Sto Interior Finish. for Pool Systems Series 12.xx September ATTENTION

Transcription

1 Sto Interior Finish for Pool Systems Series 12.xx September 2007 building components or assemblies, of for other construction activities beyond Sto s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the building or its components. STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN ACCORDANCE WITH STO S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website,. Property of Sto Corp. All Rights Reserved.

2 Finish Systems: Interior Finish for Pool systems 12.XX Series Details Index Description Detail# Termination at Floor Tile Installation Termination at Dissimilar Material Termination at Metal Deck Termination at Joint Termination at Penetrations 12.70

3 Termination at Floor Detail No.: Install Sto materials as per Sto F Confirm suitability of sealants with sealant manufacturer. Mesh overlap minimum 2.5 (65 mm) Sto finish Casing bead Backer rod and sealant disclaimers, please refer to the Sto Corp. website,.

4 Tile Installation Detail No.: Install Sto materials as per Sto F Install tile as per tile manufacturer s specifications and instructions. Sto finish Tile set in latex modified thin-set mortar disclaimers, please refer to the Sto Corp. website,.

5 Sto Interior Finish Systems for Pool Rooms Termination at Dissimilar Material Detail No.: Install Sto materials as per Sto F Confirm suitability of sealants with sealant manufacturer and supplier of the dissimilar material. Finish Dissimilar construction Backer rod and sealant Casing bead disclaimers, please refer to the Sto Corp. website,.

6 Termination at Metal Deck Detail No.: Metal deck Metal deck closure insert 1] Install Sto materials as per Sto F477 Backer rod and sealant Casing bead Deflection head Sto Mesh Sto finish Structural Support disclaimers, please refer to the Sto Corp. website,.

7 Termination at Joint Detail No.: Extruded vinyl expansion joint 1] Install Sto materials as per Sto F477 2] Install extruded vinyl joints as per manufacturers recommendations. Set joint intersections and terminations in sealant to prevent water penetration behind the joint. Finish Sealant (joint shown cut away) disclaimers, please refer to the Sto Corp. website,.

8 Termination at Penetrations Densshield troweled to opening (note 2) Penetrating element Detail No.: ] Install Sto materials asper Sto F477 2] If no movement is anticipated in the penetrating element, install tightly around element. 3] If movement is anticipated then a bead of sealant should be installed around the penetrating element. Confirm suitability of sealants with sealant manufacturer. Fillet bead of sealant (note 3) Sto finish disclaimers, please refer to the Sto Corp. website,.