West Construction, Inc.

Size: px

Start display at page:

Download "West Construction, Inc."

Mabel Patterson
5 years ago
Views:

1 West Construction, Inc. Presentation prepared for: Broward County Evaluation Committee Wednesday, May 2th, 2018 / 2:00PM 3:00PM / Governmental Center Building, 115 S. Andrews Avenue, Fort Lauderdale, Fl

2 Project Team Broward County Owner/Client West Construction, Inc. & West Architecture + Design, LLC. Design-Builder Don Bell Signs, LLC. Sign Manufacture

Maintenance of Traffic MOT will be required to condense garage entrance traffic to one lane using the easternmost lane entering the garage during working hours.

3 Maintenance of Traffic MOT will be required to condense garage entrance traffic to one lane using the easternmost lane entering the garage during working hours. Additional MOT may be required along the northeast side of the garage where the flatbed truck will be staged for unloading. MOT will be broken down on a daily basis, if required.

Staging We are committed to minimal disruptions of airport operations. In order to do this, we plan to utilize the elevated deck near the garage entrance for all staging/installation.

4 Staging We are committed to minimal disruptions of airport operations. In order to do this, we plan to utilize the elevated deck near the garage entrance for all staging/installation. The crane truck and 125 boom lift will be unloaded and staged in the lift and work area. Approximately 40 on the northeast side of the building will be used for flatbed delivery and unloading, while the east side near the entrance will be where the 125 boom lift,crane truck and light tower will be staged.

Proposed Materials Principal LED lighting are high quality LED sign components that with stand the harsh conditions of Florida and has held up very well the 8 years we

We only use 5052 strength structural aluminum or steel framing that will not rust since we prep, prime and paint the steel with marine grade primer.

5 Proposed Materials Principal LED lighting are high quality LED sign components that with stand the harsh conditions of Florida and has held up very well the 8 years we have been using the product. We only use 5052 strength structural aluminum or steel framing that will not rust since we prep, prime and paint the steel with marine grade primer. We use non corrosive hardware that will not rust in the tough Florida environment. The plastic we use is Plaskolite, a leading brand of plastics in the sign industry. Vinyls we use 3M film products. Paints Matthews automotive paint with a 5 step paint process, 1 primer, 2 coats of paint, 2 coats of clear coating protection.

Ease of Maintenance Serviceability: Our team designer will have pre design meetings with Don Bell Sign s production team to make sure we are placing the lighting components in a waterproof area that

We build access doors that are flush to the back or return (side) of the sign cabinet with counter sunk screws that won t be visible from the ground.

6 Ease of Maintenance Serviceability: Our team designer will have pre design meetings with Don Bell Sign s production team to make sure we are placing the lighting components in a waterproof area that can be easily accessible to service in the future. Power supplies that power the LED s are usually the first to go out years down the road and we make sure they are accessible by roof or bucket truck. We build access doors that are flush to the back or return (side) of the sign cabinet with counter sunk screws that won t be visible from the ground. Cleaning: we suggest an annual cleaning of the sign by the sign vendor or airport maintenance crew. This consists of light pressure washing with water hose and ivory soap. The idea is similar to washing a car. A light wax is not necessary but it would be good to do if not annually, then at least every two years. This will protect your investment for many more years, similar to a car s finish.

7 Our teams focus on accurate scheduling enables our projects to run efficiently. We have a detailed and experienced scheduling staff, with the ability to successfully plan the work of all parties involved and coordinate the many activities that simultaneously take place. During the setting of the final schedule the superintendent and key sub-contractors are consulted to insure that lead time for specified equipment is adequate and that the interaction of trades is adequately coordinated. Our schedule is as follows: Design 2 weeks Engineering 1 week Permitting process 2 weeks Ordering materials 1 week Fabrication 11 weeks Installation 1.5 weeks Completion checklist 2 days Total estimated time Schedule (+/-) 19 weeks

561-588-2027 / CGC 1516626 / CBC 05038 / AA

Understanding of the Importance of Schedules

8 Why the WEST Team? 820 N 4 th St, Lantana, FL / / CGC / CBC / AA Team Approach No Learning Curve Personal Involvement by Principals Understanding of Project and Logistics Understanding of the Importance of Schedules Award Winning Team Long History of Performance on Projects Team with Proven Experience Local Office

9 Thank you for your time! Questions and answers?

Prequalification Form

Prequalification Form 1.0 General Information Date: 1.1 Name of Firm _ County Telephone Toll Free Fax Website _ for Bid Purposes: Name Phone 1.2 Legal Identity: Sole Proprietorship Partnership Corporation Limited Liability