TEXAS TECH UNIVERSITY HEALTH SCIENCES CENTER MEDICAL SCIENCE BUILDING II EARLY GMP SUB SELECTION REQUEST FOR PROPOSAL

Transcription

1 TEXAS TECH UNIVERSITY HEALTH SCIENCES CENTER MEDICAL SCIENCE BUILDING II El Paso, Texas EARLY GMP SUB SELECTION REQUEST FOR PROPOSAL for the BUILDING CONCRETE GLASS AND GLAZING FIRE SPRINKLER MECHANICAL ELECTRICAL SCOPES OF WORK PREPARED BY: SUNDT CONSTRUCTION, INC. April 10, 2017

2 Concrete, Glass, Elevators, Fire Sprinkler, Mechanical, and Electrical INVITATION Sundt Construction, Inc., as the Construction Manager at Risk (CMAR), for the Medical Science Building II at Texas Tech University Health Sciences Center in El Paso, Texas (Owner) is seeking GMP Proposals for design phase assistance and construction services (pending mutual agreement on a GMP) from qualified subcontractors for the trades identified on the cover sheet of this invitation. The selected firm will work with Sundt Construction, Inc., Perkins + Will Architects and all of their Sub Consultants, and Broaddus and Associates as the Owner s Representative to develop pricing, schedules, constructability, and details as necessary for the construction of new 219,900 SF Medical Science Building II in El Paso, Texas. Proposal Submittal: Proposals will be received until 5:00 p.m. MST, April 20, Proposal Submission: Please submit one (1) electronic copy to Jon Schwab at jpschwab@sundt.com; except for Building Concrete GMP proposals which will need to be submitted to Steve Niskanen at sniskanen@broaddusassociates.com. Project Description: The project is a new, five-level concrete structure with a mezzanine totaling approximately 219,900 gross SF including an auditorium, classrooms, dining, library, laboratory space with support areas, president s office, and shell space at levels 2 and 3. There are seven (7) additive Alternates that could potentially increase the scopes of work. The successful firm will actively participate during preconstruction services and construction based on the Package 1 set of documents. (See enclosed schedule for durations.) Please refer all questions to me at Sundt Construction, Inc. (480) or via jpschwab@sundt.com. Please do not contact any of the Architects, Engineers, Consultants, or Owner directly. Thank you. Sincerely, SUNDT CONSTRUCTION, INC. Jon P. Schwab Preconstruction SUNDT CONSTRUCTION, INC. PAGE 1 OF 7 REQUEST FOR PROPOSAL

3 Submitted by: FIRM: SUBMITTAL FORM ADDRESS: CONTACT: TITLE: PHONE: FAX: The purpose of this RFP is to select the Building Concrete, Glass & Glazing, Fire Sprinkler, HVAC/Plumbing, and Electrical Subcontractors, which will assist in the preconstruction/design phase and perform construction phase services (based upon the successful execution of a GMP Subcontract) for the Texas Tech University Health Sciences Center Medical Sciences Building II () in El Paso, Texas. Sundt Construction, Inc. and (Team) reserve the right to waive any or all informalities or irregularities in any Proposal received. Sundt Construction, Inc. and Texas Tech University also reserve the right to reject any or all Proposals received, to accept a proposal other than the lowest priced proposal and to cancel this RFP as judged solely by the Team. The selection will be based upon the submittal package and a potential interview process, the review of the proposals will determine the list of subcontractors invited to interview. Subcontractors that make the short list will attend an interview, if conducted, to present their proposed staff, project approach, and answer a general range of questions as to their ability to perform the required functions for the project. Selection of the successful subcontractor may be based solely on review of the proposals, or interviews may be conducted with one or more firms. If conducted, subcontractor interviews will be held during the week of May 1, Representatives from selected subcontractors for interviews must include the Project Manager and Lead Estimator as a minimum. There may be other required attendees, but they will be identified if required. The successful proposer will be required to execute a standard Sundt Construction, Inc. Subcontractor Agreement. Any and all exceptions to this agreement must be submitted with your proposal. A sample Subcontract Agreement Exhibit B ; a list of standard and customary Reimbursable Costs Exhibit A, and a Project Schedule Exhibit C are enclosed for your review. All costs incurred by Proposer during the GMP will be included in the GMP, and will not be reimbursed. The successful Subcontractor will be issued a Contract for the preconstruction phase of the project; and a supplement to the Contract will be issued for the construction phase of the Contract. If the Subcontractor and Sundt Construction cannot reach an agreement as to the scope, schedule, and cost after the issuance of the Package 2 documents pricing has been submitted in accordance with the timeline stared in the Estimated Costs section below, the construction phase supplement will not be issued, and the project will be competitively bid. Please acknowledge receipt of Exhibits A to M on the Bid Form (Exhibit D). SUNDT CONSTRUCTION, INC. PAGE 2 OF 7 REQUEST FOR PROPOSAL

4 Scope of Work Description The basis for the Guaranteed Maximum Price for the respective scopes of work for each of the trades listed on the Cover Sheet, will be based on the Construction Documents Bid Package 1 provided by Perkins + Will, dated April 7, 2017, and Packages 2 & 3 that were issued as part of the 100% Design Development documents that were issued on March 3, Estimated Costs The Subcontractor shall work with Sundt Construction, Inc. and the Perkins + Will Architects design team to define systems, offer alternative systems and pricing, develop schedules, select materials and equipment, perform constructability reviews, maintain open and transparent communication via virtual or face to face meetings, and determine the most cost effective installation to control the cost to an established Interim GMP Estimate based on the Bid Package 1 documents. The intent of the GMP Documents is to include ALL of the work required to complete the project, whether or not it is shown on the GMP Documents. The GMP Documents are not complete at this time. The GMP shall include all costs as applicable for engineering, labor, material, delivery, freight, layout, supervision, equipment, hoisting, uncrating, setting, installation, parking, storage, insurance, taxes, detailing, shop drawings, submittals, samples, mock-ups, overhead, profit and other services necessary to complete the work as indicated of specified. All work shown on the Contract Documents and any work described therein which is inferable from or is the logical extension of the Contract Documents for completion of the project shall be considered as part of the work, and shall be included and executed by the Trade Contractors or Vendors in the same manner and with the same character of material as other portions of the work without an increase in the Contract Sum. This process will require the Subcontractor to submit and maintain throughout the preconstruction and construction phases an estimating system, which will be the basis for budget control. The Team expectations are that clarifications shall accompany the estimates at all milestones, including any variation from the design documents. All of the estimates will be subject to audit by the Team, until the execution of the GMP at which time the contracts will converted to a firm fixed price. The Subcontractor should plan on completing the following milestone estimates with enough detail to adequately analyze them including identification costs of work (quantities, unit prices, etc.), preconstruction costs and any contingencies starting with the interim GMP estimate based on Bid Package 1 (subject to change): I. Package 1: Interim GMP Documents to be issued on April 7, 2017 Interim GMP Estimate due on April 20, 2017 Anticipated GMP Subcontractors Award date: May 02, 2017 II. Package 2 100% CD Documents to be issued on June 9, % Confirming Estimate due on June 30, 2017 Estimate validation with GMP Subcontractors week of July 3, 2017 Decision to use GMP Subcontractors or bid those trades week of July 3, 2017 SUNDT CONSTRUCTION, INC. PAGE 3 OF 7 REQUEST FOR PROPOSAL

5 III. Package 3: 100% CD Documents to be issued on September 5, 2017 Estimates due on September 26, 2017 On site mobilization would take place on May 10, 2017 (subject to change). Responses to the following sections: I, II, III, IV, and V, should be in a separate document provided in the following format: I. EXPERIENCE List your company s experience on similar projects, including a narration pertaining to design assist and design build projects. Include two references with current phone numbers for each project. II. SAFETY List your company s Experience Modification Ratio (EMR) for the last three years, and describe your firm s in-house safety program. III. ESTIMATING, COST CONTROL, SCHEDULING Submit samples of your estimating systems; showing breakdown of systems and cost control, and scheduling systems. Explain how you intend to use them to control budget and cost. IV. PROJECT TEAM Submit resumes of the proposed key staff members; include at least three client references, including contact names and phone numbers; state their role, anticipated involvement, and individual qualifications pertinent to this project. The proposed Project Team must be committed for the duration of the project. You will be required to sign a key personnel clause, ensuring the proposed staff will be assigned to this project for its duration. Include an organizational chart of your team. Your Lead Estimator and Project Manager must be available for the interview as scheduled. V. BACKLOG Submit your company backlog, with manpower commitments, for the project duration shown on the Project Schedule Exhibit C. VI. WAGES A. Provide composite crew hourly rates for field and shop labor including all Burden, Fringes, Subsistence, etc. (Expand the list as required, include all personnel which will be assigned to the project and shop labor for work fabricated at your home facility.) These rates will be used throughout the project, include any anticipated rate increases and the date they will be expected to become effective. All project labor and supporting documentation will be submitted with each monthly pay application. SUNDT CONSTRUCTION, INC. PAGE 4 OF 7 REQUEST FOR PROPOSAL

6 B. Trade overtime rates below should be based on time and a half. Each Trade Composite Crew Rates: SHOP FIELD Trade Straight Time Overtime Straight Time Overtime 1. $ /HR $ /HR $ /HR $ /HR 2. $ /HR $ /HR $ /HR $ /HR 3. $ /HR $ /HR $ /HR $ /HR 4. $ /HR $ /HR $ /HR $ /HR 5. $ /HR $ /HR $ /HR $ /HR 6. Project Superintendent $ / HR 7. Project Manager $ / HR VII. COST OF THE WORK A. Material & Equipment Cost are as follows: Materials Actual Costs From Invoices Fixed Equipment Actual Costs From Invoices Freight, Unload, Delivery Actual Costs From Invoices Expediting Actual Costs From Invoices Insurance Actual Costs From Invoices Second Tier Subcontractors Actual Costs From Invoices/Subcontracts Inventory Wholesale Book Costs Small Tools Wholesale Book Costs Warranty Costs Lump Sum Within the GMP B. Construction Related Equipment (rates include maintenance, fuel, oil, and grease): 1. For equipment owned by the Subcontractor the rental rates shall not exceed an average of three (3) local rental company rates. 2. For Equipment from an Outside Rental Company shall be actual rental rate. VIII. OVERHEAD, PROFIT, and CONTINGENCY A. Overhead and Profit percentages (O & P) that will be used as the O & P multiplier for all job costs including change orders will be based on Section 11.8 of the Uniform General Conditions in Specification Section (Perkins + Will March 03, 2017 Documents). B. For a contract based on a Guaranteed Maximum Price (GMP) the Construction Manager-at-Risk (CMAR) shall not be entitled to a percentage mark-up on any change order work unless the Change Order increases the GMP. By inference this will include any Subcontractors who are contracted to a GMP contract. (Uniform General Conditions in Specification Section : Perkins + Will March 03, 2017 Documents) SUNDT CONSTRUCTION, INC. PAGE 5 OF 7 REQUEST FOR PROPOSAL

7 C. Identify on the GMP Bid Form (Exhibit D) the amount of contingency and associated risk description for applicable scopes of work. Three (3) line items have been included for contingencies (add others, if required). IX. Texas HUB Program A. All bidders shall include the applicable dollars and/or percentage of participation by Historically Underutilized Businesses (HUB) Program Subcontractors and Sub- Subcontractors on this Bid Form. 1. We are a Texas HUB Certified firm. YES NO 2. Amount of participation by Certified HUB Firms (if the answer is No to A.1 above): 1st Tier Subcontractor $ or % 2nd Tier Subcontractor $ or % B. All Texas HUB Enterprises must maintain their certification through final completion of the project. C. Information for current HUB certifications can be found on the following website: X. SUBCONTRACT AGREEMENT In submitting this Proposal as described herein, we have reviewed and agree to all terms stated in SUNDT CONSTRUCTION, INC. s Subcontract Agreement. (initials) If left blank this Proposal will be deemed non-responsive. XI. PERFORMANCE AND PAYMENT BOND PREMIUM Based on the GMP Estimate noted above in the Estimated Costs section above, what would the amount be for the Performance and Payment Bond premium in dollars? It is understood that this Proposal shall remain in effect, and may not be withdrawn, for a period of Ninety (90) days after the scheduled closing date for receipt of proposal. FIRM: SIGNED: TITLE: DATE: SUNDT CONSTRUCTION, INC. PAGE 6 OF 7 REQUEST FOR PROPOSAL

8 GMP DOCUMENTS: EXHIBIT A Standard and Customary Reimbursable Costs EXHIBIT B Sample Subcontract and Design-Build Subcontract EXHIBIT C Project Schedule, dated March 23, 2017 EXHIBIT D GMP Estimate Form (Including HUB Commitment) EXHIBIT D Concrete Only Supplemental Bid Form EXHIBIT E GMP Scoring Sheets EXHIBIT F Trade Specific Scopes (Building Concrete, Glass and Glazing, Plumbing, Fire Sprinkler, HVAC, and Electrical) EXHIBIT G List of Contract Documents (100% DD Package 2 & 3, dated March 3, 2017 & Construction Docs Bid Package 1, dated April 7, 2017) EXHIBIT H Prevailing Wages per Specification Section EXHIBIT I EXHIBIT J EXHIBIT K EXHIBIT L EXHIBIT M EXHIBIT N EXHIBIT O EXHIBIT P EXHIBIT Q EXHIBIT R * Available upon request Sample Trade Interface Agreement Site Logistics Plan Sample Code of Safe Practices Textura Overview Subcontractor s Liability Insurance Policy Quality Management Program Addenda *Sundt Construction Water Intrusion Prevention and Control Plan *Contract between Sundt Construction and the Owner *Guide to Loss Control SUNDT CONSTRUCTION, INC. PAGE 7 OF 7 REQUEST FOR PROPOSAL