Mixed penetration seal for cables and pipes Intumex -CSP

Transcription

1 Mixed penetration seal for Technical data Intumex -CSP / Intumex CB Stone wool, in acc. Table 3 Intumex RS0 Intumex Wrap Intumex MG Intumex AN Intumex KH Cable group - Supporting construction, in acc. Table Plastic pipe Non combustible pipe material Aluminium plastic composite pipe Threaded rods, M or M Stone wool backfilling material, density 0 kg/m³ Combustile insulation Identification label Certificate: ETA/ Advantages ÖÖFast and easy to install in wall and floor constructions ÖÖWet film thickness, mm on stone wool boards (= Dry film thickness of,0 mm) ÖÖWorkable with brush, roller, spatula or airless ÖÖIntumex CSP penetration seals can be painted with different paint and coating systems for decorative purposes or against environmental influences Table (Detail A&B) Overview Intumex -CSP mixed penetration seal Product name Description Intumex -CSP Feuerschutzbeschichtung. Installation procedure. Aperture framing Detail A Mixed penetration seal in flexible wall and rigid wall 3. Field of application. Cable penetration seal. Non combustible pipes with non combustible insulation 3 0. Intumex KH Fire stop cable jacket 7. Intumex MG. Intumex AN. Intumex RS0 Fire stop collar 0. Intumex Wrap Fire stop wrap. Aluminium plastic composite pipe. Non combustible pipes with combustible insulation 3 Detail B Mixed penetration seal in rigid floor

2 Detail C Possible positions of the stone wool boards Detail D Aperture framing of the flexible wall Table Supporting construction, maximum seal size and fire resistance class (Blank seal) Separating element Stone wool x 0 mm Fire resistance class Flexible wall, m² EI0 Rigid wall, m² EI0 Rigid floor, m² EI0 Framing Framing. Installation procedure ÖÖBuild a aperture framing in flexible walls, as shown in Detail D ÖÖThe boards must be made of non combustible stone wool (A acc. to EN 30-), with a melting point of 000 C and a density of 0 kg/m³ if not defined otherwise (see Table 3) ÖÖThe distance between the stone wool boards may be 0 mm. Ö The Intumex -CSP firestop coating must be applied on the outer surfaces, all cutting edges and board joints. ÖÖRemaining gaps are filled with stone wool and coated with fire stop coating Intumex -CSP paste or filled with Intumex AN or Intumex AN plus. ÖÖIt is not necessary to paint the adjacent wall and floor construction ÖÖSecure the floor penetration seal aganist step on ÖÖAffix the identification label Detail C There are 3 possibilities shown in Detail C shown, how to build in the penetration seal in floor and wall constructions. ÖÖflush to the upper edge of the floor ÖÖflush to the lower edge of the floor ÖÖboth stone wool boards flush to the upper and lower edge of the floor. Aperture framing Detail D The penetration seal my be build into walls and floors according table. For flexible walls there are the following possibilities for the aperture framing: ÖÖThe existing metal stud is used, additional metal studs shall be added to create a circulating metal frame ÖÖWithout the metal stud but with minimum layer of the flexible wall lining in the aperture ÖÖWith the metal stud and minimum layer of the flexible wall lining in the aperture 3. Field of application Table In table are the maximum tested and certified penetration seal sizes shown, depending on the installation situation. The maximum sizes may not be exceeded. Flexible wall constructions The wall must a thickness of 00 mm and be made from wooden or metal studs which are lined on both sides with minimum layers of minimum. mm thick fire protective boards (other board thicknesses shall be permissible, please note minimum thickness). For timber stud walls, a minimum distance of 00 mm must be kept from each of the wooden stud to the sealing and the cavity between studs and sealing must be filled with a least 00 mm insulation material compliant to class A or A (in acc. EN 30-). An additional framing with boards of the opening is not necessary.

3 Table 3 Tested and certified stone wool boards: Manufacturer Rockwool Knauf Insulations Paroc OY AB Isover Product type RP-XV, Hardrock II, Rockwoll 30, Taurox D-C, Taurox Duo NP, Rockwool Paneel 7 Knauf Insulations DP-, Knauf Insulations FDB D0 Pyrotech slab 0 0, Paroc Pro Roof Slab Orsil T-N Rigid wall constructions (Aerated concrete, concrete, reinforced concrete, masonry,...): The rigid wall must have a thickness 00 mm and a density of 0 kg/m³. The results achieved using a standard rigid supporting construction are valid for separating construction products of concrete or masonry having a similiar or higher thickness and density as the tested ones. The classification results from flexible wall constructions may be also applied to rigid wall constructions in case the thickness and density is higher than those of the tested construction. Table 3 The system tested and certified stone wool boards (Density 0 kg/m³, melting point 000 C, A accoring EN 30-) are listed in table 3. Rigid floor constructions (Aerated concrete, concrete, reinforced concrete, masonry,...): The rigid floor must have a thickness of 0 mm and a density of 0 kg/m³.. Cable penetration seal with Intumex -CSP Detail E Cables, cablebundles, conduits, bundle of conduits, empty pipes, cable trays and cable ladders may pass trough the Intumex -CSP penetration seal in wall and floor. Up to a diameter of 00 mm of cable bundles, there is no need additional seal, the coating with Intumex -CSP (acc. table ) is enough. Table As shown in table, mm wet film thickness shall be applied to cables of the cable group -, cable trays and cable ladders. The length of the coating is 00 mm, measured from the surface of the penetration seal. Specimen of the cable group need a coating thickness of mm. Detail E Table Coating thickness and coating length Object Wet film thickness Coating length Cable group - Cable group Cable trays, cable ladders, 00 Detail F Cable penetration seal in flexible wall and rigid wall Supporting distance The cables, cable bundles, cable trays, and cable ladders must be suspended 0 mm on both sides from walls or on the top of floor constructions. Table Table shows the fire resistance classification of the cable groups, depending on the supporting construction. The retrospective installation in the Intumex -CSP penetration seal is possible, if all application guidelines are followed.

4 Table Fire resistance class of the cable groups depending on the penetration seal structure Classification depending on the orientation Electrical installation CG : All sheated cable types Ø mm EI 0 EI 0 CG : All sheated cable types Ø 0 mm CG 3: All sheated cable types0 Ø 0 mm EI 0 E 0 EI 0 E 0 EI 0 EI 0 CG : Cable bundle made of cables of CG Ø 00 mm EI 0 EI 0 CG : Non sheated cable types Ø mm CG : Small conduits and tubes, made of plastic or steel with pipe end configuration U/C, Ø mm CG Cable group according EN 3-3:00 EI 0 E 0 EI 0-U/C EI 0 EI 0-U/C. Non combustible pipes with non combustible insulation with Intumex -CSP Detail G Non combustible pipes can be sealed with a section insulation made of stone wool (Melting point 000 C, A/A L EN 30- or higher rated). The required lengths and thicknesses are shown in the diagramm. These are depending on the pipe diameter, the pipe wall thickness and the pipe type (steel, copper or their substitutes). Detail G Metal pipe penetration seal in rigid floor Detail H The insulation (case LS) shall be placed in the center of the supporting construction or the penetration seal and fixed with steel wire (minimum thickness 0, mm). The insulation length is shown in the table and. The insulation case LS covers: CI, CS, LI and LS. Remaining gaps around the insulation are filled with stone wool and coated with fire stop coating Intumex -CSP paste or filled with Intumex AN. Supporting distance The pipes must be suspended 0 mm on both sides from walls or on the top of floor constructions. Detail H Metal pipe penetration seal in rigid wall

5 Steel pipes Table Insulation information for steel pipes Product type Stone wool Density Insulation thickness Type of insulation Specification Melting point 000 C, Class A-s, d0, A L -s,d0 (acc. to EN 30-) 0 kg/m³ to 0 kg/m³ 30 mm to 00 mm LS, CS Detail I Metal pipe penetration seal in flexible wall and rigid wall, Case LS = local sustained Length of insulation see Table Table 7 Dimensions for steel pipes with non combustible insulation With non combustible insulation Intumex -CSP penetration seal with x 0 mm stone wool boards Pipe diameter 7 7 Pipe wall thickness,0,,0, Classification EI 0 U/C EI 0 U/C Detail J Metal pipe penetration seal in flexible wall and rigid wall, Case CS = continued sustained (over the whole pipe length) Table In this table, the total length of the insulation depends of the pipe wall thickness and pipe diameter. Table Information about length of the non combustible insulation for steel pipes The field of application given for metal pipes with lower heat conductivity λ W/mK and a melting point 03 C (e.g. stainless steel, cast iron, Nialloys (NiCr, NiMo and NiCu alloys). Pipe wall thickness 0. Total insulation length: 00 mm. Total insulation length: 000 mm Pipe diameter

6 Copper pipes Table Insulation information for copper pipes Product type Specification Stone wool Density Insulation thickness Type of insulation Melting point 000 C, A-s, d0, A L -s,d0 ac. to EN 30-0 kg/m³ to 0 kg/m³ 30 mm to 00 mm LS, CS Detail K Metal pipe penetration seal in rigid floor, Case CI = Continued, interrupted Length of insulation See Table Table 0 Classification depending on the orientation With non combustible insulation Intumex -CSP penetration seal with x 0 mm stone wool boards Pipe diameter,, Pipe wall thickness,0,,0, Classification EI 0 U/C EI 0 U/C Detail L Metal pipe penetration seal in rigid floor, Case CS= Continued, sustained Table In this diagram, the total length of the insulation depends on the pipe wall thickness and pipe diameter. Results of copper pipes are valid for steel pipes but not vise versa and for pipes with λ 30 W/mK and a melting point of 03 C. Table Information about length of the non combustible insulation for copper pipes Pipe wall thickness 0. Total insulation length: 000 mm. Total insulation length: 000 mm Pipe diameter

7 . Cable penetration seal: Intumex -CSP in combination with Intumex KH Detail M/N/O 7 The fire stop jacket Intumex KH is a penetration seal for cables, wires, conduits with or without cables and pipes up to a diameter of mm. Due to its smoke thightness its possible to use the cable jacket for later installations. Additional sealing of the annular gap or coating is not necessary. For wall and floor application, the cable jacket shall be used on both sides. Fixing works trough screw the Intumex KH into the boards. Table Detail M Cable penetration seal in rigid wall 7 Table shows the fire resistance classification of the cable groups, depending on the orientation. Table Fire resistance class depending on the orientation Intumex -CSP penetration seal with x 0 mm stone Electrical installation wool boards All cables Ø mm EI 0 EI Flexible and rigid conduits; with or without cables, U/U Ø 0 mm EI 0 EI 0 Classification blank seal EI 0 EI 0 Table 3 Information about the minimum distance 7 Object Distance Cable jacket Cable jacket Intumex KH 0 Cable jacket Fire stop collar Intumex RS0 0 Cable jacket Fire stop wrap Intumex Wrap 0 Cable jacket combustible insulation 0 Detail N Cable penetration seal in flexible wall and rigid wall 7 Cable jacket non combustible insulation 0 Cable jacket Cable tray 0 Cable jacket Cable bundle 0 Cable jacket Intumescent acrylic sealant Intumex MG 0 Cable jacket Aperture opening 0 Cable jacket Self supporting ducts 0 Cable jacket Bus bars or their housings 0 Cable jacket All other installations 00 Detail O Cable penetration seal in rigid floor

8 7. Mixed penetration seal: Intumex -CSP in combination with Intumex MG 0 Detail P The intumescent fire stop sealant Intumex MG can be used as penetration seal for cable bundles Ø 0 mm, flexible and rigid conduits, conduit bundles and plastic pipes up to a diameter of Ø 0 mm. A defined annular gap will be created around the installation in the penetration seal. The annular gap is backfilled with stone wool (Class A acc. to EN 30-, melting point 000 C). In wall application, Intumex MG shall be applied on both sides, in floor orientation only on the bottom side in the penetration seal. The annular gap depth is mm and the width 0 mm. Detail P Cable penetration seal in flexible wall and rigid wall Table Overview pipe materials, dimensions, installation situation and classification Type Dimension range Ø Pipe diameter s Pipe wall thicknes Penetration Seal Orientation F W Annular gap width x depth Classification PVC pipe Ø 0 / s, x 0 W 0 x EI 0-U/C PVC pipe Ø 0 / s, x 0 F 0 x EI 0-U/C PP pipe Ø 0 / s, x 0 W 0 x EI 0-U/C PP pipe Ø 0 / s, x 0 F 0 x EI 0-U/C PE pipe Ø 0 / s, x 0 W 0 x EI 0-U/C PE pipe Ø 0 / s, x 0 F 0 x EI 0-U/C Cable bundle, single cable Ø mm Cable bundle, single cable Ø mm Flexbible and rigid conduits (U/C) / with or without cables Bundle of flexbible and rigid conduits (U/C) / with or without cables Ø 0 x 0 W 0 x EI 0 Ø 0 x 0 F 0 x EI 0 single Ø max. 0 x 0 W 0 x EI 0-U/C Ø max. x 0 x 0 W 0 x EI 0-U/C Table Information about the minimum distance Object Distance Plastic pipe plastic pipe, cable bundle, conduits 0 Cable bundle plastic pipe, cable bundle, conduits 0 Conduits plastic pipe, cable bundle, conduits 0 Intumex MG all not defined products 00

9 . Cable penetration seal: Intumex -CSP in combination with Intumex AN Detail Q The fire stop sealant Intumex AN can be uses as penetration seal for single cables and cable bundles. A defined annular gap will be created around the installation in the penetration seal. The annular gap is backfilled with stone wool (Class A acc. to EN 30-, melting point 000 C). In wall and floor application, Intumex AN shall be applied on both sides. Zero distance between cable bundles is possible. Flexible wall Detail Q Detail R/S Intumex AN penetration seal in flexible wall Intumex AN in Intumnex CSP A penetration seal in flexible wall thickness: 00 mm Annular gap width: 0 mm Annular gap depth: mm Backfilling: Class A acc. to EN 30- (Stone wool, ceramic wool, ), melting point 000 C Density backfilling: 0 kg/m³ Table Fire resistance of the cable types depending on the orientation Classification in Intumex -CSP penetration seal Detail R Single cable penetration seal in flexible wall Sheathed single cable x 0 mm² (H07RN-F G 0 SW or equal products) Sheathed single cable 3 x 0 mm² (NXSEY or equal products) EI 0 E 0 EI 0 Cable bundle with pieces of sheathed single cables x, mm² (H07RN-F or equal products) EI 0 Cable bundle with 0 pieces of sheathed single cables x 0, mm² (telecommunication or equal products) E 0 EI 0 Detail S Cable bundle penetration seal in flexible wall

10 Detail T Cable penetration seal in rigid wall Detail U Cable penetration seal in rigid floor Rigid wall Detail T Intumex -CSP penetration seal in rigid Intumex AN in Intumex -CSP penetration seal in rigid wall wall thickness: 00 mm Annular gap width: Annular gap depth: Backfilling: Density backfilling: 0 mm mm Melting point 000 C, Class A acc. to EN 30- (stone wool, ceramic wool, ) 0 kg/m³ Table 7 Fire resistance of the cable types depending on the orientation Classification in Intumex -CSP penetration seal Sheathed single cable x 0 mm² (H07RN-F G 0 SW or equal products) Sheathed single cable 3 x 0 mm² (NXSEY or equal products) Cable bundle with pieces of sheathed single cables x, mm² (H07RN-F or equal products) Cable bundle with 0 pieces of sheathed single cables x 0, mm² (telecommunication or equal products) EI 0 E 0 EI 0 EI 0 E 0 EI 0 Rigid floor Detail V Single cable penetration seal in rigid floor Detail U/V/W Intumex AN in Intumex -CSP penetration seal in rigid floor thickness: Annular gap width: Annular gap depth: Backfilling: Density backfilling: 0 mm 0 mm mm Melting point 000 C, Class A acc. to EN 30- (stone wool, ceramic wool, ) 0 kg/m³ Table Fire resistance of the cable types depending on the orientation Detail W Cable bundle penetration seal in rigid floor Classification in Intumex -CSP penetration seal Sheathed single cable x 0 mm² (H07RN-F G 0 SW or equal products) Sheathed single cable 3 x 0 mm² (NXSEY or equal products) Cable bundle with pieces of sheathed single cables x, mm² (H07RN-F or equal products) Cable bundle with 0 pieces of sheathed single cables x 0, mm² (telecommunication or equal products) EI 0 EI 0 EI 0 EI 0

11 . Plastic pipe penetration seal: Intumex -CSP in combination with Intumex RS0 3 3 Detail X Plastic pipe penetration seal in flexible wall and rigid wall Detail X/Y ÖÖ Intumex RS0/30 and Intumex RS0/0 can be build in and on ÖÖ The collar shall be placed on both sides of the wall, and below the floor ÖÖ Optional PE based sound decoupling strip up to a thickness of mm Class E (acc. to EN 30-) or higher rated can be used ÖÖ A test with pipe end configuration U/U covers the pipe end configurations C/U, U/C and C/C ÖÖ A test with pipe end configuration U/C covers the pipe end configuration C/C ÖÖ The diameter of the tested sloped pipe can be reduced but not increased. The Intumex RS0/0 fire stop collar with a hight of 0 mm shall be used for pipe sockets ÖÖ For fixing the collars on the penetration seal, use threaded rods M or M with washers and nuts ÖÖ The annular gap between the plastic pipe and the stone wool board shall be filled with Intumex AN, Intumex MG or Intumex AC Table 0 The Intumex RS0/0 collar shall be used for pipe diameter 00 mm, sloped pipes and pipe sockets. For more details please contact our technical service. Detail Y Plastic pipe penetration seal in rigid floor Table Information about the minimum distance Object 3 0 The test results and classifications for PE-HD pipes acc. to EN 0-, EN -, EN -, DIN 07 and DIN 07 with fire stop collar Intumex RS0 on Intumex -CSP penetration seal are applicable for ABS-pipes acc. to EN - and SAN + PVC-pipes acc. to EN -. The test results and classifications for PP-H and PP-R pipes are applicable for pipes acc. e.g. to ÖNORM B 7-, DIN 077 and DIN 07 (or equal products). Distance Fire stop collar Fire stop collar Intumex RS0 0 Fire stop collar Fire stop wrap Intumex Wrap 0 Fire stop collar Fire stop cable jacket Intumex KH 0 Fire stop collar combustible insulation 0 Fire stop collar non combustible insulation 0 Fire stop collar Cable trays 0 Fire stop collar Cable bundles 0 Fire stop collar Aperture opening 30 Fire stop collar Self supporting ducts 0 Fire stop collar Bus bars or their housings 0 Fire stop collar All other installations 00

12 Table 0 Overview pipe materials, dimensions, installation situation and classification Type Dimension range Ø Pipe diameter s Pipe wall thicknes Penetration Seal Orientation F W Collar type Classification Friatec Friaphon Ø / s, - Ø 0 / s,3 x 0 F RS0/30 EI 0-U/U Friatec dblue Ø 0 / s, - Ø / s 3, x 0 F RS0/30 EI 0-U/U Geberit Silent db0 Ø / s 3, - Ø 0 / s 7,0 x 0 F RS0/30 EI 0-U/U Geberit Silent PP Ø 3 / s,0 - Ø / s, x 0 F RS0/30 EI 0-U/U Geberit Silent db0 Ø / s 3, - Ø 3 / s,0 x 0 W RS0/30 EI 0-U/U Pipelife Master3 Ø 7 / s, - Ø / s 3, x 0 F RS0/30 EI 0-U/U Pipelife Master3 Ø 7 / s, - Ø / s 3, x 0 W RS0/30 EI 0-U/U PoloKal NG Ø 3 / s, - Ø 0 / s, x 0 F RS0/30 or 0 EI 0-U/U PoloKal 3S Ø 7 / s 3, - Ø 0 / s 7, x 0 F RS0/30 EI 0-U/U PoloKal XS Ø 3 / s, - Ø 0 / s, x 0 F RS0/30 or 0 EI 0-U/U PoloKal NG Ø 3 / s, - Ø 0 / s, x 0 W RS0/30 EI 0-U/U PoloKal NG Ø 3 / s, - Ø 0 / s, x 0 W RS0/30 or 0 EI 0-U/U PoloKal XS Ø 3 / s, - Ø 0 / s, x 0 W RS0/30 or 0 EI 0-U/U PoloKal XS Ø 3 / s, - Ø 0 / s, x 0 W RS0/30 EI 0-U/U PoloKal 3S Ø 7 / s 3, - Ø 0 / s 7, x 0 W RS0/30 EI 0-U/U PVC-U Ø 3 / s, - Ø 0 / s, x 0 F RS0/30 or 0 EI 0-U/U PVC-U Ø / s 3, - Ø 0 / s 3, x 0 F RS0/30 or 0 (build in) EI 0-U/C PE-HD Ø 3 / s, - Ø 00 / s, x 0 F RS0/30 or 0 EI 0-U/U PE HD Ø 0 / s, - Ø 00 / s, x 0 W RS0/30 or 0 EI 0-U/U PP-H / PP-R Ø 30 / s, - Ø 00 / s, x 0 F RS0/30 or 0 EI 0-U/U PP-H / PP-R Ø 7 / s, - Ø 0 / s 3,0 x 0 F RS0/30 or 0 (build in) EI 0-U/U PP-H / PP-R Ø 0 / s, - Ø 0 / s, x 0 W RS0/30 or 0 EI 0-U/U Raupiano Plus Ø 0 / s, - Ø 00 / s, x 0 F RS0/0 EI 0-U/U Raupiano Plus (+Socket) Ø 0 / s, - Ø / s 3, x 0 F RS0/0 EI 0-U/U Raupiano Plus (+Socket) Ø 0 / s, - Ø / s 3, x 0 W RS0/0 EI 0-U/U For the exact details of the field of application please take the ETA.

13 0. Plastic pipe penetration seal: Intumex -CSP in combination with Intumex Wrap Detail AA/BB/CC 0 The application of Intumex Wrap is two-sided in the wall and one -sided below of the floor in the penetration seal. Intumex Wrap shall be installed flush with the penetration seal, maximum mm in front of the penetration seal and may not be overpainted. For fastening Intumex Wrap in the stone wool penetration seal use Intumex -CSP Intumex AN or Intumex MG. A test with pipe end configuration U/U covers the pipe end configurations C/U, U/C and C/C. A test with pipe end configuration U/C covers the pipe end configuration C/C. The pipes must be suspended 0 mm on both sides from walls or on the top of floor constructions. Detail AA Table Information about the minimum distance Object Distance 0 Fire stop wrap Fire stop collar Intumex RS0 0 Fire stop wrap Fire stop wrap Intumex Wrap 0 Fire stop wrap Cable jacket Intumex KH 0 0 Detail BB Plastic pipe penetration seal in rigid floor Fire stop wrap Combustible insulation 0 Fire stop wrap Non combustible insulation 0 Fire stop wrap Cable tray 0 Fire stop wrap Cable bundle 00 Fire stop wrap Aperture opening 37 Fire stop wrap Self supporting ducts 0 Fire stop wrap All other installations Detail CC Plastic pipe penetration seal in flexible wall and rigid wall

14 Table Overview pipe materials, dimensions, installation situation and classification Type Dimension range Ø Pipe diameter s Pipe wall thickness Penetration Seal Orientation F W PVC Ø 3 / s, - Ø 0 / s, x 0 W PE Ø 3 / s,0 - Ø 0 / s, x 0 W PP-H / PP-R Ø 3 / s, - Ø 0 / s, x 0 W PoloKal NG Ø 3 / s, - Ø 0 / s, x 0 W PoloKal 3S Ø 7 / s 3, - Ø 0 / s 7, x 0 W PoloKal XS Ø 3 / s, - Ø 0 / s, x 0 W Geberit Silent db0 Ø 3 / s, - Ø 0 / s, x 0 W PVC Ø 3 / s, - Ø 0 / s, x 0 F PE Ø 3 / s,0 - Ø 0 / s, x 0 F PP-H / PP-R Ø 3 / s, - Ø 0 / s, x 0 F PoloKal NG Ø 3 / s, - Ø / s 3, x 0 F PoloKal XS Ø 3 / s, - Ø / s 3, x 0 F Geberit Silent db0 Ø 0 / s,0 - Ø / s, x 0 F PP-H / PP-R Ø 3 / s, - Ø 0 / s,7 + combustible Insulation (B-s3, d0; thickness mm; Case CS) For the exact details of the field of application please take the ETA. Layers Ø > Layers 3 3 g 7 0 g g g 3 3 g 7 0 g g g 3 3 g 7 0 g g g 3 g 0 3 g g 0 g 0 0 g 7 0 g 0 g 0 0 g 3 g 0 3 g g 0 g 0 0 g 3 g g 0 g 0 0 g 3 3 g 7 0 g g g 3 3 g 7 0 g g g 3 3 g 7 0 g g g 3 g 0 3 g g 0 g 3 g 0 3 g g 0 g 0 3 g g 0 g Classification EI 0-U/C EI 0-U/C EI 0-U/C EI 0-U/U EI 0-U/U EI 0-U/U EI 0-U/U EI 0-U/C EI 0-U/C EI 0-U/C EI 0-U/U EI 0-U/U EI 0-U/U x 0 F 3 0 g EI 0-U/C

15 . Aluminium plastic composite pipes in Intumex -CSP penetration seal with Intumex Wrap Detail DD/EE/FF Detail DD The application of Intumex Wrap is two-sided in the wall and one -sided below of the floor in the penetration seal. Intumex Wrap shall be installed flush with the penetration seal, maximum mm in front of the penetration seal and may not be overpainted. For fastening Intumex Wrap in the stone wool penetration seal use Intumex -CSP, Intumex AN or Intumex MG. Aluminium plastic composite pipes with the chemical description PE-Xb/AI/PE-HD, (Type Pipelife Radopress) with combustible insulation (thickness to 3 mm, class B-s3,d0 acc. to EN 30 - or higher rated e.g. rubber / thickness to mm, class E acc. to EN 30 e.g. PE) can be sealed with Intumex Wrap. The combustible insulation is centered in the penetration seal and must have 00 mm minimum total length of the insulation. The configuration of the insulation class B-s3, d0 is LS, for insulation class E, the case CS. The pipes must be suspended 0 mm on both sides from walls or on the top of floor constructions. Table 3 Classification - with insulation -3 mm, class B-s3, d0 Insulation length 00 mm Aluminium plastic composite pipe with combustible insulation and Intumex Wrap layer Pipelife Radopress Ø - 3 mm Ø 3 mm EI 0-U/C Intumex -CSP x 0 mm EI 0-U/C E 0 EI 0-U/C Detail EE Aluminium plastic composite pipe penetration seal in rigid floor Table Classification with insulation - mm, class E Insulation length 00 mm Aluminium plastic composite pipe with combustible insulation and Intumex Wrap layer Intumex -CSP x 0 mm Pipelife Radopress Ø - 3 mm EI 0-U/C EI 0-U/C Detail FF Aluminium plastic composite pipe penetration seal in flexible wall and rigid wall

16 . Non combustible pipes with combustible in Intumex -CSP penetration seal with Intumex Wrap Detail GG/HH/II Steel- and copper pipes (and their substitutes) with combustible insulation (thickness to 3 mm, Class B-s3, d0 acc. to EN 30 or higher rated e.g. rubber) can be sealed with Intumex Wrap. The insulation case is CS. The application of Intumex Wrap is two-sided in the wall and one -sided below of the floor in the penetration seal. Intumex Wrap shall be installed flush with the penetration seal, maximum mm in front of the penetration seal. For fastening Intumex Wrap in the stone wool penetration seal use Intumex -CSP, Intumex AN, Intumex AN plus or Intumex MG. The pipes must be suspended 0 mm on both sides from walls or on the top of floor constructions. Detail GG Steel pipes Table Steel pipes Classification with insulation thickness -3 mm, B-s3, d0 Steel pipes with combustible insulation and Intumex Wrap layer Intumex -CSP x 0 mm Ø 0 / s,0/, - Ø 0 / s0,0/, EI 0-U/C EI 0-U/C s Pipe wall thickness in mm Table The field of application given for metal pipes with lower heat conductivity λ W/mK and a melting point 03 C (e.g. stainless steel, cast iron, Nialloys (NiCr, NiMo and NiCu alloys). Detail HH Non combustible pipes with combustible insulation Copper pipes Table Copper pipes Classification with insulation thickness -3 mm, B-s3, d0 Copper pipes with combustible insulation and Intumex Wrap layer Intumex -CSP x 0 mm Ø 0 / s,0/, - Ø, / s,0/, EI 0-U/C EI 0-U/C s Pipe wall thickness in mm Table Results of copper pipes are valid for steel pipes but not vise versa and for pipes with λ 30 W/mK and a melting point of 03 C. Detail II Non combustible pipes with combustible insulation