C O M M E R C I A L A R C H I T E C T U R A L

Size: px

Start display at page:

Download "C O M M E R C I A L A R C H I T E C T U R A L"

Ursula Mathews
5 years ago
Views:

Series 466 Awning / Casement Window C O M M E R C I A L A R C H I T E C T U R A L DESIGN FEATURES This 102mm thick commercial grade awning window has been designed with bold frame lines and thick

1 Series 466 Awning / Casement Window C O M M E R C I A L A R C H I T E C T U R A L DESIGN FEATURES This 102mm thick commercial grade awning window has been designed with bold frame lines and thick (strong) sashes that can carry heavy glass including 24mm thick double glazing. The perimeter frame has been designed to make installation into brick veneer and cavity brick easier with built-in nailing fins (weather bars). The sub-sill that comes with this window also has a built-in nailing fin. This high performance awning and casement window system has been designed around custom frame and sash extrusions. The extra strong sashes allow large sash windows to be fabricated for high wind load areas. Splayed or square glazing beads available. Awning sashes can be fitted with cam handles, manual chain winders or concealed electric winders. The winder options suit fixed fly screen installation. Our heavy duty chain winder comes standard with non corrosion Polesium base and stainless steel chain. Fixed lowlights/sidelights can be single or double glazed. Sashes are hung on heavy duty four bar stainless steel or aluminium stays. Maximum Panel Height 1800mm Maximum Panel Width 1210mm Maximum Glass Thickness 24mm Subject to individual site conditions. Contact AWS Technical Support for more information. WERS RATED PRODUCT ENHANCED ACOUSTIC PERFORMANCE Sashes will accept a variety of glass thicknesses from 4mm single panes to 24mm insulating glass units. Two non-facing (recessed) sash designs cover internal and external glazing, The nailing fin frames are suitable for brick veneer and cavity brick wall installations. Two jamb sizes 30mm standard or alternative 44mm wide. 3D & 2D CAD FILES AVAILABLE PRODUCT INFORMATION AVAILABLE AT SPECIFIER ASSISTANCE AVAILABLE Photo courtesy of DLG Aluminium & Glazing

Series 466 Awning Window 01.09 A major feature with Series 466 is the frame with in-built nailing fin (weather bar).

The standard jamb is 102 x 30mm as shown above, we also offer 102 x 44mm jamb and again with the nailing fin feature.

The sashes are 40mm thick, recessed into the frame as illustrated and can be beaded/glazed from the inside as shown or alternatively from the outside.

These corrosion resisting features make the winder suitable for exposed locations. 10 Year manufacturers warranty. We also fix the winder to the frame and sash through thickened area.

2 Series 466 Awning Window A major feature with Series 466 is the frame with in-built nailing fin (weather bar). This makes installation into cavity brick with height adjustable building-in lugs and into brick veneer walls with timber reveals as shown above possible. The standard jamb is 102 x 30mm as shown above, we also offer 102 x 44mm jamb and again with the nailing fin feature. Nailing fins may not sound that important but this built-in weather bar is what stops water traveling from the outer brick skin to the inner wall. The sashes are 40mm thick, recessed into the frame as illustrated and can be beaded/glazed from the inside as shown or alternatively from the outside. We can use square or splayed beads if glazed on the outside. The standard chain winder used on Series 466 comes standard with stainless steel chain and Polesium cover and base. These corrosion resisting features make the winder suitable for exposed locations. 10 Year manufacturers warranty. We also fix the winder to the frame and sash through thickened area. Series 466 sashes are hung on heavy duty four bar stays aluminium or stainless steel. 2D & 3D CAD Files Available GO TO: > CAD & Revit 3D Files CAD file: DWG or DXF AWS_466_1 MORE INFORMATION For the latest updates regarding this product visit our web site Sub-sills are standard on Series 466. The sub-sill has several significant features: Full flashing tray guides any water that gets into the window back to the outside. Our custom sub-sill designed for cavity brick and brick veneer construction has built-in nailing fin to allow sill timber reveal fixing. The PVC flap on the outer edge of the sub-sill caters for stud wall settlement on brick veneer construction. Sub-sill fitted with co-extruded Santoprene drain hole cover flap to prevent blow back under extreme situations. Sub-sill is also stop ended to guide water back to the front.

Series 467 Awning / Casement Window COMMERCIAL ARCHITECTURAL DESIGN FEATURES This high performance awning and casement window has been designed to accept Truth Hardware.

3 Series 467 Awning / Casement Window COMMERCIAL ARCHITECTURAL DESIGN FEATURES This high performance awning and casement window has been designed to accept Truth Hardware. This allows us to offer very large casements and awnings fi tted with scissor type winders with jamb to stile latches that secure the sashes in the closed position. The extra strong sashes allow large sash windows to be fabricated for high wind load areas. Successfully tested to resist 450Pa water. Fixed sidelights/lowlights and highlights can be single or double glazed. The perimeter frame has been designed to make installation into brick veneer and cavity brick easier with built-in nailing fins (weather bars). The sub-sill that comes with this window also has a built-in nailing fi n. Maximum Panel Height Maximum Panel Width Maximum Glass Thickness 2100mm 1200mm 24mm The Truth hardware can resist very high negative wind loads with the use of winders and side latches. Subject to individual site conditions. Contact AWS Technical Support for more information. Series 467 accepts fl yscreens that tuck into head and sill recess. WERS RATED PRODUCT On casements it s possible to clean the external glass face when the sash is in the 90 open position. The nailing fin frame has several important features that are worth highlighting: Built-in nailing fin is more waterproof. Frame accepts height adjustable galvanised M.S. buildingin lug. Sub-sill has external recess to accept PVC sill fl ap. Sub-sills are standard on Series 467, see the illustration on the back page. ENHANCED ACOUSTIC PERFORMANCE 3D & 2D CAD FILES AVAILABLE PRODUCT INFORMATION AVAILABLE AT SPECIFIER ASSISTANCE AVAILABLE Photo courtesy of Portland Aluminium & G;ass

Series 467 Awning Window 01.09 A major feature with Series 467 is the frame with in-built nailing fi n (weather bar).

The sashes are 50mm thick and will accept glass from 4mm to 24mm thick. The Truth scissor winder is designed to support heavy sashes in the open and closed positions.

You won t see this feature but it s good to know the corners will stay tight even under extreme conditions. 2D & 3D CAD FILES AVAILABLE GO TO: www.awscomm

4 Series 467 Awning Window A major feature with Series 467 is the frame with in-built nailing fi n (weather bar). This makes installation into cavity brick with height adjustable building-in lugs and into brick veneer walls with timber reveals as shown above possible. The standard jamb is 102 x 30mm as shown above, we also offer 102 x 44mm jamb and again with the nailing fin feature. Nailing fins may not sound that important but this built-in weather bar is what stops water traveling from the outer brick skin to the inner wall. The sashes are 50mm thick and will accept glass from 4mm to 24mm thick. The Truth scissor winder is designed to support heavy sashes in the open and closed positions. The handle folds bock into the winder body when not in use, as shown above. The key to making strong sashes is fi tting heavy duty corner stakes. You won t see this feature but it s good to know the corners will stay tight even under extreme conditions. 2D & 3D CAD FILES AVAILABLE GO TO: > CAD & Revit 3D Files CAD file: DWG or DXF AWS_467_1 MORE INFORMATION For the latest updates regarding this product visit our web site Sub-sills are standard on Series 467. The sub-sill has several signifi cant features: Full fl ashing tray guides any water that gets into the window back to the outside. Our custom sub-sill designed for cavity brick and brick veneer construction has built-in nailing fi n to allow sill timber reveal fi xing. The PVC fl ap on the outer edge of the sub-sill caters for stud wall settlement on brick veneer construction. Sub-sill fi tted with co-extruded Santoprene drain hole cover fl ap to prevent blow back under extreme situations. Sub-sill is also stop ended to guide water back to the front.

Product Information Sheet Commercial Series Series 456 Commercial Awning Window Overview Series 456 incorporates the basic residential awning sashes into bold square commercial framing with dedicated

Dedicated head and sill to accept awning sashes with manual chain winders with Standard 30mm or alternative 44mm nailing fin jambs.

5 Product Information Sheet Commercial Series Series 456 Commercial Awning Window Overview Series 456 incorporates the basic residential awning sashes into bold square commercial framing with dedicated head, sill and jamb adaptors. A popular choice in both residential and commercial building applications. Key Features Residential awning sashes inlaid directly into shopfront framing. Dedicated head and sill to accept awning sashes with manual chain winders with Standard 30mm or alternative 44mm nailing fin jambs. We also have a double glazed 44mm nailing fin frame for those projects with double glazed fixed lights. Complies with AS2047, with a high water resistance of 450Pa. With a very low air infiltration that makes this product suitable for air-conditioned buildings. Besides the standard manual chain winders the awning sashes can be fitted with concealed electric chain winders or cam handles. Flyscreens can be fitted behind awning sashes with winders. Wrap around light sashes will accept glass up to 6.76mm thick, we also have wrap around sashes that will accept 20mm IGU s. The heavy duty beaded sash will accept glass from 4mm to 20mm thick. Fixed lowlights can be glazed from the inside in elevated situations by reversing the removable glazing beads. Maximum Panel Height 2100mm Maximum Panel Width 1210mm Maximum Glass Thickness 20mm Subject to individual site conditions. Contact AWS Technical Support for information. Fixed lights can be single or double glazed with glass with glass up to 24mm thick. Nailing fin frame makes the product suitable for cavity brick and brick veneer construction. Dedicated 90 and 135 couplers. 3D & 2D CAD FILES AVAILABLE PRODUCT INFORMATION AVAILABLE AT SPECIFIER ASSISTANCE AVAILABLE techsupport@awsaustralia.com.au

Standard 30mm nailing fin frame standard

6 Product Information Sheet Series 456 windows come standard with integrated sub-sill. Sashes hang on built-in hook hinges. Standard 30mm nailing fin frame standard or alternative 44mm wide jamb. Custom stainless steel ICON cam handles available for casement sashes. For the ultimate finish we can fit concealed electric winders. Manual chain winders are standard on Series 456 awning sashes. Typical Configurations Awning Style Casement Style

Series 466 Architectural Awning Window

Series 466 Architectural Awning Window Series 466 ARCHITECTURAL SERIES Photo courtesy of Hanlon Windows Australia. Project: Nowra Anglican College. DATE: MAY 2013 REPLACES: MARCH 2008 ARCHITECTURAL SERIES Series 466 KEY FEATURES/PERFORMANCE