BELZONA KNOW-HOW TCC TANKS AND CHEMICAL CONTAINMENT AREAS BELZONA TCC SYSTEM SELECTOR BELZONA KNOW-HOW FOR TANKS AND CHEMICAL CONTAINMENT AREAS
|
|
|
- Scot Dorsey
- 5 years ago
- Views:
Transcription
1 KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS B E L Z O N A TCC TCC SYSTEM SELECTOR FOR TANKS AND CHEMICAL CONTAINMENT AREAS KNOW-HOW In addition to Tanks and Chemical Containment Areas, Belzona s Know- How extends to the repair, renovation, and reclamation of: Centrifugal Pumps Heat Exchangers Mechanical Power Transmission Ships and Offshore Structures Valves, Pipes and Fittings Positive Displacement Pumps Solids Handling Machinery Fans, Blowers and Compressors Engines and Casings Gaskets, Seals and Shims General Equipment Please call or write for additional Information. SYSTEM Belzona TCC-1 Belzona TCC-2 Belzona TCC-3 Belzona TCC-5 Belzona TCC-6 Belzona TCC-7 Belzona TCC-8 Belzona TCC-9 Belzona TCC-10 Belzona TCC-11 Belzona TCC-12 Belzona TCC-13 Belzona TCC-14 Belzona TCC-15 APPLICATION Sealing cracks, porous welds, bolted and riveted joints on tanks Sealing seams on floating tank tops Waterproofing and insulation protection Rebuilding and protecting steelwork Re-forming tank support for perfect fit and to provide insulation Securing loose anchor bolts Applying non-skid surfaces to pedestrian areas Repairing damaged concrete and restoring draining Reseating drain covers and gratings Rebuilding damaged expansion joint edges Sealing expansion and construction joints Bonding and grouting chemical resistant tiles Repairing/resurfacing floating tank top seals Sealing and protecting containment areas BS EN ISO Certificate No. Q09335 Copyright 2003 by Belzona International, Ltd. All rights reserved. No part of this work covered by the copyrights herein may be reproduced or used in any form or by any means - graphic, electronic or mechanical including photocopying, recording, taping, or information storage and retieval systems - without written permission of the publisher. Belzona is a registered trademark. INC NW 88th Court, Miami, Florida 33172, U.S.A. Tel: (305) , Fax: (305) belzona@belzona.com POLYMERICS, LTD. Claro Road, Harrogate, North Yorkshire HG14AY England Tel: +44 (0) , Fax: +44 (0) belzona@belzona.co.uk
2 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 2/8 REPAIR AND REBUILDING Repair damage to floors and retaining walls. Reslope to restore proper drainage of floors and pads. Rebuild pump and tank bases. Refer to Belzona TCC-9. Reseat drain covers and gratings. Refer to Belzona TCC-10. Belzona TCC-9
3 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 3/8 COATINGS AND LININGS Bond and grout chemical resistant tiles in place. Refer to Belzona TCC-13. Coat containment areas to protect against chemical attack. Seal porous concrete. Repair existing linings. Refer to Belzona TCC-15. Belzona TCC-15 Belzona TCC-13
4 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 4/8 JOINTS AND CRACKS Seals cracks. Refer to Belzona TCC-9. Rebuild damaged expansion joint edges. Refer to Belzona TCC-11. Seal expansion/construction joints. Refer to Belzona TCC-12. Belzona TCC-11, TCC-12 SAFETY Apply a non-skid surface to floors and tops of retaining walls. Refer to Belzona TCC-8. Belzona TCC-8
5 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 5/8 TANK TOPS Seal seams on floating tank tops. Refer to Belzona TCC-2. Waterproofing. Refer to Belzona TCC-4. Rebuild corrosion pitting. Protect agains chemical attack. Refer to Belzona TCC-5. Belzona TCC-2 Repair/resurface floating tank top seals. Refer to Belzona TCC-14. SAFETY Apply non-skid surfaces to tank tops, ladder rungs, and catwalks. Refer to Belzona TCC-8. Belzona TCC-8
6 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 6/8 INTERNAL STRUCTURES Protect internal steelwork against corrosion and chemical attack. Rebuild and seal baffles and division plates. Refer to Belzona TCC-5. SEAMS AND PENETRATIONS Belzona TCC-5 Seal cracked or porous welds. Seal bolted or riveted joints. Protect weld seams from corrosion and chemical attack. Repair leaks around manways and ports. Refer to Belzona TCC-1. Belzona TCC-1
7 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 7/8 FORROS Repair/renew damaged coatings. Refer to Belzona TCC-3. Rebuild and protect interior surfaces against corrosion or chemical attack. Refer to Belzona TCC-5. Belzona TCC-3
8 TCC KNOW-HOW FOR THE REPAIR, RENOVATION AND RECLAMATION OF TANKS AND CHEMICAL CONTAINMENT AREAS 8/8 INSULATION AND ENERGY CONSERVATION Protect soft insulation against impact damage. Waterproof insulation and claddings. Refer to Belzona TCC-4. Coat exposed tank tops and wall surfaces to reduce thermal loading. Belzona TCC-4 Coat exposed tank tops and wall surfaces to reduce condensation. EXTERNAL STRUCTURES AND SUPPORT Protect external steelwork against corrosion and chemical attack. Refer to Belzona TCC-5. Ref-form saddle supports for horizontal tanks. Provide electrical insulation between tank and support. Refer to Belzona TCC-6. Secure loose anchor bolts. Refer to Belzona TCC-7. Belzona TCC-7
Environmental Process Control Field Report 8-Oct-14
Environmental Process Control Field Report 8-Oct-14 Underwater Cleaning / Inspection Cathedral Water Co. Clearfork Tank Potable Water Storage Tank Submitted To: Environmental Process Control Alan Leslie
Resimac Ltd. Engineered Polymer Solutions
Resimac Ltd Engineered Polymer Solutions Resimac overview WHO WE ARE. UK based manufacturer Dedicated to research and development Emphasis on quality and quality control systems Matthew McDonnell 15 years
Application Engineering Services. Solutions for all Surface Engineering Needs
Application Engineering Services Solutions for all Surface Engineering Needs Henkel Your Partner for Maintenance & Repair Solutions With years of experience in the industrial maintenance market, Henkel
AS The External Waterproofing Membranes Standard
AS 4654-2 The External Waterproofing Membranes Standard NOTE This external waterproofing standard contains solutions for problems which have not been addressed in other countries. CONFORMANCE CONDITIONS
Tank Inspection Report Town of Christiansburg, VA Hills Tank Liquid Engineering Corporation 36903
Tank Inspection Report Liquid Engineering Corporation 36903 GENERAL Tank Name: Type: On-Grade Standpipe City: Christiansburg Tank Capacity: 500,000 Gallon State: Virginia Type of Construction: Welded Steel
Canadian Natural Resources Ltd. GENERAL PRESSURE VESSEL INFORMATION Job #
District: Karr Creek Facility: Sturgeon Lake Battery Vessel Name Equipment Number: Oil Treater Orientation: Horizontal Canadian Natural Resources Ltd. GENERAL PRESSURE VESSEL INFORMATION Job # 10.113812
Product Systems EXTERNAL WATERPROOFING OF BELOW GROUND CONCRETE WALL & SLAB. AQUAFIN-IC CRYSTALLINE WATERPROOFING Schematic sketches
No... - EXTERNAL WATERPROOFING OF BELOW GROUND CONCRETE WALL & SLAB ///=///=///=///=///= Waterstop Mud slab Sandwich application : just prior to concrete pour, apply coat AQUAFIN-IC in slurry or dry shake
GEOTHERMAL POWER INDUSTRY SOLUTIONS
GEOTHERMAL POWER INDUSTRY SOLUTIONS Chesterton Solutions and Services Help Geothermal Plants: Reduce/eliminate fluid leakage Improve equipment reliability and operability Protect assets from chemical attack,
SECTION SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING
SECTION 093000 - SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used for sound reduction, crack isolation
Renovation instructions
! 1(13) Renovation instructions The purpose of these instructions is to inform you of the things to consider when renovating an apartment. You can avoid many possible problems and additional costs following
Time-saving mortars for drains & sewers
Time-saving mortars for drains & sewers Ideas Concepts Solutions for the construction and renovation of sewers, pipes, reservoirs, roads, industrial flooring and anchors. Save time with Time-saving mortars
Contents EN 14015:2004 (E) page
Contents page Foreword... 11 1 Scope... 12 2 Normative references... 13 3 Terms, definitions, symbols and abbreviations... 15 3.1 Terms and definitions... 15 3.2 Symbols... 19 3.3 Abbreviations... 21 4
40'-0" PIPE SUPPORT (TYP.) (SEE DWG. NO. SK-2 OR DWG. NO. SK-4)
SK-1 STANDARD LENGTH 4.301 40'-0" A 6" 2'-0" 9'-0" 9'-0" 9'-0" 9'-0" 2'-0" A 3" OF EXPOSED AT EACH END OF PIPE. PIPE SUPPORT (TYP.) (SEE DWG. NO. SK-2 OR DWG. NO. SK-4) EXPOSED PIPE MINIMUM GAUGE AND THICKNESS
P.E. 4-1,000,000 12, 2014 (270) C
111 Fifth Street Henderson, KY 42420 March 12, 2014 Mr. Tom Williams, P.E. General Manager (270) 869-6621 Job No. 314031- C If you would like to speak with Patrick Heltsley concerning this report, call
Premier Cellars (UK) Durability and Watertightness
Broomfield Consultants 30B Vine Road, East Molesey Surrey KT8 9LF, UK John P. Broomfield DPhil, EurIng, CSci, FICorr, FIM 3, FNACE, FCS Tel/Fax +44 (0) 20 8941 6696 Mobile +44 (0) 77 11 00 6197 Email:
Marine & Offshore Fire Divisions
Marine & Offshore Fire Divisions bulkhead & deck systems U-FW/GMM EN Rev: 2 Sept 18 Contents Page No. Introduction Installation Surface Coverings - General Principles - Anchors - System Repair and Maintenance
Drain DESIGN & INSTALLATION GUIDE 316L STAINLESS STEEL INDUSTRIAL FLOOR DRAINS & LINEAR DRAINAGE CHANNELS
DESIGN & INSTALLATION GUIDE 316L STAINLESS STEEL INDUSTRIAL FLOOR DRAINS & LINEAR DRAINAGE CHANNELS KEMDRAIN TM STAINLESS INDUSTRIAL FLOOR DRAINS AND LINEAR CHANNELS, OFFERING ALL THE BENEFITS OF 316L
Plant and Equipment Reliability. Solutions for Industrial Maintenance
Plant and Equipment Reliability Solutions for Industrial Maintenance Doug Martin; E. l. du Pont de Nemours and Company Reliability Starts Here The first step towards equipment reliability is to initiate
For Bridge Decks, Buildings and Construction.
For Bridge Decks, Buildings and Construction www.stirlinglloyd.com INNOVATION AND EXPERIENCE Since 1970 Stirling Lloyd has been involved in the development, manufacture and application of specialist membrane
Pre-Fabricated Roof Curbs
Knock Down Curb Assembly Instructions These roof curb assembly instructions are to be used as general guidelines only. Included with shipment are as-built drawings for proper location of sections and channels.
SECTION SHEET MEMBRANE WATERPROOFING AND CRACK ISOLATION
SECTION 093000 - SHEET MEMBRANE WATERPROOFING AND CRACK ISOLATION PART 1 - GENERAL This specification includes the sheet membrane used as waterproofing, vapor retarder, and crack isolation in conjunction
PHASE 1 Foundation & Drainage New Construction Phased Inspection Report John & Mary Doe 5237 Clinton Street, Denver, CO 80238
PHASE 1 Foundation & Drainage New Construction Phased Inspection Report John & Mary Doe 5237 Clinton Street, Denver, CO 80238 PHASE 1 Foundation & Drainage New Construction Phased Inspection Report Buyers
Belzona Pioneers Multipurpose Metal Repair System for Oil Contaminated and Wet Surfaces, even Underwater
Belzona Pioneers Multipurpose Metal Repair System for Oil Contaminated and Wet Surfaces, even Underwater New paste grade material achieves a quick, durable repair even in oil contaminated wet and cold
August 2008: Issue 1. Non - Residential New Build 4.5 Basements
Non - Residential New Build 4.5 Basements August 2008: Issue 1 Non-residential new build 4.0 Non-residential New Build Basements Contents Introduction find online page Solution optimiser and pathfinder
Expansion Joint Covers (079513)
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
roof walkway systems C1/Sfb(23)Xh 03.11
roof walkway systems C1/Sfb(23)Xh 03.11 The highest performance in access, maintenance and protection Neaco's range of roof walkway and handrail systems provide safe, secure and long-term access solutions
adjustable fusion shower pan surface mounted on subfloor installation guide
a a) Wall b) Tile c) Adjustable Shower Pan d) Liquid Membrane e) Crack Isolation Tape f) Cement Board g) Subfloor h) Joists b d c f h g e adjustable fusion shower pan surface mounted on subfloor www.trendingaccessibility.com
SECTION SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING
SECTION 093000 - SHEET MEMBRANE SOUND REDUCTION, CRACK ISOLATION / JOINT BRIDGING, AND WATERPROOFING PART 1 - GENERAL This specification includes the sheet membrane used for sound reduction, crack isolation
Blue Sky Sanitary Design Rudi Groppe. PMA & United Fresh Joint Listeria Workshop
Blue Sky Sanitary Design Rudi Groppe Hygienic Design What are the next steps? Know the Enemy Sanitary Design Guiding Principles Zone Definitions Facility Design Sanitary Methods of Manufacturing Focus:
adjustable fusion shower pan on wood joists installation guide
a a) Wall b) Tile c) Shower Pan d) Liquid Membrane e) Crack Isolation Tape f) Cement Board g) Subfloor h) Joists b d c f h g e adjustable fusion shower pan on wood joists installation guide www.trendingaccessibility.com
Margaret Batts Tobin Laboratory
Roof Evaluation of Margaret Batts Tobin Laboratory The University of Texas At San Antonio Performed for UTSA Zero/Six Consulting, LLC 8423 Stewart Road Galveston, Texas 77554 409 740 0090 voice Table of
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
Page 210500-1 SECTION 210500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
FIELD COPY ATTACHMENT
FIELD COPY ATTACHMENT The released plans for the project must be on site and available to the inspectors at all times. No inspection will be done without the released field plans. If you have any questions,
BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT NON-STRUCTURAL ELEMENTS # 3. Restraint systems
SEISMICALLY BRANZ FACTS RESILIENT NON-STRUCTURAL ELEMENTS SEISMICALLY RESILIENT DESIGN CRITERIA # 2 NON-STRUCTURAL ELEMENTS # 3 Restraint systems The next step in the non-specific design pathway in NZS
Sheetseal 226 RIW. Sheetseal 226
CI/SfB Vs1 April 2009 CERTIFICATE No 92/2817 Sheetseal 226 is a cold applied, high density polyethylene film, coated with a bitumen/rubber self adhesive layer with a removable reinforced silicone paper.
MorTec DRAIN. MorTec DRAIN Page 1 of 4. Two-part thin-layer epoxy resin drainage mortar DESCRIPTION
CI/SfB Date Issued: 29th July 2016 MorTec DRAIN Two-part thin-layer epoxy resin drainage mortar DESCRIPTION MorTec DRAIN is a thin-layer, two-part epoxy resin drainage mortar for use in combination with
AIR HANDLING UNITS. Beyond Compare
AIR HANDLING UNITS Beyond Compare VENTROL QUALITY Stands Apart Not all air handling units (AHUs) are the same. A gives you a superior cabinet that exceeds all expectations. Take a look at how Ventrol has
Fabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Klick KS500 DLKK
Fabrications, Safety & Lighting Solutions Kingspan Day-Lite KS500 DLKK Applications Kingspan Day-Lite is a secret-fix wall light system typically suited for vertical applications. Featuring an innovative
SECTION GROUND WATER STORAGE TANKS
SECTION 33 16 13 GROUND WATER STORAGE TANKS PART 1: GENERAL 1.01 SCOPE A. Section includes requirements for designing, fabricating, and erecting a welded steel ground storage tank. 1.02 SYSTEM DESCRIPTION
LIST OF DRAWINGS PLAN TITLE
LANDFILL SITE [CLOSED 00] PLAN.... 5. TITLE LIST OF DRAWINGS EXISTING PROCESS DIAGRAM PROPOSED PROCESS DIAGRAM EXISTING EQUIPMENT LAYOUT PLAN PROPOSED EQUIPMENT LAYOUT PLAN ELEVATION D AND DETAILS TREATMENT
Port of Lake Charles RE: 3501 Bayou D Inde Road 200,000 Gallon EWT
P.O. Box 3753 Lake Charles, LA 70602 July 21, 2016 Mr. Nick Pestello Assistant Director of Engineering (337) 794-3687 Job No. 316288 If you would like to speak with Patrick Heltsley concerning this report,
HYDROPOWER INDUSTRY SOLUTIONS
HYDROPOWER INDUSTRY SOLUTIONS Solutions That Increase Reliability and Reduce Costs Chesterton is a global manufacturer of industrial fluid sealing systems, industrial coatings, lubricants, and maintenance
June Non - Residential Refurbishment 5.5 Basements
June 2010 Non - Residential Refurbishment 5.5 Basements Non-residential refurbishment 5.0 Non-residential Refurbishment Basements Contents Introduction find online page Solution optimiser and pathfinder
PACKAGED SYSTEMS INSTALLATION INSTRUCTIONS
PACKAGED SYSTEMS INSTALLATION INSTRUCTIONS NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Part #FMF-03-333
Examples of Installation Method
Examples of Installation Method ALPOLIC/fr is widely used for external claddings and some interior surfaces, while ALPOLIC is used mainly for signage. Both materials are also used for civil works and other
Guidance for. LNG Fuel Ready Ships
2017 Guidance for LNG Fuel Ready Ships KR APPLICATION OF "GUIDANCE FOR LNG FUEL READY SHIPS" 1. Unless expressly specified otherwise, the requirements in the Guidance apply to LNG Fuel Ready Ships for
PRODUCT SPECIFICATION SHEET BELZONA 5892 FN10106
GENERAL INFORMATION Product Description: Cost effective, two component, high temperature coating, suitable for continuous immersion in aqueous/hydrocarbon systems up to 203 F/95 C. Also suitable for dry
Important Instructions
0 10 20 30 40 1 2 0 3 ED410A Important Instructions Compressor Foundation Design Compressor Foundation Design Considerations Before you begin, you should know there are three primary factors that cause
June Residential Refurbishment Basements
June 2010 Residential Refurbishment 3.5.1 Basements Residential refurbishment 3.0 Residential Refurbishment Basements Contents Introduction find online page Solution optimiser and pathfinder 293 Design
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 4 Whitehall Court Westminster London SW1A 2ES Contact: Mr S Blackman Tel: +44 (0)20 7747 8134 Fax: +44 (0)20 7976 1634 E-Mail: sccs@steelconstruction.org
CITY OF MESQUITE BIG TOWN 2.0 MG ELEVATED STORAGE TANK REHABILITATION AND MAINTENANCE
CITY OF MESQUITE STORAGE TANK MAYOR Stan Pickett MAYOR PRO TEM Jeff Casper DEPUTY MAYOR PRO TEM Dan Aleman CITY CONTRACT E2017-004 CITY COUNCIL Robert Miklos Bruce Archer Greg Noschese Tandy Boroughs PROJECT
EcoHome-Insulation.com. Aluminium Foil Bubble Insulation. General Purpose Insulation. Dry Lining. Cavity Wall. Insulation System.
Suspended Timber Floor Applications Can be used with Floorboards or Tongue & Groove floor paneling Aluminium Foil Bubble Insulation Joist end Fitting General Purpose Insulation Dry Lining Insulation System
CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C Date of issue , Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS
Single Source Comprehensive Warranty. ARDEX Americas. Swimming Pool Guide
Single Source Comprehensive Warranty ARDEX Americas Swimming Pool Guide The ARDEX Pool System Wall Preparation WALLS SMOOTHING AND REPAIR ARDEX AM 100 TM Rapid Set Pre-Tile Smoothing and Ramping Mortar
SECTION WELDED STEEL WATER STORAGE TANKS
SECTION 33 16 20 WELDED STEEL WATER STORAGE TANKS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Elevated tanks. 2. Appurtenances and accessories. B. Related Sections: 1. Section 03 31 20 - Concrete
Phone Toll-Free Fax
FRP Manufacturing (2010) Inc. builds quality fiberglass products. We manufacture a wide range of custom storage tanks as well as a variety of standard model above-and-below ground tanks with capacities
ITEM 431 PNEUMATICALLY PLACED CONCRETE. All material shall conform to the pertinent requirements of the following items:
ITEM 431 PNEUMATICALLY PLACED CONCRETE 431.1. Description. This Item shall govern for furnishing and placing of "Pneumatically Placed Concrete" for encasement of designated structural steel members, the
Free-Standing Spring Isolators. Model FDS 1 and 2. Cataloque/Product Info, Okt 2013, Published by: PT Conexa Blower Indonesia
Free-Standing Spring Isolators Model FDS 1 and 2 Cataloque/Product Info, Okt 2013, Published by: PT Conexa Blower Indonesia Free-Standing Spring Isolators Model FDS 1 and 2 Description Kinetics Model
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26427-7 SOUTH AFRICAN NATIONAL STANDARD The installation of glazing in buildings Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27
Fabrications, Safety & Lighting Solutions. Product Data Sheet. Kingspan Day-Lite Upstand KS1000 DLU
Fabrications, Safety & Lighting Solutions Kingspan Day-Lite KS1000 DLU Applications Kingspan Day-Lite is a factory-assembled polycarbonate upstand rooflight integrated into an insulated roof panel, which
Suspended Timber Floor Applications Can be used with Floorboards or Tongue & Groove floor paneling Aluminium Foil Bubble Insulation Joist end Fitting General Purpose Insulation Dry Lining Insulation System
COMPRESSORS CB /07
COMPRESSORS CB-220 2003/07 Compressor Bases, Skids and Foundations Reciprocating compressors produce unbalanced shaking forces that will produce excessive vibration if an adequate base or foundation are
Underground Exhaust System
Operation and Maintenance Manual Underground Exhaust MONOXIVENT - SOURCE CAPTURE SYSTEMS - info@ Oct. - 2015 Underground Duct Construction Standards 1. Dig trench depth to allow for minimum distance from
sites under the deposit become anode and the lead to pitting. Hence, a good design should not allow the built up of impurities on surface
CORROSION CONTROL BY DESIGN As an old adage says corrosion prevention must start at the blackboard, at design stage, A good design is no more costly than a bad design. A bad design is always more expensive
EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT
EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT Addendum No. 2 Attachment B Contract Document Revisions Specifications: TABLE OF CONTENTS ADDENDUM NO. 2 Attachment B Contract
PROTECTION OF PIPELINE FITTINGS AND VALVES
CI/SfB reference by SfB Agency (59) 1 PROTECTION OF PIPELINE FITTINGS AND VALVES 70 YEARS OF PIPELINE PROTECTION Product and Application Data Flanges Valves Couplings Features Easy to use No skilled labour
SECTION METAL FRAMED SKYLIGHT. A. Engineering, preparation of fabrication drawings and structural calculations for the entire skylight system.
SECTION 08625 METAL FRAMED SKYLIGHT PART 1 GENERAL 1.01 SECTION INCLUDES: A. Engineering, preparation of fabrication drawings and structural calculations for the entire skylight system. B. Fabrication
SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017
![SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017](/thumbs/76/73001868.jpg "SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE. Product. Scope. Appraisal No. 811 [2013] Appraisal No. 811 (2013) Amended 28 August 2017")
SIKALASTIC-152 EXTERIOR WATERPROOFING MEMBRANE Amended 28 August 2017 BRANZ Appraisals Technical Assessments of products for building and construction. Sika (NZ) Ltd PO Box 19 192 Avondale Auckland 1746
TRAY-DEC FLOORING SYSTEM. Product. Scope. Building Regulations. Appraisal No. 841 [2014] Appraisal No. 841 (2014) BRANZ Appraisals
![TRAY-DEC FLOORING SYSTEM. Product. Scope. Building Regulations. Appraisal No. 841 [2014] Appraisal No. 841 (2014) BRANZ Appraisals](/thumbs/78/76969114.jpg "TRAY-DEC FLOORING SYSTEM. Product. Scope. Building Regulations. Appraisal No. 841 [2014] Appraisal No. 841 (2014) BRANZ Appraisals")
TRAY-DEC FLOORING SYSTEM BRANZ Appraisals Technical Assessments of products for building and construction. Product 1.1 The Tray-dec Flooring System comprises Ultra-Span 80, Concrete Saver 60 and Tray-dec
DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS
DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS Peter J. Carrato, William F. Brittle Bechtel Power Corporation, USA Abstract Fossil fueled power-plant projects provide many design
INDIGATECH CERTIFICATION SCHEDULE
INDIGATECH CERTIFICATION SCHEDULE for FORSTER INSULATED GLAZED DOORS & SCREENS UTILISING FUEGO LITE 60 COMPONENTS WITH A RANGE OF EI30 & EI60 GLASS TYPES This Schedule should be read in conjunction with
CI/SfB (23) Suspended Timber Floor Applications Can be used with Floorboards or Tongue & Groove floor paneling Joist end Fitting Aluminium Foil Bubble Insulation General Purpose Insulation Dry Lining Insulation
April Section 5. Basements
April 2012 Section 5 Basements Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice for protection of structures against water from the ground, gives three categories of waterproofing
CONSTRUCTION TROSIL - TROSIL TECH SUPERIOR SOUND PROOFING
CONSTRUCTION TROSIL - TROSIL TECH SUPERIOR SOUND PROOFING trosil - trosil tech TROSIL Sound insulation of new generation, against impact sound, manufactured by TROCELLEN for comfortable and quiet living.
B-1 DIRECT WATERPROOFING APPLICATION TO LAGGING FOLD OVER ARMORCLAY 1000 FOR GRADE LINE TERMINATION VERTICAL GEO-MAT C DRAIN 110 OR 150 FASTENERS
FOLD OVER FOR GRADE LINE TERMINATION C DRAIN 110 OR 150 FASTENERS HORIZONTAL TIEBACK COVER AND MASTIC B-1 DIRECT APPLICATION TO LAGGING C DRAIN 110 OR 150 FASTENERS MEMBRANE BONDED WITH INSIDE AND OVER
NU-WALL EXTRUDED ALUMINIUM CLADDING. Installation Specifications Vertical orientation (over cavity)
September 2014 NU-WALL EXTRUDED ALUMINIUM CLADDING Installation Specifications Vertical orientation (over cavity) 1. NW-V001C; Cavity batten layout 2. NW-V002C; Battening options 3. NW-V002C; Battening
AQUAFIN-2K/M FLEXIBLE CEMENTITIOUS WATERPROOFING
AQUAFIN-K/M FLEXIBLE CEMENTITIOUS WATERPROOFING Typical Waterproofing Specifications Table of Contents: No. 3 4 5 6 7 8 9 3 4 5 6 7 8 9 Waterproofing Specification External waterproofing of CMU or brick
PROJECT SPECIFICATIONS
PROJECT SPECIFICATIONS CITY OF PORTLAND BUREAU OF ENVIRONMENTAL SERVICES PROJECT SPECIFICATIONS FOR ANKENY PUMP STATION UPGRADE BES project number E07833 STANDARD REQUIREMENTS (DIVISION 0) GENERAL REQUIREMENTS
Repair methods of the roofing structures. Mon
Repair methods of the roofing structures Mon 29.02.2016 Course Content Introduction & Conservation The use of ICT for condition assessment of structures Repair of fire damage Repair methods of the roofing
ALKALI-RESISTANT WATERPROOFING AND ANTI-FRACTURE MEMBRANE UNDER CERAMIC TILES, NATURAL STONE AND LVT
Mapeguard WP System ALKALI-RESISTANT WATERPROOFING AND ANTI-FRACTURE MEMBRANE UNDER CERAMIC TILES, NATURAL STONE AND LVT Products used: Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard
Expansion Joint Covers
Expansion Joint Covers 07 95 00 (079513) PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions, Supplementary Conditions and Division-1
THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK
THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK or our breadth of capability. Of all the storage tank manufacturers doing business today, no other offers Caldwell s range of capability. We are the only manufacturer
WETROOM LINEAR FLOOR FORMERS
WETROOM LINEAR FLOOR FORMERS Level Access 30mm Floor Formers Centre Waste Q4-23165 Linear Floor Former 900x900 372 Q4-23166 Linear Floor Former 1200x1200 498 Linear 300 centre drain Level Access 30mm Floor
Waterproofing Systems. Cementitious.
Construction Joint 2 coats Triton TT55 + TTME OR 2 coats @ 0.75 kg/m² per coat Construction Joint 2 coats Triton TT55 OR 1 coat @ 1 kg/m² Screed Reinforced Concrete Waterproofing Systems Cementitious n
CERTIFICATE No VTT-C Date of issue
NAME OF PRODUCT CERTIFICATE No VTT-C-9190-12 Date of issue 3.12.2012 CERTIFICATE HOLDER ACTIS SA Avenue de Catalogne 11300 Limoux France MANUFACTURER ACTIS SA PRODUCT DESCRIPTION is a vapour control multifoil
Easy Drain. INSTALLATION MANUAL Xs - Linear shower drain FOR WOODEN OR CONCRETE SUBFLOORS
Easy Drain Xs INSTALLATION MANUAL Xs - Linear shower drain FOR WOODEN OR CONCRETE SUBFLOORS Easy Drain CONTENTS Installation options... 3 Frame options Xs... 3 Height adjustable feet... 4 Height adjustable
RO02S Bonded Roof Panel
Uniform Procedures For Collision Repair RO02S Bonded Roof Panel Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0 1. Description This procedure describes the repair and complete replacement
ISO INTERNATIONAL STANDARD. Petroleum and natural gas industries Packaged reciprocating gas compressors
INTERNATIONAL STANDARD ISO 13631 First edition 2002-08-01 Petroleum and natural gas industries Packaged reciprocating gas compressors Industries du pétrole et du gaz naturel Unités de compresseurs alternatifs
A. Deliver material to job site in original, nonbroken, factory packaging, labeled with manufacturer's density and thickness.
SECTION 15250 PIPING AND EQUIPMENT INSULATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract including General and Supplementary Conditions, Division 1 Specification
ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE
Mapeguard WP System ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE Products used: Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard WP
Loss Prevention Standard
Loss Prevention Standard LPS 1254: Issue 1.3 THIS STANDARD IS NOT FOR USE IN THE UK AND IRELAND This Loss Prevention Standard is the property of BRE Global Ltd. and is made publicly available for information
A. This section is intended to provide design guidelines for Utility Direct Buried Piping and Conduit Systems.
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to provide design guidelines for Utility Direct Buried
SLAB ON GRADE Insul-Joint or Expansion Joint Material as Required by A/E Specifications AquaCheck Liquid Coating 400 (Waterproofing Membrane) with Aqu
INSTALLATION INSTRUCTIONS Note: The following installation instructions are based off of ASTM E 1643 (Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular
Perma Construction Aids Private Limited
+91-8048762201 Perma Construction Aids Private Limited https://www.permaindia.in/ We are offering waterproofing systems, Tile Adhesive,Waterproofing Coating, Crystallization Based & Elastomeric Waterproofing,
SECTION C. Water Infiltration: Provide manufactured cupolas and dormers that do not allow water infiltration to cupola and dormer interiors.
PART 1 - GENERAL 1.1 SUMMARY A. Section includes the following: 1. Manufactured exterior cupolas. 2. Manufactured dormers. 3. Historical locomotive weather Vane. 1.2 PERFORMANCE REQUIREMENTS A. General:
ISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Hairpin-type heat exchangers
INTERNATIONAL STANDARD ISO 12212 First edition 2012-08-01 Petroleum, petrochemical and natural gas industries Hairpin-type heat exchangers Industries du pétrole et du gaz naturel Échangeurs thermiques
Injection Systems for Concrete Structures. Causes, Remedies and Repairs
Injection Systems for Concrete Structures Causes, Remedies and Repairs Overview - General introduction - Reason for cracks - Different types of cracks - Crack characteristics - Crack investigation and