residential rolling doors

Transcription

1 s Roll-A-Door Squareline Deluxe Traditional Wideline Squareline Wideline Traditional Low Profile Firmadoor Series 1 Maxi Rollmasta High Wind Doors Roll-A-Door Series 1 Roll-A-Door Series 2

2 R1D Squareline Deluxe size range Available in sizes from 1250mm to 3000mm in height and from 950mm to 3150mm in width. For wider openings we have the Wideline range. The Squareline Deluxe style is a steel rolling overhead garage door with square profile. It has a unique mini-groove top sheet which helps protect the door s paint finish and assists in consistent performance. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs. profile Nylofelt running strips ensure smooth, quiet, greaseless operation. Precision springing and castellated drum ensures consistent balance. Steel door stops, with buffers for added safety and quietness. Mini-groove top sheet - helps reduce chances of paint rub. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Waist height centre lift lock with double bar locking action for extra security. Sleek D shaped handle, conveniently located to assist you with opening and closing. Centre lift lock has a deep finger recess externally and turn knob internally for easier operation. When closed, curtain covers axle and springs on the inside of door, unlike some competitor s doors. The curtain separator gives more separation to avoid paint rub. Guide block and double roller for smooth, quiet operation. Springs designed to comply with requirements of Australian Standards - 20,000 cycles. MODEL MODEL CODE COIL THICKNESS MAX DOOR HEIGHT MAX DOOR WIDTH LOCKING DRUM type TAPER OPTION HIGH wind option Series 1 Deluxe R1D 0.4mm 3000mm 3150mm Centre lift lock S1 castellated pressed metal colours/finishes An extensive range of COLORBOND steel - a silicone modified polyester colour finish plus Zincalume. Timber Coat Limited Edition for Roll-A-Door - a patterned film which is applied to the Zincalume base material and captures the subtle woodgrain effect and toning of timber. Luxe Design Limited Edition for Roll-A-Door - the distinctive reflective surface of COLORBOND metallic steel draws on the environment and surrounding structure, enabling you to enhance your home design with subtle yet dramatic effects, endless nuances and dynamic changeable qualities. Refer to the colour selection chart for details. Timber Coat and Luxe Design Limited Edition colours available for a limited time. November 2016 SECTION 02/1

3 R1D Squareline Deluxe size of door perforations The perforations are at 300mm centres with the space between them 200mm constant. The only variable is the distance between the edge of the sheet and the first and last perforation. This varies from approximately 80mm minimum to approximately 220mm maximum. 300mm options Tapers - for garage floors that slope across the opening. Slots for ventilation. Removable mullions for wide openings. Alternative lock positions suitable for servery door. High wind option. MULLION calculations for two doors DIMENSIONS Overall width including guide section nominal - 120mm Effective width excluding guide section nominal - 70mm 20mm 100mm OpENING Size CALCULATIONS Where 75mm minimum side fixing is available. The width of the opening minus 20mm equals the sum of the two door widths, ie: 5000mm - 20mm = 4980mm 2 = 2490mm door width x 2. installation requirements Where 100mm side fixing is available. Because of the additional side room available the allowance of 20mm can be ignored, ie: 5000mm 2 = 2500mm door width x 2. INSTALLATION CLEARANCES Headroom (mm) Sideroom (mm) Heights Recommended Restricted E1 E2 (with opener) A B C D A C LH RH Up to to * All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap. Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Roll-A-Door doors, in normal residential and industrial/commercial use, are covered by a 7 year warranty for steel door curtain, covering steel cracking and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) COLORBOND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. November 2016 SECTION 02/2

4 R2W Traditional Wideline size range Available in sizes from 1250mm to 3000mm in height and from 2000mm to 5500mm in width. Nylofelt running strips ensure smooth, quiet, greaseless operation. Precision springing ensures consistent balance. Steel door stops. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Waist height centre lift lock with double bar locking action for extra security. The Traditional Wideline is a steel rolling overhead garage door for wide openings. It has a deeper, rounded curtain shape than the Squareline Wideline making it a stronger door with a more rigid steel curtain and heavy duty springs and drums for the lifting mechanism. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs. Choose the Traditional profile if your door is going to be used a lot more than usual, or if an extra strong door is needed. profile Sleek D handle for easier operation. Available up to 2400mm height. Thicker curtain material than Squareline Deluxe model (R1D). Heavy duty spring and drums for the lifting mechanism. When closed, curtain covers axle and springs on inside of door, unlike some competitor s doors. Guide block and double roller for smooth, quiet operation. Springs designed to comply with requirements of Australian Standards - 20,000 cycles. colours/finishes An extensive range of COLORBOND steel - a silicone modified polyester colour finish plus Zincalume. MODEL MODEL CODE COIL THICKNESS MAX DOOR HEIGHT MAX DOOR WIDTH LOCKING DRUM type TAPER OPTION HIGH wind option Series 2 Wideline R2W 0.5mm 3000mm 5500mm Centre lift lock S2 pressed metal Timber Coat Limited Edition for Roll-A-Door - a patterned film which is applied to the Zincalume base material and captures the subtle woodgrain effect and toning of timber. Luxe Design Limited Edition for Roll-A-Door - the distinctive reflective surface of COLORBOND metallic steel draws on the environment and surrounding structure, enabling you to enhance your home design with subtle yet dramatic effects, endless nuances and dynamic changeable qualities. Refer to the colour selection chart for details. Timber Coat and Luxe Design Limited Edition colours available for a limited time. November 2016 SECTION 02/3

5 R2W Traditional Wideline options Tapers - for garage floors that slope across the opening. Slots for ventilation. Alternative lock positions suitable for servery door. High wind option. size of door perforations The perforations are at 300mm centres with the space between them 200mm constant. The only variable is the distance between the edge of the sheet and the first and last perforation. This varies from approximately 80mm minimum to approximately 220mm maximum. 300mm installation requirements 20mm 100mm INSTALLATION CLEARANCES Headroom (mm) Sideroom (mm) Heights Recommended Restricted E1 E2 (with opener) A B C D A C LH RH Up to to * All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap. Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Roll-A-Door doors, in normal residential and industrial/commercial use, are covered by a 7 year warranty for steel door curtain, covering steel cracking and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) COLORBOND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. November 2016 SECTION 02/4

6 R3W Squareline Wideline size range Available in sizes from 1200mm to 3000mm in height and from 2000mm to 5500mm in width. The Squareline Wideline is a steel rolling overhead garage door designed for wide openings, with square profile. It has a curtain shape the same as the Squareline Deluxe single width door. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs. profile Nylofelt running strips and Roll-A-Guides ensure smooth, quiet, greaseless operation. Precision springing ensures consistent balance. Steel door stops. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Waist height centre lift lock with double bar locking action for extra security. Sleek D handle for easier operation. Available up to 2400mm height. Thicker curtain material than for Squareline Deluxe model (R1D). Centre lift lock has a deep finger recess externally and turn knob internally for easier operation. When closed, curtain covers axle and springs on inside of door, unlike some competitor s doors. Guide block and double roller for smooth, quiet operation. Springs designed to comply with requirements of Australian Standards - 20,000 cycles. MODEL MODEL CODE COIL THICKNESS MAX DOOR HEIGHT MAX DOOR WIDTH LOCKING DRUM type TAPER OPTION HIGH wind option Series 3 Wideline R3W 0.5mm 3000mm 5500mm Centre lift lock S3 pressed metal No colours/finishes An extensive range of COLORBOND steel - a silicone modified polyester colour finish plus Zincalume. Timber Coat Limited Edition for Roll-A-Door - a patterned film which is applied to the Zincalume base material and captures the subtle woodgrain effect and toning of timber. Luxe Design Limited Edition for Roll-A-Door - the distinctive reflective surface of COLORBOND metallic steel draws on the environment and surrounding structure, enabling you to enhance your home design with subtle yet dramatic effects, endless nuances and dynamic changeable qualities. Refer to the colour selection chart for details. Timber Coat and Luxe Design Limited Edition colours available for a limited time. November 2016 SECTION 02/5

7 R3W Squareline Wideline options Tapers - for garage floors that slope across the opening. Slots for ventilation. Alternative lock positions suitable for servery door. size of door perforations The perforations are at 300mm centres with the space between them 200mm constant. The only variable is the distance between the edge of the sheet and the first and last perforation. This varies from approximately 80mm minimum to approximately 220mm maximum. 300mm installation requirements 20mm 100mm INSTALLATION CLEARANCES Headroom (mm) Sideroom (mm) Heights Recommended Restricted E1 E2 (with opener) A B C D A C LH RH Up to to * All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap. Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Roll-A-Door doors, in normal residential and industrial/commercial use, are covered by a 7 year warranty for steel door curtain, covering steel cracking and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) COLORBOND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. November 2016 SECTION 02/6

8 R2L Traditional Low Profile size range Available in sizes from 1250mm to 2400mm in height and from 2000mm to 5500mm in width. Nylofelt running strips ensure smooth, quiet, greaseless operation. Precision springing ensures consistent balance. Steel door stops. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Waist height centre lift lock with double bar locking action for extra security. The Traditional Wideline is a steel rolling overhead garage door for wide openings. It has a deeper, rounded curtain shape than the Squareline Wideline making it a stronger door with a more rigid steel curtain and heavy duty springs and drums for the lifting mechanism. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs. Choose the Traditional profile if your door is going to be used a lot more than usual, or if an extra strong door is needed. profile Sleek D handle for easier operation. Available up to 2400mm height. Heavy duty spring and drums for the lifting mechanism. When closed, curtain covers axle and springs on inside of door, unlike some competitor s doors. Guide block and double roller for smooth, quiet operation. Springs designed to comply with requirements of Australian Standards - 20,000 cycles. colours/finishes An extensive range of COLORBOND steel - a silicone modified polyester colour finish plus Zincalume. MODEL MODEL CODE COIL THICKNESS MAX DOOR HEIGHT MAX DOOR WIDTH LOCKING DRUM type TAPER OPTION HIGH wind option Series 2L R2L 0.4mm 2400mm 5500mm Centre lift lock S3 pressed metal No Timber Coat Limited Edition for Roll-A-Door - a patterned film which is applied to the Zincalume base material and captures the subtle woodgrain effect and toning of timber. Luxe Design Limited Edition for Roll-A-Door - the distinctive reflective surface of COLORBOND metallic steel draws on the environment and surrounding structure, enabling you to enhance your home design with subtle yet dramatic effects, endless nuances and dynamic changeable qualities. Refer to the colour selection chart for details. Timber Coat and Luxe Design Limited Edition colours available for a limited time. November 2016 SECTION 02/7

9 R2L Traditional Low Profile options Tapers - for garage floors that slope across the opening. Slots for ventilation. Alternative lock positions suitable for servery door. High wind option. size of door perforations The perforations are at 300mm centres with the space between them 200mm constant. The only variable is the distance between the edge of the sheet and the first and last perforation. This varies from approximately 80mm minimum to approximately 220mm maximum. 300mm installation requirements 20mm 100mm INSTALLATION CLEARANCES Headroom (mm) Sideroom (mm) Heights Recommended Restricted E1 E2 (with opener) A B C D A C LH RH Up to to * All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap. Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Roll-A-Door doors, in normal residential and industrial/commercial use, are covered by a 7 year warranty for steel door curtain, covering steel cracking and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) COLORBOND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. November 2016 SECTION 02/8

10 R1F size range Available in sizes from 1200mm to 3000mm in height and from 950mm to 3150mm in width. Nylon woven running strips and guides ensure smooth, quiet, greaseless operation. Precision springing and steel drum ensures consistent balance. Steel door stops. Corrugations all the way to bottom of curtain. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Steel rolling overhead garage door with square profile. Waist height centre lift lock with double bar locking action for extra security. Springs designed for 15,000 cycles. Guide block and side roller for smooth operation. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs. profile MODEL Series 1 MODEL CODE R1F COIL THICKNESS 0.4mm MAX DOOR HEIGHT 3000mm MAX DOOR WIDTH 3150mm LOCKING Centre lift lock DRUM type Pressed metal TAPER OPTION HIGH wind option June 2016 SECTION 02/9

11 R1F colours/finishes AvAILAbLE in Extensive range of ColorboND colours plus Zincalume finish (see colour chart for details). options Tapers - for garage floors that slope across the opening. Removable mullion for wide openings. High wind option. installation requirements INSTALLATION CLEARANCES Headroom (mm) Sideroom (mm) Heights Recommended Restricted E1 E2 (with opener) A B C D A C LH RH Up to to * All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap. Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Firmadoor doors, in normal residential and industrial/commercial use, are covered by a 3 year pro rate warranty on steel door curtain covering steel cracking and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) ColoRboND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. June 2016 SECTION 02/10

12 R3F Maxi size range Available in sizes from 1200mm to 3000mm in height and from 2500mm to 5100mm in width. Nylon woven running strips and guides ensure smooth, quiet, greaseless operation. Precision springing and steel drum ensures consistent balance. Steel door stops. Corrugations all the way to bottom of curtain. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Steel rolling overhead garage door for wide openings, with square profile. Waist height centre lift lock with double bar locking action for extra security. Springs designed for 15,000 cycles. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then roll up around a drum above the opening, guided by tracks and counterbalanced with springs. profile MODEL MODEL CODE COIL THICKNESS MAX DOOR HEIGHT MAX DOOR WIDTH LOCKING DRUM type TAPER OPTION HIGH wind option Maxi R3F 0.4mm 3000mm 5100mm Centre lift lock S3 pressed metal No June 2016 SECTION 02/11

13 R3F Maxi colours/finishes AvAILAbLE in Extensive range of ColorboND colours plus Zincalume finish (see colour chart for details). options Tapers - for garage floors that slope across the opening. Counter lock for use in commercial applications. installation requirements INSTALLATION CLEARANCES Headroom (mm) Sideroom (mm) Heights Recommended Restricted E1 E2 (with opener) A B C D A C LH RH Up to to * All measurements are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap. Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Firmadoor doors, in normal residential and industrial/commercial use, are covered by a 3 year pro rate warranty on steel door curtain covering steel cracking and lock seam failure and associated labour, 12 months on surface coating, locking mechanism and all other components and all associated labour (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) ColoRboND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. June 2016 SECTION 02/12

14 R1R size range Available in sizes from 1200mm to 3000mm in height and from 950mm to 3150mm in width. Nylon woven running strips ensure smooth, quiet, greaseless operation. Engineering grade plastic drum for precise roll-up. Weatherseal with deep cushioning, helps restrict entry of water and leaves. Waist height centre lift lock with double bar locking action for extra security. Springs designed for 10,000 cycles. Steel rolling overhead garage door with square profile. Guide block and side roller for smooth operation. The rolling garage door is made up of a steel, ribbed curtain that moves vertically in the opening, then rolls up around a drum above the opening, guided by tracks and counterbalanced with springs. profile MODEL Series 1 MODEL CODE R1R COIL THICKNESS 0.4mm MAX DOOR HEIGHT 3000mm MAX DOOR WIDTH 3150mm LOCKING Centre lift lock DRUM type Plastic moulded drum TAPER OPTION HIGH wind option June 2016 SECTION 02/13

15 R1R colours/finishes AvAILAbLE in Extensive range of ColorboND colours plus Zincalume finish (see colour chart for details). Some colour surcharges apply. options Tapers - for garage floors that slope across the opening. External lock. Counter lock for use in commercial applications. High wind option. installation requirements Heights To 2100 Width INSTALLATION CLEARANCES Headroom (mm) 2101 to To 3150 All measurements 2401 to are in millimetres and are minimum unless otherwise shown. * Includes standard door overlap Sideroom (mm) Recommended Restricted E1 E2 (with opener) A B C D A B C D Recom. Restr. LH RH * Drawings are not to scale. NOTES / InfORMATION A) For areas within one kilometre of a corrosive environment eg. salt air or industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice. B) Rollmasta doors, in normal residential and industrial/commercial use, are covered by a 12 month warranty (excludes salt corrosion), conditional on proper care, as recommended in the door s handbook. Full details of the warranty are available from Warranty only applies to doors purchased and installed in Australia or New Zealand. Warranty only valid if warranty conditions are met. C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action. E) ColoRboND and Zincalume are registered trademarks of BlueScope Steel Limited. F) B&D products have many patents and registered designs applicable. G) While BlueScope Steel is our preferred supplier, steel products from other sources may also be used. H) Details correct at date of publication. Specifications subject to change without notice. June 2016 SECTION 02/14

16 Series 1 High Wind Doors R1D, R1F, R1r, R1M & R1ME windlock system S1 WINDLOCK CLIP CURTAIN S1 HIGH WIND GUIDE S1 WINDLOCK CLIP B&D Rolling Door products have been tested in accordance to the wind requirements of AS/NZS 4505:2012 (Garage Doors & Other Large Access Doors) which complies to AS/NZS :2011 (Wind actions) and AS 4055:2012 (Wind loads for housing). B&D Series 1 wind rating is an option for the standard rolling door described in this product manual. Our wind-locking technology incorporates a unique clip design fitted to the edge of every flat on our high wind rolling doors. When exposed to high wind situations, this clip design ensures the door is held captive in the door track, it reduces the risk of both blow-in and blow-out wind forces, and provides added protection against forced entry. maximum door widths Incorporates extruded aluminium guides. Guide size width total 90mm x 45mm Additional width doors and side room are required depending on the building structure. Check the drawing details in compliance section for this information. Door headroom remains as per the standard door headroom requirements. An additional 110mm minimum should be added to the opening width when calculating the door curtain width. Additional width may be required in some circumstances. Check the drawing details in compliance section for this information. Reference drawings - S01E, S02E, S03E REGION A B C TERRAIN (CATEGORY) UP TO 3.0m HIGH Clips at every flat m m m m m m m m m June 2016 SECTION 02/15

17 Series 2 High Wind Doors R2I, R2W windlock system S2 HIGH WIND GUIDE CURTAIN S2 WINDLOCK CLIP B&D Rolling Door products have been tested in accordance to the wind requirements of AS/NZS 4505:2012 (Garage Doors & Other Large Access Doors) which complies to AS/NZS :2011 (Wind actions) and AS 4055:2012 (Wind loads for housing). B&D Series 2 wind rating is an option for the standard rolling door described in this product manual. Our wind-locking technology incorporates a unique clip design fitted to the edge of every flat on our high wind rolling doors. When exposed to high wind situations, this clip design ensures the door is held captive in the door track, it reduces the risk of both blow-in and blow-out wind forces, and provides added protection against forced entry. Incorporates extruded aluminium guides. Guide size width total 120mm x 45mm Additional width doors and side room are required depending on the building structure. Check the drawing details in compliance section for this information. Additional width should be added to the opening width when calculating the door curtain width. Check the drawing details in compliance section for this information. Reference drawings - S04E, S05E, S06E, S07E, S08E maximum door widths REGION A B C D TERRAIN (CATEGORY) UP TO 5.1m HIGH Clips at every flat Clips at every second flat 2 5.5m 5.5m m 5.5m 3 5.5m 5.5m 2 5.5m 3.9m m 4.35m 3 5.5m 5.0m 2 5.5m N/A m N/A 2 3.0m N/A m N/A NOTE: 1. For wind regions A & B, internal pressure coefficients (Cpi) of -0.3 & +0.2 were adopted. 2. For wind regions C & D, internal pressure coefficients (Cpi) of -0.3 & +0.6 were adopted. June 2016 SECTION 02/16