created in the slab to reduce final ceiling height Protects most typical firestop penetration applications Water based Paintable Easy to work with and fast clean up Available in tubes, foil packs and buckets Silicone based formula 1/4" depth systems Available in foil pack (600 ml) Meets 500 cycle requirements in joint applications (ASTM E 1966 and UL 2079) Acrylic based formula Can be painted Available in foil pack (580 ml) Tested up to 33% movement with 500 cycles in accordance to UL 2079 and ASTM 1966 Creates a void in concrete that allows for simple and flexible installation Available for 3" and 4" castin place devices Less penetrations per floor One product to specify, purchase or inspect for most applications Low cost per penetration Quick and simple installation procedure Allows for movement and vibration Cost effective solutions Fast and easy dispensing Smoke, fume and water resistant Meets Class I W Rating requirements Fast and easy clean-up with water Allows for excellent finished appearance Fast and easy dispensing 30 Firestop Silicone Sealant Self-Leveling (CFS-S SIL SL) A self-leveling, singlecomponent, siliconebased firestop sealant for use with throughpenetrations as well as construction joints in floors 1/4" depth systems Excellent elongation/ compression properties Resistant to smoke, fumes and water Meets 500 cycle requirements (ASTM E 1966 and UL 2079) Smoke, fume and water resistant No tooling required Meets Class 1 W Rating requirements 12 Hilti, Inc. (U.S.) en español

5 u9+ 12oeoo Product Information Firestop Systems Application Review Application Page Description Features Benefits 31 Firestop Joint Spray Sprayable or apply by brush Contains no halogens, (CFS-SP WB) Paintable solvents or asbestos Water based formulation so spills and over-spray clean up quickly and easily A sprayable fire-rated mastic for construction joints where higher movement is expected 32 Speed Plugs (CP 777) Pre-cut flute configuration for top of wall firestopping 33 CP 620 Brandschutzbeschichtung sodfm,ev ijdjfiwhriuh. N owe 4i5kirdwiloi4jtf- x-.vbvbvh, ireiv Speed Strips (CP 767) Pre-cut mineral wool strips suitable for joint applications Fire Foam (CP 620) Innovative firestopping solution for complex and difficult to reach applications 34 Firestop Mortar (CP 637) A dry powder, when mixed with water forms a pourable, trowelable firestop mortar. Suitable for firestopping large openings. 35 Firestop Block (CFS-BL) An intumescent firestop block designed to properly firestop a variety of applications through medium-large openings. Ideal for electrical, telecom and mechanical penetrations 36 Firestop Board with Accessories (CP 675T) Ready to use Firestop Board designed for large openings with cable trays and multiple penetrations. Use with CFS-BL. Quick and easy installation with the Titan 600 or 1100 Sprayers Meets 500 cycle requirements Pre-cut Superior finish User friendly Virtually impervious to smoke Fully cures in approximately 1 minute Install in temperatures as low as 32 F High yield Paintable Quick setting forms can be removed in as little as 2 hours Superior working properties Use in horizontal or vertical applications No shrinkage during curing process Pre-cured, reusable solution Up to 12" annular space without requiring structural reinforcement Ideal for new penetrations or re-penetration One-sided wall systems available Easy installation in floors or walls. No special tools, no forming required. Lightweight design Variety of tested systems Time saving one person, one sided installation High installation flexibility and eases re-penetration from one side of the wall Hilti, Inc. (U.S.) en español Leaves no gaps or voids Smooth surface provides cost effective spray coverage No asbestos Inorganic will not mildew One solution for various applications Easy handling for difficult to reach applications Excellent mold resistance Meets Class I W Rating requirements Economical and simple to use Fast and easy clean-up Compressive strength up to 1784 psi ASTM G-21 mold and mildew resistant Easy to install, reuse and repenetrate Easy cut-to-fit around penetrating items Reduces need for extra labor, tools and parts Easiest solution for large openings with multiple penetrations Easy to install; can be cut without power tools Solutions for low and high penetrated openings Solutions for access impeded areas No dust. No fibers. No metal. No mess. Metal pipes Plastic/glass pipes Cables/cable trays Insulated metal pipes Metal ducts Multiple penetrations Joints 13 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

6 Firestop Systems Application Review Application Metal pipes Plastic/glass pipes Cables/cable trays Insulated metal pipes Metal ducts Multiple penetrations Joints Page Description Features Benefits 37 Firestop Putty Pad (CFS-P PA) A moldable putty pad designed to help protect electrical outlet boxes Three sizes for common outlet box applications 1 and 2 hour systems Tested for wood and steel studs Applied by hand. No tools required. Fits most common electrical boxes (refer to UL listings) Only one pad to stock and install Can be used for commercial and residential applications 38 Firestop Box Insert An intumescent insert designed for easy installation inside of outlet and switch boxes For use with: 2 x 4 4" x 4" 4-11/16" x 4-11/16" boxes Tested for wood and steel studs Item may be installed after the drywall has been hung Fits most common electrical boxes (refer to UL listings) Pre-formed, pre-cured material installs quickly with adhesive back 39 Firestop Putty Stick (CP 618) An intumescent, non hardening, firestop putty for cable and pipe penetrations 40 Firestop Plug (CFS-PL) Pre-cured, pre-formed intumescent firestop plug is ideal for cable penetrations and blank openings where the opening is less than 4" in diameter 41 Firestop Collar (CP 643N) A ready-to-use firestop collar designed for firestopping combustible pipes with a nominal diameter 1.5" - 6" Non-curing, reusable material No volatile solvents Flexible, moldable product Fast installation Easy to work with, adaptable design is ideal for a variety of applications Soft Flexible Design Reusable material Fast and easy installation. No special tools required. Immediately functional after installation Temporary or permanent protection One-sided systems available Ready-to-use out of package Adjustable mounting tabs Low profile for tight installations Quick and easy closure without the use of tools Reusable and easily repenetrated Approved for combustible penetrations (cables) along with conduit, EMT and steel pipe Fast and cost effective installation Provides temporary or permanent fire protection Reusable Easy to install correctly. Easy to inspect. Simple and quick installation Flexibility in positioning of collar Allows for correct installation in tight areas 42 Firestop Collar (CP 644) A ready-to-use firestop collar designed for firestopping combustible pipes with a nominal diameter of 8" and 10" Ready-to-use out of package Adjustable mounting tabs Quick and easy closure without the use of tools Simple and quick installation Flexibility in positioning of collar Allows for correct installation in tight areas 14 Hilti, Inc. (U.S.) en español

7 Firestop Systems Application Review Application Page Description Features Benefits 43 Firestop Wrap Strip (CP 648-S) An intumescent, flexible firestop single wrap strip for plastic pipe penetrations 44 ndschutzmansch. iwhriuh. N owe 4e 0288u27Āuze f- x-.vbvbvh, ireiv Firestop Wrap Strip (CP 648-E) An intumescent, flexible firestop wrap strip for plastic and insulated pipe penetrations 45 Smoke and Acoustic Sealant (CP 506) Flexible sealant for joints and through-penetration openings in non fire-rated acoustical assemblies and smoke partitions (Not for use in fire-rated applications) 46 Smoke and Acoustic Spray (CP 572) Flexible spray for construction joint openings in non fire-rated acoustical assemblies and smoke partitions (Not for use in fire-rated applications) Pre-measured no cutting required Integrated fastening tape No special tools required Ideal for very tight installations May be continuously wrapped Flexible Versatile Ideal for tight installations Fast and easy dispensing Low shrinkage after curing Excellent sound and air barrier characteristics Paintable Quick and easy spray application Can be applied at low temperatures High elasticity product Excellent sprayability and low slump characteristics Paintable Hilti, Inc. (U.S.) en español Easy installation User friendly Saves time and labor costs No need to measure each layer for multi-wrap applications Easy to use May be used inside the annular space or outside of the substrate Reduced labor and less operator fatigue Quality finished product appearance limits re-work Limits sound transmission and restricts smoke migration Saves time and reduces re-work Reduces down-time due to cold weather Good movement capabilities Cleaner, faster installation versus most competitive sprays Metal pipes Plastic/glass pipes Cables/cable trays Insulated metal pipes Metal ducts Multiple penetrations Joints 15 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

8 Speed Sleeve CP 653 Re-penetrable, high capacity cable management device for electrical and telecom professionals No expiration date alleviates shelf life concerns Fast installation Easy penetration and re-penetration Ability to re-penetrate from one side of the wall 100% visual fill capacity (0% - partial - 100%) Low L-ratings Withstands the rigors of usage and time Can be installed in wall and floor applications Buy American Compliant Cable and cable bundles For use with Concrete floor rated up to 3 hours Gypsum walls rated up to 4 hours Examples Electrical wiring Premise wiring Fire alarm and emergency cable Low voltage and datacom Technical Data CP 653 2" (50 mm) 4" (102 mm) OD (device only) 2.3" (60 mm) 4.3" (110 mm) OD (flange) 4.7" (120 mm) 6.7" (170 mm) ID 1.7" (48 mm) 3.6" (92 mm) Total length 12.4" (315 mm) 12.4" (315 mm) Recommended Hole Size 2.5" (63 mm) 4.5" (114 mm) Weight (device and flanges) 1.5 lbs 2.6 lbs Temperature resistance -22 F to 212 F (-6 C to 100 C) Intumescent activation Approx. 320 F (160 C) Expansion ratio (unrestricted) 1:40 Mold and Mildew (ASTM G-21) Metal Plastic Fabric Mold and mildew resistant Steel with zinc coating ABS Glass-fiber Approvals California State Fire Marshal - No :138 Tested in accordance with UL 1479 ASTM E 814 CAN/ULC-S115 UL 2043 ASTM G-21 FIRESTOP DEVICE 5N76 FM 16 Hilti, Inc. (U.S.) en español

9 Firestop Sleeve Kit CFS-SL SK The Sleeve Kit offers an economical and intuitive solution for properly firestopping new cable applications requiring a sleeve Offered in 2" and 4" diameter versions Standard Kit includes (1) sleeve (2) flanges (2) Firestop Plugs CFS-PL No expiration date alleviates shelf life concerns Fast, easy, intuitive installation for new cable runs Easy to install correctly Simple to inspect Re-penetrable for future cable capacity Pre-cured, pre-formed firestop material does not expire, eliminating shelf-life concerns Protects most typical firestop penetration applications 4" diameter device is compatible with the Hilti Gangplate CFS-SL GP Buy American compliant Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials Low VOC content and no CFCs or HCFCs Single and bundled cables in gypsum and CMU walls New cable applications with a sleeve Hilti, Inc. (U.S.) en español Technical Data CFS-SL SK 2" 4" OD (device only) 2.5" 4.5" OD (flange) 4.7" 6.7" ID (device only) 2.3" 4.3" Total length 10.5 in Expansion ratio (unrestricted) Approx. 1:3 Temperature resistance 5 F to 140 F (-15 C to 60 C) Intumescent activation Approx. 392 F (200 C) Surface burning characteristics (ASTM E 84-10b) Flame Spread: 10 Smoke Development: 15 Tested in accordance with ASTM E 814 CAN/ULC-S115 UL 1479 ASTM E 84 (CFS-PL only) FIRESTOP DEVICE 5N76 17 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

10 Retrofit Sleeve Kit CFS-SL RK Retrofit cable management device for easily firestopping existing cable applications Offered in 2" and 4" diameter versions Standard kit includes (1) retrofit sleeve (2) retrofit flanges with smoke seal (2) Firestop Plugs CFS-PL No expiration date alleviates shelf life concerns Fast and easy installation for existing cables with ability to re-penetrate Integrated smoke seal eliminates the need to add sealant behind the flange Oversized flanges for irregular and large openings Pre-cured, pre-formed firestop material does not expire, eliminating shelf-life concerns Protects most typical firestop cable applications 4" diameter device is compatible with the Hilti Gangplate (CFS-SL GP) Buy American compliant Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives Low VOC content and no CFCs or HCFCs Single and bundled cables in gypsum and CMU walls Examples Safely firestopping existing cable applications in fire rated walls, especially where future re-penetration is needed Technical Data CFS-SL RK 2" Device Sleeve: OD 2.5 in / ID 2.3 in Flange: OD 8 in 4" Device Sleeve: OD 4.5 in / ID 4.3 in Flange: OD 10 in Overall sleeve length 10.5 in Expansion ratio (unrestricted) Approx. 1:3 Temperature resistance 5 F to 140 F (-15 C to 60 C) Intumescent activation Approx. 392 F (200 C) Surface burning characteristics (ASTM E 84-10b) Flame Spread: 10 Smoke Development: 15 Tested in accordance with ASTM E 814 CAN/ULC-S115 UL 1479 ASTM E 84 (CFS-PL only) FIRESTOP DEVICE 5N76 18 Hilti, Inc. (U.S.) en español

11 Firestop Gangplate and Gangplate CAP CFS-SL GP and CFS-SL GP CAP Hilti Gangplate is a pre-assembled solution ideal for grouping 4" diameter Hilti Cable Management firestop devices Offered in 16" and 24" sizes for common stud construction One kit includes (2) plates. One for each side of the wall. No expiration date alleviates shelf life concerns Pre-assembled, ready-to-use out of the package for quick, simple installation. No assembly required. Integrated smoke seals eliminate the need for additional firestop sealant Easily stud-mount or surface mount for new and renovation construction projects 16" and 24" Gangplates for common stud construction Easily hang in stacks or rows for maximum productivity Accommodates all 4" diameter Hilti cable management devices Gangplate may be retrofitted for existing cable applications Gangplate CAP available for blank ports and future expansion Buy American compliant Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives Low VOC content and no CFCs or HCFCs Single and bundled cable applications Gypsum and CMU walls Renovation or new construction projects Hilti, Inc. (U.S.) en español Gangplate CAP 16" Gangplate Technical Data CFS-SL GP Dimensions: 16" Gangplate 16.4" x 8.3" x 1" Dimensions: 24" Gangplate 24.4" x 8.3" x 1" Weight: 16" Gangplate 3.3 lbs Weight: 24" Gangplate 5.5 lbs Tested in accordance with ASTM E 814 CAN/ULC-S115 UL " Gangplate FIRESTOP DEVICE 5N76 19 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

12 Firestop Cable Collar CFS-CC 4" Firestop Cable Collar is an easy to use cable management firestop solution covering max 4" openings in floors and walls Surface mounted, sealant free solution for new and pre-existing cable applications Economical and user-friendly solution for max 4" openings that are up to 100% visually filled with cables Does not require surface preparation in order to firestop. No cutting the floor or wall in order to retrofit a solution around preexisting cables No expiration date alleviates shelf life concerns Fast and easy firestop solution for a maximum 4" opening (sleeved or un-sleeved) Simple and intuitive firestop solution for openings that are 100% visually filled (max 4" diameter openings) Surface mounted, sealant free solution Solves problematic cable applications Re-penetrable for future cable capacity Pre-cured, pre-formed firestop material does not expire, eliminating shelf-life concerns Fast and easy topside solution for floors. No mineral wool, no sealant required. Immediately functional after installation Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials Low VOC content and no CFCs or HCFCs Single and bundled cables in floors and walls New and existing cable applications Membrane penetrations Technical Data CFS-CC 4" OD (device only) 6" Height 3" Red Density Approx g/cm 3 Application temperature 40 F to 104 F (5 C to 40 C) Temperature resistance 5 F to 140 F (-15 C to 60 C) Intumescent activation Approx. 392 F (200 C) Expansion ratio (unrestricted) Approx. 1:3 Surface burning characteristics (ASTM E 84-10b) Sound Transmission Classification (ASTM E 90-07) Flame Spread: 10 Smoke Development: 15 STC 59 (blank) STC 56 (cable bundle) Tested in accordance with ASTM E 814 ASTM E 90 CAN/ULC-S115 UL 1479 ASTM E 84 (based upon CFS-PL) FIRESTOP DEVICE SEE UL DIRECTORY OF PRODUCTS CERTIFIED FOR CANADA AND UL FIRE RESISTANCE DIRECTORY 5N76 20 Hilti, Inc. (U.S.) en español

13 Firestop Drop-In Device CFS-DID One step firestop solution for a variety of pipe materials and diameters Helps reduce labor costs and increase productivity Ready-to-use out of box No expiration date alleviates shelf life concerns Integrated moisture and smoke seal Simple, quick error free installation Top-side, sealant free firestop solution Easily identifiable to building inspectors All-in-one solution for renovation, retrofit, and new construction Buy American Compliant For use in concrete, hollow core, and metal deck slab thicknesses ranging from 2-1/2" to 12-1/2" For use in firestopping plastic, metal, and insulated pipes through cored or sleeved holes Installation complete with several fastening options including gas actuated fasteners, metal hit anchors, and kwik con screw anchor systems Hilti, Inc. (U.S.) en español Technical Data CFS-DID Expansion temperature ~ 356 F (~ 180 C) Expansion rate 1:15 load expansion, load = 5g/cm 3 1:40 free expansion Temperature resistance -4 up to 190 F (20 up to 88 C) Mold and Mildew (ASTM G-21) Mold and mildew resistant Storage temperature 23 up to 122 F (-5 up to 50 C) Tested in accordance with ASTM E814 CAN/ULC-S115 UL 1479 ASTM G-21 FIRESTOP DEVICE SEE UL FIRE RESISTANCE DIRECTORY 5N76 FM 21 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

14 Cast-In Firestop Devices CP 680-P/CP 680-M For use in Dust and fiber free environments such as hospitals, computer centers and laboratories Concrete floor assemblies rated up to 4 hours A one-step cast-in firestop sleeve for a variety of penetrating items Helps reduce labor costs and increase productivity Ready-to-use out of the package Internationally tested and approved by UL and FM Reduces the chance of project delays due to failed inspections No expiration date alleviates shelf life concerns Quick and simple installation Easy to align and install a faster layout Easy and simple vertical connections Integrated moisture and smoke seal Innovative adapter for metal deck applications Installation and applications Concrete floors (flat concrete or concrete over metal deck) from 2.5" (63 mm) thickness CP 680-M: - Metallic penetration (Insulated and non-insulated) - EMT and electrical conduits - Cable bundles - Multiple pipes CP 680-P: Addresses all applications for CP 680-M as well as the following: - Combustible pipes such as PVC, CPVC, ABS, ENT and FRPP - Fresh and waste water pipes Not suited for Wall applications CP 680-P in concrete over wood forms CP 680-M in concrete over wood forms Technical Data CP 680-P and CP 680-M ID Footprint Opening required thru metal deck 2" 3-3/4" x 4-1/2" 3-1/2" diameter 3" 4-3/4" x 5-5/8" 4-1/2" diameter 4" 6-3/8" x 6-3/4" 5-1/2" diameter 6" 9" x 9-1/2" 7-1/4" diameter Expansion temperature 392 F (200 C) Expansion rate 1:50 (unrestrained) 1:30 (Load expansion, Load = 20g/cm 3 ) Standard height 8" Temperature resistance Maximum 212 F (100 C) CP 680-P: red CP 680-M: black Mold and Mildew (ASTM G-21) Mold and mildew resistant Tested in accordance with UL 1479 ASTM E 814 ASTM G21 CAN/ULC-S115 UL 2043 Internationally tested and approved FIRESTOP DEVICE 5N76 CP 680-P over metal deck FM CP 680-M over metal deck Visit fbcsystemcompatible.com. FBC is a trademark of the Lubrizol Corporation. 22 Hilti, Inc. (U.S.) en español

15 Height Extension No expiration date alleviates shelf life concerns For use with concrete over 8" thick Each kit adds 1" or 6" of height Height Extensions can be cut to fit jobsite conditions QuickTurn Connection system promotes a fast, positive connection to the top of the appropriate cast-in device Red (CP 680-P) and Black (CP 680-M) versions for easier identification when both combustible and non-combustible penetrants are employed on the same project CP 680-P Kit Red cylinder with Red coupling band CP 680-M Kit Black cylinder with Red coupling band Metal Deck Adapters No expiration date alleviates shelf life concerns For use with concrete over metal deck applications Each adapter kit comes complete with one (1) extension tube and one (1) pair of metal wing clips 6" cylinder extension protrudes through even the thickest spray fireproofing QuickTurn Connection system promotes a fast, positive connection to the underside of the appropriate cast-in device Red (CP 680-P) and Black (CP 680-M) versions for easier identification when both combustible and non-combustible penetrants are employed on the same project Opening required to place the cylinder through a metal deck For 2" Devices 3-1/2" diameter For 3" Devices 4-1/2" diameter For 4" Devices 5-1/2" diameter For 6" Devices 7-1/4" diameter CP 680-P Kit Red cylinder with two (2) metal plates CP 680-M Kit Black cylinder with two (2) metal plates Hilti, Inc. (U.S.) en español Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

16 Water Barrier Module No expiration date alleviates shelf life concerns A pre-installed (cast-in) water barrier solution that impedes water Restricts water from flowing through cast-in device Meets W-Rating requirements for select penetrants For use where a single penetrant passes through a cast-in device QuickTurn Connection system promotes a fast, positive connection to the top of the appropriate cast-in device For use with CP 680-P/M or CFS-DID Dimension Adds 1 to all cast-in devices Available for 2", 3", 4" and 6" devices Red housing with black gasket Visit fbcsystemcompatible.com. FBC is a trademark of the Lubrizol Corporation. Top Seal Plug No expiration date alleviates shelf life concerns A post-pour water barrier solution that impedes water Easy friction fit around pipes to create a water resistant seal Meets W-Rating requirements for select penetrants For use where a single penetrant passes through a cast-in device Centers pipe within opening and helps reduce noise from vibrations Chemically stable elastomeric material will not react with combustible pipes Applications For single penetrants through a CP 680-P/M or a CFS-DID Iron Pipe Sizing (IPS) and Copper Pipe Sizing (CPS) offerings available For pipes ranging from nominal 0.5" to 2.0" in diameter Red Visit fbcsystemcompatible.com. FBC is a trademark of the Lubrizol Corporation. 24 Hilti, Inc. (U.S.) en español

17 Tub Box Kit CP 681 No expiration date alleviates shelf life concerns Structurally stable during concrete pouring Assembles easily with solvent cement no additional tools required Triangular shape makes working around rebar easy 3 fastening points instead of 4 reduces installation time Pre-cut to customer s height requirement upon request helps reduce labor costs One system for all pipe materials, easy to choose and inspect Accepts a pass through 1-1 2" pipe (with a sealing bushing) or a standard 2" P-trap (direct connection to the coupling) Special elastomeric bushing, no protective tape required Sealing bushings available for standard schedule 40 pipe or thin wall piping Versatile CP 681 tub box kit allows sealing bushing to be installed from top or bottom One system for all pipe materials, easy to choose and inspect Closet Stub No expiration date alleviates shelf life concerns Cast-in device for toilet fixtures Durable PVC construction (ASTM 2665) Material can be attached to PVC pipe via solvent welding or glue Available for 3" and 4" PVC applications Tested in accordance UL 1479 and ASTM E 814 Product dimensions (diameter x height) 3": 5-11/16" x 3-1/8" 4": 6-3/4" x 3-5/8" Application dimensions 3": 3-1/2" inner diameter (for use with 3" PVC pipe) 4": 4-1/2" inner diameter (for use with 4" PVC pipe) Minimum slab thickness 6" Red Hilti, Inc. (U.S.) en español Technical Data CP 681 Dimensions (LxWxH) 10-3/4" x 13" x slab thickness Application dimension Creates a 2-1/2" deep recess in the slab Minimum slab thickness 4-1/2" Intumescent activation Approx. 375 F (190 C) Expansion ratio (unrestricted) 1:10 Temperature resistance Maximum 212 F (100 C) Red with white PVC legs and coupling Storage Store in dry location Mold and Mildew (ASTM G-21) Mold and mildew resistant Approvals California State Fire Marshal - No :122 Tested in accordance with UL 1479 ASTM E 814 ASTM G21 FIRESTOP DEVICE 5N76 FIRESTOP DEVICE 5N76 25 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

18 Shower and Floor Drain No expiration date alleviates shelf life concerns An economical solution to address shower and floor drain applications Durable PVC construction (ASTM 2665) Two variations: (1) extended sleeve and (2) hub coupling Material can be attached to PVC pipe via solvent welding or glue 3" or 4" Aerator Adapter connects the firestop device to the solvent; less penetrations per floor Tested in accordance UL 1479 and ASTM E 814 Product dimensions Extended Sleeve: 5-3/4" base diameter 8" height Hub Coupling: 5-3/4" base diameter; 2-13/16" height Application dimensions Extended Sleeve: 2-3/8" inner diameter (for use with 2"PVC pipe) Hub Coupling: 2-3/8" inner diameter (for use with 2" PVC pipe) Minimum slab thickness 4-1/2" Extended Sleeve: red flange with white extended sleeve Hub Coupling: red flange with white hub coupling FIRESTOP DEVICE 5N76 Aerator Adapters No expiration date alleviates shelf life concerns When used in conjunction with the appropriate cast-in place device, creates an underside void for the installation of a single stack waste pipe aerator system 3" or 4" Aerator Adapter connects the firestop device to the sovent 3" device fits hidden within a 3-1/2" stud assembly Up to a 4-1/2" recess created in the slab to reduce final ceiling height Allows for vertical, horizontal and angle movement to simplify plumbing installations Excellent sound insulation For use with Soil and aerator assemblies and sovent applications Technical Data Aerator-Adapter Product dimensions (LxWxH) 3": 6" x 6-7/8" x 3" 4": 6" x 8-3/4" x 4-1/2" Void created 3": 5-3/4" x 2-3/8" (DxH) 4": 5-7/8" x 7.5" x 4-1/2" (LxWxH) Minimum slab thickness 4-1/2" Red Storage Store in dry location Mold and Mildew (ASTM G-21) Mold and mildew resistant Tested in accordance with UL 1479 ASTM E 814 ASTM G21 26 Hilti, Inc. (U.S.) en español

19 FS-ONE High Performance Intumescent Firestop Sealant Protects most typical firestop penetration applications Intumescent (expands when exposed to fire) firestop sealant that helps protect combustible and non-combustible penetrations for up to 4 hours fire rating Easy to work with and fast clean up Smoke, gas and water resistant after material has cured Water based material Paintable Contains no halogen, solvents or asbestos High fire rating properties Protects most typical firestop penetration applications Single component systems available Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Metallic pipes Insulated pipes Non-metallic pipes Cables and cable bundles Closed or vented plastic pipes HVAC penetrations For use with Concrete, masonry, drywall and wood floor assemblies Wall and floor assemblies rated up to 4 hours Examples Sealing around combustible pipe penetrations in fire rated construction Sealing around non-combustible penetrations in fire rated construction Hilti, Inc. (U.S.) en español FILL, VOID OR CAVITY MATERIAL 66Y7 Technical Data* FS-ONE Chemical basis Water-based intumescent acrylic dispersion Red Application temperature 40 F to 104 F (5 C to 40 C) Skin forming time Approx min. Curing time Approx. 2 mm / 3 days Average volume shrinkage 24% (ASTM C1241) Movement capability (ISO 11600) Approx. 5% Expansion rate (unrestricted) Up to 3-5 times original volume Temperature resistance (cured) 40 F to 212 F ( 40 C to 100 C) Mold and Mildew (ASTM G-21) Mold and mildew resistant Surface burning characteristics (ASTM E 84-96) Sound transmission classification (ASTM E 90-99) Flame Spread: 0 Smoke Development: 5 56 (Relates to specific construction) Tested in accordance with UL 1479 ASTM E 814 ASTM E 84 ASTM G-21 ASTM C1241 CAN/ULC-S115 *At 73 F (23 C) and 50% relative humidity FM Visit fbcsystemcompatible.com. FBC is a trademark of the Lubrizol Corporation. 27 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

20 Firestop Silicone Sealant Gun Grade CFS-S SIL GG A silicone based firestop sealant that provides maximum movement in fire-rated joints, and seals through-penetration applications Halogen and solvent free Asbestos free Simple to use and apply Good adhesion without use of a primer Smoke, fume, water and UV resistant Excellent movement capability, meets 500 cycle requirements (ASTM E 1966 and UL 2079) Meets Class I W-rating requirements Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Sealing construction/expansion joints Top-of-wall joints Metal pipes Cable bundles HVAC penetrations For use with Various base materials such as masonry, concrete, metal, glass, etc. Wall and floor assemblies rated up to 4 hours Examples Where a gypsum wall assembly meets the underside of a metal or concrete deck Sealing expansion joints to impede the passage of fire, smoke and toxic fumes Sealing around HVAC penetrations through fire-rated assemblies Technical Data* CFS-S SIL GG Chemical basis Neutral elastic silicone Density Approx. 1.4 g/cm 3 Available in red, white, and gray Application temperature 40 F to 104 F (5 C to 40 C) Skin-forming time Approx. 15 min. Curing time Approx. 2 mm / 3 days Volume shrinkage Approx. 0 5% Movement capability Approx. 33% Temperature resistance 40 F to 300 F ( 40 C to 149 C) Surface burning characteristics (ASTM E84-12) Sound transmission classification (ASTM E 90-09) Flame spread: 0 Smoke development: (Relates to specific construction) Tested in accordance with UL 2079 ASTM E 814 ASTM E 1966 ASTM C 920 UL 1479 ASTM E 84 ASTM G21 *At 73 F (23 C) and 50% relative humidity FILL, VOID OR CAVITY MATERIAL AND JOINT SYSTEMS 5BP5 FM Visit fbcsystemcompatible.com. FBC is a trademark of the Lubrizol Corporation. 28 Hilti, Inc. (U.S.) en español

21 Flexible Firestop Sealant CP 606 An acrylic based firestop sealant that provides movement capability in fire rated joints and seals through-penetrations applications Silicone free Halogen, asbestos and solvent free Paintable Tested up to 33% movement with 500 cycles in accordance to UL 2079 and ASTM 1966 Smoke and fume resistant Easy clean up with water Single component systems available Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Sealing construction/expansion joints Top-of-wall joints Metal pipes Cable bundles HVAC penetrations For use with Various base materials such as masonry, concrete, gypsum, etc. Wall and floor assemblies rated up to 3 hours Examples Where a gypsum wall assembly meets the underside of a metal or concrete deck Sealing expansion joints to impede the passage of fire, smoke and toxic fumes Sealing around HVAC penetrations through fire-rated assemblies Hilti, Inc. (U.S.) en español Technical Data* CP 606 Chemical basis Acrylic based firestop sealant Available in red, white and gray Application temperature 40 F to 104 F (5 C to 40 C) Skin-forming time Approx. 15 min Curing time Approx. 3 mm / 3 days Average volume shrinkage 22% (ASTM C1241) Movement capability Approx. 10% Temperature resistance 22 F to 176 F ( 30 C to 80 C) Surface burning characteristics (ASTM E 84-96) Sound transmission classification (ASTM E 90-99) Flame Spread: 10 Smoke Development: 0 56 (Relates to specific construction) Tested in accordance with UL 2079 ASTM E 814 ASTM E 1966 ASTM E 84 UL 1479 ASTM G21 *At 73 F (23 C) and 50% relative humidity FILL, VOID OR CAVITY MATERIAL AND JOINT SYSTEMS 66Y7 FM 29 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

22 Firestop Silicone Sealant Self-Leveling CFS-S SIL SL Self-leveling, single-component, silicone-based firestop sealant for use with through-penetrations as well as construction joints in floors. Self-leveling requires no tooling No asbestos Excellent elongation/compression properties Meets 500 cycle requirements (ASTM E 1966 and UL 2079) Smoke, fume, water and UV resistant properties Meets Class I W-rating requirements Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Sealing construction/expansion joints Metal pipes Cable bundles Sealing multiple penetrations in small or large openings For use with Concrete floors rated up to 4 hours Examples Penetrations for metal pipes between floor levels Construction joints and expansion joints in floors Technical Data* CFS-S SIL SL Chemical basis Neutral elastic silicone Density Approx. 1.4 g/cm 3 Gray Application temperature 40 F to 104 F (5 C to 40 C) Skin forming time Approx. 15 min Curing time Approx. 2 mm/3 days Volume shrinkage Approx. 0 5% Joint movement capability Approx. 20% Temperature resistance 40 F to 300 F ( 40 C to 149 C) Surface burning characteristics (ASTM E 84-12) Sound transmission classification (ASTM E 90-09) Flame Spread: 0 Smoke Development: (Relates to specific construction) Tested in accordance with UL 1479 ASTM E 1966 UL 2079 ASTM E 814 ASTM E 2307 ASTM E 84 ASTM G21 *At 73 F (23 C) and 50% relative humidity FILL, VOID OR CAVITY MATERIAL, JOINT SYSTEMS AND PERIMETER FIRE CONTAINMENT SYSTEMS SEE UL FIRE RESISTANCE DIRECTORY 5BP5 FM Visit fbcsystemcompatible.com. FBC is a trademark of the Lubrizol Corporation. 30 Hilti, Inc. (U.S.) en español

23 Firestop Joint Spray CFS-SP WB A sprayable fire-rated mastic for construction joints where maximum movement is required Sprayable or apply by brush Maximum flexibility, meets 500 cycle requirements (Class II and III Approval) (ASTM E 1966 and UL 2079) Quick and easy installation with the Hilti approved sprayers can help save you time and money Contains no halogens, solvents or asbestos Water based formulation so spills and over-spray clean up quickly and easily Paintable Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Top-of-wall joints Curtain wall/edge of slab Expansion joints For use with Concrete, masonry and gypsum wall assemblies Wall and floor/wall assemblies rated up to 4 hours Examples Where a gypsum wall assembly meets the underside of a metal or concrete deck Where a concrete floor assembly meets with non-rated exterior wall (concrete, glass, etc.) Where two concrete floor/wall assemblies meet Hilti, Inc. (U.S.) en español Technical Data* CFS-SP WB Density Approx lb/gal (1.3 g/cm 3 ) Available in red, white and gray** Application temperature 39 F to 104 F (4 C to 40 C) Temperature resistance -40 F to 176 F (-40 C to 80 C) Consistency Sprayable liquid Chemical basis Acrylic-water-based-dispersion Curing time Approx F, 50% humidity for 1/8" depth Average volume shrinkage 51.1% (ASTM C1241) Ph-value Approx. 8-9 Movement capability Up to 50% Surface burning characteristics (CAN/ULC-S102) Sound transmission classification (ASTM E 90-99) Flame spread: 15 Smoke development: (per tested construction type) Tested in accordance with UL 2079 ASTM E 1966 ASTM E 84 ASTM E 2837 UL 1479 ASTM E 814 ASTM E 2307 *At 73 F (23 C) and 50% relative humidity **Gray color requires approx. six (6) weeks lead time FILL, VOID OR CAVITY MATERIAL, AND/OR JOINT SYSTEMS, AND/OR PERIMETER FIRE CONTAINMENT SYSTEMS 66Y7 FM 31 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

24 Speed Strips CP 767 Speed Plugs CP 777 CP 777: Pre-formed mineral wool plugs for 1.5", 2" and 3" decks CP 767: Pre-formed mineral wool strips suitable for joint applications Pre-cut to industry standard size decking flutes Reduces material waste 3 sizes available Pre-cut leaves no gaps or voids Smooth surface provides cost effective spray coverage No asbestos/inorganic, will not mildew Up to 60% faster than castle cutting! Top-of-wall Tested and approved UL Classified when used in conjunction with CP 606 Flexible Firestop Sealant, CFS-S SIL GG Firestop Silicone Sealant Gun Grade, CP 672 Speed Spray, or CFS-SP WB Firestop Joint Spray Technical Data CP 767 and CP 777 Tested in accordance with UL 2079 ASTM E 1966 ASTM C G12 Type I-IUB FORMING MATERIAL FOR USE IN JOINT SYSTEMS 17RL Castle cutting Conventional mineral wool Hilti speed plugs Saves time and money! 50 MINUTES 35 MINUTES 20 MINUTES 60% Faster than castle cutting 40% Faster than conventional mineral wool *Based upon 40 linear feet of installation. Actual results may vary. 32 Hilti, Inc. (U.S.) en español

25 Fire Foam CP 620 CP 620 Brandschutzbeschichtung Innovative firestopping solution for complex and difficult to reach applications Up to 6 times expansion of can yield Ready to cut after approximately 60 seconds Ideal solution for difficult to reach applications Paintable Virtually impervious to smoke Mold and mildew resistant W-rated systems available Meets LEED requirements for indoor environmental quality credit 4.1 Low Emitting Materials, Sealants and Adhesives and 4.2 Paints and Coatings Sealing small to medium size openings Cables and cable trays Non-combustible pipes Combustible pipes when used in conjunction with Hilti Wrap Strips Where cables, steel, copper, cast iron or plastic pipes all pass through the same opening For use with floor and wall assemblies Concrete, concrete block and drywall Examples Multiple penetrations Insulated metal pipes Conduit banks sodfm,ev ijdjfiwhriuh. N owe 4i5kirdwiloi4jtf- x-.vbvbvh, ireiv u9+ 12oeoo Hilti, Inc. (U.S.) en español Technical Data* CP 620 Chemical basis Two component polyurethane Red Fire foam yield Up to 110 in 3 Application temperature Substrate: 32 F to 104 F (0 C to 40 C) Product: 50 F to 104 F (10 C to 40 C) Curing time* Non-tacky after Approx. 35 seconds Ready to cut after Approx. 1 minute Thermal insulation (R-value) per inch of thickness Temperature resistance of cured foam 22 F to 212 F ( 30 C to 100 C) Sound transmission classification 50 (Relates to specific construction) (ASTM E90-97) Structure-borne sound insulation Pipe/wall 30 50% Surface burning characteristics (ASTM E84-01) FILL, VOID OR CAVITY MATERIAL 66Y7 Flame spread: 0 Smoke development: 15 Tested in accordance with UL 1479 ASTM E 814 ASTM E 84 ASTM G21 *At 73 F (23 C) and 50% relative humidity FM 33 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

26 Firestop Mortar CP 637 Fire-resistant mortar suitable for firestopping large openings Quick-setting forms can be removed in as little as 2 hours Superior working properties Can be used in horizontal or vertical applications No shrinking during curing process Saves time Versatile Simple mixing Use in conjunction with CP 643 firestop collar for combustible pipe penetrations Use in conjunction with CP 653 Speed Sleeve for cable penetrations Sealing medium to large openings with pipes, cables, cable trays and duct work Permanent fire seal for blank openings For use with Concrete and masonry assemblies Walls and floors rated up to 4 hours Examples Medium to large openings containing multiple steel, conduit and EMT pipes Medium to large openings containing single or multiple ducts Medium to large openings containing single or multiple cable trays Blank openings and conduit banks Technical Data* CP 637 Light red Application temperature 40 F to 110 F (5 C to 43 C) Form removal Approx. 2 hours (depending on consistency) Density Approx pcf (dry) Expansion on setting (approx.) 0.08% Temperature resistance of cured mortar Compressive strength -22 F to 176 F (-30 C to 80 C) 24 hrs. after casting After full cure Pourable 508 psi (3.5 N/mm 2 ) 725 psi (5.0 N/mm 2 ) Plastic 696 psi (4.8 N/mm 2 ) 1200 psi (8.3 N/mm 2 ) Trowelable 870 psi (6.0 N/mm 2 ) 1784 psi (12.3 N/mm 2 ) Mold and mildew (ASTM G-21) Mold and mildew resistant Surface burning characteristics (ASTM E84-01) Yield (30 lb pail) Flame spread: 5 Smoke development: cubic inches depending on mix ratio Tested in accordance with ASTM E 814 UL 1479 ASTM E 84 ASTM G21 CAN/ULC-S115 *At 73 F (23 C) and 50% relative humidity FILL, VOID OR CAVITY MATERIAL 66Y7 34 Hilti, Inc. (U.S.) en español

27 Firestop Block CFS-BL Ready-to-use, flexible intumescent firestop block designed for medium to large sized openings No expiration date alleviates shelf life concerns Up to 12" annular space without requiring structural reinforcement Grid Tech technology for increased annular space Suitable for re-penetration or new penetrations Easy, one person installation and re-penetration No mess installation no special tools required Ideal for use in floors no forming required One sided systems available Halogen, asbestos and solvent free Operational immediately after installation Smoke resistant, non-curing, re-usable material Sealing single or multiple penetrations in small to large openings Temporary or permanent sealing of cables and cable tray penetrations Temporary or permanent sealing of insulated and non-insulated metallic pipes and combustible pipe penetrations For use with Walls (UL tested up to max. opening 72" x 36") Floors (UL tested up to max. opening 72" x 36") Concrete, porous concrete, masonry and gypsum wall assemblies Wall assemblies rated up to 4 hours Floor assemblies rated up to 3 hours Examples Completely dust and fiber free rooms and places where electrical installations are frequently used (ie: computer centers, hospitals, laboratories, etc.) New buildings in the construction phase and during renovation Large openings containing multiple penetrations as found in production bays, warehouses, hospitals etc. Areas of frequent re-penetration and planning for future capacity Hilti, Inc. (U.S.) en español Technical Data CFS-BL Density Approx g/cm 3 Red Application temperature 40 F to 104 F (5 C to 40 C) Temperature resistance 5 F to 140 F (-15 C to 60 C) Intumescent activation Approx. 392 F (200 C) Expansion ratio (unrestricted) Up to 1:3 Surface burning characteristics (ASTM E 84-10b) Sound transmission classification (ASTM E 90) FILL, VOID OR CAVITY MATERIALFOR USE IN THROUGH- PENETRATION 66Y7 Flame Spread Index: 10 Smoke Development Index: 15 STC Rating: 52 (Relates to specific construction) Approvals California State Fire Marshal - No :0143 Tested in accordance with UL 1479 ASTM E 814 ASTM E 84 FM NEW Grid-Tech! 35 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

28 Firestop Board CP 675T Ready to use Firestop Board designed for medium to large openings with cable trays and multiple penetrations No expiration date alleviates shelf life concerns Lightweight design Satisfies a wide range of application scenarios Allows for high flexibility and eases re-penetration/cable mining from one side of the wall Easy and fast cable re-penetration and cable mining with reduced labor and materials Labor saving one person, one sided installation method Polyurethane foam material, easy to cut without electric tools No dust, no fibers, no mess Same system for all types of wall materials May be used in conjunction with CFS-BL Firestop Block Temporary or permanent sealing of cables and cable tray penetrations Sealing single or multiple penetrations in large openings Temporary or permanent sealing of large blank openings For use with Concrete, concrete block, and gypsum wall assemblies Concrete floor assemblies Examples Locations where telecommunications and electrical applications are modified on a regular basis such as central office facilities, computer data centers, commercial buildings, healthcare facilities, and laboratories New buildings under construction and during renovation Technical Data Dimensions (LxWxH) CP 675T Red 26" x 39" x 1" (Large Board) (660 mm x 990 mm x 25 mm) 26" x 28" x 1" (Small Board) (660 mm x 711 mm x 25 mm) Density 320 kg/m 3 Application temperature -22 F to 176 F (-30 C to 80 C) Temperature resistance -22 F to 176 F (-30 C to 80 C) Surface burning characteristics (ASTM E 84-00) Mold and mildew (ASTM G-21) Flame Spread Index: 5 Smoke Development Index: 10 Mold and Mildew Resistant Approvals California State Fire Marshall - No :125 Tested in accordance with UL 1479 ASTM E 814 ASTM E 84 ASTM G21 CAN/ULC-S115 FIRESTOP DEVICE 5N76 FM 36 Hilti, Inc. (U.S.) en español

29 Firestop Putty Pad CFS-P PA A moldable firestop putty designed to help protect electrical outlet boxes No expiration date alleviates shelf life concerns No tools required A moldable firestop putty designed to help protect electrical outlet boxes Can be used for commercial and residential applications Acoustically rated drywall - sound transmission classification 59 according to ASTM E90-97 based on specific construction Quick and simple to install Applied by hand, no tools required No electrical conductivity Paper backing may be left on one side Protection of electrical outlet boxes Acoustically rated drywall Commercial and residential applications For use with Gypsum wall assemblies with wood or metal studs Examples Where two outlets are within a single stud/cavity or within 24" measured horizontally (not back to back unless specified by the specific UL approval) Hilti, Inc. (U.S.) en español Technical Data CFS-P PA Dimensions (LxWxH) 6 x 7 x 3/16 in 7-1/4 x 7-1/4 x 3/16 in 9-1/4 x 9-1/4 x 3/16 in Consistency Moldable putty Red Application temperature 40 F (5 C) to 95 F (35 C) Storage temperature 40 F (5 C) to 104 F (40 C) Curing time Non-curing Density 1.48 g/cm 3 Intumescent activation Approx. 220 F to 250 F (104 C to 121 C) Volatile solvents None Asbestos fibers None Surface burning characteristics (ASTM E 84-96) Sound transmission classification (ASTM E 90-97) Flame Spread: 15 Smoke development: (Relates to specific construction) Tested in accordance with UL 263 ASTM E 84 ASTM G21 WALL OPENING PROTECTIVE MATERIAL FIRE RESISTANCE CLASSIFICATION SEE PRODUCT CATEGORY IN UL FIRE RESISTANCE DIRECTORY 66Y7 FM 37 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

30 Firestop Box Insert An intumescent insert designed for easy installation inside of outlet and switch boxes to provide protection in fire-rated assemblies. No expiration date alleviates shelf life concerns Fast installation thru self adhesive back Applied by hand, no tools required Easy installation access from outside the wall Electrical outlet and switch boxes. For use with Gypsum wall assemblies with metal or wood studs In accordance with Hilti s (CLIV UL classification code ) approval, when the Firestop Box Insert are installed on boxes on both sides of a wall as directed, the horizontal separation between outlet boxes on opposite sides of the wall may be less than 24 in. provided that the boxes are not installed back to back. Examples Renovation projects applications, where only the interior of box is accessible. Technical Data Firestop Box Insert Dimensions 1 13/16" x 2-13/16" x 1/4" (for use with 2" x 4" boxes) 3-11/16" x 3-3/4" x 1/4" (for use with 4" x 4" boxes) 4-3/8" x 4-3/8" x 1/4" (for use with 4-11/16" x 4-11/16" boxes) Black Surface burning characteristics (ASTM E 84) Flame Spread: 5 Smoke development: 5 Tested in accordance with ASTM E 84 ASTM E 119 / UL 263 ASTM E 90 (Sound transmission classification 53*) * U411 Wall Assembly WALL OPENING PROTECTIVE MATERIAL FIRE RESISTANCE CLASSIFICATION SEE PRODUCT CATEGORY IN UL FIRE RESISTANCE DIRECTORY 66Y7 FM 38 Hilti, Inc. (U.S.) en español

31 Firestop Putty Stick CP 618 An intumescent, non-hardening, firestop putty for cable and pipe penetrations No expiration date alleviates shelf life concerns No tools required Easy to re-penetrate Reusable Easy to add or remove cables Fast installation Contains no volatile solvents or asbestos Single or bundled cables Non-combustible pipe Blank openings For use with Concrete, masonry and gypsum wall assemblies Wall and floor assemblies rated up to 3 hours Examples Where telecommunication and data lines penetrate gypsum wall assemblies Where steel conduit and EMT penetrate concrete and block wall assemblies Where blank openings exist in concrete and block wall assemblies For problematic and irregular openings For single cables and small cable bundles Hilti, Inc. (U.S.) en español Technical Data CP 618 Volume 18 in 3 Consistency Moldable putty Red Application temperature 40 F to 95 F (5 C to 35 C) Curing time Non-curing Density Approx g/cm 3 Surface burning characteristics (ASTM E84-96) Sound transmission classification (ASTM E 90-97) Flame Spread: 15 Smoke development: (Relates to specific construction) Approvals California State Fire Marshal - No :111 Tested in accordance with UL 1479 ASTM E 814 ASTM E 84 ASTM G21 CAN/ULC-S115 FILL, VOID OR CAVITY MATERIAL 66Y7 FM 39 Introduction Applications and Products Selector Guide Through-Penetration Joint Reference Data

32 Firestop Plug CFS-PL Ready-to-use, pre-formed, non curing and reusable intumescent plug for openings 4" in diameter and less No expiration date alleviates shelf life concerns Fast and easy installation no special tools required, helps reduce installation time and costs Immediately functional after installation Suitable for laying new cables later Versatile in use (temporary or permanent protection) Smoke resistant One-sided installation wall systems available Paintable Provides a very clean result Halogen and solvent free Walls and floors Temporary or permanent sealing of cables single or bundled cables Examples Dust and fiber free rooms and places where electrical installations are frequently changed such as computer centers, hospitals and laboratories New buildings in the construction phase and during renovation Office buildings, production bays, warehouses Technical Data CFS-PL Density Approx g/cm 3 Red Application temperature 40 F to 104 F (5 C to 40 C) Temperature resistance 5 F to 140 F (-15 C to 60 C) Intumescent activation Approx. 392 F (200 C) Expansion ratio (unrestricted) Approx. 1:3 Surface burning characteristics (ASTM E 84-10b) Sound Transmission Classification (ASTM E 90) Flame Spread Index: 10 Smoke Development Index: 15 STC Rating: 55 (Relates to specific construction) Approvals California State Fire Marshal - No :0142 Tested in accordance with UL 1479 ASTM E 814 ASTM E 84 ASTM E 90 CAN/ULC S115 FILL, VOID OR CAVITY MATERIALSFOR USE IN THROUGH-PENETRATION 66Y7 FM 40 Hilti, Inc. (U.S.) en español