Profile metalice pentru sisteme gips-carton Metallic profiles for gypsum boards

Size: px

Start display at page:

Download "Profile metalice pentru sisteme gips-carton Metallic profiles for gypsum boards"

Karen Stephens
6 years ago
Views:

METAL WORK INDUSTRY Popeºti Leordeni, ªos.

103, Judeþul Ilfov, Cod Poºtal 077160 Tel.

5296.277; (004) 021.3694.653; Fax: (004) 021.

1 METAL WORK INDUSTRY Popeºti Leordeni, ªos. de Centurã a Municipiului Bucureºti, Nr. 103, Judeþul Ilfov, Cod Poºtal Tel.: (004) ; (004) ; (004) ; (004) ; Fax: (004) office@metalwork.ro Web-site:

Utilizãri: realizarea plafoanelor cu schelet de susþinere metalic; placarea pereþilor; montarea bordurilor de margine pentru a prelua inegalitãþile peretelui; înglobarea ºi fixarea de pereþi a

2 pentru plafoane gips-carton Metallic profiles for gypsum board ceilings 21 PROFILE PERIMETRALE PERIMETER PROFILES Profilele perimetrale în formã de U, destinate plafoanelor false ºi pereþilor din gips-carton, sunt elemente metalice realizate din tablã zincatã, prin laminare la rece, cu grosimea de mm sau mm. Utilizãri: realizarea plafoanelor cu schelet de susþinere metalic; placarea pereþilor; montarea bordurilor de margine pentru a prelua inegalitãþile peretelui; înglobarea ºi fixarea de pereþi a profilelor de susþinere la tavanele din gips-carton; realizarea racorduri la tavan; confecþionarea mãºtilor ºi a pereþilor pentru instalaþii; mascarea rosturilor de dilataþie. UD21/05 UD21/06 UD28/05 UD28/ x190x220 x190x220 x190x300 x190x300 Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot U-shaped perimeter profiles for fake ceilings and gypsum-board walls, are metallic elements made of zinced metal sheets, cold laminated, 0.5 or 0.6 mm thick. Uses: metallic support structure ceilings; wall plating; mounting side rims for taking over the irregularities of the wall; incorporating and fastening support profiles for gypsum-board ceilings; ceiling connections; making shields and walls for installations; masking dilatation joints. The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages. 21/

Dimensiunile acestora se potrivesc cu dimensiunile profilelor perimetrale în formã de U cu care se îmbinã.

3 pentru plafoane gips-carton Metallic profiles for gypsum board ceilings 22 PROFILE PORTANTE BEARING PROFILES Profilele portante tip CD, realizate din tablã zincatã, prin laminare la rece, cu grosimea de mm sau mm, sunt profilele de susþinere ale plafoanelor false, de ele fiind fixate plãcile din gips-carton. În funcþie de procedeul de suspendare ºi încãrcare, existã diverse soluþii. Dimensiunile acestora se potrivesc cu dimensiunile profilelor perimetrale în formã de U cu care se îmbinã. Utilizãri: realizarea plafoanelor false; mascara rosturilor de dilataþie; realizarea racordurilor la tavan; mascãri din gips-carton. CD 50/ / 15 CD50//15 CD50//27 CD50//27 CD60//15 CD60//15 CD60//27 CD60// x250x400 x250x400 x450x400 x450x400 x250x530 x250x530 x450x530 x450x530 Avantaje: uºor de montat (datoritã sistemului de noduri flexibil, modular); economic (chiar ºi pentru structuri portante cu geometrii complicate); sigur ( datoritã proiectãrii tehnice îmbunatãþite a sistemului). Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot 15/27 CD carrying profiles, made of zinced metal sheets, by cold lamination, 0.5 or 0.6 mm thick, are profiles used to support fake ceilings, fastened to gypsum-board plates. Depending on the suspension and loading procedure, there are various solutions. Their sizes match the sizes of the U-shaped perimeter profiles with which they connect. 15/27 50/60 Uses: fake ceilings; masking dilatation joints; ceiling connections; gypsum-board shields. Advantages: easy to mount (due to the flexible and modular node system); economical (even for carrying structures with complicated geometries); safe (due to the enhanced technical design of the system). The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages. 24 5

The CLIP cross for the CD profiles is the metallic element achieved through the cold rolling process of the hot deep galvanized steel, thikness 0.

TR CLIP 50 20 600 4000x155x710 Profilele Omega, destinate plafoanelor false ºi pereþilor din gips-carton, sunt elemente metalice realizate din tablã de oþel zincatã, prin laminare

Lungimile standard ale profilelor sunt de mm ºi 4000 mm.

4 pentru plafoane gips-carton Metallic profiles for gypsum board ceilings 23 TRAVERSA CLIP 24 CROSSING PATCH PROFILE OMEGA OMEGA TYPE PROFILES Traversa CLIP pentru profilele CD este elementul metalic realizat prin laminare la rece din tabla zincata cu grosimea de mm, utilizat pentru fixarea profilelor CD. Se livreaza în pachete. The CLIP cross for the CD profiles is the metallic element achieved through the cold rolling process of the hot deep galvanized steel, thikness 0.60 mm and it is used for the CD profiles cliping. Delivered in packages. TR CLIP x155x710 Profilele Omega, destinate plafoanelor false ºi pereþilor din gips-carton, sunt elemente metalice realizate din tablã de oþel zincatã, prin laminare la rece, cu grosimea de mm sau mm. Se utilizeazã la placarea pereþilor cu panouri din gips-carton pentru a prelua inegalitãþile peretelui. Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot Omega profiles, for fake ceilings and gypsum-board walls, are metallic elements made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick. Used in plating walls with gypsum-board panels for taking over the inequalities of the wall. The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages Omega 20/05 Omega 20/ x170x700 x170x

5 pentru pereþi despãrþitori Metallic profiles for separating walls 25 GHIDAJE "U" "U" TYPE GUIDES Ghidajele în formã U sunt elemente metalice confecþionate din tablã zincatã, prin laminare la rece, cu grosimea de mm sau mm ºi utilizate pentru scheletul pereþilor despãrþitori din gips-carton. Utilizãri: primirea ºi transmiterea încãrcãrilor din scheletul metalic de susþinere al pereþilor de gips-carton, cãtre structura de rezistenþã a clãdirii; realizarea structurilor pentru pereþi de compartimentare, cu fixarea în podea ºi plafon; placarea pereþilor. UW50 UNI/05 UW50 UNI/06 UW75 UNI/05 UW75 UNI/06 UW100 UNI/05 UW100 UNI/ x360x330 x360x330 x360x450 x360x450 x360x610 x360x610 Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot U guides are metallic elements made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick, used for the structure of gypsum-board partitioning walls. Uses: receiving and transmitting loads from the metallic structure for supporting gypsum-board walls, to the resistance structure of the building; making structures for partitioning walls, by fastening to the floor and ceiling; wall plating. 35 The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages. 50/75/

6 pentru pereþi despãrþitori Metallic profiles for separating walls 26 GHIDAJE "U" NORMA DIN "U" TYPE GUIDES ACCORDING TO DIN Ghidajele în formã U norma DIN sunt elemente metalice cu alte dimensini ale laturilor exterioare, confecþionate din tablã zincatã, prin laminare la rece, cu grosimea de mm sau mm ºi realizate pentru scheletul pereþilor despãrþitori din gips-carton. Utilizãri: primirea ºi transmiterea încãrcãrilor din scheletul metalic de susþinere al pereþilor de gips-carton, cãtre structura de rezistenþã a clãdirii; realizarea structurilor pentru pereþi de compartimentare, cu fixarea în podea ºi plafon; placarea pereþilor. UW50 DIN/05 UW50 DIN/06 UW75 DIN/05 UW75 DIN/06 UW100 DIN/05 UW100 DIN/ x470x330 x470x330 x470x450 x470x450 x470x610 x470x610 Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot DIN-norm U guides are metallic elements, with other sizes of the exterior sides, made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick, used for the structure of gypsum-board partitioning walls. Uses: receiving and transmitting loads from the metallic structure for supporting gypsum-board walls, to the resistance structure of the building; making structures for partitioning walls, by fastening to the floor and ceiling; wall plating. The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages. 50/75/

7 pentru pereþi despãrþitori Metallic profiles for separating walls 27 MONTANÞI "C" "C" TYPE BEAMS Montanþii CW, profile de structurã pentru pereþii despãrþitori din gips-carton, sunt elemente metalice realizate din tablã zincatã, prin laminare la rece, cu grosimea de mm sau mm. Aceºtia se monteazã în ghidajele UW, fiind montaþii verticali ai scheletului pereþilor din gips-carton. Plãcile din gips-carton se fixeazã de montanþii CW a cãror lungime urmãreºte înãlþimile interioare uzuale la clãdiri, astfel, cantitatea pierderilor din tãierea la dimensiune a profilelor sã fie minimã. Pentru o îmbinare perfectã, fãrã elemente speciale, dimensiunile montanþilor CW se potrivesc cu cele ale ghidajelor UW. Montanþii de tip C sunt telescopici (se pot îmbina si prelungi fãrã alte accesorii). Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot confecþiona ºi la alte dimensiuni. Se livreazã în pachete. CW50 UNI/05 CW50 UNI/06 CW75 UNI/05 CW75 UNI/06 CW100UNI/05 CW100UNI/ x410x340 x410x340 x410x500 x410x500 x410x645 x410x645 CW stanchions, structural profiles for gypsum-board partitioning walls, are metallic elements made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick. They are mounted in UW guides, being the vertical stanchions of the structure of gypsum-board walls. The gypsum-board plates are fastened to the CW stanchions whose length matches the interior heights used in buildings, thus, the quantity of waste from cutting the profiles to the size is minimum. In order to achieve perfect joining, without special elements, the sizes of the CW stanchions match those of the UW guides. C stanchions are telescopic (they can be joined and extended without other accessories). The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages /75/

8 pentru pereþi despãrþitori Metallic profiles for separating walls 28 MONTANÞI "C" NORMA DIN "C" TYPE BEAMS ACCORDING TO DIN Montanþii CW norma DIN, profile de structurã a pereþilor despãrþitori din gips-carton, sunt elemente metalice realizate din tablã zincatã, prin laminare la rece, cu grosimea de mm sau mm. Aceºtia se monteazã în ghidajele UW norma DIN, fiind montaþii verticali ai scheletului pereþilor din gips-carton. Plãcile din gips-carton se fixeazã de montanþii CW norma DIN a cãror lungime urmãreºte înãlþimile interioare uzuale la clãdiri, astfel, cantitatea pierderilor din tãierea la dimensiune a profilelor sã fie minimã. Pentru o îmbinare perfectã, fãrã elemente speciale, dimensiunile montanþilor CW norma DIN se potrivesc cu cele ale ghidajelor UW norma DIN. Montanþii de tip C norma DIN sunt telescopici (se pot îmbina si prelungi fãrã alte accesorii). Lungimile standard ale profilelor sunt de mm ºi 4000 mm. La cererea clienþilor, aceste produse se pot CW50 DIN/05 CW50 DIN/06 CW75 DIN/05 CW75 DIN/06 CW100 DIN/05 CW100 DIN/ x475x340 x475x340 x475x500 x475x500 x475x645 x475x645 DIN-norm C stanchions, structural profiles for gypsum-board partitioning walls, are metallic elements made of zinced metal sheet, by cold lamination, 0.5 or 0.6 mm thick. They are mounted in DIN-norm UW guides, being the vertical stanchions of the structure of gypsum-board walls. The gypsum-board plates are fastened to the DIN-norm CW stanchions, whose length matches the interior heights used in buildings, thus, the quantity of waste from cutting the profiles to the size is minimum. In order to achieve perfect joining, without special elements, the sizes of the DIN-norm CW stanchions match those of the DIN-norm UW guides. DIN-norm C stanchions are telescopic (they can be joined and extended without other accessories). The standard lengths of the profiles are mm and 4000 mm. Upon clients' request, these products may be manufactured also in other sizes. Delivered in packages /75/

SECTION NON-STRUCTURAL METAL FRAMING

SECTION NON-STRUCTURAL METAL FRAMING PART 1 - GENERAL 1.1 DESCRIPTION SECTION 09 22 16 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable