Perfect technology with design. Hoesch Sectional door elements

Transcription

1 Perfect technology with design Hoesch Sectional door elements

2 hoesch sectional door elements content 2 for more than three decades, thyssenkrupp Bausysteme has been one of the market leaders in cutting-edge building products made from steel with colour-coated surfaces for roofs, walls, ceilings and door elements for building construction. we use our expertise to produce and sell patented high-quality sectional door elements with or without fi nger trap protection for industrial and garage doors. Hoesch Sectiotec plus (with finger trap protection) Hoesch Sectiotec technical features /5 surfaces and textures /7 colours /9 technical features /13 surfaces and textures /15 colours 16/17 cassette pattern /11 Hoesch sectional door elements information on colours and coatings /19

3 3 hoesch sectiotec plus ( with fi nger trap protection) technical features hoesch sectiotec plus hoesch sectiotec coating systems special features of Hoesch Sectiotec plus : good corrosion protection by a Zm ecoprotect coating (for more information, see page 18) best thermal insulation properties high load bearing capacity high degree of prefabrication diffusion-tight cover sheets large colour scheme elements available in up to four different heights sandwich element with a long service life and excellent processing properties for different types of doors outer sheets available with various roll formed fi nishes special design of the cover sheets in the tongue and groove area allowing safe fastening of the hinges without an additional foamed reinforcement Patented with finger trap protection element hoesch sectiotec plus * on request element thickness element height material thickness outer sheet inner sheet max. length supplied weightthermal resistance heat transfer coeffi cient thermal resistance heat transfer coeffi cient in accordance with din en iso 6946 with joint impact as detailed in test report P7-242/2004 r U r d U mm mm mm mm m kg/m 2 m 2 K/w w/m 2 K m 2 K/w w/m 2 K * to element thickness 39.5 mm all data without engagement. all information provided here is for guidance only.

4 4 Hoesch Sectiotec plus Wind load applied to doors on the outside of a building as per EN Span Door element Door element Door element Door element without window and without window and without window and with 3 windows and without reinforcing strips with small reinforcing strips with large reinforcing strips without reinforcing strips m 2.5 Class 5 Class Class Class 3 Class Class Class Class 3 Air permeability as per EN Span Door element without reinforcing strips m 2.5 Class Class Class 3 4 Class 4 Span Heat transfer coefficient as per EN Door element without window U value Door element with windows U value m W/m 2 K W/m 2 K Classification Class 1 Class 2 Class 3 Class 4 Class 5 Load including a 25 % safety factor 300 Pa 450 Pa 700 Pa 1000 Pa > 1000 Pa Resistance against penetrating water as per EN Span Door element without reinforcing strips m 4.0 Class 3 Hinge design for Hoesch Sectiotec plus: For Hoesch Sectiotec plus we have developed a perfect solution relating to the pull-out strength of the hinges. Screw-fastening through to the leg of the outer sheet ensures high pull-out strength. Thanks to this method, the two steel legs are additionally interconnected and this increases further the stability of the panel. Drawing on the right: Typical hinge detail including compressive, weather-resistant sealing (hinge design may vary, depending on the manufacturer). The hinge fastening elements must be positioned as shown. For a self-tapping screw with a diameter of 6.3 mm, a pilot hole with a diameter of 4.5 mm is recommended. The screw should be tightened using an appropriate tool and a torque of 6 Nm. The fasteners should be installed within the dimensional range (x), in order to ensure safe hinge fastening using the two additional steel legs which are placed one above the other Inner side Inner side (x) (x) Correct torque for fastening the hinges: 6.0 Nm for a Ø 4.5 predrilled hole Outer side Outer side All information is only general in nature. For binding values, see test documents.

5 5 hoesch sectiotec plus large surface diversity for individual demands hoesch sectiotec plus hoesch sectiotec coating systems smooth flat smooth central bead smooth grooved stucco-patterned flat stucco-patterned central bead stucco-patterned grooved

6 6 8 mm 16 mm 16 mm microprofi led V-profi led V-profi led stucco-patterned woodgrain flat woodgrain central bead woodgrain grooved Surface textures of Hoesch Sectiotec plus: for demanding and design-orientated customers, we have a large variety of cover sheet textures on offer. texture of cover sheets smooth (e) stucco-patterned woodgrain grooved (n) central bead (s) microprofi led (m) V-profi led* (V) outer sheet inner sheet available / on request / * also with stucco-patterned

7 7 hoesch sectiotec plus diversity of colours hoesch sectiotec plus hoesch sectiotec coating systems PLADUR * SP 9002 PLADUR * SP 9006 PLADUR * SP 9010 PLADUR * SP 9016 PLADUR * SP 8014 PLADUR v SP 5010 PLADUR * DU 9002 on request 500 / 610 / 732 [mm] 500 / 600 / 732 [mm] 500 / 610 [mm] 500 / 553 / 610 [mm] 500 / 610 / 732 [mm] 610 [mm] 500 / 553 / 610 / 732 [mm] inner cover sheet * Pladur is a registered trademark of the thyssenkrupp steel europe ag

8 8 PLADUR * SP 3000 PLADUR * SP 7016 Film coating GOLDEN OAK Film coating NUSSBAUM PLADUR * SP 1021 PLADUR * SP 9007 RSL 610 [mm] 500 / 610 [mm] 500 / 610 [mm] 500 / 610 [mm] 610 [mm] 610 [mm] 500 / 610 [mm] for technical reasons, the colours shown may be different from the original colours. for further information on colours, please see pages * Pladur is a registered trademark of the thyssenkrupp steel europe ag

9 9 hoesch sectiotec plus outer surface with cassette design hoesch sectiotec plus hoesch sectiotec coating systems new to our programme: hoesch sectiotec plus with cassette pattern. high-quality steel cover sheets with an excellent fi nish offer visual and technical benefi ts to the user. the elements are available in the following overall heights: standard pattern: 520 mm x 330 mm Broad pattern: 1,000 mm x 330 mm the large range of hoesch sectiotec plus with all its variations is rounded off by our extensive colour range and various surface fi nishes. 500 mm 553* mm 610 mm the range of design options is extended by two different cassette patterns: standard pattern Broad pattern * on request

10 10 For elements with an overall height of 500 mm, the cassette pattern is always arranged centrally. For an overall height of 610 mm, the pattern may also be located off-centre, the distance to the panel upper edge is 85 mm or 195 mm. The spacing between the cassette patterns is at least 80 mm for both standard and broad patterns. Arrangement of the cassette pattern (exemplary illustration): Overall height: 500 mm Overall height: 610 mm Overall height: 610 mm Overall height: 610 mm 85/140/195 39,5 500/610

11 11 Hoesch Sectiotec Technical features Hoesch Sectiotec plus Hoesch Sectiotec Coating systems Special features of Hoesch Sectiotec : good corrosion protection by a ZM EcoProtect coating (for more information, see page 18) best thermal insulation properties high load bearing capacity high degree of prefabrication diffusion-tight cover sheets large colour scheme elements available in three different heights sandwich element with a long service life and excellent processing properties for different types of doors outer sheets available with various roll formed finishes special design of the cover sheets in the tongue and groove area allowing safe fastening of the hinges without an additional foamed reinforcement Element Element thickness Element height Material thickness outer sheet inner sheet Max. length supplied Weight Thermal resistance Heat transfer coefficient Thermal resistance Heat transfer coefficient in accordance with DIN EN ISO 6946 DIN EN and EN with joint impact R U R U mm mm mm mm m kg/m 2 m 2 K/W W/m 2 K m 2 K/W W/m 2 K 488* * 10.5 Hoesch Sectiotec 60* to * Element thickness 39 mm Element thickness 60* mm Element thickness 80 mm * 12.0 * on request All data without engagement. All information provided here is for guidance only.

12 12 Span m Hoesch Sectiotec - Wind load applied to doors on the outside of a building as per EN Door element Door element Door element Door element without window and without window and without window and with 4 windows and without with small with large without reinforcing strips reinforcing strips reinforcing strips reinforcing strips 2.5 Class Class Class 3 Class Class Class Class 3 Air permeability as per EN Span Door element without reinforcing strips m 2.5 Class Class Class 3 4 Class 4 Span Heat transfer coefficient as per EN Door element without window U value Door element with windows U value m W/m 2 K W/m 2 K Classification Class 1 Class 2 Class 3 Class 4 Class 5 Load including a 25 % safety factor 300 Pa 450 Pa 700 Pa 1000 Pa > 1000 Pa Resistance against penetrating water as per EN Door element without Span reinforcing strips m 4.0 Class 2 All data is related to an element thickness of 39 mm and is for information only. Binding figures are available on request. Design of hinges for Hoesch Sectiotec : For Hoesch Sectiotec we have developed a perfect solution relating to the pull-out strength of the hinges. Screw-fastening through to the leg of the outer sheet ensures high pull-out strength. Thanks to this method, the two steel legs are additionally interconnected and this increases further the stability of the panel. Drawing on the right: Typical hinge detail including compressive, weather-resistant seal (hinge design may vary between various manufacturers). The hinge fastenings should be positioned as shown. For a self-tapping screw with a diameter of 6.3 mm, a pilot hole with a diameter of 4.5 mm is recommended. The screw should be tightened using an appropriate tool and a torque of 6 Nm. The fulcrum should be on the centre line of the gap between the sectional door elements. The fasteners should be installed within the dimensional range (x) in order to ensure safe hinge fastening using the two additional steel legs which are placed one above the other (x) (x) Inner side Inner side Correct torque for fastening the hinges: 6.0 Nm for Ø 4.5 mm pilot hole Outer side Outer side

13 13 hoesch sectiotec surfaces and textures hoesch sectiotec pluscoating systems hoesch sectiotec smooth flat smooth grooved stucco-patterned flat stucco-patterned grooved

14 14 8 mm 16 mm 16 mm microprofi led V-profi led V-profi led stucco-patterned Surface textures of Hoesch Sectiotec : for demanding and design-orientated customers, we have a large variety of cover sheet textures on offer. texture of cover sheets smooth (e) stucco-patterned grooved (n) microprofi led (m) V-profi led* (V) outer sheet inner sheet available / on request / * also with stucco-patterned

15 15 hoesch sectiotec diversity of colours hoesch sectiotec pluscoating systems hoesch sectiotec PLADUR * SP 9002 PLADUR * SP 9006 PLADUR * SP 9010 PLADUR * SP ** / 610 [mm] 488* / 610 [mm] 610 [mm] 610 [mm] * Pladur is a registered trademark of the thyssenkrupp steel europe ag ** on request

16 16 PLADUR ** SP [mm] PLADUR ** SP [mm] Inner sheet: PLADUR ** DU 488** / 610 [mm] inner cover sheet, colours in line with ral * Pladur is a registered trademark of the thyssenkrupp steel europe ag ** on request for technical reasons, the colours shown may be different from the original colours. for further information on colours, please see pages

17 17 Hoesch sectional door elements Protection against weathering for decades Hoesch Sectiotec plus Hoesch Sectiotec Coating systems ZM: ZM EcoProtect AZ: GALVALUME ZA: GALFAN Z: Hot-dip galvanised steel Test time (h) Protective paint ZM EcoProtect Layer thickness (µm) Steel Corrosion protection Hoesch sectional door elements are exposed to constantly changing weather conditions. Salt-spray test first occurrence of red rust The metallic coatings have different degrees of resistance to saline conditions. ZM EcoProtect Coil-coating Protective film We therefore attach great importance to using high-quality, cost-effective corrosion protection. In addition, the client s needs for colour and architectural appearance must be met whilst ensuring adequate protection against corrosion. The well-proven high level of protection offered by hot-dip galvanised steel is even excelled by coil-coated steel strip. PUR rigid foam Steel Coil-coating ZM EcoProtect Organic coatings An organic coating applied to the cover sheets of our products gives corrosion protection as per DIN (corrosion protection class II or III), consistent quality and surface finish. In the case of the PLADUR * system, two coats of lacquer are applied in a single operation and the strip is then oven-cured. In addition, the surfaces may be provided with a strippable protective film. ZM EcoProtect Protective paint * Pladur is a registered trademark of the ThyssenKrupp Steel Europe AG

18 hoesch sectional door elements information on colours and coatings 18 RAL-Farben PLADUR * Relief when developing PladUr * relief the focus was placed on haptics. the high resistance to wear and the individual surface fi nish can provide a unique and unrivalled selling proposition for fi nal products. the great number of possible variations with respect to colour and texture allows individual, highly decorative designs of PladUr * relief to be created to meet the requirements of even demanding customers and end users. the surface texture, especially selected for this product, is highly resistant to mechanical loads. PLADUR * Wrinkle the coil-coated fl at product PladUr * wrinkle impresses not only with its special surface texture and colour but also with its excellent resistance to wear, which means the customer benefi ts from its long service life. with its matt surface, combined with the chosen colour, PladUr * wrinkle makes an excellent impression when aesthetic appearance is important. PladUr * wrinkle is applied as a 2-layer system to a sheet, both sides of which are hot-dip galvanised. PladUr * wrinkle may be used for a large range of processing and other requirements: Benefi ts: very high resistance to wear good corrosion protection very good resistance to thermal shock reduced sensitivity to dirt decorative texture Your choice of RAL you can choose, in addition to standard colours, any colour from the ral range. the minimum order quantity is 1000 metres. Short lead times the standard colours shown on pages 8/9 and 16/17 of this brochure are supplied from stock, which means short delivery periods. Please contact our sales offi ces for details. * Pladur is a registered trademark of the thyssenkrupp steel europe ag

19 19 Hoesch Bausysteme GmbH // Hammerstraße 11 // D Kreuztal Tel: +49 (0) // Fax: +49 (0) // info@hoesch-bau.com // The information provided in this leaflet is subject to technical modifications. Details of features can be guarenteed only as far as these are explicitly confirmed in writing on a case by case basis. GB Info Hoesch Sectional door elements BC