Mixed penetration seal for cables and pipes PROMASTOP -CC. Technical data

Transcription

1 EI Detail A Mixed petration seal in flexible wall and rigid wall Detail B Mixed petration seal in rigid floor Technical data Stone wool, in acc. Table 3 3 PROMASTOP -FC PROMASTOP -W 5 Filling material depding on Detail 6 PROMASTOP -IM CJ 7 Cable Supporting construction, in acc. Table Plastic pipe 0 Non-combustible pipe material Threaded rods Backfilling material 3 Idtification label Certificate: CR No Advantages: Seal size up to 3,75 m² in tested Wall and Floor Moisture resistant Wet film thickness 0, mm on Stone wool boards (=Dry film thickness of 0,7 mm) Detail A/B - Overview mixed petration seal Titles Description Fire stopping coating. Installation procedure. Aperture framing 3. Field of application. Cable petration seal 5. Non-combustible pipes with non-combustible insulation 6. PROMASTOP -IM CJ Fire stopping jacket 7. PROMASTOP -FC Fire stopping collar. PROMASTOP -W Fire stopping wrap. Aluminium plastic composite pipe 0. Non-combustible pipes with combustible insulation. Installation procedure Build a aperture framing in flexible walls, as shown in (Detail D) The boards must be made of non-combustible stone wool (A acc. to EN 350-) with a melting point of 000 C and a dsity of 0 kg/m³, The amount of layers dept on the fire resistance (Table 3) The distance betwe the stone wool boards may be: 0 mm The firestop coating must be applied on the outer surfaces, all cutting edges and board joints Remaining gaps are filled with stone wool and coated with fire stop coating or filled with PROMASEAL -A It is not necessary to paint the adjact wall and floor construction Secure the floor petration seal against step on Affix the idtification label 507e0dcef7b53fa7a600ce File 06-05

2 EI 0 Detail C There are 3 possibilities shown in Detail C shown, how to build in the petration seal in floor and wall constructions. flush to the upper edge of the floor flush to the lower edge of the floor both stone wool boards flush to the upper and lower edge of the floor Detail C Possible positions of the stone wool boards framing Detail D Aperture framing of the flexible wall framing Table Supporting construction and maximum seal size: Separating elemt Flexible wall 00 mm Rigid wall 00 mm Thickness of the stone wool board x 50 mm x 0 mm x 50 mm,0 m² Rigid floor 50 mm,5 m² 3,75 m². Aperture framing Detail D The petration seal my be build into walls and floors according table. For flexible walls there are the following possibilities for the aperture framing: The existing metal stud is used, additional metal studs shall be added to create a circulating metal frame Without the metal stud but with minium layer of the flexible wall lining in the aperture With the metal stud and minimum layer of the flexible wall lining in the aperture 3. Field of application Table In table are the maximum tested and certified petration seal sizes shown, depding on the installation situation. The maximum sizes may not be exceeded. Flexible wall constructions The wall must a thickness of 00 mm and be made from wood or metal studs which are lined on both sides with minimum layers of minimum,5 mm thick fire protective boards (other board thicknesses shall be permissible, please note minimum thickness). For timber stud walls, a minimum distance of 00 mm must be kept from each of the wood stud to the sealing and the cavity betwe studs and sealing must be filled with a least 00 mm insulation material compliant to class A or A (in acc. EN 350-). An additional framing with boards of the oping is not necessary. Rigid wall constructions (Aerated concrete, concrete, reinforced concrete, masonry,...): The rigid wall must have a thickness 00 mm and a dsity of 50 kg/m³. The results achieved using a standard rigid supporting construction are valid for separating construction products of concrete or masonry having a similiar or higher thickness and dsity as the tested ones. The classification results from flexible wall constructions may be also applied to rigid wall constructions in case the thickness and dsity is higher than those of the tested construction. 507e0dcef7b53fa7a600ce File

3 EI 0 Table 3 Tested and certified stone wool boards: Manufacturer Rockwool Knauf Insulations Paroc OY AB Isover Type RP-XV, Hardrock II, Rockwoll 360, Taurox D-C, Taurox Duo NP, Rockwool Paneel 755 Knauf Insulations DP-5, Knauf Insulations FDB D50 Pyrotech slab 0 0, Paroc Pro Roof slab Orsil T-N. Cable petration seal with Detail E Cable petration seal in flexible wall and rigid wall Detail F Cable petration seal in rigid floor 7 7 Rigid floor constructions (Aerated concrete, concrete, reinforced concrete,...) The rigid floor must have a thickness of 50 mm and a dsity of 50 kg/m³. Table 3 The system tested and certified stone wool boards (Dsity 0 kg/m³, melting point 000 C, A according EN 350- ) are listed in table 3. Detail E/F Cables, cablebundles, conduits, bundle of conduits, empty pipes, cable trays and cable ladders may pass trough the petration seal in wall and floor. Up to a diameter of 00 mm of cable bundles, there is no need additional seal, the coating with (acc. table ) is ough. Table As shown in table, mm wet film thickness shall be applied to cables of the cable group -5, cable trays and cable ladders. The lgth of the coating is 00 mm, measured from the surface of the petration seal. Specim of the cable group 6 need a coating thickness of 3 mm. Table Coating thickness and coating lgth Object Wet film Lgth of the thickness coating (mm) (mm) Cable group 5 Cable group 6 3 Cable trays, cable ladders, Supporting distance The cables, cable bundles, cable trays, and cable ladders must be suspded 50 mm on both sides from walls or on the top of floor constructions. Table 5 Table 5 shows the fire resistance classification of the cable groups, depding on the petration seal version. 507e0dcef7b53fa7a600ce File The retrospective installation in the petration seal is possible, if all application guidelines are followed

4 EI 0 Table 5 Fire resistance class of the cable groups depding on the petration seal structure Thickness and oritation of the stone wool boards Electrical installation x 50 mm x 0 mm x 50 mm Wall Floor Wall Floor Wall Floor CG: All sheated cable types Ø mm EI 0 CG: All sheated cable types < Ø 50 mm CG3: All sheated cable types 50 < Ø 0 mm CG: Cable bundle made of cables of CG (telecommunication cables) Ø 00 mm CG5: Non sheated cable types Ø mm EI 5 EI 60 EI 60 CG6: Small conduits and tubes, made of plastic or steel with pipe d configuration U/C 6 mm CG Cable group according EN 366-3:00 5. Petration seal of non-combustible pipes with non-combustible insulation with Detail G Metal pipe petration seal in rigid floor 0 Detail H Metal pipe petration seal in rigid wall 0 EI 60 EI 60 EI 60 EI 0 EI 0 Detail G Non-combustible pipes can be sealed with a section insulationmade of stone wool (Melting point 000 C, A/ A L EN 350- or higher rated). The required lgths and thicknesses are shown in the diagram. These are depding on the pipe diameter, the pipe wall thickness and the pipe type (steel, copper or their substitutes). Detail H The insulation (case LS) shall be placed in the cter of the supporting construction or the petration seal and fixed with steel wire (minimum thickness 0,6 mm). The insulation lgth is shown in the table and. The insulation case LS covers: CI, CS, LI and LS. EI 0 EI 0 EI 5-U/C EI 5-U/C EI 60-U/C EI 60-U/C EI 0-U/C EI 0-U/C Remaining gaps around the insulation are filled with stone wool and coated with fire stop coating paste or filled with PROMASEAL -A. Supporting distance The pipes must be suspded 50 mm on both sides from walls or on the top of floor constructions. 507e0dcef7b53fa7a600ce File

5 EI 0 Steel pipes Table 6 Insulation information for steel pipes Type Specification Detail I Metal pipe petration seal in flexible wall and rigid wall, Case CS (Continued Sustained) (over the whole pipe lgth) Table Information about lgth of the non-combustible insulation for steel pipes Pipe wall thickness (mm) Total insulation lgth 0,5 m 0 Total insulation lgth,0 m Stone wool Dsity Table 7 Dimsions for steel pipes with non-combustible insulation With non-combustible insulation Insulation thickness Type of insulation Total insulation lgth,5 m Total insulation lgth,5 m only 0 kg/m³ and 30 mm thickness Melting point 000 C, Class A-s, d0, A L -s, d0 (acc. to EN 350-) 0 kg/m³ 30 mm to 00 mm (only 30 mm thickness from mm pipe wall thickness) LS, CS, LI or CI Lgh of insulation see Table Table 7 Steel pipes In the table 7, the total lgth of the insulation depds of the pipe wall thickness and pipe diameter. The field of application giv for metal pipes with lower heat conductivity λ 5 W/mK and a melting point 00 C (e.g. stainless steel, cast iron, Nialloys (NiCr, NiMo and NiCu alloys) and Ni. x 50 mm x 0 mm x 50 mm Wall Floor Wall Floor Wall Floor Pipe diameter (mm) Ø Ø Ø Ø Ø 0 Ø 0 Pipe wall thickness (mm) s, s, s, s, s, s, Classification EI 60 U/C EI 0 U/C EI 0 U/C 507e0dcef7b53fa7a600ce File Pipe diameter (mm) 06-05

6 EI 0 Copper pipes Table Insulation information for copper pipes Type Specification Detail J Metal pipe petration seal in flexible and rigid wall in Case LS (Local Sustained) Table Information about lgth of the non-combustible insulation for copper pipes Pipe wall thickness (mm) 0 Total insulation lgth: 000 mm Stone wool Dsity Insulation thickness Type of insulation Table 0 Dimsions for copper pipes with non-combustible insulation With non-combustible insulation Total insulation lgth: 000 mm Melting point 000 C, Class A-s, d0, A L -s, d0 (acc. to EN 350-) 0 kg/m³ 30 mm to 00 mm LS, CS, LI or CI Lgh of insulation see Table x 50 mm x 0 mm x 50 mm Wall Floor Wall Floor Wall Floor Pipe diameter (mm) Ø, Ø, Ø, Ø, Ø, Ø, Pipe wall thickness (mm) s, s, s, s, s, s, Classification EI 60 U/C EI 0 U/C EI 0 U/C Table Copper pipe In this diagram, the total lgth of the insulation depds of the pipe wall thickness and pipe diameter. The field of application giv for copper pipes is also valid for other metal pipes with lower heat conductivity (λ 30 W/mK) and a melting point of minimum 03 C (e.g. stainless steel, cast iron, Ni alloys (NiCr, NiMo and NiCu alloys) and Ni. 507e0dcef7b53fa7a600ce File Pipe diameter (mm) 06-05

7 EI 0 Table Information about the minimum distance for steel pipes and copper pipes Object Distance (mm) non-combustible insulation non-combustible insulation 0 non-combustible insulation Aperture oping 0 non-combustible insulation PROMASTOP -FC 0 non-combustible insulation PROMASTOP -W (with or without non-combustible insulation) 00 non-combustible insulation Cable tray 0 non-combustible insulation PROMASTOP -IM CJ 0 non-combustible insulation PROMASEAL -A 0 non-combustible insulation - PROMASEAL -AG 00 non-combustible insulation PROMATECT -AD 0 6. Cable petration seal: in combination with PROMASTOP -IM CJ Detail K Cable petration seal in rigid wall Detail K/L The fire stop jacket PROMASTOP -IM CJ is a petration seal for cables, wires, conduits with or without cables and pipes up to mm in diameter. Due to its smoke thightness its possible to use the cable jacket for later installations. Additional sealing of the annular gap or coating is not necessary. For wall and floor application, the cable jacket shall be used on both sides. Fixing works trough screw the PROMASTOP -IM CJ into the boards. Table 3 - Fire resistance class of the cable jacket depding to the petration seal structure Electrical installation CG: All sheathed cable types mm Position x 50 mm x 0 mm x 50 mm Wall Floor Wall Floor Wall Floor EI 60 EI 60 EI 0 EI 0 EI 0 EI 0 onesided topsided two-sided two-sided Table Information about the minimum distance Distance Object (mm) PROMASTOP -IM CJ PROMASTOP -IM CJ 0 PROMASTOP -IM CJ Aperture oping 0 507e0dcef7b53fa7a600ce File Detail L Cable petration seal in flexible wall and rigid wall PROMASTOP -IM CJ PROMASTOP -FC 0 PROMASTOP -IM CJ PROMASTOP -W 0 PROMASTOP -IM CJ Cable tray 0 PROMASTOP -IM CJ PROMASEAL -AG 0 PROMASTOP -IM CJ PROMASEAL -A 0 PROMASTOP -IM CJ Non-combustible insulation 0 PROMASTOP -IM CJ PROMATECT -AD 0 Detail M Cable petration seal in rigid floor

8 EI 0 7. Plastic pipe petration seal: in combination with PROMASTOP -FC Detail M Plastic pipe petration seal in rigid wall 3 Detail N Plastic pipe petration seal in flexible wall and rigid wall 3 Detail M/N/O PROMASTOP -FC3 and PROMASTOP -FC6 can be build in and on The collar shall be placed on both sides of the wall, and below the floor Suitable for all standard types of plastic pipes and special pipes - see table 6 PROMASTOP -FC is useable for pipe diameter from 3 mm to 35 mm If the collar is mounted on the seal, zero distance is possible Optional sound decoupling strip up to a thickness of 5 mm can be used on the plastic pipe The annular gap betwe the plastic pipe and the stone wool board shall be filled with PROMASEAL -A, PROMASEAL -AG or 5. Table 5 Information about the minimum distance Object PROMASTOP -FC non-combustible pipe with insulation Distance (mm) PROMASTOP -FC Cable tray 0 PROMASTOP -FC Plastic pipe 0 PROMASTOP -FC Aluminium plastic composite pipe PROMASTOP -FC PROMASTOP - IM CJ 0 PROMASTOP -FC PROMASTOP -FC 0 PROMASTOP -FC PROMASTOP -W 30 PROMASTOP -FC Combustible insulation 0 PROMASTOP -FC Non-combustible insulation PROMASTOP -FC Aperture oping 0 Table 6 The PROMASTOP -FC6 collar shall be used for pipe diameter 00 mm, sloped pipes and pipe sockets. For more details please contact our technical service. 507e0dcef7b53fa7a600ce File Detail O Plastic pipe petration seal in rigid floor

9 EI 0 Table 6 Overview pipe materials, dimsions, installation situation and classification Product type Dimsion range Ø Pipe diameter (mm) s Pipe wall thickness (mm) Petration Seal (mm) Oritation D Floor W Wall Collar type Classification PVC-U Ø 3 / s, - Ø 50 / s, x 50 D FC3/6 EI60-U/U PVC-U Ø 3 / s, - Ø 50 / s, x 0 D FC3/6 EI0-U/U PVC-U Ø 3 / s, - Ø 50 / s, x 50 D FC3/6 EI0-U/U PE Ø 3 / s, - Ø 00 / s, x 50 D FC3/6 EI60-U/U PE Ø 3 / s, - Ø 00 / s, x 0 D FC3/6 EI0-U/U PE Ø 3 / s, - Ø 00 / s, x 50 D FC3/6 EI0-U/U PE Ø 3 / s, - Ø 00 / s, x 50 W FC3/6 EI60-U/U PE Ø 3 / s, - Ø 00 / s, x 0 W FC3/6 EI0-U/U PE Ø 3 / s, - Ø 00 / s, x 50 W FC3/6 EI0-U/U PP-H / PP-R Ø 3 / s, - Ø 00 / s, x 50 D FC3/6 EI60-U/U PP-H / PP-R Ø 3 / s, - Ø 00 / s, x 0 D FC3/6 EI0-U/U PP-H / PP-R Ø 3 / s, - Ø 00 / s, x 50 D FC3/6 EI0-U/U PP-H / PP-R Ø 0 / s, - Ø 50 / s, x 50 W FC3/6 EI60-U/U PP-H / PP-R Ø 0 / s, - Ø 50 / s, x 0 W FC3/6 EI0-U/U PP-H / PP-R Ø 0 / s, - Ø 50 / s, x 50 W FC3/6 EI0-U/U Friatec Friaphon Ø 5 / s, - Ø 0 / s 5,3 x 50 D FC3 EI60-U/U Friatec Friaphon Ø 5 / s, - Ø 0 / s 5,3 x 0 D FC3 EI0-U/U Friatec Friaphon Ø 5 / s, - Ø 0 / s 5,3 x 50 D FC3 EI0-U/U Friatec dblue Ø 50 / s, - Ø 5 / s 3, x 50 D FC3 EI60-U/U Friatec dblue Ø 50 / s, - Ø 5 / s 3, x 0 D FC3 EI0-U/U Friatec dblue Ø 50 / s, - Ø 5 / s 3, x 50 D FC3 EI0-U/U Geberit Silt db0 Ø 56 / s 3, - Ø 60 / s 7,0 x 50 D FC3 EI60-U/U Geberit Silt db0 Ø 56 / s 3, - Ø 60 / s 7,0 x 0 D FC3 EI0-U/U Geberit Silt db0 Ø 56 / s 3, - Ø 60 / s 7,0 x 50 D FC3 EI0-U/U Geberit Silt db0 Ø 56 / s 3, - Ø 35 / s 6,0 x 50 W FC3 EI60-U/U Geberit Silt db0 Ø 56 / s 3, - Ø 35 / s 6,0 x 0 W FC3 EI0-U/U Geberit Silt db0 Ø 56 / s 3, - Ø 35 / s 6,0 x 50 W FC3 EI0-U/U Pipelife Master3 Ø 75 / s, - Ø 5 / s 3,5 x 50 D FC3 EI60-U/U 507e0dcef7b53fa7a600ce File Pipelife Master3 Ø 75 / s, - Ø 5 / s 3,5 x 0 D FC3 EI0-U/U Pipelife Master3 Ø 75 / s, - Ø 5 / s 3,5 x 50 D FC3 EI0-U/U Pipelife Master3 Ø 75 / s, - Ø 5 / s 3,5 x 50 W FC3 EI60-U/U Pipelife Master3 Ø 75 / s, - Ø 5 / s 3,5 x 0 W FC3 EI0-U/U Pipelife Master3 Ø 75 / s, - Ø 5 / s 3,5 x 50 W FC3 EI0-U/U

10 EI 0 Product type Dimsion range Ø Pipe diameter (mm) s Pipe wall thickness (mm) Petration Seal (mm) Oritation D Floor W Wall Collar type Classification Poloplast PoloKal NG Ø 3 / s, - Ø 50 / s,6 x 50 D FC3/6 EI60-U/U Poloplast PoloKal NG Ø 3 / s, - Ø 50 / s,6 x 0 D FC3/6 EI0-U/U Poloplast PoloKal NG Ø 3 / s, - Ø 50 / s,6 x 50 D FC3/6 EI0-U/U Poloplast PoloKal NG Ø 3 / s, - Ø 60 / s, x 50 W FC3 EI0-U/U Poloplast PoloKal NG Ø 3 / s, - Ø 50 / s,6 x 50 W FC3/6 EI60-U/U Poloplast PoloKal NG Ø 3 / s, - Ø 50 / s,6 x 0 W FC3/6 EI0-U/U Poloplast PoloKal NG Ø 3 / s, - Ø 50 / s,6 x 50 W FC3/6 EI0-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 50 / s,6 x 50 D FC3/6 EI60-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 50 / s,6 x 0 D FC3/6 EI0-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 50 / s,6 x 50 D FC3/6 EI0-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 60 / s, x 50 W FC3 EI0-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 50 / s,6 x 50 W FC3/6 EI60-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 50 / s,6 x 0 W FC3/6 EI0-U/U Poloplast PoloKal XS Ø 3 / s, - Ø 50 / s,6 x 50 W FC3/6 EI0-U/U Poloplast PoloKal 3S Ø 75 / s 3, - Ø 60 / s 7,5 x 50 D FC3 EI60-U/U Poloplast PoloKal 3S Ø 75 / s 3, - Ø 60 / s 7,5 x 0 D FC3 EI0-U/U Poloplast PoloKal 3S Ø 75 / s 3, - Ø 60 / s 7,5 x 50 D FC3 EI0-U/U Poloplast PoloKal 3S Ø 75 / s 3, - Ø 60 / s 7,5 x 50 W FC3 EI60-U/U Poloplast PoloKal 3S Ø 75 / s 3, - Ø 60 / s 7,5 x 0 W FC3 EI0-U/U Poloplast PoloKal 3S Ø 75 / s 3, - Ø 60 / s 7,5 x 50 W FC3 EI0-U/U Rehau Raupiano Plus Ø 0 / s, - Ø 00 / s 6, x 50 D FC6 EI60-U/U Rehau Raupiano Plus Ø 0 / s, - Ø 00 / s 6, x 0 D FC6 EI0-U/U Rehau Raupiano Plus Ø 0 / s, - Ø 00 / s 6, x 50 D FC6 EI0-U/U Rehau Raupiano Plus (+Socket) Ø 0 / s, - Ø 5 / s 3, x 50 D FC6 EI60-U/U Rehau Raupiano Plus (+Socket) Ø 0 / s, - Ø 5 / s 3, x 0 D FC6 EI0-U/U Rehau Raupiano Plus (+Socket) Ø 0 / s, - Ø 5 / s 3, x 50 D FC6 EI0-U/U Rehau Raupiano Plus (+Socket) Ø 0 / s, - Ø 5 / s 3, x 50 W FC6 EI60-U/U Rehau Raupiano Plus (+Socket) Ø 0 / s, - Ø 5 / s 3, x 0 W FC6 EI0-U/U Rehau Raupiano Plus (+Socket) Ø 0 / s, - Ø 5 / s 3, x 50 W FC6 EI0-U/U For the exact details of the field of application please take the classification report. 507e0dcef7b53fa7a600ce File

11 EI 0. Plastic pipe petration seal: in combination with PROMASTOP -W 5 Detail P Plastic pipe petration seal in rigid floor 5 Detail Q Plastic pipe petration seal in rigid wall Detail P/Q/R PROMASTOP -W can be only used inserted in the petration seal There must be space around the installation, otherwise ough shall be prepared. PROMASTOP -W shall be installed flush with the petration seal, maximum 5 mm in front of the petration seal. For fasting PROMASTOP -W in the stone wool petration seal use, PROMASTOP -I, PROMASEAL -A or PROMASEAL -AG 5. No waste, the cut d can be used The application of the PROMASTOP -W is two-sided in the wall and one-sided below of the floor in the petration seal The amount of layers must be followed (see consumption tables). Table 7 Information about the minimum distance Minimum distance for petration seals of all pipe types with PROMASTOP -W Object Distance (mm) PROMASTOP -W PROMASTOP -FC 0 PROMASTOP -W Non-combustible pipe with insulation 00 PROMASTOP -W Cable tray 00 PROMASTOP -W PROMASTOP -W 0 PROMASTOP -W Aluminium plastic composite pipe 00 PROMASTOP -W Aperture oping 00 PROMASTOP -W PROMASTOP -IM CJ 00 Table The pipe types in table in combination with the respective number of layers in the x 50 mm stone wool petration seal fulfill the fire resistance class of EI0-U/U or rather EI0-U/C in wall and floor. 507e0dcef7b53fa7a600ce File Detail R Plastic pipe petration seal in flexible wall and rigid wall

12 EI 0 Table Overview pipe materials, dimsions, installation situation and classification Product type Dimsion range Ø Pipe diameter (mm) s Pipe wall thickness (mm) Petration Seal (mm) Oritation D Floor W Wall No. of layers Ø (mm) Layers Classification PVC Ø 3 / s, - Ø 60 / s, x 50 W PE Ø 3 / s,0 - Ø 60 / s,6 x 50 W PP-H / PP-R Ø 3 / s, - Ø 60 / s,6 x 50 W Poloplast PoloKal NG Poloplast PoloKal 3S Poloplast PoloKal XS Geberit Silt db 0 Ø 3 / s, Ø 0 / s, Ø 50 / s,0 Ø 75 / s,6 Ø 0 / s 3,0 Ø 0 / s 3, Ø 5 / s 3, Ø 60 / s, Ø 75 / s 3, Ø 0 / s,5 Ø 0 / s, Ø 5 / s 5,3 Ø 60 / s 7,5 Ø 3 / s, Ø 0 / s, Ø 50 / s,0 Ø 75 / s,6 Ø 0 / s 3,0 Ø 0 / s 3, Ø 5 / s 3, Ø 60 / s, Ø 56 / s 3, Ø 63 / s 3, Ø 75/ s 3,6 Ø 0 / s 5,5 Ø 0 / s 6,0 Ø 35 / s 6,0 Ø 60 / s 7,0 x 50 W x 50 W x 50 W x 50 W EI 0-U/C EI 0-U/C EI 0-U/C EI 0-U/U EI 0-U/U EI 0-U/U 507e0dcef7b53fa7a600ce File EI 0-U/U

13 EI 0 Product type Dimsion range Ø Pipe diameter (mm) s Pipe wall thickness (mm) Petration Seal (mm) Oritation D Floor W Wall No. of layers Ø (mm) Layers Classification PVC Ø 3 / s, - Ø 60 / s, x 50 D EI 0-U/C PE Ø 3 / s,0 - Ø 60 / s,6 x 50 D PP-H / PP-R Ø 3 / s, - Ø 60 / s,6 x 50 D Ø 3 / s, Ø 0 / s, Ø 50 / s,0 Poloplast PoloKal NG Ø 75 / s,6 x 50 D Ø 0 / s 3,0 Ø 0 / s 3, Ø 5 / s 3, Ø 3 / s, Ø 0 / s, Ø 50 / s,0 Poloplast PoloKal XS Ø 75 / s,6 Ø 0 / s 3,0 Ø 0 / s 3, Ø 5 / s 3, Ø 56 / s 3, Ø 63 / s 3, Geberit Silt db0 Ø 75/ s 3,6 Ø 0 / s 5,5 Ø 0 / s 6,0 Ø 3 / s, - Ø 0 / s 6,7 + combustible insulation PP-H / PP-R (B-s3, d0; thickness mm; configuration CS) For the exact details of the field of application please take the classification report. x 50 D x 50 D EI 0-U/C EI 0-U/C EI 0-U/U EI 0-U/U EI 0-U/U x 50 D 3 0 EI 0-U/C 507e0dcef7b53fa7a600ce File

14 EI 0. Aluminium plastic composite pipes in petration seal with PROMASTOP -W Detail S Detail T Aluminium plastic composite pipe petration seal in rigid floor 5 5 Detail S/T/U The application of PROMASTOP -W is two-sided in the wall and one -sided below of the floor in the petration seal. PROMASTOP -W shall be installed flush with the petration seal, maximum 5 mm in front of the petration seal and may not be overpainted. For fasting PROMASTOP -W in the stone wool petration seal use, PROMASEAL -A or PROMASEAL -AG 5 6. Aluminium plastic composite pipes with the chemical description PE-Xb/AI/PE-HD, (Type Pipelife Radopress) with combustible insulation (thickness 6 to 3 mm, class B-s3,d0 acc. to EN or higher rated e.g. rubber / thickness to mm, class E acc. to EN 350 e.g. PE) can be sealed with PROMASTOP -W. The combustible insulation is ctered in the petration seal and must have 500 mm minimum total lgth of the insulation. The configuration of the insulation class B-s3, d0 is LS or CS, for insulation class E, the case CS. The pipes must be suspded 50 mm on both sides from walls or on the top of floor constructions. Table Classification - with insulation 6-3 mm, class B-s3, d0 Insulation lgth 500 mm Aluminium plastic composite pipe with combustible insulation and PROMASTOP -W ( layer) Pipelife Radopress Ø 6-50 mm Ø 63 mm x 50 mm Wall EI 0-U/C Floor EI 0-U/C E 0-U/C and EI 60-U/C Table 0 Classification with insulation - mm, class E Aluminium plastic composite pipe with combustible insulation and PROMASTOP -W ( layer) Pipelife Radopress Ø 6-3 mm x 50 mm Wall EI 0-U/C Floor EI 0-U/C 507e0dcef7b53fa7a600ce File Detail U Aluminium plastic composite pipe petration seal in flexible wall and rigid wall

15 EI 0 0. Non-combustible pipes with combustible in petration seal with PROMASTOP -W Detail V Detail W Non-combustible pipes with combustible insulation 5 Detail V/W/X Steel and copper pipes (and their substitutes) with combustible insulation (thickness 6 to 3 mm, Class B-s3, d0 acc. to EN 350 or higher rated e.g. rubber) can be sealed with PROMASTOP -W. The insulation case is CS. The pipes must be suspded 50 mm on both sides from walls or on the top of floor constructions. Steel pipes Table Steel pipes Classification with insulation thickness 6-3 mm, B-s3, d0 Steel pipes with combustible insulation and PROMASTOP -W ( layer) x 50 mm Wall Floor Ø 50 / s,0/, - Ø 0 / s0,0/, EI 0-U/C EI 0-U/C s Pipe wall thickness in mm The field of application giv for metal pipes with lower heat conductivity λ 5 W/mK and a melting point 00 C (e.g. stainless steel, cast iron, Nialloys (NiCr, NiMo and NiCu alloys) and Ni. Copper pipes Table Copper pipes Classification with insulation thickness 6-3 mm, B-s3, d0 Copper pipes with combustible insulation and PROMASTOP -W ( layer) x 50 mm Wall Floor Ø 0 / s,0/, - Ø, / s,0/, EI 0-U/C EI 0-U/C s Pipe wall thickness in mm Results of copper pipes are valid for steel pipes but not vise versa and for pipes with λ 30 W/mK and a melting point of 03 C (e.g. stainless steel, cast iron, Nialloys (NiCr, NiMo and NiCu alloys) and Ni. 507e0dcef7b53fa7a600ce File Detail X Non-combustible pipes with combustible insulation