Exuding irrigation system

Transcription

1 Exuding irrigation system

2 POROUS HOSE FOR DRIP IRRIGATION VISA REG is a revolutionary exuding irrigation system formed by a technical textile hose which produces a continuous and uniform controlled flow of water throughout its length and surface. A product made with top quality materials, meeting the highest safety standards. Its 100% porous composition allows natural low pressure gravity fed irrigation or the use of pressure irrigation installations. VISA REG gives a stable flow, regardless of the working conditions. VISA REG is unaffected by temperature changes and other bad weather conditions, which cause no variation in the irrigation line. Thanks to its flexible structure and its pores it is not blocked by lime, is able to work on the surface or underground and constantly and stably oxygenates the soil. ECOLOGICAL Efficient and sustainable: energy savings 5 GREAT DURABILITY Five-year guarantee on use and operation TOTALLY FLEXIBLE Not blocked by chalk laden waters EASY TO INSTALL The simplest irrigation system with the smallest assembly cost

3 FEATURES ECOLOGICAL IRRIGATION SYSTEM - Maximum irrigation efficiency, saving water and energy. - Made in non-toxic materials. - Reusable. WATER SAVINGS OF BETWEEN 50% AND 60% IN COMPARISON WITH OTHER IRRIGATION SYSTEMS - Allows 100 m lines to be installed and fed from just one end. - Or 200 m lines fed from both ends of the VISA REG hose. - Maximum working slope of 2% to 3% of the irrigation lines. - On steep land, the pressure may need to be adjusted for even irrigation. WORKS AT LOW PRESSURE WITHOUT PUMPS OR DEVICES - No energy costs. - Also suitable for use in pressure installations. - Recommended working pressure 0.2 to 1 bar. O2 LEAVES SOIL SPONGY AND OXYGENATED - Permanent, controlled and uniform moisture. - Can be installed on the surface, covered or underground. FILTRATION NOT NEEDED WITH DRINKING WATER - For non-drinking waters, 130 to 150 micron (120 to 100 mesh) filters recommended. COMPATIBLE WITH FERTILISERS AND PLANT CARE PRODUCTS -Allows water-soluble fertilisers and plant care products to be supplied through the irrigation installation.

4 FEATURES LIGHT, FLEXIBLE, STRONG AND 100% POROUS STRUCTURE - Its flexibility avoids the danger of lime blockage. - Made in materials resistant to abrasion, UV rays and the weather. - Resistant to traction breakage up to 150 kg bar maximum bursting pressure. - Unaffected by changes in temperature, no variation in the irrigation line. - Weather-resistant, unalterable in length and uniformity. - Wind does not affect water distribution. LOWER INSTALLATION COST COMPARED WITH OTHER SYSTEMS - Easy to handle, pack and transport. - Not bulky. 5 VISA REG GUARANTEE - Technical textile system made in Europe. - 5-year guarantee on operation. USES STANDARD 16 MM ACCESSORIES - Adaptable and compatible with any existing installation. - Standard interior diameter of approximately 16 mm. - Compatible with all 16 mm market accessories.

5 THE REAL DROP BY DROP SYSTEM WITH A WORLD PATENT VISA REG s leading technology is present in many installations around the world. The whole of the VISA REG product range is available wherever the order is placed. VISA REG is part of VENTAS INTERNACIONALES S.A., today one of the largest import and export companies on the Spanish market. Now running for more than 30 years, VENTAS INTERNACIONALES S.A. continues to work on different lines of products and materials, applying the most demanding European standards in all of its processes. Our commitment to quality focuses on research and innovation to offer our customers real and effective solutions. The correct operation of VISA REG is guaranteed for 5 years provided the technical working requisites are met and the system has not been subject to mechanical aggression. VENTAS INTERNACIONALES S.A. waives all responsibility for the malfunctioning of the VISA REG system caused by incorrect installation or failure to adapt to the standards reflected in the technical manual of use. For further information and range of installations, consult the VISA REG technical manual or our specialists via the website 5 YEAR GUARANTEE

6 ASSEMBLY SYSTEM Any VISA REG irrigation system can be easily and safely installed in just a few simple steps, regardless of its length or complexity. Pressure supply Gravity supply 1/ Assembly elements 2/ Polyethylene pipe perforated with a punch TPR-7 3/ Presentation of simple tap connections 4/ Connection of the VISA REG line ends TBC A TS-16 VM-16 TS-16 5/ Cutting the VISA REG hose 6/ Connecting the VISA REG to accessories VM-16 7/ Accessory clamp connection 8/ VISA REG line end plug CAE-16 TP-16

7 VISA REG Red Mesh Larger flow Special Farming VREGTUB - 16MR 4 to 8 litres h/m. Approximate values under working conditions of 0.2 to 1 bar. 15 metres 25 metres 50 metres 100 metres 200 metres VISA REG Green Mesh Smaller flow Special Gardening VREGTUB - 16MV 2 to 4 litres h/m. Approximate values under working conditions of 0.2 to 1 bar. 15 metres 25 metres 50 metres 100 metres 200 metres 200 m. 100 m. 50 m. 15 m. 25 m.

8 INSTALLATION ACCESSORIES CAE - 16 Pressure clamp 16 mm Recommended by VISA REG. A double toothed safety clamp for perfect connection with the irrigation accessory. Material highly resistant to the weather and UV rays (sun). Seals the VISA REG hose correctly around the connection with standard accessories. TS - 16 Simple tap 16 mm A graft type tap for connecting VISA REG hose to polyethylene supply pipes. Use Ref. TPR-7 borers for clipping. MU - 16 Coupling 16 mm For connecting sections of VISA REG irrigation lines or sections of 16 mm polyethylene pipe. Also useful for connecting VISA REG irrigation lines with 16 mm polyethylene pipe. VM - 16 Valve 16 mm VM /2 Valve 16 mm with 1/2 male threaded connection CD elbow 16 mm DT - 16 T-joint 16 mm A water valve for the beginning of VISA REG lines at the connection with the 16 mm polyethylene pipe. A water valve for the beginning of VISA REG lines and connection with a 1/2 female threaded socket. An ideal accessory for combining with Ref. CR-16 and Ref. ME- 16-1/2 H. For 90 derivations in VISA REG irrigation lines and 16 mm polyethylene pipe. For T-joints in VISA REG irrigation lines and 16 mm polyethylene pipe.

9 INSTALLATION ACCESSORIES TP - 16 Plug 16 mm TP - CO Collar plug TC - 25/16 y TC - 32/16 Tapping clamp 32 x 16 mm ME - 16 Threaded coupling 1/2 16 mm A plug to close the end of VISA REG irrigation lines. For use with CAE-16 pressure clamp. A plug to close the ends of VISA REG irrigation lines in installations that need to be periodically purged due to accumulated dirt. A collar for 25 mm or 32 mm polyethylene pipe with 16 mm connection for VISA REG or 16 mm polyethylene pipe. 1/2 threaded male coupling with connection to VISA REG irrigation lines or 16 mm polyethylene pipe. ME /2H 1/2 vector tap 16 mm A threaded 1/2 female coupling for connecting to VISA REG hose or 16 mm polyethylene pipe. Example: taps or small tanks, possibility of combining with 16 mm valve VM-16-1/2. TPR mm punch for 16 mm simple tap An accessory for perforating the polyethylene supply pipe and for inserting a simple 16 mm tap. ALMA Semi-rigid core 6 mm Recommended for tree irrigation. Inserted inside the VISA REG line to be bent without folding and to form rings around the trunk. Ideal for lines with small bends, vertical gardens and other installations. VISA REG + ALMA VISA REG exuding hose with interior core for making rings and avoiding folds in simple bends.

10 INSTALLATION ACCESSORIES TSM Simple tap 5 mm microtube TPR - 3E 3 mm mini punch for microtube TPR mm punch for microtube MICROTUBO PVC Microtube An accessory to insert in the polyethylene supply pipe at the point where the microtube is to be connected. A special accessory for assembling irrigation in flowerbeds. An accessory for perforating the polyethylene supply pipe and inserting a simple tap for connecting the microtube. Special for fitting in flowerpots and small installations. An accessory for perforating the polyethylene supply pipe and inserting a simple tap for connecting the microtube. A special accessory for fitting in flowerpots. An accessory for sending the water from the polyethylene supply pipe to the VISA REG exuding hose. A special accessory for fitting irrigation in flowerpots DTM T-joint 5 mm for microtube VJM Valve microtube 5 mm TSV - 16 Simple tap vector 5x16 mm PM Clip for microtube To make t-joints in the microtube. A special accessory for fitting irrigation in flowerpots. A water valve that has to be connected at the point where the microtube reaches the flowerpot to regulate the water flow. A special accessory for fitting irrigation in flowerpots. An accessory for connecting the microtube to the VISA REG exuding hose. A special accessory for fitting irrigation in flowerpots. A clip to fix and hold the VISA REG exuding hose at the connection with the microtube to the flowerpot.

11 INSTALLATION ACCESSORIES CR - 16 Fast tap with 3/4 and 1/2 threaded connection CR - MANGUERA - H Fast connection garden hose MU - GARDEN Garden connection tap RP - 0.7B Pressure regulator 0.7 bar A threaded connection for taps with 3/4 to 1/2 thread reducer. An automatic element for connecting the flexible hose to the CR-16 accessory. A fast connection tap for garden hose. A pressure regulator for use in farming and gardening irrigation installations with VISA REG. 3/4 H x 3/4 H threaded connection. GSL-2.5 Manometer 2.5 bar A glycerine manometer from 0 to 2.5 bar pressure. 1/4 male threaded gas connection. VENTURI-5 Fertiliser injector with flowmeter and doser No maintenance required. This works without any kind of energy, simply with the pressure of the irrigation network. It may be used in series in the network (small flows) or in parallel to form a by-pass (large flows). Programador-2D Analogue irrigation programmer for 3/4 tap This works by gravity or pressure in manual or automatic mode. Automatic and programmable. Battery LED included. Operating pressure 0 to 6 bar. Programador-2D-Plus Analogue irrigation programmer for 3/4 tap WATERPROOF This works by gravity or pressure in manual or automatic mode. Automatic and programmable. Battery LED included. Operating pressure 0 to 6 bar.

12 INSTALLATION ACCESSORIES TBC A Polyethylene pipe 16 mm ø Water supply pipe, NON- POROUS, low pressure 2.5 bar. TBC A TBC A Polyethylene pipe 25 and 32 mm ø Water supply pipe, NON- POROUS, low pressure 4 bar. VM - 25 y VM - 32 Valve 25 mm or 32 mm without connection joints. VM-25-PE y VM-32-PE Valve 25 mm or 32 mm with connection joint. CD - 25 y CD º elbow of 25 or 32 mm DT - 25 y DT - 32 T-joint of 25 or 32 mm Water valve 25 mm or 32 mm. Use MUR-25-3/4 or MUR-32-1M accessories for connecting to polyethylene pipe. Water valve 25 mm or 32 mm. Including joints for connection to polyethylene pipe. For 90º joints in 25 mm or 32 mm ø polyethylene pipe. For T-joints in 25 mm or 32 mm ø polyethylene pipe.

13 INSTALLATION ACCESSORIES MU - 25 MU - 32 Straight connection of 25 or 32 mm For connecting two sections of 25 or 32 mm ø polyethylene pipe. TP - 25 TP - 32 Plug 25 or 32 mm An end plug for 25 or 32 mm ø polyethylene supply pipe. MUR /4 H MUR H Threaded H 25 or 32 mm A mixed connector with female thread on one end and connector for 25 or 32 mm ø polyethylene pipe on the other. MUR /4 M MUR M Threaded M 25 or 32 mm A mixed connector with male thread on one end and connector for 25 or 32 mm ø polyethylene pipe on the other. RMH - 3/4-1/2 Reduction 3/4 M 1/2 H Threaded connection. Male reduction 3/4 to female 1/2. MUM - 3/4 Connecting tap male 3/4-3/4 MUM - 1-3/4 Reduced connecting tap male 1-3/4 MUM - 1-1/2 Connecting tap male 1-1/2 MR - 3/4H - 1/2H Reduced connecting tap female 3/4-1/2 Threaded connection. Male 3/4. Threaded connection. Male 1-3/4. Threaded connection. Male 1-1/2. Reduced female threaded connection 3/4-1/2.

14 SPECIALISED IRRIGATION KITS KIT - HORT KIT VEGETABLE GARDEN 025 For 12 m2 vegetable garden CR-16 Part 1 A set for small family type vegetable gardens. Contains all of the necessary elements for setting up in garden or on small plots. ME-16 CR-16 Part 2 VM-16 VREGTUB - 16MR 25 m VISA REG + 39 accessories CD-16 Content: 25 m of VISA REG irrigation system [VREGTUB - 16MR] 1 Fast threaded tap 3/4 1/2 [CR-16] 1 Threaded main connection 1/2 16 mm [ME-16] 4 T-joints 16 mm [DT-16] 3 90º Elbows 16 mm [CD-16] 5 Valves 16 mm [VM-16] 10 Pressure clamps 16 mm [CAE-16] 5 Standard plugs 16 mm [TP-16] 5 m of polyethylene supply pipe 16 mm ø 5 Sections of 15 cm of polyethylene supply pipe of 10 cm 16 mm ø TBC A DT-16 CAE-16 TP-16 Assembly diagram KIT - SETOS KIT HEDGES 015 For a line of 15 m VISA REG A special set for hedges. Contains all of the necessary elements for conditioning and supplying lines of hedges. 15 m VISA REG + 14 accessories Content: 15 m of VISA REG irrigation system [VREGTUB - 16MV] 1 Fast threaded tap 3/4 1/2 [CR-16] 1 Threaded main connection 1/2 16 mm [ME-16] 1 Valve 16 mm [VM-16] 1 Connection tap 16 mm [MU-16] 3 90º Elbows 16 mm [CD-16] 1 Standard plug 16 mm [TP-16] 6 Pressure clamps 16 mm [CAE-16] 5 m of polyethylene supply pipe 16 mm CR-16 Part 1 ME-16 CR-16 Part 2 CAE-16 TB A VM-16 MU-16 VREGTUB - 16MV CD-16 TP-16 Assembly diagram

15 SPECIALISED IRRIGATION KITS KIT JARDINERA KIT 3 FLOWERPOT Irrigation for 3 flowerpots with VISA REG A set for a block of 3 flowerpots. Contains all of the necessary elements for growing plants in flowerpots. 3 m VISA REG + 32 accessories Content: 3 m of VISA REG [VREGTUB - 16MV] 1 Fast threaded tap 3/4 1/2 [CR-16] 2 Threaded main connections 1/2 16 mm [ME-16] 1 Pressure regulator 0.7 bar [RP-0.7B] 3 90º Elbows 16 mm [CD-16] 1 Mini punch 3 mm [TPR-3E] 3 Single microtube taps 5 mm [TSM] 5 m PVC microtube 3 Microtube valves 5 mm [VJM] 3 Clips for microtube [PM] CD-16 3 Simple vector taps 5 x 16 mm [TSV-16] 4 Standard plugs 16 mm [TP-16] 6 Pressure clamps 16 mm [CAE-16] 2 Reductions male-female 3/4 M 1/2 H [RMH-3/4 1/2] 5 m polyethylene supply pipe 16 mm Connection options CAE-16 ME-16 RMH 3/4-1/2 RP-0.7B CR-16 Part 1 CR-16 Part 2 TBC A VREGTUB - 16MV PM TSV-16 Microtube VJM TSM Assembly diagram TP-16 TPR-3E KIT ÁRBOLES KIT 2 TREES Irrigation for 2 trees with VISA REG A set for tree irrigation. Contains all of the necessary elements for growing trees in vegetable garden or garden. CR-16 Part 1 Assembly diagram ME-16 CR-16 Part 2 4 m VISA REG + 21 accessories Content: 4 m of VISA REG + ALMA irrigation system 1 Fast threaded tap 3/4 1/2 [CR-16] 1 Threaded main connection 1/2 16 mm [ME-16] 2 90º Elbows 16 mm [CD-16] 4 T-joints 16 mm [DT-16] 2 Valves 16 mm [VM-16] 4 Pressure clamps 16 mm [CAE-16] 1 Standard plug 16 mm [TP-16] 5 m polyethylene supply pipe 16 mm 4 Sections of 10 cm of polyethylene pipe 16 mm TBC A CAE-16 VISA REG + ALMA VM-16 DT-16 CD-16

16 C/ d Anoia, Rubí - Barcelona - España Tel Fax VISA REG is part of VENTAS INTERNACIONALES S.A.